LUM-MULTICAST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
11
Rows
11
Columns
219
.1.3.6.1.4.1.8708.2.37.2.2.1 · 1 row entry · 14 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastIfTable'
The IP multicast interface list.
multicastIfEntry row .1.3.6.1.4.1.8708.2.37.2.2.1.1
An entry in the IP multicast interface list.
Each entry represents a physical port.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.2.1.1.1
The management name of the interface, for example
'port:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.2.1.1.2
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.2.1.1.3
Define the protocol type used for IP multicast. if IGMP snooping is enabled on the interface.

off - IGMP snooping is disabled on the interface

igmp - IGMP snooping is enabled on the interf…
Enumerationr/w
Enumerated Values:
1off
2igmp
.1.3.6.1.4.1.8708.2.37.2.2.1.1.4
Indicate if the interface can be connected to a multicast router.
LUM-TCEnableDisabler/w
Type Values:
1disabled
2enabled
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.2.1.1.5
Indicate if IGMP v2 leave group message is enabled.
LUM-TCEnableDisabler/w
Type Values:
1disabled
2enabled
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.2.1.1.6
Indicate how susceptible the network is to lost packets. IGMP can
recover from robustness variable minus 1 lost IGMP packets.
Unsigned32r/w
Constraints:
range: 1-7
.1.3.6.1.4.1.8708.2.37.2.2.1.1.7
Control whether IPv4 multicast frames in the reserved range (224.0.0.X)
are flooded to the VLAN.
LUM-TCEnableDisabler/w
Type Values:
1disabled
2enabled
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.2.1.1.8
Create a static entry in the membership table.

Port - The name of the interface

Identifier - Unique identifier for the static member

VLAN ID - VLAN identity (1 to 4094)
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.2.1.1.9
Limit for the maximum number of members allowed for a port.
The limit prevents new dynamic members to be added (if over
the set limit), existing members are not removed.
Statically provisioned entries are included in th…
Unsigned32r/w
Constraints:
range: 0-1000
.1.3.6.1.4.1.8708.2.37.2.2.1.1.10
The current number of static IGMP members associated with this
interface (port).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.2.1.1.11
Filter the membership table.

Data type for configuration of the filter are,

Port - The port identity.

VLAN ID - VLAN identity (1 to 4094)

Type - User defined m…
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.2.1.1.12
Filter the forwarding table.

Data type for configuration of the filter are,

Type - ASM only (Any-Source Multicast)
ASM & SSM

Source address - IPv4 source address. Not …
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.2.1.1.13
Deletes entries in the membership table.
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.2.1.1.15
.1.3.6.1.4.1.8708.2.37.2.3.1 · 1 row entry · 12 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastMembershipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastMembershipTable'
The IP multicast membership list.
multicastMembershipEntry row .1.3.6.1.4.1.8708.2.37.2.3.1.1
An entry in the IP multicast membership list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.3.1.1.1
The management name of the entry, for example
'member:1:2:identifier', where the first number indicates
subrack, the second slot number and the third
is the unique identifier.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.3.1.1.2
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.3.1.1.3
Unique identifier for the multicast route.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-21
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.3.1.1.4
The IP address of the source for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.3.1.1.5
The IP address of the group for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.3.1.1.6
VLAN ID for this entry.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.3.1.1.7
The interface (port) to which this entry is connected.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.3.1.1.8
The time since this entry was learned by the router or
created by the user.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.3.1.1.9
The minimum time remaining until the entry will be
aged out. The value zero indicates that the entry is
not subject to aging.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.3.1.1.10
Indicates if this entry is configured by the user or
learned dynamically.
Enumeration
Enumerated Values:
1user
2dynamic
.1.3.6.1.4.1.8708.2.37.2.3.1.1.11
The IP address of the host reporting the channel.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.3.1.1.12
.1.3.6.1.4.1.8708.2.37.2.4.1 · 1 row entry · 8 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastForwardingTable'
The IP multicast forwaring list.
multicastForwardingEntry row .1.3.6.1.4.1.8708.2.37.2.4.1.1
An entry in the IP multicast forwarding list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.4.1.1.1
The management name of the entry, for example
'fwd:1:2:34', where the first number indicates
subrack, the second slot number and the third
is a counter.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.4.1.1.2
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.4.1.1.3
The IP address of the source for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.4.1.1.4
The IP address of the group for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.4.1.1.5
VLAN ID for this entry.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.4.1.1.6
Value is true if this entry have been used to forward traffic
since the last read of this entry.

