LUM-IFPHYSICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
43

ifPhysicalTrxTable

table
.1.3.6.1.4.1.8708.2.47.2.2.1 · 1 row entry · 34 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPhysicalTrxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPHYSICAL-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPHYSICAL-MIB::ifPhysicalTrxTable' 
The if physical trx interface list.
ifPhysicalTrxEntry row .1.3.6.1.4.1.8708.2.47.2.2.1.1
An entry in the ifPhysical trx list.
Indexes
Column Syntax OID
ifPhysicalTrxIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.1
ifPhysicalTrxName
The management name of the transceiver, for example
'trx:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.2
ifPhysicalTrxConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.3
ifPhysicalTrxLaserBias
Measures laser bias current value in tenth of
mA (0.1 mA).
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.4
ifPhysicalTrxLaserTemp
The actual laser temperature in units of
0.1 degrees Centigrades.
LUM-TCInteger32WithNA
Type Constraints:
range: 0..2147483647
Description:
An Integer32 of an object between 0 and 2147483645.
2147483647 is used to indicate that the attribute
is not used on the object.
2147483646 is used to indicate that the attribute is not
available currently
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.5
ifPhysicalTrxTrxClass
String that describes the transceiver class.
LUM-TCDisplayStringWithNA
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.6
ifPhysicalTrxTrxMedia
Defines the transceiver media.

For example 'optical' or 'electrical'.
LUM-TCTrxMediaWithNAr/w
Type Values:
0undefined
1optical
2tp1000BaseT
3tp100BaseT
4tp10BaseT
5electrical
2147483646notAvailable
2147483647notApplicable
Description:
Defines the media and capability of the TRX

optical - Optical media

tp1000BaseT - Twisted-pair capable of 1000BaseT

tp100BaseT - Twisted-pair capable of 100BaseT

tp1…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.7
ifPhysicalTrxActualTrxMedia
Defines the media and capability of the TRX.
LUM-TCTrxMediaWithNA
Type Values:
0undefined
1optical
2tp1000BaseT
3tp100BaseT
4tp10BaseT
5electrical
2147483646notAvailable
2147483647notApplicable
Description:
Defines the media and capability of the TRX

optical - Optical media

tp1000BaseT - Twisted-pair capable of 1000BaseT

tp100BaseT - Twisted-pair capable of 100BaseT

tp1…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.8
ifPhysicalTrxTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.9
ifPhysicalTrxRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.10
ifPhysicalTrxTransmitterFailed
Transmitter failed.

The transceiver hardware has detected a failure
in the transmitter part.

Alarm - The transmitter has failed

Ok - The transmitter is OK again
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.11
ifPhysicalTrxNonQualifiedTrx
Non-qualified transceiver.

The inserted transceiver does not have a legal
manufacturer code.

Alarm - A non-qualified transceiver is inserted.

Ok - The transceiver is qualifie…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.12
ifPhysicalTrxTrxMissing
Transceiver missing.

An expected transceiver is missing.

Alarm - An expected transceiver is missing.

Ok - The missing transceiver is inserted.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.13
ifPhysicalTrxTrxMediaMismatch
Transceiver media mismatch.

The TRX media does not match the expected one.

Alarm - Invalid or mismatching trx media is
detected.

Ok - The (pluggable) transceiver or board is
…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.14
ifPhysicalTrxTrxRxState
The current Rx state of the transceiver, in case it is
a coherent CFP. The unit is ready if state=Ready.

The states could be one of the followings:

Rx State: Init started.

Rx…
LUM-TCDisplayStringWithNA
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.15
ifPhysicalTrxTrxTxState
The current Tx state of the transceiver, in case it is
a coherent CFP. The unit is ready if state=Ready.

The states could be one of the followings:

Tx State: Init started.

Tx…
LUM-TCDisplayStringWithNA
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.16
ifPhysicalTrxOpticalLayerMappingMismatch
The inserted transceiver does not support the
configuration of the optical layer mapping.

alarm: A transceiver with other supported optical layer
mapping than the requested mapping is inserted.
…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.17
ifPhysicalTrxPowerCycleReset
When the attribute is set to reset the trx power cycle
is re-initialised, meaning the trx is cold started. Then the attribute is set to normal again
automatically.

