LUM-MCLAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
15

mclagTable

table
.1.3.6.1.4.1.8708.2.62.2.2.1 · 1 row entry · 15 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk mclagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MCLAG-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MCLAG-MIB::mclagTable' 
The MC-LAG RG list.
mclagEntry row .1.3.6.1.4.1.8708.2.62.2.2.1.1
An entry in the MC-LAG RG list.
Indexes
Column Syntax OID
mclagIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.1
mclagName
The management name of the MC-LAG, for example
'mcLag:1:2:TM-LAG' (mcLag:[subrack]:[slot]:[LAG identifier])
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.2
mclagDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.3
mclagNodeId
Used to ensure that the LACP Port Numbers are unique across all PE:s in a Redundancy Group.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.4
mclagRgId
The Redundancy Group ID of the ICCP channel being used.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.5
mclagSynchronizationStatus
synchronized - The MC-LAG has received the configuration TLVs from its peer.
unSynchronized - The MC-LAG has not yet received the configuration TLVs from its peer or the information in
the received TLVs prevents the MC-…
Enumeration
Enumerated Values:
1unSynchronized
2synchronized
3undefined
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.6
mclagControlledLag
The identifier of the controlled LAG.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.7
mclagLagAdminSystemPrio
The Administrative System Priority is used in the initial negotiation with the other PE in the Redundancy Group.
It is necessary for all PE:s in a Redundancy Group to agree upon the System MAC Address and System Priorit…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.8
mclagLagOperSystemPrio
The Operational System Priority is the result of the initial negotiation. Every PE use the values for System MAC Address and System Priority that are supplied
by the PE with the numerically lowest value (among RG member…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.9
mclagLagAdminPortPrio
The Administrative Port Priority is used on all LACP ports in the controlled LAG.

Note! A change of the Administrative Port Priority may cause a traffic disturbance.

This attribute can be w…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.10
mclagLagOperPortPrio
The Operational Port Priority is used on all LACP ports in the controlled LAG.
0 is only used in undefined and unSynchronized synchronization states.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.11
mclagLagStatus
active - The LACP selection logic of the controlled LAG has determined that a local port has a higher Port Aggregation Priority.
standby - The LACP selection logic of the controlled LAG has determined that a remote port…
Enumerationr/w
Enumerated Values:
1standby
2active
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.12
mclagProtectionStateFailure
alarm - The ICCP RG does not have the Communication Failure alarm set and both the local and remote LAG has the LAG failure alarm active.

ok - One of the members in the RG is active or the ICCP RG has the…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.13
mclagProtectionStateDegraded
alarm - The ICCP RG has the Communication Failure alarm active, or either the local or remote LAG has the LAG failure alarm active.

ok - The ICCP RG does not have the Communication Failure alarm set and n…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.14
mclagInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.62.2.2.1.1.15