If two entries are the same except that one is ASM and one is
SSM, the value will be true only for the SSM …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.4.1.1.7
The interface (port) to which this entry is connected.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.4.1.1.8
.1.3.6.1.4.1.8708.2.37.2.5.1 · 1 row entry · 18 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastIgmpPmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastIgmpPmTable'
The IGMP snooping statistics for a specific port.
multicastIgmpPmEntry row .1.3.6.1.4.1.8708.2.37.2.5.1.1
An entry in interface table.
Column Syntax OID
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.5.1.1.1
The management name of the interface, for
example 'port:1:2:1-2'.
(port:[subrack]:[slot]:[Tx port]-[Rx port]).
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.5.1.1.2
The number of received IGMP v1 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.3
The number of received IGMP v2 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.4
The number of received IGMP v3 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.5
The number of transmitted IGMP v1 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.6
The number of transmitted IGMP v2 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.7
The number of transmitted IGMP v3 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.8
The number of received IGMP queries.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.9
The number of transmitted IGMP queries.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.10
The number of received IGMP v2 leave reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.11
The number of transmitted IGMP v2 leave reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.12
The number of received IGMP messages with checksum errors (IP or IGMP).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.13
The number of received IGMP messages with unknown type.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.14
The number of received IGMP messages with illegal length.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.15
The number of IGMP host reports dropped due to out of resources.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.16
The number of IGMP members (both static and dynamic) on this
interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.5.1.1.17
Reset the counters.
After a successful reset the default value
(normal) is restored in this action attribute.
LUM-TCPmResetr/w
Type Values:
1normal
2reset
Description:
'Action' for reseting performance counters.
.1.3.6.1.4.1.8708.2.37.2.5.1.1.18
.1.3.6.1.4.1.8708.2.37.2.6.1 · 1 row entry · 14 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastMcVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastMcVlanTable'
The IP multicast MCVLAN list.
multicastMcVlanEntry row .1.3.6.1.4.1.8708.2.37.2.6.1.1
An entry in the IP multicast MCVLAN list.
Each entry represents a MCVLAN.
Column Syntax OID
An table unique index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.6.1.1.1
The management name of the MCVLAN, for example
'mcvlan:1:2:100', where the first number indicates
subrack, the second slot number and the third is the VLAN number
connected to the MCVLAN object.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.6.1.1.2
Specifies the vlan that is used for transporting multicast traffic.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.6.1.1.3
The number of the subrack.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.37.2.6.1.1.4
The slot number.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.37.2.6.1.1.5
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.6.1.1.6
Define the mode used for IP multicast.
If IGMP or MLD snooping are enabled on the MCVLAN and if
the groups are learnt or not.

static - only static entries are supported on the multicast VLAN
igm…
Enumerationr/w
Enumerated Values:
1static
2igmp
3mld
4igmpForward
5mldForward
.1.3.6.1.4.1.8708.2.37.2.6.1.1.7
Indicate if IGMP leave and MLD done group message is enabled, only valid if igmp/mld is enabled
LUM-TCEnabledDisabledWithNAr/w
Type Values:
1disabled
2enabled
2147483647notApplicable
Description:
disabled - Attribute is not set.

enabled - Attribute is set.

notApplicable (2147483647) is used when attribute is
not used in current configuration.
.1.3.6.1.4.1.8708.2.37.2.6.1.1.8
Indicate how susceptible the network is to lost packets. IGMP/MLD can
recover from robustness variable minus 1 lost IGMP/MLD packets.
Unsigned32r/w
Constraints:
range: 1-7
.1.3.6.1.4.1.8708.2.37.2.6.1.1.9
Internal ID is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.6.1.1.10
The current number of static IGMP/MLD members associated with this
MCVLAN.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.6.1.1.11
Create a static entry in the static member table.