Note: This function is only to be used a…
LUM-TCResetWithNA
Type Values:
1reset
2normal
2147483647notApplicable
Description:
When the attribute is set to reset the function is
re-initialised. Then the attribute is set to normal again
automatically.
reset - Re-initialises the function
normal - The function is in normal state
notApplicable - us…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.18
ifPhysicalTrxUId
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.19
ifPhysicalTrxAid
The access identifier (AID) of the trx.
The format is according to GR-833.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.20
ifPhysicalTrxPhysicalLocation
The physical location of the trx.
The format is according to GR-833.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.21
ifPhysicalTrxPowerOutOfRange
The power classification of the transceiver exceeds the design limit of the board.

alarm: A transceiver with a power classification that exceeds
the design limit of the board is inserted.
…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.22
ifPhysicalTrxLowTemp
The temperature of the transceiver is below its designed limit.

alarm: The temperature of the transceiver is below its designed limit.

ok: The temperature of the transceiver is within desig…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.23
ifPhysicalTrxCommunicationFailure
The board is unable to communicate with the transceiver.

alarm: Protocol errors detected on the transceiver control link.

ok: No communication errors detected on the transceiver control lin…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.24
ifPhysicalTrxSignalFormatNotSupported
The signal format is not supported on this transceiver.

alarm: Signal format not supported.

ok: Signal format supported.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.25
ifPhysicalTrxTunable
The transceiver is of tunable type.

true - Inserted TRX is of tunable type
false - Inserted TRX is not of tunable type
notAvailable - Attribute is not available under current circumst…
LUM-TCTruthValueWithNA
Type Values:
0true
1false
2147483646notAvailable
2147483647notApplicable
Description:
Defines a value that can be true, false or not available

true - The condition is false

false - The condition is not true

notAvailable (2147483646) is used when attribute is
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.26
ifPhysicalTrxEncrCommunicationFailure
The board is unable to communicate with the transceiver for
encryption related configuration.

alarm: Protocol errors detected on the transceiver encryption control link.

ok: No communicatio…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.27
ifPhysicalTrxDoesNotSupportEncryption
Non-Encryption capable TRX installed.

alarm: Non-Encryption capable TRX installed.

ok: Encryption capable TRX installed.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.28
ifPhysicalTrxSelfTestDataCorruption
TRX self-test data corruption.

alarm: TRX self-test data is corrupted.

ok: TRX self-test data is okay.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.29
ifPhysicalTrxAutoLambdaCapability
The Auto Lambda capability of the TRX.

none - Inserted TRX does not support auto lambda
notApplicable - Interface does not support auto lambda or TRX is not inserted
dualEndedPeer - TRX for du…
LUM-TCAutoLambdaCapability
Type Values:
0none
1notApplicable
2dualEndedPeer
3singleEndedTee
4singleEndedHee
Description:
Defines the auto lambda capability of the TRX

none - Inserted TRX does not support auto lambda
notApplicable - Interface does not support auto lambda or TRX is not inserted
dualEndedPeer - TRX for…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.30
ifPhysicalTrxSupportedTrxFeatureSets
Supported TRX feature sets.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.31
ifPhysicalTrxExpectedTrxFeatureSet
The Expected Feature Set defines what the corresponding TRX is supposed to support.
Depending on this choice the system will expose configuration options of different
features, like what client formats that can be used.…
LUM-TCFeatureSetr/w
Type Values:
0staticClientsNoGCCa
1dynamicClientsGCCa
2xrStaticClientsGCC
2147483647notApplicable
Description:
Feature set
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.32
ifPhysicalTrxFeatureSetNotSupported
The feature set is not supported on this transceiver.

alarm: TRX feature set not supported.

ok: TRX feature set supported.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.33
ifPhysicalTrxModuleIdentifier
A unique identifier/name assigned to the module.
LUM-TCDisplayStringWithNA
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.2.1.1.34

ifPhysicalCageTable

table
.1.3.6.1.4.1.8708.2.47.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPhysicalCageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPHYSICAL-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPHYSICAL-MIB::ifPhysicalCageTable' 
The if physical cage list.
ifPhysicalCageEntry row .1.3.6.1.4.1.8708.2.47.2.3.1.1
An entry in the ifPhysical cage list.
Indexes
Column Syntax OID
ifPhysicalCageIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.1
ifPhysicalCageName
The management name of the cage, for example
'cage:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.2
ifPhysicalCageConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.3
ifPhysicalCageSubrack
The number of the subrack in which the cage
module is present.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.4
ifPhysicalCageSlot
The number of the slot in which the cage
module is present.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.5
ifPhysicalCageAid
The access identifier (AID) of the cage.
The format is according to GR-833.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.6
ifPhysicalCagePhysicalLocation
The physical location of the cage.
The format is according to GR-833.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.7
ifPhysicalCageEquipped
Is the entity equipped.
LUM-TCTruthValueWithNA
Type Values:
0true
1false
2147483646notAvailable
2147483647notApplicable
Description:
Defines a value that can be true, false or not available

true - The condition is false

false - The condition is not true

notAvailable (2147483646) is used when attribute is
…
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.8
ifPhysicalCageUId
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.47.2.3.1.1.9