LENOVO-GbTOR-G8332-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
382
Rows
382
Columns
3,507
.1.3.6.1.4.1.20301.2.7.16.1.1.1.184 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agCurCfgTrapHostTable'
The table of current trap hosts configure.
agCurCfgTrapHostEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.1.184.1
A trap host configuration on the switch.
Column Syntax OID
agCurCfgTrapHostIndexThe trap host index. Valid range is 1-16SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.1.184.1.1
agCurCfgTrapHostAddressThe trap host address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.1.184.1.2
agCurCfgTrapHostCommStrThe trap host community string.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.1.1.1.184.1.3
.1.3.6.1.4.1.20301.2.7.16.1.1.1.185 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agNewCfgTrapHostTable'
The table for trap host definitions in the new configuration block.
agNewCfgTrapHostEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.1.185.1
A row in the trap host definition table
Column Syntax OID
agNewCfgTrapHostIndexThe trap host index. Valid range is 1-16SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.1.185.1.1
agNewCfgTrapHostAddressThe trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.1.185.1.2
agNewCfgTrapHostCommStrThe trap host community string in the new configuration block.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.1.1.1.185.1.3
agNewCfgTrapHostDeleteBy setting the value to delete(2), the entire row is deleted.Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.1.1.1.185.1.4
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2 · 1 row entry · 42 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agPortCurCfgTable'
The table of port configuration in the current configuration block.
agPortCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1
A row in the port table in the current configuration block.
Column Syntax OID
agPortCurCfgIndxThe index of the row in port configurations table.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.1
agPortCurCfgStateThis is the state of the port.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.2
agPortCurCfgVlanTagThis is VLAN tag state of the portEnumeration
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.3
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.Enumeration
Enumerated Values:
2on
3off
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.5
agPortCurCfgPVIDThe default VLAN ID for the port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.6
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.11
agPortCurCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.12
agPortCurCfgPortNameThe switch port name.OctetString
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.13
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.16
agPortCurCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.Enumeration
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
6mbs10000
7mbs40000
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.21
agPortCurCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4any
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.22
agPortCurCfgDscpRemarkingEnable or disable Dscp remarking for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.23
agPortCurCfgPortAliasThe switch port alias.OctetString
Constraints:
range: 0-15
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.24
agPortCurCfgTagPVIDThis is PVID tag state of the portEnumeration
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.25
agPortCurCfgLearningEnable or disable L2 (FDB) Learning for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.26
agPortCurCfgFloodBlockingEnable or disable flood blocking for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.27
agPortCurCfgTypeThe switch port type.OctetString
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.29
agPortCurCfgLinkTypeThe type of port connection. (for PVRST only)Enumeration
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.30
agPortCurCfgEdgeThe state of port edge.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.31
agPortCurCfgTagiSkipEnable/disable skipping ingress VLAN tag enforcement.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.32
agPortCurCfgTageSkipEnable/disable skipping egress VLAN tag enforcement.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.33
agPortCurCfgErrDisableRecoveryThis object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has el…
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.35
agPortCurCfgUdldEnable or disable UDLD for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.37
agPortCurCfgUdldModeEnable or disable UDLD mode for the switch port.Enumeration
Enumerated Values:
1normal
2aggressive
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.38
agPortCurCfgOamEnable or disable OAM Discovery process for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.39
agPortCurCfgOamModeEnable or disable OAM mode for the switch port.Enumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.40
agPortCurCfgBpduGuardEnable or disable BPDU guard for the switch port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.41
agPortCurCfgMulticastThresholdCurrent status of the port's Multicast Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.42
agPortCurCfgMulticastThresholdRateCurrent port's Multicast Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.43
agPortCurCfgBroadcastThresholdCurrent status of the port's Broadcast Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.44
agPortCurCfgBroadcastThresholdRateCurrent port's Broadcast Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.45
agPortCurCfgDLFThresholdCurrent status of the port's Destination Lookup Fail Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.46
agPortCurCfgDLFThresholdRateCurrent port's Destination Lookup Fail Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.47
agPortCurCfgMacAddrNotifThis is the state of the MAC address notification
syslog messages on the port.
Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.48
agPortCurCfgTagiPVIDThis is ingress PVID tag state of the portEnumeration
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.49
agPortCurCfgStpExtGuardCurrent state for spanning tree guard typeEnumeration
Enumerated Values:
0default
1loop
2root
3none
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.52
agPortCurCfgLFDStatusThis object indicates whether the system will put this port
in an error-disabled state due to excessive link flaps.

A port will be put in an error-disabled state due to
excessive link flaps if this objec…
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.53
agPortCurCfgEvbProfIdCurrent EVB Profile IDInteger32
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.56
agPortCurCfgReflectRelayCurrent state of reflective relayEnumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.59
agPortCurCfgPrivateVlanStatusCurrent state of Private VLAN on this portEnumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.61
agPortCurCfgMappedPrimaryVlansPrimary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…
OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.62
agPortCurCfgAssociatedSecondaryVlansSecondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.2.2.1.63
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3 · 1 row entry · 46 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agPortNewCfgTable'
The table of port configuration in the new configuration block.
agPortNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1
A row in the port configuration table in the new configuration block.
Column Syntax OID
agPortNewCfgIndxThe index of the row in port configurations table.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.1
agPortNewCfgStateThis is the state of the port.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.2
agPortNewCfgVlanTagThis is VLAN tag state of the portEnumerationr/w
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.3
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.Enumerationr/w
Enumerated Values:
2on
3off
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.5
agPortNewCfgPVIDThe default VLAN ID for the port.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.6
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.11
agPortNewCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.12
agPortNewCfgPortNameThe switch port name.OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.13
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.16
agPortNewCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
6mbs10000
7mbs40000
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.21
agPortNewCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4any
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.22
agPortNewCfgDscpRemarkingEnable or disable Dscp remarking for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.23
agPortNewCfgTagPVIDThis is PVID tag state of the portEnumerationr/w
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.25
agPortNewCfgLearningEnable or disable L2 (FDB) Learning for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.26
agPortNewCfgFloodBlockingEnable or disable flood blocking for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.27
agPortNewCfgTypeThe switch port type.OctetString
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.29
agPortNewCfgLinkTypeThe type of port connection. (for PVRST only)Enumerationr/w
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.30
agPortNewCfgEdgeThe state of port edge.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.31
agPortNewCfgTagiSkipEnable/disable skipping ingress VLAN tag enforcement.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.32
agPortNewCfgTageSkipEnable/disable skipping egress VLAN tag enforcement.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.33
agPortNewCfgErrDisableRecoveryThis object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.35
agPortNewCfgUdldEnable or disable UDLD for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.37
agPortNewCfgUdldModeEnable or disable UDLD mode for the switch port.Enumerationr/w
Enumerated Values:
1normal
2aggressive
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.38
agPortNewCfgOamEnable or disable OAM Discovery process for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.39
agPortNewCfgOamModeEnable or disable OAM mode for the switch port.Enumerationr/w
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.40
agPortNewCfgBpduGuardEnable or disable BPDU guard for the switch port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.41
agPortNewCfgMulticastThresholdNew status of the port's Multicast Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.42
agPortNewCfgMulticastThresholdRateNew port's Multicast Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.43
agPortNewCfgBroadcastThresholdNew status of the port's Broadcast Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.44
agPortNewCfgBroadcastThresholdRateNew port's Broadcast Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.45
agPortNewCfgDLFThresholdNew status of the port's Destination Lookup Fail Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.46
agPortNewCfgDLFThresholdRateNew port's Destination Lookup Fail Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.47
agPortNewCfgMacAddrNotifEnables or Disables the MAC address notification
syslog messages on the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.48
agPortNewCfgTagiPVIDThis is ingress PVID tag state of the portEnumerationr/w
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.49
agPortNewCfgStpExtGuardSet spanning tree guard typeEnumerationr/w
Enumerated Values:
0default
1loop
2root
3none
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.52
agPortNewCfgLFDStatusThis object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
Dampening error-disable action.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.53
agPortNewCfgEvbProfIdSet EVB Profile IDInteger32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.56
agPortNewCfgReflectRelayEnable/disable reflective relay for portEnumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.59
agPortNewCfgPrivateVlanStatusEnable or disable the Private VLAN on this portEnumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.61
agPortNewCfgMappedPrimaryVlansPrimary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…
OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.62
agPortNewCfgAddPrimaryVlanAdds the port to the specified primary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.63
agPortNewCfgDelPrimaryVlanRemoves the port from the specified primary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.64
agPortNewCfgAssociatedSecondaryVlansSecondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.65
agPortNewCfgAddSecondaryVlanAdds the port to the specified secondary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.66
agPortNewCfgDelSecondaryVlanRemoves the port from the secondary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.67
agPortNewCfgPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.2.3.1.68
.1.3.6.1.4.1.20301.2.7.16.1.1.5.11 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agSyslogMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agSyslogMsgTable'
The table of syslog messages.
agSyslogMsgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.5.11.1
A syslog message stored on the switch.
Column Syntax OID
agSyslogMsgIndexThe syslog message table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.5.11.1.1
agSyslogMessageThe syslog message.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.1.1.5.11.1.2

agApplyTable

table
.1.3.6.1.4.1.20301.2.7.16.1.1.8.5 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agApplyTable'
The table of failure reasons for an apply of current
configuration block changes.
agApplyTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.8.5.1
A row in the table of failure reasons for an apply
(information about a particular reason of failure).
Indexes
Column Syntax OID
agApplyIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.8.5.1.1
agApplyStringA string in the apply table.OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.8.5.1.2
.1.3.6.1.4.1.20301.2.7.16.1.1.11.39 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agTacacsUserMapCurCfgTable'
The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.11.39.1
A row in the tacacs+ user mapping table.
Column Syntax OID
agTacacsUserMapCurCfgUIdThe current config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.11.39.1.1
agTacacsUserMapCurCfgMappingCurrent Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumeration
Enumerated Values:
0none
1user
2oper
3admin
.1.3.6.1.4.1.20301.2.7.16.1.1.11.39.1.2
.1.3.6.1.4.1.20301.2.7.16.1.1.11.40 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agTacacsUserMapNewCfgTable'
The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.11.40.1
A row in the tacacs+ user mapping table.
Column Syntax OID
agTacacsUserMapNewCfgUIdThe new config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.11.40.1.1
agTacacsUserMapNewCfgMappingSet new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumerationr/w
Enumerated Values:
0none
1user
2oper
3admin
.1.3.6.1.4.1.20301.2.7.16.1.1.11.40.1.2
.1.3.6.1.4.1.20301.2.7.16.1.1.12.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agCurCfgMgmtNetTable'
The table for Management Network definitions
in the current configuration block.
agCurCfgMgmtNetEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.12.2.1
A row in the management network definition table.
Column Syntax OID
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.12.2.1.1
agCurCfgMgmtNetSubnetThe Management Network Address in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.12.2.1.2
agCurCfgMgmtNetMaskThe Management Network Mask/Prefix Length in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.12.2.1.3
.1.3.6.1.4.1.20301.2.7.16.1.1.12.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agNewCfgMgmtNetTable'
The table for Management Network definitions
in the new configuration block.
agNewCfgMgmtNetEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.12.3.1
A row in the management network definition table.
Column Syntax OID
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.12.3.1.1
agNewCfgMgmtNetSubnetThe Management Network Address in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.12.3.1.2
agNewCfgMgmtNetMaskThe Management Network Mask/Prefix length in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.12.3.1.3
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.1.1.12.3.1.4
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agAccessUserCurCfgTable'
The table of Access user configuration.
agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1
A row in the Access user configuration table.
Column Syntax OID
agAccessUserCurCfgUIdThe User identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1.1
agAccessUserCurCosThe user class of service.Enumeration
Enumerated Values:
0user
3oper
6admin
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1.2
agAccessUserCurCfgNameThe user name. Please note, the max length is 8 in stacking mode.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1.3
agAccessUserCurCfgPswdThe character string representing the user password.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1.4
agAccessUserCurCfgStateUser validation (enabled or disabled) in current
configuration block.
Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.19.2.1.6
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agAccessUserNewCfgTable'
The table of Access user configuration.
agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1
A row in the Access user configuration table.
Column Syntax OID
agAccessUserNewCfgUIdThe User identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.1
agAccessUserNewCosThe user class of service.Enumerationr/w
Enumerated Values:
0user
3oper
6admin
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.2
agAccessUserNewCfgNameThe user name. Please note, the max length is 8 in stacking mode.OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.3
agAccessUserNewCfgPswdThe character string representing the user password.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.4
agAccessUserNewCfgStateUser validation (enabled or disabled) in new
configuration block.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.7
agAccessUserNewCfgDeleteThis is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.1.1.19.3.1.8
.1.3.6.1.4.1.20301.2.7.16.1.1.21.46 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostCurConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ldapHostCurConfigTable'
The table for user specified host.
ldapHostCurConfigTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.21.46.1
A row in the user specified host table.
Column Syntax OID
ldapHostCurConfigIndexThe index of the user specified host table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.21.46.1.1
ldapHostCurAddrSpecify the group addr.OctetString
Constraints:
range: 0-127
.1.3.6.1.4.1.20301.2.7.16.1.1.21.46.1.2
ldapHostCurPortSpecify the group port.Integer32
Constraints:
range: 1-65000
.1.3.6.1.4.1.20301.2.7.16.1.1.21.46.1.3
ldapHostCurPortTypeSpecify the host port type.
data-port: Data port
mgt-port: Management port
Enumeration
Enumerated Values:
0data-port
1mgt-port
.1.3.6.1.4.1.20301.2.7.16.1.1.21.46.1.4
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostNewConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ldapHostNewConfigTable'
The table for user specified host.
ldapHostNewConfigTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1
A row in the user specified host table.
Column Syntax OID
ldapHostNewConfigIndexThe index of the user specified host table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1.1
ldapHostNewAddrSpecify the group addr.OctetStringr/w
Constraints:
range: 0-127
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1.2
ldapHostNewPortSpecify the host port.Integer32r/w
Constraints:
range: 1-65000
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1.3
ldapHostNewPortTypeSpecify the host port type.
data-port: Data port
mgt-port: Management port
Enumerationr/w
Enumerated Values:
0data-port
1mgt-port
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1.4
ldapHostNewCfgDeleteThis is an action object to create or delete a host.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a host
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.1.1.21.47.1.5
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sshPubKeyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::sshPubKeyConfigTable'
The table for ssh public keys and its users.
sshPubKeyConfigEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1
A row in the ssh public keys tables.
Column Syntax OID
sshPubKeyConfigIndexThe index of the ssh public key entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.1
sshPubKeyTypeSpecify the type of the public key.Enumeration
Enumerated Values:
1rsa
2dsa
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.2
sshPubKeyHashValueThe hash value of a specific public key.OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.3
sshPubkeyUserBmapThe user list in the key entry. The user are presented in bitmap format.
as follows:

OCTET 1 OCTET 2 OCTET 3 OCTET 4
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|| | | |||| ||__…
OctetString.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.4
sshPubKeyAddUserAdd a new user to a particular public key.
Reminder: The user must be a valid system user.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.5
sshPubKeyDelUserRemove a user from the user list of the public key entry.OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.6
sshPubKeyRemEntryRemove a public key entry.Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.1.1.22.15.1.7
.1.3.6.1.4.1.20301.2.7.16.1.1.24.7 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::sflowCurPortCfgTable'
The table of sFlow port configuration.
sflowCurPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.24.7.1
A row in the sFlow port configuration table.
Column Syntax OID
sflowCurPortCfgTableIdsFlow port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.1.24.7.1.1
sflowCurPortSamplingThe current sFlow port sampling rate.Integer32
Constraints:
range: 256-65536
.1.3.6.1.4.1.20301.2.7.16.1.1.24.7.1.2
sflowCurPortPollingThe current sFlow port polling interval.Integer32
Constraints:
range: 5-60
.1.3.6.1.4.1.20301.2.7.16.1.1.24.7.1.3
sflowCurPortCfgPortAliasThe current sFlow port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.24.7.1.4
.1.3.6.1.4.1.20301.2.7.16.1.1.24.8 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::sflowNewPortCfgTable'
The table of sFlow port configuration.
sflowNewPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.24.8.1
A row in the sFlow port configuration table.
Column Syntax OID
sflowNewPortCfgTableIdsFlow port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.1.24.8.1.1
sflowNewPortSamplingThe new sFlow port sampling rate.
Valid range: 256-65536| 0 for disable
Integer32r/w
Constraints:
range: 256-65536
.1.3.6.1.4.1.20301.2.7.16.1.1.24.8.1.2
sflowNewPortPollingThe new sFlow port polling interval.
Valid range: 5-60| 0 for disable
Integer32r/w
Constraints:
range: 5-60
.1.3.6.1.4.1.20301.2.7.16.1.1.24.8.1.3
sflowNewPortCfgPortAliasThe new sFlow port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.24.8.1.4
.1.3.6.1.4.1.20301.2.7.16.1.1.26.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agQsfp40GCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agQsfp40GCfgTable'
The QSFP 40G ports configuration table
qsfp40GPortEntry row .1.3.6.1.4.1.20301.2.7.16.1.1.26.1.1
A row in the QSFP 40G configuration table
Indexes
Column Syntax OID
qsfpPortNumberThe port numberSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.1.26.1.1.1
qsfpPortBootedModeThe booted port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.
Enumeration
Enumerated Values:
1mode10G
2mode40G
.1.3.6.1.4.1.20301.2.7.16.1.1.26.1.1.2
qsfpPortSavedModeThe saved port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.
Enumerationr/w
Enumerated Values:
1mode10G
2mode40G
.1.3.6.1.4.1.20301.2.7.16.1.1.26.1.1.3
qsfpPortAliasThe port aliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.1.26.1.1.4
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::cpuUtilProcessStatsTable'
The table of CPU utilization per process statistics. It is deprecated.
cpuUtilProcessStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1
A row in the CPU utilization stats per process table. It is deprecated.
Indexes
Column Syntax OID
processIdThe process ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.1
processNameProcess Name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.2
cpuProcessUtil1SecThe utilization of MP CPU over 1 second.
It shows the percentage.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.3
cpuProcessUtil5SecThe utilization of MP CPU over 5 seconds.
It shows the percentage.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.4
cpuProcessUtil1MinThe utilization of MP CPU over 1 min.
It shows the percentage.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.5
cpuProcessUtil5MinThe utilization of MP CPU over 5 min.
It shows the percentage.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.6
processStatusProcess StatusOctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.5.1.7
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsRevTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::cpuUtilProcessStatsRevTable'
The table of CPU utilization per process statistics.
cpuUtilProcessStatsRevTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1
A row in the CPU utilization stats per process table.
Indexes
Column Syntax OID
processIdRevThe process ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.1
processNameRevProcess Name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.2
cpuProcessUtil1SecRevThe utilization of MP CPU over 1 second.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.3
cpuProcessUtil5SecRevThe utilization of MP CPU over 5 seconds.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.4
cpuProcessUtil1MinRevThe utilization of MP CPU over 1 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.5
cpuProcessUtil5MinRevThe utilization of MP CPU over 5 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.6
processStatusRevProcess StatusOctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.2.2.11.1.7
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1 · 1 row entry · 40 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::portStatsTable'
The table of port statistics.
portStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1
A row in the port stats table.
Indexes
Column Syntax OID
portStatsIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.1
portStatsPhyIfInOctetsThe total number of octets received on the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.2
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.3
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.4
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.5
portStatsPhyIfInErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.6
portStatsPhyIfInUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.7
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.8
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.9
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.10
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.11
portStatsPhyIfOutErrorsThe number of outbound packets that could not be
transmitted because of errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.12
portStatsPhyIfOutQLenThe length of the output packet queue (in
packets).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.13
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.15
portStatsClearSetting this value to clear(2) clears the stats for this port.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.16
portStatsPhyIfInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.17
portStatsPhyIfOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.18
portStatsLinkStateChangeNumber of link state changes.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.20
portStatsPhyIfInFctlPktsThe number of inbound flow control packets.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.21
portStatsPhyIfOutFctlPktsThe number of outbound flow control packets.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.22
portStatsPhyIfInFctlPktsRateThe number of inbound flow control packets per second.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.23
portStatsPhyIfOutFctlPktsRateThe number of outbound flow control packets per second.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.24
portStatsPhyIfIngDiscdVlanThe number of packets, discarded because of VLAN.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.25
portStatsPhyIfIngDiscdEgrMapThe number of packets, discarded because of empty egress portmap.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.26
portStatsPhyIfIngDiscdFilterThe number of packets, discarded because of filter.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.27
portStatsPhyIfIngDiscdPolicyThe number of packets, discarded because of policy.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.28
portStatsPhyIfIngDiscdNonFwdStatThe number of packets, discarded because of Non-Forwarding State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.29
portStatsPhyIfIngDiscdIbpCbpThe number of packets discarded because of IBP/CBP.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.30
portStatsDot1PortInFramesThe number of IN frames per port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.31
portStatsDot1PortOutFramesThe number of OUT frames per port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.32
portStatsDot1PortInDiscardsThe number of IN packets discarded per port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.33
portStatsDot1TpLearnedEntryDiscardsThe number of Dot1Tp learned entries discarded.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.34
portStatsDot1StpPortForwardTransitionsThe number of transitions ....SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.35
portStatsPhyIfEgrHOLBlockDiscdThe number of packets, discarded because of HOL Blocking.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.36
portStatsPhyIfEgrMMUDiscdThe number of packets, discarded by MMU because of zero port bitmap.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.37
portStatsPhyIfEgrCellErrDiscdThe number of packets, discarded because of Cell Errors or purging.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.38
portStatsPhyIfEgrMMUAgeDiscdThe number of packets, discarded because of MMU Aging. Applicable in
10/100 mode, incremented for frames aborted which were deferred for an
excessive period of time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.39
portStatsPhyIfEgrOtherDiscdThe number of packets, discarded because of Other reasons.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.40
portStatsPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.1.1.41
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2 · 1 row entry · 32 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1xPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot1xPortStatsTable'
The table of 802.1x port statistics.
dot1xPortStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1
A row in the 802.1x port stats table.
Column Syntax OID
dot1xPortStatsIndxThe 802.1x port stats index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.1
eapolFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.2
eapolFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.3
eapolStartFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.4
eapolLogoffFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.5
eapolRespIdFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.6
eapolRespFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.7
eapolReqIdFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.8
eapolReqFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.9
invalidEapolFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.10
eapLengthErrorFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.11
authEntersConnectingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.12
authEapLogoffsWhileConnectingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.13
authEntersAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.14
authSuccessesWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.15
authTimeoutsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.16
authFailWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.17
authReauthsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.18
authEapStartsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.19
authEapLogoffWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.20
authReauthsWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.21
authEapStartsWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.22
authEapLogoffWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.23
backendResponsesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.24
backendAccessChallengesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.25
backendOtherRequestsToSupplicantSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.26
backendNonNakResponsesFromSupplicantSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.27
backendAuthSuccessesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.28
backendAuthFailsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.29
lastEapolFrameVersionSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.30
lastEapolFrameSourceSNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.31
dot1xPortStatsPortAliasThe 802.1x port stats alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.2.1.32
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3 · 1 row entry · 16 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portMgmtStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::portMgmtStatsTable'
The table of port statistics.
portMgmtStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1
A row in the management port stats table.
Column Syntax OID
portMgmtStatsIndxThe management port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.1
portMgmtStatsRxBytesThe total number of bytes received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.2
portMgmtStatsTxBytesThe total number of bytes transmitted.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.3
portMgmtStatsRxpacketsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.4
portMgmtStatsTxpacketsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.5
portMgmtStatsRxErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.6
portMgmtStatsTxErrorsThe number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.7
portMgmtStatsRxDroppedThe number of inbound packets that were dropped.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.8
portMgmtStatsTxDroppedThe number of outbound packets that were dropped.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.9
portMgmtStatsRxOverrunsThe number of data overruns over this link.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.10
portMgmtStatsTxOverrunsThe number of data overruns over this link.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.11
portMgmtStatsRxFrameThe number of frames received on this link.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.12
portMgmtStatsTxCarrierThe number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.13
portMgmtStatsRxMulticastThe total number of multicast packets received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.14
portMgmtStatsTxCollisionsThe number of collisions on this outbound segment.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.15
portMgmtStatsPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.3.1.16
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4 · 1 row entry · 42 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk allportsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::allportsStatsTable'
The table of all ports statistics.
allportsStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1
A row in the table of all ports statistics.
Column Syntax OID
allportsStatsIndxThe port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.1
allportsStatsDescrThe port description.OctetString
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.2
allportsStatsSpeedThe current operational speed of the port.Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
7mbs40000
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.3
allportsStatsPhysAddressThe port MAC Address.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.4
allportsStatsAdminStatusThe port Admin state.Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.5
allportsStatsOperStatusThe port Operational Status.Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.6
allportsStatsInOctetsOctets In for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.7
allportsStatsOutOctetsOctets Out for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.8
allportsStatsInPktsPackets In for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.9
allportsStatsOutPktsPackets Out for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.10
allportsStatsInUcastUnicast Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.11
allportsStatsOutUcastUnicast Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.12
allportsStatsInBcastBroadcasts Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.13
allportsStatsOutBcastBroadcasts Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.14
allportsStatsInMcastMulticast Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.15
allportsStatsOutMcastMulticast Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.16
allportsStatsInDiscardsDiscarded Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.17
allportsStatsOutDiscardsOutbound Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.18
allportsStatsInErrorsError Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.19
allportsStatsOutErrorsNot sent packets due to error.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.20
allportsStatsInUnknownProtosUnknown protocol packets.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.21
allportsStatsOutQLenOutbound Packet Queue Length.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.22
allportsStatsipInReceivesIp In Receives.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.23
allportsStatsipInHeaderErrorsIp In Header Errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.24
allportsStatsipInDiscardsIp In Discards.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.25
allportsStatsLinkStateChangeNumber of link state changes.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.26
allportsStatsipInReceivesRateIp In Receives rate.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.27
allportsStatsipInHeaderErrorsRateIp In Header Errors rate.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.28
allportsStatsipInDiscardsRateIp In Discards rate.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.29
allportsStatsInOctetsRateOctets In rate for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.30
allportsStatsOutOctetsRateOctets Out rate for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.31
allportsStatsInUcastRateUnicast Packets In rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.32
allportsStatsOutUcastRateUnicast Packets Out rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.33
allportsStatsInBcastRateBroadcasts Packets In rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.34
allportsStatsOutBcastRateBroadcasts Packets Out rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.35
allportsStatsInMcastRateMulticast Packets In rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.36
allportsStatsOutMcastRateMulticast Packets Out rate for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.37
allportsStatsInDiscardsRateDiscarded In Packets rate for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.38
allportsStatsOutDiscardsRateDiscarded Out Packets rate for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.39
allportsStatsInErrorsRateErroneus inbound packets rate for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.40
allportsStatsOutErrorsRateNot sent packets due to error rate.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.41
allportsStatsPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.4.1.42
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot1RateStatsTable'
The table of bridging statistics per second.
dot1RateStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1
Bridging statistics per second.
Column Syntax OID
dot1RateStatsIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.1
dot1RatePortInFramesThe number of frames that have been received
per second by this port from its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.2
dot1RatePortOutFramesThe number of frames that have been transmitted
per second by this port to its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.3
dot1RatePortInDiscardsCount of valid frames received which were
discarded per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.4
dot1RateTpLearnedEntryDiscardsThe number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.5
dot1RateStpPortForwardTransitionsThe number of times this port has transitioned
per second from the Learning state to the
Forwarding state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.8
dot1RatePortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.7.1.9
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot3RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot3RateStatsTable'
The table of Ethernet statistics per second.
dot3RateStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1
Ethernet statistics per second.
Column Syntax OID
dot3RateStatsIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.1
dot3RateStatsAlignmentErrorsA count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.2
dot3RateStatsFCSErrorsA count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.3
dot3RateStatsSingleCollisionFramesA count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.4
dot3RateStatsMultipleCollisionFramesA count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.5
dot3RateStatsLateCollisionsThe number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.8
dot3RateStatsExcessiveCollisionsA count per second of frames for which
transmission on a particular interface fails
due to excessive collisions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.9
dot3RateStatsInternalMacTransmitErrorsA count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.10
dot3RateStatsFrameTooLongsA count per second of frames received on a particular
interface that exceed the maximum permitted frame size.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.12
dot3RateStatsInternalMacReceiveErrorsA count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.13
dot3RatePortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.8.1.14
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portQoSCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::portQoSCounterTable'
The table for QoS counters.
portQoSCounterTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1
A row in the port QoS table.
Column Syntax OID
portQoSIndexThe index of the portPortNumber.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.1
queueQoSIndexThe index of the queue per port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.2
txPacketsThe total Tx packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.3
droppedPacketsThe dropped packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.4
txBytesThe total Tx bytes.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.5
droppedBytesThe dropped bytes.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.6
txPacketsRateThe Tx packets rate.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.7
droppedPacketsRateThe dropped packets rate.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.8
txBytesRateThe Tx bytes rate.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.9
droppedBytesRateThe dropped bytes rate.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.10
portAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.3.9.1.11
.1.3.6.1.4.1.20301.2.7.16.1.2.11.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclStatsTable'
The table of ACL statistics.
aclStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.11.1.1
Statistics about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclStatsIndexThe acl index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.11.1.1.1
aclStatsHitsTotal number of hits for this ACL entrySNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.11.1.1.2
aclClearStatsSetting this value to clear(2) clears the stats for the ACL.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.2.11.1.1.3
.1.3.6.1.4.1.20301.2.7.16.1.2.11.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapStatsTable'
The table of VMAP statistics.
vmapStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.11.2.1
Statistics about a particular VMAP configuration entry.
Indexes
Column Syntax OID
vmapStatsIndexThe vmap index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.11.2.1.1
vmapStatsHitsTotal number of hits for this VMAP entrySNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.11.2.1.2
vmapClearStatsSetting this value to clear(2) clears the stats for the VMAP.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.2.11.2.1.3
.1.3.6.1.4.1.20301.2.7.16.1.2.11.3 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::acl6StatsTable'
The table of IPv6 ACL statistics.
acl6StatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.11.3.1
Statistics about a particular IPv6 ACL configuration entry.
Indexes
Column Syntax OID
acl6StatsIndexThe ipv6 acl index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.11.3.1.1
acl6StatsHitsTotal number of hits for this IPv6 ACL entrySNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.11.3.1.2
acl6ClearStatsSetting this value to clear(2) clears the stats for the IPv6 ACL.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.2.11.3.1.3
.1.3.6.1.4.1.20301.2.7.16.1.2.11.4 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mAclStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mAclStatsTable'
The table of MACL statistics.
mAclStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.11.4.1
Statistics about a particular MACL configuration entry.
Indexes
Column Syntax OID
mAclStatsIndexThe macl index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.11.4.1.1
mAclStatsHitsTotal number of hits for this MACL entrySNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.11.4.1.2
mAclClearStatsSetting this value to clear(2) clears the stats for the MACL.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.2.11.4.1.3
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::tcpControlBlocksTable'
All TCP allocated control blocks
tcpControlBlocksTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1
A row in the TCP control blocks table.
Column Syntax OID
tcpControlBlocksIndxThe TCP blocks index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.1
destAddrThe TCP block destination address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.2
remotePortTcp informations concerning the remote portSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.3
sourceAddrIP address of the source of the Tcp blockSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.4
localPortTcp informations concerning the local portSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.5
stateThe state of the TcpSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.6
portTypeThe type of the local portSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.7
portStateThe state of the local portSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.1.1.8
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::tcpMGMTControlBlocksTable'
All TCP allocated control blocks on MGMT port
tcpMGMTTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1
A row in the TCP on MGMT port table.
Indexes
Column Syntax OID
tcpMGMTIndxIndex in the tcpMGMTControlBlocksTable table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.1
recvQThe size of the received TCP queue.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.2
sentQThe size of the sent TCP blocks queue.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.3
localAddressThe local address for the TCP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.4
foreignAddressThe remote address for the TCP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.5
stateMgmtThe port's state.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.21.2.1.6
.1.3.6.1.4.1.20301.2.7.16.1.2.22.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::udpControlBlocksTable'
All UDP control blocks in use
udpControlBlocksTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.22.1.1
A row in the UDP control blocks table.
Indexes
Column Syntax OID
udpMpLocalPortThe current UDP local port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.22.1.1.1
udpMpStateThe port's state.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.22.1.1.2
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::udpMGMTControlBlocksTable'
All UDP control blocks allocated  on MGMT port
udpMGMTTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1
A row in the UDP on MGMT port table.
Indexes
Column Syntax OID
udpMGMTIndxIndex in the udpMGMTControlBlocksTable table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.1
recvQUdpThe size of the received UDP queue.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.2
sentQUdpThe size of the sent UDP blocks queue.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.3
localAddressUdpThe local address for the UDP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.4
foreignAddressUdpThe remote address for the UDP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.5
stateMgmtUdpThe port's state.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.2.22.2.1.6
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1 · 1 row entry · 20 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::portInfoTable'
The table of port information.
portInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1
A row in the port information table.
Indexes
Column Syntax OID
portInfoIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.1
portInfoSpeedThe current operational speed of the port.Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
7mbs40000
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.2
portInfoModeThe current operational mode of the port.Enumeration
Enumerated Values:
2full-duplex
3half-duplex
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.3
portInfoFlowCtrlThe current operational flow control of the port.Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.4
portInfoLinkThe current operational link status of the port.Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
5errdisabled
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.5
portInfoPhyIfDescrA textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.6
portInfoPhyIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.7
portInfoPhyIfMtuThe size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.8
portInfoPhyIfPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet stri…
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.9
portInfoPhyIfOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.10
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.11
portInfoLearningThe port L2 (FDB) Learning state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.18
portInfoBpduGuardThe operational status of BPDU Guard on the port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.20
portInfoPvidThis is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.21
portInfoVlanTagThis is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is as…
Enumeration
Enumerated Values:
0untagged
1tagged
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.22
portInfoErrDisableRecoveryThis object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been…
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.23
portInfoErrDisableTimeLeftIf the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatical…
Integer32
Constraints:
range: 0-86400
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.24
portInfoExtGuardThe operational status of STP Loop/Root Guard on the port.Enumeration
Enumerated Values:
0no-guard
1loop
2root
3global-loop
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.25
portInfoLFDStateThis object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,
otherwise the value is 'no'.
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.26
portInfoAliasThe alias of the row in portInfo configuration table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.2.1.1.27

agDiffTable

table
.1.3.6.1.4.1.20301.2.7.16.1.3.4.4 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agDiffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agDiffTable'
The table of diff strings.
agDiffTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.4.4.1
An entry in the diff table.
Indexes
Column Syntax OID
agDiffIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.4.4.1.1
agDiffStringA string in the diff table.OctetString.1.3.6.1.4.1.20301.2.7.16.1.3.4.4.1.2
.1.3.6.1.4.1.20301.2.7.16.1.3.5.4 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCfgDumpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agCfgDumpTable'
The table of dump strings.
agCfgDumpTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.5.4.1
An entry in the dump table.
Indexes
Column Syntax OID
agCfgDumpIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.5.4.1.1
agCfgDumpStringA string in the dump table.OctetString.1.3.6.1.4.1.20301.2.7.16.1.3.5.4.1.2
.1.3.6.1.4.1.20301.2.7.16.1.3.9.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk geaportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::geaportInfoTable'
The table of gea port mapping.
geaportInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.9.1.1
An entry in the geaport table mapping.
Column Syntax OID
geaportInfoLogicalIndexThe logical port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.3.9.1.1.1
geaportInfoAliasThe GEA Port Alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.9.1.1.2
geaportInfoPortThe GEA Port (0-based).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.9.1.1.3
geaportInfoUnitThe GEA Unit.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.9.1.1.4

sfpInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::sfpInfoTable'
The table of external port SFP information.
sfpInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1
A row in the external port SFP information table.
Indexes
Column Syntax OID
sfpInfoIndxThe external port SFX index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.1
sfpInfoPortAliasExternal Port SFP/XFP alias.OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.2
sfpInfoDeviceExternal Port SFP/XFP Device.OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.3
sfpInfoTXEnableExternal Port SFP/XFP TX-Enable.Enumeration
Enumerated Values:
1notInstalled
2enabled
3disabled
5notAvailable
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.4
sfpInfoRXSignalExternal Port SFP/XFP RX-Signal.Enumeration
Enumerated Values:
1notInstalled
2down
3link
4notAvailable
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.5
sfpInfoTXFaultExternal Port SFP/XFP TX-Fault.Enumeration
Enumerated Values:
1notInstalled
2fault
3none
4notAvailable
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.6
sfpInfoApprovedExternal Port SFP/XFP Approval.Enumeration
Enumerated Values:
1notInstalled
2notApproved
3sfpApproved
5sfpAccepted
6sfpRestrict
7sfpUnsupprt
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.7
sfpInfoVendorExternal Port SFP/XFP device vendor.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.8
sfpInfoSerialExternal Port SFP/XFP device serial.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.9
sfpInfoPartNumberExternal Port SFP/XFP device part number.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.10
sfpInfoRevisionExternal Port SFP/XFP device revision.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.11
sfpInfoVoltageExternal Port SFP/XFP device voltage.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.12
sfpInfoTemperatureExternal Port SFP/XFP device temperature.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.13
sfpInfoWaveLengthExternal Port SFP/XFP device laser wave length.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.1.3.11.1.1.14
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmGroupInfoTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmGroupInfoTbl'
Virtual MAC information table
vmGroupInfolistEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1
The run-time information about a virtual machine
Indexes
Column Syntax OID
vmGroupInfoIdxTable index, 1 based.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.1
vmGroupInfoMacThe virtual machine MAC address.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.2
vmGroupInfoIPThe virtual machine IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.3
vmGroupInfoPortIdxSystem port connected to the virtual machine.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.4
vmGroupInfoGroupThe virtual machine group.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.5
vmGroupInfoVlanThe virtual machine VLANSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.6
vmGroupInfoIsESXSvcConSet to 1 if ESX Service Console Interface, else 0.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.7
vmGroupInfoIsVMKSet to 1 if VM Kernel Interface, else 0.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.8
vmGroupInfoNameVirtual Machine Name, if available.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.9
vmGroupInfoUUIDVirtual Machine UUID, if available.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.10
vmGroupInfoVSwitchVirtual Machine VSwitch, if available.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.11
vmGroupInfoPortGroupVirtual Machine Port Group, if available.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.12
vmGroupInfoHostVirtual Machine Host, if available.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.13
vmGroupInfoPortAliasSystem port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.3.12.1.1.14
.1.3.6.1.4.1.20301.2.7.16.1.3.13.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk accessUserInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::accessUserInfoTable'
The table of user information.
accessUserInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.3.13.3.1
An entry in the user information table.
Column Syntax OID
accessUserInfoIndexThe table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.1.3.13.3.1.1
accessUserInfoLockStateLock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator.
Enumeration
Enumerated Values:
1unlocked
2locked
.1.3.6.1.4.1.20301.2.7.16.1.3.13.3.1.2
accessUserInfoClearFailAttemptsAction Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.3.13.3.1.3
accessUserInfoClearLockAction Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.1.3.13.3.1.4
.1.3.6.1.4.1.20301.2.7.16.1.4.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::agPortOperTable'
The table of port operations.
agPortOperTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.4.1.1
A row in the port operations table.
Indexes
Column Syntax OID
portOperIdxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.4.1.1.1
portOperStateEnable/Disable port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.4.1.1.2
portOperRmonEnable/Disable RMON for port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.4.1.1.3
portOperLearningEnable/Disable L2 (FDB) Learning for this port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.1.4.1.1.4
portOperAliasThe port alias..SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.4.1.1.5
.1.3.6.1.4.1.20301.2.7.16.1.4.4 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portOperDot1xTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::portOperDot1xTable'
The table of port operations.
portOperDot1xTableEntry row .1.3.6.1.4.1.20301.2.7.16.1.4.4.1
A row in the port 802.1x operation table.
Column Syntax OID
portOperDot1xIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.1.4.4.1.1
portOperDot1xResetReinitialize 802.1x access control on port.Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.20301.2.7.16.1.4.4.1.2
portOperDot1xReauthInitiate reauthentication on port.Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.20301.2.7.16.1.4.4.1.3
portOperDot1xPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.1.4.4.1.4
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlanCurCfgTable'
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1
A row in the VLAN configuration table.
Column Syntax OID
vlanCurCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.1
vlanCurCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.2
vlanCurCfgStateEnable or disable a VLANEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.3
vlanCurCfgStgThe Spanning Tree Group for the VLAN.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.5
vlanCurCfgVlanNameThe VLAN name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.9
vlanCurCfgPrVlanTypeThe type of the Private VLAN.Enumeration
Enumerated Values:
0none
1primary
2isolated
3community
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.10
vlanCurCfgPrVlanMapPriIdThe primary vlan idSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.2.1.11
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlanNewCfgTable'
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1
A row in the VLAN configuration table.
Column Syntax OID
vlanNewCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.1
vlanNewCfgVlanNameThe VLAN name.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.2
vlanNewCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.3
vlanNewCfgStateEnable or disable a VLANEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.4
vlanNewCfgAddPortIndexThe port to be added to the specified VLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.5
vlanNewCfgRemovePortIndexThe port to be removed from the specified VLAN. A '0'
value is returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.6
vlanNewCfgDeleteThis is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.7
vlanNewCfgStgThe Spanning Tree Group for the VLAN.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.9
vlanNewCfgPrVlanTypeThe type of the Private VLAN.Enumerationr/w
Enumerated Values:
0none
1primary
2isolated
3community
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.13
vlanNewCfgPrVlanMapPriIdThe primary vlan id. To delete set 0.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.14
vlanNewCfgAddPortAliasThe port alias to be added to the specified VLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.28
vlanNewCfgRemovePortAliasThe port alias to be removed from the specified VLAN. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.3.1.29
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pvlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pvlanCurCfgTable'
The table of PROTOCOL VLAN configuration.
pvlanCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1
A row in the Protocol VLAN configuration table.
Column Syntax OID
pvlanCurCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.1
pvlanCurCfgPvlanIdThe PVLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.2
pvlanCurCfgPvlanFrameTypeThe frame type of the PVLAN.Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.3
pvlanCurCfgPvlanEtherTypeThe Ether type of the PVLAN.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.4
pvlanCurCfgPvlanPortsThe port list in the PVLAN. The ports are presented in bitmap format.OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.5
pvlanCurCfgPvlanPrioThe priority of the PVLAN.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.6
pvlanCurCfgPvlanStateEnable or disable a PVLAN.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.7
pvlanCurCfgPvlanTagPortsThe list of tagged-PVLAN ports. The ports are presented in bitmap format.OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.8
pvlanCurCfgPvlanPredefProtoA predefined Protocol (setting EtherType and FrameType to
predefined values).
Enumeration
Enumerated Values:
0userDefined
1decEther2
2ipv4Ether2
3ipv6Ether2
4ipx802dot2
5ipx802dot3
6ipxEther2
7ipxSnap
8netbios
9rarpEther2
10sna802dot2
11snaEther2
12vinesEther2
13xnsEther2
.1.3.6.1.4.1.20301.2.7.16.2.1.1.5.1.9
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6 · 1 row entry · 18 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pvlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pvlanNewCfgTable'
The table of PROTOCOL VLAN configuration.
pvlanNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1
A row in the Protocol VLAN configuration table.
Column Syntax OID
pvlanNewCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.1
pvlanNewCfgPvlanIdThe PVLAN identifier.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.2
pvlanNewCfgPvlanFrameTypeThe frame type of the PVLAN.Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.3
pvlanNewCfgPvlanEtherTypeThe Ehter type of the PVLAN.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.4
pvlanNewCfgPvlanAddPortIndexThe port to be added to the specified PVLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.5
pvlanNewCfgPvlanRemovePortIndexThe port to be removed to the specified PVLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.6
pvlanNewCfgPvlanPrioThe priority of the PVLAN.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.7
pvlanNewCfgPvlanStateEnable or disable a PVLANEnumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.8
pvlanNewCfgPvlanTagPortIndexThe port to be tagged for the specified PVLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.9
pvlanNewCfgPvlanUntagPortIndexThe port to be untagged for the specified PVLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.10
pvlanNewCfgPvlanPortsThe port list in the PVLAN. The ports are presented in bitmap format.OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.11
pvlanNewCfgPvlanTagPortsThe list of tagged-PVLAN ports. The ports are presented in bitmap format.OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.12
pvlanNewCfgPvlanDeleteDelete a PVLANEnumerationr/w
Enumerated Values:
0no
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.13
pvlanNewCfgPvlanPredefProtoA predefined Protocol (setting EtherType and FrameType to
predefined values).
Enumerationr/w
Enumerated Values:
0userDefined
1decEther2
2ipv4Ether2
3ipv6Ether2
4ipx802dot2
5ipx802dot3
6ipxEther2
7ipxSnap
8netbios
9rarpEther2
10sna802dot2
11snaEther2
12vinesEther2
13xnsEther2
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.14
pvlanNewCfgPvlanAddPortAliasThe port alias to be added to the specified PVLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.15
pvlanNewCfgPvlanRemovePortAliasThe port alias to be removed to the specified PVLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.16
pvlanNewCfgPvlanTagPortAliasThe port alias to be tagged for the specified PVLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.17
pvlanNewCfgPvlanUntagPortAliasThe port alias to be untagged for the specified PVLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.1.6.1.18
.1.3.6.1.4.1.20301.2.7.16.2.1.2.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkGroupCurCfgTable'
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.2.2.1
A row in the trunk group configuration table.
Column Syntax OID
trunkGroupCurCfgIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.2.2.1.1
trunkGroupCurCfgPortsThe port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.2.2.1.2
trunkGroupCurCfgStateEnable or disable a trunk group.Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.2.1.2.2.1.3
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkGroupNewCfgTable'
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1
A row in the trunk group configuration table.
Column Syntax OID
trunkGroupNewCfgIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.1
trunkGroupNewCfgPortsThe port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.2
trunkGroupNewCfgAddPortIndexThe port to be added in the trunk group. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.3
trunkGroupNewCfgRemovePortIndexThe port to be deleted from the trunk group. when read, 0
is returned.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.4
trunkGroupNewCfgStateEnable or disable a trunk group.Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.5
trunkGroupNewCfgDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.6
trunkGroupNewCfgAddPortAliasThe port alias to be added in the trunk group. When read, 0 is returned.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.7
trunkGroupNewCfgRemovePortAliasThe port alias to be deleted from the trunk group. when read, 0
is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.2.3.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.2.5 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkLacpGroupCurCfgTable'
The table of LACP trunk group configuration.
trunkLacpGroupCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.2.5.1
A row in the LACP trunk group configuration table.
Column Syntax OID
trunkLacpGroupCurCfgIndexThe identifier of the LACP trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.2.5.1.1
trunkLacpGroupCurCfgAdminKeyThe administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.2.5.1.2
.1.3.6.1.4.1.20301.2.7.16.2.1.2.6 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkLacpGroupNewCfgTable'
The table of LACP trunk group configuration.
trunkLacpGroupNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.2.6.1
A row in the LACP trunk group configuration table.
Column Syntax OID
trunkLacpGroupNewCfgIndexThe identifier of the LACP trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.2.6.1.1
trunkLacpGroupNewCfgAdminKeyThe administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
Value 0 means LACP trunk group deletion.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.2.6.1.2
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stgCurCfgTable'
The table of Spanning Tree Group configuration.
stgCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgCurCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.1
stgCurCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.2
stgCurCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.5
stgCurCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.6
stgCurCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32
Constraints:
range: 4-30
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.7
stgCurCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32
Constraints:
range: 6-40
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.8
stgCurCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.2.1.3.1.1.10
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stgNewCfgTable'
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgNewCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.1
stgNewCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.2
stgNewCfgDefaultCfgSetting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w
Enumerated Values:
1default-config
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.3
stgNewCfgAddVlanThe vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.4
stgNewCfgRemoveVlanThe vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.5
stgNewCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.8
stgNewCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.9
stgNewCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 4-30
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.10
stgNewCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32r/w
Constraints:
range: 6-40
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.11
stgNewCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.13
stgNewCfgRemoveAllVlanThe all vlans to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
Enumerationr/w
Enumerated Values:
1default-config
.1.3.6.1.4.1.20301.2.7.16.2.1.3.2.1.14
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stgCurCfgPortTable'
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1
Information about port configuration of a particular Spanning Tree
Group.
Column Syntax OID
stgCurCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.1
stgCurCfgPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.2
stgCurCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.3
stgCurCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32
Constraints:
range: 0-240
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.4
stgCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.5
stgCurCfgPortAliasThe port alias of a particular Spanning Tree Group.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.3.3.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stgNewCfgPortTable'
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1
Information about port configuration of a particular Spanning Tree
Group.
Column Syntax OID
stgNewCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.1
stgNewCfgPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.2
stgNewCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.3
stgNewCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32r/w
Constraints:
range: 0-240
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.4
stgNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.5
stgNewCfgPortAliasThe port alias of a particular Spanning Tree Group.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.3.4.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pmCurCfgPortMonitorTable'
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1
A row in the monitoring port table.
Column Syntax OID
pmCurCfgPmirrMoniPortIndexThe monitoring port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndexThe mirrored port numberPortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1.2
pmCurCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1.3
pmCurCfgPmirrMoniPortAliasThe monitoring port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1.7
pmCurCfgPmirrMirrPortAliasThe mirrored port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.3.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pmNewCfgPortMonitorTable'
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1
A row in the monitoring port table.
Column Syntax OID
pmNewCfgPmirrMoniPortIndexThe monitoring port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndexThe mirrored port numberPortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.2
pmNewCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.3
pmNewCfgPmirrDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.4
pmNewCfgPmonDeleteSetting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.10
pmNewCfgPmirrMoniPortAliasThe monitoring port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.11
pmNewCfgPmirrMirrPortAliasThe mirrored port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.4.1.4.1.12
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpCurPortCfgTable'
The table of LACP port configuration.
lacpCurPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1
A row in the LACP port configuration table.
Column Syntax OID
lacpCurPortCfgTableIdLACP port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.1
lacpCurPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumeration
Enumerated Values:
1off
2active
3passive
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.2
lacpCurPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-only.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.3
lacpCurPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.4
lacpCurPortActorMinLinksThe current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.5
lacpCurPortSuspendIndividualIt indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumeration
Enumerated Values:
1suspend
2individual
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.6
lacpCurPortAliasLACP port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.5.7.1.7
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpNewPortCfgTable'
The table of LACP port configuration.
lacpNewPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1
A row in the LACP port configuration table.
Column Syntax OID
lacpNewPortCfgTableIdLACP port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.1
lacpNewPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumerationr/w
Enumerated Values:
1off
2active
3passive
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.2
lacpNewPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.3
lacpNewPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.4
lacpNewPortActorMinLinksThe current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.5
lacpNewPortSetToDefaultWhen read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values.
Enumerationr/w
Enumerated Values:
1none
2setDefault
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.6
lacpNewPortSuspendIndividualIt indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumerationr/w
Enumerated Values:
1suspend
2individual
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.7
lacpNewPortAliasLACP port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.5.8.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mstCistCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mstCistCurCfgPortTable'
The table of CIST Port configuration.
mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1
Information about a particular CIST Port configuration.
Column Syntax OID
mstCistCurCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.1
mstCistCurCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32
Constraints:
range: 0-240
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.2
mstCistCurCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32
Constraints:
range: 0-200000000
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.3
mstCistCurCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumeration
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.4
mstCistCurCfgPortEdgeThe value of the Edge Port parameter. (for MSTP only)Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.5
mstCistCurCfgPortStpStateTurn port's Spanning Tree on/off.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.6
mstCistCurCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.7
mstCistCurCfgPortPvstProtectionThe value of the PVST Protection parameter.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.8
mstCistCurCfgPortAliasThe port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.3.1.9
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mstCistNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mstCistNewCfgPortTable'
The table of CIST Port configuration.
mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1
Information about a particular CIST Port configuration.
Column Syntax OID
mstCistNewCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.1
mstCistNewCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32r/w
Constraints:
range: 0-240
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.2
mstCistNewCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32r/w
Constraints:
range: 0-200000000
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.3
mstCistNewCfgPortStpStateTurn port's Spanning Tree on/off.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.6
mstCistNewCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.7
mstCistNewCfgPortPvstProtectionThe value of the PVST Protection parameter.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.8
mstCistNewCfgPortAliasThe port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.7.2.4.1.9
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::failoverCurCfgTriggerTable'
The Failover Trigger Table.
failoverCurCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1
A row in the Failover Trigger Table.
Column Syntax OID
failoverCurCfgTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.1
failoverCurCfgTriggerStateEnable or disable Trigger stateEnumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.2
failoverCurCfgTriggerLimitLimit # of operational linksSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.3
failoverCurCfgTriggerMmonPortThe Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.6
failoverCurCfgTriggerMmonTrunkThe Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.7
failoverCurCfgTriggerMmonKeyThe LACP admin key. This is an array of 16-bit read-only values.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.8
failoverCurCfgTriggerMconPortThe Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.9
failoverCurCfgTriggerMconTrunkThe Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.11
failoverCurCfgTriggerMconKeyThe LACP admin key. This is an array of 16-bit read-only values.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.6.1.12
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7 · 1 row entry · 26 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::failoverNewCfgTriggerTable'
The Failover Trigger Table.
failoverNewCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1
A row in the Failover Trigger Table.
Column Syntax OID
failoverNewCfgTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.1
failoverNewCfgTriggerStateEnable or disable Trigger stateEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.2
failoverNewCfgTriggerLimitLimit # of operational linksInteger32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.3
failoverNewCfgTriggerMmonPortThe Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.10
failoverNewCfgTriggerMmonPortIndexAddAdd port to Manual Monitor. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.11
failoverNewCfgTriggerMmonPortIndexRemRemove port from Manual Monitor. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.12
failoverNewCfgTriggerMmonTrunkThe Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.13
failoverNewCfgTriggerMmonTrunkAddAdd trunk to Manual Monitor. When read, 0 is returned.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.14
failoverNewCfgTriggerMmonTrunkRemRemove trunk from Manual Monitor. When read, 0 is returned.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.15
failoverNewCfgTriggerMmonKeyThe LACP admin key. This is an array of 16-bit read-only values.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.16
failoverNewCfgTriggerMmonKeyAddAdd LACP admin key to Manual Monitor. When read, 0 is returned.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.17
failoverNewCfgTriggerMmonKeyRemRemove LACP admin key from Manual Monitor. When read, 0 is returned.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.18
failoverNewCfgTriggerMconPortThe Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.19
failoverNewCfgTriggerMconPortIndexAddAdd port to Manual Control. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.20
failoverNewCfgTriggerMconPortIndexRemRemove port from Manual Control. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.21
failoverNewCfgTriggerMconTrunkThe Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.25
failoverNewCfgTriggerMconTrunkAddAdd trunk to Manual Control. When read, 0 is returned.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.26
failoverNewCfgTriggerMconTrunkRemRemove trunk from Manual Control. When read, 0 is returned.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.27
failoverNewCfgTriggerMconKeyThe LACP admin key. This is an array of 16-bit read-only values.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.28
failoverNewCfgTriggerMconKeyAddAdd LACP admin key to Manual Control. When read, 0 is returned.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.29
failoverNewCfgTriggerMconKeyRemRemove LACP admin key from Manual Control. When read, 0 is returned.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.30
failoverNewCfgTriggerDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.31
failoverNewCfgTriggerMmonPortAliasAddAdd port to Manual Monitor using its alias. When read, 0 is returned.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.33
failoverNewCfgTriggerMmonPortAliasRemRemove port from Manual Monitor using its alias. When read, 0 is returned.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.34
failoverNewCfgTriggerMconPortAliasAddAdd port to Manual Control using its alias. When read, 0 is returned.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.35
failoverNewCfgTriggerMconPortAliasRemRemove port from Manual Control using its alias. When read, 0 is returned.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.10.7.1.36
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1xCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot1xCurCfgPortTable'
The table of 8021x configuration in the Current_config.
dot1xCurCfgPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1
Information about 8021x Port Config
Column Syntax OID
dot1xCurCfgPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.1
dot1xCurCfgPortModePort authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
Enumeration
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.2
dot1xCurCfgPortQtPeriodQuiet period (0-65535)Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.3
dot1xCurCfgPortTxPeriodTx PeriodInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.4
dot1xCurCfgPortSupTmoutSupplicant timeout (1..65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.5
dot1xCurCfgPortSrvTmoutServer timeout (1..65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.6
dot1xCurCfgPortMaxRqMaximum numer of requests (1..10)Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.7
dot1xCurCfgPortRaPeriodReautentication period (0..604800)Integer32
Constraints:
range: 0-604800
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.8
dot1xCurCfgPortReAuthReAuthentication state
off(0),
on(1)
Enumeration
Enumerated Values:
0off
1on
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.9
dot1xCurCfgPortVlanAssignVlan assignment state
off(0),
on(1)
Enumeration
Enumerated Values:
0off
1on
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.10
dot1xCurCfgPortAliasThe 8021x Port alias for which the table is related.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.12.3.1.11
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1xNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot1xNewCfgPortTable'
The table of 8021x configuration in the new_config.
dot1xNewCfgPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1
Information about 8021x Port Config
Column Syntax OID
dot1xNewCfgPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.1
dot1xNewCfgPortModePort authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)
Enumerationr/w
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.2
dot1xNewCfgPortQtPeriodQuiet period (0..65535)Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.3
dot1xNewCfgPortTxPeriodTx Period (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.4
dot1xNewCfgPortSupTmoutSupplicant Timeout (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.5
dot1xNewCfgPortSrvTmoutServer Timeout (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.6
dot1xNewCfgPortMaxRqMaximum number of requests (1..10)Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.7
dot1xNewCfgPortRaPeriodReauthentication period (1..604800)Integer32r/w
Constraints:
range: 1-604800
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.8
dot1xNewCfgPortReAuthReauthentication state
off(0),
on(1)
Enumerationr/w
Enumerated Values:
0off
1on
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.9
dot1xNewCfgPortDefaultPort default settingsEnumerationr/w
Enumerated Values:
0other
1apply
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.10
dot1xNewCfgPortApplyGlobalApply Global configEnumerationr/w
Enumerated Values:
0other
1apply
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.11
dot1xNewCfgPortVlanAssignEnable/Disable the assignment of vlan from radius server when the
port is successfully autheticated.
Vlan assignment state
off(0),
on(1)
Enumerationr/w
Enumerated Values:
0off
1on
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.12
dot1xNewCfgPortAliasThe 8021x Port alias for which the table is related.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.12.4.1.13
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbCurCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fdbCurCfgStaticTable'
The table of FDB static entries.
fdbCurCfgStaticEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1
A row in the fdb table.
Column Syntax OID
fdbCurCfgEntryIndexThe fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.1
fdbCurCfgVlanAdd vlan for fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.2
fdbCurCfgPortIndexThe MAC address port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.3
fdbCurCfgMacAdd a fdb entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.4
fdbCurCfgTrunkThe MAC address trunk number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.5
fdbCurCfgAdminkeyThe MAC address LACP trunk adminkey.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.6
fdbCurCfgPortAliasThe MAC address port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.2.1.7
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbNewCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fdbNewCfgStaticTable'
The table of FDB static entries.
fdbNewCfgStaticEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1
A row in the fdb table.
Column Syntax OID
fdbNewCfgEntryIndexThe fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.1
fdbNewCfgAddVlanAdd vlan for fdb entry indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.2
fdbNewCfgAddPortIndexThe MAC address port number.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.3
fdbNewCfgAddMacAdd a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.4
fdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.5
fdbNewCfgAddTrunkThe MAC address trunk number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.6
fdbNewCfgAddAdminkeyThe MAC address LACP trunk adminkey.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.7
fdbNewCfgAddPortAliasThe MAC address port alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.3.1.8
.1.3.6.1.4.1.20301.2.7.16.2.1.13.8 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mcastFdbCurCfgTable'
The table of multicast FDB static entries.
mcastFdbCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.13.8.1
A row in the multicast fdb table.
Column Syntax OID
mcastFdbCurCfgEntryIndexThe multicast fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.8.1.1
mcastFdbCurCfgVlanAdd vlan for multicast fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.8.1.2
mcastFdbCurCfgPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||…
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.13.8.1.3
mcastFdbCurCfgMacAdd a multicast fdb entry.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.8.1.4
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mcastFdbNewCfgTable'
The table of multicast FDB static entries.
mcastFdbNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1
A row in the multicast fdb table.
Column Syntax OID
mcastFdbNewCfgEntryIndexThe multicast fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.1
mcastFdbNewCfgAddVlanAdd vlan for multicast fdb entry indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.2
mcastFdbNewCfgPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.3
mcastFdbNewCfgAddPortIndexThe multicast MAC address port number to be added. A '0'
value is returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.4
mcastFdbNewCfgRemPortIndexThe multicast MAC address port number to be removed. A '0'
value is returned when read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.5
mcastFdbNewCfgAddMacAdd a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.6
mcastFdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.7
mcastFdbNewCfgAddPortAliasThe multicast MAC address port alias to be added. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.8
mcastFdbNewCfgRemPortAliasThe multicast MAC address port alias to be removed. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.13.9.1.9
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::hotlinksCurCfgTriggerTable'
The Hot Links Trigger Table.
hotlinksCurCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1
A row in the Hot Links Trigger Table.
Column Syntax OID
hotlinksCurCfgTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.1
hotlinksCurCfgTriggerNameA textual string containing the trigger name.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.2
hotlinksCurCfgTriggerStateEnable/disable Trigger state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.3
hotlinksCurCfgTriggerPreemptStateEnable/disable Preemption state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.4
hotlinksCurCfgTriggerFdelayForward Delay setting (in secs).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.5
hotlinksCurCfgTriggerMasterPortIndexThe master interface port number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.6
hotlinksCurCfgTriggerMasterTrunkThe master interface trunk number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.7
hotlinksCurCfgTriggerBackupPortIndexThe backup interface port number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.8
hotlinksCurCfgTriggerBackupTrunkThe backup interface trunk number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.9
hotlinksCurCfgTriggerDeleteDelete a Hot Links trigger configuration.Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.10
hotlinksCurCfgTriggerMasterAdminkeyThe master interface admin key number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.11
hotlinksCurCfgTriggerBackupAdminkeyThe backup interface admin key number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.12
hotlinksCurCfgTriggerMasterPortAliasThe master interface port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.17
hotlinksCurCfgTriggerBackupPortAliasThe backup interface port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.14.6.1.18
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::hotlinksNewCfgTriggerTable'
The Hot Links Trigger Table.
hotlinksNewCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1
A row in the Hot Links Trigger Table.
Column Syntax OID
hotlinksNewCfgTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.1
hotlinksNewCfgTriggerNameA textual string containing the trigger name.OctetStringr/w
Constraints:
range: 0-33
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.2
hotlinksNewCfgTriggerStateEnable/disable Trigger state.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.3
hotlinksNewCfgTriggerPreemptStateEnable/disable Preemption state.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.4
hotlinksNewCfgTriggerFdelayForward Delay setting (in secs).SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.5
hotlinksNewCfgTriggerMasterPortIndexThe master interface port number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.6
hotlinksNewCfgTriggerMasterTrunkThe master interface trunk number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.7
hotlinksNewCfgTriggerBackupPortIndexThe backup interface port number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.8
hotlinksNewCfgTriggerBackupTrunkThe backup interface trunk number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.9
hotlinksNewCfgTriggerDeleteDelete a Hot Links trigger configuration.Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.10
hotlinksNewCfgTriggerMasterAdminkeyThe master interface admin key number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.11
hotlinksNewCfgTriggerBackupAdminkeyThe backup interface admin key number.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.12
hotlinksNewCfgTriggerMasterPortAliasThe master interface port alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.17
hotlinksNewCfgTriggerBackupPortAliasThe backup interface port alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.14.7.1.18
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpCurCfgPortTable'
The table of LLDP port configuration in the current_configuration
block.
lldpCurCfgPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1
A row in the LLDP port configuration table in the
current_configuration block.
Column Syntax OID
lldpCurCfgPortIndxThe index of the row in LLDP port configurations table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.1
lldpCurCfgPortAdmStatThis is the admin status of the LLDP port.Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.2
lldpCurCfgPortSnmpTrapThis is the SNMP trap notification state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.3
lldpCurCfgPortportdesctlvThis is the Port Description TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.4
lldpCurCfgPortsysnametlvThis is the System Name TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.5
lldpCurCfgPortsysdescrtlvThis is the System Description TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.6
lldpCurCfgPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.7
lldpCurCfgPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.8
lldpCurCfgPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.9
lldpCurCfgPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.10
lldpCurCfgPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.11
lldpCurCfgPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.12
lldpCurCfgPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.13
lldpCurCfgPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.14
lldpCurCfgPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.15
lldpCurCfgPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.16
lldpCurCfgPortdcbxtlvThis is the DCBX TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.17
lldpCurCfgPortevbtlvThis is the EVB TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.18
lldpCurCfgPortAliasThe alias of the row in LLDP port configurations table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.15.2.1.20
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpNewCfgPortTable'
The table of LLDP port configuration in the new_configuration
block.
lldpNewCfgPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1
A row in the LLDP port configuration table in the
new_configuration block.
Column Syntax OID
lldpNewCfgPortIndxThe index of the row in LLDP port configurations table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.1
lldpNewCfgPortAdmStatThis is the admin status of the LLDP port.Enumerationr/w
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.2
lldpNewCfgPortSnmpTrapThis is the SNMP trap notification state of the LLDP portEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.3
lldpNewCfgPortportdesctlvThis is the Port Description TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.4
lldpNewCfgPortsysnametlvThis is the System Name TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.5
lldpNewCfgPortsysdescrtlvThis is the System Description TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.6
lldpNewCfgPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.7
lldpNewCfgPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.8
lldpNewCfgPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.9
lldpNewCfgPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.10
lldpNewCfgPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.11
lldpNewCfgPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.12
lldpNewCfgPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.13
lldpNewCfgPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.14
lldpNewCfgPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.15
lldpNewCfgPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.16
lldpNewCfgPortalltlvSet the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3other
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.17
lldpNewCfgPortdcbxtlvThis is the DCBX TLV state of the LLDP port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.18
lldpNewCfgPortAliasThe port of the row in LLDP port configurations table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.1.15.3.1.20
.1.3.6.1.4.1.20301.2.7.16.2.1.18.6 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagCurCfgTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagCurCfgTrunkTable'
A table of objects of the vLAG groups configured in this
switch.
vlagCurCfgTrunkTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.18.6.1
The configuration objects for an vLAG group.
Column Syntax OID
vlagCurCfgTrunkIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.18.6.1.1
vlagCurCfgTrunkStateThe current administrative state of the vLAG group.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.18.6.1.2
.1.3.6.1.4.1.20301.2.7.16.2.1.18.7 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagNewCfgTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagNewCfgTrunkTable'
A table of objects of the vLAG groups configured in this
switch.
vlagNewCfgTrunkTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.18.7.1
The configuration objects for an vLAG group.
Column Syntax OID
vlagNewCfgTrunkIndexThe identifier of the trunk group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.1.18.7.1.1
vlagNewCfgTrunkStateThe new administrative state of the vLAG group.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.18.7.1.2
.1.3.6.1.4.1.20301.2.7.16.2.1.18.8 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagCurCfgLacpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagCurCfgLacpTable'
A table of objects of the vLAG groups configured in this
switch.
vlagCurCfgLacpTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.18.8.1
The configuration objects for an vLAG group.
Column Syntax OID
vlagCurCfgLacpKeyThe identifier of the trunk group.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.18.8.1.1
vlagCurCfgLacpStateThe current administrative state of the vLAG group.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.18.8.1.2
.1.3.6.1.4.1.20301.2.7.16.2.1.18.9 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagNewCfgLacpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagNewCfgLacpTable'
A table of objects of the vLAG groups configured in this
switch.
vlagNewCfgLacpTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.1.18.9.1
The configuration objects for an vLAG group.
Column Syntax OID
vlagNewCfgLacpKeyThe identifier of the trunk group.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.2.1.18.9.1.1
vlagNewCfgLacpStateThe new administrative state of the vLAG group.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.1.18.9.1.2
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stgStatsPortTable'
The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1
Statistics about port of a particular Spanning Tree Group.
Column Syntax OID
stgStatsStpIndexThe identifier of a particular Spanning Tree Group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.1
stgStatsPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.2
stgStatsPortRcvBpdusNumber of total BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.3
stgStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.4
stgStatsPortLastTcnRcvTime of last TCN BPDU's received on this port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.5
stgStatsPortXmtBpdusNumber of total BPDU's transmitted on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.6
stgStatsPortXmtTcnBpdusNumber of TCN BPDU's trasmitted from the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.7
stgStatsPortLastTcnXmtTime of last TCN BPDU's transmitted on this port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.8
stgStatsPortDropBpdusNumber of total BPDU's dropped on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.9
stgStatsPortAliasThe port alias of a particular Spanning Tree Group.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.2.1.1.10
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpStatsTable'
The table of LACP Stats.
lacpStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1
Lacp status info.
Indexes
Column Syntax OID
lacpStatsIndexIndexPortNumber.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.1
lacpdusRxValid LACPDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.2
markerpdusRxValid Marker PDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.3
markerresponsepdusRxValid Marker Rsp PDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.4
unknownRxUnknown version/TLV typeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.5
illegalRxIllegal subtype receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.6
lacpdusTxLACPDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.7
markerpdusTxMarket PDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.8
markerresponsepdusTxMarker Rsp PDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.9
lacpClearStatsSetting this to clear(2) results in clearing the LACP statistics.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.10
lacpStatsPortAliasPort Alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.4.1.1.11
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksStatsTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::hotlinksStatsTriggerTable'
The Hot Links Trigger Table Stats.
hotlinksStatsTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1
A row in the Hot Links Trigger Table Stats.
Column Syntax OID
hotlinksStatsTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.1
hotlinksStatsTriggerNameA textual string containing the trigger name.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.2
hotlinksStatsTriggerMasterActiveThe number of times the master interface was set to active.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.3
hotlinksStatsTriggerBackupActiveThe number of times the backup interface was set to active.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.4
hotlinksStatsTriggerFdbUpdateThe number of times an FDB update was performed.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.5
hotlinksStatsTriggerFdbFailedThe number of times an FDB update failed.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.6.1.1.6
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpStatsTable'
The table of LLDP statistics.
lldpStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1
LLDP statistics info.
Indexes
Column Syntax OID
lldpStatsIndexThe index of the row in LLDP port statistics.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.1
lldpStatsFramesOutTotalThe total number of LLDP frames transmitted in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.2
lldpStatsFramesInTotalThe total number of LLDP frames received in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.3
lldpStatsFramesInErrorsTotalThe total number of erroneous LLDP frames received in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.4
lldpStatsFramesDiscardedTotalThe total number of received LLDP frames discarded in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.5
lldpStatsTLVsUnrecognizedTotalThe total number of unrecognized TLVs in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.6
lldpStatsAgeoutsTotalThe total number of neighbor's information deleted in this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.7
lldpStatsClearSetting this to clear(2) results in clearing the LLDP statistics.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.8
lldpStatsPortAliasThe alias of the row in LLDP port statistics.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.7.2.1.9
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk oamStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::oamStatsPortTable'
The table of OAM port statistics.
oamStatsPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1
Statistics about OAM Port
Column Syntax OID
oamStatsPortIndexThe OAM Port number for which the table is related.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.1
oamStatsPortInfoTxThe number of transmitted OAM information packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.2
oamStatsPortInfoRxThe number of received OAM information packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.3
oamStatsPortUnsupTxThe number of transmitted OAM unsupported packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.4
oamStatsPortUnsupRxThe number of received OAM unsupported packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.5
oamStatsPortLocalLinkFaultsThe number of local OAM link fault packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.6
oamStatsPortLocalCriticalEventsThe number of local OAM critical event packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.7
oamStatsPortLocalDyingGaspsThe number of local OAM dying gasp packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.8
oamStatsPortRemoteLinkFaultsThe number of remote OAM link fault packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.9
oamStatsPortRemoteCriticalEventsThe number of remote OAM critical event packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.10
oamStatsPortRemoteDyingGaspsThe number of remote OAM dying gasp packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.11
oamStatsPortAliasThe alias of the row in OAM Stats port configuration table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.8.1.1.12
.1.3.6.1.4.1.20301.2.7.16.2.2.12.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsTxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::slpStatsTxCountersTable'
A table with all the SLP Send counters.
slpStatsTxCounterEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.12.1.1
The configuration objects for a SLP Send counter entry.
Column Syntax OID
slpTxCounterIndexThe index of this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.1.1.1
slpTxCounterNameThe name of this counter.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.2.2.12.1.1.2
slpTxCounterUnicastThe unicast value of this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.1.1.3
slpTxCounterMulticastThe multicast value of this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.1.1.4
.1.3.6.1.4.1.20301.2.7.16.2.2.12.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsRxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::slpStatsRxCountersTable'
A table with all the SLP Receive counters.
slpStatsRxCounterEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.12.2.1
The configuration objects for a SLP Receive counter entry.
Column Syntax OID
slpRxCounterIndexThe index this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.2.1.1
slpRxCounterNameThe name of this counter.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.2.2.12.2.1.2
slpRxCounterUnicastThe unicast value of this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.2.1.3
slpRxCounterMulticastThe multicast value of this counter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.2.12.2.1.4
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cistStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::cistStatsPortTable'
The table of Common and Internal Spanning Tree port statistics.
cistStatsPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1
Statistics about port of Common and Internal Spanning Tree.
Column Syntax OID
cistStatsPortIndexThe port identifier of CIST.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.1
cistStatsPortRcvBpdusNumber of BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.2
cistStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.3
cistStatsPortLastTcnRcvTime of Last TCN BPDU's received on this port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.4
cistStatsPortXmtBpdusNumber of BPDU's transmitted from the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.5
cistStatsPortXmtTcnBpdusNumber of TCN BPDU's transmitted from the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.6
cistStatsPortLastTcnXmtTime of Last TCN BPDU's transmitted from this port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.7
cistStatsPortDropBpdusNumber of BPDU's dropped on the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.2.13.1.1.8

fdbTable

table
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fdbTable'
The table of FDB entries.
fdbEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1
A row in the FDB table
Indexes
Column Syntax OID
fdbMacAddrThe MAC address for the FDB entry.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.1
fdbVlanThe VLAN ID for the FDB entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.2
fdbSrcPortIndexEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.3
fdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2forward
3trunk
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.4
fdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.7
fdbStatus'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.8
fdbSrcPortAliasEither the value '0', or the port alias of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been le…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.1.2.1.9
.1.3.6.1.4.1.20301.2.7.16.2.3.1.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mcastFdbTable'
The table of static multicast FDB entries.
mcastFdbEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.1.3.1
A row in the static multicast FDB table
Column Syntax OID
mcastFdbEntryIndexThe static multicast fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.1.3.1.1
mcastFdbMacAddrThe static multicast MAC address for the FDB entry.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.2.3.1.3.1.2
mcastFdbVlanThe VLAN ID for the FDB entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.1.3.1.3
mcastFdbSrcPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||…
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.1.3.1.4

stpInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stpInfoTable'
The table of Spanning Tree Group information.
stpInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1
Information about a particular Spanning Tree Group.
Indexes
Column Syntax OID
stpInfoIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.1
stpInfoTimeSinceTopChangeThe time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.2
stpInfoTopChangesThe total number of topology changes detected by this bridge since
the management entity was last reset or initialized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.3
stpInfoDesignatedRootThe bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs origi…
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.4
stpInfoRootCostThe cost of the path to the root as seen from this bridge.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.5
stpInfoRootPortIndexThe port number of the port which offers the lowest cost path from
this bridge to the root bridge.
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.6
stpInfoMaxAgeThe maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.7
stpInfoHelloTimeThe amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.8
stpInfoForwardDelayThis time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.9
stpInfoHoldTimeThis time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.10
stpInfoPreRootThis is previous root bridge before current root bridge selected.BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.11
stpInfoPreRootPortThis is previous root port before current root port selected.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.12
stpInfoRootReplaceTimeThis is Time of new root bridge replacing old root bridge.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.13
stpInfoRootPortAliasThe port alias of the port which offers the lowest cost path from
this bridge to the root bridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.2.1.1.14
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2 · 1 row entry · 15 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::stpInfoPortTable'
The table of Spanning Tree Group port information.
stpInfoPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1
Information about port configuration for a particular Spanning Tree
Group.
Column Syntax OID
stpInfoPortStpIndexThe identifier of a particular Spanning Tree Group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.1
stpInfoPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.2
stpInfoPortStateThe port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it wil…
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
8na
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.3
stpInfoPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.4
stpInfoPortDesignatedCostThe path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.5
stpInfoPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.6
stpInfoPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this
port's segment.
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.7
stpInfoPortForwardTransitionsThe number of times this port has transitioned from the Learning
state to the Forwarding state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.8
stpInfoPortPathCostThe path cost of the port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.9
stpInfoPortRoleThe port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role.
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.10
stpInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this …
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.11
stpInfoPortEdgeThe port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.12
stpInfoPortExtGuardCurrent STP guard state. Not include BPDU Guard.Enumeration
Enumerated Values:
0normal
1loop-inc
2root-inc
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.13
stpInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.14
stpInfoPortAliasThe port alias of a particular Spanning Tree Group.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.2.2.1.15
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpInfoAggrTable'
The table of LACP aggregator information.
lacpInfoAggrTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1
Information about a LACP aggregator.
Column Syntax OID
lacpInfoAggrIndexThe aggregator identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.1
lacpInfoAggrIdLACP aggregator IDSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.2
lacpInfoAggrMacLACP aggregator MAC addressSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.3
lacpInfoAggrActSysPrioLACP aggregator actor system prioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.4
lacpInfoAggrActSysIdLACP aggregator actor system IDSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.5
lacpInfoAggrIndivStateLACP aggregator individual stateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.6
lacpInfoAggrActAdminKeyLACP aggregator actor admin keySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.7
lacpInfoAggrActOperKeyLACP aggregator actor oper keySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.8
lacpInfoAggrPartSysPrioLACP aggregator partner system prioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.9
lacpInfoAggrPartSysIdLACP aggregator partner system IDSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.10
lacpInfoAggrPartOperKeyLACP aggregator partner oper keySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.11
lacpInfoAggrReadyStateLACP aggregator ready stateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.12
lacpInfoAggrNumPortsNumber of ports in aggregatorSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.13
lacpInfoAggrMinLinksMin Links of ports in aggregatorSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.1.1.15
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1 · 1 row entry · 25 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpInfoPortGeneralTable'
The table of LACP port general information.
lacpInfoPortGeneralTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1
General information about a LACP port.
Column Syntax OID
lacpInfoPortGeneralIndexThe port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.1
lacpInfoPortLacpEnaLACP enabled on portEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.2
lacpInfoPortAdminEnaLACP port admin enabledEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.3
lacpInfoPortActSysIdLACP port actor system IDSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.4
lacpInfoPortActSysPrioLACP port actor system prioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.5
lacpInfoPortActAdminKeyLACP port actor admin keySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.6
lacpInfoPortActOperKeyLACP port actor oper keySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.7
lacpInfoPortActPortNumLACP port numberSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.8
lacpInfoPortActPortPrioLACP port prioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.9
lacpInfoPortIndivStateLACP port individual stateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.10
lacpInfoSelAggrIdLACP port selected aggregator IDSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.11
lacpInfoAttAggrIdLACP port attached aggregator IDSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.12
lacpInfoPortReadyNTrue value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.13
lacpInfoPortNttNeed to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.14
lacpInfoPortSelectedSelected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…
Enumeration
Enumerated Values:
1selected
2unselected
3standby
4suspended
5individual
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.15
lacpInfoPortMovedPort Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.16
lacpInfoCollDetStateLACP port collision and detection stateEnumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.17
lacpInfoPortRxStateLACP port RX machine stateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.18
lacpInfoPortMuxStateLACP port Mux machine stateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.19
lacpInfoPortPerStateLACP port periodic machine stateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.20
lacpInfoPortPerTraTimerPeriodic Transmit TimerSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.21
lacpInfoPortCurWhileTimerCurrent While TimerSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.22
lacpInfoPortOperStateThe current operational state of LACP on the port.Enumeration
Enumerated Values:
1disabled
2up
3down
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.23
lacpInfoPortGeneralPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.24
lacpInfoPortActPortAliasLACP port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.1.1.25
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpInfoPortAdminTable'
The table of LACP port admin information.
lacpInfoPortAdminTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1
Admin information about a LACP port.
Column Syntax OID
lacpInfoPortAdminIndexThe port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.1
lacpInfoPortActAdPortStateThe state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.7
lacpInfoPortActAdActivThe state of Actor Administrator Port ActivityEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.8
lacpInfoPortActAdSyncThe state of Actor Administrator Port SynchronizationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.9
lacpInfoPortActAdDefThe state of Actor Administrator Port DefaultedEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.10
lacpInfoPortActAdTimeoutThe state of Actor Administrator Port TimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.11
lacpInfoPortActAdCollThe state of Actor Administrator Port CollectingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.12
lacpInfoPortActAdExpThe state of Actor Administrator Port ExpiredEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.13
lacpInfoPortActAdAggrThe state of Actor Administrator Port AggregationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.14
lacpInfoPortActAdDistThe state of Actor Administrator Port DistributingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.15
lacpInfoPortAdminPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.2.1.25
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3 · 1 row entry · 25 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lacpInfoPortOperTable'
The table of LACP port oper information.
lacpInfoPortOperTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1
Oper information about a LACP port.
Column Syntax OID
lacpInfoPortOperIndexThe port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.1
lacpInfoPortPartOpSysPrioThe value of Partner Operator Port System PrioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.2
lacpInfoPortPartOpSysIdThe value of Partner Operator Port System IDSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.3
lacpInfoPortPartOpKeyThe value of Partner Operator Port KeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.4
lacpInfoPortPartOpPortNumThe Partner Operator Port NumberSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.5
lacpInfoPortPartOpPortPrioThe value of Partner Operator Port PrioritySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.6
lacpInfoPortActOpPortStateThe state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is s…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.7
lacpInfoPortActOpActivThe state of Actor Operator Port ActivityEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.8
lacpInfoPortActOpSyncThe state of Actor Operator Port SynchronizationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.9
lacpInfoPortActOpDefThe state of Actor Operator Port DefaultedEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.10
lacpInfoPortActOpTimeoutThe state of Actor Operator Port TimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.11
lacpInfoPortActOpCollThe state of Actor Operator Port CollectingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.12
lacpInfoPortActOpExpThe state of Actor Operator Port ExpiredEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.13
lacpInfoPortActOpAggrThe state of Actor Operator Port AggregationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.14
lacpInfoPortActOpDistThe state of Actor Operator Port DistributingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.15
lacpInfoPortPartOpPortStateThe state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.16
lacpInfoPortPartOpActivThe state of Partner Operator Port ActivityEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.17
lacpInfoPortPartOpSyncThe state of Partner Operator Port SynchronizationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.18
lacpInfoPortPartOpDefThe state of Partner Operator Port DefaultedEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.19
lacpInfoPortPartOpTimeoutThe state of Partner Operator Port TimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.20
lacpInfoPortPartOpCollThe state of Partner Operator Port CollectingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.21
lacpInfoPortPartOpExpThe state of Partner Operator Port ExpiredEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.22
lacpInfoPortPartOpAggrThe state of Partner Operator Port AggregationEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.23
lacpInfoPortPartOpDistThe state of Partner Operator Port DistributingEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.24
lacpInfoPortOperPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.3.2.3.1.25
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cistInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::cistInfoPortTable'
The table of CIST Port information.
cistInfoPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1
Information about a particular CIST Port.
Column Syntax OID
cistInfoPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.1
cistInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.2
cistInfoPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.3
cistInfoPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.
Enumeration
Enumerated Values:
1disabled
2discarding
4learning
5forwarding
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.4
cistInfoPortRoleSelected Port Role of the port for this spanning tree instance.Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.5
cistInfoPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.6
cistInfoPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.7
cistInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that thi…
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.8
cistInfoPortHelloTimeCIST port Hello TimeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.9
cistInfoPortEdgeThe port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.10
cistRootInfoPortAliasThe port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.4.2.1.11
.1.3.6.1.4.1.20301.2.7.16.2.3.5.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlanInfoTable'
The table of VLAN information.
vlanInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.5.1.1
Information about a particular VLAN.
Indexes
Column Syntax OID
vlanInfoIdThe VLAN identifier.Integer32
Constraints:
range: 1-4090
.1.3.6.1.4.1.20301.2.7.16.2.3.5.1.1.1
vlanInfoNameThe VLAN name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.2.3.5.1.1.2
vlanInfoStatusEnable or disable, VLAN state informationEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.5.1.1.3
vlanInfoPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.5.1.1.7
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1xInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dot1xInfoPortTable'
The table of 8021x configuration in the Current_config.
dot1xInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1
Information about 8021x Port Config
Column Syntax OID
dot1xInfoPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.1
dot1xInfoPortAuthModeAuthentication modeEnumeration
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.2
dot1xInfoPortAuthStatusAuthentication statusEnumeration
Enumerated Values:
0authorized
1unauthorized
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.3
dot1xInfoPortAuthPAEStateAuthenticator PAE StateEnumeration
Enumerated Values:
0initialize
1disconnected
2connecting
3authenticating
4authenticated
5aborting
6held
7forceauth
8forceunauth
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.5
dot1xInfoPortBackAuthStateBackend authenticator PAE stateEnumeration
Enumerated Values:
0request
1response
2success
3fail
4timeout
5idle
6initialize
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.6
dot1xInfoPortAssignedVlanVlan assigned from radius server.Value of
0 indicates , no vlan assigned via Radius
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.7
dot1xInfoPortAliasThe 8021x Port alias for which the table is related.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.6.1.1.8
.1.3.6.1.4.1.20301.2.7.16.2.3.9.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkGroupInfoTable'
The table of trunk group information.
trunkGroupInfoTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.9.1.1
A row in trunk group information table.
Column Syntax OID
trunkGroupInfoIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.9.1.1.1
trunkGroupInfoStateTrunk group state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.9.1.1.2
trunkGroupInfoPortsThe port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
…
OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.9.1.1.3
trunkGroupInfoProtocolTrunk group protocol
Static - static trunk group
Lacp - dynamic trunk group
Enumeration
Enumerated Values:
1static
2lacp
.1.3.6.1.4.1.20301.2.7.16.2.3.9.1.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.9.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::trunkGroupInfoPortTable'
The table of Trunk Group Info.
trunkGroupInfoPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.9.2.1
A row in the Trunk Info table.
Column Syntax OID
trunkGroupInfoPortTrunkIdThe Trunk identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.9.2.1.1
trunkGroupInfoPortPortIdThe Port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.9.2.1.2
trunkGroupInfoPortStatusThe Port Status.Enumeration
Enumerated Values:
0down
1blocking
2forwarding
.1.3.6.1.4.1.20301.2.7.16.2.3.9.2.1.3
trunkGroupInfoPortAliasThe Port alaias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.9.2.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::hotlinksInfoTriggerTable'
The Hot Links Trigger Table Info.
hotlinksInfoTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1
A row in the Hot Links Trigger Table Info.
Column Syntax OID
hotlinksInfoTriggerIdThe Trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.1
hotlinksInfoTriggerNameA textual string containing the trigger name.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.2
hotlinksInfoTriggerStateEnable/disable Trigger state info.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.3
hotlinksInfoTriggerPreemptStateEnable/disable Preemption state info.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.4
hotlinksInfoTriggerFdelayForward Delay setting info (in secs).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.5
hotlinksInfoTriggerActiveA textual string containing the active interface info.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.10.3.1.6
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1 · 1 row entry · 22 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpInfoPortTable'
The table of LLDP Port Info.
lldpInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1
LLDP Port Info.
Column Syntax OID
lldpInfoPortIndexThe index of the row in LLDP info port table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.1
lldpInfoPortAliasThe port alias of the port in LLDP info port table.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.2
lldpInfoPortMacAddressThe mac address of the port in LLDP info port table.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.3
lldpInfoPortMtuThe MTU size of the port in LLDP info port table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.4
lldpInfoPortEnabledThe PortEnabled field of the port in LLDP info port table.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.5
lldpInfoPortAdminStatusThe Admin Status of the port in LLDP info port table.Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.6
lldpInfoPortRxChangesThe rxChanges field of the port in LLDP info port table.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.7
lldpInfoPortportdesctlvThis is the Port Description TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.8
lldpInfoPortsysnametlvThis is the System Name TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.9
lldpInfoPortsysdescrtlvThis is the System Description TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.10
lldpInfoPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.11
lldpInfoPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.12
lldpInfoPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.13
lldpInfoPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.14
lldpInfoPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.15
lldpInfoPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.16
lldpInfoPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.17
lldpInfoPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.18
lldpInfoPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.19
lldpInfoPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.20
lldpInfoPortdcbxtlvThis is the DCBX TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.21
lldpInfoPortevbtlvThis is the EVB TLV state of the LLDP port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.11.1.1.22
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoTxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpInfoTxTable'
The table of LLDP Transmit State Machine Info.
lldpInfoTxEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1
LLDP Transmit State Machine Info.
Indexes
Column Syntax OID
lldpInfoTxIndexThe index of the row in LLDP Transmit State Machine info table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.1
lldpInfoTxStateThe transmit state of the port in LLDP Transmit State Machine.Enumeration
Enumerated Values:
1txLldpInitialize
2txIdle
3txShutdownFrame
4txInfoFrame
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.2
lldpInfoTxLocalChangedThe somethingChangedLocal field of the port in LLDP Transmit
State Machine.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.3
lldpInfoTxTTLThe txTTL timer of the port in LLDP Transmit State Machine.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.4
lldpInfoTxTxTTRThe txTTR timer of the port in LLDP Transmit State Machine.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.5
lldpInfoTxDelayWhileThe txDelayWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.6
lldpInfoTxShutdownWhileThe txShutdownWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.7
lldpInfoTxReinitDelayThe reinitDelay timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.8
lldpInfoTxHoldMultiplierThe msgTxHold timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.9
lldpInfoTxTransmitIntervalThe msgTxInterval timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.10
lldpInfoTxTransmitDelayThe txDelay timer of the port in LLDP Transmit State Machine.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.11
lldpInfoTxDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.12
lldpInfoTxPortAliasThe alias of the row in LLDP Transmit State Machine info table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.11.2.1.13
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpInfoRxTable'
The table of LLDP Receive State Machine Info.
lldpInfoRxEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1
LLDP Receive State Machine Info.
Indexes
Column Syntax OID
lldpInfoRxIndexThe index of the row in LLDP Receive State Machine info table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.1
lldpInfoRxStateThe receive state of the port in LLDP Receive State Machine.Enumeration
Enumerated Values:
1lldpWaitPortOperational
2deleteAgedInfo
3rxLldpInitialize
4rxWaitForFrame
5rxFrame
6deleteInfo
7updateInfo
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.2
lldpInfoRxBadFrameThe badFrame field of the port in LLDP Receive State Machine.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.3
lldpInfoRxRcvFrameThe rcvFrame field of the port in LLDP Receive State Machine.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.4
lldpInfoRxRxInfoAgeThe rxInfoAge field of the port in LLDP Receive State Machine.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.5
lldpInfoRxRemoteChangedThe somethingChangedRemote field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.6
lldpInfoRxTooManyNeighborsThe tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.7
lldpInfoRxSNMPNotifyThe tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.8
lldpInfoRxRxTTLThe rxTTL timer of the port in LLDP Receive State Machine.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.9
lldpInfoRxTooManyNeighborTimerThe tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.10
lldpInfoRxDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.11
lldpInfoRxPortAliasThe alias of the row in LLDP Receive State Machine info table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.11.3.1.12
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpInfoRemoteDevicesTable'
The table of LLDP remote devices Info.
lldpInfoRemoteDevicesEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1
LLDP remote devices Info.
Column Syntax OID
lldpInfoRemoteDevicesIndexThe index of the row in LLDP remote devices info table.Integer32
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.1
lldpInfoRemoteDevicesRemoteTTLThe remote TTL of the LLDP remote devices entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.3
lldpInfoRemoteDevicesRxChangesThe rxChanges field of the LLDP remote devices entry.Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.4
lldpInfoRemoteDevicesLocalPortThe local port alias of the LLDP remote devices entry.OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.5
lldpInfoRemoteDevicesChassisSubtypeThe chassis ID subtype of the LLDP remote devices entry.Enumeration
Enumerated Values:
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7locallyAssigned
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.6
lldpInfoRemoteDevicesChassisIdThe chassis ID of the LLDP remote devices entry.OctetString
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.7
lldpInfoRemoteDevicesPortSubtypeThe port ID subtype of the LLDP remote devices entry.Enumeration
Enumerated Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7locallyAssigned
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.8
lldpInfoRemoteDevicesPortIdThe port ID of the LLDP remote devices entry.OctetString
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.9
lldpInfoRemoteDevicesSystemNameThe system name of the LLDP remote devices entry.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.10
lldpInfoRemoteDevicesSystemDescriptionThe system description of the LLDP remote devices entry.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.11
lldpInfoRemoteDevicesPortDescriptionThe port description of the LLDP remote devices entry.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.12
lldpInfoRemoteDevicesSystemCapSupportedThe supported system capabilities of the LLDP remote devices entry.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.13
lldpInfoRemoteDevicesSystemCapEnabledThe enabled system capabilities of the LLDP remote devices entry.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.14
lldpInfoRemoteDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.2.3.11.4.1.15
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesManAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::lldpInfoRemoteDevicesManAddrTable'
The table of LLDP remote devices management address Info.
lldpInfoRemoteDevicesManAddrEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1
LLDP remote devices management address Info.
Column Syntax OID
lldpInfoRemoteDevicesManAddrSubtypeThe management address subtype of the LLDP remote devices entry.Enumeration
Enumerated Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6all802
7e163
8e164
9f69
10x121
11ipx
12appletalk
13decnetIV
14banyanVines
15e164withNsap
16dns
17distinguishedname
18asnumber
19xtpoveripv4
20xtpoveripv6
21xtpnativemodextp
65535reserved
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1.1
lldpInfoRemoteDevicesManAddrThe management address of the LLDP remote devices entry.OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1.2
lldpInfoRemoteDevicesManAddrIfSubtypeThe interface numbering subtype of the LLDP remote devices
management address entry.
Enumeration
Enumerated Values:
1unknown
2ifIndex
3systemPortNumber
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1.3
lldpInfoRemoteDevicesManAddrIfIdThe interface number of the LLDP remote devices management address
entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1.4
lldpInfoRemoteDevicesManAddrOIDThe object identifier of the LLDP remote devices management address
entry.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.2.3.11.5.1.5
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk evbTLVInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::evbTLVInfoTable'
The table of ECDP TLV Info.
evbTLVInfoEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1
Information about EVB TLV.
Column Syntax OID
evbTLVInfoEntryIndexThe index of the vsi info table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.1
evbPortIndexThe evb tlv port info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.2
evbLocalCapabilityThe local evb tlv capabilityinfo.OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.3
evbLocalCurrentThe local evb tlv current info.OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.4
evbLocalRTEValThe local evb tlv ECP RTE info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.5
evbRemoteCapabilityThe remote evb tlv capability nfo.OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.6
evbRemoteCurrentThe remote evb tlv cuurent info.OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.7
evbRemoteRTEValThe remote evb tlv ECP RTE info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.8
evbPortAliasThe evb tlv port alias info.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.11.7.1.10
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk oamInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::oamInfoPortTable'
The table of OAM port information.
oamInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1
Information about OAM Port
Column Syntax OID
oamInfoPortIndexThe OAM Port number for which the table is related.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.1
oamInfoPortLocalStateOAM local port stateEnumeration
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.2
oamInfoPortLocalModeOAM local port modeEnumeration
Enumerated Values:
0active
1passive
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.3
oamInfoPortLocalLinkStatusOAM local port link statusEnumeration
Enumerated Values:
0ok
1fail
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.4
oamInfoPortLocalStableOAM local port stableEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.5
oamInfoPortLocalSatisfiedOAM local port satisfiedEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.6
oamInfoPortLocalEvaluatingOAM local port evaluatingEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.7
oamInfoPortRemoteModeOAM remote port modeEnumeration
Enumerated Values:
0active
1passive
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.8
oamInfoPortRemoteMACOAM remote port MAC addressSNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.9
oamInfoPortRemoteStableOAM remote port stableEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.10
oamInfoPortRemoteStateValidOAM remote port state validEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.11
oamInfoPortRemoteEvaluatingOAM remote port evaluatingEnumeration
Enumerated Values:
0true
1false
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.12
oamInfoPortAliasThe alias of the row in OAM Info port configuration table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.12.1.1.13
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udldInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::udldInfoPortTable'
The table of UDLD port info.
udldInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1
A row inside UDLD port info table.
Column Syntax OID
udldInfoPortIndexThe index of the row in UDLD port configuration table.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.1
udldInfoPortConfigThe Config field of the port in UDLD port info table.
Shows the administative state of the current port.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.2
udldInfoPortModeThe Mode field of the port in UDLD info port table.
Shows the udld administrative mode for the current port.
Enumeration
Enumerated Values:
1aggresive
2normal
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.3
udldInfoPortLinkThe Link field of the port in UDLD info port table.
Shows the state of the link associated with the port.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.4
udldInfoPortOperationalStatusThe OperationalStatus field of the port in UDLD info port table.
Contains the udld operational state for the current port.
Enumeration
Enumerated Values:
1init
2inactive
3linkup
4advertisement
5detection
6extDetection
7shutdown
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.5
udldInfoPortBidirectionalStatusThe BidirectionalStatus field of the port in UDLD info port table.
Contains the udld bidirectional state for the current port.
Enumeration
Enumerated Values:
1unknown
2unidirectional
3bidirectional
4loop
5neighborMismatch
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.6
udldInfoPortIntervalThe Interval field of the port in UDLD info port table.
The duration, measured in seconds, of the interval during which
UDLD probes are sent, after the linkup or detection phases.
Its time unit is 1 second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.7
udldInfoPortTimeoutThe Timeout field of the port in UDLD info port table.
Length of the detection phase, measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.8
udldInfoPortNeighborCountThe Neighbor field of the port in UDLD info port table.
Contains the number of udld neighbors for the current port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.9
udldInfoPortAliasThe alias of the row in UDLD port configuration table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.13.1.1.10
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udldInfoNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::udldInfoNeighborTable'
The table of UDLD port neighbor info.
udldInfoNeighborEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1
A row inside UDLD port info table.
Column Syntax OID
udldInfoNeighborLocalPortIndexThe index of the port for which neighbor information
will be returned.
PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.1
udldInfoNeighborIndexThe index of the target neighbor among the port neighbors.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.2
udldInfoNeighborExpirationHold time for the given neighbor.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.3
udldInfoNeighborDeviceNameDevice name reported by neigbor.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.4
udldInfoNeighborDeviceIDDevice ID reported by neigbor.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.5
udldInfoNeighborPortIDPort ID reported by neigbor.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.6
udldInfoNeighborLocalPortAliasThe alias of the port for which neighbor information
will be returned.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.13.2.1.7
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::failoverInfoTriggerTable'
This table holds the information for individual triggers
failoverInfoTriggerEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1
A row in the failover trigger table.
Column Syntax OID
failoverInfoTriggerIdThe trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.1
failoverInfoTriggerStateThe trigger state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.2
failoverInfoTriggerLimitLimit number of operational linksSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.3
failoverInfoTriggerMonitorStateThe runtime monitor stateEnumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.4
failoverInfoTriggerMonitorPortsThe list of ports that are monitored. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.5
failoverInfoTriggerControlStateThe runtime control stateEnumeration
Enumerated Values:
1auto-controlled
2auto-disabled
.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.6
failoverInfoTriggerControlPortsThe list of ports that are controlled. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.2.3.14.3.1.7
.1.3.6.1.4.1.20301.2.7.16.2.3.14.4 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoMonPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::failoverInfoMonPortStateTable'
This table holds the information for individual triggers
failoverInfoTriggerMonPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.14.4.1
A row in the failover trigger table.
Column Syntax OID
failoverInfoTriggerMonIdThe trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.14.4.1.1
failoverInfoTriggerMonPortIdThe Port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.14.4.1.2
failoverInfoTriggerMonPortStatusThe Port Status.Enumeration
Enumerated Values:
0failed
1operational
.1.3.6.1.4.1.20301.2.7.16.2.3.14.4.1.3
failoverInfoTriggerMonPortAliasThe Port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.14.4.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.14.5 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoCtlPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::failoverInfoCtlPortStateTable'
This table holds the information for individual triggers
failoverInfoTriggerCtlPortEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.14.5.1
A row in the failover trigger table.
Column Syntax OID
failoverInfoTriggerCtlIdThe trigger identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.14.5.1.1
failoverInfoTriggerCtlPortIdThe Port identifier.PortNumber.1.3.6.1.4.1.20301.2.7.16.2.3.14.5.1.2
failoverInfoTriggerCtlPortStatusThe Port Status.Enumeration
Enumerated Values:
0failed
1operational
.1.3.6.1.4.1.20301.2.7.16.2.3.14.5.1.3
failoverInfoTriggerCtlPortAliasThe Port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.14.5.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagInfoInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagInfoInstanceTable'
A table of objects of the running vLAG instances.
vlagInfoInstanceEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1.1
The configuration objects for an vLAG group.
Indexes
Column Syntax OID
vlagInstanceIdThe identifier of this instance.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1.1.1
vlagInstanceTrunkIdThe trunk id of this vLAG instance.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1.1.2
vlagInstanceAdminKeyAdminKey of this vLAG instance. Applicable only incase of
dynamic trunks.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1.1.3
vlagInstanceStateThe current running state of the vLAG instance.Enumeration
Enumerated Values:
1down
2localUp
3remoteUp
4formed
.1.3.6.1.4.1.20301.2.7.16.2.3.16.2.1.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagInfoVrrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlagInfoVrrpTable'
The table of vLAG-enabled VRRP virtual router run-time information.
vlagInfoVrrpEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1.1
The run-time information about a vLAG-enabled VRRP virtual router.
Column Syntax OID
vlagVrrpVirtRtrIndexThe vLAG-enabled VRRP virtual router index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1.1.1
vlagVrrpVirtRtrIDThe vLAG-enabled VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1.1.2
vlagVrrpVirtRtrLocalStateThe vLAG-enabled VRRP virtual router local state.Enumeration
Enumerated Values:
1init
2master
3backup
4holdoff
5unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1.1.3
vlagVrrpVirtRtrPeerStateThe vLAG-enabled VRRP virtual router peer state.Enumeration
Enumerated Values:
1init
2master
3backup
4holdoff
5unknown
.1.3.6.1.4.1.20301.2.7.16.2.3.16.3.1.1.4
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ecpChnlInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ecpChnlInfoTable'
The table of ECP channel Info.
ecpChnlInfoEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1
Information about ECP channel.
Column Syntax OID
ecpChnlInfoEntryIndexThe index of the ecp chnl info table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.1
ecpChnlPortIndexThe ecp channel port info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.2
ecpChnlStagThe ecp channel stag info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.3
ecpChnlSndlenThe ecp channel send length info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.4
ecpChnlSndnxtThe ecp channel send next info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.5
ecpChnlRcvlastThe ecp channel recv last sequence info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.6
ecpChnlStateMachineThe ecp channel state machineinfo.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.7
ecpChnlRxCntThe ecp channel Rx count info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.8
ecpChnlTxCntThe ecp channel Tx count info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.9
ecpChnlRxDropThe ecp channel RxDrop info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.10
ecpChnlTxDropThe ecp channel TxDrop info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.11
ecpChnlStateThe ecp channel state info.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.12
ecpChnlAckErrThe ecp channel ACK error info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.13
ecpChnlPortAliasThe ecp channel port alias info.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.2.3.17.1.1.14
.1.3.6.1.4.1.20301.2.7.16.2.3.18.1.3 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoListeningIPInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::slpInfoListeningIPInterfaceTable'
A table with all the SLP listening IP interfaces.
slpInfoListeningIPInterfaceEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.18.1.3.1
The configuration objects for a SLP listening IP interface.
Column Syntax OID
listeningIPInterfaceIdThe identifier of this IP interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.18.1.3.1.1
listeningIPInterfaceAddressThe adddress of this IP interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.2.3.18.1.3.1.2
.1.3.6.1.4.1.20301.2.7.16.2.3.18.2.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoDirectoryAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::slpInfoDirectoryAgentsTable'
A table with all the SLP Directory Agents.
slpInfoDirectoryAgentEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.18.2.1.1
The configuration objects for a Directory Agent entry.
Column Syntax OID
directoryAgentAddressThe IP adddress of this Directory Agent.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.2.3.18.2.1.1.1
directoryAgentPortThe port of this Directory Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.18.2.1.1.2
directoryAgentTimeThe time elapsed from the moment when this Directory Agent
was learned measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.18.2.1.1.3
.1.3.6.1.4.1.20301.2.7.16.2.3.18.3.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoUserAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::slpInfoUserAgentsTable'
A table with all the SLP User Agents.
slpInfoUserAgentEntry row .1.3.6.1.4.1.20301.2.7.16.2.3.18.3.1.1
The configuration objects for a User Agent entry.
Column Syntax OID
userAgentAddressThe IP adddress of this User Agent.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.2.3.18.3.1.1.1
userAgentPortThe port of this User Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.18.3.1.1.2
userAgentTimeThe time elapsed from the moment when this User Agent was learned
measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.2.3.18.3.1.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2 · 1 row entry · 24 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgIntfTable'
The table of IP interface configuration.
ipCurCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1
A row in the Ip interface table
Column Syntax OID
ipCurCfgIntfIndexThe interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.1
ipCurCfgIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:x…
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.2
ipCurCfgIntfMaskThe subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetString
Constraints:
range: 0-15
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.3
The broadcast address of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.4
ipCurCfgIntfVlanThe VLAN associated with the interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.5
ipCurCfgIntfStateThe state of the interface.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.6
ipCurCfgIntfBootpRelayEnable/disable BOOTP relay.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.7
ipCurCfgIntfRouteAdvEnable/disable route advertisement of the interface.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.12
ipCurCfgIntfManagedCfgEnable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.13
ipCurCfgIntfOtherCfgEnable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.14
ipCurCfgIntfAdvLifetimeSet Router Advertisement lifetime of the interface.Integer32
Constraints:
range: 0-9000
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.15
ipCurCfgIntfDadAttemptsSet the number of duplicate address detection (dad)
attempts of the interface.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.16
ipCurCfgIntfReachTimeSet the advertised reachability time of the interface in ms.Unsigned32
Constraints:
range: 0-3600000
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.17
ipCurCfgIntfAdvIntervalSet the IPv6 Router Advertisement interval of the interface.Integer32
Constraints:
range: 4-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.18
ipCurCfgIntfAdvIntervalMinSet the IPv6 Router Advertisement Minimum interval limit
of the interface.
Integer32
Constraints:
range: 3-1350
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.19
ipCurCfgIntfRetransmitTimerSet the IPv6 Router Advertisement Retransmit Timer in ms.Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.20
ipCurCfgIntfHopLimitSet the IPv6 Router Advertisement Current Hop LimitInteger32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.21
ipCurCfgIntfAdvMtuEnable/disable Advertise MTU option.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.22
ipCurCfgIntfIp6HostEnable/disable IPv6 host mode on the interface.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.23
ipCurCfgSecIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:…
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.25
ipCurCfgSecIntfPrefixThe IPv6 prefix length (integer in range 0..128)
associated with this IP address .
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.26
ipCurCfgIntfAnycastThis field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.
Enumeration
Enumerated Values:
1anycast
2none
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.27
ipCurCfgSecIntfAnycastThis field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.
Enumeration
Enumerated Values:
1anycast
2none
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.28
ipCurCfgIntfIp6DstunEnable/disable sending of ICMP Unreachable messages.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.2.1.29
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3 · 1 row entry · 24 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgIntfTable'
The table of interface in the new configuration block.
ipNewCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1
A row in the Ip interface table
Column Syntax OID
ipNewCfgIntfIndexThe interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.1
ipNewCfgIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:x…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.2
ipNewCfgIntfMaskThe subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.3
ipNewCfgIntfVlanThe VLAN associated with the interface.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.5
ipNewCfgIntfStateThe state of the interface.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.6
ipNewCfgIntfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.7
ipNewCfgIntfBootpRelayEnable/disable BOOTP relay.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.8
ipNewCfgIntfRouteAdvEnable/disable route advertisement of the interface.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.13
ipNewCfgIntfManagedCfgEnable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.14
ipNewCfgIntfOtherCfgEnable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.15
ipNewCfgIntfAdvLifetimeSet Router Advertisement lifetime of the interface.Integer32r/w
Constraints:
range: 0-9000
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.16
ipNewCfgIntfDadAttemptsSet the number of duplicate address detection (dad)
attempts of the interface.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.17
ipNewCfgIntfReachTimeSet the advertised reachability time of the interface in ms.Unsigned32r/w
Constraints:
range: 0-3600000
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.18
ipNewCfgIntfAdvIntervalSet the IPv6 Router Advertisement interval of the interface.Integer32r/w
Constraints:
range: 4-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.19
ipNewCfgIntfAdvIntervalMinSet the IPv6 Router Advertisement Minimum interval limit
of the interface.
Integer32r/w
Constraints:
range: 3-1350
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.20
ipNewCfgIntfRetransmitTimerSet the IPv6 Router Advertisement Retransmit Timer in ms.Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.21
ipNewCfgIntfHopLimitSet the IPv6 Router Advertisement Current Hop LimitInteger32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.22
ipNewCfgIntfAdvMtuEnable/disable Advertise MTU option.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.23
ipNewCfgIntfIp6HostEnable/disable IPv6 host mode on the interface.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.24
ipNewCfgSecIntfAddrThis field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxx…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.26
ipNewCfgSecIntfPrefixThe IPv6 prefix length (integer in range 0..128)
associated with this IP address .
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.27
ipNewCfgIntfAnycastThis field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.
Enumerationr/w
Enumerated Values:
1anycast
2none
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.28
ipNewCfgSecIntfAnycastThis field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.
Enumerationr/w
Enumerated Values:
1anycast
2none
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.29
ipNewCfgIntfIp6DstunEnable/disable sending of ICMP Unreachable messages.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.1.3.1.30
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgGwTable'
The table of gateways in the current configuration block.
ipCurCfgGwEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1
A row in the Ip gateway table
Indexes
Column Syntax OID
ipCurCfgGwIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.1
ipCurCfgGwAddrThe IP address of the default gateway.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.2
ipCurCfgGwIntervalThe interval between ping attempts.Integer32
Constraints:
range: 0-60
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.3
ipCurCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.Integer32
Constraints:
range: 1-120
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.4
ipCurCfgGwStateThe state of the default gateway.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.5
ipCurCfgGwArpThe state of ARP only health checks.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.2.4.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgGwTable'
The table of gateway in the new configuration block.
ipNewCfgGwEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1
A row in the Ip default gateway table
Indexes
Column Syntax OID
ipNewCfgGwIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.1
ipNewCfgGwAddrThe IP address of the default gateway.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.2
ipNewCfgGwIntervalThe interval in seconds between ping attempts.Integer32r/w
Constraints:
range: 0-60
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.3
ipNewCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.Integer32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.4
ipNewCfgGwStateThe state of the default gateway.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.5
ipNewCfgGwDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.6
ipNewCfgGwArpThe state of the ARP only health checks.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.2.5.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgStaticRouteTable'
The table of static routes in the current configuration block.
ipCurCfgStaticRouteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1
A row in the static IP route table
Column Syntax OID
ipCurCfgStaticRouteIndxThe index of the static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1.1
ipCurCfgStaticRouteDestIpThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1.2
ipCurCfgStaticRouteMaskThe current subnet mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1.3
ipCurCfgStaticRouteGatewayThe current gateway of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1.4
ipCurCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.3.2.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgStaticRouteTable'
The table of static routes in the new configuration block.
ipNewCfgStaticRouteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1
A row in the static IP route table
Column Syntax OID
ipNewCfgStaticRouteIndxThe index of the static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.1
ipNewCfgStaticRouteDestIpThe destination IP address of this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.2
ipNewCfgStaticRouteMaskThe subnet mask of this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.3
ipNewCfgStaticRouteGatewayThe IP address of the gateway for this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.4
ipNewCfgStaticRouteActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.5
ipNewCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.3.3.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpCurCfgVirtRtrTable'
The table of VRRP virtual routers in the current configuration block.
vrrpCurCfgVirtRtrTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1
Information about a VRRP virtual router.
Column Syntax OID
vrrpCurCfgVirtRtrIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.1
vrrpCurCfgVirtRtrIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.2
vrrpCurCfgVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.3
vrrpCurCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.4
vrrpCurCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.5
vrrpCurCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.6
vrrpCurCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.7
vrrpCurCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.9
vrrpCurCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.10
vrrpCurCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.15
vrrpCurCfgVirtRtrStateEnable or disable the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.16
vrrpCurCfgVirtRtrFastAdvertisementThis object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVER…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.17
vrrpCurCfgVirtRtrPreDelayThe pre-emptive delay interval in seconds.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.3.1.18
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpNewCfgVirtRtrTable'
The table of VRRP virtual routers in the current configuration block.
vrrpNewCfgVirtRtrTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1
Information about a VRRP virtual router.
Column Syntax OID
vrrpNewCfgVirtRtrIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.1
vrrpNewCfgVirtRtrIDThe VRRP virtual router identifier.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.2
vrrpNewCfgVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.3
vrrpNewCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.4
vrrpNewCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.5
vrrpNewCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual router.Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.6
vrrpNewCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.7
vrrpNewCfgVirtRtrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.8
vrrpNewCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.10
vrrpNewCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.11
vrrpNewCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.12
vrrpNewCfgVirtRtrStateEnable or disable the VRRP virtual router.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.17
vrrpNewCfgVirtRtrFastAdvertisementThis object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only w…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.18
vrrpNewCfgVirtRtrPreDelayThe pre-emptive delay interval in seconds.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.4.1.19
.1.3.6.1.4.1.20301.2.7.16.3.1.6.6 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpCurCfgIfTable'
The table of VRRP interface in the current configuration block.
vrrpCurCfgIfTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.6.1
Information about a VRRP interface.
Column Syntax OID
vrrpCurCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.6.1.1
vrrpCurCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.
Enumeration
Enumerated Values:
1none
2simple-text-password
.1.3.6.1.4.1.20301.2.7.16.3.1.6.6.1.2
vrrpCurCfgIfPasswdThe password for authentication.OctetString
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.3.1.6.6.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.6.7 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpNewCfgIfTable'
The table of VRRP interface in the current configuration block.
vrrpNewCfgIfTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.7.1
Information about a VRRP interface.
Column Syntax OID
vrrpNewCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.7.1.1
vrrpNewCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.
Enumerationr/w
Enumerated Values:
1none
2simple-text-password
.1.3.6.1.4.1.20301.2.7.16.3.1.6.7.1.2
vrrpNewCfgIfPasswdThe password for authentication.OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.1.6.7.1.3
vrrpNewCfgIfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.6.7.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpCurCfgVirtRtrGrpTable'
The table of VRRP virtual router group in the current configuration block.
vrrpCurCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1
Information about a VRRP failover virtual router.
Column Syntax OID
vrrpCurCfgVirtRtrGrpIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.1
vrrpCurCfgVirtRtrGrpIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.2
vrrpCurCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.3
vrrpCurCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.4
vrrpCurCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.5
vrrpCurCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.6
vrrpCurCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.7
vrrpCurCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.10
vrrpCurCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.11
vrrpCurCfgVirtRtrGrpFastAdvertisementThis object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVER…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.16
vrrpCurCfgVirtRtrGrpIfRestrictedIf this object has a value of enabled(1), advertisements
for the group are restricted to the interface identified
by the vrrpNewCfgVirtRtrGrpIfIndex object. Otherwise,
advertisements are transmitted on every interface o…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.17
vrrpCurCfgVirtRtrGrpPredelayThe pre-emptive delay interval in seconds for specified VRRP virtual routers.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.9.1.21
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpNewCfgVirtRtrGrpTable'
The table of VRRP virtual router group in the new configuration block.
vrrpNewCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1
Information about a VRRP failover virtual router.
Column Syntax OID
vrrpNewCfgVirtRtrGrpIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.1
vrrpNewCfgVirtRtrGrpIDThe VRRP virtual router identifier.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.2
vrrpNewCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.3
vrrpNewCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.4
vrrpNewCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual router.Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.5
vrrpNewCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.6
vrrpNewCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.7
vrrpNewCfgVirtRtrGrpDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.8
vrrpNewCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.11
vrrpNewCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.12
vrrpNewCfgVirtRtrGrpFastAdvertisementThis object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only w…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.17
vrrpNewCfgVirtRtrGrpIfRestrictedIf this object is set to enabled(1), advertisements for
the group will be restricted to the interface identified
by the vrrpNewCfgVirtRtrGrpIfIndex object. Otherwise,
advertisements will be transmitted on every interfac…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.18
vrrpNewCfgVirtRtrGrpPredelayThe pre-emptive delay interval in seconds.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.6.10.1.21
.1.3.6.1.4.1.20301.2.7.16.3.1.8.20 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpGlobalServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgBootpGlobalServerTable'
The table of global BOOTP server addresses
ipCurCfgBootpGlobalServerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.20.1
A row in the ipCurCfgBootpGlobalServerAddrTable
Column Syntax OID
ipCurCfgBootpGlobalServerIndexThe index of ipCurCfgBootpGlobalServerTableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.20.1.1
ipCurCfgBootpGlobalServerAddressThe current global server IP.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.8.20.1.2
.1.3.6.1.4.1.20301.2.7.16.3.1.8.21 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpGlobalServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgBootpGlobalServerTable'
The table of global BOOTP server addresses
ipNewCfgBootpGlobalServerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.21.1
A row in the ipNewCfgBootpGlobalServerAddrTable
Column Syntax OID
ipNewCfgBootpGlobalServerIndexThe index of ipCurCfgBootpGlobalServerTableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.21.1.1
ipNewCfgBootpGlobalServerAddressThe current global server IP.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.8.21.1.2
.1.3.6.1.4.1.20301.2.7.16.3.1.8.22 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpBcastDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgBootpBcastDomainTable'
The table of broadcast domain settings
ipCurCfgBootpBcastDomainEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.22.1
A row in the broadcast domain table
Column Syntax OID
ipCurCfgBootpBcastDomainIndexThe index of the broadcast domain entrySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.22.1.1
ipCurCfgBootpBcastDomainVlanThe VLAN of the broadcast domain entrySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.22.1.2
ipCurCfgBootpBcastDomainEnableThe state of the broadcast domain entryEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.8.22.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.8.23 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpBcastDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgBootpBcastDomainTable'
The table of broadcast domain settings
ipNewCfgBootpBcastDomainEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.23.1
A row in the broadcast domain table
Column Syntax OID
ipNewCfgBootpBcastDomainIndexThe index of the broadcast domain entrySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.23.1.1
ipNewCfgBootpBcastDomainVlanThe VLAN of the broadcast domain entrySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.23.1.2
ipNewCfgBootpBcastDomainEnableThe state of the broadcast domain entryEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.8.23.1.3
ipNewCfgBootpBcastDomainActionWhen set to the value of 2 (delete), the broadcast domain is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of broadcast domain.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.8.23.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.8.24 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpBcastDomainServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgBootpBcastDomainServerTable'
The table of broadcast domain servers
ipCurCfgBootpBcastDomainServerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.24.1
A row in the broadcast domain server table
Column Syntax OID
ipCurCfgBootpBcastDomainBDIndexThe index of the broadcast domain entry in the server tableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.24.1.1
ipCurCfgBootpBcastDomainServIndexThe index of the server in the server tableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.24.1.2
ipCurCfgBootpBcastDomainServerIPThe current broadcast domain server IP.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.8.24.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.8.25 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpBcastDomainServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgBootpBcastDomainServerTable'
The table of broadcast domain servers
ipNewCfgBootpBcastDomainServerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.8.25.1
A row in the broadcast domain server table
Column Syntax OID
ipNewCfgBootpBcastDomainBDIndexThe index of the broadcast domain entry in the server tableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.25.1.1
ipNewCfgBootpBcastDomainServIndexThe index of the server in the server tableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.8.25.1.2
ipNewCfgBootpBcastDomainServerIPThe current broadcast domain server IP.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.8.25.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.10.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgNwfTable'
The table of IP network filter in the current configuration block.
ipCurCfgNwfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.10.2.1
Information about an IP network filter.
Column Syntax OID
ipCurCfgNwfIndexThe netowrk filter number for which the NWF is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.10.2.1.1
ipCurCfgNwfAddrThe IP address of the network filter.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.10.2.1.2
ipCurCfgNwfMaskThe IP network filter mask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.10.2.1.3
ipCurCfgNwfStateEnable or disable the network filter.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.10.2.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgNwfTable'
The table of IP network filter in the current configuration block.
ipNewCfgNwfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1
Information about an IP network filter.
Column Syntax OID
ipNewCfgNwfIndexThe netowrk filter number for which the NWF is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1.1
ipNewCfgNwfAddrThe IP address of the network filter.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1.2
ipNewCfgNwfMaskThe IP network filter mask.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1.3
ipNewCfgNwfStateEnable or disable the network filter.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1.4
ipNewCfgNwfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.10.3.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgRmapTable'
The table of IP route map in the current configuration block.
ipCurCfgRmapEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1
Information about an IP route map.
Column Syntax OID
ipCurCfgRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.1
ipCurCfgRmapLpThe local-preference of the route map. 4294967295 means noneUnsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.2
ipCurCfgRmapMetricThe metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.3
ipCurCfgRmapPrecThe precedence of the route map.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.4
ipCurCfgRmapWeightThe weight of the route map. 65535 means noneInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.5
ipCurCfgRmapStateEnable or disable the route map.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.6
ipCurCfgRmapApThe as-path prepend of the matched route. Up to 32 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>] ...
OctetString
Constraints:
range: 0-191
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.7
ipCurCfgRmapMetricTypeThe OSPF metric-type of the matched route.Enumeration
Enumerated Values:
1none
2type1
3type2
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.8
ipCurCfgRmapNexthopPeer address as nexthop of the matched route(only for BGP).Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.2.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgRmapTable'
The table of IP route map in the new configuration block.
ipNewCfgRmapEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1
Information about an IP route map.
Column Syntax OID
ipNewCfgRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.1
ipNewCfgRmapLpThe local-preference of the route map. 4294967295 means noneUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.2
ipNewCfgRmapMetricThe metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.
Unsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.3
ipNewCfgRmapPrecThe precedence of the route map.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.4
ipNewCfgRmapWeightThe weight of the route map. 65535 means noneInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.5
ipNewCfgRmapStateEnable or disable the route map.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.6
ipNewCfgRmapApThe as-path prepend of the matched route. Up to 32 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>] ...
OctetStringr/w
Constraints:
range: 0-191
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.7
ipNewCfgRmapMetricTypeThe OSPF metric-type of the matched route.Enumerationr/w
Enumerated Values:
1none
2type1
3type2
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.8
ipNewCfgRmapDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.9
ipNewCfgRmapNexthopPeer address as nexthop of the matched route(only for BGP).Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.3.1.10
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgAlistTable'
The table of IP route map access list in the current configuration 
block.
ipCurCfgAlistEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1
Information about an IP route map.
Column Syntax OID
ipCurCfgAlistRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.1
ipCurCfgAlistIndexThe access list number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.2
ipCurCfgAlistNwfThe network filter number of the route map access list.
0 means none
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.3
ipCurCfgAlistMetricThe metric of the route map access list. 4294967295 means noneUnsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.4
ipCurCfgAlistActionAction of the route map access list.Enumeration
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.5
ipCurCfgAlistStateEnable or disable the route map access list.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.5.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgAlistTable'
The table of IP route map access list in the current configuration
block.
ipNewCfgAlistEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1
Information about an IP route map.
Column Syntax OID
ipNewCfgAlistRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.1
ipNewCfgAlistIndexThe access list number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.2
ipNewCfgAlistNwfThe network filter number of the route map access list.
0 means none
Integer32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.3
ipNewCfgAlistMetricThe metric of the route map access list. 4294967295 means noneUnsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.4
ipNewCfgAlistActionAction of the route map access list.Enumerationr/w
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.5
ipNewCfgAlistStateEnable or disable the route map access list.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.6
ipNewCfgAlistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.11.6.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgAspathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgAspathTable'
The table of IP route map access path configuration.
ipCurCfgAspathEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1
Information about an IP route map.
Column Syntax OID
ipCurCfgAspathRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1.1
ipCurCfgAspathIndexThe access path number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1.2
ipCurCfgAspathASThe AS number of the route map access path.
0 means none
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1.3
ipCurCfgAspathActionAction of the route map access path.Enumeration
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1.4
ipCurCfgAspathStateEnable or disable the route map access path.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.8.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgAspathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgAspathTable'
The table of IP route map access path configuration
ipNewCfgAspathEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1
Information about an IP route map.
Column Syntax OID
ipNewCfgAspathRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.1
ipNewCfgAspathIndexThe access path number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.2
ipNewCfgAspathASThe AS number of the route map access path.
0 means none
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.3
ipNewCfgAspathActionAction of the route map access path.Enumerationr/w
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.4
ipNewCfgAspathStateEnable or disable the route map access path.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.5
ipNewCfgAspathDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.11.9.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3 · 1 row entry · 25 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpCurCfgPeerTable'
The table of BGP peer in the current configuration block.
bgpCurCfgPeerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1
Information about a BGP peer.
Column Syntax OID
bgpCurCfgPeerIndexThe BGP peer number for which the BGP peer table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.1
bgpCurCfgPeerRemoteAddrThe remote IP address of the BGP peer.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.2
bgpCurCfgPeerRemoteAsThe remote AS number of the BGP peer. 0 means noneInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.3
bgpCurCfgPeerTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.4
bgpCurCfgPeerStateEnable or disable the peer.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.5
bgpCurCfgPeerMetricThe metric value of the BGP peer. A value of '0' means noneUnsigned32
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.10
bgpCurCfgPeerDefaultActionThe value of default route action.Enumeration
Enumerated Values:
1none
2import
3originate
4redistribute
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.11
bgpCurCfgPeerOspfStateEnable or disable advertising OSPF routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.12
bgpCurCfgPeerFixedStateEnable or disable advertising fixed routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.13
bgpCurCfgPeerStaticStateEnable or disable advertising static routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.14
bgpCurCfgPeerInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.16
bgpCurCfgPeerOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
||…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.17
bgpCurCfgPeerHoldThe hold timeInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.18
bgpCurCfgPeerAliveThe keep alive timeInteger32
Constraints:
range: 0-21845
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.19
bgpCurCfgPeerAdvertThe min time between advertisementsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.20
bgpCurCfgPeerRetryThe connect retry intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.21
bgpCurCfgPeerOrigThe min time between route originationsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.22
bgpCurCfgPeerRipStateEnable/disable advertising RIP routesEnumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.23
bgpCurCfgPeerPasswordPeer BGP passwordOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.24
bgpCurCfgPeerPassiveEnable/disable BGP passive peerEnumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.25
bgpCurCfgPeerUpdateSrcIfBGP peer update source interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.30
bgpCurCfgPeerUpdateSrcLoopIfBGP peer update source loopback interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.31
bgpCurCfgPeerTtlSecHopsThe BGP ttl security hops. 0 means none.Integer32
Constraints:
range: 0-254
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.32
bgpCurCfgPeerNexthopSelfEnable/Disable using this router as next-hop in BGP updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.33
bgpCurCfgPeerClientEnable/disable BGP client peerEnumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.3.1.34
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4 · 1 row entry · 30 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpNewCfgPeerTable'
The table of BGP peer in the new configuration block.
bgpNewCfgPeerEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1
Information about a BGP peer.
Column Syntax OID
bgpNewCfgPeerIndexThe BGP peer number for which the BGP peer table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.1
bgpNewCfgPeerRemoteAddrThe remote IP address of the BGP peer.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.2
bgpNewCfgPeerRemoteAsThe remote AS number of the BGP peer. 0 means noneInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.3
bgpNewCfgPeerTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.4
bgpNewCfgPeerStateEnable or disable the peer.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.5
bgpNewCfgPeerDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.6
bgpNewCfgPeerMetricThe metric value of the BGP peer. A value of '0' means noneUnsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.10
bgpNewCfgPeerDefaultActionThe value of default route action.Enumerationr/w
Enumerated Values:
1none
2import
3originate
4redistribute
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.11
bgpNewCfgPeerOspfStateEnable or disable advertising OSPF routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.12
bgpNewCfgPeerFixedStateEnable or disable advertising fixed routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.13
bgpNewCfgPeerStaticStateEnable or disable advertising static routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.14
bgpNewCfgPeerInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.16
bgpNewCfgPeerOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
||…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.17
bgpNewCfgPeerAddInRmapThe route map to be add into in-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.18
bgpNewCfgPeerAddOutRmapThe route map to be add into out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.19
bgpNewCfgPeerRemoveInRmapThe route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.20
bgpNewCfgPeerRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.21
bgpNewCfgPeerHoldThe hold timeInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.22
bgpNewCfgPeerAliveThe keep alive timeInteger32r/w
Constraints:
range: 0-21845
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.23
bgpNewCfgPeerAdvertThe min time between advertisementsInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.24
bgpNewCfgPeerRetryThe connect retry intervalInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.25
bgpNewCfgPeerOrigThe min time between route originationsInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.26
bgpNewCfgPeerRipStateEnable/disable advertising RIP routesEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.27
bgpNewCfgPeerPasswordPeer BGP passwordOctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.28
bgpNewCfgPeerPassiveEnable/disable BGP passive peerEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.29
bgpNewCfgPeerUpdateSrcIfBGP peer update source interface indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.30
bgpNewCfgPeerUpdateSrcLoopIfBGP peer update source loopback interface indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.31
bgpNewCfgPeerTtlSecHopsThe BGP ttl security hops. 0 means none.Integer32r/w
Constraints:
range: 0-254
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.32
bgpNewCfgPeerNexthopSelfEnable/Disable using this router as next-hop in BGP updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.33
bgpNewCfgPeerClientEnable/disable BGP client peerEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.4.1.34
.1.3.6.1.4.1.20301.2.7.16.3.1.12.6 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpCurCfgAggrTable'
The table of BGP aggregation configuration.
bgpCurCfgAggrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.6.1
Information about a BGP aggregation.
Column Syntax OID
bgpCurCfgAggrIndexThe aggregation number for which the BGP aggregation is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.6.1.1
bgpCurCfgAggrAddrThe IP address of the BGP aggregation.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.6.1.2
bgpCurCfgAggrMaskThe subnet mask of the BGP aggregation.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.6.1.3
bgpCurCfgAggrStateEnable or disable the BGP aggregation.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.6.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpNewCfgAggrTable'
The table of BGP aggregation configuration.
bgpNewCfgAggrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1
Information about an BGP aggregation.
Column Syntax OID
bgpNewCfgAggrIndexThe aggregation number for which the BGP aggregation is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1.1
bgpNewCfgAggrAddrThe IP address of the BGP aggregation.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1.2
bgpNewCfgAggrMaskThe subnet mask of the BGP aggregation.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1.3
bgpNewCfgAggrStateEnable or disable the BGP aggregation.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1.4
bgpNewCfgAggrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.12.7.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9 · 1 row entry · 25 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpCurCfgGroupTable'
The table of BGP group in the current configuration block.
bgpCurCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1
Information about a BGP group.
Column Syntax OID
bgpCurCfgGroupIndexThe BGP group number for which the BGP group table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.1
bgpCurCfgGroupNameThe group name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.2
bgpCurCfgGroupRemoteAddrThe IP address of the BGP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.3
bgpCurCfgGroupRemoteMaskThe subnet mask of the BGP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.4
bgpCurCfgGroupLimitThe maximum number of BGP dynamic peers.Integer32
Constraints:
range: 1-96
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.5
bgpCurCfgGroupUpdateSrcIfBGP group update source interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.6
bgpCurCfgGroupUpdateSrcLoopIfBGP group update source loopback interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.7
bgpCurCfgGroupHoldThe hold timeInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.8
bgpCurCfgGroupAliveThe keep alive timeInteger32
Constraints:
range: 0-21845
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.9
bgpCurCfgGroupAdvertThe min time between advertisementsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.10
bgpCurCfgGroupOrigThe min time between route originationsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.11
bgpCurCfgGroupMetricThe metric value of the BGP group. A value of '0' means noneUnsigned32
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.12
bgpCurCfgGroupTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.13
bgpCurCfgGroupDefaultActionThe value of default route action.Enumeration
Enumerated Values:
1none
2import
3originate
4redistribute
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.14
bgpCurCfgGroupOspfStateEnable or disable advertising OSPF routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.15
bgpCurCfgGroupRipStateEnable/disable advertising RIP routesEnumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.16
bgpCurCfgGroupFixedStateEnable or disable advertising fixed routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.17
bgpCurCfgGroupStaticStateEnable or disable advertising static routes.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.18
bgpCurCfgGroupInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.19
bgpCurCfgGroupOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.20
bgpCurCfgGroupPasswordPeer BGP passwordOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.21
bgpCurCfgGroupStateEnable or disable the group.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.22
bgpCurCfgGroupTtlSecHopsThe BGP ttl security hops. 0 means none.Integer32
Constraints:
range: 0-254
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.23
bgpCurCfgGroupNexthopSelfEnable/Disable using this router as next-hop in BGP updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.24
bgpCurCfgGroupClientEnable/Disable Route Reflector for this client.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.9.1.25
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10 · 1 row entry · 30 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpNewCfgGroupTable'
The table of BGP group in the new configuration block.
bgpNewCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1
Information about a BGP group.
Column Syntax OID
bgpNewCfgGroupIndexThe BGP group number for which the BGP group table is related.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.1
bgpNewCfgGroupNameThe group name.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.2
bgpNewCfgGroupRemoteAddrThe IP address of the BGP group.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.3
bgpNewCfgGroupRemoteMaskThe subnet mask of the BGP group.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.4
bgpNewCfgGroupLimitThe maximum number of BGP dynamic peers.Integer32r/w
Constraints:
range: 1-96
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.5
bgpNewCfgGroupUpdateSrcIfBGP group update source interface indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.6
bgpNewCfgGroupUpdateSrcLoopIfBGP group update source loopback interface indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.7
bgpNewCfgGroupHoldThe hold timeInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.8
bgpNewCfgGroupAliveThe keep alive timeInteger32r/w
Constraints:
range: 0-21845
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.9
bgpNewCfgGroupAdvertThe min time between advertisementsInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.10
bgpNewCfgGroupOrigThe min time between route originationsInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.11
bgpNewCfgGroupMetricThe metric value of the BGP group. A value of '0' means noneUnsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.12
bgpNewCfgGroupTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.13
bgpNewCfgGroupDefaultActionThe value of default route action.Enumerationr/w
Enumerated Values:
1none
2import
3originate
4redistribute
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.14
bgpNewCfgGroupOspfStateEnable or disable advertising OSPF routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.15
bgpNewCfgGroupRipStateEnable/disable advertising RIP routesEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.16
bgpNewCfgGroupFixedStateEnable or disable advertising fixed routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.17
bgpNewCfgGroupStaticStateEnable or disable advertising static routes.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.18
bgpNewCfgGroupInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.19
bgpNewCfgGroupOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.20
bgpNewCfgGroupAddInRmapThe route map to be add into in-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.21
bgpNewCfgGroupAddOutRmapThe route map to be add into out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.22
bgpNewCfgGroupRemoveInRmapThe route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.23
bgpNewCfgGroupRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.24
bgpNewCfgGroupPasswordPeer BGP passwordOctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.25
bgpNewCfgGroupDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.26
bgpNewCfgGroupStateEnable or disable the group.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.27
bgpNewCfgGroupTtlSecHopsThe BGP ttl security hops. 0 means none.Integer32r/w
Constraints:
range: 0-254
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.28
bgpNewCfgGroupNexthopSelfEnable/Disable using this router as next-hop in BGP updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.29
bgpNewCfgGroupClientEnable/Disable Route Reflector for this client.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.12.10.1.30
.1.3.6.1.4.1.20301.2.7.16.3.1.12.11 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpCurCfgGroupRASTable'
The table of BGP group RASs in the current configuration block.
bgpCurCfgGroupRASEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.11.1
Information about a BGP group RAS.
Column Syntax OID
bgpCurCfgGroupRASIndexThe BGP remote-as number for which the BGP RAS table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.11.1.1
bgpCurCfgGroupRASThe remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means noneInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.11.1.2
.1.3.6.1.4.1.20301.2.7.16.3.1.12.12 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpNewCfgGroupRASTable'
The table of BGP group RASs in the new configuration block.
bgpNewCfgGroupRASEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.12.12.1
Information about a BGP group RAS.
Column Syntax OID
bgpNewCfgGroupRASIndexThe BGP group RAS number for which the BGP group RASs table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.12.12.1.1
bgpNewCfgGroupRASThe remote AS number of the BGP group bgpNewCfgGroupIndex. 0 means noneInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.12.12.1.2
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgAreaTable'
The table of OSPF area in the current configuration block.
ospfCurCfgAreaEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1
Information about a OSPF area.
Column Syntax OID
ospfCurCfgAreaIndexThe OSPF area number for which the OSPF area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.1
ospfCurCfgAreaIdThe IP Address of the OSPF area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.2
ospfCurCfgAreaSpfIntervalThe SPF interval for the OSPF area.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.3
ospfCurCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
message-digest(3) - use message-digest authentication.
Enumeration
Enumerated Values:
1none
2password
3message-digest
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.4
ospfCurCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)
Enumeration
Enumerated Values:
0transit
1stub
2nssa
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.5
ospfCurCfgAreaMetricMetric (1-65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.6
ospfCurCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.2.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgAreaTable'
The table of OSPF area in the new configuration block.
ospfNewCfgAreaEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1
Information about a OSPF area.
Column Syntax OID
ospfNewCfgAreaIndexThe OSPF area number for which the OSPF area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.1
ospfNewCfgAreaIdThe IP Address of the OSPF area.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.2
ospfNewCfgAreaSpfIntervalThe SPF interval for the OSPF area.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.3
ospfNewCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password.
message-digest(3) - use message-digest authentication.
Enumerationr/w
Enumerated Values:
1none
2password
3message-digest
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.4
ospfNewCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)
Enumerationr/w
Enumerated Values:
0transit
1stub
2nssa
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.5
ospfNewCfgAreaMetricMetric (1-65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.6
ospfNewCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.7
ospfNewCfgAreaDeleteDelete the area
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.20301.2.7.16.3.1.13.3.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.13.5 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgMdkeyTable'
The table of OSPF MD5/SHA256 keys in the current configuration block.
ospfCurCfgMdkeyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.5.1
Information about an OSPF MD keys table.
Column Syntax OID
ospfCurCfgMdkeyIndexThe OSPF MD5/SHA256 Key number for which the OSPF MdKey table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.5.1.1
ospfCurCfgMdkeyKeyThe character string for MD5 and SHA256 key. The maximum size for MD5 is 16 and for SHA256 is 32.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.3.1.13.5.1.2
ospfCurCfgMdkeyTypeThe OSPF MD key type, 0:MD5, 1:SHA256.Enumeration
Enumerated Values:
0md5
1sha256
.1.3.6.1.4.1.20301.2.7.16.3.1.13.5.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.13.6 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgMdkeyTable'
The table of OSPF MD5/SHA256 keys in the new configuration block.
ospfNewCfgMdkeyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.6.1
Information about an OSPF MD keys table.
Column Syntax OID
ospfNewCfgMdkeyIndexThe OSPF MD5/SHA256 Key number for which the OSPF MdKey table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.6.1.1
ospfNewCfgMdkeyKeyThe character string for MD5 and SHA256 key. The maximum size for MD5 is 16 and for SHA256 is 32.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.3.1.13.6.1.2
ospfNewCfgMdkeyDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.13.6.1.3
ospfNewCfgMdkeyTypeThe OSPF MD key type, 0:MD5, 1:SHA256.Enumerationr/w
Enumerated Values:
0md5
1sha256
.1.3.6.1.4.1.20301.2.7.16.3.1.13.6.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7 · 1 row entry · 15 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgIntfTable'
The table of OSPF Interface in the current configuration block.
ospfCurCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1
Information about an OSPF Interface.
Column Syntax OID
ospfCurCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.1
ospfCurCfgIntfAreaThe index of the area that the interface belongs (0..2)Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.2
ospfCurCfgIntfMdkeyThe MD5/SHA256 key for the OSPF interface
0 (none) no MD5/SHA256 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.3
ospfCurCfgIntfCostInterface costInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.4
ospfCurCfgIntfPrioInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.5
ospfCurCfgIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.6
ospfCurCfgIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.7
ospfCurCfgIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.8
ospfCurCfgIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.9
ospfCurCfgIntfTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.10
ospfCurCfgIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.11
ospfCurCfgIntfAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.12
ospfCurCfgIntfPassivePassive interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.13
ospfCurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.14
ospfCurCfgIntfPtopPoint-to-point interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.7.1.15
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8 · 1 row entry · 16 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgIntfTable'
The table of OSPF interface in the new configuration block.
ospfNewCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1
Information about an OSPF interface.
Column Syntax OID
ospfNewCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.1
ospfNewCfgIntfAreaThe index of the area that the interface belongsInteger32r/w
Constraints:
range: 0-19
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.2
ospfNewCfgIntfMdkeyThe MD5/SHA256 key for the OSPF interface
0 (none) no MD5/SHA256 authentication.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.3
ospfNewCfgIntfCostInterface cost(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.4
ospfNewCfgIntfPrioInterface router priority(0..255)Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.5
ospfNewCfgIntfHelloHello interval(1..65535s | 50..65535ms)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.6
ospfNewCfgIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.7
ospfNewCfgIntfDeadDead interval(1..65535s |1000..65535ms)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.8
ospfNewCfgIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.9
ospfNewCfgIntfTransTransit delay(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.10
ospfNewCfgIntfRetraRetransmit interval(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.11
ospfNewCfgIntfAuthKeyAuthentication KeyOctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.12
ospfNewCfgIntfPassivePassive interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.13
ospfNewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.14
ospfNewCfgIntfDeleteDelete the interface
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.15
ospfNewCfgIntfPtopPoint-to-point interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.8.1.16
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgVirtIntfTable'
The table of OSPF Virtual Interface configuration in the current 
configuration.
ospfCurCfgVirtIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1
Information about an OSPF virtual Interface.
Column Syntax OID
ospfCurCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.1
ospfCurCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-19
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.2
ospfCurCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.3
ospfCurCfgVirtIntfMdkeyThe MD5/SHA256 key for the OSPF virtual interface
0 (none) no MD5/SHA256 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.4
ospfCurCfgVirtIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.5
ospfCurCfgVirtIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.6
ospfCurCfgVirtIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.7
ospfCurCfgVirtIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.8
ospfCurCfgVirtIntfTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.9
ospfCurCfgVirtIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.10
ospfCurCfgVirtIntfAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.11
ospfCurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.9.1.12
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgVirtIntfTable'
The table of OSPF Virtual interface in the new configuration block.
ospfNewCfgVirtIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1
Information about an OSPF virtual interface.
Column Syntax OID
ospfNewCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.1
ospfNewCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.
Integer32r/w
Constraints:
range: 0-19
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.2
ospfNewCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.3
ospfNewCfgVirtIntfMdkeyThe MD5/SHA256 key for the OSPF virtual interface
0 (none) no MD5/SHA256 authentication.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.4
ospfNewCfgVirtIntfHelloHello interval(1..65535s | 50..65535ms)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.5
ospfNewCfgVirtIntfHelloMSUnits of time measurement fo Hello interval
seconds(0),
milliseconds(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.6
ospfNewCfgVirtIntfDeadDead interval(1..65535s | 1000..65535ms)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.7
ospfNewCfgVirtIntfDeadMSUnits of time measurement fo Dead interval
seconds(0),
milliseconds(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.8
ospfNewCfgVirtIntfTransTransit delay(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.9
ospfNewCfgVirtIntfRetraRetransmit interval(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.10
ospfNewCfgVirtIntfAuthKeyAuthentication Key SIZE(0..8)OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.11
ospfNewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.12
ospfNewCfgVirtIntfDeleteDelete
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.3.1.13.10.1.13
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgHostTable'
The table of OSPF Host configuration.
ospfCurCfgHostEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1
Information about a OSPF host.
Column Syntax OID
ospfCurCfgHostIndexThe OSPF host number for which the OSPF host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1.1
ospfCurCfgHostIpAddrThe IP Address of the OSPF host.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1.2
ospfCurCfgHostAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1.3
ospfCurCfgHostCostThe cost of the OSPF host.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1.4
ospfCurCfgHostStateEnable or disable an OSPF HostEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.12.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgHostTable'
The table of OSPF Host configuration.
ospfNewCfgHostEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1
Information about a OSPF host.
Column Syntax OID
ospfNewCfgHostIndexThe OSPF host number for which the OSPF host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.1
ospfNewCfgHostIpAddrThe IP Address of the OSPF host.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.2
ospfNewCfgHostAreaIndexThe OSPF area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.3
ospfNewCfgHostCostThe cost of the OSPF host.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.4
ospfNewCfgHostStateEnable or disable an OSPF HostEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.5
ospfNewCfgHostDeleteDelete the OSPF host:
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.20301.2.7.16.3.1.13.13.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgRangeTable'
The table of OSPF summary range in the current configuration.
ospfCurCfgRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1
Information about an OSPF summary range.
Column Syntax OID
ospfCurCfgRangeIndexThe range number for which the OSPF summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.1
ospfCurCfgRangeAddrThe IP Address of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.2
ospfCurCfgRangeMaskThe mask of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.3
ospfCurCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.4
ospfCurCfgRangeHideStateThe state of the hide range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.5
ospfCurCfgRangeStateThe state of the range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.14.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgRangeTable'
The table of OSPF summary range in the new configuration.
ospfNewCfgRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1
Information about an OSPF summary range.
Column Syntax OID
ospfNewCfgRangeIndexThe range number for which the OSPF summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.1
ospfNewCfgRangeAddrThe IP Address of the range.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.2
ospfNewCfgRangeMaskThe mask of the range.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.3
ospfNewCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.4
ospfNewCfgRangeHideStateThe state of the hide range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.5
ospfNewCfgRangeStateThe state of the range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.6
ospfNewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.13.15.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.13.20 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgLoopIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfCurCfgLoopIfTable'
The table of OSPF Loopback Interfaces 
in the current configuration block.
ospfCurCfgLoopIfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.20.1
Information about an OSPF Loopback Interface.
Column Syntax OID
ospfCurCfgLoopIfIndexThe OSPF Loopback Interface number for which
the OSPF Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.20.1.1
ospfCurCfgLoopIfAreaThe index of the area that the loopback interface belongsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.20.1.2
ospfCurCfgLoopIfStatusStatus of the loopback interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.20.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.13.21 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgLoopIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfNewCfgLoopIfTable'
The table of OSPF loopback interface in the new configuration block.
ospfNewCfgLoopIfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.13.21.1
Information about an OSPF loopback interface.
Column Syntax OID
ospfNewCfgLoopIfIndexThe OSPF loopback interface number for which
the OSPF Loopback Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.13.21.1.1
ospfNewCfgLoopIfAreaThe index of the area that the loopback interface belongs (0..2)Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.13.21.1.2
ospfNewCfgLoopIfStatusStatus of the loopback interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.13.21.1.3
ospfNewCfgLoopIfDeleteDelete the loopback interface
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.3.1.13.21.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgStaticArpTable'
The table of static ARPs in the current configuration block.
ipCurCfgStaticArpEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1
A row in the static ARP table
Column Syntax OID
ipCurCfgStaticArpIndxThe index of the static ARP table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.1
ipCurCfgStaticArpIpThe IP address for the ARP entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.2
ipCurCfgStaticArpMACThe MAC address for the ARP entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.3
ipCurCfgStaticArpVlanThe VLAN for the ARP entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.4
ipCurCfgStaticArpPortIndexThe port or any of one of the trunk port for the ARP entry.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.5
ipCurCfgStaticArpPortAliasThe port alias or any of one of the trunk port for the ARP entry..SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.15.2.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgStaticArpTable'
The table of static ARPs in the new configuration block.
ipNewCfgStaticArpEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1
A row in the static ARP table
Column Syntax OID
ipNewCfgStaticArpIndxThe index of the static ARP table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.1
ipNewCfgStaticArpIpThe IP address for the ARP entry.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.2
ipNewCfgStaticArpMACThe MAC address for the ARP entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.3
ipNewCfgStaticArpVlanThe VLAN for the ARP entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.4
ipNewCfgStaticArpPortIndexThe port or any one of the trunk port for the ARP entry.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.5
ipNewCfgStaticArpActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.6
ipNewCfgStaticArpPortAliasThe alias of the port for the ARP entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.15.3.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ripCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ripCurCfgIntfTable'
The table of RIP on IP interface in the current configuration block.
ripCurCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1
Information about RIP on IP interface.
Column Syntax OID
ripCurCfgIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.1
ripCurCfgIntfVersionRIP version.Enumeration
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.2
ripCurCfgIntfStateEnable or disable RIP protocol.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.3
ripCurCfgIntfListenEnable or disable listening to route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.4
ripCurCfgIntfTrigUpdateEnable or disable triggered updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.6
ripCurCfgIntfMcastUpdateEnable or disable multicast updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.7
ripCurCfgIntfPoisonReverseRIP poison reverse.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.8
ripCurCfgIntfSupplyEnable or disable supplying route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.9
ripCurCfgIntfMetricRIP route metric for this interface.Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.10
ripCurCfgIntfAuthThe type of Authentication used on this interface.Enumeration
Enumerated Values:
1none
2password
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.11
ripCurCfgIntfKeyRIP update authentication password.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.12
ripCurCfgIntfDefaultSpecifies what RIP does with default routes.Enumeration
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.13
ripCurCfgIntfSplitHorizonRIP split horizon.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.1.1.14
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ripNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ripNewCfgIntfTable'
The table of RIP on IP interface in the new configuration block.
ripNewCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1
Information about RIP on IP interface.
Column Syntax OID
ripNewCfgIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.1
ripNewCfgIntfVersionRIP version.Enumerationr/w
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.2
ripNewCfgIntfSupplyEnable or disable supplying route updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.3
ripNewCfgIntfListenEnable or disable listening to route updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.4
ripNewCfgIntfTrigUpdateEnable or disable triggered updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.6
ripNewCfgIntfMcastUpdateEnable or disable multicast updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.7
ripNewCfgIntfPoisonReverseRIP poison reverse.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.8
ripNewCfgIntfStateEnable or disable RIP protocol.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.9
ripNewCfgIntfMetricRIP route metric for this interface.Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.10
ripNewCfgIntfAuthThe type of Authentication used on this interface.Enumerationr/w
Enumerated Values:
1none
2password
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.11
ripNewCfgIntfKeyRIP update authentication password.OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.12
ripNewCfgIntfDefaultSpecifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none.
Enumerationr/w
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.13
ripNewCfgIntfSplitHorizonRIP split horizon.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.18.2.1.14
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpStaticMrtrCurCfgTable'
The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1
A row in the Static Multicast Router table.
Column Syntax OID
igmpStaticMrtrCurCfgIndxThe IGMP Multicast Router table port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1.1
igmpStaticMrtrCurCfgPortIdThe IGMP Multicast Router port in the current configuration block.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1.2
igmpStaticMrtrCurCfgVlanIdThe IGMP Multicast Router port in the current configuration block.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1.3
igmpStaticMrtrCurCfgVersionThe IGMP version of the IGMP Static Multicast Router.Enumeration
Enumerated Values:
1version1
2version2
3version3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1.4
igmpStaticMrtrCurCfgPortAliasThe IGMP Multicast Router port alias in the current configuration block.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.1.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpStaticMrtrNewCfgTable'
The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1
A row in the Static Multicast Router table.
Column Syntax OID
igmpStaticMrtrNewCfgIndxThe IGMP Multicast Router table port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.1
igmpStaticMrtrNewCfgPortIdThe IGMP Multicast Router port in the new configuration block.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.2
igmpStaticMrtrNewCfgVlanIdThe IGMP Multicast Router port in the new configuration block.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.3
igmpStaticMrtrNewCfgVersionThe IGMP version of the IGMP Static Multicast Router.Enumerationr/w
Enumerated Values:
1version1
2version2
3version3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.4
igmpStaticMrtrNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.5
igmpStaticMrtrNewCfgPortAliasThe IGMP Multicast Router port alias in the new configuration block.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.19.10.2.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpFltCurCfgTable'
The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1
A row in the filtering table.
Column Syntax OID
igmpFltCurCfgIndxThe IGMP filter table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1.1
igmpFltCurCfgMcastIp1Range1 Multicast IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1.2
igmpFltCurCfgMcastIp2Range2 Multicast IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1.3
igmpFltCurCfgActionThe action for the IGMP filtering rule.Enumeration
Enumerated Values:
1allow
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1.4
igmpFltCurCfgStateThe state of this IGMP filtering rule.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.1.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpFltNewCfgTable'
The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1
A row in the filtering table.
Column Syntax OID
igmpFltNewCfgIndxThe IGMP filter table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.1
igmpFltNewCfgMcastIp1Range1 Multicast source IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.2
igmpFltNewCfgMcastIp2Range2 Multicast source IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.3
igmpFltNewCfgActionThe action for the IGMP filtering rule.Enumerationr/w
Enumerated Values:
1allow
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.4
igmpFltNewCfgStateThe state of this IGMP filtering rule.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.5
igmpFltNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.2.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpFltCurCfgPortTable'
The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3.1
A row in the IGMP filtering port table.
Column Syntax OID
igmpFltCurCfgPortIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3.1.1
igmpFltCurCfgPortStateEnable or disable IGMP filtering.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3.1.2
igmpFltCurCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ …
OctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3.1.3
igmpFltCurCfgPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.3.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpFltNewCfgPortTable'
The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1
A row in the IGMP filtering port table.
Column Syntax OID
igmpFltNewCfgPortIndxThe port index.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.1
igmpFltNewCfgPortStateEnable or disable IGMP filtering.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.2
igmpFltNewCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ f…
OctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.3
igmpFltNewCfgPortAddFiltRuleThis is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is betw…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.4
igmpFltNewCfgPortRemFiltRuleThis is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid inde…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.5
igmpFltNewCfgPortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.19.11.4.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpRelayMrtrCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpRelayMrtrCurCfgTable'
The IGMP relay multicast router table in the
current configuration block.
igmpRelayMrtrCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1
A row in the IGMP relay multicast router table.
Column Syntax OID
igmpRelayMrtrCurCfgIndxThe IGMP relay multicast router table index.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.1
igmpRelayMrtrCurCfgAddrThe IP address of the multicast router.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.2
igmpRelayMrtrCurCfgEnaDisThe status of the multicast router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.3
igmpRelayMrtrCurCfgIntervalThe interval between ping attempts.Integer32
Constraints:
range: 1-60
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.4
igmpRelayMrtrCurCfgRetryThe number of failed attempts to declare router DOWN.Integer32
Constraints:
range: 1-120
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.5
igmpRelayMrtrCurCfgRestrThe number of successful attempts to declare router UP.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.6
igmpRelayMrtrCurCfgVersionThe IGMP version.Enumeration
Enumerated Values:
1igmpv1
2igmpv2
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.10.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpRelayMrtrNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpRelayMrtrNewCfgTable'
The IGMP relay multicast router table in the
new configuration block.
igmpRelayMrtrNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1
A row in the IGMP relay multicast router table.
Column Syntax OID
igmpRelayMrtrNewCfgIndxThe IGMP relay multicast router table index.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.1
igmpRelayMrtrNewCfgAddrThe IP address of the multicast router.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.2
igmpRelayMrtrNewCfgEnaDisThe status of the multicast router.Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.3
igmpRelayMrtrNewCfgIntervalThe interval between ping attempts.Integer32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.4
igmpRelayMrtrNewCfgRetryThe number of failed attempts to declare router DOWN.Integer32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.5
igmpRelayMrtrNewCfgRestrThe number of successful attempts to declare router UP.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.6
igmpRelayMrtrNewCfgVersionThe IGMP version.Enumerationr/w
Enumerated Values:
1igmpv1
2igmpv2
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.7
igmpRelayMrtrNewCfgRemoveDelete the IGMP Relay multicast router.Enumerationr/w
Enumerated Values:
1clear
2ok
.1.3.6.1.4.1.20301.2.7.16.3.1.19.12.11.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15 · 1 row entry · 15 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpCurQurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpCurQurCfgTable'
The table of IGMP querier configuration.
igmpCurQurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1
A row in the IGMP querier configuration table
Column Syntax OID
igmpCurQurCfgVlanIndexThe vlan number for which the IGMP querier information is related.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.1
igmpCurQuerierStateIndicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any othe…
Enumeration
Enumerated Values:
1querier
2nonQuerier
3checkingMembership
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.2
igmpCurCfgQuerierThe snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the swit…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.3
igmpCurCfgQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.
Integer32
Constraints:
range: 1-608
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.4
igmpCurCfgQurSrcIpThe source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.5
igmpCurCfgElectionTypeThe querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.
Enumeration
Enumerated Values:
1ipv4
2macaddr
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.6
igmpCurCfgQurRobustnessThe Robustness Variable allows tuning for the Other
Querier Present Interval.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.7
igmpCurCfgQurStartupCntRepresents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.8
igmpCurCfgQurStartupIntThis variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
Integer32
Constraints:
range: 1-608
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.9
igmpCurCfgQurMaxRespTimeThe maximum query response interval advertised in
IGMP queries on this VLAN.
Integer32
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.10
igmpCurCfgOtherQurAddressThe IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.11
igmpCurCfgOtherQurPresentIntThe Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) time…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.12
igmpCurCfgVlanOperVersionIndicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
should be configured on the bas…
Enumeration
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.13
igmpCurVlanOperVersionIndicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).
Enumeration
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.14
igmpCurVlanOlderVerTimerIndicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.15.1.15
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16 · 1 row entry · 16 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpNewQurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpNewQurCfgTable'
The table of IGMP querier configuration.
igmpNewQurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1
A row in the IGMP querier configuration table
Column Syntax OID
igmpNewQurCfgVlanIndexThe vlan number for which the IGMP querier information is related.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.1
igmpNewQuerierStateIndicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any othe…
Enumeration
Enumerated Values:
1querier
2nonQuerier
3checkingMembership
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.2
igmpNewCfgQuerierThe snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the swit…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.3
igmpNewCfgQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.
Integer32r/w
Constraints:
range: 1-608
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.4
igmpNewCfgQurSrcIpThe source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.5
igmpNewCfgElectionTypeThe querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.
Enumerationr/w
Enumerated Values:
1ipv4
2macaddr
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.6
igmpNewCfgQurRobustnessThe Robustness Variable allows tuning for the Other
Querier Present Interval.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.7
igmpNewCfgQurStartupCntRepresents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.8
igmpNewCfgQurStartupIntThis variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
Integer32r/w
Constraints:
range: 1-608
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.9
igmpNewCfgQurMaxRespTimeThe maximum query response interval advertised in
IGMP queries on this VLAN.
Integer32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.10
igmpNewCfgOtherQurAddressThe IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.11
igmpNewCfgOtherQurPresentIntThe Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) time…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.12
igmpNewCfgVlanOperVersionIndicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
should be configured on the ba…
Enumerationr/w
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.13
igmpNewVlanOperVersionIndicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).
Enumeration
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.14
igmpNewVlanOlderVerTimerIndicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.15
igmpNewCfgQuerierDefaultAction to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read.
Enumerationr/w
Enumerated Values:
1other
2default
.1.3.6.1.4.1.20301.2.7.16.3.1.19.16.1.16
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipmcCurCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipmcCurCfgStaticRouteTable'
The table of static IPMC routes in the current configuration block.
ipmcCurCfgStaticRouteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1
A row in the static IPMC route table
Column Syntax OID
ipmcCurCfgStaticRouteIndxThe index of the IPMC static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.1
ipmcCurCfgStaticRouteDestIpThe destination IPMC address of this IPMC route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.2
ipmcCurCfgStaticRouteVlanIdThe vlan id of this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.3
ipmcCurCfgStaticRouteHostBmapThe Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.4
ipmcCurCfgStaticRoutePMrtrBmapThe Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.5
ipmcCurCfgStaticRouteBMrtrBmapThe Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.6
ipmcCurCfgStaticRouteVridThe virtual router id of this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.7
ipmcCurCfgStaticRouteAdminkeysThe LACP port adminkey of this route.
Adminkeys on five positions alligned to right, separated by commas.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.8
ipmcCurCfgStaticRouteTrunksThe trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| |…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.2.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipmcNewCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipmcNewCfgStaticRouteTable'
The table of IPMC static routes in the new
configuration block.
When creating a new route, Destination IP
and Vlan id must be set first.
The actual change in configuration occurs
on using PortInfo leaf.
ipmcNewCfgStaticRouteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1
A row in the static IPMC route table
Column Syntax OID
ipmcNewCfgStaticRouteIndxThe index of the IPMC static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.1
ipmcNewCfgStaticRouteDestIpThe destination IPMC address of this route.
It must be set along Vlan id before creating
new route.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.2
ipmcNewCfgStaticRouteVlanIdThe vlan id of this route.
It must be set along Destination IP before
creating new route.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.3
ipmcNewCfgStaticRouteHostBmapThe Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.4
ipmcNewCfgStaticRoutePMrtrBmapThe Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.5
ipmcNewCfgStaticRouteBMrtrBmapThe Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.6
ipmcNewCfgStaticRouteAddPortIndexThe port to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this l…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.7
ipmcNewCfgStaticRouteTrunksThe trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| |…
OctetString.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.8
ipmcNewCfgStaticRouteAddTrunkThe trunk group number to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to s…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.9
ipmcNewCfgStaticRouteRemTrunkThe trunk group number to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.10
ipmcNewCfgStaticRouteAdminkeysThe LACP port adminkeys list for to this IPMC route.
Adminkeys on five positions alligned to right, separated by commas
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.11
ipmcNewCfgStaticRouteAddAdminkeyThe LACP port adminkey to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to s…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.12
ipmcNewCfgStaticRouteRemAdminkeyThe LACP port adminkey to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.13
ipmcNewCfgStaticRoutePortInfoThe Port/Trunk/Adminkey Information to be added to
this IPMC route (host/primary/backup). Use it only
right after you set a new port/trunk/adminkey to
specify its type.
Warning: If snooping is enabled, primary/backup
…
Enumerationr/w
Enumerated Values:
1host
2primary
3backup
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.14
ipmcNewCfgStaticRouteVridThe virtual router id of this route.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.15
ipmcNewCfgStaticRouteDeleteDelete this route.Enumerationr/w
Enumerated Values:
0no
2delete
3deletehost
4deleteprimary
5deletebackup
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.16
ipmcNewCfgStaticRouteRemPortIndexThe port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.17
ipmcNewCfgStaticRouteAddPortAliasThe port to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this l…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.18
ipmcNewCfgStaticRouteRemPortAliasThe port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.20.3.1.19
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgStaticNbrTable'
The table of static NBR Cache entries in the current configuration block.
ipCurCfgStaticNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1
A row in the static NBR Cache table
Column Syntax OID
ipCurCfgStaticNbrIndxThe index of the static NBR Cache table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.1
ipCurCfgStaticNbrIpThe IP address for the NBR Cache entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.2
ipCurCfgStaticNbrMACThe MAC address for the NBR Cache entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.3
ipCurCfgStaticNbrVlanThe VLAN for the NBR Cache entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.4
ipCurCfgStaticNbrPortIndexThe port for the NBR Cache entry.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.5
ipCurCfgStaticNbrPortAliasThe alias of the port for the NBR Cache entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.21.2.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgStaticNbrTable'
The table of static NBR Cache entries in the new configuration block.
ipNewCfgStaticNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1
A row in the static NBR Cache table
Column Syntax OID
ipNewCfgStaticNbrIndxThe index of the static NBR Cache table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.1
ipNewCfgStaticNbrIpThe IP address for the NBR Cache entry.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.2
ipNewCfgStaticNbrMACThe MAC address for the NBR Cache entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.3
ipNewCfgStaticNbrVlanThe VLAN for the NBR Cache entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.4
ipNewCfgStaticNbrPortIndexThe port for the NBR Cache entry.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.5
ipNewCfgStaticNbrActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.6
ipNewCfgStaticNbrPortAliasThe alias of the port for the NBR Cache entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.21.3.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.22.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgGwIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgGwIpv6Table'
The table of IPv6 gateways in the Current configuration Block.
ipCurCfgGwIpv6Entry row .1.3.6.1.4.1.20301.2.7.16.3.1.22.2.1
A row in the Ipv6 gateway table
Column Syntax OID
ipCurCfgGwIpv6IndexThe IPv6 gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.22.2.1.1
ipCurCfgGwIpv6AddrThe IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx o…
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.22.2.1.2
ipCurCfgGwIpv6StateThe state of the default IPv6 gateway.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.22.2.1.3
.1.3.6.1.4.1.20301.2.7.16.3.1.22.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgGwIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgGwIpv6Table'
The table of IPv6 gateways in the new configuration block.
ipNewCfgGwIpv6Entry row .1.3.6.1.4.1.20301.2.7.16.3.1.22.3.1
A row in the Ipv6 gateway table
Column Syntax OID
ipNewCfgGwIpv6IndexThe IPv6 gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.22.3.1.1
ipNewCfgGwIpv6AddrThe IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.22.3.1.2
ipNewCfgGwIpv6StateThe state of the default IPv6 gateway.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.22.3.1.3
ipNewCfgGwIpv6DeleteWhen set to the value of 2 (delete), the default gw is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the default IPv6 gw.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.22.3.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticRoute6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgStaticRoute6Table'
The table of static IP6 routes in the current configuration block.
ipCurCfgStaticRoute6Entry row .1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1
A row in the static IP6 route table
Column Syntax OID
ipCurCfgStaticRoute6IndxThe index of the static IP6 routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1.1
ipCurCfgStaticRoute6DestIpThe destination IP6 address of this route.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1.2
ipCurCfgStaticRoute6MaskThe destination IP6 prefix len of this route.Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1.3
ipCurCfgStaticRoute6GatewayThe IP6 address of the gateway for this route.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1.4
ipCurCfgStaticRoute6InterfaceThe IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.23.2.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticRoute6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgStaticRoute6Table'
The table of static IP6 routes in the new configuration block.
ipNewCfgStaticRoute6Entry row .1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1
A row in the static IP6 route table
Column Syntax OID
ipNewCfgStaticRoute6IndxThe index of the static IP6 routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.1
ipNewCfgStaticRoute6DestIpThe destination IP6 address of this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.2
ipNewCfgStaticRoute6MaskThe prefix length of this route.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.3
ipNewCfgStaticRoute6GatewayThe IP6 address of the gateway for this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:x…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.4
ipNewCfgStaticRoute6ActionSet the value '2' to delete the entire route entry.
Value 1 (other) is returned when read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.5
ipNewCfgStaticRoute6InterfaceThe IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.23.3.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgIntfLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipCurCfgIntfLoopbackTable'
The table of IP Loopback interface configuration.
ipCurCfgIntfLoopbackEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1
A row in the Ip Loopback interface table
Column Syntax OID
ipCurCfgIntfLoopbackIndexThe Loopback interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1.1
ipCurCfgIntfLoopbackAddrThe IP address of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1.2
ipCurCfgIntfLoopbackMaskThe subnet mask of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1.3
ipCurCfgIntfLoopbackBroadcastThe broadcast address of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1.4
ipCurCfgIntfLoopbackStateThe state of the interface.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.24.2.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgIntfLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipNewCfgIntfLoopbackTable'
The table of loopback interface in the new configuration block.
ipNewCfgIntfLoopbackEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1
A row in the Ip Loopback interface table
Column Syntax OID
ipNewCfgIntfLoopbackIndexThe Loopback interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1.1
ipNewCfgIntfLoopbackAddrThe IP address of the interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1.2
ipNewCfgIntfLoopbackMaskThe subnet mask of the interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1.3
ipNewCfgIntfLoopbackStateThe state of the interface.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1.6
ipNewCfgIntfLoopbackDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.24.3.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgAreaTable'
The table of OSPFv3 area in the current configuration block.
ospf3CurCfgAreaEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1
Information about a OSPFv3 area.
Column Syntax OID
ospf3CurCfgAreaIndexThe OSPFv3 area number for which the OSPFv3 area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.1
ospf3CurCfgAreaIdThe IP Address of the OSPFv3 area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.2
ospf3CurCfgAreaStbIntervalThe stability interval for the NSSA areaInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.3
ospf3CurCfgAreaTypeType of Area.
transit(1)
stub(2)
nssa(3)
Enumeration
Enumerated Values:
1transit
2stub
3nssa
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.4
ospf3CurCfgAreaNoSummStatus
disabled(0)
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.5
ospf3CurCfgAreaDefaultMetricMetric for stub/NSSA area (1-16777215)Integer32
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.6
ospf3CurCfgAreaDefaultMetricTypeMetric Type for stub/NSSA area (1-3)Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.7
ospf3CurCfgAreaTranslRoleTranslation role for the NSSA area.
always(1)
candidate(2)
Enumeration
Enumerated Values:
1always
2candidate
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.8
ospf3CurCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.2.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgAreaTable'
The table of OSPFv3 Area configuration in the new configuration block.
ospf3NewCfgAreaEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1
Information about a OSPFv3 area.
Column Syntax OID
ospf3NewCfgAreaIndexThe OSPFv3 area number for which the OSPFv3 area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.1
ospf3NewCfgAreaIdThe IP Address of the OSPFv3 area.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.2
ospf3NewCfgAreaStbIntervalThe Stability interval for the NSSA area.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.3
ospf3NewCfgAreaTypeType of Area.
transit(1)
stub(2)
nssa(3)
Enumerationr/w
Enumerated Values:
1transit
2stub
3nssa
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.4
ospf3NewCfgAreaNoSummStatus
disabled(0)
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.5
ospf3NewCfgAreaDefaultMetricMetric for stub/NSSA area (1-16777215)Integer32r/w
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.6
ospf3NewCfgAreaDefaultMetricTypeMetric Type for stub/NSSA area (1-3)Integer32r/w
Constraints:
range: 1-3
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.7
ospf3NewCfgAreaTranslRoleTranslation role for the NSSA area.
always(1)
candidate(2)
Enumerationr/w
Enumerated Values:
1always
2candidate
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.8
ospf3NewCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.9
ospf3NewCfgAreaDeleteDelete the area
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.20301.2.7.16.3.1.26.3.1.10
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgHostTable'
The table of OSPFv3 Host configuration.
ospf3CurCfgHostEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1
Information about a OSPFv3 host.
Column Syntax OID
ospf3CurCfgHostIndexThe OSPFv3 host number for which the OSPFv3 host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1.1
ospf3CurCfgHostIpAddrThe IPv6 Address of the OSPFv3 host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1.2
ospf3CurCfgHostAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1.3
ospf3CurCfgHostCostThe cost of the OSPFv3 host.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1.4
ospf3CurCfgHostStateEnable or disable an OSPFv3 HostEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.4.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgHostTable'
The table of OSPFv3 Host configuration.
ospf3NewCfgHostEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1
Information about a OSPFv3 host.
Column Syntax OID
ospf3NewCfgHostIndexThe OSPFv3 host number for which the OSPFv3 host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.1
ospf3NewCfgHostIpAddrThe IP6 Address of the OSPFv3 host.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.2
ospf3NewCfgHostAreaIndexThe OSPFv3 area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.3
ospf3NewCfgHostCostThe cost of the OSPFv3 host.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.4
ospf3NewCfgHostStateEnable or disable an OSPFv3 HostEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.5
ospf3NewCfgHostDeleteDelete the OSPFv3 host:
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.20301.2.7.16.3.1.26.5.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgNbrTable'
The table of OSPFv3 Neighbor configuration.
ospf3CurCfgNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1
Information about a OSPFv3 neighbor.
Column Syntax OID
ospf3CurCfgNbrIndexThe OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1.1
ospf3CurCfgNbrIpAddrThe IPv6 Address of the OSPFv3 neighbor.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1.2
ospf3CurCfgNbrIntfIndexThe interface index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1.3
ospf3CurCfgNbrPriorityThe priority of the OSPFv3 neighbor.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1.4
ospf3CurCfgNbrStateEnable or disable an OSPFv3 neighborEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.6.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgNbrTable'
The table of OSPFv3 Neighbor configuration.
ospf3NewCfgNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1
Information about a OSPFv3 neighbor.
Column Syntax OID
ospf3NewCfgNbrIndexThe OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.1
ospf3NewCfgNbrIpAddrThe IP6 Address of the OSPFv3 neighbor.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxx…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.2
ospf3NewCfgNbrIntfIndexThe OSPFv3 interface index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.3
ospf3NewCfgNbrPriorityThe cost of the OSPFv3 neighbor.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.4
ospf3NewCfgNbrStateEnable or disable an OSPFv3 NeighborEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.5
ospf3NewCfgNbrDeleteDelete the OSPFv3 neighbor:
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.20301.2.7.16.3.1.26.7.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8 · 1 row entry · 24 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgIntfTable'
The table of OSPFv3 Interface in the current configuration block.
ospf3CurCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1
Information about an OSPFv3 Interface.
Column Syntax OID
ospf3CurCfgIntfIndexThe OSPFv3 Interface number for which the OSPFv3 Interface table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.1
ospf3CurCfgIntfInstIdInterface Instance IdInteger32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.2
ospf3CurCfgIntfAreaThe index of the area that the interface belongsInteger32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.3
ospf3CurCfgIntfCostInterface costInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.4
ospf3CurCfgIntfPrioInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.5
ospf3CurCfgIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.6
ospf3CurCfgIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.7
ospf3CurCfgIntfPollPoll interval(1..4294967295)Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.8
ospf3CurCfgIntfTransTransmit delayInteger32
Constraints:
range: 1-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.9
ospf3CurCfgIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.10
ospf3CurCfgIntfPassivePassive interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.11
ospf3CurCfgIntfNetworkTypeNetwork Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
Enumeration
Enumerated Values:
1broadcast
2non-broadcast
3point-to-point
4point-to-multipoint
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.12
ospf3CurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.16
ospf3CurCfgIntfAuthSpiSpi Id(256 - 4294967295)Unsigned32
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.17
ospf3CurCfgIntfAuthEnableStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.18
ospf3CurCfgIntfAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.19
ospf3CurCfgIntfAuthKeyAuthentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.20
ospf3CurCfgIntfEncrySpiSpi Id(256 - 4294967295)Unsigned32
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.21
ospf3CurCfgIntfEncryEnableStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.22
ospf3CurCfgIntfEncryTypeEncryption Type
null(0),
aes(3)
Enumeration
Enumerated Values:
0null
3aes
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.23
ospf3CurCfgIntfEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
OctetString
Constraints:
range: 4-48
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.24
ospf3CurCfgIntfEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.25
ospf3CurCfgIntfEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.26
ospf3CurCfgIntfLsaSupressLSA Supression on interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.8.1.27
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9 · 1 row entry · 27 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgIntfTable'
The table of OSPFv3 interface in the new configuration block.
ospf3NewCfgIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1
Information about an OSPFv3 interface.
Column Syntax OID
ospf3NewCfgIntfIndexThe OSPFv3 Interface number for which the OSPFv3 Interface table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.1
ospf3NewCfgIntfInstIdInterface Instance Id (0..255)Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.2
ospf3NewCfgIntfAreaThe index of the area that the interface belongs (0..2)Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.3
ospf3NewCfgIntfCostInterface cost(1..65535) and 0 for noneInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.4
ospf3NewCfgIntfPrioInterface router priority(0..255)Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.5
ospf3NewCfgIntfHelloHello interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.6
ospf3NewCfgIntfDeadDead interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.7
ospf3NewCfgIntfPollPoll interval(1..4294967295)Unsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.8
ospf3NewCfgIntfTransTransmit delay(1..1800)Integer32r/w
Constraints:
range: 1-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.9
ospf3NewCfgIntfRetraRetransmit interval(1..1800)Integer32r/w
Constraints:
range: 1-1800
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.10
ospf3NewCfgIntfPassivePassive interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.11
ospf3NewCfgIntfNetworkTypeNetwork Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
Enumerationr/w
Enumerated Values:
1broadcast
2non-broadcast
3point-to-point
4point-to-multipoint
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.12
ospf3NewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.16
ospf3NewCfgIntfDeleteDelete the interface
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.17
ospf3NewCfgIntfAuthSpiAuthentication Spi Id(256 - 4294967295)Unsigned32r/w
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.18
ospf3NewCfgIntfAuthEnableAuthentication Status
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.19
ospf3NewCfgIntfAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)
Enumerationr/w
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.20
ospf3NewCfgIntfAuthKeyAuthentication Type
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)
OctetStringr/w
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.21
ospf3NewCfgIntfAuthResetReset AH configuration
other(0),
reset(1)
Enumerationr/w
Enumerated Values:
0other
1reset
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.22
ospf3NewCfgIntfEncrySpiEncryption Spi Id(256 - 4294967295)Unsigned32r/w
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.23
ospf3NewCfgIntfEncryEnableEncryption Status
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.24
ospf3NewCfgIntfEncryTypeEncryption Type
null(0),
aes(3)
Enumerationr/w
Enumerated Values:
0null
3aes
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.25
ospf3NewCfgIntfEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
OctetStringr/w
Constraints:
range: 4-48
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.26
ospf3NewCfgIntfEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumerationr/w
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.27
ospf3NewCfgIntfEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)
OctetStringr/w
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.28
ospf3NewCfgIntfEncryResetReset Encryption configuration
other(0),
reset(1)
Enumerationr/w
Enumerated Values:
0other
1reset
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.29
ospf3NewCfgIntfLsaSupressLSA Supression on interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.9.1.30
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgVirtIntfTable'
The table of OSPFv3 Virtual Interface configuration in the current 
configuration.
ospf3CurCfgVirtIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1
Information about an OSPFv3v3 virtual Interface.
Column Syntax OID
ospf3CurCfgVirtIntfIndexThe OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.1
ospf3CurCfgVirtIntfAreaIdThe index of the OSPFv3 area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.3
ospf3CurCfgVirtIntfNbrThe IP Address of the OSPFv3 neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.4
ospf3CurCfgVirtIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.5
ospf3CurCfgVirtIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.6
ospf3CurCfgVirtIntfTransTransmit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.7
ospf3CurCfgVirtIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.8
ospf3CurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.10.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgVirtIntfTable'
The table of OSPFv3 Virtual interface in the new configuration block.
ospf3NewCfgVirtIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1
Information about an OSPFv3 virtual interface.
Column Syntax OID
ospf3NewCfgVirtIntfIndexThe OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.1
ospf3NewCfgVirtIntfAreaIdThe index of the OSPFv3 area to which this virtual interface
belongs.
Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.3
ospf3NewCfgVirtIntfNbrThe IP Address of the OSPFv3 neighbor for this virtual interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.4
ospf3NewCfgVirtIntfHelloHello interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.5
ospf3NewCfgVirtIntfDeadDead interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.6
ospf3NewCfgVirtIntfTransTransmit delay(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.7
ospf3NewCfgVirtIntfRetraRetransmit interval(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.8
ospf3NewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.9
ospf3NewCfgVirtIntfDeleteDelete
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.3.1.26.11.1.10
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgRangeTable'
The table of OSPFv3 summary range in the current configuration.
ospf3CurCfgRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1
Information about an OSPFv3 summary range.
Column Syntax OID
ospf3CurCfgRangeIndexThe range number for which the OSPFv3 summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.1
ospf3CurCfgRangeAddrThe IPv6 Address of the range.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.2
ospf3CurCfgRangePrefixLenThe prefix length of the range.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.3
ospf3CurCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.4
ospf3CurCfgRangeHideStateThe state of the hide range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.5
ospf3CurCfgRangeLsaTypeThe LSA type for aggregation.
summary(8195),
type7(8199)
Enumeration
Enumerated Values:
8195summary
8199type7
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.6
ospf3CurCfgRangeRouteTagThe route tag of the range.Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.7
ospf3CurCfgRangeStateThe state of the range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.12.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgRangeTable'
The table of OSPFv3 summary range in the new configuration.
ospf3NewCfgRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1
Information about an OSPFv3 summary range.
Column Syntax OID
ospf3NewCfgRangeIndexThe range number for which the OSPFv3 summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.1
ospf3NewCfgRangeAddrThe IPv6 Address of the range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xx…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.2
ospf3NewCfgRangePrefixLenThe prefix length of the range.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.3
ospf3NewCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.4
ospf3NewCfgRangeHideStateThe state of the hide range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.5
ospf3NewCfgRangeLsaTypeThe LSA type for aggregation.
summary(8195),
type7(8199)
Enumerationr/w
Enumerated Values:
8195summary
8199type7
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.6
ospf3NewCfgRangeRouteTagThe route tag of the range.Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.7
ospf3NewCfgRangeStateThe state of the range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.8
ospf3NewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.26.13.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgExtRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgExtRangeTable'
The table of OSPFv3 AS-External range in the current configuration.
ospf3CurCfgExtRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1
Information about an OSPFv3 AS-External range.
Column Syntax OID
ospf3CurCfgExtRangeIndexThe range number for which the OSPFv3 AS-External range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.1
ospf3CurCfgExtRangeAddrThe IPv6 Address of the AS-External range.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.2
ospf3CurCfgExtRangePrefixLenThe prefix length of the AS-External range.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.3
ospf3CurCfgExtRangeAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.4
ospf3CurCfgExtRangeTranslationThe state of the setting the P-bit in the generated LSA.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.5
ospf3CurCfgExtRangeAggrEffectThe aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
Enumeration
Enumerated Values:
1advertise
2not-advertise
3allowAll
4denyAll
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.6
ospf3CurCfgExtRangeStateThe state of the AS-External range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.14.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgExtRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgExtRangeTable'
The table of OSPFv3 summary AS-External range in the new configuration.
ospf3NewCfgExtRangeEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1
Information about an OSPFv3 summary AS-External range.
Column Syntax OID
ospf3NewCfgExtRangeIndexThe range number for which the OSPFv3 AS-External range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.1
ospf3NewCfgExtRangeAddrThe IPv6 Address of the AS-External range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.2
ospf3NewCfgExtRangePrefixLenThe prefix length of the AS-External range.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.3
ospf3NewCfgExtRangeAreaIndexThe area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.4
ospf3NewCfgExtRangeTranslationThe state of the setting the P-bit in the generated LSA.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.5
ospf3NewCfgExtRangeAggrEffectThe aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
Enumerationr/w
Enumerated Values:
1advertise
2not-advertise
3allowAll
4denyAll
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.6
ospf3NewCfgExtRangeStateThe state of the AS-External range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.7
ospf3NewCfgExtRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.26.15.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgRedistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3CurCfgRedistTable'
The table of OSPFv3 redistribution entries in the current configuration.
ospf3CurCfgRedistEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1
Information about an OSPFv3 redistribution entry.
Column Syntax OID
ospf3CurCfgRedistIndexThe redistribution entry number for which the OSPFv3 redistribution entry table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.1
ospf3CurCfgRedistAddrThe IPv6 Address of the redistribution entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.2
ospf3CurCfgRedistPrefixLenThe prefix length of the redistribution entry.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.3
ospf3CurCfgRedistMetricThe metric to be applied to the route.Integer32
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.4
ospf3CurCfgRedistMetricTypeThe metric type.
asExttype1(3),
asExttype2(4)
Enumeration
Enumerated Values:
3asExttype1
4asExttype2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.5
ospf3CurCfgRedistRouteTagThe route tag of the redistribution entry.Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.6
ospf3CurCfgRedistRouteTagTypeManualIndicates if the route tag is set manually.Enumeration
Enumerated Values:
0auto
1manual
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.7
ospf3CurCfgRedistStateThe state of the redistribution entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.16.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgRedistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3NewCfgRedistTable'
The table of OSPFv3 summary redistribution entry in the new configuration.
ospf3NewCfgRedistEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1
Information about an OSPFv3 summary redistribution entry.
Column Syntax OID
ospf3NewCfgRedistIndexThe redistribution entry number for which the OSPFv3 redistribution entry table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.1
ospf3NewCfgRedistAddrThe IPv6 Address of the redistribution entry.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xx…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.2
ospf3NewCfgRedistPrefixLenThe prefix length of the redistribution entry.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.3
ospf3NewCfgRedistMetricThe metric to be applied to the route.Integer32r/w
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.4
ospf3NewCfgRedistMetricTypeThe metric type.
asExttype1(3),
asExttype2(4)
Enumerationr/w
Enumerated Values:
3asExttype1
4asExttype2
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.5
ospf3NewCfgRedistRouteTagThe route tag of the redistribution entry.Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.6
ospf3NewCfgRedistRouteTagTypeManualIndicates if the route tag is set manually.Enumerationr/w
Enumerated Values:
0auto
1manual
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.7
ospf3NewCfgRedistStateThe state of the redistribution entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.8
ospf3NewCfgRedistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.26.17.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pptCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pptCurCfgTable'
The table of prefix policy table entries in the current configuration block.
pptCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1
A row in the prefix policy table
Indexes
Column Syntax OID
pptCurCfgIndxThe index of the prefix policy table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1.1
pptCurCfgPrefixThe prefix address for the prefix policy table entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1.2
pptCurCfgPrefixLenThe prefix length for the prefix policy table entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1.3
pptCurCfgPrecedenceThe precedence for the prefix policy table entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1.4
pptCurCfgLabelThe label for the prefix policy table entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.2.1.5
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pptNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::pptNewCfgTable'
The table of prefix policy table entries in the new configuration block.
pptNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1
A row in the prefix policy table
Indexes
Column Syntax OID
pptNewCfgIndxThe index of the prefix policy table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.1
pptNewCfgPrefixThe prefix address for the prefix policy table entry.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.2
pptNewCfgPrefixLenThe prefix length the prefix policy table entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.3
pptNewCfgPrecedenceThe precedence for the prefix policy table entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.4
pptNewCfgLabelThe label for the prefix policy table entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.5
pptNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.27.3.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.29.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanFloodCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlanFloodCurCfgTable'
The table of VLAN flooding configuration.
vlanFloodCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.29.1.1
A row in the VLAN flooding configuration table.
Column Syntax OID
vlanFloodCurCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.29.1.1.1
vlanFloodCurCfgFloodEnable or disable flooding unregistered IPMCsEnumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.1.1.2
vlanFloodCurCfgCpuEnable or disable sending unregistered IPMCs to CPUEnumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.1.1.3
vlanFloodCurCfgOptFloodEnable or disable optimized floodingEnumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.1.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.29.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanFloodNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vlanFloodNewCfgTable'
The table of VLAN flooding configuration.
vlanFloodNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.29.2.1
A row in the VLAN flooding configuration table.
Column Syntax OID
vlanFloodNewCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.29.2.1.1
vlanFloodNewCfgFloodEnable or disable flooding unregistered IPMCsEnumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.2.1.2
vlanFloodNewCfgCpuEnable or disable sending unregistered IPMCs to CPUEnumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.2.1.3
vlanFloodNewCfgOptFloodEnable or disable optimized floodingEnumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.29.2.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldCurInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldCurInterfaceTable'
The (conceptual) table listing the interfaces on which
MLD is enabled.
mldCurInterfaceEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1
An entry (conceptual row) representing an interface on
which MLD is enabled.
Column Syntax OID
mldCurInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.1
mldCurInterfaceQueryIntervalThe frequency at which MLD Host-Query packets are
transmitted on this interface.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.2
mldCurInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
Enumeration
Enumerated Values:
1mldv1
2mldv2
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.3
mldCurInterfaceQueryMaxResponseIntvlThe maximum query response time advertised in MLD
queries on this interface.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.4
mldCurInterfaceRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. T…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.5
mldCurInterfaceLastListenQueryIntvlThe Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value m…
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.6
mldCurInterfaceDMrtrEnaDynamic MRouter learning.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.7
mldCurInterfaceStateState of the MLD interface.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.30.3.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldNewInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldNewInterfaceTable'
The (conceptual) table listing the interfaces on which
MLD is enabled.
mldNewInterfaceEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1
An entry (conceptual row) representing an interface on
which MLD is enabled.
Column Syntax OID
mldNewInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.1
mldNewInterfaceQueryIntervalThe frequency at which MLD Host-Query packets are
transmitted on this interface.
secondsInteger32r/w
Constraints:
range: 2-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.2
mldNewInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
Enumerationr/w
Enumerated Values:
1mldv1
2mldv2
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.3
mldNewInterfaceQueryMaxResponseIntvlThe maximum query response time advertised in MLD
queries on this interface.
secondsInteger32r/w
Constraints:
range: 1000-65535
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.4
mldNewInterfaceRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. T…
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.5
mldNewInterfaceLastListenQueryIntvlThe Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value m…
secondsInteger32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.6
mldNewInterfaceDMrtrEnaDynamic MRouter learning.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.7
mldNewInterfaceStateState of the MLD interface.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.8
mldNewInterfaceDefaultAction to set the MLD interface configuration to default.
Returns other(1) when read.
Enumerationr/w
Enumerated Values:
1other
2default
.1.3.6.1.4.1.20301.2.7.16.3.1.30.4.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ndprefixCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ndprefixCurCfgTable'
The ndprefix table entries in the current configuration block.
ndprefixCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1
A row in the ndprefix table.
Column Syntax OID
ndprefixCurCfgIndxThe index of the ndprefix table.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.1
ndprefixCurCfgPrefixThe prefix address for the prefix table entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.2
ndprefixCurCfgPrefixLenThe prefix length for the prefix table entry.Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.3
ndprefixCurCfgInterfaceIndexThe interface index for the prefix table entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.4
ndprefixCurCfgProfileIndexThe profile index for the prefix table entry
Profile 0 is the default profile.
Integer32
Constraints:
range: 0-127
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.5
ndprefixCurCfgValidLifetimeThe Valid lifetime for the prefix table entry.Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.6
ndprefixCurCfgValidLifetimeFlagThe Valid lifetime fixed flag for the prefix table entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.7
ndprefixCurCfgPreferredLifetimeThe Preferred Lifetime for the prefix table entry.Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.8
ndprefixCurCfgPreferredLifetimeFlagThe Preferred Lifetime fixed flag for the prefix table entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.9
ndprefixCurCfgOnlinkFlagThe Onlink flag for the prefix table entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.10
ndprefixCurCfgAutonomousFlagThe Autonomous flag for the prefix table entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.11
ndprefixCurCfgStateThe state for the prefix table entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.2.1.12
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ndprefixNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ndprefixNewCfgTable'
The ndprefix table entries in the new configuration block.
ndprefixNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1
A row in the prefix table
Column Syntax OID
ndprefixNewCfgIndxThe index of the prefix table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.1
ndprefixNewCfgPrefixThe prefix address for the prefix table entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.2
ndprefixNewCfgPrefixLenThe prefix length for the prefix table entry.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.3
ndprefixNewCfgInterfaceIndexThe interface index for the prefix table entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.4
ndprefixNewCfgProfileIndexThe profile index for the prefix table entry.
Profile 0 is the default profile.
Integer32r/w
Constraints:
range: 0-127
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.5
ndprefixNewCfgValidLifetimeThe Valid lifetime for the prefix table entry.Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.6
ndprefixNewCfgValidLifetimeFlagThe Valid lifetime fixed flag for the prefix table entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.7
ndprefixNewCfgPreferredLifetimeThe Preferred Lifetime for the prefix table entry.Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.8
ndprefixNewCfgPreferredLifetimeFlagThe Preferred Lifetime fixed flag for the prefix table entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.9
ndprefixNewCfgOnlinkFlagThe Onlink flag for the prefix table entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.10
ndprefixNewCfgAutonomousFlagThe Autonomous flag for the prefix table entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.11
ndprefixNewCfgStateThe state for the prefix table entry.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.12
ndprefixNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted.
When set to the value of 3 (deleteall), all entries are deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) or 3(de…
Enumerationr/w
Enumerated Values:
1other
2delete
3deleteall
.1.3.6.1.4.1.20301.2.7.16.3.1.31.3.1.13
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ikeCurCfgPskRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ikeCurCfgPskRemoteTable'
The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2.
ikeCurCfgPskRemoteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2.1
An entry (conceptual row) representing a remote pre-shared key for a peer address.
Column Syntax OID
ikeCurCfgPskRemoteIndexThe index of ikeCurCfgPskRemoteTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2.1.1
ikeCurCfgPskRemoteAddrCurrent IPv6 address of peer.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2.1.2
ikeCurCfgPskRemoteKeyCurrent remote pre-shared key.OctetString
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2.1.3
ikeCurCfgPskRemoteDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.3.2.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ikeNewCfgPskRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ikeNewCfgPskRemoteTable'
The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2.
ikeNewCfgPskRemoteEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2.1
An entry (conceptual row) representing a remote pre-shared key for a peer address.
Column Syntax OID
ikeNewCfgPskRemoteIndexThe index of ikeNewCfgPskRemoteTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2.1.1
ikeNewCfgPskRemoteAddrNew IPv6 address of peer.OctetStringr/w
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2.1.2
ikeNewCfgPskRemoteKeyNew remote pre-shared key.OctetStringr/w
Constraints:
range: 1-256
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2.1.3
ikeNewCfgPskRemoteDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.1.4.2.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgTxformTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecCurCfgTxformTable'
The (conceptual) table listing all of the IPsec transform-set.
ipsecCurCfgTxformEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1
An entry (conceptual row) representing a IPsec transform-set.
Column Syntax OID
ipsecCurCfgTxformIndexThe index of ipsecCurCfgTxformTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.1
ipsecCurCfgTxformAuthThe authentication algorithm of the IPsec transform-setEnumeration
Enumerated Values:
0none
1ah-sha1
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.2
ipsecCurCfgTxformCipherThe encryption algorithm of the IPsec transform-setEnumeration
Enumerated Values:
0esp-null
1esp-3des
2esp-aes-cbc
3unspecified
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.3
ipsecCurCfgTxformIntegrityThe interity algorithm of the IPsec transform-setEnumeration
Enumerated Values:
0none
1esp-sha1
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.4
ipsecCurCfgTxformModeThe tunnel/transport mode of the IPsec transform-setEnumeration
Enumerated Values:
1transport
2tunnel
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.5
ipsecCurCfgTxformDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.3.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgTxformTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecNewCfgTxformTable'
The (conceptual) table listing all of the new IPsec transform-set to be apply.
ipsecNewCfgTxformEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1
An entry (conceptual row) representing a IPsec transform-set.
Column Syntax OID
ipsecNewCfgTxformIndexThe index of ipsecNewCfgTxformTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.1
ipsecNewCfgTxformAuthThe authentication algorithm of the IPsec transform-setEnumerationr/w
Enumerated Values:
0none
1ah-sha1
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.2
ipsecNewCfgTxformCipherThe encryption algorithm of the IPsec transform-setEnumerationr/w
Enumerated Values:
0esp-null
1esp-3des
2esp-aes-cbc
3unspecified
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.3
ipsecNewCfgTxformIntegrityThe interity algorithm of the IPsec transform-setEnumerationr/w
Enumerated Values:
0none
1esp-sha1
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.4
ipsecNewCfgTxformModeThe tunnel/transport mode of the IPsec transform-setEnumerationr/w
Enumerated Values:
1transport
2tunnel
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.5
ipsecNewCfgTxformDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.4.1.6
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgSelectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecCurCfgSelectorTable'
The (conceptual) table listing all of the IPsec selector.
ipsecCurCfgSelectorEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1
An entry (conceptual row) representing a IPsec selector.
Column Syntax OID
ipsecCurCfgSelectorIndexThe index of ipsecCurCfgSelectorTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.1
ipsecCurCfgSelectorActionThe action of the IPsec selectorEnumeration
Enumerated Values:
0unspecified
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.2
ipsecCurCfgSelectorProtoThe protocol of the IPsec selectorEnumeration
Enumerated Values:
0unspecified
1tcp
2icmp
3any
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.3
ipsecCurCfgSelectorIcmpTypeWhen the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.4
ipsecCurCfgSelectorDstThe destination ip address of the IPsec selectorOctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.6
ipsecCurCfgSelectorDstPrefixThe destination ipv6 address prefix length of the IPsec selectorUnsigned32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.7
ipsecCurCfgSelectorSrcThe source ip address of the IPsec selectorOctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.8
ipsecCurCfgSelectorDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.5.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgSelectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecNewCfgSelectorTable'
The (conceptual) table listing all of the IPsec selector.
ipsecNewCfgSelectorEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1
An entry (conceptual row) representing a IPsec selector.
Column Syntax OID
ipsecNewCfgSelectorIndexThe index of ipsecNewCfgSelectorTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.1
ipsecNewCfgSelectorActionThe action of the IPsec selectorEnumerationr/w
Enumerated Values:
0unspecified
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.2
ipsecNewCfgSelectorProtoThe protocol of the IPsec selectorEnumerationr/w
Enumerated Values:
0unspecified
1tcp
2icmp
3any
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.3
ipsecNewCfgSelectorIcmpTypeWhen the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.4
ipsecNewCfgSelectorDstThe destination ipv6 address of the IPsec selectorOctetStringr/w
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.6
ipsecNewCfgSelectorDstPrefixThe destination ipv6 address prefix length of the IPsec selectorUnsigned32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.7
ipsecNewCfgSelectorSrcThe source ip address of the IPsec selectorOctetStringr/w
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.8
ipsecNewCfgSelectorDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.6.1.9
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgDynamicPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecCurCfgDynamicPolicyTable'
The (conceptual) table listing all of the IPsec dynamic policies.
ipsecCurCfgDynamicPolicyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1
An entry (conceptual row) representing a IPsec dynamic policy.
Column Syntax OID
ipsecCurCfgDynamicPolicyIndexThe index of ipsecCurCfgDynamicPolicyTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.1
ipsecCurCfgDynamicPolicyPeerThe remote peer ip address.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.2
ipsecCurCfgDynamicPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable. 0 = unspecified.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.3
ipsecCurCfgDynamicPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable. 0 = unspecified.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.4
ipsecCurCfgDynamicPolicyLifetimeThe SA lifetime for an IPsec policy.Unsigned32
Constraints:
range: 120-86400
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.5
ipsecCurCfgDynamicPolicyPfsEnable/disable perfect forward security.Enumeration
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.6
ipsecCurCfgDynamicPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.7.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgDynamicPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecNewCfgDynamicPolicyTable'
The (conceptual) table listing all of the IPsec dynamic policies.
ipsecNewCfgDynamicPolicyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1
An entry (conceptual row) representing a IPsec dynamic policy.
Column Syntax OID
ipsecNewCfgDynamicPolicyIndexThe index of ipsecNewCfgDynamicPolicyTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.1
ipsecNewCfgDynamicPolicyPeerThe remote peer ip address.OctetStringr/w
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.2
ipsecNewCfgDynamicPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable. 0 = unspecified.Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.3
ipsecNewCfgDynamicPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable. 0 = unspecified.Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.4
ipsecNewCfgDynamicPolicyLifetimeThe SA lifetime for an IPsec policy.Unsigned32r/w
Constraints:
range: 120-86400
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.5
ipsecNewCfgDynamicPolicyPfsEnable/disable perfect forward security.Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.6
ipsecNewCfgDynamicPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.8.1.7
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9 · 1 row entry · 15 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgManualPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecCurCfgManualPolicyTable'
The (conceptual) table listing all of the IPsec manual policies.
ipsecCurCfgManualPolicyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1
An entry (conceptual row) representing a IPsec manual policy.
Column Syntax OID
ipsecCurCfgManualPolicyIndexThe index of ipsecCurCfgManualPolicyTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.1
ipsecCurCfgManualPolicyPeerThe remote peer ip address.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.2
ipsecCurCfgManualPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTableUnsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.3
ipsecCurCfgManualPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTableUnsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.4
ipsecCurCfgManualPolicyInAhKeyThe AH inbound session key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.5
ipsecCurCfgManualPolicyInAhSpiThe AH inbound SPI for an IPsec policy.Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.6
ipsecCurCfgManualPolicyOutAhKeyThe AH outbound session key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.7
ipsecCurCfgManualPolicyOutAhSpiThe AH outbound SPI for an IPsec policy.Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.8
ipsecCurCfgManualPolicyInEspEncKeyThe Esp inbound cipher key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.9
ipsecCurCfgManualPolicyInEspAuthKeyThe Esp inbound authenticator key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.10
ipsecCurCfgManualPolicyInEspSpiThe Esp inbound SPI for an IPsec policy.Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.11
ipsecCurCfgManualPolicyOutEspEncKeyThe Esp outbound cipher key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.12
ipsecCurCfgManualPolicyOutEspAuthKeyThe Esp outbound authenticator key for an IPsec policy.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.13
ipsecCurCfgManualPolicyOutEspSpiThe Esp outbound SPI for an IPsec policy.Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.14
ipsecCurCfgManualPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.9.1.15
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10 · 1 row entry · 15 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgManualPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecNewCfgManualPolicyTable'
The (conceptual) table listing all of the IPsec manual policies.
ipsecNewCfgManualPolicyEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1
An entry (conceptual row) representing a IPsec manual policy.
Column Syntax OID
ipsecNewCfgManualPolicyIndexThe index of ipsecNewCfgManualPolicyTable.Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.1
ipsecNewCfgManualPolicyPeerThe remote peer ip address.OctetStringr/w
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.2
ipsecNewCfgManualPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTableUnsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.3
ipsecNewCfgManualPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTableUnsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.4
ipsecNewCfgManualPolicyInAhKeyThe AH inbound session key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.5
ipsecNewCfgManualPolicyInAhSpiThe AH inbound SPI for an IPsec policy.Unsigned32r/w
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.6
ipsecNewCfgManualPolicyOutAhKeyThe AH outbound session key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.7
ipsecNewCfgManualPolicyOutAhSpiThe AH outbound SPI for an IPsec policy.Unsigned32r/w
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.8
ipsecNewCfgManualPolicyInEspEncKeyThe Esp inbound cipher key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.9
ipsecNewCfgManualPolicyInEspAuthKeyThe Esp inbound authenticator key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.10
ipsecNewCfgManualPolicyInEspSpiThe Esp inbound SPI for an IPsec policy.Unsigned32r/w
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.11
ipsecNewCfgManualPolicyOutEspEncKeyThe Esp outbound cipher key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.12
ipsecNewCfgManualPolicyOutEspAuthKeyThe Esp outbound authenticator key for an IPsec policy.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.13
ipsecNewCfgManualPolicyOutEspSpiThe Esp outbound SPI for an IPsec policy.Unsigned32r/w
Constraints:
range: 0-0
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.14
ipsecNewCfgManualPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.10.1.15
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecCurCfgIfTable'
The table of interface IPsec policy configuration.
ipsecCurCfgIfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11.1
The table of interface IPsec policy configuration.
Column Syntax OID
ipsecCurCfgIfIndexThe identifier of a particular interface.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11.1.1
ipsecCurCfgIfDynamicPolicyBmapThe IPsec dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCT…
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11.1.2
ipsecCurCfgIfManualPolicyBmapThe manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 .…
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11.1.5
ipsecCurCfgIfDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.11.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecNewCfgIfTable'
The table of interface IPsec policy configuration.
ipsecNewCfgIfEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1
The table of interface IPsec policy configuration.
Column Syntax OID
ipsecNewCfgIfIndexThe identifier of a particular interface.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.1
ipsecNewCfgIfDynamicPolicyBmapThe dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 …
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.2
ipsecNewCfgIfAddDynamicPolicySet the value to a IPsec dynamic policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.3
ipsecNewCfgIfDelDynamicPolicySet the value to a IPsec dynamic policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.4
ipsecNewCfgIfManualPolicyBmapThe manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 .…
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.5
ipsecNewCfgIfAddManualPolicySet the value to a IPsec manual policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.6
ipsecNewCfgIfDelManualPolicySet the value to a IPsec manual policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.7
ipsecNewCfgIfDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.3.1.32.2.12.1.8
.1.3.6.1.4.1.20301.2.7.16.3.1.33.5 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dhcpSnoopingCurCfgPortTable'
DHCP Snooping Port Configuration Table.
dhcpSnoopingCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.33.5.1
A row in DHCP Snooping Port Configuration Table
Column Syntax OID
dhcpSnoopingCurCfgPortIdPort ID of this DHCP Snooping port configration.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.33.5.1.1
dhcpSnoopingCurCfgPortTrustedSet port as trusted or untrusted port.Enumeration
Enumerated Values:
1trusted
2untrusted
.1.3.6.1.4.1.20301.2.7.16.3.1.33.5.1.2
dhcpSnoopingCurCfgPortRateLimitSet port DHCP packet rate limit(pps).
Its ranges is 0 ~ 2048, set 0 to disable rate limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.33.5.1.3
dhcpSnoopingCurCfgPortAliasAlias port DHCP.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.3.1.33.5.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.33.6 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dhcpSnoopingNewCfgPortTable'
DHCP Snooping Port Configuration Table.
dhcpSnoopingNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.33.6.1
A row in the DHCP Snooping Port Configuration Table
Column Syntax OID
dhcpSnoopingNewCfgportIdPort ID of this DHCP Snooping port configration.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.33.6.1.1
dhcpSnoopingNewCfgportTrustedSet port as trusted or untrusted port.Enumerationr/w
Enumerated Values:
1trusted
2untrusted
.1.3.6.1.4.1.20301.2.7.16.3.1.33.6.1.2
dhcpSnoopingNewCfgportRateLimitSet port DHCP packet rate limit(pps). Set 0 to disable rate limit.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.1.33.6.1.3
dhcpSnoopingNewCfgPortAliasAlias port DHCP.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.3.1.33.6.1.4
.1.3.6.1.4.1.20301.2.7.16.3.1.33.7 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingCurCfgVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dhcpSnoopingCurCfgVlanTable'
DHCP Snooping VLAN Table.
dhcpSnoopingCurCfgVlanTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.33.7.1
A row in the DHCP Snooping VLAN Table
Column Syntax OID
dhcpSnoopingCurCfgVlanIdVLAN ID of this DHCP Snooping VLAN configration.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.20301.2.7.16.3.1.33.7.1.1
dhcpSnoopingCurCfgVlanOnStateon/off state of DHCP Snooping on this VLAN.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.3.1.33.7.1.2
.1.3.6.1.4.1.20301.2.7.16.3.1.33.8 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingNewCfgVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dhcpSnoopingNewCfgVlanTable'
DHCP Snooping VLAN Table.
dhcpSnoopingNewCfgVlanTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.1.33.8.1
A row in the DHCP Snooping VLAN Table
Column Syntax OID
dhcpSnoopingNewCfgVlanIdVLAN ID of this DHCP Snooping VLAN configration.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.20301.2.7.16.3.1.33.8.1.1
dhcpSnoopingNewCfgVlanOnStateEnable/Disable DHCP Snooping on this VLAN.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.3.1.33.8.1.2
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfAreaRxTxStats'
The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1
Rx Tx packet Statistics about a OSPF area.
Column Syntax OID
ospfAreaRxTxIndexThe index of the ospf Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.1
ospfAreaRxPktsThe total number of OSPF packets received in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.2
ospfAreaTxPktsThe total number of OSPF packets transmitted in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.3
ospfAreaRxHelloThe total number of Hello packets received in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.4
ospfAreaTxHelloThe total number of Hello packets transmitted in this OSPF
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.5
ospfAreaRxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.6
ospfAreaTxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.7
ospfAreaRxlsReqsThe total number of Link State Request packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.8
ospfAreaTxlsReqsThe total number of Link State Request packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.9
ospfAreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.10
ospfAreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.11
ospfAreaRxlsUpdatesThe total number of Link State Update packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.12
ospfAreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.1.1.13
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfAreaNbrChangeStats'
The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1
Area Neighbour Change Statistics about a OSPF area.
Column Syntax OID
ospfAreaNbrIndexThe index of the ospf Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.1
ospfAreaNbrhelloThe total number of Hello packets received from neighbours
in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.2
ospfAreaNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.3
ospfAreaNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.4
ospfAreaNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.5
ospfAreaNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.6
ospfAreaNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.7
ospfAreaNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.8
ospfAreaNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.9
ospfAreaNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.10
ospfAreaNbrRstAdThe total number of times the Neighbour adjacency has been reset
across this OPSF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.11
ospfAreaNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.12
ospfAreaNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.2.1.13
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfAreaChangeStats'
The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1
Area Change Statistics about a OSPF area.
Column Syntax OID
ospfAreaIntfIndexThe index of the OSPF Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.1
ospfAreaIntfHelloThe total number of Hello packets sent on this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.2
ospfAreaIntfDownThe total number of interfaces down in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.3
ospfAreaIntfLoopThe total number of interfaces no longer connected to
the attatched network in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.4
ospfAreaIntfUnloopThe total number of interfaces connected to the attatched
network in this OSPF area..
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.5
ospfAreaIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.6
ospfAreaIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.7
ospfAreaIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.3.1.8
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfAreaErrorStats'
The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1
Error Statistics for an OSPF area.
Column Syntax OID
ospfAreaErrIndexThe index of the OSPF Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.1
ospfAreaErrAuthFailureThe total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.2
ospfAreaErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.3
ospfAreaErrHelloMismatchThe total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.4
ospfAreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.5
ospfAreaErrOptionsMismatchThe total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.6
ospfAreaErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.7
ospfAreaErrAreaMismatchThe total number of packets received with a wrong area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.8
ospfAreaErrInvalidSelfOrigLsaThe total number of packets received with invalid self
originated LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.2.4.1.9
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIntfRxTxStats'
The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1
OSPF interface Rx/Tx packet statistics.
Column Syntax OID
ospfIntfRxTxIndexThe OSPF interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.1
ospfIntfRxPktsThe total number of OSPF packets received for this OSPF interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.2
ospfIntfTxPktsThe total number of OSPF packets transmitted for this OSPF interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.3
ospfIntfRxHelloThe total number of Hello packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.4
ospfIntfTxHelloThe total number of Hello packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.5
ospfIntfRxDatabaseThe total number of Database Description packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.6
ospfIntfTxDatabaseThe total number of Database Description packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.7
ospfIntfRxlsReqsThe total number of Link State Request packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.8
ospfIntfTxlsReqsThe total number of Link State Request packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.9
ospfIntfRxlsAcksThe total number of Link State Acknowledgement packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.10
ospfIntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.11
ospfIntfRxlsUpdatesThe total number of Link State Update packets received for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.12
ospfIntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.1.1.13
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIntfNbrChangeStats'
The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1
OSPF interface Neighbour Change statistics.
Column Syntax OID
ospfIntfNbrIndexThe index of the OSPF Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.1
ospfIntfNbrhelloThe total number of Hello packets received from neighbours
in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.2
ospfIntfNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.3
ospfIntfNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.4
ospfIntfNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.5
ospfIntfNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.6
ospfIntfNbrBadRequestsThe total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.7
ospfIntfNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.8
ospfIntfNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.9
ospfIntfNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.10
ospfIntfNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.11
ospfIntfNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.12
ospfIntfNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.2.1.13
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIntfChangeStats'
The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1
OSPF interface Change statistics.
Indexes
Column Syntax OID
ospfIntfIndexThe index of the OSPF Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.1
ospfIntfHelloThe total number of Hello packets sent by this interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.2
ospfIntfDownThe total number of times the interface was down.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.3
ospfIntfLoopThe total number of times the interface was no longer connected to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.4
ospfIntfUnloopThe total number of times the interface, connected back to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.5
ospfIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.6
ospfIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.7
ospfIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.3.1.8
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIntfErrorStats'
The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1
Error Statistics for an OSPF area.
Column Syntax OID
ospfIntfErrIndexThe index of the OSPF Intf for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.1
ospfIntfErrAuthFailureThe total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.2
ospfIntfErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.3
ospfIntfErrHelloMismatchThe total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.4
ospfIntfErrDeadMismatchThe total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.5
ospfIntfErrOptionsMismatchThe total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.6
ospfIntfErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.7
ospfIntfErrAreaMismatchThe total number of packets received with a wrong area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.8
ospfIntfErrInvalidSelfOrigLSAThe total number of packets received with invalid self-orig LSAs.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.6.3.4.1.9
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1 · 1 row entry · 18 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpSnoopStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpSnoopStats'
Statistics for IGMP Snooping.
igmpSnoopStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1
Statistics for IGMP Snooping.
Column Syntax OID
igmpSnoopVlanIndexThe index of the VLAN for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.1
rxIgmpValidPktsThe total number of valid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.2
rxIgmpInvalidPktsThe total number of invalid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.3
rxIgmpGenQueriesThe total number of IGMP General Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.4
rxIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.5
rxIgmpLeavesThe total number of IGMP Leave packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.6
rxIgmpReportsThe total number of IGMP Report packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.7
txIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets
transmitted on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.8
txIgmpReportsThe total number of IGMP Report packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.9
txIgmpLeavesThe total number of IGMP Leave packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.10
rxIgmpGroupSourceSpecificQueriesThe total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.11
rxIgmpV3CurrentStateRecordsThe total number of IGMP Current State Records (CSRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.12
rxIgmpV3SourceListChangeRecordsThe total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.13
rxIgmpV3FilterChangeRecordsThe total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.14
txIgmpGenQueriesThe total number of IGMP General Query packets send
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.16
rxIgmpDiscardPktsThe total number of IGMP packets discarded
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.17
rxIgmpPimHellosThe total number of Pim Hello packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.18
igmpClearVlanStatsSetting this to clear(1) results in clearing the statistics for this
snooping VLAN.
Enumerationr/w
Enumerated Values:
1clear
2ok
.1.3.6.1.4.1.20301.2.7.16.3.2.9.1.1.19
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bootpRelayStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bootpRelayStatsTable'
The BOOTP relay agent statistics.
bootpRelayStatsTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1
A row in the BOOTP relay agent statistics table.
Column Syntax OID
bootpRelayStatsIndexThe port number of the port associated with this BOOTP relay
statistics entry.
PortNumber.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.1
bootpRelayStatsRequestsReceivedThe total number of BOOTP request packets received on the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.2
bootpRelayStatsRequestsRelayedThe number of request packets relayed to the BOOTP server. If
there is more than one server, a request is relayed once for
each server; hence, with two servers, this counter will be twice
as many as the value of the boo…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.3
bootpRelayStatsRequestsDroppedNoRelayThis counter increases each time a request could not be relayed
because BOOTP relay is disabled or not allowed on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.5
bootpRelayStatsRequestsDroppedNoServerThis counter increases each time a request is dropped because
there is no configured server or the server is unreachable
because there is no active IP interface that can be used for
relaying the request to the server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.6
bootpRelayStatsRequestsDroppedErrorThis counter increases each time a request is dropped due to
various errors encountered while processing the request packet.
Such errors include short packet length, invalid 'hops' value,
and memory allocation errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.7
bootpRelayStatsRepliesReceivedThis is the total number of BOOTP response packets received on
the port associated with this object.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.8
bootpRelayStatsRepliesRelayedThis is the total number of response packets that were relayed
to the client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.9
bootpRelayStatsRepliesDroppedErrorThis counter increases each time a response packet is dropped
due to various errors encountered while processing the packet.
Errors include unknown relay agent addresses ('giaddr'), and
memory allocation errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.20.1.1.10
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaRxTxDisdStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3AreaRxTxDisdStats'
The table of Ospf3 Area Rx/Tx Statistics.
ospf3AreaRxTxDisdStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1
Rx Tx packet Statistics about a Ospf3 area.
Column Syntax OID
ospf3AreaRxTxDisdIndexThe index of the ospf3 Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.1
ospf3AreaRxPktsThe total number of Ospf3 packets received in this Ospf3 area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.2
ospf3AreaTxPktsThe total number of Ospf3 packets transmitted in this Ospf3 area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.3
ospf3AreaDisdPktsThe total number of Ospf3 packets discaded in this Ospf3 area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.4
ospf3AreaRxHelloThe total number of Hello packets received in this Ospf3 area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.5
ospf3AreaTxHelloThe total number of Hello packets transmitted in this Ospf3
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.6
ospf3AreaDisdHelloThe total number of Hello packets discaded in this Ospf3
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.7
ospf3AreaRxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.8
ospf3AreaTxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.9
ospf3AreaDisdDatabaseThe total number of Database Description packets discarded
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.10
ospf3AreaRxlsReqsThe total number of Link State Request packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.11
ospf3AreaTxlsReqsThe total number of Link State Request packets transmitted for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.12
ospf3AreaDisdlsReqsThe total number of Link State Request packets discarded for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.13
ospf3AreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.14
ospf3AreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.15
ospf3AreaDisdlsAcksThe total number of Link State Acknowledgement packets discarded
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.16
ospf3AreaRxlsUpdatesThe total number of Link State Update packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.17
ospf3AreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.18
ospf3AreaDisdlsUpdatesThe total number of Link State Update packets discarded for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.1.1.19
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3AreaNbrChangeStats'
The table of Ospf3 Neighbor change Statistics.
ospf3AreaNbrChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1
Ospf3 Neighbor Change statistics.
Column Syntax OID
ospf3AreaNbrIndexThe index of the Ospf3 Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.1
ospf3AreaNbrDownThe total number of times neighbors now existing on this area
have changed into DOWN state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.2
ospf3AreaNbrAttemptThe total number of times neighbors now existing on this area
have changed into ATTEMPT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.3
ospf3AreaNbrInitThe total number of times neighbors now existing on this area
have changed into INIT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.4
ospf3AreaNbrN2wayThe total number of times neighbors now existing on this area
have changed into 2WAY state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.5
ospf3AreaNbrExStartThe total number of times neighbors now existing on this area
have changed into EXSTART state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.6
ospf3AreaNbrExchangeThe total number of times neighbors now existing on this area
have changed into EXCHANGE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.7
ospf3AreaNbrLoadingThe total number of times neighbors now existing on this area
have changed into LOADING state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.8
ospf3AreaNbrFullThe total number of times neighbors now existing on this area
have changed into FULL state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.9
ospf3AreaNbrAllEventsThe total number of times neighbors now existing on this area
have changed state or an error had occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.2.1.10
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaIntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3AreaIntfChangeStats'
The table of Ospf3 Interface change Statistics.
ospf3AreaIntfChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1
Ospf3 interface Change statistics.
Column Syntax OID
ospf3AreaIntfIndexThe index of the Ospf3 Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.1
ospf3AreaIntfDownThe total number of changes into the DOWN State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.2
ospf3AreaIntfLoopThe total number of changes into the LOOP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.3
ospf3AreaIntfWaitingThe total number of changes into the WAITING State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.4
ospf3AreaIntfPtopThe total number of changes into the PTOP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.5
ospf3AreaIntfDrThe total number of changes into the DR State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.6
ospf3AreaIntfBackupThe total number of changes into the BACKUP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.7
ospf3AreaIntfDrOtherThe total number of changes into the DROTHER State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.8
ospf3AreaIntfAllEventsThe total number of State changes of the interfaces
associated with this OSPF area
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.3.1.9
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4 · 1 row entry · 17 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3AreaErrorStats'
The table of Ospf3 Interface Error Statistics.
ospf3AreaErrorStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1
Error Statistics for an Ospf3 area.
Column Syntax OID
ospf3AreaErrIndexThe index of the Ospf3 Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.1
ospf3AreaErrRxOnPasvThe total number of packets received by all of the interfaces in this area that are
received on a passive interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.2
ospf3AreaErrRxOspfOffThe total number of packets received by all of the interfaces in this area that are
received while OSPF was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.3
ospf3AreaErrRxOnNotupThe total number of packets received by all of the interfaces in this area that are
received while the interface was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.4
ospf3AreaErrRxVerMismatchThe total number of packets received by all of the interfaces in this area that have
an OSPF version number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.5
ospf3AreaErrRxZeroRTRIDThe total number of packets received by all of the interfaces in this area that have
a RouterID of 0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.6
ospf3AreaErrRxSameRTRIDThe total number of packets received by all of the interfaces in this area that have
the same RouterID as this Router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.7
ospf3AreaErrRxMismatchInstIDThe total number of packets received by all of the interfaces in this area that have
an instance number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.8
ospf3AreaErrBadAreaIDThe total number of packets received by all of the interfaces in this area that have
an area number not equal to the one of the area of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.9
ospf3AreaErrBadDestAddrThe total number of packets discarded by all of the interfaces in this area because of
a destination address mismatch.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.10
ospf3AreaErrBadChecksumThe total number of packets discarded by all of the interfaces in this area because of
a bad checksum.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.11
ospf3AreaErrBadNeighbourThe total number of packets discarded by all of the interfaces in this area because
they could not be associated with any neighbor.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.12
ospf3AreaErrBadPktTypeThe total number of packets discarded by all of the interfaces in this area because
the packet type was not recognized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.13
ospf3AreaErrHelloMismatchThe total number of packets received with a different hello interval
by all of the interfaces in this area .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.14
ospf3AreaErrOptionsMismatchThe total number of packets received with a different options
by all of the interfaces in this area .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.15
ospf3AreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.16
ospf3AreaErrHelloNoNbrThe total number of packets received from an unknown neighbor
when all of the interfaces in this area has a Network Type of NBMA or PTOMP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.2.4.1.17
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfRxTxDisdStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IntfRxTxDisdStats'
The table of Ospf3 Intf Rx/Tx Statistics.
ospf3IntfRxTxDisdStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1
Rx Tx packet Statistics about a Ospf3 area.
Column Syntax OID
ospf3IntfRxTxDisdIndexThe index of the ospf3 Intf for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.1
ospf3IntfRxPktsThe total number of Ospf3 packets received on this Ospf3 interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.2
ospf3IntfTxPktsThe total number of Ospf3 packets transmitted on this Ospf3 interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.3
ospf3IntfDisdPktsThe total number of Ospf3 packets discaded on this Ospf3 interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.4
ospf3IntfRxHelloThe total number of Hello packets received on this Ospf3 interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.5
ospf3IntfTxHelloThe total number of Hello packets transmitted on this Ospf3
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.6
ospf3IntfDisdHelloThe total number of Hello packets discaded in this Ospf3
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.7
ospf3IntfRxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.8
ospf3IntfTxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.9
ospf3IntfDisdDatabaseThe total number of Database Description packets discarded
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.10
ospf3IntfRxlsReqsThe total number of Link State Request packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.11
ospf3IntfTxlsReqsThe total number of Link State Request packets transmitted for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.12
ospf3IntfDisdlsReqsThe total number of Link State Request packets discarded for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.13
ospf3IntfRxlsAcksThe total number of Link State Acknowledgement packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.14
ospf3IntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.15
ospf3IntfDisdlsAcksThe total number of Link State Acknowledgement packets discarded
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.16
ospf3IntfRxlsUpdatesThe total number of Link State Update packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.17
ospf3IntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.18
ospf3IntfDisdlsUpdatesThe total number of Link State Update packets discarded for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.1.1.19
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IntfNbrChangeStats'
The table of Ospf3 Interface Neighbour change Statistics.
ospf3IntfNbrChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1
Ospf3 interface Neighbour Change statistics.
Column Syntax OID
ospf3IntfNbrIndexThe index of the Ospf3 Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.1
ospf3IntfNbrDownThe total number of times neighbors now existing on this interface
have changed into DOWN state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.2
ospf3IntfNbrAttemptThe total number of times neighbors now existing on this interface
have changed into ATTEMPT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.3
ospf3IntfNbrInitThe total number of times neighbors now existing on this interface
have changed into INIT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.4
ospf3IntfNbrN2wayThe total number of times neighbors now existing on this interface
have changed into 2WAY state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.5
ospf3IntfNbrExStartThe total number of times neighbors now existing on this interface
have changed into EXSTART state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.6
ospf3IntfNbrExchangeThe total number of times neighbors now existing on this interface
have changed into EXCHANGE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.7
ospf3IntfNbrLoadingThe total number of times neighbors now existing on this interface
have changed into LOADING state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.8
ospf3IntfNbrFullThe total number of times neighbors now existing on this interface
have changed into FULL state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.9
ospf3IntfNbrAllEventsThe total number of times neighbors now existing on this interface
have changed state or an error had occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.2.1.10
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IntfChangeStats'
The table of Ospf3 Interface change Statistics.
ospf3IntfChangeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1
Ospf3 interface Change statistics.
Indexes
Column Syntax OID
ospf3IntfIndexThe index of the Ospf3 Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.1
ospf3IntfDownThe total number of times the interface was down.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.2
ospf3IntfLoopThe total number of times this interface changed State into the LOOP State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.3
ospf3IntfWaitingThe total number of times this interface changed State into the Waiting State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.4
ospf3IntfPtopThe total number of times this interface changed State into the PTOP State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.5
ospf3IntfDrThe total number of times this interface changed State into the DR State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.6
ospf3IntfBackupThe total number of times this interface changed State into the Backup State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.7
ospf3IntfDrOtherThe total number of times this interface changed State into the DrOther State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.8
ospf3IntfAllEventsThe total number of times this interface changed State.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.3.1.9
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4 · 1 row entry · 18 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IntfErrorStats'
The table of Ospf3 Interface Error Statistics.
ospf3IntfErrorStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1
Error Statistics for an Ospf3 interface.
Column Syntax OID
ospf3IntfErrIndexThe index of the Ospf3 Intf for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.1
ospf3IntfErrRxOnPasvThe total number of packets received by this interface that are
received on a passive interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.2
ospf3IntfErrRxOspfOffThe total number of packets received by this interface that are
received while OSPF was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.3
ospf3IntfErrRxOnNotupThe total number of packets received by this interface that are
received while the interface was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.4
ospf3IntfErrRxVerMismatchThe total number of packets received by this interface that have
an OSPF version number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.5
ospf3IntfErrRxZeroRTRIDThe total number of packets received by this interface that have
a RouterID of 0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.6
ospf3IntfErrRxSameRTRIDThe total number of packets received by this interface that have
the same RouterID as this Router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.7
ospf3IntfErrRxMismatchInstIDThe total number of packets received by this interface that have
an instance number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.8
ospf3IntfErrBadAreaIDThe total number of packets received by this interface that have
an area number not equal to the one of the area of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.9
ospf3IntfErrBadDestAddrThe total number of packets discarded by this interface because of
a destination address mismatch.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.10
ospf3IntfErrBadChecksumThe total number of packets discarded by this interface because of
a bad checksum.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.11
ospf3IntfErrBadNeighbourThe total number of packets discarded by this interface because
they could not be associated with any neighbor.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.12
ospf3IntfErrBadPktTypeThe total number of packets discarded by this interface because
the packet type was not recognized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.13
ospf3IntfErrHelloMismatchThe total number of packets received with a different hello interval
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.14
ospf3IntfErrOptionsMismatchThe total number of packets received with a different options
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.15
ospf3IntfErrDeadMismatchThe total number of packets received with a different dead interval
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.16
ospf3IntfErrMTUMismatchThe total number of packets received with a different MTU size
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.17
ospf3IntfErrHelloNoNbrThe total number of packets received from an unknown neighbor
when this interface has a Network Type of NBMA or PTOMP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.22.3.4.1.18
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1 · 1 row entry · 37 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldIfStatsTable'
The table listing the interfaces on which
MLD is enabled.
mldIfStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1
An entry representing an interface stats on
which MLD is enabled.
Column Syntax OID
mldIfStatsIfIndexThe internetwork-layer interface value of the interface
for which MLD msg stats is counted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.1
rxMldIfStatsGeneralQueryThe total number of MLD Listener Queries received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.2
rxMldIfStatsMASQueryThe total number of MLD Listener MAS Queries received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.3
rxMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.4
rxMldIfStatsMLDv1ReportThe total number of MLD Listener Reports (v1) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.5
rxMldIfStatsMLDv1DoneThe total number of MLD Listener Dones (v1/v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.6
rxMldIfStatsMLDv2ReportThe total number of MLD Listener Reports (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.7
rxMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.8
rxMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.9
rxMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.10
rxMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.11
rxMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.12
rxMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.13
txMldIfStatsGeneralQueryThe total number of MLD Listener Queries sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.14
txMldIfStatsMASQueryThe total number of MLD Listener MAS Queries sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.15
txMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.16
txMldIfStatsMLDv1ReportThe total number of MLD Listener Reports (v1) sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.17
txMldIfStatsMLDv1DoneThe total number of MLD Listener Dones (v1/v2) sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.18
txMldIfStatsMLDv2ReportThe total number of MLD Listener Reports (v2) sent.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.19
txMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) sentSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.20
txMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) sentSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.21
txMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) sentSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.22
txMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) sentSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.23
txMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) sentSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.24
txMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) received.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.25
errMldIfStatsGeneralQueryThe total number of MLD Listener Queries errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.27
errMldIfStatsMASQueryThe total number of MLD Listener MAS Queries errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.28
errMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.29
errMldIfStatsMLDv1ReportThe total number of MLD Listener Report (v1) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.30
errMldIfStatsMLDv1DoneThe total number of MLD Listener Done (v1/v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.31
errMldIfStatsMLDv2ReportThe total number of MLD Listener Report (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.32
errMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.33
errMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.34
errMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.35
errMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.36
errMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.37
errMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.23.1.1.38
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSaStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecSaStatsTable'
The (conceptual) table listing all of the IPsec SA statistics.
ipsecSaStatsEntry row .1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1
An entry (conceptual row) representing a IPsec SA statistics.
Column Syntax OID
ipsecSaStatsIndexThe index of ipsecSaStatsEntry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.1
ipsecSaStatsSpiThe SPI used by the SA.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.2
ipsecSaStatsProtoThe proto(AH,ESP,or Both) used by the SA.Enumeration
Enumerated Values:
0any
1ah
2esp
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.3
ipsecSaStatsDstAddrThe destination IP address for the SA.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.4
ipsecSaStatsUsageTimeThe time (in seconds) since the SA was first used.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.5
ipsecSaStatsBytesThe count of bytes for the SA.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.6
ipsecSaStatsPktsThe number of packets sent or received for the SA.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.2.24.1.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipDataRouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipDataRouteInfoTable'
The table of run-time IP routes.
ipDataRouteInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1
A row in the run-time IP route table
Column Syntax OID
ipDataRouteInfoIndxThe index of this route table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.1
ipDataRouteInfoDestIpThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.2
ipDataRouteInfoMaskThe destination IP mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.3
ipDataRouteInfoGatewayThe next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.4
ipDataRouteInfoTagThe tag-type for this route.Enumeration
Enumerated Values:
1fixed
2static
3addr
4rip
5broadcast
6martian
7multicast
8vip
9bgp
10ospf
11none
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.5
ipDataRouteInfoTypeThe type of the route.Enumeration
Enumerated Values:
1indirect
2direct
3local
4broadcast
5martian
6multicast
7other
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.6
ipDataRouteInfoInterfaceThe interface number for which the destination address is applicable.
Loopback interfaces are numbered starting with maximum allowed
IP interfaces +1.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.7
ipDataRouteInfoGateway1The next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.8
ipDataRouteInfoGateway2The next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.9
ipDataRouteInfoMetricThe Metric for this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.1.1.10
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipMgmtRouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipMgmtRouteInfoTable'
The table of run-time IP routes.
ipMgmtRouteInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1
A row in the run-time IP route table
Column Syntax OID
ipMgmtRouteInfoIndxThe index of this route table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.1
ipMgmtRouteInfoDestIpThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.2
ipMgmtRouteInfoMaskThe destination IP mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.3
ipMgmtRouteInfoGatewayThe next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.4
ipMgmtRouteInfoTagThe tag-type for this route.Enumeration
Enumerated Values:
1fixed
2static
3addr
4rip
5broadcast
6martian
7multicast
8vip
9bgp
10ospf
11none
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.5
ipMgmtRouteInfoTypeThe type of the route.Enumeration
Enumerated Values:
1indirect
2direct
3local
4broadcast
5martian
6multicast
7other
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.6
ipMgmtRouteInfoInterfaceThe interface number for which the destination address is applicable.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.7
ipMgmtRouteInfoGateway1The next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.8
ipMgmtRouteInfoGateway2The next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.9
ipMgmtRouteInfoMetricThe Metric for this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.1.3.1.10

arpInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk arpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::arpInfoTable'
The table of ARP entries.
arpInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1
A row in the ARP table
Indexes
Column Syntax OID
arpInfoDestIpThe destination IP address of the ARP entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.1
arpInfoMacAddrThe MAC address for the ARP entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.2
arpInfoVLANThe VLAN identifier for the ARP entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.3
arpInfoSrcPortIndexThe port number on which this entry's equivalence is effective.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.4
arpInfoFlagThe flag associated with this ARP entry.Enumeration
Enumerated Values:
1clear
2unresolved
3permanent
4indirect
5layer4
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.6
arpInfoSrcPortAliasAlias for port number.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.3.3.2.1.1.8
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk arpMgmtInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::arpMgmtInfoTable'
The table of Mgmt ARP entries.
arpMgmtInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1
A row in the ARP table
Column Syntax OID
arpMgmtInfoDestIpThe destination IP address of the ARP entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.1
arpMgmtInfoMacAddrThe MAC address for the ARP entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.2
arpMgmtInfoVLANThe VLAN identifier for the ARP entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.3
arpMgmtInfoSrcPortIndexThe port number on which this entry's equivalence is effective.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.4
arpMgmtInfoFlagThe flag associated with this ARP entry.Enumeration
Enumerated Values:
1clear
2unresolved
3permanent
4indirect
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.5
arpMgmtInfoSrcPortAliasAlias for port number.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.2.3.1.6
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpInfoVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpInfoVirtRtrTable'
The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1
The run-time information about a VRRP virtual router.
Column Syntax OID
vrrpInfoVirtRtrIndexThe VRRP virtual router index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.1
vrrpInfoVirtRtrStateThe VRRP virtual router state.Enumeration
Enumerated Values:
1init
2master
3backup
4holdoff
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.2
vrrpInfoVirtRtrOwnershipThe VRRP virtual router ownership status.Enumeration
Enumerated Values:
1owner
2renter
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.3
vrrpInfoVirtRtrConfigThe status of the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.4
vrrpInfoVirtRtrIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.5
vrrpInfoVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.6
vrrpInfoVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.7
vrrpInfoVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.20301.2.7.16.3.3.3.1.1.8
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfAreaInfoTable'
The table of OSPF Area information.
ospfAreaInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1
Information about a OSPF area.
Column Syntax OID
ospfAreaInfoIndexThe OSPF area number for which the OSPF info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.1
ospfAreaInfoIdThe IP address of the OSPF area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.2
ospfTotalNumberOfInterfacesThe total number of interfaces for this OSPF area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.3
ospfNumberOfInterfacesUpThe number of interfaces UP in area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.4
ospfNumberOfLsdbEntriesThe number of Link State Database entries for this OSPF area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.5
ospfAreaInfoAuthTypeArea authentication.Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.6
ospfAreaInfoLsTypesAcceptedLS types accepted by this area.OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.7
ospfAreaInfoSPFNumber of times SPF algorithm has been executed.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.8
ospfAreaInfoAreaBorderRouterCount of ABR local to this area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.9
ospfAreaInfoASBoundaryRouterCount of ASBR local to this area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.10
ospfAreaInfoTotalNeighboursThe total number of OSPF neighbors.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.11
ospfAreaInfoNeighborsINITstateTotal neighbors in INIT state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.12
ospfAreaInfoNeighborsEXCHstateTotal neighbors in EXCH state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.13
ospfAreaInfoNeighborsFULLstateTotal neighbors in FULL state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.2.1.14
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3 · 1 row entry · 24 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIntfInfoTable'
The table of OSPF Interface information.
ospfIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1
Information about a OSPF interface.
Indexes
Column Syntax OID
ospfIfInfoIndexThe OSPF interface number for which the OSPF info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.1
ospfIfInfoIpAddressThe IP address of the OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.2
ospfIfInfoAreaThe index of the area that the interface belongs.Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.3
ospfIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.4
ospfIfInfoPassivePassive status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.5
ospfIfInfoRouterIPThe router ID of the switch.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.6
ospfIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration
Enumerated Values:
0down
1loopback
2waiting
3ptop
4dr
5backupdr
6drother
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.7
ospfIfInfoPriorityInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.8
ospfIfInfoDesignatedRouterIPThe OSPF Designated Router IP (IP Address) for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.9
ospfIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.10
ospfIfInfoBackupDesignatedRouterIPThe OSPF Backup Designated Router IP for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.11
ospfIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.12
ospfIfInfoHelloThe hello timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.13
ospfIfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.14
ospfIfInfoDeadThe dead timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.15
ospfIfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.16
ospfIfInfoWaitIntervalThe OSPF Wait interval for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.17
ospfIfInfoWaitIntervalMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.18
ospfIfInfoRetransmitThe retransmit interval for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.19
ospfIfInfoTransitDelayThe transit delay for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.20
ospfIfInfoTotalNeighboursThe Total number of neighbours for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.21
ospfIfInfoEventsThe total number of events for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.22
ospfIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.23
ospfIfInfoPtopPoint-to-point status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.4.3.1.24
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4 · 1 row entry · 19 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfVirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfVirtIntfInfoTable'
The table of OSPF virtual interfaces information.
ospfVirtIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1
Information about an OSPF virtual interface.
Column Syntax OID
ospfVirtIntfInfoIndexThe OSPF Virtual Interface number for which this table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.1
ospfVirtIntfInfoIpAddrThe IP Address of this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.2
ospfVirtIntfInfoAreaThe index of the OSPF area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.3
ospfVirtIntfInfoRouterIdThe Router ID.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.4
ospfVirtIntfInfoStateState
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.5
ospfVirtIntfInfoCostThe cost of the virtual interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.6
ospfVirtIntfInfoTransThe transit delay for the virtual interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.7
ospfVirtIntfInfoHelloHello interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.8
ospfVirtIntfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.9
ospfVirtIntfInfoDeadDead interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.10
ospfVirtIntfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.11
ospfVirtIntfInfoWaitWait interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.12
ospfVirtIntfInfoWaitMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.13
ospfVirtIntfInfoRetraRetransmit interval.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.14
ospfVirtIntfInfoAuthAuthentication.OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.15
ospfVirtIntfInfoEventsEvents.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.16
ospfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.17
ospfVirtIntfInfoNbrStateState
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)
Enumeration
Enumerated Values:
0down
1attempt
2init
3twoway
4exstart
5exchange
6loading
7full
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.18
ospfVirtIntfInfoAreaIdThe AreaId of the virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.4.1.19
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfIfNbrTable'
The table of OSPF Interface Neighbor information.
ospfIfNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1
Information about a OSPF interface, neighbor pair.
Column Syntax OID
ospfIfNbrIntfIndexThe OSPF Interface number for which this Interface/Nbr table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.1
ospfIfNbrIpAddrThe OSPF Neighbor ID .SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.2
ospfIfNbrPriorityThe priority of the OSPF neighbor.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.3
ospfIfNbrStateThe state of the OSPF neighbor.Enumeration
Enumerated Values:
1down
2attempt
3init
4twoway
5exStart
6exchange
7loading
8full
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.4
ospfIfNbrDesignatedRtrThe IP Address of the Designated Router for this OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.5
ospfIfNbrBackupDesignatedRtrThe IP Address of the backup designated Router for this OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.6
ospfIfNbrIpAddressThe IP Address of the OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.5.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfSumRangesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfSumRangesInfoTable'
The table of OSPF summary ranges information.
ospfSumRangesInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1
Summary ranges information.
Column Syntax OID
ospfSumRangesInfoIndexThe OSPF range index for which this table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.1
ospfSumRangesInfoAreaArea.Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.2
ospfSumRangesInfoNetworkNetwork.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.3
ospfSumRangesInfoMaskMask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.4
ospfSumRangesInfoActionAction
propagate(0),
hide(1)
Enumeration
Enumerated Values:
0propagate
1hide
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.5
ospfSumRangesInfoListTypeSummary address list
Non-NSSA(0),
NSSA(1)
Enumeration
Enumerated Values:
0non-nssa
1nssa
.1.3.6.1.4.1.20301.2.7.16.3.3.4.6.1.6
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfRoutesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfRoutesInfoTable'
The table of OSPF routes information.
ospfRoutesInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1
OSPF routes information.
Column Syntax OID
ospfRoutesInfoIndexThe OSPF route table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1.1
ospfRoutesInfoDestinationDestination.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1.2
ospfRoutesInfoMaskMask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1.3
ospfRoutesInfoViaNext hop.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1.4
ospfRoutesInfoTypeRoute type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - best
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.3.3.4.7.1.5
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfLsdbInfoTable'
The OSPF Process's Link State Database.
ospfLsdbInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1
A single Link State Advertisement.
Column Syntax OID
ospfLsdbInfoIndexThe 32 bit index in the table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.1
ospfLsdbInfoAreaIdThe 32 bit identifier of the Area from which
the LSA was received.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.2
ospfLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.3
ospfLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.4
ospfLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.5
ospfLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 10-10
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.6
ospfLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.7
ospfLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.8
ospfLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header. When the LSA is invalid, it is
message string 'Invalid LSDB'.
OctetString
Constraints:
range: 36-36
.1.3.6.1.4.1.20301.2.7.16.3.3.4.8.1.9
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfExtLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfExtLsdbInfoTable'
The OSPF Process's Links State Database.
ospfExtLsdbInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1
A single Link State Advertisement.
Column Syntax OID
ospfExtLsdbInfoIndexThe 32 bit index in the table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.1
ospfExtLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
5asExternalLink
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.2
ospfExtLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.3
ospfExtLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.4
ospfExtLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 10-10
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.5
ospfExtLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.6
ospfExtLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.7
ospfExtLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 36-36
.1.3.6.1.4.1.20301.2.7.16.3.3.4.9.1.8
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10 · 1 row entry · 24 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfLoopIfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospfLoopIfInfoTable'
The table of OSPF Loopback Interface information.
ospfLoopIfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1
Information about a OSPF loopback interface.
Column Syntax OID
ospfLoopIfInfoIndexThe OSPF loopback interface number
for which the OSPF info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.1
ospfLoopIfInfoIpAddressThe IP address of the OSPF loopback interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.2
ospfLoopIfInfoAreaThe index of the area that the loopback interface belongs.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.3
ospfLoopIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.4
ospfLoopIfInfoPassivePassive status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.5
ospfLoopIfInfoRouterIPThe router ID of the switch.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.6
ospfLoopIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration
Enumerated Values:
0down
1loopback
2waiting
3ptop
4dr
5backupdr
6drother
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.7
ospfLoopIfInfoPriorityInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.8
ospfLoopIfInfoDesignatedRouterIPThe OSPF Designated Router IP (IP Address) for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.9
ospfLoopIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.10
ospfLoopIfInfoBackupDesignatedRouterIPThe OSPF Backup Designated Router IP for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.11
ospfLoopIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.12
ospfLoopIfInfoHelloThe hello timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.13
ospfLoopIfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.14
ospfLoopIfInfoDeadThe dead timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.15
ospfLoopIfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.16
ospfLoopIfInfoWaitIntervalThe OSPF Wait interval for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.17
ospfLoopIfInfoWaitIntervalMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0seconds
1milliseconds
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.18
ospfLoopIfInfoRetransmitThe retransmit interval for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.19
ospfLoopIfInfoTransitDelayThe transit delay for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.20
ospfLoopIfInfoTotalNeighboursThe Total number of neighbours for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.21
ospfLoopIfInfoEventsThe total number of events for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.22
ospfLoopIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.23
ospfLoopIfInfoPtopPoint-to-point status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.4.10.1.24
.1.3.6.1.4.1.20301.2.7.16.3.3.5.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk gatewayInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::gatewayInfoTable'
The table containing information for the default gateways.
gatewayInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.5.1.1
A row in the gateway information table
Column Syntax OID
gatewayInfoIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.5.1.1.1
gatewayInfoAddrThe IP address of the default gateway.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.5.1.1.2
gatewayInfoStatusThe status of the default gateway.Enumeration
Enumerated Values:
1up
2failed
.1.3.6.1.4.1.20301.2.7.16.3.3.5.1.1.4
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpInfoTable'
The table of IGMP group membership information.
igmpInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1
Information about an IGMP group member .
Indexes
Column Syntax OID
igmpInfoIndexThe igmp group number for which the IGMP info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.1
igmpInfoGroupIdThe IP address of the IGMP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.2
igmpInfoVlanIdThe VLAN ID for this IGMP group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.3
igmpInfoSrcTrunkThe downstream trunk number.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.4
igmpInfoSrcPortIndexThe downstream port number.PortNumber.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.5
igmpInfoVersionThe Version of IGMP host.Enumeration
Enumerated Values:
1v3
2v2
3v1
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.6
igmpInfoExpiresThe expiration time for this host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.7
igmpInfoModeThe IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2).
Enumeration
Enumerated Values:
1exclude
2include
3na
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.8
igmpInfoSourceIpThe source IP address of the IGMP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.9
igmpInfoFwdThe IGMPv3 forwarding for this source/group IP for this host.Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.10
igmpInfoGrpExpiresThe expiration time for the group.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.11
igmpInfoSrcPortAliasThe downstream port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.1.1.12
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpMrtrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::igmpMrtrInfoTable'
The table of IGMP mrouters.
igmpMrtrInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1
Information about an IGMP mrouter.
Column Syntax OID
igmpMrtrInfoIndexThe mrouter number for which the IGMP mrouter info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.1
igmpMrtrInfoVlanIdThe VLAN ID on which this IGMP mrouter is attached.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.2
igmpMrtrInfoPortIdThe port/portchannel alias on which this IGMP mrouter is attached.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.3
igmpMrtrInfoVersionThe version of this IGMP mrouter.Enumeration
Enumerated Values:
1v1
2v2
3v3
4pim
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.4
igmpMrtrInfoExpiresThe expiration time for this mrouter.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.5
igmpMrtrInfoMrtThe Maximum Query Response time of this IGMP mrouter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.6
igmpMrtrInfoQrvThe Querier Robustness value of this IGMP mrouter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.7
igmpMrtrInfoQqicThe Querier query interval code of this IGMP mrouter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.8
igmpMrtrInfoSrcIpThe Source IP of this IGMP mrouter.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.10
igmpMrtrInfoPortAliasThe port/portchannel alias on which this IGMP mrouter is attached.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.6.2.1.11
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipIntfInfoTable'
The table of IP interface information.
intfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1
A row in IP interface information table.
Indexes
Column Syntax OID
intfInfoIndexThe interface number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.1
intfInfoAddrThe IP address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.3
intfInfoNetMaskThe subnet mask of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.4
intfInfoBcastAddrThe broadcast address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.5
intfInfoVlanThe VLAN number for this interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.6
intfInfoStatusThe status of the interface.Enumeration
Enumerated Values:
1up
2down
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.9.1.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk rip2InfoIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::rip2InfoIntfTable'
The information table of RIP.
ripInfoIntfEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1
Information about RIP on IP interface.
Column Syntax OID
ripInfoIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.1
ripInfoIntfVersionRIP version.Enumeration
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.2
ripInfoIntfAddressThe interface address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.3
ripInfoIntfStateThe status of RIP protocol.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.4
ripInfoIntfListenThe status of listening to route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.5
ripInfoIntfTrigUpdateThe status of triggered updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.6
ripInfoIntfMcastUpdateThe status of multicast updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.7
ripInfoIntfPoisonReverseThe status of RIP poison reverse.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.8
ripInfoIntfSupplyThe status of supplying route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.9
ripInfoIntfMetricRIP route metric for this interface.Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.10
ripInfoIntfAuthThe type of Authentication used on this interface.Enumeration
Enumerated Values:
1none
2password
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.11
ripInfoIntfKeyRIP update authentication password.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.12
ripInfoIntfDefaultSpecifies what RIP does with default routes.Enumeration
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.20301.2.7.16.3.3.10.2.1.13
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk rip2InfoRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::rip2InfoRtrTable'
The routing information table of RIP.
ripInfoRtrEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1
Information about RIP routes.
Indexes
Column Syntax OID
ripInfoRtrIndexThe index number of RIP route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1.1
ripInfoRtrDestIpThe destination ip address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1.2
ripInfoRtrMaskThe destination ip mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1.3
ripInfoRtrGatewayThe next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1.4
ripInfoRtrMetricThe metric for this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.10.3.1.10
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1 · 1 row entry · 18 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoPeerTable'
The table of BGP peer in the current configuration block.
bgpInfoPeerEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1
Information about a BGP peer.
Column Syntax OID
bgpInfoPeerIndexThe BGP peer number for which the BGP peer table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.1
bgpInfoPeerRemoteAddrThe remote IP address of the BGP peer.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.2
bgpInfoPeerVersionThe version negotiated by the BGP peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.3
bgpInfoPeerTtlThe time-to-live value of the BGP peer IP datagram.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.4
bgpInfoPeerRemoteAsThe remote IP address of the BGP peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.5
bgpInfoPeerRouterIdThe router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.6
bgpInfoPeerStateThe BGP status.Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.7
bgpInfoPeerLastStateThe BGP old status.Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.8
bgpInfoTotalReceivedPacketsThe total number of received packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.9
bgpInfoTotalSentPacketsThe total number of sent packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.10
bgpInfoReceivedUpdatesThe number of received updates.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.11
bgpInfoSentUpdatesThe number of sent updates.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.12
bgpInfoKeepaliveThe keep alive time.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.13
bgpInfoHoldtimeThe hold time.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.14
bgpInfoMinAdvTimeThe MinAdvTime.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.15
bgpInfoLastErrorCodeThe last error code.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.16
bgpInfoLastErrorSubCodeThe last error subcode.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.17
bgpInfoEstTransitionsThe established state transitions.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.1.1.18
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoSummaryTable'
The table of BGP Peer Information.
bgpInfoSummaryEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1
Information about a BGP Peer.
Column Syntax OID
bgpInfoSummaryIndexThe BGP Peer number for which the BGP Peer table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.1
bgpInfoSummaryRemoteAddrThe remote IP address of the BGP Peer.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.2
bgpInfoSummaryVersionThe version negotiated by the BGP Peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.3
bgpInfoSummaryRemoteAsThe Remote AS.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.4
bgpInfoSummaryStateThe BGP status.Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.5
bgpInfoSummaryTotalReceivedPacketsThe total number of received packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.6
bgpInfoSummaryTotalSentPacketsThe total number of sent packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.2.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoRtrTable'
The table of BGP router run-time information
bgpInfoRtrTableEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1
The run-time information about a BGP router
Indexes
Column Syntax OID
bgpInfoIndexThe BGP router index which is the network address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.1
bgpInfoNetworkThe BGP network address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.2
bgpInfoNextHopThe BGPs NextHop addresses from a network.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.3
bgpInfoMetrThe BGPs metric from a network.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.4
bgpInfoLcPrfThe BGPs local preference from a network.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.5
bgpInfoWghtTotal weight of AS paths from a network.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.6
bgpInfoPathThe AS paths from a network.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.7
bgpInfoOriginThe BGPs route origin from a networkSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.8
bgpInfoMaskThe BGP router subnet mask.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.3.1.9
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoGroupTable'
The table of BGP group in the current configuration block.
bgpInfoGroupEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1
Information about a BGP group.
Column Syntax OID
bgpInfoGroupIndexThe BGP group number for which the BGP group table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.1
bgpInfoGroupNameThe BGP group nname for which the BGP group table is related.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.2
bgpInfoGroupRemoteAddrThe remote IP address of the BGP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.3
bgpInfoGroupRemoteMaskThe remote mask of the BGP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.4
bgpInfoGroupLimitThe maximum number of BGP dynamic peers.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.5
bgpInfoGroupPeersNumThe total number of BGP dynamic peers.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.6
bgpInfoGroupStateBGP group state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.11.4.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.11.5 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoGroupRASTable'
The table of BGP group RASs in the current configuration block.
bgpInfoGroupRASEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.5.1
Information about a BGP group RAS.
Column Syntax OID
bgpInfoGroupRASIndexThe BGP group RAS number for which the BGP group RAS table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.5.1.1
bgpInfoGroupRASThe remote AS number of the BGP group bgpInfoGroupIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.5.1.2
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoDynamicPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::bgpInfoDynamicPeerTable'
The table of BGP dynamic peers.
bgpInfoDynamicPeerEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1
Information about a BGP dynamic peer.
Column Syntax OID
bgpInfoDynamicPeerIndexThe BGP dynamic peer number for which the BGP peer table
is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.1
bgpInfoDynamicPeerRemoteAddrThe remote IP address of the BGP dynamic peer.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.2
bgpInfoDynamicPeerGroupThe group of BGP dynamic peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.3
bgpInfoDynamicPeerVersionThe version negotiated by the BGP dynamic peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.4
bgpInfoDynamicPeerTtlThe time-to-live value of the BGP dynamic peer IP datagram.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.5
bgpInfoDynamicPeerRemoteAsThe remote AS number of the BGP dynamic peer.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.6
bgpInfoDynamicPeerRouterIdThe router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.7
bgpInfoDynamicTotalReceivedPacketsThe total number of received packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.8
bgpInfoDynamicTotalSentPacketsThe total number of sent packets.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.9
bgpInfoDynamicReceivedUpdatesThe number of received updates.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.10
bgpInfoDynamicSentUpdatesThe number of sent updates.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.11
bgpInfoDynamicKeepaliveThe keep alive time.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.12
bgpInfoDynamicHoldtimeThe hold time.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.13
bgpInfoDynamicMinAdvTimeThe MinAdvTime.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.11.6.1.14

nbrInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nbrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nbrInfoTable'
The table of nbrcache information.
nbrInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1
Information about neighbor discovery protocol.
Indexes
Column Syntax OID
nbrInfoIndexThe index of the nbrcache entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.1
nbrInfoDestIpThe destination IP address of the nbrcache entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.2
nbrInfoStateThe state of the nbrcache entry.Enumeration
Enumerated Values:
1static
2reach
3incomplete
4stale
5delay
6probe
7unknown
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.3
nbrInfoMacAddrThe MAC address for the nbrcache entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.4
nbrInfoVlanIdThe VLAN identifier for the nbrcache entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.5
nbrInfoPortNumThe port number on which this entry's equivalence is effective.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.6
nbrInfoAgeThe used time for the nbrcache entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.7
nbrInfoInterfaceThe interface number for which the destination address is applicable.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.8
nbrInfoPortAliasAlias for port number.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.3.3.12.1.1.9
.1.3.6.1.4.1.20301.2.7.16.3.3.13.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk gatewayIPv6InfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::gatewayIPv6InfoTable'
The table containing information for the IPv6 default gateways.
gatewayIPv6InfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.13.1.1
A row in the IPv6 gateway information table
Column Syntax OID
ipGatewayIPv6InfoIndexThe IPv6 gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.13.1.1.1
ipGatewayIPv6InfoAddrThe IP address for the IPv6 default gateway.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.13.1.1.2
ipGatewayIPv6InfoStateThe state for the IPv6 Default Gateway.Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.2.7.16.3.3.13.1.1.3
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipRoute6InfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipRoute6InfoTable'
The table of run-time IP6 routes.
ipRoute6InfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1
A row in the run-time IP6 route table.
Column Syntax OID
ipRoute6InfoIndxThe index of this route6 table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.1
ipRoute6InfoDestIpThe destination of the route.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.2
ipRoute6InfoPrefLenThe destination prefix length of the route.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.3
ipRoute6InfoInterfaceThe interface of the route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.4
ipRoute6InfoNextHopThe next hop of the route.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.5
ipRoute6InfoProtoThe protocol type of the route.Enumeration
Enumerated Values:
2local
3static
4nbrdis
5ripng
6ospf
10intmgmt
11extmgmt
12intmgmtND
13extmgmtND
.1.3.6.1.4.1.20301.2.7.16.3.3.14.1.1.6
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipIntfLoopbackInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipIntfLoopbackInfoTable'
The table of IP Loopback interface information.
intfLoopbackInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1
A row in IP Loopback interface information table.
Column Syntax OID
intfLoopbackInfoIndexThe Loopback interface number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1.1
intfLoopbackInfoAddrThe IP address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1.3
intfLoopbackInfoNetMaskThe subnet mask of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1.4
intfLoopbackInfoBcastAddrThe broadcast address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1.5
intfLoopbackInfoStatusThe status of the interface.Enumeration
Enumerated Values:
1up
2down
3disabled
.1.3.6.1.4.1.20301.2.7.16.3.3.16.1.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3AreaInfoTable'
The table of OSPFv3 Area information.
ospf3AreaInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1
Information about a OSPFv3 area.
Column Syntax OID
ospf3AreaInfoIndexThe OSPFv3 area number for which the OSPFv3 info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.1
ospf3AreaInfoIdThe IP address of the OSPFv3 area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.2
ospf3AreaInfoStatusArea Status:
active(1), notInService(2), notReady(3).
Enumeration
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.3
ospf3TotalNumberOfInterfacesThe total number of interfaces for this OSPFv3 area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.4
ospf3NumberOfInterfacesUpThe number of interfaces UP in area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.5
ospf3AreaInfoSPFThe number of times SPF ran.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.6
ospf3NumberOfLsdbEntriesThe total number of Area-scope link state
advertisements in this area's link state
database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.7
ospf3AreaInfoAreaBorderRouterThe Area Border Router count.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.8
ospf3AreaInfoASBoundaryRouterThe AS Boundary Router count.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.9
ospf3AreaInfoNeighborsFULLstateTotal neighbors in FULL state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.10
ospf3AreaInfoVirtNeighborsFULLstateTotal neighbors in FULL state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.2.1.11
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3 · 1 row entry · 30 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IntfInfoTable'
The table of OSPFv3 Interface information.
ospf3IntfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1
Information about a OSPFv3 interface.
Column Syntax OID
ospf3IfInfoIndexThe OSPFv3 interface number for which the OSPFv3 info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.1
ospf3IfInfoInstanceIDThe OSPFv3 interface instance id.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.2
ospf3IfInfoLLocalAddressThe IP address of the OSPFv3 interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.3
ospf3IfInfoAreaIDThe AreaID of the area that the interface belongs.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.4
ospf3IfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.5
ospf3IfInfoPassivePassive status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.6
ospf3IfInfoNetworkTypeNetwork type of the interface:
broadcast(1),nbma(2),pointToPoint(3),pointToMultipoint(5).
Enumeration
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.7
ospf3IfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
8standby
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.8
ospf3IfInfoPriorityInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.9
ospf3IfInfoDesignatedRouterIDThe OSPFv3 Designated Router ID for this OSPFv3 interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.10
ospf3IfInfoBackupDesignatedRouterIDThe OSPFv3 Backup Designated Router ID for this OSPFv3
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.11
ospf3IfInfoHelloThe hello timer for this OSPF3 interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.12
ospf3IfInfoDeadThe dead timer for this OSPFv3 interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.13
ospf3IfInfoPollThe OSPFv3 Poll interval for this OSPFv3 interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.14
ospf3IfInfoRetransmitThe retransmit interval for this OSPFv3 interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.15
ospf3IfInfoTransitDelayThe transit delay for this OSPFv3 interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.16
ospf3IfInfoTotalNeighboursThe total number of neighbours for this OSPFv3 interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.17
ospf3IfInfoEventsThe total number of events for this OSPF3 interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.18
ospf3IfInfoMetricCostThe cost of this OSPF3 interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.19
ospf3IfInfoAuthSpiAuthentication Spi Id(256 - 4294967295)Unsigned32
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.20
ospf3IfInfoAuthEnableAuthentication Status
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.21
ospf3IfInfoAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.22
ospf3IfInfoAuthKeyAuthentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.23
ospf3IfInfoEncrySpiEncryption Spi Id(256 - 4294967295)Unsigned32
Constraints:
range: 256-4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.24
ospf3IfInfoEncryEnableEncryption Status
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.25
ospf3IfInfoEncryTypeEncryption Authentication Type
null(0),
aes(3)
Enumeration
Enumerated Values:
0null
3aes
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.26
ospf3IfInfoEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
OctetString
Constraints:
range: 4-48
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.27
ospf3IfInfoEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Enumerated Values:
0none
1sha1
2md5
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.28
ospf3IfInfoEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Constraints:
range: 4-40
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.29
ospf3IfInfoLsaSupressLsa supression status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.3.3.18.3.1.30
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3VirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3VirtIntfInfoTable'
The table of OSPFv3 Virtual Interface information.
ospf3VirtIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1
Information about a single virtual interface.
Column Syntax OID
ospf3VirtIfInfoIndexThe OSPFv3 virtual interface number for which the OSPFv3
info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.1
ospf3VirtIfInfoAreaIdThe transit area that the virtual link
traverses. By definition, this is not
Area 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.2
ospf3VirtIfInfoNeighborThe Router ID of the virtual neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.3
ospf3VirtIfInfoTransitDelayThe estimated number of seconds it takes to
transmit a Link State Update packet over this
interface.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.5
ospf3VirtIfInfoRetransIntervalThe number of seconds between link state
advertisement retransmissions for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State Request packets. This…
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.6
ospf3VirtIfInfoHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.7
ospf3VirtIfInfoRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neig…
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.8
ospf3VirtIfInfoStateOSPF virtual interface states.Enumeration
Enumerated Values:
1down
4pointToPoint
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.9
ospf3VirtIfInfoEventsThe number of state changes or error events on
this virtual link.

Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by th…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.10
ospf3VirtIfInfoStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.11
ospf3VirtIfInfoLinkScopeLsaCountThe total number of Link-scope link state
advertisements in this virtual link's link state
database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.12
ospf3VirtIfInfoLinkLsaCksumSumThe 32-bit unsigned sum of the Link-scope link state
advertisements' LS checksums contained in this
virtual link's link state database. The sum can be used
to determine if there has been a change in a
router's link sta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.4.1.13
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3IfNbrTable'
The table of OSPFv3 Interface Neighbor information.
ospf3IfNbrEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1
Information about a OSPFv3 interface, neighbor pair.
Column Syntax OID
ospf3IfNbrInfoIndexThe OSPFv3 neighbor table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.1
ospf3IfNbrIntfIndexThe OSPFv3 Interface number for which this Nbr table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.2
ospf3IfNbrIntfInstanceIDThe OSPFv3 Interface instance id for which this Nbr table is
related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.3
ospf3IfNbrRtrIDA 32-bit unsigned integer uniquely identifying the
neighboring router in the Autonomous System.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.4
ospf3IfNbrIpAddressThe IPv6 address of the neighbor associated with
the local link.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.5
ospf3IfNbrPriorityThe priority of the OSPFv3 neighbor.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.6
ospf3IfNbrStateThe state of the relationship with this
neighbor.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.7
ospf3IfNbrEventsThe number of times this neighbor relationship
has changed state or an error has occurred.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.5.1.8
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3RoutesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ospf3RoutesInfoTable'
The table of OSPFv3 routes information.
ospf3RoutesInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1
OSPFv3 routes information.
Column Syntax OID
ospf3RoutesInfoIndexThe OSPFv3 route table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.1
ospf3RoutesInfoDestinationThe Destination IPv6 Address of this route.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.2
ospf3RoutesInfoPrefixLenIndicates the prefix length of the destination Address.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.3
ospf3RoutesInfoNextHopNext Hop IPv6 Address for this route. For direct routes it has the
value ::0.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.4
ospf3RoutesInfoTypeType of the routeEnumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.5
ospf3RoutesInfoAreaIdArea ID associated with the routeSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.6
ospf3RoutesInfoCostIt is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
Integer32
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.7
ospf3RoutesInfoType2CostType 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates…
Integer32
Constraints:
range: 1-16777215
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.8
ospf3RoutesInfoInterfaceIndexInterface Index associated with the routeInteger32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.18.6.1.9
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipRouteEcmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipRouteEcmpInfoTable'
The table of run-time IP routes.
ipRouteEcmpInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1
A row in the run-time IP route table
Column Syntax OID
ipRouteEcmpInfoDestIndxThe index of unique destinations IP.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.1
ipRouteEcmpInfoGwIndxThe index of the gateway per destination.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.2
ipRouteEcmpInfoDestThe destination IP of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.3
ipRouteEcmpInfoMaskThe destination IP mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.4
ipRouteEcmpInfoGatewayThe next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.5
ipRouteEcmpInfoInterfaceThe interface for the next-hop.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.6
ipRouteEcmpInfoGwStatusThe Up/Down status of the gatewayEnumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.20301.2.7.16.3.3.19.1.1.7
.1.3.6.1.4.1.20301.2.7.16.3.3.21.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipv6PmtuInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipv6PmtuInfoTable'
The table of Ipv6 PMTU entries.
ipv6PmtuInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.21.1.1
A row in the ipv6 PMTU entries table.
Column Syntax OID
ipv6PmtuInfoIndxThe index of this ipv6 PMTU table entries.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.21.1.1.1
ipv6PmtuInfoDestIpThe destination of the pMTU.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.21.1.1.2
ipv6PmtuInfoSinceTimeThe addubt time of the pMTU.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.21.1.1.3
ipv6PmtuInfoValueThe vlaue of this ipv6 PMTU table entries.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.21.1.1.4
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldInfoGroupsTable'
The table listing the IPv6 multicast
groups for which there are members on a particular interface.
mldInfoGroupEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1
An entry in the mldInfoGroupsTable
Indexes
Column Syntax OID
mldInfoGroupIfIndexThe internetwork-layer interface for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.1
mldInfoGroupAddressThe IPv6 multicast group address for which this entry
contains information. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.2
mldInfoGroupPortNumberThe port number for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.3
mldInfoGroupVlanIDThe VLAN ID for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.4
mldInfoGroupLastReporterThe IPv6 address of the source of the last membership
report received for this IPv6 Multicast group address on
this interface. If no membership report has been
received, this object has the value 00:0:00:00:00:00:00:00…
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.5
mldInfoGroupSourceONLY for MLDv2. The IPv6 address for which the this entry's
filter is applied. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.6
mldInfoGroupFilterTypeONLY for MLDv2. The filter type for the specified source.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.7
mldInfoGroupExpiryTimeThe minimum amount of time remaining before this entry
will be aged out. A value of 0 indicates that the entry
is only present because mldCacheSelf is true and that if
the router left the group, this entry would be age…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.8
mldInfoGroupVersionThe version of this MLD entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.9
mldInfoGroupFwdSpecifies if forwarding is enabled for this entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.10
mldInfoGroupIdMLD group index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.11
mldInfoGroupPortAliasThe port alias for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.1.1.12
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoMRoutersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldInfoMRoutersTable'
The table listing the IPv6 multicast routers on an interface.
mldInfoMRouterEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1
An entry in the mldInfoMRoutersTable
Column Syntax OID
mldInfoMRouterIfIndexThe interface on which the multicast router is learnt.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.1
mldInfoMRouterSrcIpThe multicast router's ip.INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.2
mldInfoMRouterPortNumberThe port on which the multicast router is learnt.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.3
mldInfoMRouterVlanThe vlan in which the multicast router is learnt.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.4
mldInfoMRouterQrvThis multicast router's Maximum Response DelaySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.5
mldInfoMRouterQqicONLY for MLDv2. This multicast router's QQICSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.6
mldInfoMRouterMaxRespDelayThis multicast router's Maximum Response Delay.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.7
mldInfoMRouterVersionThis multicast router's MLD version.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.8
mldInfoMRouterExpiryTimeThis multicast router's expiry time.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.9
mldInfoMRouterIdThis multicast router's index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.10
mldInfoMRouterPortAliasThe port alias on which the multicast router is learnt.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.2.1.11
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mldInfoInterfaceTable'
The (conceptual) table listing the informatio of interfaces on which
MLD is enabled.
mldInfoInterfaceEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1
An entry (conceptual row) representing the information of an
interface on which MLD is enabled.
Column Syntax OID
mldInfoInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.1
mldInfoInterfaceStateThe internetwork-layer interface value of the interface
for which MLD is enabled.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.2
mldInfoInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.3
mldInfoInterfaceQuerierStatusSpecifies if the switch is Querier or notSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.4
mldInfoInterfaceQuerierThe address of the MLD Querier on the IPv6 subnet to
which this interface is attached.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.5
mldInfoInterfaceQuerierExpiryTimeThe time remaining before the Other Querier Present
Timer expires. If the local system is the querier,
the value of this object is zero.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.6
mldInfoInterfaceQuerierPortIndexThe port on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.7
mldInfoInterfaceGroupsThe current number of entries for this interface in the
Cache Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.8
mldInfoInterfaceQuerierPortAliasThe port alias on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.3.3.22.4.1.9
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1 · 1 row entry · 12 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecSaInfoTable'
The (conceptual) table listing all of the IPsec SA information.
ipsecSaInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1
An entry (conceptual row) representing a IPsec SA information.
Column Syntax OID
ipsecSaInfoIndexThe index of ipsecSaInfoEntry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.1
ipsecSaInfoSpiThe SPI used by the SA.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.2
ipsecSaInfoProtoThe proto(AH,ESP,or Both) used by the SA.Enumeration
Enumerated Values:
0any
50esp
51ah
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.3
ipsecSaInfoDstAddrThe destination IP address for the SA.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.4
ipsecSaInfoSrcAddrThe source IP address for the SA.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.5
ipsecSaInfoFlagsThe direction, initiator and etc for an SA; see flag constants below:
SA_FLAG_INUSE 0x0001
SA_FLAG_DELETED 0x0002
SA_FLAG_INBOUND 0x0004
SA_FLAG_INITIATOR 0x0008
SA_FLAG_MATURE 0x0010
…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.6
ipsecSaInfoUlpThe upper layer protocol for an SA; 0=any; see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.7
ipsecSaInfoModeThe mode for the SA.Enumeration
Enumerated Values:
0any
1transport
2tunnel
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.8
ipsecSaInfoAuthAlgThe authentication algorithm for the SA.Enumeration
Enumerated Values:
0any
1md5
2sha1
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.9
ipsecSaInfoAuthKeyThe authentication key for the SA.OctetString
Constraints:
range: 20-64
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.10
ipsecSaInfoEncrAlgThe encryption algorithm for the SA.Enumeration
Enumerated Values:
0any
1des
2triple-des
3blowfish
4aes
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.11
ipsecSaInfoEncrKeyThe encryption key for the SA.OctetString
Constraints:
range: 20-64
.1.3.6.1.4.1.20301.2.7.16.3.3.23.1.1.12
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSpdInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecSpdInfoTable'
The (conceptual) table listing all of the IPsec security policy information.
ipsecSpdInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1
An entry (conceptual row) representing a IPsec security policy information.
Column Syntax OID
ipsecSpdInfoIndexThe index of ipsecSpdInfoEntry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.1
ipsecSpdInfoFlagsThe direction, initiator and etc for an SA; see flag constants below:
SP_FLAG_INUSE 0x00000001
SP_FLAG_DELETED 0x00000002
SP_FLAG_INBOUND 0x00000004
SP_FLAG_MIRRORED 0x00000008