MC VLAN - VLAN identity (1 to 4094), previously created in VLAN map

Port - The name of the interface

Type - IPv4 or IPv6
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.6.1.1.12
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8708.2.37.2.6.1.1.13
When this feature is set to igmpMldDiscard then IP MC Control protocol packets (IGMP or MLD) for the non-selected mode are discarded.
If mode is set to igmp or igmpForward and this feature is set to igmpMldDiscard the…
LUM-TCOtherMccpr/w
Type Values:
1igmpMldDiscard
2igmpMldTransparent
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.6.1.1.14
.1.3.6.1.4.1.8708.2.37.2.7.1 · 1 row entry · 15 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastMcVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastMcVlanPortTable'
The MCVLAN port list.
multicastMcVlanPortEntry row .1.3.6.1.4.1.8708.2.37.2.7.1.1
An entry in the MCVLAN ports list.
Each entry represents a port in each of the registered
MCVLANs
Column Syntax OID
An table unique index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.7.1.1.1
The management name of the MCVLAN port object, for example
'mcvlanport:1:2:100:1:1-2', where the first number indicates
subrack, the second slot number, the third is the connected MCVLAN, the fourth is
the interface and…
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.2
Specifies the vlan that is used for transporting multicast traffic.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.7.1.1.3
The number of the subrack.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.4
The slot number.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.5
The interface number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.6
The Tx port number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.7
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.7.1.1.8
Indicate if the MCVLAN port can be connected to a multicast router.
LUM-TCEnabledDisabledWithNAr/w
Type Values:
1disabled
2enabled
2147483647notApplicable
Description:
disabled - Attribute is not set.

enabled - Attribute is set.

notApplicable (2147483647) is used when attribute is
not used in current configuration.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.9
Control whether IPv4/IPv6 multicast frames in the reserved range
are flooded to the VLAN.
LUM-TCEnableDisabler/w
Type Values:
1disabled
2enabled
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.10
Enable/disable the MCVLAN port as IP multicast flood port. Enabled IP multicast
flood ports will receive flooded IP multicast frames from all ports belonging to the
multicast VLAN.
LUM-TCEnableDisabler/w
Type Values:
1disabled
2enabled
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.7.1.1.11
Limit for the maximum number of members allowed for a McVlan port.
The limit prevents new dynamic members to be added (if over
the set limit), existing members are not removed.
Statically provisioned entries are include…
Unsigned32r/w
Constraints:
range: 0-1000
.1.3.6.1.4.1.8708.2.37.2.7.1.1.12
Internal ID is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.7.1.1.13
The current number of static IPv4/IPv6 multicast members associated with this
MCVLAN port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.7.1.1.14
Define the mode used for IP multicast vlan.
Enumeration
Enumerated Values:
1static
2igmp
3mld
4igmpForward
5mldForward
.1.3.6.1.4.1.8708.2.37.2.7.1.1.15
.1.3.6.1.4.1.8708.2.37.2.8.1 · 1 row entry · 17 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastStaticMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastStaticMemberTable'
The IP multicast staticMember list.
multicastStaticMemberEntry row .1.3.6.1.4.1.8708.2.37.2.8.1.1
An entry in the IP multicast staticMember list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.8.1.1.1
The management name of the entry, for example
'static:1:2:identifier', where the first number indicates
subrack, the second slot number and the third
is the unique identifier.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.8.1.1.2
The number of the subrack.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.37.2.8.1.1.3
The slot number.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.37.2.8.1.1.4
The connected port for SNMP purposes
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.8.1.1.5
The interface number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.8.1.1.6
The Tx port number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.8.1.1.7
VLAN ID for this entry.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.8.1.1.8
Multicast static members internal id is used for index calculations.
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.8.1.1.9
Indicates if this entry is configured for IPv4 or IPv6.
Enumeration
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.8708.2.37.2.8.1.1.10
The IPv4 address of the source for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.8.1.1.11
