LENOVO-GbTOR-G8264CS-SIF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
224
Rows
224
Columns
1,782

agCurCfgTrapHostTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.1.184 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agCurCfgTrapHostTable' 
The table of current trap hosts configure.
agCurCfgTrapHostEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1
A trap host configuration on the switch.
Indexes
Column Syntax OID
agCurCfgTrapHostIndex
The trap host index. Valid range is 1-16
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.1
agCurCfgTrapHostAddress
The trap host address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.2
agCurCfgTrapHostCommStr
The trap host community string.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.3

agNewCfgTrapHostTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.1.185 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agNewCfgTrapHostTable' 
The table for trap host definitions in the new configuration block.
agNewCfgTrapHostEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1
A row in the trap host definition table
Indexes
Column Syntax OID
agNewCfgTrapHostIndex
The trap host index. Valid range is 1-16
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.1
agNewCfgTrapHostAddress
The trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.2
agNewCfgTrapHostCommStr
The trap host community string in the new configuration block.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.3
agNewCfgTrapHostDelete
By setting the value to delete(2), the entire row is deleted.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.4

agPortCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.2.2 · 1 row entry · 23 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agPortCurCfgTable' 
The table of port configuration in the current configuration block.
agPortCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1
A row in the port table in the current configuration block.
Indexes
Column Syntax OID
agPortCurCfgIndx
The index of the row in port configurations table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.1
agPortCurCfgState
This is the state of the port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.2
agPortCurCfgVlanTag
This is VLAN tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.3
agPortCurCfgRmon
This object is used to turn RMON on or off on the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.5
agPortCurCfgPVID
The default VLAN ID for the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.6
agPortCurCfgGigEthAutoNeg
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.11
agPortCurCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.12
agPortCurCfgPortName
The switch port name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.13
agPortCurCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.16
agPortCurCfgGigEthSpeed
Selects the port speed for Gigabit Ethernet connection.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
6mbs10000
7mbs40000
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.21
agPortCurCfgGigEthMode
This object is used to select port mode for Gigabit Ethernet connection.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4any
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.22
agPortCurCfgDscpRemarking
Enable or disable Dscp remarking for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.23
agPortCurCfgPortAlias
The switch port alias.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.24
agPortCurCfgTagPVID
This is PVID tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.25
agPortCurCfgLearning
Enable or disable L2 (FDB) Learning for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.26
agPortCurCfgType
The switch port type.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.29
agPortCurCfgErrDisableRecovery
This object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has el…
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.35
agPortCurCfgTagiPVID
This is ingress PVID tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.49
agPortCurCfgUcBw
Current value of unicast bandwidth
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.60
agPortCurCfgPrivateVlanStatus
Current state of Private VLAN on this port
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.61
agPortCurCfgMappedPrimaryVlans
Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.62
agPortCurCfgAssociatedSecondaryVlans
Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.63
agPortCurCfgSpeed1G
Limit the port to 1G speed
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.69

agPortNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.2.3 · 1 row entry · 27 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agPortNewCfgTable' 
The table of port configuration in the new configuration block.
agPortNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1
A row in the port configuration table in the new configuration block.
Indexes
Column Syntax OID
agPortNewCfgIndx
The index of the row in port configurations table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.1
agPortNewCfgState
This is the state of the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.2
agPortNewCfgVlanTag
This is VLAN tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.3
agPortNewCfgRmon
This object is used to turn RMON on or off on the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.5
agPortNewCfgPVID
The default VLAN ID for the port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.6
agPortNewCfgGigEthAutoNeg
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.11
agPortNewCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.12
agPortNewCfgPortName
The switch port name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.13
agPortNewCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.16
agPortNewCfgGigEthSpeed
Selects the port speed for Gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
6mbs10000
7mbs40000
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.21
agPortNewCfgGigEthMode
This object is used to select port mode for Gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4any
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.22
agPortNewCfgDscpRemarking
Enable or disable Dscp remarking for the switch port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.23
agPortNewCfgTagPVID
This is PVID tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.25
agPortNewCfgLearning
Enable or disable L2 (FDB) Learning for the switch port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.26
agPortNewCfgType
The switch port type.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.29
agPortNewCfgErrDisableRecovery
This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.35
agPortNewCfgTagiPVID
This is ingress PVID tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.49
agPortNewCfgUcBw
Set port unicast bandwidth
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.60
agPortNewCfgPrivateVlanStatus
Enable or disable the Private VLAN on this port
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.61
agPortNewCfgMappedPrimaryVlans
Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.62
agPortNewCfgAddPrimaryVlan
Adds the port to the specified primary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.63
agPortNewCfgDelPrimaryVlan
Removes the port from the specified primary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.64
agPortNewCfgAssociatedSecondaryVlans
Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.65
agPortNewCfgAddSecondaryVlan
Adds the port to the specified secondary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.66
agPortNewCfgDelSecondaryVlan
Removes the port from the secondary VLAN. A '0' value is
returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.67
agPortNewCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.68
agPortNewCfgSpeed1G
Limit the port to 1G speed
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.69

ntpCurCfgMdkeyTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.4.28 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ntpCurCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ntpCurCfgMdkeyTable' 
The table of NTP MD5/SHA-1 keys in the current configuration block.
ntpCurCfgMdkeyEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1
Information about an NTP MD5/SHA-1 keys table.
Indexes
Column Syntax OID
ntpCurCfgMdkeyIndex
The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.1
ntpCurCfgMdkeyKey
The character string representing the MD5/SHA-1 Key.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.2
ntpCurCfgKeyType
The NTP Key type,0: MD5, 1: SHA-1.
Enumeration
Enumerated Values:
0md5
1sha-1
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.3

ntpNewCfgMdkeyTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.4.29 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ntpNewCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ntpNewCfgMdkeyTable' 
The table of NTP MD5/SHA-1 keys in the current configuration block.
ntpNewCfgMdkeyEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1
Information about an NTP MD5/SHA-1 keys table.
Indexes
Column Syntax OID
ntpNewCfgMdkeyIndex
The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.1
ntpNewCfgMdkeyKey
The character string representing the MD5/SHA-1 Key.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.2
ntpNewCfgMdkeyDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.3
ntpNewCfgKeyType
The NTP key type. 0: MD5, 1: SHA-1.
Enumerationr/w
Enumerated Values:
0md5
1sha-1
 .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.4

agSyslogMsgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.5.11 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agSyslogMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agSyslogMsgTable' 
The table of syslog messages.
agSyslogMsgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1
A syslog message stored on the switch.
Indexes
Column Syntax OID
agSyslogMsgIndex
The syslog message table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.1
agSyslogMessage
The syslog message.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.2

agSyslogMsgTableFabric

table
.1.3.6.1.4.1.20301.2.7.21.1.1.5.30 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agSyslogMsgTableFabric
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agSyslogMsgTableFabric' 
The table of syslog messages.
agSyslogMsgTableEntryRev row .1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1
A syslog message stored on the switch.
Indexes
Column Syntax OID
agSyslogSwitchNumber
The configured switch number of any switch, which is part of the node.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.1
agSyslogMsgIndexRev
The syslog message table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.2
agSyslogMessageRev
The syslog message.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.3

agApplyTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.8.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agApplyTable' 
The table of failure reasons for an apply of current
configuration block changes.
agApplyTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1
A row in the table of failure reasons for an apply
(information about a particular reason of failure).
Indexes
Column Syntax OID
agApplyIndex
The table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.1
agApplyString
A string in the apply table.
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.2

agTacacsUserMapCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.11.39 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agTacacsUserMapCurCfgTable' 
The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1
A row in the tacacs+ user mapping table.
Indexes
Column Syntax OID
agTacacsUserMapCurCfgUId
The current config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.1
agTacacsUserMapCurCfgMapping
Current Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumeration
Enumerated Values:
0none
1user
2oper
3admin
 .1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.2

agTacacsUserMapNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.11.40 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agTacacsUserMapNewCfgTable' 
The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1
A row in the tacacs+ user mapping table.
Indexes
Column Syntax OID
agTacacsUserMapNewCfgUId
The new config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.1
agTacacsUserMapNewCfgMapping
Set new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumerationr/w
Enumerated Values:
0none
1user
2oper
3admin
 .1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.2

agCurCfgMgmtNetTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.12.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agCurCfgMgmtNetTable' 
The table for Management Network definitions
in the current configuration block.
agCurCfgMgmtNetEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1
A row in the management network definition table.
Indexes
Column Syntax OID
agCurCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.1
agCurCfgMgmtNetSubnet
The Management Network Address in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.2
agCurCfgMgmtNetMask
The Management Network Mask/Prefix Length in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.3

agNewCfgMgmtNetTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.12.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agNewCfgMgmtNetTable' 
The table for Management Network definitions
in the new configuration block.
agNewCfgMgmtNetEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1
A row in the management network definition table.
Indexes
Column Syntax OID
agNewCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.1
agNewCfgMgmtNetSubnet
The Management Network Address in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.2
agNewCfgMgmtNetMask
The Management Network Mask/Prefix length in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.3
agNewCfgMgmtNetDelete
By setting the value to delete(2), the entire row is deleted.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.4

agCfgBootCurTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.13.7 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCfgBootCurTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agCfgBootCurTable' 
The table of currently booted settings for the switches.
agCfgBootCurEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1
Currently booted settings for a switches.
Indexes
Column Syntax OID
agCfgBootCurSwNumIndx
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.1
agCfgBootCurMTM
This object specifies the current value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)
Enumeration
Enumerated Values:
1mtmValue1
2mtmValue2
3mtmValue3
4mtmValue4
5mtmValue5
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.2
agCfgBootCurESN
The current ESN of the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.3

agCfgBootNewTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.13.8 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCfgBootNewTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agCfgBootNewTable' 
The table of the current booted settings saved for the next reboot.
agCfgBootNewEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1
Current booted settings saved for the next reboot.
Indexes
Column Syntax OID
agCfgBootNewSwNumIndx
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.1
agCfgBootNewMTM
This object specifies the current value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)
Enumerationr/w
Enumerated Values:
1mtmValue1
2mtmValue2
3mtmValue3
4mtmValue4
5mtmValue5
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.2
agCfgBootNewESN
Configure the ESN of the switch.
OctetStringr/w
Constraints:
range: 7-11
 .1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.3

agAccessUserCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.19.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agAccessUserCurCfgTable' 
The table of Access user configuration.
agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1
A row in the Access user configuration table.
Indexes
Column Syntax OID
agAccessUserCurCfgUId
The User identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.1
agAccessUserCurCos
The user class of service.
Enumeration
Enumerated Values:
0user
3oper
6admin
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.2
agAccessUserCurCfgName
The user name. Please note, the max length is 8 in fabric mode.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.3
agAccessUserCurCfgPswd
The character string representing the user password.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.4
agAccessUserCurCfgState
User validation (enabled or disabled) in current
configuration block.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.6

agAccessUserNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.19.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agAccessUserNewCfgTable' 
The table of Access user configuration.
agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1
A row in the Access user configuration table.
Indexes
Column Syntax OID
agAccessUserNewCfgUId
The User identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.1
agAccessUserNewCos
The user class of service.
Enumerationr/w
Enumerated Values:
0user
3oper
6admin
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.2
agAccessUserNewCfgName
The user name. Please note, the max length is 8 in fabric mode.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.3
agAccessUserNewCfgPswd
The character string representing the user password.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.4
agAccessUserNewCfgState
User validation (enabled or disabled) in new
configuration block.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.7
agAccessUserNewCfgDelete
This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.8

ldapHostCurConfigTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.21.46 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostCurConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ldapHostCurConfigTable' 
The table for user specified host.
ldapHostCurConfigTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1
A row in the user specified host table.
Indexes
Column Syntax OID
ldapHostCurConfigIndex
The index of the user specified host table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.1
ldapHostCurAddr
Specify the group addr.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.2
ldapHostCurPort
Specify the group port.
Integer32
Constraints:
range: 1-65000
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.3
ldapHostCurPortType
Specify the host port type.
data-port: Data port
mgt-port: Management port
Enumeration
Enumerated Values:
0data-port
1mgt-port
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.4

ldapHostNewConfigTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.21.47 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostNewConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ldapHostNewConfigTable' 
The table for user specified host.
ldapHostNewConfigTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1
A row in the user specified host table.
Indexes
Column Syntax OID
ldapHostNewConfigIndex
The index of the user specified host table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.1
ldapHostNewAddr
Specify the group addr.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.2
ldapHostNewPort
Specify the host port.
Integer32r/w
Constraints:
range: 1-65000
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.3
ldapHostNewPortType
Specify the host port type.
data-port: Data port
mgt-port: Management port
Enumerationr/w
Enumerated Values:
0data-port
1mgt-port
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.4
ldapHostNewCfgDelete
This is an action object to create or delete a host.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a host
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.5

sshPubKeyConfigTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.22.15 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sshPubKeyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::sshPubKeyConfigTable' 
The table for ssh public keys and its users.
sshPubKeyConfigEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1
A row in the ssh public keys tables.
Indexes
Column Syntax OID
sshPubKeyConfigIndex
The index of the ssh public key entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.1
sshPubKeyType
Specify the type of the public key.
Enumeration
Enumerated Values:
1rsa
2dsa
 .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.2
sshPubKeyHashValue
The hash value of a specific public key.
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.3
sshPubkeyUserBmap
The user list in the key entry. The user are presented in bitmap format.
as follows:

OCTET 1 OCTET 2 OCTET 3 OCTET 4
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|| | | |||| ||__…
OctetString .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.4
sshPubKeyAddUser
Add a new user to a particular public key.
Reminder: The user must be a valid system user.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.5
sshPubKeyDelUser
Remove a user from the user list of the public key entry.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.6
sshPubKeyRemEntry
Remove a public key entry.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.7

sflowCurPortCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.24.7 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::sflowCurPortCfgTable' 
The table of sFlow port configuration.
sflowCurPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1
A row in the sFlow port configuration table.
Indexes
Column Syntax OID
sflowCurPortCfgTableId
sFlow port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.1
sflowCurPortSampling
The current sFlow port sampling rate.
Integer32
Constraints:
range: 256-65536
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.2
sflowCurPortPolling
The current sFlow port polling interval.
Integer32
Constraints:
range: 5-60
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.3
sflowCurPortCfgPortAlias
The current sFlow port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.4

sflowNewPortCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.24.8 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::sflowNewPortCfgTable' 
The table of sFlow port configuration.
sflowNewPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1
A row in the sFlow port configuration table.
Indexes
Column Syntax OID
sflowNewPortCfgTableId
sFlow port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.1
sflowNewPortSampling
The new sFlow port sampling rate.
Valid range: 256-65536| 0 for disable
Integer32r/w
Constraints:
range: 256-65536
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.2
sflowNewPortPolling
The new sFlow port polling interval.
Valid range: 5-60| 0 for disable
Integer32r/w
Constraints:
range: 5-60
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.3
sflowNewPortCfgPortAlias
The new sFlow port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.4

agQsfp40GCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.26.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agQsfp40GCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agQsfp40GCfgTable' 
The QSFP 40G ports configuration table
qsfp40GPortEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1
A row in the QSFP 40G configuration table
Indexes
Column Syntax OID
qsfpPortNumber
The port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.1
qsfpPortBootedMode
The booted port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.
Enumeration
Enumerated Values:
1mode10G
2mode40G
 .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.2
qsfpPortSavedMode
The saved port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.
Enumerationr/w
Enumerated Values:
1mode10G
2mode40G
 .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.3
qsfpPortAlias
The port alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.4

agPortMapCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.30.4 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortMapCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agPortMapCfgTable' 
The Port Map configuration table
portMapEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1
A row in the Port Map configuration table
Indexes
Column Syntax OID
pmapPortNumber
The port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.1
pmapPortState
The port configuration,
either unmapped(0) for ports that are not mapped, or
mapped(1) for mapped ports.
Enumerationr/w
Enumerated Values:
0unmapped
1mapped
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.3
pmapPortAlias
The Port Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.4

agPortMapSwitchTable

table
.1.3.6.1.4.1.20301.2.7.21.1.1.30.5 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortMapSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agPortMapSwitchTable' 
The Port Map per switch number information table
portMapSwitchEntry row .1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1
Port Map information for a switch number
Indexes
Column Syntax OID
pmapSwNumber
The configured switch number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.1
pmapSwMaxBandwidth
The maximum allowed bandwidth
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.2
pmapSwUsedBandwidth
The bandwidth used in the saved configuration
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.4

mpCpuStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mpCpuStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::mpCpuStatsTable' 
The table of CPU utilization statistics. It is deprecated.
mpCpuStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1
A row in the CPU utilization stats table. It is deprecated.
Indexes
Column Syntax OID
mpCpuSwitchNumber
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.1
mpCpuSwitchUUID
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.2
mpCpuStatsUtil1Second
The utilization of MP CPU over 1 second. It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.3
mpCpuStatsUtil5Seconds
The utilization of MP CPU over 5 seconds. It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.4
mpCpuStatsUtil1Minute
The utilization of MP CPU over 1 minute. It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.5
mpCpuStatsUtil5Minutes
The utilization of MP CPU over 5 minutes. It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.6

cpuUtilProcessStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.2.5 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::cpuUtilProcessStatsTable' 
The table of CPU utilization per process statistics. It is deprecated.
cpuUtilProcessStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1
A row in the CPU utilization stats per process table. It is deprecated.
Indexes
Column Syntax OID
processSwitchNumber
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.1
processId
The process ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.2
processSwitchUUID
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.3
processName
Process Name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.4
cpuProcessUtil1Sec
The utilization of MP CPU over 1 second.
It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.5
cpuProcessUtil5Sec
The utilization of MP CPU over 5 seconds.
It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.6
cpuProcessUtil1Min
The utilization of MP CPU over 1 min.
It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.7
cpuProcessUtil5Min
The utilization of MP CPU over 5 min.
It shows the percentage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.8
processStatus
Process Status
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.9

mpCpuStatsRevTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.2.7 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mpCpuStatsRevTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::mpCpuStatsRevTable' 
The table of CPU utilization statistics.
mpCpuStatsRevTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1
A row in the CPU utilization stats table.
Indexes
Column Syntax OID
mpCpuSwitchNumberRev
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.1
mpCpuSwitchUUIDRev
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.2
mpCpuStatsUtil1SecondRev
The utilization of MP CPU over 1 second. It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.3
mpCpuStatsUtil5SecondsRev
The utilization of MP CPU over 5 seconds. It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.4
mpCpuStatsUtil1MinuteRev
The utilization of MP CPU over 1 minute. It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.5
mpCpuStatsUtil5MinutesRev
The utilization of MP CPU over 5 minutes. It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.6

cpuUtilProcessStatsRevTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.2.8 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsRevTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::cpuUtilProcessStatsRevTable' 
The table of CPU utilization per process statistics.
cpuUtilProcessStatsRevTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1
A row in the CPU utilization stats per process table.
Indexes
Column Syntax OID
processSwitchNumberRev
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.1
processIdRev
The process ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.2
processSwitchUUIDRev
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.3
processNameRev
Process Name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.4
cpuProcessUtil1SecRev
The utilization of MP CPU over 1 second.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.5
cpuProcessUtil5SecRev
The utilization of MP CPU over 5 seconds.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.6
cpuProcessUtil1MinRev
The utilization of MP CPU over 1 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.7
cpuProcessUtil5MinRev
The utilization of MP CPU over 5 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.8
processStatusRev
Process Status
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.9

portStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.3.1 · 1 row entry · 39 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::portStatsTable' 
The table of port statistics.
portStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1
A row in the port stats table.
Indexes
Column Syntax OID
portStatsIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.1
portStatsPhyIfInOctets
The total number of octets received on the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.2
portStatsPhyIfInUcastPkts
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.3
portStatsPhyIfInNUcastPkts
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.4
portStatsPhyIfInDiscards
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.5
portStatsPhyIfInErrors
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.6
portStatsPhyIfInUnknownProtos
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.7
portStatsPhyIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.8
portStatsPhyIfOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.9
portStatsPhyIfOutNUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.10
portStatsPhyIfOutDiscards
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.11
portStatsPhyIfOutErrors
The number of outbound packets that could not be
transmitted because of errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.12
portStatsPhyIfOutQLen
The length of the output packet queue (in
packets).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.13
portStatsPhyIfInBroadcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.15
portStatsClear
Setting this value to clear(2) clears the stats for this port.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.16
portStatsPhyIfInMulticastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.17
portStatsPhyIfOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.18
portStatsLinkStateChange
Number of link state changes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.20
portStatsPhyIfInFctlPkts
The number of inbound flow control packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.21
portStatsPhyIfOutFctlPkts
The number of outbound flow control packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.22
portStatsPhyIfInFctlPktsRate
The number of inbound flow control packets per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.23
portStatsPhyIfOutFctlPktsRate
The number of outbound flow control packets per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.24
portStatsPhyIfIngDiscdVlan
The number of packets, discarded because of VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.25
portStatsPhyIfIngDiscdEgrMap
The number of packets, discarded because of empty egress portmap.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.26
portStatsPhyIfIngDiscdFilter
The number of packets, discarded because of filter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.27
portStatsPhyIfIngDiscdPolicy
The number of packets, discarded because of policy.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.28
portStatsPhyIfIngDiscdNonFwdStat
The number of packets, discarded because of Non-Forwarding State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.29
portStatsPhyIfIngDiscdIbpCbp
The number of packets discarded because of IBP/CBP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.30
portStatsDot1PortInFrames
The number of IN frames per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.31
portStatsDot1PortOutFrames
The number of OUT frames per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.32
portStatsDot1PortInDiscards
The number of IN packets discarded per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.33
portStatsDot1TpLearnedEntryDiscards
The number of Dot1Tp learned entries discarded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.34
portStatsPhyIfEgrHOLBlockDiscd
The number of packets, discarded because of HOL Blocking.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.36
portStatsPhyIfEgrMMUDiscd
The number of packets, discarded by MMU because of zero port bitmap.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.37
portStatsPhyIfEgrCellErrDiscd
The number of packets, discarded because of Cell Errors or purging.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.38
portStatsPhyIfEgrMMUAgeDiscd
The number of packets, discarded because of MMU Aging. Applicable in
10/100 mode, incremented for frames aborted which were deferred for an
excessive period of time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.39
portStatsPhyIfEgrOtherDiscd
The number of packets, discarded because of Other reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.40
portStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.41

portMgmtStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.3.3 · 1 row entry · 16 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portMgmtStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::portMgmtStatsTable' 
The table of port statistics.
portMgmtStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1
A row in the management port stats table.
Indexes
Column Syntax OID
portMgmtStatsIndx
The management port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.1
portMgmtStatsRxBytes
The total number of bytes received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.2
portMgmtStatsTxBytes
The total number of bytes transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.3
portMgmtStatsRxpackets
Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.4
portMgmtStatsTxpackets
Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.5
portMgmtStatsRxErrors
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.6
portMgmtStatsTxErrors
The number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.7
portMgmtStatsRxDropped
The number of inbound packets that were dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.8
portMgmtStatsTxDropped
The number of outbound packets that were dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.9
portMgmtStatsRxOverruns
The number of data overruns over this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.10
portMgmtStatsTxOverruns
The number of data overruns over this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.11
portMgmtStatsRxFrame
The number of frames received on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.12
portMgmtStatsTxCarrier
The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.13
portMgmtStatsRxMulticast
The total number of multicast packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.14
portMgmtStatsTxCollisions
The number of collisions on this outbound segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.15
portMgmtStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.16

allportsStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.3.4 · 1 row entry · 42 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk allportsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::allportsStatsTable' 
The table of all ports statistics.
allportsStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1
A row in the table of all ports statistics.
Indexes
Column Syntax OID
allportsStatsIndx
The port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.1
allportsStatsDescr
The port description.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.2
allportsStatsSpeed
The current operational speed of the port.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
7mbs40000
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.3
allportsStatsPhysAddress
The port MAC Address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.4
allportsStatsAdminStatus
The port Admin state.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.5
allportsStatsOperStatus
The port Operational Status.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.6
allportsStatsInOctets
Octets In for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.7
allportsStatsOutOctets
Octets Out for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.8
allportsStatsInPkts
Packets In for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.9
allportsStatsOutPkts
Packets Out for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.10
allportsStatsInUcast
Unicast Packets In for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.11
allportsStatsOutUcast
Unicast Packets Out for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.12
allportsStatsInBcast
Broadcasts Packets In for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.13
allportsStatsOutBcast
Broadcasts Packets Out for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.14
allportsStatsInMcast
Multicast Packets In for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.15
allportsStatsOutMcast
Multicast Packets Out for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.16
allportsStatsInDiscards
Discarded Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.17
allportsStatsOutDiscards
Outbound Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.18
allportsStatsInErrors
Error Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.19
allportsStatsOutErrors
Not sent packets due to error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.20
allportsStatsInUnknownProtos
Unknown protocol packets.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.21
allportsStatsOutQLen
Outbound Packet Queue Length.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.22
allportsStatsipInReceives
Ip In Receives.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.23
allportsStatsipInHeaderErrors
Ip In Header Errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.24
allportsStatsipInDiscards
Ip In Discards.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.25
allportsStatsLinkStateChange
Number of link state changes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.26
allportsStatsipInReceivesRate
Ip In Receives rate.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.27
allportsStatsipInHeaderErrorsRate
Ip In Header Errors rate.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.28
allportsStatsipInDiscardsRate
Ip In Discards rate.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.29
allportsStatsInOctetsRate
Octets In rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.30
allportsStatsOutOctetsRate
Octets Out rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.31
allportsStatsInUcastRate
Unicast Packets In rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.32
allportsStatsOutUcastRate
Unicast Packets Out rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.33
allportsStatsInBcastRate
Broadcasts Packets In rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.34
allportsStatsOutBcastRate
Broadcasts Packets Out rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.35
allportsStatsInMcastRate
Multicast Packets In rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.36
allportsStatsOutMcastRate
Multicast Packets Out rate for port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.37
allportsStatsInDiscardsRate
Discarded In Packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.38
allportsStatsOutDiscardsRate
Discarded Out Packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.39
allportsStatsInErrorsRate
Erroneus inbound packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.40
allportsStatsOutErrorsRate
Not sent packets due to error rate.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.41
allportsStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.42

dot1RateStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.3.7 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::dot1RateStatsTable' 
The table of bridging statistics per second.
dot1RateStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1
Bridging statistics per second.
Indexes
Column Syntax OID
dot1RateStatsIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.1
dot1RatePortInFrames
The number of frames that have been received
per second by this port from its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.2
dot1RatePortOutFrames
The number of frames that have been transmitted
per second by this port to its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.3
dot1RatePortInDiscards
Count of valid frames received which were
discarded per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.4
dot1RateTpLearnedEntryDiscards
The number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.5
dot1RatePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.9

dot3RateStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.3.8 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot3RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::dot3RateStatsTable' 
The table of Ethernet statistics per second.
dot3RateStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1
Ethernet statistics per second.
Indexes
Column Syntax OID
dot3RateStatsIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.1
dot3RateStatsAlignmentErrors
A count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.2
dot3RateStatsFCSErrors
A count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.3
dot3RateStatsSingleCollisionFrames
A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.4
dot3RateStatsMultipleCollisionFrames
A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.5
dot3RateStatsSQETestErrors
A count of times that the SQE TEST ERROR message is
generated per second by the PLS sublayer for a
particular interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.6
dot3RateStatsDeferredTransmissions
A count per second of frames for which the first
transmission attempt on a particular interface is
delayed because the medium is busy.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.7
dot3RateStatsLateCollisions
The number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.8
dot3RateStatsExcessiveCollisions
A count per second of frames for which
transmission on a particular interface fails
due to excessive collisions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.9
dot3RateStatsInternalMacTransmitErrors
A count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.10
dot3RateStatsCarrierSenseErrors
The number of times per second that the carrier sense
condition was lost or never asserted when attempting
to transmit a frame on a particular interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.11
dot3RateStatsFrameTooLongs
A count per second of frames received on a particular
interface that exceed the maximum permitted frame size.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.12
dot3RateStatsInternalMacReceiveErrors
A count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.13
dot3RatePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.14

aclStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.11.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclStatsTable' 
The table of ACL statistics.
aclStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1
Statistics about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclStatsIndex
The acl index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.1
aclStatsHits
Total number of hits for this ACL entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.2
aclClearStats
Setting this value to clear(2) clears the stats for the ACL.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.3

vmapStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.11.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapStatsTable' 
The table of VMAP statistics.
vmapStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1
Statistics about a particular VMAP configuration entry.
Indexes
Column Syntax OID
vmapStatsIndex
The vmap index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.1
vmapStatsHits
Total number of hits for this VMAP entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.2
vmapClearStats
Setting this value to clear(2) clears the stats for the VMAP.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.3

acl6StatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.11.3 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::acl6StatsTable' 
The table of IPv6 ACL statistics.
acl6StatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1
Statistics about a particular IPv6 ACL configuration entry.
Indexes
Column Syntax OID
acl6StatsIndex
The ipv6 acl index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.1
acl6StatsHits
Total number of hits for this IPv6 ACL entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.2
acl6ClearStats
Setting this value to clear(2) clears the stats for the IPv6 ACL.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.3

memoryStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.12.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk memoryStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::memoryStatsTable' 
The table of memory statistics
memoryStatsEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1
Statistics about of memory
Indexes
Column Syntax OID
switchNumber
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.1
switchUUID
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.2
totalMemoryStats
The total memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.3
memoryFreeStats
The free memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.4
memorySharedStats
The shared memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.5
memoryBufferStats
The buffer memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.6
swapTotalStats
The total swap memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.7
swapFreeStats
The free swap memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.8
highTotalStats
The total high memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.9
highFreeStats
The free high memory in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.10

tcpControlBlocksTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.21.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::tcpControlBlocksTable' 
All TCP allocated control blocks
tcpControlBlocksTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1
A row in the TCP control blocks table.
Indexes
Column Syntax OID
tcpControlBlocksIndx
The TCP blocks index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.1
destAddr
The TCP block destination address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.2
remotePort
Tcp informations concerning the remote port
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.3
sourceAddr
IP address of the source of the Tcp block
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.4
localPort
Tcp informations concerning the local port
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.5
state
The state of the Tcp
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.6
portType
The type of the local port
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.7
portState
The state of the local port
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.8

tcpMGMTControlBlocksTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.21.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::tcpMGMTControlBlocksTable' 
All TCP allocated control blocks on MGMT port
tcpMGMTTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1
A row in the TCP on MGMT port table.
Indexes
Column Syntax OID
tcpMGMTIndx
Index in the tcpMGMTControlBlocksTable table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.1
recvQ
The size of the received TCP queue.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.2
sentQ
The size of the sent TCP blocks queue.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.3
localAddress
The local address for the TCP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.4
foreignAddress
The remote address for the TCP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.5
stateMgmt
The port's state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.6

udpControlBlocksTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.22.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::udpControlBlocksTable' 
All UDP control blocks in use
udpControlBlocksTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1
A row in the UDP control blocks table.
Indexes
Column Syntax OID
udpMpLocalPort
The current UDP local port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.1
udpMpState
The port's state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.2

udpMGMTControlBlocksTable

table
.1.3.6.1.4.1.20301.2.7.21.1.2.22.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::udpMGMTControlBlocksTable' 
All UDP control blocks allocated  on MGMT port
udpMGMTTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1
A row in the UDP on MGMT port table.
Indexes
Column Syntax OID
udpMGMTIndx
Index in the udpMGMTControlBlocksTable table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.1
recvQUdp
The size of the received UDP queue.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.2
sentQUdp
The size of the sent UDP blocks queue.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.3
localAddressUdp
The local address for the UDP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.4
foreignAddressUdp
The remote address for the UDP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.5
stateMgmtUdp
The port's state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.6

hwInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hwInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hwInfoTable' 
The table with the hardware information for the switches in the fabric.
hwInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1
Hardware related information for a switch in the fabric.
Indexes
Column Syntax OID
hwInfoSwitchNumber
The number of the attached switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.1
hwInfoSwitchUUID
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.2
hwInfoPartNumber
The hardware part number of the Switch.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.3
hwInfoRevision
The hardware revision. If the revision is not
available, a zero length string should be returned.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.4
hwInfoLastBoot
Time and reason of the last boot.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.5
hwInfoMACAddress
The MAC address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.6
hwInfoSerialNumber
The switch serial number.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.7
hwInfoSwitchSoftwareVersion
The switch software version.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.8
hwInfoFlashConfiguration
The active flash configuration.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.9
hwInfoManufacturingDate
The date of manufacturing.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.10
hwInfoPanicDump
There is the panic dump file on the switch. yes -there is file, no - there is no file
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.11
hwInfoFanStatus
The fan status on the system.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.12
hwInfoFanSpeed
The fan speed on the system.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.13
hwInfoTempSensors
The temperature sensors on the system.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.14
hwInfoGlobalHealthStatus
This variable summarizes the statuses of several key elements of the device.
OK:
- All temperature sensors are below the warning threshold (eg. < 85 C);
- All fans are running at >= 100 RPMs;
- Both power suppl…
Enumeration
Enumerated Values:
1ok
2noncritical
3critical
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.15
hwInfoPCBAPartNumber
The PCBA part number.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.16
hwInfoHardwareRevision
The hardware revision. If the revision is not
available, a zero length string should be returned.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.17
hwInfoPLDFirmwareVersion
The PLD Firmware Version.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.18
hwInfoTemperatureWarn
The temperature Warning
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.20
hwInfoTemperatureShut
The temperature Shutdown
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.21
hwInfoTemperatureIn
The temperature Inlet
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.22
hwInfoTemperatureOut
The temperature Exhaust
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.23
hwInfoPowerConsumption
The switch power consumption.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.24
hwInfoESN
The ESN of the switch.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.25
hwInfoMTM
This object specifies the value for MTM.
The available MTM values are:
7159-DFX (1)
7159-DRX (2)
7159-HCM (3)
7159-HCK (4)
7120-64F (5)
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.26

hwPCIUnitTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.1.25 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hwPCIUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hwPCIUnitTable' 
The table with PCI units on board.
hwPCIUnitTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1
A row in the PCI units table.
Indexes
Column Syntax OID
hwPCIUnitId
The Unit identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.1
hwPCIInfo
Unit information
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.2

portInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.2.1 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::portInfoTable' 
The table of port information.
portInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1
A row in the port information table.
Indexes
Column Syntax OID
portInfoIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.1
portInfoSpeed
The current operational speed of the port.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
7mbs40000
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.2
portInfoMode
The current operational mode of the port.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.3
portInfoFlowCtrl
The current operational flow control of the port.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.4
portInfoLink
The current operational link status of the port.
Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
5errdisabled
6detached
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.5
portInfoPhyIfDescr
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.6
portInfoPhyIfType
The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.7
portInfoPhyIfMtu
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.8
portInfoPhyIfPhysAddress
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet stri…
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.9
portInfoPhyIfOperStatus
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.10
portInfoPhyIfLastChange
The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.11
portInfoLearning
The port L2 (FDB) Learning state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.18
portInfoType
The type of the port.
Enumeration
Enumerated Values:
1fabric
2remoteMgmt
3localMgmt
4mgmt
7internal
8external
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.19
portInfoPvid
This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.21
portInfoVlanTag
This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is as…
Enumeration
Enumerated Values:
0untagged
1tagged
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.22
portInfoErrDisableRecovery
This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been…
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.23
portInfoErrDisableTimeLeft
If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatical…
Integer32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.24
portInfoAlias
The alias of the row in portInfo configuration table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.27

agSwFeaturesTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.3.15 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agSwFeaturesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agSwFeaturesTable' 
The table for software key features.
agSwFeaturesEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1
A row in the software key features table.
Indexes
Column Syntax OID
agSwFeaturesSwitchNumber
The number of the software key features switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.1
agSwFeatureKeys
The software keys information on the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.2

agDiffTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agDiffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agDiffTable' 
The table of diff strings.
agDiffTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1
An entry in the diff table.
Indexes
Column Syntax OID
agDiffIndex
The table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.1
agDiffString
A string in the diff table.
OctetString .1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.2

agCfgDumpTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.5.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCfgDumpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agCfgDumpTable' 
The table of dump strings.
agCfgDumpTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1
An entry in the dump table.
Indexes
Column Syntax OID
agCfgDumpIndex
The table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.1
agCfgDumpString
A string in the dump table.
OctetString .1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.2

geaportInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk geaportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::geaportInfoTable' 
The table of gea port mapping.
geaportInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1
An entry in the geaport table mapping.
Indexes
Column Syntax OID
geaportInfoLogicalIndex
The logical port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.1
geaportInfoAlias
The GEA Port Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.2
geaportInfoPort
The GEA Port (0-based).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.3
geaportInfoUnit
The GEA Unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.4

chassisInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.10.1 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk chassisInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::chassisInfoTable' 
The table of chassisInfo
chassisInfoEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1
Information about the chassis
Indexes
Column Syntax OID
embeddedSwitchNumber
The number of the attached embedded switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.1
chassisInfoSwitchModuleBay
Switch Module Bay Number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.2
chassisInfoType
The Type of Chassis
Enumeration
Enumerated Values:
1bladeCenterHT
2bladeCenterST
3bladeCenterT
4bladeCenterH
5bladeCenterS
6flexEnterprise
7harrier
8pelican
9bladeCenterE
10flexCarrier
11tracewell4
12tracewell8
13tracewell7
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.3
chassisInfoPOSTResults
POST Results.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.4
mmcDefaultConfiguration
Management Module Control's Default Configuration
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.5
mmcSkipExtendedMemoryTest
Management Module Control Skip Extended Memory Test.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.6
mmcDisableNonCMMPorts
Management Module Control Disable Non-CMM Ports.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.7
mmcPOSTDiagnosticsControl
Management Module Control POST Diagnostics Control.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.8
mmcControlRegister
Management Module Control Control Register.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.9
mmcExtendedControlRegister
Management Module Control Extended Control Register.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.10
mmspDevicePowerUpComplete
Management Module Status Reporting Device PowerUp Complete.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.11
mmspOverCurrentFault
Management Module Status Reporting Over Current Fault.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.12
mmspFaultLED
Management Module Status Reporting Fault LED.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.13
mmspPrimaryTemperatureWarning
Management Module Status Reporting Primary Temperature Warning.
Enumeration
Enumerated Values:
1exceeded
2ok
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.14
mmspSecondaryTemperatureWarning
Management Module Status Reporting Secondary Temperature Warning.
Enumeration
Enumerated Values:
1exceeded
2ok
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.15
mmspStatusRegister
Management Module Status Reporting Status Register.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.16
mmspExtendedStatus
Management Module Status Reporting Extended Status.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.17
chassisInfoUUID
Chassis UUID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.18

sfpInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.11.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::sfpInfoTable' 
The table of external port SFP information.
sfpInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1
A row in the external port SFP information table.
Indexes
Column Syntax OID
sfpInfoIndx
The external port SFX index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.1
sfpInfoPortAlias
External Port SFP/XFP alias.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.2
sfpInfoDevice
External Port SFP/XFP Device.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.3
sfpInfoTXEnable
External Port SFP/XFP TX-Enable.
Enumeration
Enumerated Values:
1notInstalled
2enabled
3disabled
4detached
5notAvailable
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.4
sfpInfoRXSignal
External Port SFP/XFP RX-Signal.
Enumeration
Enumerated Values:
1notInstalled
2down
3link
4notAvailable
5detached
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.5
sfpInfoTXFault
External Port SFP/XFP TX-Fault.
Enumeration
Enumerated Values:
1notInstalled
2fault
3none
4notAvailable
5detached
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.6
sfpInfoApproved
External Port SFP/XFP Approval.
Enumeration
Enumerated Values:
1notInstalled
2notApproved
3sfpApproved
4detached
5sfpAccepted
6sfpRestrict
7sfpUnsupprt
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.7
sfpInfoVendor
External Port SFP/XFP device vendor.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.8
sfpInfoSerial
External Port SFP/XFP device serial.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.9
sfpInfoPartNumber
External Port SFP/XFP device part number.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.10
sfpInfoRevision
External Port SFP/XFP device revision.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.11
sfpInfoVoltage
External Port SFP/XFP device voltage.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.12
sfpInfoTemperature
External Port SFP/XFP device temperature.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.13
sfpInfoWaveLength
External Port SFP/XFP device laser wave length.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.14

vmGroupInfoTbl

table
.1.3.6.1.4.1.20301.2.7.21.1.3.12.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmGroupInfoTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmGroupInfoTbl' 
Virtual MAC information table
vmGroupInfolistEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1
The run-time information about a virtual machine
Indexes
Column Syntax OID
vmGroupInfoIdx
Table index, 1 based.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.1
vmGroupInfoMac
The virtual machine MAC address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.2
vmGroupInfoIP
The virtual machine IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.3
vmGroupInfoPortIdx
System port connected to the virtual machine.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.4
vmGroupInfoGroup
The virtual machine group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.5
vmGroupInfoVlan
The virtual machine VLAN
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.6
vmGroupInfoIsESXSvcCon
Set to 1 if ESX Service Console Interface, else 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.7
vmGroupInfoIsVMK
Set to 1 if VM Kernel Interface, else 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.8
vmGroupInfoName
Virtual Machine Name, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.9
vmGroupInfoUUID
Virtual Machine UUID, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.10
vmGroupInfoVSwitch
Virtual Machine VSwitch, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.11
vmGroupInfoPortGroup
Virtual Machine Port Group, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.12
vmGroupInfoHost
Virtual Machine Host, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.13
vmGroupInfoPortAlias
System port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.14

accessUserInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.1.3.13.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk accessUserInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::accessUserInfoTable' 
The table of user information.
accessUserInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1
An entry in the user information table.
Indexes
Column Syntax OID
accessUserInfoIndex
The table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.1
accessUserInfoLockState
Lock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator.
Enumeration
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.2
accessUserInfoClearFailAttempts
Action Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.3
accessUserInfoClearLock
Action Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.4

agPortOperTable

table
.1.3.6.1.4.1.20301.2.7.21.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::agPortOperTable' 
The table of port operations.
agPortOperTableEntry row .1.3.6.1.4.1.20301.2.7.21.1.4.1.1
A row in the port operations table.
Indexes
Column Syntax OID
portOperIdx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.1.4.1.1.1
portOperState
Enable/Disable port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.4.1.1.2
portOperRmon
Enable/Disable RMON for port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.4.1.1.3
portOperLearning
Enable/Disable L2 (FDB) Learning for this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.1.4.1.1.4
portOperAlias
The port alias..
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.1.4.1.1.5

vlanCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vlanCurCfgTable' 
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanCurCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.1
vlanCurCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.2
vlanCurCfgState
Enable or disable a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.3
vlanCurCfgVlanName
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.9
vlanCurCfgPrVlanType
The type of the Private VLAN.
Enumeration
Enumerated Values:
0none
1primary
2isolated
3community
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.10
vlanCurCfgPrVlanMapPriId
The primary vlan id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.11
vlanCurCfgVports
Current list of vPorts in VLAN
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.22

vlanNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.1.3 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vlanNewCfgTable' 
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanNewCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.1
vlanNewCfgVlanName
The VLAN name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.2
vlanNewCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.3
vlanNewCfgState
Enable or disable a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.4
vlanNewCfgAddPortIndex
The port to be added to the specified VLAN. A '0' value is
returned when read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.5
vlanNewCfgRemovePortIndex
The port to be removed from the specified VLAN. A '0'
value is returned when read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.6
vlanNewCfgDelete
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.7
vlanNewCfgPrVlanType
The type of the Private VLAN.
Enumerationr/w
Enumerated Values:
0none
1primary
2isolated
3community
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.13
vlanNewCfgPrVlanMapPriId
The primary vlan id. To delete set 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.14
vlanNewCfgVports
List of vPorts in VLAN
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.25
vlanNewCfgAddVport
Add vPort in VLAN
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.26
vlanNewCfgRemoveVport
Remove vPort from VLAN
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.27
vlanNewCfgAddPortAlias
The port alias to be added to the specified VLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.28
vlanNewCfgRemovePortAlias
The port alias to be removed from the specified VLAN. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.29

trunkGroupCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkGroupCurCfgTable' 
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupCurCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.1
trunkGroupCurCfgPorts
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.2
trunkGroupCurCfgState
Enable or disable a trunk group.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.3

trunkGroupNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkGroupNewCfgTable' 
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupNewCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.1
trunkGroupNewCfgPorts
The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.2
trunkGroupNewCfgAddPortIndex
The port to be added in the trunk group. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.3
trunkGroupNewCfgRemovePortIndex
The port to be deleted from the trunk group. when read, 0
is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.4
trunkGroupNewCfgState
Enable or disable a trunk group.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.5
trunkGroupNewCfgDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.6
trunkGroupNewCfgAddPortAlias
The port alias to be added in the trunk group. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.7
trunkGroupNewCfgRemovePortAlias
The port alias to be deleted from the trunk group. when read, 0
is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.8

trunkLacpGroupCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.2.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkLacpGroupCurCfgTable' 
The table of LACP trunk group configuration.
trunkLacpGroupCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1
A row in the LACP trunk group configuration table.
Indexes
Column Syntax OID
trunkLacpGroupCurCfgIndex
The identifier of the LACP trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.1
trunkLacpGroupCurCfgAdminKey
The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.2

trunkLacpGroupNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.2.6 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkLacpGroupNewCfgTable' 
The table of LACP trunk group configuration.
trunkLacpGroupNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1
A row in the LACP trunk group configuration table.
Indexes
Column Syntax OID
trunkLacpGroupNewCfgIndex
The identifier of the LACP trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.1
trunkLacpGroupNewCfgAdminKey
The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
Value 0 means LACP trunk group deletion.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.2

pmCurCfgPortMonitorTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::pmCurCfgPortMonitorTable' 
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmCurCfgPmirrMoniPortIndex
The monitoring port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndex
The mirrored port number
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.2
pmCurCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.3
pmCurCfgPmirrMoniPortAlias
The monitoring port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.7
pmCurCfgPmirrMirrPortAlias
The mirrored port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.8

pmNewCfgPortMonitorTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::pmNewCfgPortMonitorTable' 
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmNewCfgPmirrMoniPortIndex
The monitoring port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndex
The mirrored port number
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.2
pmNewCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.3
pmNewCfgPmirrDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.4
pmNewCfgPmonDelete
Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.10
pmNewCfgPmirrMoniPortAlias
The monitoring port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.11
pmNewCfgPmirrMirrPortAlias
The mirrored port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.12

lacpCurPortCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.5.7 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpCurPortCfgTable' 
The table of LACP port configuration.
lacpCurPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1
A row in the LACP port configuration table.
Indexes
Column Syntax OID
lacpCurPortCfgTableId
LACP port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.1
lacpCurPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumeration
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.2
lacpCurPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-only.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.3
lacpCurPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.4
lacpCurPortActorMinLinks
The current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.5
lacpCurPortSuspendIndividual
It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumeration
Enumerated Values:
1suspend
2individual
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.6
lacpCurPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.7

lacpNewPortCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.5.8 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpNewPortCfgTable' 
The table of LACP port configuration.
lacpNewPortCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1
A row in the LACP port configuration table.
Indexes
Column Syntax OID
lacpNewPortCfgTableId
LACP port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.1
lacpNewPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumerationr/w
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.2
lacpNewPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.3
lacpNewPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.4
lacpNewPortActorMinLinks
The current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.5
lacpNewPortSetToDefault
When read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values.
Enumerationr/w
Enumerated Values:
1none
2setDefault
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.6
lacpNewPortSuspendIndividual
It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumerationr/w
Enumerated Values:
1suspend
2individual
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.7
lacpNewPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.8

failoverCurCfgTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.10.6 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverCurCfgTriggerTable' 
The Failover Trigger Table.
failoverCurCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1
A row in the Failover Trigger Table.
Indexes
Column Syntax OID
failoverCurCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.1
failoverCurCfgTriggerState
Enable or disable Trigger state
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.2
failoverCurCfgTriggerLimit
Limit # of operational links
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.3
failoverCurCfgTriggerMmonPort
The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.6
failoverCurCfgTriggerMmonTrunk
The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.7
failoverCurCfgTriggerMmonKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.8
failoverCurCfgTriggerMconPort
The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.9
failoverCurCfgTriggerMconVport
The Manual Control vPort list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.10
failoverCurCfgTriggerMconTrunk
The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.11
failoverCurCfgTriggerMconKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.12
failoverCurCfgFabricPathMonitor
Enable or disable Failover Fabric Path monitoring
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.13

failoverNewCfgTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.10.7 · 1 row entry · 30 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverNewCfgTriggerTable' 
The Failover Trigger Table.
failoverNewCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1
A row in the Failover Trigger Table.
Indexes
Column Syntax OID
failoverNewCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.1
failoverNewCfgTriggerState
Enable or disable Trigger state
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.2
failoverNewCfgTriggerLimit
Limit # of operational links
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.3
failoverNewCfgTriggerMmonPort
The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.10
failoverNewCfgTriggerMmonPortIndexAdd
Add port to Manual Monitor. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.11
failoverNewCfgTriggerMmonPortIndexRem
Remove port from Manual Monitor. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.12
failoverNewCfgTriggerMmonTrunk
The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.13
failoverNewCfgTriggerMmonTrunkAdd
Add trunk to Manual Monitor. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.14
failoverNewCfgTriggerMmonTrunkRem
Remove trunk from Manual Monitor. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.15
failoverNewCfgTriggerMmonKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.16
failoverNewCfgTriggerMmonKeyAdd
Add LACP admin key to Manual Monitor. When read, 0 is returned.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.17
failoverNewCfgTriggerMmonKeyRem
Remove LACP admin key from Manual Monitor. When read, 0 is returned.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.18
failoverNewCfgTriggerMconPort
The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.19
failoverNewCfgTriggerMconPortIndexAdd
Add port to Manual Control. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.20
failoverNewCfgTriggerMconPortIndexRem
Remove port from Manual Control. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.21
failoverNewCfgTriggerMconVport
The Manual Control vPort list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.22
failoverNewCfgTriggerMconVportAdd
Add vPort to Manual Control.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.23
failoverNewCfgTriggerMconVportRem
Remove vPort from Manual Control.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.24
failoverNewCfgTriggerMconTrunk
The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.25
failoverNewCfgTriggerMconTrunkAdd
Add trunk to Manual Control. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.26
failoverNewCfgTriggerMconTrunkRem
Remove trunk from Manual Control. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.27
failoverNewCfgTriggerMconKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.28
failoverNewCfgTriggerMconKeyAdd
Add LACP admin key to Manual Control. When read, 0 is returned.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.29
failoverNewCfgTriggerMconKeyRem
Remove LACP admin key from Manual Control. When read, 0 is returned.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.30
failoverNewCfgTriggerDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.31
failoverNewCfgFabricPathMonitor
Enable or disable Failover Fabric Path monitoring
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.32
failoverNewCfgTriggerMmonPortAliasAdd
Add port to Manual Monitor using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.33
failoverNewCfgTriggerMmonPortAliasRem
Remove port from Manual Monitor using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.34
failoverNewCfgTriggerMconPortAliasAdd
Add port to Manual Control using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.35
failoverNewCfgTriggerMconPortAliasRem
Remove port from Manual Control using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.36

hotlinksCurCfgTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.14.6 · 1 row entry · 16 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hotlinksCurCfgTriggerTable' 
The Hot Links Trigger Table.
hotlinksCurCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1
A row in the Hot Links Trigger Table.
Indexes
Column Syntax OID
hotlinksCurCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.1
hotlinksCurCfgTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.2
hotlinksCurCfgTriggerState
Enable/disable Trigger state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.3
hotlinksCurCfgTriggerPreemptState
Enable/disable Preemption state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.4
hotlinksCurCfgTriggerFdelay
Forward Delay setting (in secs).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.5
hotlinksCurCfgTriggerMasterPortIndex
The master interface port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.6
hotlinksCurCfgTriggerMasterTrunk
The master interface trunk number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.7
hotlinksCurCfgTriggerBackupPortIndex
The backup interface port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.8
hotlinksCurCfgTriggerBackupTrunk
The backup interface trunk number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.9
hotlinksCurCfgTriggerDelete
Delete a Hot Links trigger configuration.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.10
hotlinksCurCfgTriggerMasterAdminkey
The master interface admin key number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.11
hotlinksCurCfgTriggerBackupAdminkey
The backup interface admin key number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.12
hotlinksCurCfgTriggerMode
The current mode of the Hot Links trigger entry:
portMode - either the master or the backup interface will be active
and forwarding traffic while the other interface will be
standby and not forward…
Enumeration
Enumerated Values:
1portMode
2autoVlanMode
3preferVlanMode
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.13
hotlinksCurCfgTriggerBackupPreferVLANs
Trigger backup preferred VLANs. The value of this object identifies
one or more VLANs whose traffic will be carried by the backup
interface when the associated hotlinksCurCfgTriggerMode object value
is preferVlanMode.…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.14
hotlinksCurCfgTriggerMasterPortAlias
The master interface port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.17
hotlinksCurCfgTriggerBackupPortAlias
The backup interface port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.18

hotlinksNewCfgTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.14.7 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hotlinksNewCfgTriggerTable' 
The Hot Links Trigger Table.
hotlinksNewCfgTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1
A row in the Hot Links Trigger Table.
Indexes
Column Syntax OID
hotlinksNewCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.1
hotlinksNewCfgTriggerName
A textual string containing the trigger name.
OctetStringr/w
Constraints:
range: 0-33
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.2
hotlinksNewCfgTriggerState
Enable/disable Trigger state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.3
hotlinksNewCfgTriggerPreemptState
Enable/disable Preemption state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.4
hotlinksNewCfgTriggerFdelay
Forward Delay setting (in secs).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.5
hotlinksNewCfgTriggerMasterPortIndex
The master interface port number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.6
hotlinksNewCfgTriggerMasterTrunk
The master interface trunk number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.7
hotlinksNewCfgTriggerBackupPortIndex
The backup interface port number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.8
hotlinksNewCfgTriggerBackupTrunk
The backup interface trunk number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.9
hotlinksNewCfgTriggerDelete
Delete a Hot Links trigger configuration.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.10
hotlinksNewCfgTriggerMasterAdminkey
The master interface admin key number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.11
hotlinksNewCfgTriggerBackupAdminkey
The backup interface admin key number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.12
hotlinksNewCfgTriggerMode
The new mode of the Hot Links trigger entry:
portMode - either the master or the backup interface will be active
and forwarding traffic while the other interface will be
standby and not forwarding …
Enumerationr/w
Enumerated Values:
1portMode
2autoVlanMode
3preferVlanMode
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.13
hotlinksNewCfgTriggerBackupPreferVLANs
Trigger backup preferred VLANs. The value of this object identifies
one or more VLANs whose traffic will be carried by the backup
interface when the associated hotlinksNewCfgTriggerMode object value
is preferVlanMode.…
OctetStringr/w .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.14
hotlinksNewCfgTriggerBackupAddPreferVlan
Add a VLAN as the backup interface's preferred VLAN.
If read, it will always return value 0.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.15
hotlinksNewCfgTriggerBackupRemovePreferVlan
Remove a VLAN from the backup interface's preferred VLANs.
If read, it will always return value 0.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.16
hotlinksNewCfgTriggerMasterPortAlias
The master interface port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.17
hotlinksNewCfgTriggerBackupPortAlias
The backup interface port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.18

lldpCurCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.15.2 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpCurCfgPortTable' 
The table of LLDP port configuration in the current_configuration
block.
lldpCurCfgPortEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1
A row in the LLDP port configuration table in the
current_configuration block.
Indexes
Column Syntax OID
lldpCurCfgPortIndx
The index of the row in LLDP port configurations table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.1
lldpCurCfgPortAdmStat
This is the admin status of the LLDP port.
Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.2
lldpCurCfgPortSnmpTrap
This is the SNMP trap notification state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.3
lldpCurCfgPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.4
lldpCurCfgPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.5
lldpCurCfgPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.6
lldpCurCfgPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.7
lldpCurCfgPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.8
lldpCurCfgPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.9
lldpCurCfgPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.10
lldpCurCfgPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.11
lldpCurCfgPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.12
lldpCurCfgPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.13
lldpCurCfgPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.14
lldpCurCfgPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.15
lldpCurCfgPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.16
lldpCurCfgPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.17
lldpCurCfgPortAlias
The alias of the row in LLDP port configurations table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.20

lldpNewCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.2.1.15.3 · 1 row entry · 19 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpNewCfgPortTable' 
The table of LLDP port configuration in the new_configuration
block.
lldpNewCfgPortEntry row .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1
A row in the LLDP port configuration table in the
new_configuration block.
Indexes
Column Syntax OID
lldpNewCfgPortIndx
The index of the row in LLDP port configurations table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.1
lldpNewCfgPortAdmStat
This is the admin status of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.2
lldpNewCfgPortSnmpTrap
This is the SNMP trap notification state of the LLDP port
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.3
lldpNewCfgPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.4
lldpNewCfgPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.5
lldpNewCfgPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.6
lldpNewCfgPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.7
lldpNewCfgPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.8
lldpNewCfgPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.9
lldpNewCfgPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.10
lldpNewCfgPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.11
lldpNewCfgPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.12
lldpNewCfgPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.13
lldpNewCfgPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.14
lldpNewCfgPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.15
lldpNewCfgPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.16
lldpNewCfgPortalltlv
Set the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3other
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.17
lldpNewCfgPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.18
lldpNewCfgPortAlias
The port of the row in LLDP port configurations table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.20

lacpStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.2.2.4.1 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpStatsTable' 
The table of LACP Stats.
lacpStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1
Lacp status info.
Indexes
Column Syntax OID
lacpStatsIndex
Index
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.1
lacpdusRx
Valid LACPDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.2
markerpdusRx
Valid Marker PDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.3
markerresponsepdusRx
Valid Marker Rsp PDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.4
unknownRx
Unknown version/TLV type
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.5
illegalRx
Illegal subtype received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.6
lacpdusTx
LACPDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.7
markerpdusTx
Market PDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.8
markerresponsepdusTx
Marker Rsp PDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.9
lacpClearStats
Setting this to clear(2) results in clearing the LACP statistics.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.10
lacpStatsPortAlias
Port Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.11

hotlinksStatsTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.2.6.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksStatsTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hotlinksStatsTriggerTable' 
The Hot Links Trigger Table Stats.
hotlinksStatsTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1
A row in the Hot Links Trigger Table Stats.
Indexes
Column Syntax OID
hotlinksStatsTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.1
hotlinksStatsTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.2
hotlinksStatsTriggerMasterActive
The number of times the master interface was set to active.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.3
hotlinksStatsTriggerBackupActive
The number of times the backup interface was set to active.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.4
hotlinksStatsTriggerFdbUpdate
The number of times an FDB update was performed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.5
hotlinksStatsTriggerFdbFailed
The number of times an FDB update failed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.6

lldpStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.2.2.7.2 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpStatsTable' 
The table of LLDP statistics.
lldpStatsTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1
LLDP statistics info.
Indexes
Column Syntax OID
lldpStatsIndex
The index of the row in LLDP port statistics.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.1
lldpStatsFramesOutTotal
The total number of LLDP frames transmitted in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.2
lldpStatsFramesInTotal
The total number of LLDP frames received in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.3
lldpStatsFramesInErrorsTotal
The total number of erroneous LLDP frames received in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.4
lldpStatsFramesDiscardedTotal
The total number of received LLDP frames discarded in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.5
lldpStatsTLVsUnrecognizedTotal
The total number of unrecognized TLVs in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.6
lldpStatsAgeoutsTotal
The total number of neighbor's information deleted in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.7
lldpStatsClear
Setting this to clear(2) results in clearing the LLDP statistics.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.8
lldpStatsPortAlias
The alias of the row in LLDP port statistics.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.9

slpStatsTxCountersTable

table
.1.3.6.1.4.1.20301.2.7.21.2.2.12.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsTxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::slpStatsTxCountersTable' 
A table with all the SLP Send counters.
slpStatsTxCounterEntry row .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1
The configuration objects for a SLP Send counter entry.
Indexes
Column Syntax OID
slpTxCounterIndex
The index of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.1
slpTxCounterName
The name of this counter.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.2
slpTxCounterUnicast
The unicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.3
slpTxCounterMulticast
The multicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.4

slpStatsRxCountersTable

table
.1.3.6.1.4.1.20301.2.7.21.2.2.12.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsRxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::slpStatsRxCountersTable' 
A table with all the SLP Receive counters.
slpStatsRxCounterEntry row .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1
The configuration objects for a SLP Receive counter entry.
Indexes
Column Syntax OID
slpRxCounterIndex
The index this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.1
slpRxCounterName
The name of this counter.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.2
slpRxCounterUnicast
The unicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.3
slpRxCounterMulticast
The multicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.4

fdbTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fdbTable' 
The table of FDB entries.
fdbEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1
A row in the FDB table
Indexes
Column Syntax OID
fdbMacAddr
The MAC address for the FDB entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.1
fdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.2
fdbSrcPortIndex
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.3
fdbState
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2forward
3trunk
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.4
fdbSrcTrunk
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.7
fdbStatus
'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.8
fdbSrcPortAlias
Either the value '0', or the port alias of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been le…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.9

lacpInfoAggrTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.3.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpInfoAggrTable' 
The table of LACP aggregator information.
lacpInfoAggrTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1
Information about a LACP aggregator.
Indexes
Column Syntax OID
lacpInfoAggrIndex
The aggregator identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.1
lacpInfoAggrId
LACP aggregator ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.2
lacpInfoAggrMac
LACP aggregator MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.3
lacpInfoAggrActSysPrio
LACP aggregator actor system priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.4
lacpInfoAggrActSysId
LACP aggregator actor system ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.5
lacpInfoAggrIndivState
LACP aggregator individual state
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.6
lacpInfoAggrActAdminKey
LACP aggregator actor admin key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.7
lacpInfoAggrActOperKey
LACP aggregator actor oper key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.8
lacpInfoAggrPartSysPrio
LACP aggregator partner system priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.9
lacpInfoAggrPartSysId
LACP aggregator partner system ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.10
lacpInfoAggrPartOperKey
LACP aggregator partner oper key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.11
lacpInfoAggrReadyState
LACP aggregator ready state
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.12
lacpInfoAggrNumPorts
Number of ports in aggregator
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.13
lacpInfoAggrMinLinks
Min Links of ports in aggregator
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.15

lacpInfoPortGeneralTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpInfoPortGeneralTable' 
The table of LACP port general information.
lacpInfoPortGeneralTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1
General information about a LACP port.
Indexes
Column Syntax OID
lacpInfoPortGeneralIndex
The port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.1
lacpInfoPortLacpEna
LACP enabled on port
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.2
lacpInfoPortAdminEna
LACP port admin enabled
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.3
lacpInfoPortActSysId
LACP port actor system ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.4
lacpInfoPortActSysPrio
LACP port actor system priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.5
lacpInfoPortActAdminKey
LACP port actor admin key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.6
lacpInfoPortActOperKey
LACP port actor oper key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.7
lacpInfoPortActPortNum
LACP port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.8
lacpInfoPortActPortPrio
LACP port priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.9
lacpInfoPortIndivState
LACP port individual state
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.10
lacpInfoSelAggrId
LACP port selected aggregator ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.11
lacpInfoAttAggrId
LACP port attached aggregator ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.12
lacpInfoPortReadyN
True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.13
lacpInfoPortNtt
Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.14
lacpInfoPortSelected
Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…
Enumeration
Enumerated Values:
1selected
2unselected
3standby
4suspended
5individual
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.15
lacpInfoPortMoved
Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.16
lacpInfoCollDetState
LACP port collision and detection state
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.17
lacpInfoPortRxState
LACP port RX machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.18
lacpInfoPortMuxState
LACP port Mux machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.19
lacpInfoPortPerState
LACP port periodic machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.20
lacpInfoPortPerTraTimer
Periodic Transmit Timer
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.21
lacpInfoPortCurWhileTimer
Current While Timer
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.22
lacpInfoPortOperState
The current operational state of LACP on the port.
Enumeration
Enumerated Values:
1disabled
2up
3down
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.23
lacpInfoPortGeneralPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.24
lacpInfoPortActPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.25

lacpInfoPortAdminTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpInfoPortAdminTable' 
The table of LACP port admin information.
lacpInfoPortAdminTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1
Admin information about a LACP port.
Indexes
Column Syntax OID
lacpInfoPortAdminIndex
The port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.1
lacpInfoPortActAdPortState
The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.7
lacpInfoPortActAdActiv
The state of Actor Administrator Port Activity
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.8
lacpInfoPortActAdSync
The state of Actor Administrator Port Synchronization
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.9
lacpInfoPortActAdDef
The state of Actor Administrator Port Defaulted
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.10
lacpInfoPortActAdTimeout
The state of Actor Administrator Port Timeout
Enumeration
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.11
lacpInfoPortActAdColl
The state of Actor Administrator Port Collecting
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.12
lacpInfoPortActAdExp
The state of Actor Administrator Port Expired
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.13
lacpInfoPortActAdAggr
The state of Actor Administrator Port Aggregation
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.14
lacpInfoPortActAdDist
The state of Actor Administrator Port Distributing
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.15
lacpInfoPortAdminPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.25

lacpInfoPortOperTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lacpInfoPortOperTable' 
The table of LACP port oper information.
lacpInfoPortOperTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1
Oper information about a LACP port.
Indexes
Column Syntax OID
lacpInfoPortOperIndex
The port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.1
lacpInfoPortPartOpSysPrio
The value of Partner Operator Port System Priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.2
lacpInfoPortPartOpSysId
The value of Partner Operator Port System ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.3
lacpInfoPortPartOpKey
The value of Partner Operator Port Key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.4
lacpInfoPortPartOpPortNum
The Partner Operator Port Number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.5
lacpInfoPortPartOpPortPrio
The value of Partner Operator Port Priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.6
lacpInfoPortActOpPortState
The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is s…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.7
lacpInfoPortActOpActiv
The state of Actor Operator Port Activity
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.8
lacpInfoPortActOpSync
The state of Actor Operator Port Synchronization
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.9
lacpInfoPortActOpDef
The state of Actor Operator Port Defaulted
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.10
lacpInfoPortActOpTimeout
The state of Actor Operator Port Timeout
Enumeration
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.11
lacpInfoPortActOpColl
The state of Actor Operator Port Collecting
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.12
lacpInfoPortActOpExp
The state of Actor Operator Port Expired
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.13
lacpInfoPortActOpAggr
The state of Actor Operator Port Aggregation
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.14
lacpInfoPortActOpDist
The state of Actor Operator Port Distributing
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.15
lacpInfoPortPartOpPortState
The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.16
lacpInfoPortPartOpActiv
The state of Partner Operator Port Activity
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.17
lacpInfoPortPartOpSync
The state of Partner Operator Port Synchronization
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.18
lacpInfoPortPartOpDef
The state of Partner Operator Port Defaulted
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.19
lacpInfoPortPartOpTimeout
The state of Partner Operator Port Timeout
Enumeration
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.20
lacpInfoPortPartOpColl
The state of Partner Operator Port Collecting
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.21
lacpInfoPortPartOpExp
The state of Partner Operator Port Expired
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.22
lacpInfoPortPartOpAggr
The state of Partner Operator Port Aggregation
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.23
lacpInfoPortPartOpDist
The state of Partner Operator Port Distributing
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.24
lacpInfoPortOperPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.25

vlanInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vlanInfoTable' 
The table of VLAN information.
vlanInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1
Information about a particular VLAN.
Indexes
Column Syntax OID
vlanInfoId
The VLAN identifier.
Integer32
Constraints:
range: 1-4090
 .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.1
vlanInfoName
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.2
vlanInfoStatus
Enable or disable, VLAN state information
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.3
vlanInfoPorts
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.7

trunkGroupInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkGroupInfoTable' 
The table of trunk group information.
trunkGroupInfoTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1
A row in trunk group information table.
Indexes
Column Syntax OID
trunkGroupInfoIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.1
trunkGroupInfoState
Trunk group state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.2
trunkGroupInfoPorts
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.3
trunkGroupInfoProtocol
Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group
Enumeration
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.4

trunkGroupInfoPortTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.9.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::trunkGroupInfoPortTable' 
The table of Trunk Group Info.
trunkGroupInfoPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1
A row in the Trunk Info table.
Indexes
Column Syntax OID
trunkGroupInfoPortTrunkId
The Trunk identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.1
trunkGroupInfoPortPortId
The Port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.2
trunkGroupInfoPortStatus
The Port Status.
Enumeration
Enumerated Values:
0down
2up
3detached
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.3
trunkGroupInfoPortAlias
The Port alaias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.4

hotlinksInfoTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.10.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hotlinksInfoTriggerTable' 
The Hot Links Trigger Table Info.
hotlinksInfoTriggerTableEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1
A row in the Hot Links Trigger Table Info.
Indexes
Column Syntax OID
hotlinksInfoTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.1
hotlinksInfoTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.2
hotlinksInfoTriggerState
Enable/disable Trigger state info.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.3
hotlinksInfoTriggerPreemptState
Enable/disable Preemption state info.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.4
hotlinksInfoTriggerFdelay
Forward Delay setting info (in secs).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.5
hotlinksInfoTriggerActive
A textual string containing the active interface info.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.6
hotlinksInfoTriggerMasterActiveVlans
The active VLANs on the master interface.

in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.7
hotlinksInfoTriggerBackupActiveVlans
The active VLANs on the backup interface.

in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|…
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.8

lldpInfoPortTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.11.1 · 1 row entry · 21 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpInfoPortTable' 
The table of LLDP Port Info.
lldpInfoPortEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1
LLDP Port Info.
Indexes
Column Syntax OID
lldpInfoPortIndex
The index of the row in LLDP info port table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.1
lldpInfoPortAlias
The port alias of the port in LLDP info port table.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.2
lldpInfoPortMacAddress
The mac address of the port in LLDP info port table.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.3
lldpInfoPortMtu
The MTU size of the port in LLDP info port table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.4
lldpInfoPortEnabled
The PortEnabled field of the port in LLDP info port table.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.5
lldpInfoPortAdminStatus
The Admin Status of the port in LLDP info port table.
Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.6
lldpInfoPortRxChanges
The rxChanges field of the port in LLDP info port table.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.7
lldpInfoPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.8
lldpInfoPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.9
lldpInfoPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.10
lldpInfoPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.11
lldpInfoPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.12
lldpInfoPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.13
lldpInfoPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.14
lldpInfoPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.15
lldpInfoPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.16
lldpInfoPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.17
lldpInfoPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.18
lldpInfoPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.19
lldpInfoPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.20
lldpInfoPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.21

lldpInfoTxTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.11.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoTxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpInfoTxTable' 
The table of LLDP Transmit State Machine Info.
lldpInfoTxEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1
LLDP Transmit State Machine Info.
Indexes
Column Syntax OID
lldpInfoTxIndex
The index of the row in LLDP Transmit State Machine info table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.1
lldpInfoTxState
The transmit state of the port in LLDP Transmit State Machine.
Enumeration
Enumerated Values:
1txLldpInitialize
2txIdle
3txShutdownFrame
4txInfoFrame
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.2
lldpInfoTxLocalChanged
The somethingChangedLocal field of the port in LLDP Transmit
State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.3
lldpInfoTxTTL
The txTTL timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.4
lldpInfoTxTxTTR
The txTTR timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.5
lldpInfoTxDelayWhile
The txDelayWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.6
lldpInfoTxShutdownWhile
The txShutdownWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.7
lldpInfoTxReinitDelay
The reinitDelay timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.8
lldpInfoTxHoldMultiplier
The msgTxHold timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.9
lldpInfoTxTransmitInterval
The msgTxInterval timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.10
lldpInfoTxTransmitDelay
The txDelay timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.11
lldpInfoTxDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.12
lldpInfoTxPortAlias
The alias of the row in LLDP Transmit State Machine info table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.13

lldpInfoRxTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.11.3 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpInfoRxTable' 
The table of LLDP Receive State Machine Info.
lldpInfoRxEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1
LLDP Receive State Machine Info.
Indexes
Column Syntax OID
lldpInfoRxIndex
The index of the row in LLDP Receive State Machine info table.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.1
lldpInfoRxState
The receive state of the port in LLDP Receive State Machine.
Enumeration
Enumerated Values:
1lldpWaitPortOperational
2deleteAgedInfo
3rxLldpInitialize
4rxWaitForFrame
5rxFrame
6deleteInfo
7updateInfo
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.2
lldpInfoRxBadFrame
The badFrame field of the port in LLDP Receive State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.3
lldpInfoRxRcvFrame
The rcvFrame field of the port in LLDP Receive State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.4
lldpInfoRxRxInfoAge
The rxInfoAge field of the port in LLDP Receive State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.5
lldpInfoRxRemoteChanged
The somethingChangedRemote field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.6
lldpInfoRxTooManyNeighbors
The tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.7
lldpInfoRxSNMPNotify
The tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.8
lldpInfoRxRxTTL
The rxTTL timer of the port in LLDP Receive State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.9
lldpInfoRxTooManyNeighborTimer
The tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.10
lldpInfoRxDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.11
lldpInfoRxPortAlias
The alias of the row in LLDP Receive State Machine info table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.12

lldpInfoRemoteDevicesTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.11.4 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpInfoRemoteDevicesTable' 
The table of LLDP remote devices Info.
lldpInfoRemoteDevicesEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1
LLDP remote devices Info.
Indexes
Column Syntax OID
lldpInfoRemoteDevicesIndex
The index of the row in LLDP remote devices info table.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.1
lldpInfoRemoteDevicesRemoteTTL
The remote TTL of the LLDP remote devices entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.3
lldpInfoRemoteDevicesRxChanges
The rxChanges field of the LLDP remote devices entry.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.4
lldpInfoRemoteDevicesLocalPort
The local port alias of the LLDP remote devices entry.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.5
lldpInfoRemoteDevicesChassisSubtype
The chassis ID subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7locallyAssigned
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.6
lldpInfoRemoteDevicesChassisId
The chassis ID of the LLDP remote devices entry.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.7
lldpInfoRemoteDevicesPortSubtype
The port ID subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7locallyAssigned
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.8
lldpInfoRemoteDevicesPortId
The port ID of the LLDP remote devices entry.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.9
lldpInfoRemoteDevicesSystemName
The system name of the LLDP remote devices entry.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.10
lldpInfoRemoteDevicesSystemDescription
The system description of the LLDP remote devices entry.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.11
lldpInfoRemoteDevicesPortDescription
The port description of the LLDP remote devices entry.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.12
lldpInfoRemoteDevicesSystemCapSupported
The supported system capabilities of the LLDP remote devices entry.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.13
lldpInfoRemoteDevicesSystemCapEnabled
The enabled system capabilities of the LLDP remote devices entry.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.14
lldpInfoRemoteDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.15

lldpInfoRemoteDevicesManAddrTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.11.5 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesManAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::lldpInfoRemoteDevicesManAddrTable' 
The table of LLDP remote devices management address Info.
lldpInfoRemoteDevicesManAddrEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1
LLDP remote devices management address Info.
Indexes
Column Syntax OID
lldpInfoRemoteDevicesManAddrSubtype
The management address subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6all802
7e163
8e164
9f69
10x121
11ipx
12appletalk
13decnetIV
14banyanVines
15e164withNsap
16dns
17distinguishedname
18asnumber
19xtpoveripv4
20xtpoveripv6
21xtpnativemodextp
65535reserved
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.1
lldpInfoRemoteDevicesManAddr
The management address of the LLDP remote devices entry.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.2
lldpInfoRemoteDevicesManAddrIfSubtype
The interface numbering subtype of the LLDP remote devices
management address entry.
Enumeration
Enumerated Values:
1unknown
2ifIndex
3systemPortNumber
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.3
lldpInfoRemoteDevicesManAddrIfId
The interface number of the LLDP remote devices management address
entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.4
lldpInfoRemoteDevicesManAddrOID
The object identifier of the LLDP remote devices management address
entry.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.5

failoverInfoTriggerTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.14.3 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverInfoTriggerTable' 
This table holds the information for individual triggers
failoverInfoTriggerEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1
A row in the failover trigger table.
Indexes
Column Syntax OID
failoverInfoTriggerId
The trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.1
failoverInfoTriggerState
The trigger state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.2
failoverInfoTriggerLimit
Limit number of operational links
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.3
failoverInfoTriggerMonitorState
The runtime monitor state
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.4
failoverInfoTriggerMonitorPorts
The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.5
failoverInfoTriggerControlState
The runtime control state
Enumeration
Enumerated Values:
1auto-controlled
2auto-disabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.6
failoverInfoTriggerControlPorts
The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.7
failoverInfoTriggerControlVports
The list of vPorts that are monitored
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.8
failoverInfoTriggerFabricPathMonitor
The Fabric Path monitoring State
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.9

failoverInfoMonPortStateTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.14.4 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoMonPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverInfoMonPortStateTable' 
This table holds the information for individual triggers
failoverInfoTriggerMonPortEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1
A row in the failover trigger table.
Indexes
Column Syntax OID
failoverInfoTriggerMonId
The trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.1
failoverInfoTriggerMonPortId
The Port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.2
failoverInfoTriggerMonPortStatus
The Port Status.
Enumeration
Enumerated Values:
0failed
1operational
2detached
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.3
failoverInfoTriggerMonPortAlias
The Port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.4

failoverInfoCtlPortStateTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.14.5 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoCtlPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverInfoCtlPortStateTable' 
This table holds the information for individual triggers
failoverInfoTriggerCtlPortEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1
A row in the failover trigger table.
Indexes
Column Syntax OID
failoverInfoTriggerCtlId
The trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.1
failoverInfoTriggerCtlPortId
The Port identifier.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.2
failoverInfoTriggerCtlPortStatus
The Port Status.
Enumeration
Enumerated Values:
0failed
1operational
2detached
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.3
failoverInfoTriggerCtlPortAlias
The Port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.4

failoverInfoCtlVportStateTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.14.6 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoCtlVportStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::failoverInfoCtlVportStateTable' 
This table holds the information for individual triggers
failoverInfoTriggerCtlVportEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1
A row in the failover trigger table.
Indexes
Column Syntax OID
failoverInfoCtlVportTriggerId
The trigger identifier of vPort.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.1
failoverInfoCtlVportPortId
The Port identifier of vPort.
PortNumber .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.2
failoverInfoCtlVportId
The Index identifier of vPort.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.3
failoverInfoCtlVportStatus
The vPort Status.
Enumeration
Enumerated Values:
0failed
1operational
2detached
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.4
failoverInfoCtlVportPortAlias
The Port alias of vPort.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.5

ecpChnlInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.17.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ecpChnlInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ecpChnlInfoTable' 
The table of ECP channel Info.
ecpChnlInfoEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1
Information about ECP channel.
Indexes
Column Syntax OID
ecpChnlInfoEntryIndex
The index of the ecp chnl info table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.1
ecpChnlPortIndex
The ecp channel port info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.2
ecpChnlStag
The ecp channel stag info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.3
ecpChnlSndlen
The ecp channel send length info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.4
ecpChnlSndnxt
The ecp channel send next info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.5
ecpChnlRcvlast
The ecp channel recv last sequence info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.6
ecpChnlStateMachine
The ecp channel state machineinfo.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.7
ecpChnlRxCnt
The ecp channel Rx count info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.8
ecpChnlTxCnt
The ecp channel Tx count info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.9
ecpChnlRxDrop
The ecp channel RxDrop info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.10
ecpChnlTxDrop
The ecp channel TxDrop info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.11
ecpChnlState
The ecp channel state info.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.12
ecpChnlAckErr
The ecp channel ACK error info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.13
ecpChnlPortAlias
The ecp channel port alias info.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.14

slpInfoListeningIPInterfaceTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoListeningIPInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::slpInfoListeningIPInterfaceTable' 
A table with all the SLP listening IP interfaces.
slpInfoListeningIPInterfaceEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1
The configuration objects for a SLP listening IP interface.
Indexes
Column Syntax OID
listeningIPInterfaceId
The identifier of this IP interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.1
listeningIPInterfaceAddress
The adddress of this IP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.2

slpInfoDirectoryAgentsTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoDirectoryAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::slpInfoDirectoryAgentsTable' 
A table with all the SLP Directory Agents.
slpInfoDirectoryAgentEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1
The configuration objects for a Directory Agent entry.
Indexes
Column Syntax OID
directoryAgentAddress
The IP adddress of this Directory Agent.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.1
directoryAgentPort
The port of this Directory Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.2
directoryAgentTime
The time elapsed from the moment when this Directory Agent
was learned measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.3

slpInfoUserAgentsTable

table
.1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoUserAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::slpInfoUserAgentsTable' 
A table with all the SLP User Agents.
slpInfoUserAgentEntry row .1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1
The configuration objects for a User Agent entry.
Indexes
Column Syntax OID
userAgentAddress
The IP adddress of this User Agent.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.1
userAgentPort
The port of this User Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.2
userAgentTime
The time elapsed from the moment when this User Agent was learned
measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.3

ipCurCfgDataIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgDataIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ipCurCfgDataIntfTable' 
The table of data IPv4/IPv6 interface in the current configuration block.
ipCurCfgDataIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1
A row in the data IPv4/IPv6 interface configuration table
Indexes
Column Syntax OID
ipCurCfgDataIntfIndex
The interface number for which the data IPv4/IPv6 interface information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.1
ipCurCfgDataIntfAddr
The data IPv4/IPv6 address of the interface
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.2
ipCurCfgDataIntfMask
The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.3
ipCurCfgDataIntfBroadcastobsolete
The broadcast address of the data IP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.4
ipCurCfgDataIntfVlan
The VLAN associated with the data IPv4/IPv6 interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.5
ipCurCfgDataIntfState
The state of the data IPv4/IPv6 interface.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.6

ipNewCfgDataIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgDataIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ipNewCfgDataIntfTable' 
The table of data IPv4/IPv6 interface in the new configuration block.
ipNewCfgDataIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1
A row in the data IPv4/IPv6 interface table
Indexes
Column Syntax OID
ipNewCfgDataIntfIndex
The interface number for which the data IPv4/IPv6 information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.1
ipNewCfgDataIntfAddr
This field configures the new data IPv4/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.2
ipNewCfgDataIntfMask
The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.3
ipNewCfgDataIntfVlan
The VLAN associated with the data IPv4/IPv6 interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.4
ipNewCfgDataIntfState
The state of the data IPv4/IPv6 interface.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.5
ipNewCfgDataIntfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.6

ip4CurCfgMgmtIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4CurCfgMgmtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4CurCfgMgmtIntfTable' 
The table of fabric units management IPv4 interface in the current configuration block.
ip4CurCfgMgmtIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1
A row in the fabric unit management IPv4 interface configuration table
Indexes
Column Syntax OID
ip4CurCfgMgmtIntfMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.1
ip4CurCfgMgmtIntfAddr
The management IPv4 address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.2
ip4CurCfgMgmtIntfMask
The managemnt IPv4 subnet mask of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.3
ip4CurCfgMgmtIntfDHCPState
The management IPv4 DHCP state of the interface.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.4
ip4CurCfgMgmtIntfState
The management IPv4 interface state.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.5

ip4NewCfgMgmtIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.6 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4NewCfgMgmtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4NewCfgMgmtIntfTable' 
The table of fabric units management IPv4 interface in the new configuration block.
ip4NewCfgMgmtIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1
A row in the fabric unit management IPv4 interface configuration table
Indexes
Column Syntax OID
ip4NewCfgMgmtIntfMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.1
ip4NewCfgMgmtIntfAddr
The management IPv4 address of the interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.2
ip4NewCfgMgmtIntfMask
The management IPv4 subnet mask of the interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.3
ip4NewCfgMgmtIntfState
The state of the management IPv4 interface.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.4
ip4NewCfgMgmtIntfDHCPState
The DHCP state of the management IPv4 interface.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.5
ip4NewCfgMgmtIntfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.6

ip6CurCfgMgmtIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.8 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6CurCfgMgmtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6CurCfgMgmtIntfTable' 
The table of fabric units management IPv6 interface in the current configuration block.
ip6CurCfgMgmtIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1
A row in the fabric unit management IPv6 interface configuration table
Indexes
Column Syntax OID
ip6CurCfgMgmtIntfMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.1
ip6CurCfgMgmtIntfAddr
The management IPv6 address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.2
ip6CurCfgMgmtIntfMask
The managemnt IPv6 prefix length of the interface.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.3
ip6CurCfgMgmtIntfState
The state of the management IPv6 interface.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.4

ip6NewCfgMgmtIntfTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.1.9 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6NewCfgMgmtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6NewCfgMgmtIntfTable' 
The table of fabric units management IPv6 interface in the new configuration block.
ip6NewCfgMgmtIntfEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1
A row in the fabric unit management IPv6 interface configuration table
Indexes
Column Syntax OID
ip6NewCfgMgmtIntfMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.1
ip6NewCfgMgmtIntfAddr
This field configures the new management IPv6 addr of the interface.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.2
ip6NewCfgMgmtIntfMask
The management IPv6 prefix length of the interface.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.3
ip6NewCfgMgmtIntfState
The state of the management IPv6 interface.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.4
ip6NewCfgMgmtIntfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.5

ip4CurCfgDataGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4CurCfgDataGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4CurCfgDataGwTable' 
The table of data IPv4 gateways in the current configuration block.
ip4CurCfgDataGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1
A row in the data IPv4 default gateway table
Indexes
Column Syntax OID
ip4CurCfgDataGwIndex
The default gateway number for which the data IPv4 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.1
ip4CurCfgDataGwAddr
The data IPv4 address of the default gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.2
ip4CurCfgDataGwInterval
The interval between ping attempts.
Integer32
Constraints:
range: 0-60
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.3
ip4CurCfgDataGwRetry
The number of failed attempts to declare the default gateway DOWN.
Integer32
Constraints:
range: 1-120
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.4
ip4CurCfgDataGwState
The state of the data IPv4 default gateway.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.5
ip4CurCfgDataGwArp
The state of ARP only health checks.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.6

ip4NewCfgDataGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4NewCfgDataGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4NewCfgDataGwTable' 
The table of data IPv4 default gateway in the new configuration block.
ip4NewCfgDataGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1
A row in the data IPv4 default gateway configuration table
Indexes
Column Syntax OID
ip4NewCfgDataGwIndex
The default gateway number for which the data IPv4 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.1
ip4NewCfgDataGwAddr
The data IPv4 address of the default gateway.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.2
ip4NewCfgDataGwInterval
The interval in seconds between ping attempts.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.3
ip4NewCfgDataGwRetry
The number of failed attempts to declare the default gateway DOWN.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.4
ip4NewCfgDataGwState
The state of the data IPv4 default gateway.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.5
ip4NewCfgDataGwDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.6
ip4NewCfgDataGwArp
The state of the ARP only health checks.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.7

ip6CurCfgDataGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6CurCfgDataGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6CurCfgDataGwTable' 
The table of data IPv6 gateways in the current configuration block.
ip6CurCfgDataGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1
A row in the data IPv6 default gateway table
Indexes
Column Syntax OID
ip6CurCfgDataGwIndex
The default gateway number for which the data IPv6 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.1
ip6CurCfgDataGwAddr
The data IPv6 address of the default gateway.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.2
ip6CurCfgDataGwState
The state of the data IPv6 default gateway.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.3

ip6NewCfgDataGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.6 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6NewCfgDataGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6NewCfgDataGwTable' 
The table of data IPv6 default gateway in the new configuration block.
ip6NewCfgDataGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1
A row in the data IPv6 default gateway configuration table
Indexes
Column Syntax OID
ip6NewCfgDataGwIndex
The default gateway number for which the data IPv6 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.1
ip6NewCfgDataGwAddr
This field configures the new data IPv6 addr of the default gateway.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.2
ip6NewCfgDataGwState
The state of the data IPv6 default gateway.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.3
ip6NewCfgDataGwDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.4