SP…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.2
ipsecSpdInfoULPThe transport layer protocol for the SA. 0 = any. see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.3
ipsecSpdInfoActionThe IPsec action for the SA.Enumeration
Enumerated Values:
1drop
2apply
3permit
4bypass
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.4
ipsecSpdInfoDstAddrThe destination IP address for the SA.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.5
ipsecSpdInfoSrcAddrThe source IP address for the SA.OctetString
Constraints:
range: 16-16
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.6
ipsecSpdInfoModeThe mode for the SA.Enumeration
Enumerated Values:
0any
1transport
2tunnel
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.7
ipsecSpdInfoSaSizeThe SA bundle size of an Security policy.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.2.1.8
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSpdInfoSaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ipsecSpdInfoSaTable'
The (conceptual) table listing all information of the SA nested in an IPsec security policy.
ipsecSpdInfoSaEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1
An entry (conceptual row) representing a SA information netsted in an IPsec security policy.
Column Syntax OID
ipsecSpdInfoSaIndexThe index that enumerates the IPsec nested SAs .SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1.1
ipsecSpdInfoSaSecuProtoThe security protocol for the SA.Enumeration
Enumerated Values:
0ah
1esp
2esp-auth
3esp-null
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1.2
ipsecSpdInfoSaAuthAlgThe hash algorithm used by the SA.Enumeration
Enumerated Values:
0any
1md5
2sha1
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1.3
ipsecSpdInfoSaEncrAlgThe encryption algorithm used by the SA.Enumeration
Enumerated Values:
0any
1des
2triple-des
3blowfish
4aes
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1.4
ipsecSpdInfoSaEncrKeyLenThe encryption key length of an nested SA.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.23.3.1.5
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingBindingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::dhcpSnoopingBindingInfoTable'
DHCP Snooping binding Table.
dhcpSnoopingBindingInfoEntry row .1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1
A row in the DHCP Snooping binding Table
Column Syntax OID
dhcpSnoopingBindingInfoIndexIndex of this DHCP Snooping binding entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.1
dhcpSnoopingBindingInfoMacMac Address of this DHCP Snooping binding entry.OctetStringr/w.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.2
dhcpSnoopingBindingInfoIpIp Address of this DHCP Snooping binding entry.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.3
dhcpSnoopingBindingInfoVLANVLAN ID of this DHCP Snooping binding entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.4
dhcpSnoopingBindingInfoPortIndexPort Number of this DHCP Snooping binding entry.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.5
dhcpSnoopingBindingInfoExpiryThe lease time of this DHCP Snooping binding entry.
Set 0 to remove this entry
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.6
dhcpSnoopingBindingInfoTypeShow How this DHCP Snooping binding entry come from.Enumerationr/w
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.7
dhcpSnoopingBindingInfoPortAliasAlias for port Number of this DHCP Snooping binding entry.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.20301.2.7.16.3.3.24.1.1.8
.1.3.6.1.4.1.20301.2.7.16.3.4.1.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpOperVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vrrpOperVirtRtrTable'
An entry in the table of virtual routers.
vrrpOperVirtRtrEntry row .1.3.6.1.4.1.20301.2.7.16.3.4.1.1.1
A row in the vrrpOperVirtRtrTable
Column Syntax OID
vrrpOperVirtRtrIndexThe index for the VRRP virtual router.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.3.4.1.1.1.1
vrrpOperVirtRtrBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object is read.
Enumerationr/w
Enumerated Values:
1ok
2backup
.1.3.6.1.4.1.20301.2.7.16.3.4.1.1.1.2
.1.3.6.1.4.1.20301.2.7.16.8.1.1.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgPortPriorityTable'
The table of QOS Port Priority configuration.
qosCurCfgPortPriorityEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.1.1
Information about a particular QOS Port Priority configuration.
Column Syntax OID
qosCurCfgPortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.1.1.1.1
qosCurCfgPortPrioritySwitch Port Priority Should be between 0 and 7Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.1.1.2
qosCurCfgPortAliasSwitch Port AliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.1.1.1.3
.1.3.6.1.4.1.20301.2.7.16.8.1.1.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgPortPriorityTable'
The table of QOS Port Priority configuration.
qosNewCfgPortPriorityEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.2.1
Information about a particular QOS Port Priority configuration.
Column Syntax OID
qosNewCfgPortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.1.2.1.1
qosNewCfgPortPrioritySwitch Port Priority Should be between 0 and 7Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.2.1.2
qosNewCfgPortAliasSwitch Port AliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.1.2.1.3
.1.3.6.1.4.1.20301.2.7.16.8.1.1.3 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgPriorityCoSTable'
The table of Frame Priority and COSq configuration.
qosCurCfgPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.3.1
Information about a particular Frame Priority and COSq configuration.
Column Syntax OID
qosCurCfgPriorityIndexFrame priority NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.3.1.1
qosCurCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.3.1.2
.1.3.6.1.4.1.20301.2.7.16.8.1.1.4 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgPriorityCoSTable'
The table of Frame Priority and COSq configuration.
qosNewCfgPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.4.1
Information about a particular Frame Priority and COSq configuration.
Column Syntax OID
qosNewCfgPriorityIndexFrame priority NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.4.1.1
qosNewCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.4.1.2
.1.3.6.1.4.1.20301.2.7.16.8.1.1.5 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgCosWeightTable'
The table of CoSq and Weight configuration.
qosCurCfgCosWeightEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.5.1
Information about a particular CoSq and Weight configuration.
Column Syntax OID
qosCurCfgCosIndexCoSq NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.5.1.1
qosCurCfgCosWeightWeight of CoSqInteger32
Constraints:
range: 0-15
.1.3.6.1.4.1.20301.2.7.16.8.1.1.5.1.2
.1.3.6.1.4.1.20301.2.7.16.8.1.1.6 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgCosWeightTable'
The table of CoSq and Weight configuration.
qosNewCfgCosWeightEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.1.6.1
Information about a particular CoSq and Weight configuration.
Column Syntax OID
qosNewCfgCosIndexCoSq NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.1.6.1.1
qosNewCfgCosWeightWeight of CoSqInteger32r/w
Constraints:
range: 0-15
.1.3.6.1.4.1.20301.2.7.16.8.1.1.6.1.2
.1.3.6.1.4.1.20301.2.7.16.8.1.2.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgDscpTable'
The table of Dscp to New Dscp/802.1p priority configuration.
qosCurCfgDscpEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.2.1.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Column Syntax OID
qosCurCfgDscpIndexDscp valueInteger32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.8.1.2.1.1.1
qosCurCfgMapDscpMap Dscp ValueInteger32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.8.1.2.1.1.2
qosCurCfgMap8021pMap 802.1p valueInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.2.1.1.3
.1.3.6.1.4.1.20301.2.7.16.8.1.2.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgDscpTable'
The table of Dscp to New Dscp/802.1p priority configuration.
qosNewCfgDscpEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.2.2.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Column Syntax OID
qosNewCfgDscpIndexDscp valueInteger32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.8.1.2.2.1.1
qosNewCfgMapDscpMap Dscp ValueInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.8.1.2.2.1.2
qosNewCfgMap8021pMap 802.1p valueInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.2.2.1.3
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgPortProfileTable'
The table of QOS port WRED ECN profile configuration.
qoSCurCfgPortProfileEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1
Information about a particular Transmit queue of a port WRED ECN profile configuration.
Column Syntax OID
qosCurCfgProfilePortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.1
qosCurCfgTrqIndexTransmit Queue NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.2
qosCurCfgTrqNonTcpMinPort Transmit queue WRED ECN nontcp profile MinThreshold value.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.3
qosCurCfgTrqNonTcpMaxPort Transmit queue WRED ECN nontcp profile MaxThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.4
qosCurCfgTrqNonTcpRatePort Transmit queue WRED ECN nontcp profile DropRate value.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.5
qosCurCfgTrqTcpMinPort Transmit queue WRED ECN tcp profile MinThreshold value.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.6
qosCurCfgTrqTcpMaxPort Transmit queue WRED ECN tcp profile MaxThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.7
qosCurCfgTrqTcpRatePort Transmit queue WRED ECN tcp profile DropRate value.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.8
qosCurCfgPortTrqWredStateThis is for turning on/off WRED per transmit queue per port.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.9
qosCurCfgProfilePortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.3.1.1.10
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgPortProfileTable'
The table of QOS Port WRED ECN configuration.
qoSNewCfgPortProfileEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1
Information about a particular Transmit queue of a port WRED ECN configuration.
Column Syntax OID
qosNewCfgProfilePortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.1
qosNewCfgTrqIndexTransmit Queue NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.2
qosNewCfgTrqNonTcpMinPort Transmit queue WRED ECN nontcp profile MinThreshold value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.3
qosNewCfgTrqNonTcpMaxPort Transmit queue WRED ECN nontcp profile MaxThreshold value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.4
qosNewCfgTrqNonTcpRatePort Transmit queue WRED ECN nontcp profile DropRate value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.5
qosNewCfgTrqTcpMinPort Transmit queue WRED ECN tcp profile MinThreshold value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.6
qosNewCfgTrqTcpMaxPort Transmit queue WRED ECN tcp profile MaxThreshold value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.7
qosNewCfgTrqTcpRatePort Transmit queue WRED ECN tcp profile DropRate value.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.8
qosNewCfgPortTrqWredStateThis is for turning on/off WRED per transmit queue per port.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.9
qosNewCfgProfilePortAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.3.2.1.10
.1.3.6.1.4.1.20301.2.7.16.8.1.3.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgPortStateTable'
The table of QOS port WRED ECN state configuration.
qoSCurCfgPortStateEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.3.1
Information about a particular port WRED ECN state configuration.
Column Syntax OID
qosCurCfgStatePortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.3.3.1.1
qosCurCfgPortWredStateThis is for turning on/off WRED per port.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.3.1.2
qosCurCfgPortEcnStateThis is for turning on/off ECN per port.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.3.1.3
qosCurCfgStatePortAliasSwitch Port AliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.3.3.1.4
.1.3.6.1.4.1.20301.2.7.16.8.1.3.4 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgPortStateTable'
The table of QOS port WRED ECN state configuration.
qoSNewCfgPortStateEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.4.1
Information about a particular port WRED ECN state configuration.
Column Syntax OID
qosNewCfgStatePortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.20301.2.7.16.8.1.3.4.1.1
qosNewCfgPortWredStateThis is for turning on/off WRED per portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.4.1.2
qosNewCfgPortEcnStateThis is for turning on/off ECN per port.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.4.1.3
qosNewCfgStatePortAliasSwitch Port AliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.8.1.3.4.1.4
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgGlobalProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosCurCfgGlobalProfileTable'
The table of QOS global WRED ECN profile configuration.
qoSCurCfgGlobalProfileEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1
Information about a particular Transmit queue of global WRED ECN profile configuration.
Column Syntax OID
qosCurCfgGlobalTrqIndexGlobal Transmit Queue NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.1
qosCurCfgGlobalTrqNonTcpMinGlobal transmit queue WRED ECN nontcp profile MinThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.2
qosCurCfgGlobalTrqNonTcpMaxGlobal transmit queue WRED ECN nontcp profile MaxThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.3
qosCurCfgGlobalTrqNonTcpRateGlobal transmit queue WRED ECN nontcp profile DropRate valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.4
qosCurCfgGlobalTrqTcpMinGlobal transmit queue WRED ECN tcp profile MinThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.5
qosCurCfgGlobalTrqTcpMaxGlobal transmit queue WRED ECN tcp profile MaxThreshold valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.6
qosCurCfgGlobalTrqTcpRateGlobal transmit queue WRED ECN tcp profile DropRate valueInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.7
qosCurCfgGlobalTrqWredStateThis is for turning on/off WRED per global transmit queueEnumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.5.1.8
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgGlobalProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::qosNewCfgGlobalProfileTable'
The table of QOS global WRED ECN profile configuration.
qoSNewCfgGlobalProfileEntry row .1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1
Information about a particular Transmit queue of global WRED ECN profile configuration.
Column Syntax OID
qosNewCfgGlobalTrqIndexGlobal Transmit Queue NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.1
qosNewCfgGlobalTrqNonTcpMinGlobal transmit queue WRED ECN nontcp profile MinThreshold valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.2
qosNewCfgGlobalTrqNonTcpMaxGlobal transmit queue WRED ECN nontcp profile MaxThreshold valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.3
qosNewCfgGlobalTrqNonTcpRateGlobal transmit queue WRED ECN nontcp profile DropRate valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.4
qosNewCfgGlobalTrqTcpMinGlobal transmit queue WRED ECN tcp profile MinThreshold valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.5
qosNewCfgGlobalTrqTcpMaxGlobal transmit queue WRED ECN tcp profile MaxThreshold valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.6
qosNewCfgGlobalTrqTcpRateGlobal transmit queue WRED ECN tcp profile DropRate valueInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.7
qosNewCfgGlobalTrqWredStateThis is for turning on/off WRED per global transmit queueEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.20301.2.7.16.8.1.3.6.1.8
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1 · 1 row entry · 48 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclCurCfgTable'
The table of current ACL configuration.
aclCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1
Current information about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclCurCfgIndexThe index associated with this ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.1
aclCurCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.3
aclCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
4redirect
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.4
aclCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this ACL entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.5
aclCurCfgEthFmtThe packet ethernet format to be filtered.Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.6
aclCurCfgTagFmtThe packet tag format to be filtered.Enumeration
Enumerated Values:
1disabled
2any
3untagged
4tagged
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.7
aclCurCfgIPFmtThe packet IP format to be filtered.Enumeration
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.8
aclCurCfgSrcMACAddressThe source MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.9
aclCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.10
aclCurCfgDstMACAddressThe destination MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.11
aclCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.12
aclCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.13
aclCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Constraints:
range: 1536-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.14
aclCurCfgVLanIdThe virtual LAN identifier to be filtered.Integer32
Constraints:
range: 0-4095
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.15
aclCurCfgVLanMaskThe mask applied to aclCurCfgVLanId for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.16
aclCurCfg8021pPriorityThe 802.1p priority to be filtered.Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.17
aclCurCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.18
aclCurCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.19
aclCurCfgSrcIPAddressThe source IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.20
aclCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.21
aclCurCfgDstIPAddressThe destination IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.22
aclCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.23
aclCurCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.24
aclCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.25
aclCurCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.26
aclCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.27
aclCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.28
aclCurCfgEgressPortIndexesThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.29
aclCurCfgStatisticsWhether statistics collection for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.30
aclCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.39
aclCurCfgMeterActionMeter Action for this ACL.Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.41
aclCurCfgMeterEnableMeter state for this ACL.Enumeration
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.42
aclCurCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32
Constraints:
range: 64-40000000
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.43
aclCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.44
aclCurCfgUserSet user defined priority for this ACL.Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.45
aclCurCfgInprofDscpSet in profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.46
aclCurCfgTosTo enable/disable setting pkts based on TOS bits.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.47
aclCurCfgOutprofDscpSet out profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.48
aclCurCfgUserEnableSet update method for this ACL.Enumeration
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.49
aclCurCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.50
aclCurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.51
aclCurCfgMirrorPortIndexSet port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.74
aclCurCfgLogWhether log for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.81
aclCurCfgMirrorPortAliasThe mirror port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.91
aclCurCfgEgressPortAliasesThe egress port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.92
aclCurCfgVnidNSX Gateway VNID.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.95
aclCurCfgActionRedirectTrunkCurrent egress trunk id for ACL traffic redirection.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.96
aclCurCfgActionRedirectPortCurrent egress port for ACL traffic redirection.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.1.1.97
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2 · 1 row entry · 63 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclNewCfgTable'
The table of new ACL configuration.
aclNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1
New information about a particular ACL configuration.
Indexes
Column Syntax OID
aclNewCfgIndexThe index associated with this ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.1
aclNewCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.3
aclNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
4redirect
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.4
aclNewCfgFilterActionSetPrioThe COS queue to be used when the action for this ACL entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.5
aclNewCfgEthFmtThe packet ethernet format to be filtered.Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.6
aclNewCfgTagFmtThe packet tagging format to be filtered.Enumerationr/w
Enumerated Values:
1disabled
2any
3none
4tagged
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.7
aclNewCfgIPFmtThe packet IP format to be filtered.Enumerationr/w
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.8
aclNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.9
aclNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.10
aclNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.11
aclNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.12
aclNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.13
aclNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.14
aclNewCfgVLanIdThe virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan …
Integer32r/w
Constraints:
range: 0-4095
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.15
aclNewCfgVLanMaskThe mask to be applied to aclNewCfgVLanId for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.16
aclNewCfg8021pPriorityThe 802.1p priority to be filtered.Enumerationr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.17
aclNewCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.18
aclNewCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.19
aclNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.20
aclNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.21
aclNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.22
aclNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.23
aclNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.24
aclNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.25
aclNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.26
aclNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.27
aclNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.28
aclNewCfgEgressPortIndexesThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.29
aclNewCfgStatisticsWhether statistics collection for this ACL is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.30
aclNewCfgAddEgressPortIndexThe port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.31
aclNewCfgRemoveEgressPortIndexThe port to be removed from the specified ACL. A value of zero
is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.32
aclNewCfgDeleteThis is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.33
aclNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.39
aclNewCfgMeterActionMeter Action for this ACL.Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.41
aclNewCfgMeterEnableMeter state for this ACL.Enumerationr/w
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.42
aclNewCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32r/w
Constraints:
range: 64-40000000
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.43
aclNewCfgKbitsBurstThe maximum burst size of the meter associated with this ACL entry.Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.44
aclNewCfgUserSet user defined priority for this ACL.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.45
aclNewCfgInprofDscpSet in profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.46
aclNewCfgTosTo enable/disable setting pkts based on TOS bits.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.47
aclNewCfgOutprofDscpSet out profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.48
aclNewCfgUserEnableSet update method for this ACL.Enumerationr/w
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.49
aclNewCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting …
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.50
aclNewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.51
aclNewCfgResetThis is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.52
aclNewCfgEthernetResetThis is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.53
aclNewCfgIpv4ResetThis is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.54
aclNewCfgTcpudpResetThis is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.55
aclNewCfgMeterResetThis is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.56
aclNewCfgRemarkResetThis is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.57
aclNewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.58
aclNewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.59
aclNewCfgPktfmtResetThis is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.60
aclNewCfgMirrorPortIndexSet port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.74
aclNewCfgLogWhether log for this ACL is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.81
aclNewCfgMirrorPortAliasThe mirror port alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.91
aclNewCfgEgressPortAliasesThe egress port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.92
aclNewCfgAddEgressPortAliasThe port to be added using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.93
aclNewCfgRemoveEgressPortAliasThe port to be removed using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.94
aclNewCfgVnidNSX Gateway new VNID.SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.95
aclNewCfgActionRedirectTrunkNew egress trunk id for ACL traffic redirection.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.96
aclNewCfgActionRedirectPortNew egress port for ACL traffic redirection.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.97
aclNewCfgVnidResetThis is an action object to reset an ACL VNID. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.1.2.1.98
.1.3.6.1.4.1.20301.2.7.16.9.1.3.1 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclGroupCurCfgTable'
The table of current ACL Group configuration.
aclGroupCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.3.1.1
Information about a particular ACL configuration.
Column Syntax OID
aclGroupCurCfgIndexThe index associated with this ACL Group entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.1.1.1
aclGroupCurCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.3.1.1.2
aclGroupCurCfgMemberAcl6sThe ACL6 members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.3.1.1.9
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclGroupNewCfgTable'
The table of new ACL Group configuration.
aclGroupNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1
New information about a particular ACL configuration.
Column Syntax OID
aclGroupNewCfgIndexThe index associated with this ACL Group entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.1
aclGroupNewCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.2
aclGroupNewCfgAddAclThe index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is alway…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.4
aclGroupNewCfgRemoveAclThe index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.5
aclGroupNewCfgDeleteThis is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.8
aclGroupNewCfgMemberAcl6sThe ACL6 members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . .…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.9
aclGroupNewCfgAddAcl6The index of the ACL6 entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s
bitmap. A value of zero is al…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.10
aclGroupNewCfgRemoveAcl6The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.3.2.1.11
.1.3.6.1.4.1.20301.2.7.16.9.1.4.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclCurCfgPortTable'
The table of port acl groups configuration.
aclCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1
Information about a particular port acl configuration.
Column Syntax OID
aclCurCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber.1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1.1
aclCurCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1.2
aclCurCfgPortAclGrpBmapThe acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1.4
aclCurCfgPortAcl6BmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1.13
aclCurCfgPortAliasThe alias of a particular port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.4.1.1.14
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2 · 1 row entry · 11 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::aclNewCfgPortTable'
The table of port acl configuration.
aclNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1
Information about a particular port acl groups configuration.
Column Syntax OID
aclNewCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.1
aclNewCfgPortAddAclThe acl to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.2
aclNewCfgPortAddAclGrpThe acl group to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.4
aclNewCfgPortRemoveAclThe acl to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.5
aclNewCfgPortRemoveAclGrpThe acl group to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.7
aclNewCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.8
aclNewCfgPortAclGrpBmapThe acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....
xxx…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.10
aclNewCfgPortAddAcl6The acl6 to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.11
aclNewCfgPortRemoveAcl6The acl6 to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.12
aclNewCfgPortAcl6BmapThe acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || …
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.13
aclNewCfgPortAliasThe alias of a particular port.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.4.2.1.14
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1 · 1 row entry · 32 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6CurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::acl6CurCfgTable'
The table of current ACL6 configuration.
acl6CurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1
Current information about a particular ACL6 configuration entry.
Indexes
Column Syntax OID
acl6CurCfgIndexThe index associated with this ACL6 entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.1
acl6CurCfgGroupThe index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.2
acl6CurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.3
acl6CurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this ACL6 entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.4
acl6CurCfgSrcIPv6AddressThe source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxx…
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.5
acl6CurCfgSrcIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.6
acl6CurCfgDstIPv6AddressThe destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.7
acl6CurCfgDstIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.8
acl6CurCfgIPv6FlowLabelThe IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.9
acl6CurCfgIPv6TrafficClassThe IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.10
acl6CurCfgIPv6NextHeaderThe IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.11
acl6CurCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.12
acl6CurCfgSrcPortMaskThe mask applied to acl6CurCfgSrcPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.13
acl6CurCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.14
acl6CurCfgDstPortMaskThe mask applied to acl6CurCfgDstPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.15
acl6CurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.16
acl6CurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.17
acl6CurCfgEgressPortIndexesThe port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.18
acl6CurCfgStatisticsWhether statistics collection for this ACL6 is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.19
acl6CurCfgUserSet user defined priority for this ACL6.Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.20
acl6CurCfgInprofDscpSet in profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.21
acl6CurCfgTosTo enable/disable setting pkts based on TOS bits.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.22
acl6CurCfgUserEnableSet update method for this ACL6.Enumeration
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.24
acl6CurCfgInprofDscpEnableWhether in profile update DSCP for this ACL6 is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.25
acl6CurCfgLogWhether log for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.26
acl6CurCfgMeterActionMeter Action for this ACL.Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.28
acl6CurCfgMeterEnableMeter state for this ACL.Enumeration
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.29
acl6CurCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32
Constraints:
range: 64-40000000
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.30
acl6CurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.31
acl6CurCfgOutprofDscpSet out profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.32
acl6CurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.33
acl6CurCfgEgressPortAliasesThe port alias in the ACL6 configured for egress filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.1.1.34
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2 · 1 row entry · 42 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6NewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::acl6NewCfgTable'
The table of new ACL6 configuration.
acl6NewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1
New information about a particular ACL6 configuration.
Indexes
Column Syntax OID
acl6NewCfgIndexThe index associated with this ACL6 entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.1
acl6NewCfgGroupThe index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.2
acl6NewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.3
acl6NewCfgFilterActionSetPrioThe COS queue to be used when the action for this ACL6 entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.4
acl6NewCfgSrcIPv6AddressThe source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::x…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.5
acl6NewCfgSrcIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.6
acl6NewCfgDstIPv6AddressThe destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.7
acl6NewCfgDstIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.8
acl6NewCfgIPv6FlowLabelThe IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.9
acl6NewCfgIPv6TrafficClassThe IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.10
acl6NewCfgIPv6NextHeaderThe IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.11
acl6NewCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.12
acl6NewCfgSrcPortMaskThe mask applied to acl6CurCfgSrcPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.13
acl6NewCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.14
acl6NewCfgDstPortMaskThe mask applied to acl6CurCfgDstPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.15
acl6NewCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.16
acl6NewCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.17
acl6NewCfgEgressPortIndexesThe port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.18
acl6NewCfgStatisticsWhether statistics collection for this ACL6 is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.19
acl6NewCfgAddEgressPortIndexThe port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.20
acl6NewCfgRemoveEgressPortIndexThe port to be removed from the specified ACL6. A value of zero
is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.21
acl6NewCfgDeleteThis is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.22
acl6NewCfgUserSet user defined priority for this ACL6.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.23
acl6NewCfgInprofDscpSet in profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.24
acl6NewCfgTosTo enable/disable setting pkts based on TOS bits.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.25
acl6NewCfgUserEnableSet update method for this ACL6.Enumerationr/w
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.27
acl6NewCfgInprofDscpEnableWhether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.28
acl6NewCfgIPv6ResetThis is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.30
acl6NewCfgTcpudpResetThis is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.31
acl6NewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.32
acl6NewCfgLogWhether log for this ACL is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.33
acl6NewCfgMeterActionMeter Action for this ACL.Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.35
acl6NewCfgMeterEnableMeter state for this ACL.Enumerationr/w
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.36
acl6NewCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32r/w
Constraints:
range: 64-40000000
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.37
acl6NewCfgKbitsBurstThe maximum burst size of the meter associated with this ACL entry.Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.38
acl6NewCfgMeterResetThis is an action object to reset an ACL6 Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.39
acl6NewCfgOutprofDscpSet out profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.40
acl6NewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.41
acl6NewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.42
acl6NewCfgAddEgressPortAliasThe port alias to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.43
acl6NewCfgRemoveEgressPortAliasThe port alias to be removed from the specified ACL6. A value of zero
is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.44
acl6NewCfgEgressPortAliasesThe port alias in the ACL6 configured for egress filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.5.2.1.45
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mAclCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mAclCurCfgTable'
The table of current Management ACL configuration.
mAclCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1
Current information about a particular Management ACL configuration entry.
Indexes
Column Syntax OID
mAclCurCfgIndexThe index associated with this Management ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.1
mAclCurCfgUserEnableSet update method for this mACL.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.2
mAclCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this mACL entry.
Enumeration
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.3
mAclCurCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.4
mAclCurCfgSrcIPAddressThe source IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.5
mAclCurCfgSrcIPMaskThe address mask applied to mAclCurCfgSrcIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.6
mAclCurCfgDstIPAddressThe destination IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.7
mAclCurCfgDstIPMaskThe address mask applied to mAclCurCfgDstIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.8
mAclCurCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.9
mAclCurCfgSrcPortMaskThe mask applied to mAclCurCfgSrcPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.10
mAclCurCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.11
mAclCurCfgDstPortMaskThe mask applied to mAclCurCfgDstPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.12
mAclCurCfgStatisticsWhether statistics collection for this mACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.7.1.1.13
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2 · 1 row entry · 17 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mAclNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::mAclNewCfgTable'
The table of new Management ACL configuration.
mAclNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1
New information about a particular Management ACL configuration entry.
Indexes
Column Syntax OID
mAclNewCfgIndexThe index associated with this Management ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.1
mAclNewCfgUserEnableSet update method for this mACL.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.2
mAclNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this mACL entry.
Enumerationr/w
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.3
mAclNewCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.4
mAclNewCfgSrcIPAddressThe source IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.5
mAclNewCfgSrcIPMaskThe address mask applied to mAclNewCfgSrcIPAddress for filtering.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.6
mAclNewCfgDstIPAddressThe destination IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.7
mAclNewCfgDstIPMaskThe address mask applied to mAclNewCfgDstIPAddress for filtering.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.8
mAclNewCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.9
mAclNewCfgSrcPortMaskThe mask applied to mAclNewCfgSrcPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.10
mAclNewCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.11
mAclNewCfgDstPortMaskThe mask applied to mAclNewCfgDstPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.12
mAclNewCfgStatisticsWhether statistics collection for this mACL is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.13
mAclNewCfgDeleteThis is an action object to delete an MACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.14
mAclNewCfgResetThis is an action object to reset an MACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.15
mAclNewCfgIpv4ResetThis is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.16
mAclNewCfgTcpudpResetThis is an action object to reset an MACL Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.1.7.2.1.17
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1 · 1 row entry · 41 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapCurCfgTable'
The table of current VMAP configuration.
vmapCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1
Current information about a particular VMAP configuration entry.
Indexes
Column Syntax OID
vmapCurCfgIndexThe index associated with this VMAP entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.1
vmapCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.2
vmapCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this VMAP entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.3
vmapCurCfgEthFmtThe packet ethernet format to be filtered.Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.4
vmapCurCfgTagFmtThe packet tag format to be filtered.Enumeration
Enumerated Values:
1disabled
2any
3untagged
4tagged
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.5
vmapCurCfgIPFmtThe packet IP format to be filtered.Enumeration
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.6
vmapCurCfgSrcMACAddressThe source MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.7
vmapCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.8
vmapCurCfgDstMACAddressThe destination MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.9
vmapCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.10
vmapCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.11
vmapCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Constraints:
range: 1536-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.12
vmapCurCfg8021pPriorityThe 802.1p priority to be filtered.Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.13
vmapCurCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.14
vmapCurCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.15
vmapCurCfgSrcIPAddressThe source IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.16
vmapCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.17
vmapCurCfgDstIPAddressThe destination IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.18
vmapCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.19
vmapCurCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.20
vmapCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.21
vmapCurCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.22
vmapCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.23
vmapCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.24
vmapCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.25
vmapCurCfgEgressPortsThe port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.26
vmapCurCfgStatisticsWhether statistics collection for this VMAP is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.27
vmapCurCfgMeterActionMeter Action for this VMAP.Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.31
vmapCurCfgMeterEnableMeter state for this VMAP.Enumeration
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.32
vmapCurCfgKbitsSecThe commited rate of meter associated with this VMAP entry.Unsigned32
Constraints:
range: 64-10000000
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.33
vmapCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this VMAP entry.Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.34
vmapCurCfgUserSet user defined priority for this VMAP.Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.35
vmapCurCfgInprofDscpSet in profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.36
vmapCurCfgTosTo enable/disable setting pkts based on TOS bits.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.37
vmapCurCfgOutprofDscpSet out profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.38
vmapCurCfgUserEnableSet update method for this VMAP.Enumeration
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.39
vmapCurCfgInprofDscpEnableWhether in profile update DSCP for this VMAP is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.40
vmapCurCfgOutprofDscpEnableWhether out profile update DSCP for this VMAP is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.41
vmapCurCfgMirrorPortSet port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.51
vmapCurCfgEgressPortAliasThe port alias in the VMAP configured for egress filteringSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.53
vmapCurCfgMirrorPortAliasSet port in the VMAP for mirroring using it's alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.1.1.54
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2 · 1 row entry · 55 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapNewCfgTable'
The table of new VMAP configuration.
vmapNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1
New information about a particular VMAP configuration.
Indexes
Column Syntax OID
vmapNewCfgIndexThe index associated with this VMAP entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.1
vmapNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.2
vmapNewCfgFilterActionSetPrioThe COS queue to be used when the action for this VMAP entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.3
vmapNewCfgEthFmtThe packet ethernet format to be filtered.Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.4
vmapNewCfgTagFmtThe packet tagging format to be filtered.Enumerationr/w
Enumerated Values:
1disabled
2any
3none
4tagged
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.5
vmapNewCfgIPFmtThe packet IP format to be filtered.Enumerationr/w
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.6
vmapNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.7
vmapNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.8
vmapNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.9
vmapNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.10
vmapNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.11
vmapNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.12
vmapNewCfg8021pPriorityThe 802.1p priority to be filtered.Enumerationr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.13
vmapNewCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.14
vmapNewCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.15
vmapNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.16
vmapNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.17
vmapNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.18
vmapNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.19
vmapNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.20
vmapNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.21
vmapNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.22
vmapNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.23
vmapNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.24
vmapNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.25
vmapNewCfgEgressPortsThe port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.26
vmapNewCfgStatisticsWhether statistics collection for this VMAP is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.27
vmapNewCfgAddEgressPortThe port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.28
vmapNewCfgRemoveEgressPortThe port to be removed from the specified VMAP. A value of zero
is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.29
vmapNewCfgDeleteThis is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.30
vmapNewCfgMeterActionMeter Action for this VMAP.Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.31
vmapNewCfgMeterEnableMeter state for this VMAP.Enumerationr/w
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.32
vmapNewCfgKbitsSecThe commited rate of meter associated with this VMAP entry.Unsigned32r/w
Constraints:
range: 64-10000000
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.33
vmapNewCfgKbitsBurstThe maximum burst size of the meter associated with this VMAP entry.Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.34
vmapNewCfgUserSet user defined priority for this VMAP.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.35
vmapNewCfgInprofDscpSet in profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.36
vmapNewCfgTosTo enable/disable setting pkts based on TOS bits.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.37
vmapNewCfgOutprofDscpSet out profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.38
vmapNewCfgUserEnableSet update method for this VMAP.Enumerationr/w
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.39
vmapNewCfgInprofDscpEnableWhether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.40
vmapNewCfgOutprofDscpEnableWhether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when sett…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.41
vmapNewCfgResetThis is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.42
vmapNewCfgEthernetResetThis is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.43
vmapNewCfgIpv4ResetThis is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.44
vmapNewCfgTcpudpResetThis is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.45
vmapNewCfgMeterResetThis is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.46
vmapNewCfgRemarkResetThis is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.47
vmapNewCfgRemarkInprofResetThis is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.48
vmapNewCfgRemarkOutprofResetThis is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.49
vmapNewCfgPktfmtResetThis is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.50
vmapNewCfgMirrorPortSet port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.51
vmapNewCfgEgressPortAliasesThe port alias in the VMAP configured for egress filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.53
vmapNewCfgMirrorPortAliasSet port in the VMAP for mirroring using it's alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.54
vmapNewCfgAddEgressPortAliasThe port to be added using it's alias to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.55
vmapNewCfgRemoveEgressPortAliasThe port to be removed using it's alias from the specified VMAP. A value of zero
is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.9.3.1.2.1.56
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanCurCfgNonServerPortsTable'
The table of the current configuration
of vmaps for the non-server ports of vlans.
vmapVlanCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vlans.
Column Syntax OID
vmapVlanCurCfgNonServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.1.1.1
vmapVlanCurCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanNewCfgNonServerPortsTable'
The table of the new configuration
of vmaps for non-server ports of vlans.
vmapVlanNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vlans.
Column Syntax OID
vmapVlanNewCfgNonServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2.1.1
vmapVlanNewCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2.1.2
vmapVlanNewCfgNonServerPortsAddVmapAdd a new vmap to the non-server ports of the vlanSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2.1.3
vmapVlanNewCfgNonServerPortsRemVmapRemove a vmap from the non-server ports of the vlanSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.1.2.1.4
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanCurCfgServerPortsTable'
The table of the current configuration
of vmaps for server ports of vlans.
vmapVlanCurCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vlans.
Column Syntax OID
vmapVlanCurCfgServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.1.1.1
vmapVlanCurCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanNewCfgServerPortsTable'
The table of the new configuration
of vmaps for server ports of vlans.
vmapVlanNewCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vlans.
Column Syntax OID
vmapVlanNewCfgServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2.1.1
vmapVlanNewCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2.1.2
vmapVlanNewCfgServerPortsAddVmapAdd a new vmap to the server ports of the vlanSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2.1.3
vmapVlanNewCfgServerPortsRemVmapRemove a vmap from the server ports of the vlanSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.2.2.1.4
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanCurCfgAllPortsTable'
The table of the current configuration
of vmaps for all ports of vlans.
vmapVlanCurCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.1.1
A row in the table of current configuration
of vmaps for all ports of vlans.
Column Syntax OID
vmapVlanCurCfgAllPortsVlanIdxThe vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.1.1.1
vmapVlanCurCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapVlanNewCfgAllPortsTable'
The table of the new configuration
of vmaps for all ports of vlans.
vmapVlanNewCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2.1
A row in the table of new configuration
of vmaps for all ports of vlans.
Column Syntax OID
vmapVlanNewCfgAllPortsVlanIdxThe vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2.1.1
vmapVlanNewCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2.1.2
vmapVlanNewCfgAllPortsAddVmapAdd a new vmap to all ports of the vlanSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2.1.3
vmapVlanNewCfgAllPortsRemVmapRemove a vmap from all vlan portsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.1.3.2.1.4
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupCurCfgNonServerPortsTable'
The table of the current configuration
of vmaps for non-server ports of vm groups.
vmapGroupCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vm groups.
Column Syntax OID
vmapGroupCurCfgNonServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.1.1.1
vmapGroupCurCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupNewCfgNonServerPortsTable'
The table of the new configuration
of vmaps for non-server ports of vm groups.
vmapGroupNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vm groups.
Column Syntax OID
vmapGroupNewCfgNonServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2.1.1
vmapGroupNewCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2.1.2
vmapGroupNewCfgNonServerPortsAddVmapAdd a new vmap to the non-server ports of the vm groupSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2.1.3
vmapGroupNewCfgNonServerPortsRemVmapRemove a vmap from the non-server ports of the vm groupSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.1.2.1.4
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupCurCfgServerPortsTable'
The table of the current configuration
of vmaps for server ports of vm groups.
vmapGroupCurCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vm groups.
Column Syntax OID
vmapGroupCurCfgServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.1.1.1
vmapGroupCurCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupNewCfgServerPortsTable'
The table of the new configuration
of vmaps for server ports of vm groups.
vmapGroupNewCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vm groups.
Column Syntax OID
vmapGroupNewCfgServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2.1.1
vmapGroupNewCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2.1.2
vmapGroupNewCfgServerPortsAddVmapAdd a new vmap to the server ports of the vm groupSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2.1.3
vmapGroupNewCfgServerPortsRemVmapRemove a vmap from the server ports of the vm groupSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.2.2.1.4
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupCurCfgAllPortsTable'
The table of the current configuration
of vmaps for all ports of vm groups.
vmapGroupCurCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.1.1
A row in the table of current configuration
of vmaps for all ports of vm groups.
Column Syntax OID
vmapGroupCurCfgAllPortsGroupIdxThe vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.1.1.1
vmapGroupCurCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.1.1.2
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmapGroupNewCfgAllPortsTable'
The table of the new configuration
of vmaps for all ports of vm groups.
vmapGroupNewCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2.1
A row in the table of new configuration
of vmaps for all ports of vm groups.
Column Syntax OID
vmapGroupNewCfgAllPortsGroupIdxThe vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2.1.1
vmapGroupNewCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2.1.2
vmapGroupNewCfgAllPortsAddVmapAdd a new vmap to all ports of the vm groupSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2.1.3
vmapGroupNewCfgAllPortsRemVmapRemove a vmap from all vm group portsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.9.3.2.2.3.2.1.4
.1.3.6.1.4.1.20301.2.7.16.14.1.3.7 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsPortCurCfgTable'
The table of FIP Snooping port current config.
fipsPortCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.14.1.3.7.1
FIP Config for a particular port.
Column Syntax OID
fipsPortCurCfgIndexThe port numberPortNumber.1.3.6.1.4.1.20301.2.7.16.14.1.3.7.1.1
fipsPortCurCfgFcfModeWeither the port is set to have FCF auto detection, on, or off.Enumeration
Enumerated Values:
0auto
1on
2off
.1.3.6.1.4.1.20301.2.7.16.14.1.3.7.1.2
fipsPortCurCfgFipsEnaFIP snooping enabled or disabled on this port.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.14.1.3.7.1.3
.1.3.6.1.4.1.20301.2.7.16.14.1.3.8 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsPortNewCfgTable'
The table of FIP Snooping port new config.
fipsPortNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.14.1.3.8.1
FIP Config for a particular port.
Column Syntax OID
fipsPortNewCfgIndexThe port numberPortNumber.1.3.6.1.4.1.20301.2.7.16.14.1.3.8.1.1
fipsPortNewCfgFcfModeSet this port to have FCF on, off, or auto detection.Enumerationr/w
Enumerated Values:
0auto
1on
2off
.1.3.6.1.4.1.20301.2.7.16.14.1.3.8.1.2
fipsPortNewCfgFipsEnaEnable or disable FIP snooping on this port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.14.1.3.8.1.3
.1.3.6.1.4.1.20301.2.7.16.14.2.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fcoeStatsTable'
The table of fcoe statistics per switch unit.
fcoeStatsEntry row .1.3.6.1.4.1.20301.2.7.16.14.2.1.1
A switch unit.
Indexes
Column Syntax OID
fcoeStatsIndexThe switch index for fips statisticsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.1.1.1
fcoeStatsFcfAddedThe number of FCF added to the FCOE database.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.1.1.2
fcoeStatsFcfRemovedThe number of FCF removed to the FCOE database.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.1.1.3
fcoeStatsFcoeAddedThe number of FCOE connection added to the FCOE database.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.1.1.4
fcoeStatsFcoeRemovedThe number of FCOE connection removed to the FCOE database.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.1.1.5
.1.3.6.1.4.1.20301.2.7.16.14.2.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsKeepAliveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fcoeStatsKeepAliveTable'
The table of fcoe Keep-Alive statistics.
fcoeStatsKeepAliveEntry row .1.3.6.1.4.1.20301.2.7.16.14.2.2.1
A FCF Keep Alive entry.
Column Syntax OID
fcoeStatsKeepAliveIndexThe FCF indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.2.1.1
fcoeStatsKeepAliveFcfMacDetected FCF MAC address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.2.2.1.2
fcoeStatsKeepAliveCountFCF MAC Keep Alive count.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.2.2.1.3
.1.3.6.1.4.1.20301.2.7.16.14.3.1.1 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsInfoPortTable'
The table of fips port run-time information.
fipsInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.14.3.1.1.1
A port in the fips information table.
Column Syntax OID
fipsInfoPortIndexThe port index for fipsPortNumber.1.3.6.1.4.1.20301.2.7.16.14.3.1.1.1.1
fipsInfoAclSequencerThe fip sequence number for an acl in this portSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.3.1.1.1.2
fipsInfoAclAn FIPS ACL entryOctetString
Constraints:
range: 0-31
.1.3.6.1.4.1.20301.2.7.16.14.3.1.1.1.3
fipsInfoPortAliasThe port alias for fipsSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.1.1.4
.1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsInfoFcfTable'
The table of fips FCF detected.
fipsInfoFcfEntry row .1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2.1
A FCF in the fips information table.
Column Syntax OID
fipsInfoFcfIndexFCF indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2.1.1
fipsInfoFcfMacFCF MACSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2.1.2
fipsInfoFcfPortFCF Port/Trunk aliasSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2.1.3
fipsInfoFcfVlanFCF VlanSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.3.1.2.2.1.4
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcoeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsInfoFcoeTable'
The table of fips FCOE connections.
fipsInfoFcoeEntry row .1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1
A FCOE connection in the fips information table.
Column Syntax OID
fipsInfoFcoeIndexFCOE connection indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1.1
fipsInfoFcoeVNPortMacFCOE connection VNPort MACSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1.2
fipsInfoFcoeFcfMacFCOE connection FCF MACSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1.3
fipsInfoFcoePortFCOE connection Port/Trunk Alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1.4
fipsInfoFcoeVlanFCOE connection VlanSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.14.3.1.3.2.1.5
.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoVlansTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::fipsInfoVlansTable'
The table of FCOE VLANs detected.
fipsInfoVlansEntry row .1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1
A FCOE VLAN in the fipsInfoVlans information table.
Column Syntax OID
fipsInfoVlansIdFCoE Vlan indexInteger32
Constraints:
range: 1-4095
.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1.1
fipsInfoVlansFeatureIndexFCoE Vlan feature index. The feature index will accept values
from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and
0 for the other types of VLANs.
Integer32
Constraints:
range: 0-8
.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1.2
fipsInfoVlansCreatorThe FCoE VLAN Creator.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1.3
fipsInfoVlansPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| |…
OctetString.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1.4
fipsInfoVlansTrunksThe FCoE VLAN trunk list.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.14.3.1.4.1.1.5
.1.3.6.1.4.1.20301.2.7.16.15.2.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmCurCfgGroupTable'
The table of VM groups in the current config
vmCurCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.16.15.2.1.1
Information about VM on a group in current config.
Column Syntax OID
vmCurCfgGroupIndexThe index of the vm group table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.1
vmCurCfgGroupVlanCurrent Vlan used by the group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.2
vmCurCfgGroupPortsThe port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.3
vmCurCfgGroupTagStateEnable VLAN tagging on all VM group ports.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.4
vmCurCfgGroupStgCurrent stg of the group vlan.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.5
vmCurCfgGroupProfileNameCurrent profile name used by the group.OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.17
vmCurCfgGroupValidateModeCurrent validation mode used by the group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.1.1.18
.1.3.6.1.4.1.20301.2.7.16.15.2.2 · 1 row entry · 22 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmNewCfgGroupTable'
The table of VM groups in the new config
vmNewCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.16.15.2.2.1
Information about VM on a group in new config.
Column Syntax OID
vmNewCfgGroupIndexThe index of the vm group table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.1
vmNewCfgGroupVlanSet Vlan to be used by the group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.2
vmNewCfgGroupPortsThe port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.3
vmNewCfgGroupAddVmAdd a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.4
vmNewCfgGroupRemVmRemove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.5
vmNewCfgGroupAddVmIdxAdd virtual MAC address by index to the group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.6
vmNewCfgGroupRemVmIdxRemove a virtual MAC address by index from the group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.7
vmNewCfgGroupAddPortIdxAdd a port to the group.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.8
vmNewCfgGroupRemPortIdxRemove a port from the group.PortNumberr/w.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.9
vmNewCfgGroupAddTrunkAdd trunk to the group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.10
vmNewCfgGroupRemTrunkRemove trunk from the group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.11
vmNewCfgGroupTagStateEnable VLAN tagging on all VM group ports.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.12
vmNewCfgGroupAddLacpKeyAdd LACP trunk to the group.Unsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.13
vmNewCfgGroupRemLacpKeyRemove LACP trunk from the group.Unsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.14
vmNewCfgGroupAddProfileAdd VM Profile to the group.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.15
vmNewCfgGroupRemProfileRemove any VM profile associated with the group.Enumerationr/w
Enumerated Values:
1remove
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.16
vmNewCfgGroupProfileNameNew profile name to be used by the group.OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.17
vmNewCfgGroupDeleteDelete VM Group.Enumerationr/w
Enumerated Values:
1delete
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.18
vmNewCfgGroupStgSet group vlan spanning tree group.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.19
vmNewCfgGroupValidateModeSet group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID.
Enumerationr/w
Enumerated Values:
0noValidation
1basicCheck
2advancedCheck
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.20
vmNewCfgGroupAddPortAliasAdd a port to the group, using it's alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.24
vmNewCfgGroupRemPortAliasRemove a port from the group, using it's alias.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.2.2.1.25
.1.3.6.1.4.1.20301.2.7.16.15.2.3 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmCurCfgGroupMacTable'
Virtual machine group current configuration table.
vmCurCfgGroupMaclistEntry row .1.3.6.1.4.1.20301.2.7.16.15.2.3.1
Information about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index
Column Syntax OID
vmCurCfgGroupMacGroupIndexThe group number for which the info is related.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.2.3.1.1
vmCurCfgGroupMacVMIndexThe virtual machine number for which the info is related.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.2.3.1.2
vmCurCfgGroupMacVMMacvirtual machine MAC address.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.15.2.3.1.3
.1.3.6.1.4.1.20301.2.7.16.15.2.4 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmNewCfgGroupMacTable'
virtual machine group new configuration table.
vmNewCfgGroupMaclistEntry row .1.3.6.1.4.1.20301.2.7.16.15.2.4.1
Information about virtual machine group
Column Syntax OID
vmNewCfgGroupMacGroupIndexThe group number for which the info is related.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.2.4.1.1
vmNewCfgGroupMacVMIndexThe virtual machine number for which the info is related.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.2.4.1.2
vmNewCfgGroupMacVMMacThe virtual machine MAC address.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.15.2.4.1.3
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1 · 1 row entry · 7 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmbwCurCfgTable'
The table of current VM Bandwidth configuration.
vmbwCurCfgEntry row .1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1
A row in the current VM bandwidth table.
Indexes
Column Syntax OID
vmbwCurCfgMacMAC address of VM for which bandwidth control information is related.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.1
vmbwCurCfgTxRateVM transmit bandwidth committed rate in kbps (ingress for switch).SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.2
vmbwCurCfgTxBurstVM transmit bandwidth max burst size in kilobits (ingress for switch).SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.3
vmbwCurCfgTxAclIdACL used for VM transmit bandwidth.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.4
vmbwCurCfgRxRateVM receive bandwidth committed rate in kbps (egress for switch).SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.5
vmbwCurCfgRxBurstVM receive bandwidth max burst size in kilobits (egress for switch).SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.6
vmbwCurCfgCtrlEnable/Disable VM bandwidth control entry.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.15.3.1.1.1.7
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmbwNewCfgTable'
The table of new VM Bandwidth configuration.
vmbwNewCfgEntry row .1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1
A row in the new VM bandwidth table.
Indexes
Column Syntax OID
vmbwNewCfgMacMAC address of VM for which bandwidth control information is related.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.1
vmbwNewCfgTxRateVM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.2
vmbwNewCfgTxBurstVM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.3
vmbwNewCfgTxAclIdACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.4
vmbwNewCfgRxRateVM receive bandwidth committed rate in kbps (egress for switch).
Set this to zero to disable receive bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.5
vmbwNewCfgRxBurstVM receive bandwidth max burst size in kilobits (egress for switch).
Set this to zero to disable receive bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.6
vmbwNewCfgCtrlVM bandwidth control entry statusEnumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.7
vmbwNewCfgDeleteThis is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2).
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.20301.2.7.16.15.3.1.2.1.8
.1.3.6.1.4.1.20301.2.7.16.15.4.1 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmCurCfgProfilesTable'
The table of VM profiles in the current config
vmCurCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.16.15.4.1.1
Information about a VM profile in current config.
Column Syntax OID
vmCurCfgProfileIndexThe index of the vm profiles table (1..32).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.1
vmCurCfgProfileNameVM Profile name.OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.2
vmCurCfgProfileVlanCurrent VM Profile VLAN IdSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.3
vmCurCfgProfileShapingAverageCurrent VM Profile Shaping Average.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.4
vmCurCfgProfileShapingBurstCurrent VM Profile Shaping Burst.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.5
vmCurCfgProfileShapingPeakCurrent VM Profile Shaping Peak.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.6
vmCurCfgProfileEgressShapingAverageCurrent VM Profile Egress Shaping Average.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.7
vmCurCfgProfileEgressShapingBurstCurrent VM Profile Egress Shaping Burst.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.8
vmCurCfgProfileEgressShapingPeakCurrent VM Profile Egress Shaping Peak.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.1.1.9
.1.3.6.1.4.1.20301.2.7.16.15.4.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmNewCfgProfilesTable'
The table of VM profiles in the current config
vmNewCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.16.15.4.2.1
Information about a VM profile in current config.
Column Syntax OID
vmNewCfgProfileIndexThe index of the vm profiles table (1..32).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.1
vmNewCfgProfileNameVM Profile name.OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.2
vmNewCfgProfileVlanVlan to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.3
vmNewCfgProfileShapingAverageShaping average to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.4
vmNewCfgProfileShapingBurstShaping burst to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.5
vmNewCfgProfileShapingPeakShaping peak to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.6
vmNewCfgProfileDeleteDelete VM Profile.Enumerationr/w
Enumerated Values:
1none
2delete
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.7
vmNewCfgProfileEgressShapingAverageEgress shaping average to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.8
vmNewCfgProfileEgressShapingBurstEgress shaping burst to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.9
vmNewCfgProfileEgressShapingPeakEgress shaping peak to be used by the VM profile.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.4.2.1.10
.1.3.6.1.4.1.20301.2.7.16.15.5.2 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareHostNameTable'
The table of names of VMware hosts in the Virtual Center.
virtVMwareHostNameEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.2.1
Information about names of VMware hosts in the Data Center.
Column Syntax OID
virtVMwareHostNameIndexThe index of the virtVMwareHostNameTable table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.2.1.1
virtVMwareHostNameUUIDThe UUID of a VMware host.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.2.1.2
virtVMwareHostNameIpAddressThe IP address of a VMware host.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.2.1.3
virtVMwareHostNameNameThe name of a VMware host.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.2.1.4
.1.3.6.1.4.1.20301.2.7.16.15.5.3 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareVMNameTable'
The table of VMware virtual machines in the Data Center.
virtVMwareVMNameEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.3.1
Information about VMware virtual machines in the Data Center.
Column Syntax OID
virtVMwareVMNameIndexThe index of the VMware virtual machine table in the Data Center.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.3.1.1
virtVMwareVMNameUUIDThe UUID of a virtual machine.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.3.1.2
virtVMwareVMNameVMwareNameThe name of a virtual machine given by VMware.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.3.1.3
virtVMwareVMNameOsNameThe name of a virtual machine given by the host OS.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.3.1.4
virtVMwareVMNameIpAddressThe IP address of a virtual machine.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.20301.2.7.16.15.5.3.1.5
.1.3.6.1.4.1.20301.2.7.16.15.5.5 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostVswitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareHostVswitchTable'
The table of Vswitches available on the specified host.
virtVMwareHostVswitchEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.5.1
Information about Vswitches available on the specified host.
Column Syntax OID
virtVMwareHostVswitchIndexThe index of the Vswitch table on the specified host.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.5.1.1
virtVMwareHostVswitchNameThe name of a Vswitch on the specified host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.5.1.2
.1.3.6.1.4.1.20301.2.7.16.15.5.6 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostPGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareHostPGTable'
The table of Port Groups available on the specified host.
virtVMwareHostPGEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.6.1
Information about Port Groups available on the specified host.
Column Syntax OID
virtVMwareHostPGIndexThe index of the Port Group table on the specified host.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.6.1.1
virtVMwareHostPGNameThe name of a Port Group on the specified host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.6.1.2
virtVMwareHostPGVswitchNameThe name of a Vswitch on the specified host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.6.1.3
.1.3.6.1.4.1.20301.2.7.16.15.5.7 · 1 row entry · 14 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostDetailInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareHostDetailInfoTable'
The table of detailed information available on the specified 
host/VM interface.
virtVMwareHostDetailInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.7.1
Detailed information available on the specified host/VM interface.
Column Syntax OID
virtVMwareHostDetailInfoIndexThe index of the detailed information table on the specified
host/VM interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.1
virtVMwareHostDetailInfoMACAddrThe MAC address of the host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.2
virtVMwareHostDetailInfoPortIdxThe port number of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.3
virtVMwareHostDetailInfoTypeInterface typeSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.4
virtVMwareHostDetailInfoIPAddrThe IP address of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.5
virtVMwareHostDetailInfoUUIDThe UUID of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.6
virtVMwareHostDetailInfoVswitchThe name of the virtual switch of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.7
virtVMwareHostDetailInfoPortGroupThe name of the port group of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.8
virtVMwareHostDetailInfoVlanIDThe VLAN ID of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.9
virtVMwareHostDetailInfoHostNameThe name of the specified host interface.
N/A for VMs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.10
virtVMwareHostDetailInfoVMVCenterNameThe name of the Virtual Center of the specified VM interface.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.11
virtVMwareHostDetailInfoVMOSHostNameThe name of the VM set by the host operating system.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.12
virtVMwareHostDetailInfoVMCurrentHostThe name of the host of the specified VM.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.13
virtVMwareHostDetailInfoPortAliasThe port alias of the specified host/VM interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.7.1.14
.1.3.6.1.4.1.20301.2.7.16.15.5.9 · 1 row entry · 13 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::virtVMwareVMInfoTable'
The table of networking information available on the 
specified VM.
virtVMwareVMInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.5.9.1
Detailed information available on the specified VM.
Column Syntax OID
virtVMwareVMInfoIndexThe index of the table with information on the
specified VM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.1
virtVMwareVMInfoMACAddrThe MAC address of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.2
virtVMwareVMInfoPortAliasThe port alias of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.3
virtVMwareVMInfoTypeInterface typeSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.4
virtVMwareVMInfoIPAddrThe IP address of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.5
virtVMwareVMInfoUUIDThe UUID of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.6
virtVMwareVMInfoVswitchThe name of the virtual switch of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.7
virtVMwareVMInfoPortGroupThe name of the port group of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.8
virtVMwareVMInfoVlanIDThe VLAN ID of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.9
virtVMwareVMInfoVMVCenterNameThe name of the Virtual Center of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.10
virtVMwareVMInfoVMOSHostNameThe name of the VM set by the host operating system.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.11
virtVMwareVMInfoVMCurrentHostThe name of the host of the specified VM.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.12
virtVMwareVMInfoPortIdxThe port number of the specified VM.PortNumber.1.3.6.1.4.1.20301.2.7.16.15.5.9.1.13
.1.3.6.1.4.1.20301.2.7.16.15.6.1.3 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk evbCurCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::evbCurCfgProfilesTable'
The table of EVB Profiles in the current config
evbCurCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.1.3.1
Information about EVB Profile in current config.
Column Syntax OID
evbCurCfgProfileIndexThe index of the evb profile table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.3.1.1
evbCurCfgRREnable RR on port.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.6.1.3.1.2
evbCurCfgVSIDiscEnable VSI Discover capability on port.Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.6.1.3.1.3
.1.3.6.1.4.1.20301.2.7.16.15.6.1.4 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk evbNewCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::evbNewCfgProfilesTable'
The table of EVB Profiles in the new config
evbNewCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.1.4.1
Information about EVB Profile in new config.
Column Syntax OID
evbNewCfgProfileIndexThe index of the evb profile table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.4.1.1
evbNewCfgRREnable RR on port.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.6.1.4.1.2
evbNewCfgVSIDiscEnable VSI Discover capability on port.Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.20301.2.7.16.15.6.1.4.1.3
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk evbCurCfgVsidbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::evbCurCfgVsidbTable'
The table of EVB VSI Database server in the current config
evbCurCfgVsidbEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1
Information about EVB VSI Database in current config.
Column Syntax OID
evbCurCfgVsidbIndexThe index of the evb vsi database server table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.1
evbCurCfgVsidbMgrIpVSI DB Manager IP address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.2
evbCurCfgVsidbPortVSI DB Manager Port.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.3
evbCurCfgVsidbDocpathVSI DB Document Path.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.4
evbCurCfgVsidbAlltypesVSI DB Document File.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.5
evbCurCfgVsidbIntervalVSI DB Update Interval in second.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.6
evbCurCfgVsidbPhyportThe port via that switch connects to VSI DB server, such as mgt, extm, data.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.7
evbCurCfgVsidbProtocolVSI DB Protocol, HTTP or HTTPS.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.1.5.1.8
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk evbNewCfgVsidbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::evbNewCfgVsidbTable'
The table of EVB VSI Database in the new config
evbNewCfgVsidbEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1
Information about EVB VSI Database in new config.
Column Syntax OID
evbNewCfgVsidbIndexThe index of the evb vsi database server table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.1
evbNewCfgVsidbMgrIpVSI DB Manager IP address.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.2
evbNewCfgVsidbPortVSI DB Manager Port.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.3
evbNewCfgVsidbDocpathVSI DB Document Path.OctetStringr/w
Constraints:
range: 0-127
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.4
evbNewCfgVsidbAlltypesVSI DB Document File.OctetStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.5
evbNewCfgVsidbIntervalVSI DB Update Interval in second, range from 5s to 300s, 0 means disable auto update.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.6
evbNewCfgVsidbPhyportThe port via that switch connects to VSI DB server, such as mgt, extm, data.OctetStringr/w
Constraints:
range: 0-7
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.7
evbNewCfgVsidbProtocolVSI DB Protocol, HTTP or HTTPS.OctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.20301.2.7.16.15.6.1.6.1.8
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1 · 1 row entry · 37 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vdpTLVInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vdpTLVInfoTable'
The table of associated VDP TLV Info.
vdpTLVInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1
Information about associated VDP TLV.
Column Syntax OID
vdpTLVInfoEntryIndexThe index of the vdp TLV info table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.1
vdpTLVTypeThe vdp TLV Type info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.2
vdpTLVLengthThe vdp TLV Length info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.3
vdpTLVOUIThe vdp TLV OUI info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.4
vdpTLVsubTypeThe vdp TLV Sub Type info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.5
vdpTLVRequestThe vdp TLV Request info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.6
vdpTLVRespThe vdp TLV Response info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.7
vdpTLVMgrIdThe vdp TLV Manager ID info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.8
vdpTLVTypeIDThe vdp TLV Type ID info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.9
vdpTLVInstanceIDThe vdp TLV instance ID info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.10
vdpTLVPortThe vdp TLV port info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.11
vdpTLVStagThe vdp TLV stag info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.12
vdpNumEntryThe vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.13
vdpTLVVlan1The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.14
vdpTLVmac1The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.15
vdpTLVVlan2The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.16
vdpTLVmac2The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.17
vdpTLVVlan3The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.18
vdpTLVmac3The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.19
vdpTLVVlan4The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.20
vdpTLVmac4The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.21
vdpTLVVlan5The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.22
vdpTLVmac5The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.23
vdpTLVVlan6The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.24
vdpTLVmac6The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.25
vdpTLVVlan7The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.26
vdpTLVmac7The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.27
vdpTLVVlan8The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.28
vdpTLVmac8The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.29
vdpTLVVlan9The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.30
vdpTLVmac9The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.31
vdpTLVVlan10The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.32
vdpTLVmac10The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.33
vdpTLVVlan11The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.34
vdpTLVmac11The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.35
vdpTLVVlan12The vdp TLV vlan info.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.36
vdpTLVmac12The vdp TLV mac info.OctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.1.1.37

vmsInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmsInfoTable'
The table of active VM Info.
vmsInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1
Information about active VMs.
Column Syntax OID
vmsInfoEntryIndexThe index of the active VM info table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.1
vmsInfoTypeIdThe VSI Type ID info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.2
vmsInfoVersionThe VSI Type version info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.3
vmsInfoMacThe VSI Mac info of the active VMOctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.4
vmsInfoVlanThe VSI vlan info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.5
vmsInfoPortIdxThe VSI port info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.6
vmsInfoTxACLThe VSI Tx ACL info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.7
vmsInfoRxEntryThe VSI Rx info of the active VMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.8
vmsInfoACLsThe ACL info of the active VMSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.9
vmsInfoPortAliasThe VSI port alias info of the active VMSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.2.1.11

vsiInfoTable

table
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vsiInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vsiInfoTable'
The table of vsi policy Info.
vsiInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1
Information about vsi policy.
Column Syntax OID
vsiInfoEntryIndexThe index of the vsi info table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.1
vsiInfoTypeIdThe VSI Type ID infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.2
vsiInfoVersionThe VSI Type version infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.3
vsiInfoMacThe VSI Mac InfoOctetString.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.4
vsiInfoVlanThe VSI vlan infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.5
vsiInfoPortIdxThe VSI port infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.6
vsiInfoTxACLThe VSI Tx ACL infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.7
vsiInfoRxEntryThe VSI Rx infoSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.8
vsiInfoPortAliasThe VSI port alias infoSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.3.1.9
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4 · 1 row entry · 10 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vsidbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vsidbInfoTable'
The table of VSI Database Info.
vsidbInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1
Information about VSI database
Column Syntax OID
vsidbInfoEntryIndexThe index of the VSI Database table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.1
vsidbInfoNameVSI Database Name.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.2
vsidbInfoTypeIdVSI Database Type Id.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.3
vsidbInfoVersionVSI Database Version.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.4
vsidbInfoManagerIdVSI Database Manager Id.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.5
vsidbInfoVlanIdsVSI Database VLAN List.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.6
vsidbInfoTxRateVSI Database Transmit Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.7
vsidbInfoTxBurstVSI Database Transmit Burst.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.8
vsidbInfoRxRateVSI Database Receive Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.9
vsidbInfoRxBurstVSI Database Receove Burst.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.4.1.10
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5 · 1 row entry · 25 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vsidbAclInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vsidbAclInfoTable'
The table of VSI Database ACLs Info.
vsidbAclInfoEntry row .1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1
Information about VSI database
Column Syntax OID
vsidbAclInfoEntryDbIndexThe index of the VSI Database table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.1
vsidbAclInfoEntryAclIndexThe index of the VSI Database ACLs table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.2
vsidbAclInfoTypeIdVSI Database Type Id.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.3
vsidbAclInfoVersionVSI Database Version.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.4
vsidbAclInfoManagerIdVSI Database Manager Id.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.5
vsidbAclInfoSrcMACAddressVSI Database ACL Source MAC address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.6
vsidbAclInfoSrcMACMaskVSI Database ACL Source MAC address mask.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.7
vsidbAclInfoDstMACAddressVSI Database ACL Destination MAC address.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.8
vsidbAclInfoDstMACMaskVSI Database ACL Destination MAC address mask.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.9
vsidbAclInfoVlanIdVSI Database ACL Virtual LAN value.Integer32
Constraints:
range: 0-4095
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.10
vsidbAclInfoEthernetTypeVSI Database ACL Ethernet type value,
'none' for not initialised,
within the ranger 1536-65535.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.13
vsidbAclInfoSrcIPAddressVSI Database ACL Source IP Address,
only available when EthernetType is IPv4(0x0800).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.14
vsidbAclInfoSrcIPMaskVSI Database ACL Source IP Address mask,
only available when EthernetType is IPv4(0x0800).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.15
vsidbAclInfoDstIPAddressVSI Database ACL Destination IP Address,
only available when EthernetType is IPv4(0x0800).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.16
vsidbAclInfoDstIPMaskVSI Database ACL Destination IP Address mask,
only available when EthernetType is IPv4(0x0800).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.17
vsidbAclInfoTypeOfServiceVSI Database ACL Type Of Service value,
only available when EthernetType is IPv4(0x0800),
'none' for not initialised,
within the ranger 0-255.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.18
vsidbAclInfoProtocolVSI Database ACL IP protocol,
only available when EthernetType is IPv4(0x0800),
'none' for not initialised,
within the ranger 0-255.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.19
vsidbAclInfoTCPFlagsVSI Database ACL TCP Flags value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.20
vsidbAclInfoTCPFlagsMaskVSI Database ACL TCP Flags mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.21
vsidbAclInfoSrcPortVSI Database ACL Source TCP/UDP Port value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.22
vsidbAclInfoSrcPortMaskVSI Database ACL Source TCP/UDP Port mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.23
vsidbAclInfoDstPortVSI Database ACL Destination TCP/UDP Port value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.24
vsidbAclInfoDstPortMaskVSI Database ACL Destination TCP/UDP Port mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.25
vsidbAclInfoActionVSI Database ACL ActionSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.26
vsidbAclInfoNewPrioVSI Database ACL New Pirority value,
only available when Action includes 'setpriority',
'none' for not initialised.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.6.2.5.1.27
.1.3.6.1.4.1.20301.2.7.16.15.8.2 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyCurCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmReadyCurCfgOuiTbl'
The table of current VM Ready OUI configuration.
vmReadyCurCfgOuiEntry row .1.3.6.1.4.1.20301.2.7.16.15.8.2.1
A row in the current VM Ready OUI table.
Column Syntax OID
vmReadyCurCfgOuiMacIdxOUI of locally administred MAC addressSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.8.2.1.1
vmReadyCurCfgOuiMacOUI of locally administred MAC addressSNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.2.7.16.15.8.2.1.2
vmReadyCurCfgVendorVendor name of the OUI locally administredSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.8.2.1.3
.1.3.6.1.4.1.20301.2.7.16.15.8.3 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyNewCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::vmReadyNewCfgOuiTbl'
The table of new VM Ready OUI configuration.
vmReadyNewCfgOuiEntry row .1.3.6.1.4.1.20301.2.7.16.15.8.3.1
A row in the new VM Ready OUI table.
Column Syntax OID
vmReadyNewCfgOuiMacIdxOUI of locally administred MAC addressSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.15.8.3.1.1
vmReadyNewCfgOuiMacNew OUI of locally administred MAC address
Format xx:yy:zz
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.8.3.1.2
vmReadyNewCfgVendorVendor name of the OUI locally administredSNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.15.8.3.1.3
vmReadyNewCfgDeleteIf set the OUI of the locally administred MAC would be deletedEnumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.20301.2.7.16.15.8.3.1.4
.1.3.6.1.4.1.20301.2.7.16.20.6.4 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoControllerTable'
The table of NSX Gateway Controller's entries.
nsxGwInfoControllerEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.4.1
A row in the NSX Gateway Controller table.
Column Syntax OID
nsxGwInfoControllerIdxThe index of an entry in NSX Controller table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.4.1.1
nsxGwInfoControllerIpThe IP address of an entry in NSX Controller table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.4.1.2
nsxGwInfoControllerInactProbeThe InactProbe value of an entry in NSX Controller table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.4.1.3
nsxGwInfoControllerMaxBackoffThe MaxBackoff value of an entry in NSX Controller table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.4.1.4
.1.3.6.1.4.1.20301.2.7.16.20.6.6 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoPortTable'
The table of ports entries of NSX Gateway.
nsxGwInfoPortEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.6.1
A row in the port's table of NSX Gateway.
Column Syntax OID
nsxGwInfoPortIdxThe index of an entry in port table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.6.1.1
nsxGwInfoPortNameThe name port of the entry in port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.6.1.2
nsxGwInfoPortVniThe VNI of an entry in port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.6.1.3
nsxGwInfoPortVlanThe Vlan of an entry in port table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.6.1.4
nsxGwInfoPortStatusThe status of an entry in port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.6.1.5
.1.3.6.1.4.1.20301.2.7.16.20.6.8 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoLocalUcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoLocalUcastTable'
The table of Local unicast entries.
nsxGwInfoLocalUcastEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.8.1
A row in the Local unicast table.
Column Syntax OID
nsxGwInfoLocalUcastIdxThe index of an entry in local unicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.1
nsxGwInfoLocalUcastVniThe VNI of an entry in local unicast table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.2
nsxGwInfoLocalUcastMacThe mac address of an entry in local unicast table.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.3
nsxGwInfoLocalUcastTunnelThe tunnel IP Address of an entry in local unicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.4
nsxGwInfoLocalUcastPortThe port name of an entry in local unicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.5
nsxGwInfoLocalUcastVlanThe vlan of an entry in local unicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.8.1.6
.1.3.6.1.4.1.20301.2.7.16.20.6.10 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoRemoteUcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoRemoteUcastTable'
The table of remote unicast entries.
nsxGwInfoRemoteUcastEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.10.1
A row in the remote unicast table.
Column Syntax OID
nsxGwInfoRemoteUcastIdxThe index of an entry in remote unicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.1
nsxGwInfoRemoteUcastVniThe VNI of an entry in remote unicast table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.2
nsxGwInfoRemoteUcastMacThe mac address of an entry in remote unicast table.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.3
nsxGwInfoRemoteUcastTunnelThe tunnel IP Address of an entry in remote unicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.4
nsxGwInfoRemoteUcastPortThe port name of an entry in remote unicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.5
nsxGwInfoRemoteUcastVlanThe vlan of an entry in remote unicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.10.1.6
.1.3.6.1.4.1.20301.2.7.16.20.6.12 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoLocalMcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoLocalMcastTable'
The table of Local multicast entries.
nsxGwInfoLocalMcastEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.12.1
A row in the Local multicast table.
Column Syntax OID
nsxGwInfoLocalMcastIdxThe index of an entry in local multicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.12.1.1
nsxGwInfoLocalMcastVniThe VNI of an entry in local multicast table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.12.1.2
nsxGwInfoLocalMcastMacThe mac address of an entry in local multicast table.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.20.6.12.1.3
nsxGwInfoLocalMcastTunnelThe tunnel IP Address of an entry in local multicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.12.1.4
.1.3.6.1.4.1.20301.2.7.16.20.6.14 · 1 row entry · 4 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoRemoteMcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoRemoteMcastTable'
The table of remote multicast entries.
nsxGwInfoRemoteMcastEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.14.1
A row in the remote multicast table.
Column Syntax OID
nsxGwInfoRemoteMcastIdxThe index of an entry in remote multicast table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.14.1.1
nsxGwInfoRemoteMcastVniThe VNI of an entry in remote multicast table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.14.1.2
nsxGwInfoRemoteMcastMacThe mac address of an entry in remote multicast table.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.20301.2.7.16.20.6.14.1.3
nsxGwInfoRemoteMcastTunnelThe Tunnel of an entry in remote multicast table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.14.1.4
.1.3.6.1.4.1.20301.2.7.16.20.6.16 · 1 row entry · 3 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoVirtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoVirtNetTable'
The table of virtual networks entries.
nsxGwInfoVirtNetEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.16.1
A row in the virtual network table.
Column Syntax OID
nsxGwInfoVirtNetIdxThe index of an entry in virtual network table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.16.1.1
nsxGwInfoVirtNetVniThe VNI of an entry in virtual network table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.16.1.2
nsxGwInfoVirtNetNameThe name of an entry in virtual network table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.16.1.3
.1.3.6.1.4.1.20301.2.7.16.20.6.18 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoVirtPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoVirtPortTable'
The table of virtual port entries.
nsxGwInfoVirtPortEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.18.1
A row in the virt port table.
Column Syntax OID
nsxGwInfoVirtPortIdxThe index of an entry in virtual port table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.18.1.1
nsxGwInfoVirtPortNameThe port name of an entry in virtual port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.18.1.2
nsxGwInfoVirtPortVnidThe VNID an entry in virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.6.18.1.3
nsxGwInfoVirtPortRemoteTepThe remote tunnel IP Address of an entry in virtual port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.18.1.4
nsxGwInfoVirtPortVlanThe vlan of an entry in virtual port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.18.1.5
.1.3.6.1.4.1.20301.2.7.16.20.6.20 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwInfoTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwInfoTunnelTable'
The table of tunnel entries.
nsxGwInfoTunnelEntry row .1.3.6.1.4.1.20301.2.7.16.20.6.20.1
A row in the tunnel table.
Column Syntax OID
nsxGwInfoTunnelIdxThe index of an entry in tunnel table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.6.20.1.1
nsxGwInfoTunnelIpThe tunnel IP Address of an entry in tunnel table.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.20.6.20.1.2
nsxGwInfoTunnelRemoteIpThe tunnel remote IP Address of an entry in tunnel table.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.20301.2.7.16.20.6.20.1.3
nsxGwInfoTunnelTypeThe tunnel type of an entry in tunnel table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.20.1.4
nsxGwInfoTunnelStatusThe tunnel status of an entry in tunnel table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.6.20.1.5
.1.3.6.1.4.1.20301.2.7.16.20.7.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwStatsVirtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwStatsVirtNetTable'
The table of tunnel entries.
nsxGwStatsVirtNetEntry row .1.3.6.1.4.1.20301.2.7.16.20.7.2.1
A row in the statistics virtual networks table.
Column Syntax OID
nsxGwStatsVirtNetIdxThe index of an entry in statistics virtual networks table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.1
nsxGwStatsVirtNetVnidThe Vni of an entry in statistics virtual networks table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.2
nsxGwStatsVirtNetPktsInThe number of IN packets of an entry in statistics virtual networks table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.3
nsxGwStatsVirtNetPktsOutThe number of OUT packets of an entry in statistics virtual networks table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.4
nsxGwStatsVirtNetBytesInThe number of IN bytes of an entry in statistics virtual networks table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.5
nsxGwStatsVirtNetBytesOutThe number of OUT bytes of an entry in statistics virtual networks table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.2.1.6
.1.3.6.1.4.1.20301.2.7.16.20.7.4 · 1 row entry · 8 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nsxGwStatsVirtPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::nsxGwStatsVirtPortTable'
The table of tunnel entries.
nsxGwStatsVirtPortEntry row .1.3.6.1.4.1.20301.2.7.16.20.7.4.1
A row in the statistics virtual port table.
Column Syntax OID
nsxGwStatsVirtPortIdxThe index an entry in statistics virtual port table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.1
nsxGwStatsVirtPortNameThe port name of an entry in statistics virtual port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.2
nsxGwStatsVirtPortVnidThe Vni of an entry in statistics virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.3
nsxGwStatsVirtPortTepThe tunnel IP address of an entry in statistics virtual port table.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.4
nsxGwStatsVirtPortPktsInThe number of IN packets of an entry in statistics virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.5
nsxGwStatsVirtPortPktsOutThe number of OUT packets of an entry in statistics virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.6
nsxGwStatsVirtPortBytesInThe number of IN bytes of an entry in statistics virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.7
nsxGwStatsVirtPortBytesOutThe number of OUT bytes of an entry in statistics virtual port table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.20301.2.7.16.20.7.4.1.8

ifMainTable

table
.1.3.6.1.4.1.20301.100.27.1.4 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ifMainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ifMainTable'
A list of all the interface entries in the system. 
This table contains objects which are applicable to all
types of interfaces in the system. This table is a 
proprietary extension to the standard ifTable and 
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex.
ifMainEntry row .1.3.6.1.4.1.20301.100.27.1.4.1
An entry containing management information applicable
to a particular interface.
Indexes
Column Syntax OID
ifMainIndexA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.20301.100.27.1.4.1.1
ifMainPortNameThis is used to assign a alias to a portSNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.100.27.1.4.1.9
.1.3.6.1.4.1.20301.100.81.2.2 · 1 row entry · 6 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ibmnosPortCtrlTable'
A table to control the port specific parameters of the device like speed,
duplex mode, etc.
ibmnosPortCtrlEntry row .1.3.6.1.4.1.20301.100.81.2.2.1
An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.
Column Syntax OID
ibmnosPortCtrlIndexInterface index of the port for which the configuration
in this entry applies.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.20301.100.81.2.2.1.1
ibmnosPortCtrlModeSpeficies the mode in which the speed, duplex modes and flow control
of the interface is determined.

If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link …
Enumerationr/w
Enumerated Values:
1auto
2noNegotiation
.1.3.6.1.4.1.20301.100.81.2.2.1.2
ibmnosPortCtrlDuplexConfigures interface data transfer mode as full-duplex or half-duplex.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value '…
Enumerationr/w
Enumerated Values:
1full
2half
3any
.1.3.6.1.4.1.20301.100.81.2.2.1.3
ibmnosPortCtrlSpeedConfigures interface speed.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'
Enumerationr/w
Enumerated Values:
1tenMBPS
2hundredMBPS
3oneGB
4tenGB
5any
.1.3.6.1.4.1.20301.100.81.2.2.1.4
ibmnosPortCtrlFlowControlEnables / disables flow control for the interface.

This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negot…
Enumerationr/w
Enumerated Values:
1enable
2disable
3send
4receive
.1.3.6.1.4.1.20301.100.81.2.2.1.5
ibmnosPortCtrlAliasThe port alias.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20301.100.81.2.2.1.10
.1.3.6.1.4.1.20301.100.100.2.1 · 1 row entry · 2 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ibmnosPortCfgTable'
The table of port configuration in the new_configuration block.
ibmnosPortCfgTableEntry row .1.3.6.1.4.1.20301.100.100.2.1.1
A row in the port configuration table in the new_configuration block.
Column Syntax OID
ibmnosPortCfgIndxThe index of the row in port configurations table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.2.1.1.1
ibmnosPortCfgVlanTagVLAN tag configured for the portEnumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.20301.100.100.2.1.1.2
.1.3.6.1.4.1.20301.100.100.13.5 · 1 row entry · 9 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ibmnosFdbTable'
The table of FDB entries.
ibmnosFdbEntry row .1.3.6.1.4.1.20301.100.100.13.5.1
A row in the FDB table
Column Syntax OID
ibmnosFdbVlanThe VLAN ID for the FDB entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.13.5.1.1
ibmnosFdbMacAddrThe MAC address for the FDB entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.20301.100.100.13.5.1.2
ibmnosFdbMacAddrStrThe MAC address in hex format for the FDB entry. This node is added for
display purpose.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.20301.100.100.13.5.1.3
ibmnosFdbVlanIdThe VLAN ID for the FDB entry. This node is added for display purpose.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.13.5.1.4
ibmnosFdbSrcPortEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been l…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.13.5.1.5
ibmnosFdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.13.5.1.6
ibmnosFdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2forward
3trunk
.1.3.6.1.4.1.20301.100.100.13.5.1.7
ibmnosFdbStatus'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.13.5.1.10
ibmnosFdbClearMacSetting this value to clear(2) clears the corresponding table entry in FDB.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.20301.100.100.13.5.1.11
.1.3.6.1.4.1.20301.100.100.14.22 · 1 row entry · 5 columns
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosSfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8332-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8332-MIB::ibmnosSfpInfoTable'
The table of external port SFP information.
ibmnosSfpInfoTableEntry row .1.3.6.1.4.1.20301.100.100.14.22.1
A row in the external port SFP information table.
Column Syntax OID
ibmnosSfpInfoIndxSfp Info index (port number)SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20301.100.100.14.22.1.1
ibmnosSfpInfoDescriptionType Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))Enumeration
Enumerated Values:
0none
1sfp
2cx4
3sfpplus
6dac
.1.3.6.1.4.1.20301.100.100.14.22.1.2
ibmnosSfpInfoSerialNumberSerial Number.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.100.100.14.22.1.3
ibmnosSfpInfoPartNumberPart Number.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.100.100.14.22.1.4
ibmnosSfpInfoHWRevisionHardware RevisionOctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.20301.100.100.14.22.1.5