LUM-IFMC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
14

ifMcPortTable

table
.1.3.6.1.4.1.8708.2.64.2.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifMcPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFMC-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFMC-MIB::ifMcPortTable' 
The multi-fiber connection (ifMcPort) group contains information and
configuration for peripheral configuration
ifMcPortEntry row .1.3.6.1.4.1.8708.2.64.2.2.1.1
An entry in the ifMcPort list.
Indexes
Column Syntax OID
ifMcPortName
The management name of the object.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.1
ifMcPortIndex
An index assigned to each entry.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.2
ifMcPortDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.3
ifMcPortExpectedType
Device type connected to peer end of a MPO port.

ethernet100gLanSR10 - Connected to a 100G SR10.
ethernet12x10gLan - Connected to a 12x10G device.
frontplane12x10g - Connected to a 12x10G PT-Fabric I/O Un…
IfMcExpectedTyper/w
Type Values:
1ethernet100gLanSR10
2ethernet12x10gLan
3frontplane12x10g
4frontplane100g
5filter10x10g
6notApplicable
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.4
ifMcPortIdx
Internal object reference
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.5
ifMcPortSubrack
The subrack of the physical port that this interface is bound to.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.6
ifMcPortSlot
The slot of the physical port that this interface is bound to.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.7
ifMcPortIfNo
The physical interface number.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.8
ifMcPortLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.9
ifMcPortAdminStatus
The administrative state for the interface.

down - The interface is de-activated.

service - The interface is activated but alarms are
suppressed. Intended for use during service or
re-confi…
LUM-TCBoardOrInterfaceAdminStatusr/w
Type Values:
1down
2service
3up
Description:
The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.10
ifMcPortOperStatus
The operational state for the interface.

notPresent - The physical resources are not
available.

service - The alarms are suppressed.

up - The interface is operational.
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.11
ifMcPortTrxClass
String that describes the transceiver class.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.12
ifMcPortReceivedPowerLow
Received power level low threshold exceeded.
Applicable for all signal formats.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dB above th…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.13
ifMcPortMpoCableType
Type of MPO cable used.
IfMcMpoCableTyper/w
Type Values:
1straight
2completeFanout
3fanout2x5
4notApplicable
 .1.3.6.1.4.1.8708.2.64.2.2.1.1.14