The IPv4 address of the group for this entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.8.1.1.12
The IPv6 address of the source for this entry.
LUM-TCInetAddressIPv6r/w
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.8.1.1.13
The IPv6 address of the group for this entry.
LUM-TCInetAddressIPv6r/w
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.8.1.1.14
The IPv6 address of the source for this entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.8.1.1.15
The IPv6 address of the group for this entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.8.1.1.16
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8708.2.37.2.8.1.1.17
.1.3.6.1.4.1.8708.2.37.2.9.1 · 1 row entry · 21 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastMemberTable'
The IP multicast member list.
multicastMemberEntry row .1.3.6.1.4.1.8708.2.37.2.9.1.1
An entry in the IP multicast member list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.9.1.1.1
The management name of the entry, for example
'member:1:2:identifier', where the first number indicates
subrack, the second slot number and the third
is the unique identifier.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.9.1.1.2
The interface number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.9.1.1.3
The Tx port number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.9.1.1.4
VLAN ID for this entry.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.9.1.1.5
Indicates if this entry is configured by the user (static) or
learned dynamically.
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.8708.2.37.2.9.1.1.6
multicast static members internal id is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.9.1.1.7
Indicates if this entry is configured for IPv4 or IPv6.
Enumeration
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.8708.2.37.2.9.1.1.8
The IPv4 address of the source for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.9.1.1.9
The IPv4 address of the group for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.9.1.1.10
The IPv6 address of the source for this entry.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.11
The IPv6 address of the group for this entry.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.12
The IPv6 address of the source for this entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.13
The IPv6 address of the group for this entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.14
The IPv4 address of the host reporting the channel.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.9.1.1.15
The IPv6 address of the host reporting the channel.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.16
The time since this entry was learned by the router or
created by the user.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.9.1.1.17
The minimum time remaining until the entry will be
aged out. '-' indicates that the entry is
not subject to aging.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.9.1.1.18
The port where the member resides
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.9.1.1.19
Manages deletion of conceptual rows.
See also SNMPv2-TC.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8708.2.37.2.9.1.1.20
Value is true if this entry matches a set of filters.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.9.1.1.21
.1.3.6.1.4.1.8708.2.37.2.10.1 · 1 row entry · 29 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastForwardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastForwardTable'
The IP multicast forward list.
multicastForwardEntry row .1.3.6.1.4.1.8708.2.37.2.10.1.1
An entry in the IP multicast forward list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.1
The management name of the entry, for example
'fw:1:2:identifier', where the first number indicates
subrack, the second slot number and the third
is the unique identifier.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.10.1.1.2
VLAN ID for this entry.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.10.1.1.3
multicast forward internal id is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.10.1.1.4
Indicates if this entry is configured for IPv4 or IPv6.
Enumeration
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.8708.2.37.2.10.1.1.5
The IPv4 address of the source for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.10.1.1.6
The IPv4 address of the group for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.10.1.1.7
The IPv6 address of the source for this entry.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.10.1.1.8
The IPv6 address of the group for this entry.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.10.1.1.9
The IPv6 address of the source for this entry.
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.10.1.1.10
The IPv6 address of the group for this entry.
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.10.1.1.11
Value is true if this entry have been used to forward traffic
since the last read of this entry.

