LUM-IFSONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

ifSonetSectionTable

table
.1.3.6.1.4.1.8708.2.53.2.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifSonetSectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFSONET-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFSONET-MIB::ifSonetSectionTable' 
The section group contains information and
configuration for the section.
ifSonetSectionEntry row .1.3.6.1.4.1.8708.2.53.2.2.1.1
An entry in the ifSonet section list.
Indexes
Column Syntax OID
ifSonetSectionIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.1
ifSonetSectionName
The management name of the Sonet section, for example
'section:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.2
ifSonetSectionConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.3
ifSonetSectionOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B1 = 0x01
E1 = 0x02
F1 = 0x04
D1-D3 = 0x08
J0 = 0x10
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.4
ifSonetSectionTraceTransmitted
The trace to be transmitted from this interface.

Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.

The trace _notApplicable_ is used …
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.5
ifSonetSectionTraceReceived
The received trace for this interface.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.

The trace _notAvailable_ is used to tell S…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.6
ifSonetSectionTraceExpected
Trace used for matching against the received trace.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.7
ifSonetSectionTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected tr…
LUM-TCEnabledDisabledWithNA
Type Values:
1disabled
2enabled
2147483647notApplicable
Description:
disabled - Attribute is not set.

enabled - Attribute is set.

notApplicable (2147483647) is used when attribute is
not used in current configuration.
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.8
ifSonetSectionTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.9
ifSonetSectionRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.10
ifSonetSectionTraceMismatch
Trace identifier mismatch (TIM).

Indicates if the expected trace identifier differs from the
received trace identifier.

Reference: GR-253/6.2.1.1.9.

alarm: The received trace…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.11
ifSonetSectionLossOfFrame
Rx Section-Loss of frame (LOF).

Reference: GR-253/6.2.1.1.2

alarm: A SECTION frame cannot be located.

ok: A SECTION frame can be located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.12
ifSonetSectionTxLossOfFrame
Tx Section-Loss of frame (LOF).

Reference: GR-253/6.2.1.1.2

alarm: A SECTION frame cannot be located.

ok: A SECTION frame can be located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.13

ifSonetLineTable

table
.1.3.6.1.4.1.8708.2.53.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifSonetLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFSONET-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFSONET-MIB::ifSonetLineTable' 
The line group contains information and
configuration for the line overhead.
ifSonetLineEntry row .1.3.6.1.4.1.8708.2.53.2.3.1.1
An entry in the ifSonet line list.
Indexes
Column Syntax OID
ifSonetLineIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.1
ifSonetLineName
The management name of the Sonet line, for example
'line:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.2
ifSonetLineConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.3
ifSonetLineOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B2 = 0x01
E2 = 0x02
D4-D12 = 0x04
K1-K2 = 0x08
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.4
ifSonetLineTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.5
ifSonetLineRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.6
ifSonetLineRxAlarmIndicationSignal
Rx Line alarm indication signal (AIS).

Reference: GR-253/6.2.1.2.1

alarm: An line AIS signal is detected.

ok: The line AIS is cleared.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.7
ifSonetLineRemoteDefectIndication
Rx Line remote defect indication (RDI).

Reference: GR-253/6.2.1.3

alarm: RDI indication (in frame) active.

ok: RDI indication inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.8
ifSonetLineTxAlarmIndicationSignal
Tx Line alarm indication signal (AIS).

Reference: GR-253/6.2.1.2.1

alarm: An line AIS signal is detected.

ok: The line AIS is cleared.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.9