The MIB module used to specify Liebert Controller OIDs Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. |
lgpAgentConnectedDeviceCount, lgpAgentDeviceIndex | LIEBERT-GP-AGENT-MIB |
lgpSystem, liebertSystemModuleReg | LIEBERT-GP-REGISTRATION-MIB |
sysUpTime | RFC1213-MIB |
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, Integer32, Unsigned32 | SNMPv2-SMI |
DisplayString | SNMPv2-TC |
![]() | .1.3.6.1.4.1.476.1.42.1.8.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.1.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.2 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.2.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.2.2 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.3 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.3.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.4 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.4.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.4.2 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.5 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.5.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.6 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.6.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.6.2 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.6.3 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.7 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.8 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1.1.1 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1.1.2 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1.1.3 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.1.1.4 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.5 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.5.5 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.5.6 | |
![]() | .1.3.6.1.4.1.476.1.42.3.7.9.5.7 |
Name | OID | Description |
---|---|---|
.1.3.6.1.4.1.476.1.42.3.7.8.1 | ication is a generic notification intended for direct user visibility. The user event description identifies the system condition that has occurred. This text will be prefixed with either 'Active:', 'Cleared:', or 'Message:' depending on the state of the event. Note: That a prefix of 'Message:' identifies a stateless event and as such there will be no corresponding 'Cleared:' trap sent. | |
.1.3.6.1.4.1.476.1.42.3.7.8.2 | has returned to a normal operating state. This implies prior to the generation of this event the system was operating in a state where one or more alarm or warning conditions were present. All of those alarms or conditions have now cleared. NOTE: This notification may be generated after a short delay during a cold boot of the system -- if no alarms or conditions are present in the monitored device(s) at that time. |