LIEBERT-GP-NOTIFICATIONS-MIB
The MIB module used to register Liebert SNMP OIDs.
Copyright 2000-2008 Liebert Corporation. All rights reserved.
Reproduction of this document is authorized on the condition
that the forgoing copyright notice is included.
This Specification is supplied 'AS IS' and Liebert Corporation
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
- Source file
LIEBERT-GP-NOTIFICATIONS-MIB- Last revised
- Identity
liebertGlobalProductsNotificationsModule- Base OID
1.3.6.1.4.1.476.1.42.1.4.1
Imported Objects
| LIEBERT-GP-CONDITIONS-MIB | lgpConditionDescr lgpConditionId lgpConditionTableRef lgpConditionTableRowRef lgpConditionTime |
| LIEBERT-GP-REGISTRATION-MIB | lgpNotifications liebertNotificationsModuleReg |
| RFC1213-MIB | sysUpTime |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the liebert MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LIEBERT-GP-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LIEBERT-GP-NOTIFICATIONS-MIB::liebertGlobalProductsNotificationsModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-NOTIFICATIONS-MIB::liebertGlobalProductsNotificationsModule'
Objects (5)
Showing 5 of 5 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.476.1.42.1.4.1 |
||
.1.3.6.1.4.1.476.1.42.3.3.0 |
||
.1.3.6.1.4.1.476.1.42.3.3.10 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.476.1.42.3.3.10.5 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.476.1.42.3.3.10.6 |
Dependencies (8) 4 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- LIEBERT-GP-REGISTRATION-MIBliebert
- SNMPv2-TCrfc
- LIEBERT-GP-CONDITIONS-MIBliebert
- IANAifType-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- LIEBERT-GP-NOTIFICATIONS-MIBliebertselected
Notifications / Traps (24)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.476.1.42.3.3.0.1 |
This notification is sent each time a condition is inserted into the
conditions table. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.10 |
Device power module failure.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.11 |
Device battery module failure.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.12 |
Device control module failure.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.13 |
Device power module warning.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.14 |
Device battery module warning.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.15 |
Device control module warning.
|
|
|
lgpEventAgentFirmwareUpdateSuccessful
deprecated
|
.1.3.6.1.4.1.476.1.42.3.3.0.16 |
The firmware update to the agent card has completed successfully.
This element has been relocated to lgpAgentFirmwareUpdateSuccessful in the LIEBERT-GP-AGENT-MIB document. |
|
lgpEventAgentFirmwareCorrupt
deprecated
|
.1.3.6.1.4.1.476.1.42.3.3.0.17 |
The firmware update to the agent card has failed and the firmware is
now corrupt. This element has been relocated to lgpAgentFirmwareCorrupt in the LIEBERT-GP-AGENT-MIB document. |
.1.3.6.1.4.1.476.1.42.3.3.0.18 |
Configuration for the referenced PDU has been modified.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.19 |
A hot-swappable module has been added to the object specified by the
lgpEventParmTableRef and lgpEventParmTableRowRef. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.2 |
This notification is sent each time a condition is removed from the
conditions table. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.20 |
A hot-swappable module has been removed from the object specified by
the lgpEventParmTableRef and lgpEventParmTableRowRef. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.21 |
Receptacle's power state has been changed from OFF to ON.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.22 |
Receptacle's power state has been changed from ON to OFF.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.23 |
The receptacle's load started drawing power. This notification
is asserted when the receptacle power is ON and the associated load was previously not drawing power but is now drawing power. This event is not asserted as a result of turning the receptacle power ON. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.24 |
The receptacle's load stopped drawing power. This notification
is asserted when the receptacle power is ON and the associated load was previously drawing power but is now no longer drawing power. This event is not asserted as a result of turning the receptacle power OFF. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.3 |
The battery's remaining charge is less than or equal to the agent's
configured low threshold 'lgpPwrConfigLowBatteryWarningTime'. |
|
.1.3.6.1.4.1.476.1.42.3.3.0.4 |
The device has transferred the load to the bypass source.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.5 |
The device has reported an internal fault.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.6 |
The device has reported a battery self-test failure.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.7 |
The device has reported an output overload condition.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.8 |
The device has transitioned to the user defined redundant state.
|
|
.1.3.6.1.4.1.476.1.42.3.3.0.9 |
The device as transitioned to a non-redundant power state as defined
by the user configured threshold. |