If two entries are the same except that one is ASM and one is
SSM, the value will be true only for the SSM …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.10.1.1.12
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.13
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.14
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.15
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.16
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.17
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.18
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.19
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.20
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.21
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.22
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.23
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.24
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.25
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.26
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.27
The ports belonging to the forwarding entry.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.10.1.1.28
Value is true if this entry matches a set of filters.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.10.1.1.29
.1.3.6.1.4.1.8708.2.37.2.11.1 · 1 row entry · 46 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastFilterTable'
The multicast filter list.
multicastFilterEntry row .1.3.6.1.4.1.8708.2.37.2.11.1.1
An entry in the multicast filter list.
Column Syntax OID
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.11.1.1.1
The management name, where the first number indicates
subrack, the second slot number.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.2
The number of the subrack.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.3
The slot number.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.4
Filter for VLAN ID on forward table.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.11.1.1.5
Filter for Ipv4/Ipv6 on forward table.
Enumeration
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.8708.2.37.2.11.1.1.6
Filter for IPv4 source address on forward table.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.11.1.1.7
Filter forward table on group IPv4 address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.11.1.1.8
Filter forward table on source IPv6 address.
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.9
Filter forward table on group IPv6 address.
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.10
Enable filter of IP type on forward entries.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.11
Enable filter of VLAN ID on forward table
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.12
Filter enabled on group address for forward table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.13
Filter enabled on VLAN ID for forward table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.14
Filter enabled on IP type for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.15
Filter enabled on VLAN ID for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.16
Filter enabled on port for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.17
Filter enabled on type for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.18
Filter member table on VLAN ID.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.11.1.1.19
Filter member table on IPv4 or IPv6
Enumeration
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.8708.2.37.2.11.1.1.20
Filter member table on port.
SNMPv2-TCDisplayString
Constraints:
range: 1-46
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.21
The interface number of member port filter.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.22
The Tx port number of the member port filter.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.23
Internal port reference for traffic unit of member port filter.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.37.2.11.1.1.24
Filter member table on type of entry (static or dynamic).
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.8708.2.37.2.11.1.1.25
Filter id is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.26
Filter the forwarding table. Applying a new filter overwrites
the current filter (if there is a active filter)
Note, filter is not saved and will not be restored after a reboot.
Data types for configuration of the filte…
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.11.1.1.27
Clear any applied filter for the forwarding table.
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.11.1.1.28
Filter the member table. Applying a new filter overwrites
the current filter (if there is a active filter)
Note, filter is not saved and will not be restored after a reboot.
Data types for configuration of the filter ar…
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.11.1.1.29
Clear any applied filter for the member table.
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.11.1.1.30
Deletes entries in the member table
MC VLAN - VLAN identity (1 to 4094)
IP type - Ipv6 of Ipv4.
Port - port
Group - group address
Reporter - reporter address
LUM-TCCommandString
Description:
tbd
.1.3.6.1.4.1.8708.2.37.2.11.1.1.31
Filter enabled on group address for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.32
Filter enabled on source address for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.33
Filter enabled on reporter address for member table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8708.2.37.2.11.1.1.34
Filter member table on group IPv4 address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.11.1.1.35
Filter member table on group IPv6 address.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.36
Filter member table on source IPv4 address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.11.1.1.37
Filter member table on source IPv6 address.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.38
Filter member table on reporter IPv4 address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.37.2.11.1.1.39
Filter member table on reporter IPv6 address.
LUM-TCInetAddressIPv6
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
.1.3.6.1.4.1.8708.2.37.2.11.1.1.40
Number of entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.41
Number of user defined (static) entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.42
Number of learned entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.43
Number of filtered entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.44
Number of filtered user defined (static) entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.45
Number of filtered learned entries in the membership table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.11.1.1.46
.1.3.6.1.4.1.8708.2.37.2.12.1 · 1 row entry · 25 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk multicastIpMcPmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MULTICAST-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MULTICAST-MIB::multicastIpMcPmTable'
The IPMC snooping statistics for a specific MCVlan port.
multicastIpMcPmEntry row .1.3.6.1.4.1.8708.2.37.2.12.1.1
An entry in interface table.
Column Syntax OID
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.37.2.12.1.1.1
The management name of the interface, for
example mcvlanport:1:2:100:1:1-2.
(mcvlanport:[subrack]:[slot]:[mcVlan]:[IfNo]:[Tx port]-[Rx port]).
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.37.2.12.1.1.2
VLAN ID for this entry.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.37.2.12.1.1.3
Define the mode used for IP multicast vlan.
Enumeration
Enumerated Values:
1static
2igmp
3mld
4igmpForward
5mldForward
.1.3.6.1.4.1.8708.2.37.2.12.1.1.4
The interface number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.12.1.1.5
The Tx port number.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
.1.3.6.1.4.1.8708.2.37.2.12.1.1.6
multicast ipmc pm internal id is used for index calculations
The number is unique and generated by system.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.7
The number of received IGMP v1 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.8
The number of received IGMP v2 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.9
The number of received IGMP v3 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.10
The number of transmitted IGMP v1 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.11
The number of transmitted IGMP v2 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.12
The number of transmitted IGMP v3 memberships reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.13
The number of received IGMP queries.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.14
The number of transmitted IGMP queries.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.15
The number of received IGMPv2 leave reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.16
The number of transmitted IGMPv2 leave reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.17
The number of received MLD v1 done reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.18
The number of transmitted MLD v1 done reports.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.19
The number of received IGMP/MLD messages with checksum errors (IP or IGMP/MLD).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.20
The number of received IGMP/MLD messages with unknown type.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.21
The number of received IGMP/MLD messages with illegal length.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.22
The number of IGMP/MLD host reports dropped due to out of resources.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.23
The number of IPMC members (both static and dynamic) on this
interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.37.2.12.1.1.24
Reset the counters.
After a successful reset the default value
(normal) is restored in this action attribute.
LUM-TCPmResetr/w
Type Values:
1normal
2reset
Description:
'Action' for reseting performance counters.
.1.3.6.1.4.1.8708.2.37.2.12.1.1.25