LUM-FC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
22

fcIfTable

table
.1.3.6.1.4.1.8708.2.22.2.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk fcIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-FC-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-FC-MIB::fcIfTable' 
The interface list.
fcIfEntry row .1.3.6.1.4.1.8708.2.22.2.2.1.1
An entry in the interface list.
Indexes
Column Syntax OID
fcIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.1
fcIfName
The management name of the interface, for example
'fc:1:2:1', where the first number indicates
sub-rack, the second slot number and the third
is the port number. Examples:

fc:s:s:p - Fiber channel client …
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.2
fcIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.3
fcIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.4
fcIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.5
fcIfTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.6
fcIfRxPort
The number of the port where the RX-side of the
interface is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.7
fcIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.8
fcIfFormat
The expected signal format.
FcSignalFormat
Type Values:
0undefined
1fc1Gb
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.9
fcIfHighSpeed
The expected signal bit rate in units of
1,000,000 bits (Mb) per second.
Unsigned32
Constraints:
range: 1000-2000
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.10
fcIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Type Values:
1down
2service
3up
Description:
The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.11
fcIfOperStatus
The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-s…
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.12
fcIfLaserStatus
The operational state of the laser.

off - The laser is turned off.

on - The laser is turned on.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.13
fcIfTxSignalStatus
The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.14
fcIfLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.15
fcIfLossOfSync
Loss of sync.

A: FC 'frame' can not be located.

D: FC 'frame' is located.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.16
fcIfAuAlarmIndicationSignalW2C
Alarm Indication Signal in the direction WDM
to Client.

A(ctivation): AIS detected in the WDM signal
for this channel.

D(e-activation): No AIS detected for this
channel.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.17
fcIfForwardAls
Forward Automatic Laser Shut-down. Decides the
behaviour of the client laser (W2C) when the
trunc signal is defected.

disabled - The laser is NOT turned off at failure.

enabled - The laser …
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.18
fcIfSuppressRemoteAlarms
Suppress AIS in the alarm list. The fault status
on the port object can, however, be seen.

disabled - alarms are not suppressed.

enabled - alarms are suppressed.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.19
fcIfFarEndLoopback
Loop the client TX signal back to the client RX.

disabled - the signal is not looped

enabled - the signal is looped.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.20
fcIfEntityId
Index in entity table.

-- Only used for notifications
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.21
fcIfObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.22.2.2.1.1.22