ip4CurCfgMgmtGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.8 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4CurCfgMgmtGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4CurCfgMgmtGwTable' 
The table of fabric units management IPv4 default gateway in
current configuration block.
ip4CurCfgMgmtGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1
A row in the fabric unit management IPv4 default gateway configuration table
Indexes
Column Syntax OID
ip4CurCfgMgmtGwMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.1
ip4CurCfgMgmtGwAddr
The management IPv4 address of the default gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.2
ip4CurCfgMgmtGwInterval
The interval between ping attempts.
Integer32
Constraints:
range: 0-60
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.3
ip4CurCfgMgmtGwRetry
The number of failed attempts to declare the gateway DOWN.
Integer32
Constraints:
range: 1-120
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.4
ip4CurCfgMgmtGwState
The state of the management IPv4 default gateway.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.5

ip4NewCfgMgmtGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.9 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4NewCfgMgmtGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4NewCfgMgmtGwTable' 
The table of fabric units management IPv4 default gateway in the
new configuration block.
ip4NewCfgMgmtGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1
A row in the fabric unit management IPv4 default gateway configuration table
Indexes
Column Syntax OID
ip4NewCfgMgmtGwMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.1
ip4NewCfgMgmtGwAddr
The management IPv4 address of the default gateway.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.2
ip4NewCfgMgmtGwInterval
The interval between ping attempts.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.3
ip4NewCfgMgmtGwRetry
The number of failed attempts to declare the gateway DOWN.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.4
ip4NewCfgMgmtGwState
The state of the management IPv4 default gateway.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.5
ip4NewCfgMgmtGwDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.6

ip6CurCfgMgmtGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.11 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6CurCfgMgmtGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6CurCfgMgmtGwTable' 
The table of fabric units management IPv6 default gateway in
current configuration block.
ip6CurCfgMgmtGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1
A row in the fabric unit management IPv6 default gateway configuration table
Indexes
Column Syntax OID
ip6CurCfgMgmtGwMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.1
ip6CurCfgMgmtGwAddr
The management IPv6 address of the default gateway.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.2
ip6CurCfgMgmtGwState
The state of the management IPv6 default gateway.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.3

ip6NewCfgMgmtGwTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.2.12 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6NewCfgMgmtGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6NewCfgMgmtGwTable' 
The table of fabric units management IPv6 default gateway in the
new configuration block.
ip6NewCfgMgmtGwEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1
A row in the fabric unit management IPv6 default gateway configuration table
Indexes
Column Syntax OID
ip6NewCfgMgmtGwMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.1
ip6NewCfgMgmtGwAddr
The management IPv6 address of the default gateway.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.2
ip6NewCfgMgmtGwState
The state of the management IPv6 default gateway.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.3
ip6NewCfgMgmtGwDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.4

igmpStaticMrtrCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpStaticMrtrCurCfgTable' 
The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1
A row in the Static Multicast Router table.
Indexes
Column Syntax OID
igmpStaticMrtrCurCfgIndx
The IGMP Multicast Router table port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.1
igmpStaticMrtrCurCfgPortId
The IGMP Multicast Router port in the current configuration block.
PortNumber .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.2
igmpStaticMrtrCurCfgVlanId
The IGMP Multicast Router port in the current configuration block.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.3
igmpStaticMrtrCurCfgVersion
The IGMP version of the IGMP Static Multicast Router.
Enumeration
Enumerated Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.4
igmpStaticMrtrCurCfgPortAlias
The IGMP Multicast Router port alias in the current configuration block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.5

igmpStaticMrtrNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpStaticMrtrNewCfgTable' 
The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1
A row in the Static Multicast Router table.
Indexes
Column Syntax OID
igmpStaticMrtrNewCfgIndx
The IGMP Multicast Router table port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.1
igmpStaticMrtrNewCfgPortId
The IGMP Multicast Router port in the new configuration block.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.2
igmpStaticMrtrNewCfgVlanId
The IGMP Multicast Router port in the new configuration block.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.3
igmpStaticMrtrNewCfgVersion
The IGMP version of the IGMP Static Multicast Router.
Enumerationr/w
Enumerated Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.4
igmpStaticMrtrNewCfgDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.5
igmpStaticMrtrNewCfgPortAlias
The IGMP Multicast Router port alias in the new configuration block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.6

igmpFltCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpFltCurCfgTable' 
The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1
A row in the filtering table.
Indexes
Column Syntax OID
igmpFltCurCfgIndx
The IGMP filter table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.1
igmpFltCurCfgMcastIp1
Range1 Multicast IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.2
igmpFltCurCfgMcastIp2
Range2 Multicast IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.3
igmpFltCurCfgAction
The action for the IGMP filtering rule.
Enumeration
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.4
igmpFltCurCfgState
The state of this IGMP filtering rule.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.5

igmpFltNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpFltNewCfgTable' 
The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1
A row in the filtering table.
Indexes
Column Syntax OID
igmpFltNewCfgIndx
The IGMP filter table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.1
igmpFltNewCfgMcastIp1
Range1 Multicast source IP address to be filtered.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.2
igmpFltNewCfgMcastIp2
Range2 Multicast source IP address to be filtered.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.3
igmpFltNewCfgAction
The action for the IGMP filtering rule.
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.4
igmpFltNewCfgState
The state of this IGMP filtering rule.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.5
igmpFltNewCfgDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.6

igmpFltCurCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpFltCurCfgPortTable' 
The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1
A row in the IGMP filtering port table.
Indexes
Column Syntax OID
igmpFltCurCfgPortIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.1
igmpFltCurCfgPortState
Enable or disable IGMP filtering.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.2
igmpFltCurCfgPortFiltBmap
The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ …
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.3
igmpFltCurCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.4

igmpFltNewCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpFltNewCfgPortTable' 
The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1
A row in the IGMP filtering port table.
Indexes
Column Syntax OID
igmpFltNewCfgPortIndx
The port index.
PortNumber .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.1
igmpFltNewCfgPortState
Enable or disable IGMP filtering.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.2
igmpFltNewCfgPortFiltBmap
The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ f…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.3
igmpFltNewCfgPortAddFiltRule
This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is betw…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.4
igmpFltNewCfgPortRemFiltRule
This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid inde…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.5
igmpFltNewCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.6

igmpSnoopStats

table
.1.3.6.1.4.1.20301.2.7.21.3.2.9.1 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpSnoopStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpSnoopStats' 
Statistics for IGMP Snooping.
igmpSnoopStatsEntry row .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1
Statistics for IGMP Snooping.
Indexes
Column Syntax OID
igmpSnoopVlanIndex
The index of the VLAN for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.1
rxIgmpValidPkts
The total number of valid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.2
rxIgmpInvalidPkts
The total number of invalid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.3
rxIgmpGenQueries
The total number of IGMP General Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.4
rxIgmpGrpSpecificQueries
The total number of IGMP Group Specific Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.5
rxIgmpLeaves
The total number of IGMP Leave packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.6
rxIgmpReports
The total number of IGMP Report packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.7
txIgmpGrpSpecificQueries
The total number of IGMP Group Specific Query packets
transmitted on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.8
txIgmpReports
The total number of IGMP Report packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.9
txIgmpLeaves
The total number of IGMP Leave packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.10
rxIgmpGroupSourceSpecificQueries
The total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.11
rxIgmpV3CurrentStateRecords
The total number of IGMP Current State Records (CSRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.12
rxIgmpV3SourceListChangeRecords
The total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.13
rxIgmpV3FilterChangeRecords
The total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.14
txIgmpGenQueries
The total number of IGMP General Query packets send
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.16
rxIgmpDiscardPkts
The total number of IGMP packets discarded
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.17
rxIgmpPimHellos
The total number of Pim Hello packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.18
igmpClearVlanStats
Setting this to clear(1) results in clearing the statistics for this
snooping VLAN.
Enumerationr/w
Enumerated Values:
1clear
2ok
 .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.19

ip4DataGwInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4DataGwInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4DataGwInfoTable' 
The table of data IPv4 gateway information.
ip4DataGwInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1
A row in the data IPv4 gateway information table
Indexes
Column Syntax OID
ip4DataGwInfoIndex
The default gateway number for which the data IPv4 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.1
ip4DataGwInfoAddr
The data IPv4 default gateway address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.2
ip4DataGwInfoStatus
The data IPv4 default gateway status.
Enumeration
Enumerated Values:
1up
2failed
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.3

ip6DataGwInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6DataGwInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6DataGwInfoTable' 
The table of data IPv6 gateway information.
ip6DataGwInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1
A row in the data IPv6 gateway information table
Indexes
Column Syntax OID
ip6DataGwInfoIndex
The default gateway number for which the data IPv6 default gateway information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.1
ip6DataGwInfoAddr
The data IPv6 default gateway address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.2
ip6DataGwInfoState
The data IPv6 default gateway state.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.3

ip4MgmtGwInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.5.3 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4MgmtGwInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4MgmtGwInfoTable' 
The table of mgmt IPv4 gateway information.
ip4MgmtGwInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1
A row in the mgmt IPv4 gateway information table
Indexes
Column Syntax OID
ip4MgmtGwInfoMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.1
ip4MgmtGwInfoAddr
The mgmt IPv4 default gateway address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.2
ip4MgmtGwInfoState
The mgmt IPv4 default gateway state.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.3

ip6MgmtGwInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.5.4 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6MgmtGwInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6MgmtGwInfoTable' 
The table of mgmt IPv6 gateway information.
ip6MgmtGwInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1
A row in the mgmt IPv6 gateway information table
Indexes
Column Syntax OID
ip6MgmtGwInfoMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.1
ip6MgmtGwInfoAddr
The mgmt IPv6 default gateway address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.2
ip6MgmtGwInfoState
The mgmt IPv6 default gateway state.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.3

igmpInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.6.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpInfoTable' 
The table of IGMP group membership information.
igmpInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1
Information about an IGMP group member .
Indexes
Column Syntax OID
igmpInfoIndex
The igmp group number for which the IGMP info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.1
igmpInfoGroupId
The IP address of the IGMP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.2
igmpInfoVlanId
The VLAN ID for this IGMP group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.3
igmpInfoSrcTrunk
The downstream trunk number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.4
igmpInfoSrcPortIndex
The downstream port number.
PortNumber .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.5
igmpInfoVersion
The Version of IGMP host.
Enumeration
Enumerated Values:
1v3
2v2
3v1
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.6
igmpInfoExpires
The expiration time for this host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.7
igmpInfoMode
The IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2).
Enumeration
Enumerated Values:
1exclude
2include
3na
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.8
igmpInfoSourceIp
The source IP address of the IGMP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.9
igmpInfoFwd
The IGMPv3 forwarding for this source/group IP for this host.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.10
igmpInfoGrpExpires
The expiration time for the group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.11
igmpInfoSrcPortAlias
The downstream port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.12

igmpMrtrInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.6.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpMrtrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::igmpMrtrInfoTable' 
The table of IGMP mrouters.
igmpMrtrInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1
Information about an IGMP mrouter.
Indexes
Column Syntax OID
igmpMrtrInfoIndex
The mrouter number for which the IGMP mrouter info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.1
igmpMrtrInfoVlanId
The VLAN ID on which this IGMP mrouter is attached.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.2
igmpMrtrInfoPortId
The port/portchannel alias on which this IGMP mrouter is attached.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.3
igmpMrtrInfoVersion
The version of this IGMP mrouter.
Enumeration
Enumerated Values:
1v1
2v2
3v3
4pim
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.4
igmpMrtrInfoExpires
The expiration time for this mrouter.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.5
igmpMrtrInfoMrt
The Maximum Query Response time of this IGMP mrouter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.6
igmpMrtrInfoQrv
The Querier Robustness value of this IGMP mrouter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.7
igmpMrtrInfoQqic
The Querier query interval code of this IGMP mrouter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.8
igmpMrtrInfoSrcIp
The Source IP of this IGMP mrouter.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.10
igmpMrtrInfoPortAlias
The port/portchannel alias on which this IGMP mrouter is attached.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.11

ipDataIntfInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.9.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipDataIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ipDataIntfInfoTable' 
The table of data IPv4/IPv6 interface information.
ipDataIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1
A row in the data IPv4/IPv6 interface information table.
Indexes
Column Syntax OID
ipDataIntfInfoIndex
The interface number for which the data IPv4/IPv6 interface information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.1
ipDataIntfInfoAddr
The data IPv4/IPv6 address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.2
ipDataIntfInfoMask
The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.3
ipDataIntfInfoBcastAddr
The data IP broadcast address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.4
ipDataIntfInfoVlan
The data IPv4/IPv6 VLAN state associated with the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.5
ipDataIntfInfoStatus
The data IPv4/IPv6 interface state.
Enumeration
Enumerated Values:
1up
2down
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.6

ip4MgmtIntfInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.9.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4MgmtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4MgmtIntfInfoTable' 
The table of fabric unit management IPv4 interface information.
ip4MgmtIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1
A row in the fabric unit management IPv4 interface information table.
Indexes
Column Syntax OID
ip4MgmtIntfInfoMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.1
ip4MgmtIntfInfoAddr
The management IPv4 address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.2
ip4MgmtIntfInfoMask
The management IPv4 subnet mask of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.3
ip4MgmtIntfInfoDHCPState
The management IPv4 DHCP state of the interface.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.4
ip4MgmtIntfInfoStatus
The management IPv4 interface state.
Enumeration
Enumerated Values:
1up
2down
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.5

ip6MgmtIntfInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.9.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip6MgmtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip6MgmtIntfInfoTable' 
The table of fabric unit management IPv6 interface information.
ip6MgmtIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1
A row in the fabric unit management IPv6 interface information table.
Indexes
Column Syntax OID
ip6MgmtIntfInfoMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.1
ip6MgmtIntfInfoAddr
The management IPv6 address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.2
ip6MgmtIntfInfoMask
The management IPv6 prefix length of the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.3
ip6MgmtIntfInfoStatus
The management IPv6 interface state.
Enumeration
Enumerated Values:
1up
2down
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.4

ip4MgmtEmbeddedIntfInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.3.3.9.4 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ip4MgmtEmbeddedIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ip4MgmtEmbeddedIntfInfoTable' 
The table of fabric unit internal management IPv4 interface information. These interfaces are only present on embedded members
ip4MgmtEmbeddedIntfInfoEntry row .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1
A row in the fabric unit management IPv4 interface information table.
Indexes
Column Syntax OID
ip4MgmtEmbeddedIntfInfoMac
MAC address of the unit.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.1
ip4MgmtEmbeddedIntfInfoAddr
The management IPv4 address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.2
ip4MgmtEmbeddedIntfInfoMask
The management IPv4 subnet mask of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.3
ip4MgmtEmbeddedIntfInfoDHCPState
The management IPv4 DHCP state of the interface.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.4
ip4MgmtEmbeddedIntfInfoStatus
The management IPv4 interface state.
Enumeration
Enumerated Values:
1up
2down
3disabled
 .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.5

qosCurCfgPortPriorityTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgPortPriorityTable' 
The table of QOS Port Priority configuration.
qosCurCfgPortPriorityEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1
Information about a particular QOS Port Priority configuration.
Indexes
Column Syntax OID
qosCurCfgPortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.1
qosCurCfgPortPriority
Switch Port Priority Should be between 0 and 7
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.2
qosCurCfgPortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.3

qosNewCfgPortPriorityTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgPortPriorityTable' 
The table of QOS Port Priority configuration.
qosNewCfgPortPriorityEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1
Information about a particular QOS Port Priority configuration.
Indexes
Column Syntax OID
qosNewCfgPortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.1
qosNewCfgPortPriority
Switch Port Priority Should be between 0 and 7
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.2
qosNewCfgPortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.3

qosCurCfgPriorityCoSTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgPriorityCoSTable' 
The table of Frame Priority and COSq configuration.
qosCurCfgPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1
Information about a particular Frame Priority and COSq configuration.
Indexes
Column Syntax OID
qosCurCfgPriorityIndex
Frame priority Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.1
qosCurCfgPriorityCoSq
CoSq for a Frame Priority Should be between 0 and 7
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.2

qosNewCfgPriorityCoSTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgPriorityCoSTable' 
The table of Frame Priority and COSq configuration.
qosNewCfgPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1
Information about a particular Frame Priority and COSq configuration.
Indexes
Column Syntax OID
qosNewCfgPriorityIndex
Frame priority Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.1
qosNewCfgPriorityCoSq
CoSq for a Frame Priority Should be between 0 and 7
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.2

qosCurCfgCosWeightTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgCosWeightTable' 
The table of CoSq and Weight configuration.
qosCurCfgCosWeightEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1
Information about a particular CoSq and Weight configuration.
Indexes
Column Syntax OID
qosCurCfgCosIndex
CoSq Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.1
qosCurCfgCosWeight
Weight of CoSq
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.2

qosNewCfgCosWeightTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgCosWeightTable' 
The table of CoSq and Weight configuration.
qosNewCfgCosWeightEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1
Information about a particular CoSq and Weight configuration.
Indexes
Column Syntax OID
qosNewCfgCosIndex
CoSq Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.1
qosNewCfgCosWeight
Weight of CoSq
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.2

qosCurCfgMcPriorityCoSTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.7 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgMcPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgMcPriorityCoSTable' 
The table of Frame Priority and Multicast COSq configuration.
qosCurCfgMcPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1
Information about a particular Frame Priority and Multicast COSq configuration.
Indexes
Column Syntax OID
qosCurCfgMcPriorityIndex
Frame priority Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.1
qosCurCfgMcPriorityCoSq
Multicast CoSq for a Frame Priority Should be between 8 and 11
Integer32
Constraints:
range: 8-11
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.2

qosNewCfgMcPriorityCoSTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.8 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgMcPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgMcPriorityCoSTable' 
The table of Frame Priority and Multicast COSq configuration.
qosNewCfgMcPriorityCoSEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1
Information about a particular Frame Priority and Multicast COSq configuration.
Indexes
Column Syntax OID
qosNewCfgMcPriorityIndex
Frame priority Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.1
qosNewCfgMcPriorityCoSq
Multicast CoSq for a Frame Priority Should be between 8 and 11
Integer32r/w
Constraints:
range: 8-11
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.2

qosCurCfgMcCosWeightTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgMcCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgMcCosWeightTable' 
The table of Mc CoSq and Weight configuration.
qosCurCfgMcCosWeightEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1
Information about a particular Mc CoSq and Weight configuration.
Indexes
Column Syntax OID
qosCurCfgMcCosIndex
Multicast CoSq Number
Integer32
Constraints:
range: 8-11
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.1
qosCurCfgMcCosWeight
Weight of Mc CoSq
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.2

qosNewCfgMcCosWeightTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgMcCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgMcCosWeightTable' 
The table of Mc CoSq and Weight configuration.
qosNewCfgMcCosWeightEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1
Information about a particular Mc CoSq and Weight configuration.
Indexes
Column Syntax OID
qosNewCfgMcCosIndex
Multicast CoSq Number
Integer32
Constraints:
range: 8-11
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.1
qosNewCfgMcCosWeight
Weight of Mc CoSq
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.2

qosCurCfgDscpTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgDscpTable' 
The table of Dscp to New Dscp/802.1p priority configuration.
qosCurCfgDscpEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Indexes
Column Syntax OID
qosCurCfgDscpIndex
Dscp value
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.1
qosCurCfgMapDscp
Map Dscp Value
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.2
qosCurCfgMap8021p
Map 802.1p value
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.3

qosNewCfgDscpTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgDscpTable' 
The table of Dscp to New Dscp/802.1p priority configuration.
qosNewCfgDscpEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Indexes
Column Syntax OID
qosNewCfgDscpIndex
Dscp value
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.1
qosNewCfgMapDscp
Map Dscp Value
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.2
qosNewCfgMap8021p
Map 802.1p value
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.3

qosCurCfgPortProfileTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgPortProfileTable' 
The table of QOS port WRED ECN profile configuration.
qoSCurCfgPortProfileEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1
Information about a particular Transmit queue of a port WRED ECN profile configuration.
Indexes
Column Syntax OID
qosCurCfgProfilePortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.1
qosCurCfgTrqIndex
Transmit Queue Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.2
qosCurCfgTrqNonTcpMin
Port Transmit queue WRED ECN nontcp profile MinThreshold value.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.3
qosCurCfgTrqNonTcpMax
Port Transmit queue WRED ECN nontcp profile MaxThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.4
qosCurCfgTrqNonTcpRate
Port Transmit queue WRED ECN nontcp profile DropRate value.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.5
qosCurCfgTrqTcpMin
Port Transmit queue WRED ECN tcp profile MinThreshold value.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.6
qosCurCfgTrqTcpMax
Port Transmit queue WRED ECN tcp profile MaxThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.7
qosCurCfgTrqTcpRate
Port Transmit queue WRED ECN tcp profile DropRate value.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.8
qosCurCfgPortTrqWredState
This is for turning on/off WRED per transmit queue per port.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.9
qosCurCfgProfilePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.10

qosNewCfgPortProfileTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgPortProfileTable' 
The table of QOS Port WRED ECN configuration.
qoSNewCfgPortProfileEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1
Information about a particular Transmit queue of a port WRED ECN configuration.
Indexes
Column Syntax OID
qosNewCfgProfilePortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.1
qosNewCfgTrqIndex
Transmit Queue Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.2
qosNewCfgTrqNonTcpMin
Port Transmit queue WRED ECN nontcp profile MinThreshold value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.3
qosNewCfgTrqNonTcpMax
Port Transmit queue WRED ECN nontcp profile MaxThreshold value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.4
qosNewCfgTrqNonTcpRate
Port Transmit queue WRED ECN nontcp profile DropRate value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.5
qosNewCfgTrqTcpMin
Port Transmit queue WRED ECN tcp profile MinThreshold value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.6
qosNewCfgTrqTcpMax
Port Transmit queue WRED ECN tcp profile MaxThreshold value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.7
qosNewCfgTrqTcpRate
Port Transmit queue WRED ECN tcp profile DropRate value.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.8
qosNewCfgPortTrqWredState
This is for turning on/off WRED per transmit queue per port.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.9
qosNewCfgProfilePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.10

qosCurCfgPortStateTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgPortStateTable' 
The table of QOS port WRED ECN state configuration.
qoSCurCfgPortStateEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1
Information about a particular port WRED ECN state configuration.
Indexes
Column Syntax OID
qosCurCfgStatePortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.1
qosCurCfgPortWredState
This is for turning on/off WRED per port.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.2
qosCurCfgPortEcnState
This is for turning on/off ECN per port.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.3
qosCurCfgStatePortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.4

qosNewCfgPortStateTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgPortStateTable' 
The table of QOS port WRED ECN state configuration.
qoSNewCfgPortStateEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1
Information about a particular port WRED ECN state configuration.
Indexes
Column Syntax OID
qosNewCfgStatePortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.1
qosNewCfgPortWredState
This is for turning on/off WRED per port
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.2
qosNewCfgPortEcnState
This is for turning on/off ECN per port.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.3
qosNewCfgStatePortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.4

qosCurCfgGlobalProfileTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.5 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgGlobalProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosCurCfgGlobalProfileTable' 
The table of QOS global WRED ECN profile configuration.
qoSCurCfgGlobalProfileEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1
Information about a particular Transmit queue of global WRED ECN profile configuration.
Indexes
Column Syntax OID
qosCurCfgGlobalTrqIndex
Global Transmit Queue Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.1
qosCurCfgGlobalTrqNonTcpMin
Global transmit queue WRED ECN nontcp profile MinThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.2
qosCurCfgGlobalTrqNonTcpMax
Global transmit queue WRED ECN nontcp profile MaxThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.3
qosCurCfgGlobalTrqNonTcpRate
Global transmit queue WRED ECN nontcp profile DropRate value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.4
qosCurCfgGlobalTrqTcpMin
Global transmit queue WRED ECN tcp profile MinThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.5
qosCurCfgGlobalTrqTcpMax
Global transmit queue WRED ECN tcp profile MaxThreshold value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.6
qosCurCfgGlobalTrqTcpRate
Global transmit queue WRED ECN tcp profile DropRate value
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.7
qosCurCfgGlobalTrqWredState
This is for turning on/off WRED per global transmit queue
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.8

qosNewCfgGlobalProfileTable

table
.1.3.6.1.4.1.20301.2.7.21.8.1.3.6 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgGlobalProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::qosNewCfgGlobalProfileTable' 
The table of QOS global WRED ECN profile configuration.
qoSNewCfgGlobalProfileEntry row .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1
Information about a particular Transmit queue of global WRED ECN profile configuration.
Indexes
Column Syntax OID
qosNewCfgGlobalTrqIndex
Global Transmit Queue Number
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.1
qosNewCfgGlobalTrqNonTcpMin
Global transmit queue WRED ECN nontcp profile MinThreshold value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.2
qosNewCfgGlobalTrqNonTcpMax
Global transmit queue WRED ECN nontcp profile MaxThreshold value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.3
qosNewCfgGlobalTrqNonTcpRate
Global transmit queue WRED ECN nontcp profile DropRate value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.4
qosNewCfgGlobalTrqTcpMin
Global transmit queue WRED ECN tcp profile MinThreshold value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.5
qosNewCfgGlobalTrqTcpMax
Global transmit queue WRED ECN tcp profile MaxThreshold value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.6
qosNewCfgGlobalTrqTcpRate
Global transmit queue WRED ECN tcp profile DropRate value
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.7
qosNewCfgGlobalTrqWredState
This is for turning on/off WRED per global transmit queue
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.8

aclCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.1.1 · 1 row entry · 45 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclCurCfgTable' 
The table of current ACL configuration.
aclCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1
Current information about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclCurCfgIndex
The index associated with this ACL entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.1
aclCurCfgGroup
The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.3
aclCurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.4
aclCurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this ACL entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.5
aclCurCfgEthFmt
The packet ethernet format to be filtered.
Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.6
aclCurCfgTagFmt
The packet tag format to be filtered.
Enumeration
Enumerated Values:
1disabled
2any
3untagged
4tagged
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.7
aclCurCfgIPFmt
The packet IP format to be filtered.
Enumeration
Enumerated Values:
1none
2ipv4
3ipv6
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.8
aclCurCfgSrcMACAddress
The source MAC address to be filtered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.9
aclCurCfgSrcMACMask
The address mask applied to aclCurCfgSrcMACAddress for filtering.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.10
aclCurCfgDstMACAddress
The destination MAC address to be filtered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.11
aclCurCfgDstMACMask
The address mask applied to aclCurCfgDstMACAddress for filtering.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.12
aclCurCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.13
aclCurCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.14
aclCurCfgVLanId
The virtual LAN identifier to be filtered.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.15
aclCurCfgVLanMask
The mask applied to aclCurCfgVLanId for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.16
aclCurCfg8021pPriority
The 802.1p priority to be filtered.
Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.17
aclCurCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.18
aclCurCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.19
aclCurCfgSrcIPAddress
The source IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.20
aclCurCfgSrcIPMask
The address mask applied to aclCurCfgSrcIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.21
aclCurCfgDstIPAddress
The destination IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.22
aclCurCfgDstIPMask
The address mask applied to aclCurCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.23
aclCurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.24
aclCurCfgSrcPortMask
The mask applied to aclCurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.25
aclCurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.26
aclCurCfgDstPortMask
The mask applied to aclCurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.27
aclCurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.28
aclCurCfgEgressPortIndexes
The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.29
aclCurCfgStatistics
Whether statistics collection for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.30
aclCurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.39
aclCurCfgMeterAction
Meter Action for this ACL.
Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.41
aclCurCfgMeterEnable
Meter state for this ACL.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.42
aclCurCfgKbitsSec
The commited rate of meter associated with this ACL entry.
Unsigned32
Constraints:
range: 64-40000000
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.43
aclCurCfgKbitsBurst
The maxmium burst sizeof meter associated with this ACL entry.
Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.44
aclCurCfgUser
Set user defined priority for this ACL.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.45
aclCurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.46
aclCurCfgTos
To enable/disable setting pkts based on TOS bits.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.47
aclCurCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.48
aclCurCfgUserEnable
Set update method for this ACL.
Enumeration
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.49
aclCurCfgInprofDscpEnable
Whether in profile update DSCP for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.50
aclCurCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.51
aclCurCfgMirrorPortIndex
Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.74
aclCurCfgLog
Whether log for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.81
aclCurCfgMirrorPortAlias
The mirror port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.91
aclCurCfgEgressPortAliases
The egress port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.92

aclNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.1.2 · 1 row entry · 59 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclNewCfgTable' 
The table of new ACL configuration.
aclNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1
New information about a particular ACL configuration.
Indexes
Column Syntax OID
aclNewCfgIndex
The index associated with this ACL entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.1
aclNewCfgGroup
The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.3
aclNewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.4
aclNewCfgFilterActionSetPrio
The COS queue to be used when the action for this ACL entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.5
aclNewCfgEthFmt
The packet ethernet format to be filtered.
Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.6
aclNewCfgTagFmt
The packet tagging format to be filtered.
Enumerationr/w
Enumerated Values:
1disabled
2any
3none
4tagged
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.7
aclNewCfgIPFmt
The packet IP format to be filtered.
Enumerationr/w
Enumerated Values:
1none
2ipv4
3ipv6
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.8
aclNewCfgSrcMACAddress
The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.9
aclNewCfgSrcMACMask
The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.10
aclNewCfgDstMACAddress
The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.11
aclNewCfgDstMACMask
The address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.12
aclNewCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.13
aclNewCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.14
aclNewCfgVLanId
The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan …
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.15
aclNewCfgVLanMask
The mask to be applied to aclNewCfgVLanId for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.16
aclNewCfg8021pPriority
The 802.1p priority to be filtered.
Enumerationr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.17
aclNewCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.18
aclNewCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.19
aclNewCfgSrcIPAddress
The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.20
aclNewCfgSrcIPMask
The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.21
aclNewCfgDstIPAddress
The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.22
aclNewCfgDstIPMask
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.23
aclNewCfgSrcPort
The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.24
aclNewCfgSrcPortMask
The mask to be applied to aclNewCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.25
aclNewCfgDstPort
The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.26
aclNewCfgDstPortMask
The mask to be applied to aclNewCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.27
aclNewCfgTCPFlags
The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.28
aclNewCfgEgressPortIndexes
The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.29
aclNewCfgStatistics
Whether statistics collection for this ACL is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.30
aclNewCfgAddEgressPortIndex
The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.31
aclNewCfgRemoveEgressPortIndex
The port to be removed from the specified ACL. A value of zero
is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.32
aclNewCfgDelete
This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.33
aclNewCfgTCPFlagsMask
The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.39
aclNewCfgMeterAction
Meter Action for this ACL.
Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.41
aclNewCfgMeterEnable
Meter state for this ACL.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.42
aclNewCfgKbitsSec
The commited rate of meter associated with this ACL entry.
Unsigned32r/w
Constraints:
range: 64-40000000
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.43
aclNewCfgKbitsBurst
The maximum burst size of the meter associated with this ACL entry.
Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.44
aclNewCfgUser
Set user defined priority for this ACL.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.45
aclNewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.46
aclNewCfgTos
To enable/disable setting pkts based on TOS bits.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.47
aclNewCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.48
aclNewCfgUserEnable
Set update method for this ACL.
Enumerationr/w
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.49
aclNewCfgInprofDscpEnable
Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.50
aclNewCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.51
aclNewCfgReset
This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.52
aclNewCfgEthernetReset
This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.53
aclNewCfgIpv4Reset
This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.54
aclNewCfgTcpudpReset
This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.55
aclNewCfgMeterReset
This is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.56
aclNewCfgRemarkReset
This is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.57
aclNewCfgRemarkInprofReset
This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.58
aclNewCfgRemarkOutprofReset
This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.59
aclNewCfgPktfmtReset
This is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.60
aclNewCfgMirrorPortIndex
Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.74
aclNewCfgLog
Whether log for this ACL is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.81
aclNewCfgMirrorPortAlias
The mirror port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.91
aclNewCfgEgressPortAliases
The egress port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.92
aclNewCfgAddEgressPortAlias
The port to be added using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.93
aclNewCfgRemoveEgressPortAlias
The port to be removed using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.94

aclGroupCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclGroupCurCfgTable' 
The table of current ACL Group configuration.
aclGroupCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1
Information about a particular ACL configuration.
Indexes
Column Syntax OID
aclGroupCurCfgIndex
The index associated with this ACL Group entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.1
aclGroupCurCfgMemberAcls
The ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.2
aclGroupCurCfgMemberAcl6s
The ACL6 members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.9

aclGroupNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.3.2 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclGroupNewCfgTable' 
The table of new ACL Group configuration.
aclGroupNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1
New information about a particular ACL configuration.
Indexes
Column Syntax OID
aclGroupNewCfgIndex
The index associated with this ACL Group entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.1
aclGroupNewCfgMemberAcls
The ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.2
aclGroupNewCfgAddAcl
The index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is alway…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.4
aclGroupNewCfgRemoveAcl
The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.5
aclGroupNewCfgDelete
This is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.8
aclGroupNewCfgMemberAcl6s
The ACL6 members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . .…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.9
aclGroupNewCfgAddAcl6
The index of the ACL6 entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s
bitmap. A value of zero is al…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.10
aclGroupNewCfgRemoveAcl6
The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.11

aclCurCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclCurCfgPortTable' 
The table of port acl groups configuration.
aclCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1
Information about a particular port acl configuration.
Indexes
Column Syntax OID
aclCurCfgPortIndex
The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.1
aclCurCfgPortAclBmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.2
aclCurCfgPortAclGrpBmap
The acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.4
aclCurCfgPortAcl6Bmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.13
aclCurCfgPortAlias
The alias of a particular port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.14

aclNewCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.4.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::aclNewCfgPortTable' 
The table of port acl configuration.
aclNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1
Information about a particular port acl groups configuration.
Indexes
Column Syntax OID
aclNewCfgPortIndex
The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.1
aclNewCfgPortAddAcl
The acl to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.2
aclNewCfgPortAddAclGrp
The acl group to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.4
aclNewCfgPortRemoveAcl
The acl to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.5
aclNewCfgPortRemoveAclGrp
The acl group to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.7
aclNewCfgPortAclBmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.8
aclNewCfgPortAclGrpBmap
The acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....
xxx…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.10
aclNewCfgPortAddAcl6
The acl6 to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.11
aclNewCfgPortRemoveAcl6
The acl6 to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.12
aclNewCfgPortAcl6Bmap
The acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || …
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.13
aclNewCfgPortAlias
The alias of a particular port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.14

acl6CurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.5.1 · 1 row entry · 32 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6CurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::acl6CurCfgTable' 
The table of current ACL6 configuration.
acl6CurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1
Current information about a particular ACL6 configuration entry.
Indexes
Column Syntax OID
acl6CurCfgIndex
The index associated with this ACL6 entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.1
acl6CurCfgGroup
The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.2
acl6CurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.3
acl6CurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this ACL6 entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.4
acl6CurCfgSrcIPv6Address
The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxx…
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.5
acl6CurCfgSrcIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.6
acl6CurCfgDstIPv6Address
The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.7
acl6CurCfgDstIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.8
acl6CurCfgIPv6FlowLabel
The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.9
acl6CurCfgIPv6TrafficClass
The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.10
acl6CurCfgIPv6NextHeader
The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.11
acl6CurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.12
acl6CurCfgSrcPortMask
The mask applied to acl6CurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.13
acl6CurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.14
acl6CurCfgDstPortMask
The mask applied to acl6CurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.15
acl6CurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.16
acl6CurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.17
acl6CurCfgEgressPortIndexes
The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.18
acl6CurCfgStatistics
Whether statistics collection for this ACL6 is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.19
acl6CurCfgUser
Set user defined priority for this ACL6.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.20
acl6CurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.21
acl6CurCfgTos
To enable/disable setting pkts based on TOS bits.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.22
acl6CurCfgUserEnable
Set update method for this ACL6.
Enumeration
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.24
acl6CurCfgInprofDscpEnable
Whether in profile update DSCP for this ACL6 is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.25
acl6CurCfgLog
Whether log for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.26
acl6CurCfgMeterAction
Meter Action for this ACL.
Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.28
acl6CurCfgMeterEnable
Meter state for this ACL.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.29
acl6CurCfgKbitsSec
The commited rate of meter associated with this ACL entry.
Unsigned32
Constraints:
range: 64-40000000
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.30
acl6CurCfgKbitsBurst
The maxmium burst sizeof meter associated with this ACL entry.
Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.31
acl6CurCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.32
acl6CurCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.33
acl6CurCfgEgressPortAliases
The port alias in the ACL6 configured for egress filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.34

acl6NewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.1.5.2 · 1 row entry · 42 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6NewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::acl6NewCfgTable' 
The table of new ACL6 configuration.
acl6NewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1
New information about a particular ACL6 configuration.
Indexes
Column Syntax OID
acl6NewCfgIndex
The index associated with this ACL6 entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.1
acl6NewCfgGroup
The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.2
acl6NewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.3
acl6NewCfgFilterActionSetPrio
The COS queue to be used when the action for this ACL6 entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.4
acl6NewCfgSrcIPv6Address
The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::x…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.5
acl6NewCfgSrcIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.6
acl6NewCfgDstIPv6Address
The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.7
acl6NewCfgDstIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.8
acl6NewCfgIPv6FlowLabel
The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.9
acl6NewCfgIPv6TrafficClass
The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.10
acl6NewCfgIPv6NextHeader
The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.11
acl6NewCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.12
acl6NewCfgSrcPortMask
The mask applied to acl6CurCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.13
acl6NewCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.14
acl6NewCfgDstPortMask
The mask applied to acl6CurCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.15
acl6NewCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.16
acl6NewCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.17
acl6NewCfgEgressPortIndexes
The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.18
acl6NewCfgStatistics
Whether statistics collection for this ACL6 is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.19
acl6NewCfgAddEgressPortIndex
The port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.20
acl6NewCfgRemoveEgressPortIndex
The port to be removed from the specified ACL6. A value of zero
is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.21
acl6NewCfgDelete
This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.22
acl6NewCfgUser
Set user defined priority for this ACL6.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.23
acl6NewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.24
acl6NewCfgTos
To enable/disable setting pkts based on TOS bits.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.25
acl6NewCfgUserEnable
Set update method for this ACL6.
Enumerationr/w
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.27
acl6NewCfgInprofDscpEnable
Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.28
acl6NewCfgIPv6Reset
This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.30
acl6NewCfgTcpudpReset
This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.31
acl6NewCfgRemarkInprofReset
This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.32
acl6NewCfgLog
Whether log for this ACL is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.33
acl6NewCfgMeterAction
Meter Action for this ACL.
Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.35
acl6NewCfgMeterEnable
Meter state for this ACL.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.36
acl6NewCfgKbitsSec
The commited rate of meter associated with this ACL entry.
Unsigned32r/w
Constraints:
range: 64-40000000
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.37
acl6NewCfgKbitsBurst
The maximum burst size of the meter associated with this ACL entry.
Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.38
acl6NewCfgMeterReset
This is an action object to reset an ACL6 Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.39
acl6NewCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.40
acl6NewCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.41
acl6NewCfgRemarkOutprofReset
This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.42
acl6NewCfgAddEgressPortAlias
The port alias to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.43
acl6NewCfgRemoveEgressPortAlias
The port alias to be removed from the specified ACL6. A value of zero
is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.44
acl6NewCfgEgressPortAliases
The port alias in the ACL6 configured for egress filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.45

vmapCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.1.1 · 1 row entry · 41 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapCurCfgTable' 
The table of current VMAP configuration.
vmapCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1
Current information about a particular VMAP configuration entry.
Indexes
Column Syntax OID
vmapCurCfgIndex
The index associated with this VMAP entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.1
vmapCurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.2
vmapCurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this VMAP entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.3
vmapCurCfgEthFmt
The packet ethernet format to be filtered.
Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.4
vmapCurCfgTagFmt
The packet tag format to be filtered.
Enumeration
Enumerated Values:
1disabled
2any
3untagged
4tagged
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.5
vmapCurCfgIPFmt
The packet IP format to be filtered.
Enumeration
Enumerated Values:
1none
2ipv4
3ipv6
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.6
vmapCurCfgSrcMACAddress
The source MAC address to be filtered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.7
vmapCurCfgSrcMACMask
The address mask applied to aclCurCfgSrcMACAddress for filtering.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.8
vmapCurCfgDstMACAddress
The destination MAC address to be filtered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.9
vmapCurCfgDstMACMask
The address mask applied to aclCurCfgDstMACAddress for filtering.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.10
vmapCurCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.11
vmapCurCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.12
vmapCurCfg8021pPriority
The 802.1p priority to be filtered.
Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.13
vmapCurCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.14
vmapCurCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.15
vmapCurCfgSrcIPAddress
The source IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.16
vmapCurCfgSrcIPMask
The address mask applied to aclCurCfgSrcIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.17
vmapCurCfgDstIPAddress
The destination IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.18
vmapCurCfgDstIPMask
The address mask applied to aclCurCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.19
vmapCurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.20
vmapCurCfgSrcPortMask
The mask applied to aclCurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.21
vmapCurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.22
vmapCurCfgDstPortMask
The mask applied to aclCurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.23
vmapCurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.24
vmapCurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.25
vmapCurCfgEgressPorts
The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.26
vmapCurCfgStatistics
Whether statistics collection for this VMAP is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.27
vmapCurCfgMeterAction
Meter Action for this VMAP.
Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.31
vmapCurCfgMeterEnable
Meter state for this VMAP.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.32
vmapCurCfgKbitsSec
The commited rate of meter associated with this VMAP entry.
Unsigned32
Constraints:
range: 64-10000000
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.33
vmapCurCfgKbitsBurst
The maxmium burst sizeof meter associated with this VMAP entry.
Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.34
vmapCurCfgUser
Set user defined priority for this VMAP.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.35
vmapCurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.36
vmapCurCfgTos
To enable/disable setting pkts based on TOS bits.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.37
vmapCurCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.38
vmapCurCfgUserEnable
Set update method for this VMAP.
Enumeration
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.39
vmapCurCfgInprofDscpEnable
Whether in profile update DSCP for this VMAP is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.40
vmapCurCfgOutprofDscpEnable
Whether out profile update DSCP for this VMAP is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.41
vmapCurCfgMirrorPort
Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.51
vmapCurCfgEgressPortAlias
The port alias in the VMAP configured for egress filtering
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.53
vmapCurCfgMirrorPortAlias
Set port in the VMAP for mirroring using it's alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.54

vmapNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.1.2 · 1 row entry · 55 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapNewCfgTable' 
The table of new VMAP configuration.
vmapNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1
New information about a particular VMAP configuration.
Indexes
Column Syntax OID
vmapNewCfgIndex
The index associated with this VMAP entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.1
vmapNewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.2
vmapNewCfgFilterActionSetPrio
The COS queue to be used when the action for this VMAP entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.3
vmapNewCfgEthFmt
The packet ethernet format to be filtered.
Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.4
vmapNewCfgTagFmt
The packet tagging format to be filtered.
Enumerationr/w
Enumerated Values:
1disabled
2any
3none
4tagged
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.5
vmapNewCfgIPFmt
The packet IP format to be filtered.
Enumerationr/w
Enumerated Values:
1none
2ipv4
3ipv6
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.6
vmapNewCfgSrcMACAddress
The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.7
vmapNewCfgSrcMACMask
The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.8
vmapNewCfgDstMACAddress
The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.9
vmapNewCfgDstMACMask
The address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.10
vmapNewCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.11
vmapNewCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.12
vmapNewCfg8021pPriority
The 802.1p priority to be filtered.
Enumerationr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.13
vmapNewCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.14
vmapNewCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.15
vmapNewCfgSrcIPAddress
The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.16
vmapNewCfgSrcIPMask
The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.17
vmapNewCfgDstIPAddress
The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.18
vmapNewCfgDstIPMask
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.19
vmapNewCfgSrcPort
The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.20
vmapNewCfgSrcPortMask
The mask to be applied to aclNewCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.21
vmapNewCfgDstPort
The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.22
vmapNewCfgDstPortMask
The mask to be applied to aclNewCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.23
vmapNewCfgTCPFlags
The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.24
vmapNewCfgTCPFlagsMask
The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.25
vmapNewCfgEgressPorts
The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.26
vmapNewCfgStatistics
Whether statistics collection for this VMAP is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.27
vmapNewCfgAddEgressPort
The port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.28
vmapNewCfgRemoveEgressPort
The port to be removed from the specified VMAP. A value of zero
is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.29
vmapNewCfgDelete
This is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.30
vmapNewCfgMeterAction
Meter Action for this VMAP.
Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.31
vmapNewCfgMeterEnable
Meter state for this VMAP.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.32
vmapNewCfgKbitsSec
The commited rate of meter associated with this VMAP entry.
Unsigned32r/w
Constraints:
range: 64-10000000
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.33
vmapNewCfgKbitsBurst
The maximum burst size of the meter associated with this VMAP entry.
Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.34
vmapNewCfgUser
Set user defined priority for this VMAP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.35
vmapNewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.36
vmapNewCfgTos
To enable/disable setting pkts based on TOS bits.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.37
vmapNewCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.38
vmapNewCfgUserEnable
Set update method for this VMAP.
Enumerationr/w
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.39
vmapNewCfgInprofDscpEnable
Whether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.40
vmapNewCfgOutprofDscpEnable
Whether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when sett…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.41
vmapNewCfgReset
This is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.42
vmapNewCfgEthernetReset
This is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.43
vmapNewCfgIpv4Reset
This is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.44
vmapNewCfgTcpudpReset
This is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.45
vmapNewCfgMeterReset
This is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.46
vmapNewCfgRemarkReset
This is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.47
vmapNewCfgRemarkInprofReset
This is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.48
vmapNewCfgRemarkOutprofReset
This is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.49
vmapNewCfgPktfmtReset
This is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.50
vmapNewCfgMirrorPort
Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.51
vmapNewCfgEgressPortAliases
The port alias in the VMAP configured for egress filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.53
vmapNewCfgMirrorPortAlias
Set port in the VMAP for mirroring using it's alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.54
vmapNewCfgAddEgressPortAlias
The port to be added using it's alias to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.55
vmapNewCfgRemoveEgressPortAlias
The port to be removed using it's alias from the specified VMAP. A value of zero
is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.56

vmapVlanCurCfgNonServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanCurCfgNonServerPortsTable' 
The table of the current configuration
of vmaps for the non-server ports of vlans.
vmapVlanCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgNonServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.1
vmapVlanCurCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.2

vmapVlanNewCfgNonServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanNewCfgNonServerPortsTable' 
The table of the new configuration
of vmaps for non-server ports of vlans.
vmapVlanNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vlans.
Indexes
Column Syntax OID
vmapVlanNewCfgNonServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.1
vmapVlanNewCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.2
vmapVlanNewCfgNonServerPortsAddVmap
Add a new vmap to the non-server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.3
vmapVlanNewCfgNonServerPortsRemVmap
Remove a vmap from the non-server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.4

vmapVlanCurCfgServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanCurCfgServerPortsTable' 
The table of the current configuration
of vmaps for server ports of vlans.
vmapVlanCurCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.1
vmapVlanCurCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.2

vmapVlanNewCfgServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanNewCfgServerPortsTable' 
The table of the new configuration
of vmaps for server ports of vlans.
vmapVlanNewCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vlans.
Indexes
Column Syntax OID
vmapVlanNewCfgServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.1
vmapVlanNewCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.2
vmapVlanNewCfgServerPortsAddVmap
Add a new vmap to the server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.3
vmapVlanNewCfgServerPortsRemVmap
Remove a vmap from the server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.4

vmapVlanCurCfgAllPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanCurCfgAllPortsTable' 
The table of the current configuration
of vmaps for all ports of vlans.
vmapVlanCurCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1
A row in the table of current configuration
of vmaps for all ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgAllPortsVlanIdx
The vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.1
vmapVlanCurCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.2

vmapVlanNewCfgAllPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapVlanNewCfgAllPortsTable' 
The table of the new configuration
of vmaps for all ports of vlans.
vmapVlanNewCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1
A row in the table of new configuration
of vmaps for all ports of vlans.
Indexes
Column Syntax OID
vmapVlanNewCfgAllPortsVlanIdx
The vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.1
vmapVlanNewCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.2
vmapVlanNewCfgAllPortsAddVmap
Add a new vmap to all ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.3
vmapVlanNewCfgAllPortsRemVmap
Remove a vmap from all vlan ports
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.4

vmapGroupCurCfgNonServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupCurCfgNonServerPortsTable' 
The table of the current configuration
of vmaps for non-server ports of vm groups.
vmapGroupCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vm groups.
Indexes
Column Syntax OID
vmapGroupCurCfgNonServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.1
vmapGroupCurCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.2

vmapGroupNewCfgNonServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupNewCfgNonServerPortsTable' 
The table of the new configuration
of vmaps for non-server ports of vm groups.
vmapGroupNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vm groups.
Indexes
Column Syntax OID
vmapGroupNewCfgNonServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.1
vmapGroupNewCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.2
vmapGroupNewCfgNonServerPortsAddVmap
Add a new vmap to the non-server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.3
vmapGroupNewCfgNonServerPortsRemVmap
Remove a vmap from the non-server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.4

vmapGroupCurCfgServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupCurCfgServerPortsTable' 
The table of the current configuration
of vmaps for server ports of vm groups.
vmapGroupCurCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vm groups.
Indexes
Column Syntax OID
vmapGroupCurCfgServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.1
vmapGroupCurCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.2

vmapGroupNewCfgServerPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupNewCfgServerPortsTable' 
The table of the new configuration
of vmaps for server ports of vm groups.
vmapGroupNewCfgServerPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vm groups.
Indexes
Column Syntax OID
vmapGroupNewCfgServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.1
vmapGroupNewCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.2
vmapGroupNewCfgServerPortsAddVmap
Add a new vmap to the server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.3
vmapGroupNewCfgServerPortsRemVmap
Remove a vmap from the server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.4

vmapGroupCurCfgAllPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupCurCfgAllPortsTable' 
The table of the current configuration
of vmaps for all ports of vm groups.
vmapGroupCurCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1
A row in the table of current configuration
of vmaps for all ports of vm groups.
Indexes
Column Syntax OID
vmapGroupCurCfgAllPortsGroupIdx
The vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.1
vmapGroupCurCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.2

vmapGroupNewCfgAllPortsTable

table
.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmapGroupNewCfgAllPortsTable' 
The table of the new configuration
of vmaps for all ports of vm groups.
vmapGroupNewCfgAllPortsTableEntry row .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1
A row in the table of new configuration
of vmaps for all ports of vm groups.
Indexes
Column Syntax OID
vmapGroupNewCfgAllPortsGroupIdx
The vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.1
vmapGroupNewCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.2
vmapGroupNewCfgAllPortsAddVmap
Add a new vmap to all ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.3
vmapGroupNewCfgAllPortsRemVmap
Remove a vmap from all vm group ports
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.4

switchNumCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.12.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk switchNumCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::switchNumCurCfgTable' 
The table of the current configuration block for the switch numbers
switchNumCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1
A row in the table of the current configuration block for the switch
numbers
Indexes
Column Syntax OID
switchNumberCurCfg
The configured switch number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.1
switchUUIDCurCfg
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top Of Rack switches.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.2
switchBayCurCfg
The chassis bay number the embedded switch is in.
0 is returned for Top Of Rack switches.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.3
switchMACCurCfg
The MAC address for the switch number.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.4
switchDescrCurCfg
A user-defined description for the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.5

switchNumNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.12.1.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk switchNumNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::switchNumNewCfgTable' 
The table of the new configuration block for the switch numbers
switchNumNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1
A row in the table of the new configuration block for the switch
numbers
Indexes
Column Syntax OID
switchNumberNewCfg
The configured switch number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.1
switchUUIDNewCfg
The UUID of the chassis the embedded switch is in.
An empty string is returned for Top Of Rack switches.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.2
switchBayNewCfg
The chassis bay number the embedded switch is in.
0 is returned for Top Of Rack switches.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.3
switchBindToAttachedNewCfg
When written, binds the switch number entry to an attached switch;
when read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.4
switchDeleteNewCfg
When setting delete(1), the switch number entry is deleted;
when read, other(2) is returned.
Enumerationr/w
Enumerated Values:
1delete
2other
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.5
switchMACNewCfg
The MAC address for the switch number.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.6
switchDescrNewCfg
A user-defined description for the switch
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.7

configuredSwitchesTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.3.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk configuredSwitchesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::configuredSwitchesTable' 
The table of the configured switches in fabric
configuredSwitchesEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1
Information about a configured switch
Indexes
Column Syntax OID
confSwitchNumber
The number of the configured switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.1
confSwitchUUID
The UUID of the configured switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.2
confSwitchBay
The number of the bay where the configured switch is located;
0 if the configured switch is not attached to the fabric.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.3
confSwitchMAC
The MAC of the configured switch.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.4
confSwitchAttachedSwNumber
The asnum (attached switch number) of the configured switch;
0 if the switch is not attached to the fabric
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.5
confSwitchMode
The fabric mode for the switch
Enumeration
Enumerated Values:
1master
2backup
3member
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.6

attachedSwitchesTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.3.4 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk attachedSwitchesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::attachedSwitchesTable' 
The table of the attached switches in fabric
attachedSwitchesEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1
Information about an attached switch
Indexes
Column Syntax OID
attachedSwitchNumber
The number of the attached switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.1
attachedSwitchUUID
The UUID of the attached switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.2
attachedSwitchBay
The number of the bay where the attached switch is located.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.3
attachedSwitchMAC
The MAC of the attached switch.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.4
attachedSwitchConfSwNumber
The csnum (configured switch number) of the attached switch;
if the switch is not configured, 0 is returned.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.5
attachedSwitchState
The state of the attached switch.
Enumeration
Enumerated Values:
0unknown
1init
2masterLearnt
3cfgReqSent
4cfgReqRcvd
5cfgApplied
6inFabric
7attach
8forcedDetach
9reqAttach
10unmatch
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.6
attachedSwitchImageSlot
The software image slot used at the current boot
by the attached switch.
Enumeration
Enumerated Values:
1image1
2image2
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.7
attachedSwitchImageVersion
The software version running on the attached switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.8
attachedSwitchSerialNum
The serial number of the attached switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.9
attachedSwitchMode
The fabric mode for the switch
Enumeration
Enumerated Values:
1master
2backup
3member
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.10
attachedSwitchType
The type of the attached switch
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.11

linkInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.4 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk linkInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::linkInfoTable' 
The table of the fabric links
fabricLinkInfoEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.4.1
Information about a fabric link
Indexes
Column Syntax OID
fabricLinkAttachedSwNum
The number of the attached switch to which the fabric port belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.1
fabricLinkSwitchPort
The switch port number of the fabric port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.2
fabricLinkMAC
The MAC of the fabric port.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.3
fabricLinkConfSwNum
The csnum (configured switch number) of the switch
to which the fabric port belongs; 0 if the switch is not configured.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.4
fabricLinkState
The state of the fabric link.
Enumeration
Enumerated Values:
1down
2up
3disabled
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.5
fabricPortTrunkID
The identifier of the trunk to which the fabric port belongs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.6
fabricPortPeerAttachedSwNum
The number of the attached switch (asnum) to which the fabric port
is connected.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.7
fabricPortPeerPortIndex
The number of the fabric port which is at the other end of the link.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.8
fabricPortPeerTrunk
The identifier of the fabric trunk which is at the other end of the
link.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.9
fabricLinkSwitchPortAlias
The switch port alias of the fabric port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.10
fabricPortPeerPortAlias
The alias of the fabric port which is at the other end of the link.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.4.1.11

pushStatusInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.8 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pushStatusInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::pushStatusInfoTable' 
The table for the status of the transfers from the master 
to the attached switches
pushStatusInfoEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.8.1
Information about the transfers from the master
to an attached switch.
Indexes
Column Syntax OID
pushInfoAttachedSwNum
The number of the attached switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.8.1.1
pushInfoImage1
The status of the transfer of image 1 from the master
to the attached switch.
Enumeration
Enumerated Values:
1rcvSuccessful
2rcvFailed
3notReceived
 .1.3.6.1.4.1.20301.2.7.21.12.3.8.1.2
pushInfoImage2
The status of the transfer of image 2 from the master
to the attached switch.
Enumeration
Enumerated Values:
1rcvSuccessful
2rcvFailed
3notReceived
 .1.3.6.1.4.1.20301.2.7.21.12.3.8.1.3
pushInfoBootImage
The status of the transfer of the boot image from the master
to the attached switch.
Enumeration
Enumerated Values:
1rcvSuccessful
2rcvFailed
3notReceived
 .1.3.6.1.4.1.20301.2.7.21.12.3.8.1.4
pushInfoCfgFile
The status of the transfer of the config file from the master
to the attached switch.
Enumeration
Enumerated Values:
1rcvSuccessful
2rcvFailed
3notReceived
 .1.3.6.1.4.1.20301.2.7.21.12.3.8.1.5

fabricTrunkTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.9 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fabricTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fabricTrunkTable' 
The table for the fabric trunks.
fabricTrunkEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.9.1
Information about fabric (fabric) trunk.
Indexes
Column Syntax OID
fabricTrunkID
The identifier of the fabric trunk. The format used is
TrunkxToy where x is the attached switch number of
the source switch and y is the attached switch number of
the destination switch; for example, Trunk2To7 should
id…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.9.1.1
fabricTrunkAttachedSwNum
The attached switch number (asnum) of the switch to which
the fabric trunk belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.9.1.2
fabricTrunkPorts
The bitmap of the local ports which form the fabric trunk.
The ports are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|…
OctetString .1.3.6.1.4.1.20301.2.7.21.12.3.9.1.3
fabricTrunkPeerAttachedSwNum
The attached switch number (asnum) of the switch to which
the fabric trunk is connected.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.9.1.4
fabricTrunkPeerID
The identifier of the fabric trunk to which this
fabric trunk is connected to.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.9.1.5

fabricPathTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.11 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fabricPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fabricPathTable' 
The table to specify the path (the fabric trunks) used by packets
going from a switch of the fabric to another switch of the #STACK_DESC_OPT#.
fabricPathEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.11.1
Information about the fabric trunk to use by a switch for the traffic
which should go to a particular switch of the fabric
Indexes
Column Syntax OID
fabricConfiguredSwNumFrom
The configured switch number (csnum) of the source switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.11.1.1
fabricConfiguredSwNumTo
The configured switch number (csnum) of the destination switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.11.1.2
fabricTrunkIDThrough
The identifier of a fabric trunk from the source switch that is used
to send the traffic to the destination switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.11.1.3

portNumberTable

table
.1.3.6.1.4.1.20301.2.7.21.12.3.12 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portNumberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::portNumberTable' 
The table to give the system port number used in the user interfaces
for a port specified by the configured switch number and the local
port number.
portNumberEntry row .1.3.6.1.4.1.20301.2.7.21.12.3.12.1
The mapping between the (switch number, local port number) and
user interface system port number.
Indexes
Column Syntax OID
configuredSwNum
The configured switch number (csnum) of the switch to which
the port belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.12.1.1
localPortNum
The local port number: the number assigned to the port with
respect to the switch to which it belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.3.12.1.2
sysPortNum
The system port number: the number assigned to the port with
respect to the whole fabric. This is the usual number used as index
in the port related tables.
PortNumber .1.3.6.1.4.1.20301.2.7.21.12.3.12.1.3
localPortAlias
The local port alias: the alias assigned to the port with
respect to the switch to which it belongs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.3.12.1.4

fabricBootCurTable

table
.1.3.6.1.4.1.20301.2.7.21.12.5.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fabricBootCurTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fabricBootCurTable' 
The table of currently booted fabric settings for the switches 
of the fabric.
fabricBootCurTableEntry row .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1
Currently booted fabric settings for a switch
of the fabric.
Indexes
Column Syntax OID
fabricBootCurSwitchNumber
The attached switch number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.1
fabricBootCurMode
The current (booted) fabric mode of the switch; when the switch
is standalone the notAvailable(1) value is always returned
Enumeration
Enumerated Values:
1notAvailable
2master
3member
 .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.2
fabricBootCurTrunkPorts
The current (booted) external ports (10G or higher) which form
the Fabric Trunk
The ports are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.3
fabricBootCurVlan
The current (booted) fabric VLAN number for control communication
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.4
fabricBootCurSIFabricDomain
Set the SI Fabric domain number
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.6

fabricBootSavedTable

table
.1.3.6.1.4.1.20301.2.7.21.12.5.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fabricBootSavedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fabricBootSavedTable' 
The table of the current fabric settings saved for the next reboot
(for all switches in the fabric) .
fabricBootSavedTableEntry row .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1
Current fabric settings saved for the next reboot for a switch
of the fabric.
Indexes
Column Syntax OID
fabricBootSavedSwitchNumber
The attached switch number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.1
fabricBootSavedMode
Set the fabric mode of the switch after the next reset
Enumerationr/w
Enumerated Values:
1master
2member
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.2
fabricBootSavedTrunkPortIndexAdd
When set, add an external port (10G or higher) to the Fabric Trunk;
when read, the value 0 is returned
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.3
fabricBootSavedTrunkPortIndexRem
When set, remove an external port (10G or higher) from the Fabric Trunk;
when read, the value 0 is returned
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.4
fabricBootSavedTrunkPorts
The external ports (10G or higher) which will form the Fabric Trunk
after the next reset of the switch
The ports are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx…
OctetString .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.5
fabricBootSavedVlan
The saved fabric VLAN number for control communication (it will become
effective after the next reset)
Integer32r/w
Constraints:
range: 2-4094
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.6
fabricBootSavedClear
When clear(1) is written, then the saved fabric parameters are set to the
factory default values; when read, other(2) is always returned
Enumerationr/w
Enumerated Values:
1clear
2other
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.7
fabricBootSavedSIFabricDomain
Set the SI Fabric domain number
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.9
fabricBootSavedTrunkPortAliasAdd
When set, add an external port alias (10G or higher) to the Fabric Trunk;
when read, the value 0 is returned
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.10
fabricBootSavedTrunkPortAliasRem
When set, remove an external port alias (10G or higher) from the Fabric Trunk;
when read, the value 0 is returned
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.11

fabricBootSwitchTable

table
.1.3.6.1.4.1.20301.2.7.21.12.5.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fabricBootSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fabricBootSwitchTable' 
The table for resetting the switches in the fabric. Contains only 
the entries for configured and attached switches, indexed by the 
configured switch number
fabricBootSwitchEntry row .1.3.6.1.4.1.20301.2.7.21.12.5.3.1
A row in the table for resetting the switches in the fabric
Indexes
Column Syntax OID
fabricBootSwitchNum
The configured switch number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.12.5.3.1.1
fabricBootSwitchReset
This is an action object to reboot the selected switch.
other(1) is returned always when read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.20301.2.7.21.12.5.3.1.2

etsCurCfgMcPGTable

table
.1.3.6.1.4.1.20301.2.7.21.13.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk etsCurCfgMcPGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::etsCurCfgMcPGTable' 
The table of Multicast Priority Allocation
etsCurCfgMcPGEntry row .1.3.6.1.4.1.20301.2.7.21.13.1.3.1
Information about Multicast Priority Allocation
Indexes
Column Syntax OID
etsCurCfgMcPrioId
The priority which is to be assigned to a multicast priority group
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.13.1.3.1.1
etsCurCfgMcPGId
Multicast priority group number
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.20301.2.7.21.13.1.3.1.2

etsNewCfgMcPGTable

table
.1.3.6.1.4.1.20301.2.7.21.13.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk etsNewCfgMcPGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::etsNewCfgMcPGTable' 
The table of Multicast Priority Allocation
etsNewCfgMcPGEntry row .1.3.6.1.4.1.20301.2.7.21.13.1.4.1
Information about Multicast Priority Allocation
Indexes
Column Syntax OID
etsNewCfgMcPrioId
The priority which is to be assigned to a multicast priority group
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.20301.2.7.21.13.1.4.1.1
etsNewCfgMcPGId
Multicast priority group Number
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.20301.2.7.21.13.1.4.1.2

etsCurCfgMcPgBwTable

table
.1.3.6.1.4.1.20301.2.7.21.13.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk etsCurCfgMcPgBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::etsCurCfgMcPgBwTable' 
The table of Multicast Bandwidth Allocation
etsCurCfgMcPgBwEntry row .1.3.6.1.4.1.20301.2.7.21.13.1.5.1
Information about Multicast Bandwidth Allocation
Indexes
Column Syntax OID
etsCurCfgMcPgBwId
The multicast priority group for which bandwidth is allocated in this table.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.20301.2.7.21.13.1.5.1.1
etsCurCfgMcPgBw
Multicast priority group's bandwidth
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.20301.2.7.21.13.1.5.1.2
etsCurCfgMcPgDesc
Multicast priority group's description
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.13.1.5.1.3

etsNewCfgMcPgBwTable

table
.1.3.6.1.4.1.20301.2.7.21.13.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk etsNewCfgMcPgBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::etsNewCfgMcPgBwTable' 
The table of Multicast Bandwidth Allocation
etsNewCfgMcPgBwEntry row .1.3.6.1.4.1.20301.2.7.21.13.1.6.1
Information about Multicast Bandwidth Allocation
Indexes
Column Syntax OID
etsNewCfgMcPgBwId
The multicast priority group for which bandwidth is allocated in this table.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.20301.2.7.21.13.1.6.1.1
etsNewCfgMcPgBw
Multicast priority group's bandwidth
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.20301.2.7.21.13.1.6.1.2
etsNewCfgMcPgDesc
Multicast priority group's description
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.13.1.6.1.3

fipsPortCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.14.1.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsPortCurCfgTable' 
The table of FIP Snooping port current config.
fipsPortCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1
FIP Config for a particular port.
Indexes
Column Syntax OID
fipsPortCurCfgIndex
The port number
PortNumber .1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.1
fipsPortCurCfgFcfMode
Weither the port is set to have FCF auto detection, on, or off.
Enumeration
Enumerated Values:
0auto
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.2
fipsPortCurCfgFipsEna
FIP snooping enabled or disabled on this port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.3

fipsPortNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.14.1.3.8 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsPortNewCfgTable' 
The table of FIP Snooping port new config.
fipsPortNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1
FIP Config for a particular port.
Indexes
Column Syntax OID
fipsPortNewCfgIndex
The port number
PortNumber .1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.1
fipsPortNewCfgFcfMode
Set this port to have FCF on, off, or auto detection.
Enumerationr/w
Enumerated Values:
0auto
1on
2off
 .1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.2
fipsPortNewCfgFipsEna
Enable or disable FIP snooping on this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.3

fcoeStatsTable

table
.1.3.6.1.4.1.20301.2.7.21.14.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fcoeStatsTable' 
The table of fcoe statistics per switch unit.
fcoeStatsEntry row .1.3.6.1.4.1.20301.2.7.21.14.2.1.1
A switch unit.
Indexes
Column Syntax OID
fcoeStatsIndex
The switch index for fips statistics
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.1.1.1
fcoeStatsFcfAdded
The number of FCF added to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.1.1.2
fcoeStatsFcfRemoved
The number of FCF removed to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.1.1.3
fcoeStatsFcoeAdded
The number of FCOE connection added to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.1.1.4
fcoeStatsFcoeRemoved
The number of FCOE connection removed to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.1.1.5

fcoeStatsKeepAliveTable

table
.1.3.6.1.4.1.20301.2.7.21.14.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsKeepAliveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fcoeStatsKeepAliveTable' 
The table of fcoe Keep-Alive statistics.
fcoeStatsKeepAliveEntry row .1.3.6.1.4.1.20301.2.7.21.14.2.2.1
A FCF Keep Alive entry.
Indexes
Column Syntax OID
fcoeStatsKeepAliveIndex
The FCF index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.2.1.1
fcoeStatsKeepAliveFcfMac
Detected FCF MAC address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.2.2.1.2
fcoeStatsKeepAliveCount
FCF MAC Keep Alive count.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.2.2.1.3

fipsInfoPortTable

table
.1.3.6.1.4.1.20301.2.7.21.14.3.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsInfoPortTable' 
The table of fips port run-time information.
fipsInfoPortEntry row .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1
A port in the fips information table.
Indexes
Column Syntax OID
fipsInfoPortIndex
The port index for fips
PortNumber .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.1
fipsInfoAclSequencer
The fip sequence number for an acl in this port
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.2
fipsInfoAcl
An FIPS ACL entry
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.3
fipsInfoPortAlias
The port alias for fips
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.4

fipsInfoFcfTable

table
.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsInfoFcfTable' 
The table of fips FCF detected.
fipsInfoFcfEntry row .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1
A FCF in the fips information table.
Indexes
Column Syntax OID
fipsInfoFcfIndex
FCF index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.1
fipsInfoFcfMac
FCF MAC
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.2
fipsInfoFcfPort
FCF Port/Trunk alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.3
fipsInfoFcfVlan
FCF Vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.4

fipsInfoFcoeTable

table
.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcoeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsInfoFcoeTable' 
The table of fips FCOE connections.
fipsInfoFcoeEntry row .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1
A FCOE connection in the fips information table.
Indexes
Column Syntax OID
fipsInfoFcoeIndex
FCOE connection index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.1
fipsInfoFcoeVNPortMac
FCOE connection VNPort MAC
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.2
fipsInfoFcoeFcfMac
FCOE connection FCF MAC
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.3
fipsInfoFcoePort
FCOE connection Port/Trunk Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.4
fipsInfoFcoeVlan
FCOE connection Vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.5

fipsInfoVlansTable

table
.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoVlansTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::fipsInfoVlansTable' 
The table of FCOE VLANs detected.
fipsInfoVlansEntry row .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1
A FCOE VLAN in the fipsInfoVlans information table.
Indexes
Column Syntax OID
fipsInfoVlansId
FCoE Vlan index
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.1
fipsInfoVlansFeatureIndex
FCoE Vlan feature index. The feature index will accept values
from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and
0 for the other types of VLANs.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.2
fipsInfoVlansCreator
The FCoE VLAN Creator.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.3
fipsInfoVlansPorts
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| |…
OctetString .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.4
fipsInfoVlansTrunks
The FCoE VLAN trunk list.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.5

vmCurCfgGroupTable

table
.1.3.6.1.4.1.20301.2.7.21.15.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmCurCfgGroupTable' 
The table of VM groups in the current config
vmCurCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.21.15.2.1.1
Information about VM on a group in current config.
Indexes
Column Syntax OID
vmCurCfgGroupIndex
The index of the vm group table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.1
vmCurCfgGroupVlan
Current Vlan used by the group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.2
vmCurCfgGroupPorts
The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.3
vmCurCfgGroupTagState
Enable VLAN tagging on all VM group ports.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.4
vmCurCfgGroupStg
Current stg of the group vlan.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.5
vmCurCfgGroupProfileName
Current profile name used by the group.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.17
vmCurCfgGroupValidateMode
Current validation mode used by the group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.18
vmCurCfgGroupVPorts
The vport list in the VM Group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.1.1.23

vmNewCfgGroupTable

table
.1.3.6.1.4.1.20301.2.7.21.15.2.2 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmNewCfgGroupTable' 
The table of VM groups in the new config
vmNewCfgGroupEntry row .1.3.6.1.4.1.20301.2.7.21.15.2.2.1
Information about VM on a group in new config.
Indexes
Column Syntax OID
vmNewCfgGroupIndex
The index of the vm group table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.1
vmNewCfgGroupVlan
Set Vlan to be used by the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.2
vmNewCfgGroupPorts
The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.3
vmNewCfgGroupAddVm
Add a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.4
vmNewCfgGroupRemVm
Remove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.5
vmNewCfgGroupAddVmIdx
Add virtual MAC address by index to the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.6
vmNewCfgGroupRemVmIdx
Remove a virtual MAC address by index from the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.7
vmNewCfgGroupAddPortIdx
Add a port to the group.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.8
vmNewCfgGroupRemPortIdx
Remove a port from the group.
PortNumberr/w .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.9
vmNewCfgGroupAddTrunk
Add trunk to the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.10
vmNewCfgGroupRemTrunk
Remove trunk from the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.11
vmNewCfgGroupTagState
Enable VLAN tagging on all VM group ports.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.12
vmNewCfgGroupAddLacpKey
Add LACP trunk to the group.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.13
vmNewCfgGroupRemLacpKey
Remove LACP trunk from the group.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.14
vmNewCfgGroupAddProfile
Add VM Profile to the group.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.15
vmNewCfgGroupRemProfile
Remove any VM profile associated with the group.
Enumerationr/w
Enumerated Values:
1remove
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.16
vmNewCfgGroupProfileName
New profile name to be used by the group.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.17
vmNewCfgGroupDelete
Delete VM Group.
Enumerationr/w
Enumerated Values:
1delete
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.18
vmNewCfgGroupStg
Set group vlan spanning tree group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.19
vmNewCfgGroupValidateMode
Set group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID.
Enumerationr/w
Enumerated Values:
0noValidation
1basicCheck
2advancedCheck
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.20
vmNewCfgGroupAddvPort
Add vPort in VMGroup
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.21
vmNewCfgGroupRemvPort
Remove vPort from VMGroup
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.22
vmNewCfgGroupVPorts
The vport list in the VM Group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.23
vmNewCfgGroupAddPortAlias
Add a port to the group, using it's alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.24
vmNewCfgGroupRemPortAlias
Remove a port from the group, using it's alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.2.2.1.25

vmCurCfgGroupMacTable

table
.1.3.6.1.4.1.20301.2.7.21.15.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmCurCfgGroupMacTable' 
Virtual machine group current configuration table.
vmCurCfgGroupMaclistEntry row .1.3.6.1.4.1.20301.2.7.21.15.2.3.1
Information about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index
Indexes
Column Syntax OID
vmCurCfgGroupMacGroupIndex
The group number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.2.3.1.1
vmCurCfgGroupMacVMIndex
The virtual machine number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.2.3.1.2
vmCurCfgGroupMacVMMac
virtual machine MAC address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.15.2.3.1.3

vmNewCfgGroupMacTable

table
.1.3.6.1.4.1.20301.2.7.21.15.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmNewCfgGroupMacTable' 
virtual machine group new configuration table.
vmNewCfgGroupMaclistEntry row .1.3.6.1.4.1.20301.2.7.21.15.2.4.1
Information about virtual machine group
Indexes
Column Syntax OID
vmNewCfgGroupMacGroupIndex
The group number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.2.4.1.1
vmNewCfgGroupMacVMIndex
The virtual machine number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.2.4.1.2
vmNewCfgGroupMacVMMac
The virtual machine MAC address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.15.2.4.1.3

vmbwCurCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.15.3.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmbwCurCfgTable' 
The table of current VM Bandwidth configuration.
vmbwCurCfgEntry row .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1
A row in the current VM bandwidth table.
Indexes
Column Syntax OID
vmbwCurCfgMac
MAC address of VM for which bandwidth control information is related.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.1
vmbwCurCfgTxRate
VM transmit bandwidth committed rate in kbps (ingress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.2
vmbwCurCfgTxBurst
VM transmit bandwidth max burst size in kilobits (ingress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.3
vmbwCurCfgTxAclId
ACL used for VM transmit bandwidth.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.4
vmbwCurCfgRxRate
VM receive bandwidth committed rate in kbps (egress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.5
vmbwCurCfgRxBurst
VM receive bandwidth max burst size in kilobits (egress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.6
vmbwCurCfgCtrl
Enable/Disable VM bandwidth control entry.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.7

vmbwNewCfgTable

table
.1.3.6.1.4.1.20301.2.7.21.15.3.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmbwNewCfgTable' 
The table of new VM Bandwidth configuration.
vmbwNewCfgEntry row .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1
A row in the new VM bandwidth table.
Indexes
Column Syntax OID
vmbwNewCfgMac
MAC address of VM for which bandwidth control information is related.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.1
vmbwNewCfgTxRate
VM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.2
vmbwNewCfgTxBurst
VM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.3
vmbwNewCfgTxAclId
ACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.4
vmbwNewCfgRxRate
VM receive bandwidth committed rate in kbps (egress for switch).
Set this to zero to disable receive bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.5
vmbwNewCfgRxBurst
VM receive bandwidth max burst size in kilobits (egress for switch).
Set this to zero to disable receive bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.6
vmbwNewCfgCtrl
VM bandwidth control entry status
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.7
vmbwNewCfgDelete
This is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2).
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.8

vmCurCfgProfilesTable

table
.1.3.6.1.4.1.20301.2.7.21.15.4.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmCurCfgProfilesTable' 
The table of VM profiles in the current config
vmCurCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.21.15.4.1.1
Information about a VM profile in current config.
Indexes
Column Syntax OID
vmCurCfgProfileIndex
The index of the vm profiles table (1..32).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.1
vmCurCfgProfileName
VM Profile name.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.2
vmCurCfgProfileVlan
Current VM Profile VLAN Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.3
vmCurCfgProfileShapingAverage
Current VM Profile Shaping Average.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.4
vmCurCfgProfileShapingBurst
Current VM Profile Shaping Burst.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.5
vmCurCfgProfileShapingPeak
Current VM Profile Shaping Peak.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.6
vmCurCfgProfileEgressShapingAverage
Current VM Profile Egress Shaping Average.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.7
vmCurCfgProfileEgressShapingBurst
Current VM Profile Egress Shaping Burst.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.8
vmCurCfgProfileEgressShapingPeak
Current VM Profile Egress Shaping Peak.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.1.1.9

vmNewCfgProfilesTable

table
.1.3.6.1.4.1.20301.2.7.21.15.4.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmNewCfgProfilesTable' 
The table of VM profiles in the current config
vmNewCfgProfileEntry row .1.3.6.1.4.1.20301.2.7.21.15.4.2.1
Information about a VM profile in current config.
Indexes
Column Syntax OID
vmNewCfgProfileIndex
The index of the vm profiles table (1..32).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.1
vmNewCfgProfileName
VM Profile name.
OctetStringr/w
Constraints:
range: 1-39
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.2
vmNewCfgProfileVlan
Vlan to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.3
vmNewCfgProfileShapingAverage
Shaping average to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.4
vmNewCfgProfileShapingBurst
Shaping burst to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.5
vmNewCfgProfileShapingPeak
Shaping peak to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.6
vmNewCfgProfileDelete
Delete VM Profile.
Enumerationr/w
Enumerated Values:
1none
2delete
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.7
vmNewCfgProfileEgressShapingAverage
Egress shaping average to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.8
vmNewCfgProfileEgressShapingBurst
Egress shaping burst to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.9
vmNewCfgProfileEgressShapingPeak
Egress shaping peak to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.4.2.1.10

virtVMwareHostNameTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareHostNameTable' 
The table of names of VMware hosts in the Virtual Center.
virtVMwareHostNameEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.2.1
Information about names of VMware hosts in the Data Center.
Indexes
Column Syntax OID
virtVMwareHostNameIndex
The index of the virtVMwareHostNameTable table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.2.1.1
virtVMwareHostNameUUID
The UUID of a VMware host.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.2.1.2
virtVMwareHostNameIpAddress
The IP address of a VMware host.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.2.1.3
virtVMwareHostNameName
The name of a VMware host.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.2.1.4

virtVMwareVMNameTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareVMNameTable' 
The table of VMware virtual machines in the Data Center.
virtVMwareVMNameEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.3.1
Information about VMware virtual machines in the Data Center.
Indexes
Column Syntax OID
virtVMwareVMNameIndex
The index of the VMware virtual machine table in the Data Center.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.3.1.1
virtVMwareVMNameUUID
The UUID of a virtual machine.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.3.1.2
virtVMwareVMNameVMwareName
The name of a virtual machine given by VMware.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.3.1.3
virtVMwareVMNameOsName
The name of a virtual machine given by the host OS.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.3.1.4
virtVMwareVMNameIpAddress
The IP address of a virtual machine.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.20301.2.7.21.15.5.3.1.5

virtVMwareHostVswitchTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostVswitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareHostVswitchTable' 
The table of Vswitches available on the specified host.
virtVMwareHostVswitchEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.5.1
Information about Vswitches available on the specified host.
Indexes
Column Syntax OID
virtVMwareHostVswitchIndex
The index of the Vswitch table on the specified host.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.5.1.1
virtVMwareHostVswitchName
The name of a Vswitch on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.5.1.2

virtVMwareHostPGTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.6 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostPGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareHostPGTable' 
The table of Port Groups available on the specified host.
virtVMwareHostPGEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.6.1
Information about Port Groups available on the specified host.
Indexes
Column Syntax OID
virtVMwareHostPGIndex
The index of the Port Group table on the specified host.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.6.1.1
virtVMwareHostPGName
The name of a Port Group on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.6.1.2
virtVMwareHostPGVswitchName
The name of a Vswitch on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.6.1.3

virtVMwareHostDetailInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.7 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostDetailInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareHostDetailInfoTable' 
The table of detailed information available on the specified 
host/VM interface.
virtVMwareHostDetailInfoEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.7.1
Detailed information available on the specified host/VM interface.
Indexes
Column Syntax OID
virtVMwareHostDetailInfoIndex
The index of the detailed information table on the specified
host/VM interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.1
virtVMwareHostDetailInfoMACAddr
The MAC address of the host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.2
virtVMwareHostDetailInfoPortIdx
The port number of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.3
virtVMwareHostDetailInfoType
Interface type
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.4
virtVMwareHostDetailInfoIPAddr
The IP address of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.5
virtVMwareHostDetailInfoUUID
The UUID of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.6
virtVMwareHostDetailInfoVswitch
The name of the virtual switch of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.7
virtVMwareHostDetailInfoPortGroup
The name of the port group of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.8
virtVMwareHostDetailInfoVlanID
The VLAN ID of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.9
virtVMwareHostDetailInfoHostName
The name of the specified host interface.
N/A for VMs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.10
virtVMwareHostDetailInfoVMVCenterName
The name of the Virtual Center of the specified VM interface.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.11
virtVMwareHostDetailInfoVMOSHostName
The name of the VM set by the host operating system.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.12
virtVMwareHostDetailInfoVMCurrentHost
The name of the host of the specified VM.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.13
virtVMwareHostDetailInfoPortAlias
The port alias of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.7.1.14

virtVMwareVMInfoTable

table
.1.3.6.1.4.1.20301.2.7.21.15.5.9 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::virtVMwareVMInfoTable' 
The table of networking information available on the 
specified VM.
virtVMwareVMInfoEntry row .1.3.6.1.4.1.20301.2.7.21.15.5.9.1
Detailed information available on the specified VM.
Indexes
Column Syntax OID
virtVMwareVMInfoIndex
The index of the table with information on the
specified VM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.1
virtVMwareVMInfoMACAddr
The MAC address of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.2
virtVMwareVMInfoPortAlias
The port alias of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.3
virtVMwareVMInfoType
Interface type
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.4
virtVMwareVMInfoIPAddr
The IP address of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.5
virtVMwareVMInfoUUID
The UUID of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.6
virtVMwareVMInfoVswitch
The name of the virtual switch of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.7
virtVMwareVMInfoPortGroup
The name of the port group of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.8
virtVMwareVMInfoVlanID
The VLAN ID of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.9
virtVMwareVMInfoVMVCenterName
The name of the Virtual Center of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.10
virtVMwareVMInfoVMOSHostName
The name of the VM set by the host operating system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.11
virtVMwareVMInfoVMCurrentHost
The name of the host of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.12
virtVMwareVMInfoPortIdx
The port number of the specified VM.
PortNumber .1.3.6.1.4.1.20301.2.7.21.15.5.9.1.13

vmReadyCurCfgOuiTbl

table
.1.3.6.1.4.1.20301.2.7.21.15.8.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyCurCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmReadyCurCfgOuiTbl' 
The table of current VM Ready OUI configuration.
vmReadyCurCfgOuiEntry row .1.3.6.1.4.1.20301.2.7.21.15.8.2.1
A row in the current VM Ready OUI table.
Indexes
Column Syntax OID
vmReadyCurCfgOuiMacIdx
OUI of locally administred MAC address
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.8.2.1.1
vmReadyCurCfgOuiMac
OUI of locally administred MAC address
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.2.7.21.15.8.2.1.2
vmReadyCurCfgVendor
Vendor name of the OUI locally administred
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.8.2.1.3

vmReadyNewCfgOuiTbl

table
.1.3.6.1.4.1.20301.2.7.21.15.8.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyNewCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::vmReadyNewCfgOuiTbl' 
The table of new VM Ready OUI configuration.
vmReadyNewCfgOuiEntry row .1.3.6.1.4.1.20301.2.7.21.15.8.3.1
A row in the new VM Ready OUI table.
Indexes
Column Syntax OID
vmReadyNewCfgOuiMacIdx
OUI of locally administred MAC address
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20301.2.7.21.15.8.3.1.1
vmReadyNewCfgOuiMac
New OUI of locally administred MAC address
Format xx:yy:zz
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.8.3.1.2
vmReadyNewCfgVendor
Vendor name of the OUI locally administred
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.15.8.3.1.3
vmReadyNewCfgDelete
If set the OUI of the locally administred MAC would be deleted
Enumerationr/w
Enumerated Values:
0other
1delete
 .1.3.6.1.4.1.20301.2.7.21.15.8.3.1.4

ufpCurCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.17.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpCurCfgPortTable' 
The table of UFP ports
ufpCurCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.1.5.1
A port in the ufpCurCfgPortTable
Indexes
Column Syntax OID
ufpCurCfgPortIndex
Port index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.1.5.1.1
ufpCurCfgPortState
UFP port state
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.5.1.2
ufpCurCfgPortQosMode
UFP port QoS Mode
Enumeration
Enumerated Values:
1bw
2ets
 .1.3.6.1.4.1.20301.2.7.21.17.1.5.1.4

ufpNewCfgPortTable

table
.1.3.6.1.4.1.20301.2.7.21.17.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpNewCfgPortTable' 
The table of UFP ports
ufpNewCfgPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.1.6.1
A port in the ufpNewCfgPortTable
Indexes
Column Syntax OID
ufpNewCfgPortIndex
Port index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.1.6.1.1
ufpNewCfgPortState
UFP port state
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.6.1.2
ufpNewCfgPortDelete
Delete UFP port
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.17.1.6.1.4
ufpNewCfgPortQosMode
UFP port QoS Mode
Enumerationr/w
Enumerated Values:
1bw
2ets
 .1.3.6.1.4.1.20301.2.7.21.17.1.6.1.5

ufpCurCfgVportTable

table
.1.3.6.1.4.1.20301.2.7.21.17.1.7 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpCurCfgVportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpCurCfgVportTable' 
Table of UFP virtual ports
ufpCurCfgVportTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.1.7.1
A vPort in the ufpCurCfgVportTable
Indexes
Column Syntax OID
ufpCurCfgVportPortIndex
The port number of the vPort
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.1
ufpCurCfgVportIndex
The vport number of the vPort
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.2
ufpCurCfgVportState
The vPort state
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.3
ufpCurCfgVportNetworkMode
The vPort network mode
Enumeration
Enumerated Values:
1access
2trunk
3auto
4tunnel
5fcoe
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.4
ufpCurCfgVportNetworkDefVlan
The vPort network default VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.5
ufpCurCfgVportNetworkDefTag
The vPort network default tag
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.6
ufpCurCfgVportQosBwMin
The vPort QoS minimum guaranteed bandwidth
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.7
ufpCurCfgVportQosBwMax
The vPort QoS maximum allowed bandwidth
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.8
ufpCurCfgVportQosEtsPrio
The vPort Ets system class priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.9
ufpCurCfgVportQosHostCtrl
The vPort host COS control
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.10
ufpCurCfgVportPrivateVlan
The vPort network Private VLAN mode
Enumeration
Enumerated Values:
1disabled
2trunk
3host
4promiscuous
 .1.3.6.1.4.1.20301.2.7.21.17.1.7.1.12

ufpNewCfgVportTable

table
.1.3.6.1.4.1.20301.2.7.21.17.1.8 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpNewCfgVportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpNewCfgVportTable' 
Table of UFP virtual ports
ufpNewCfgVportTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.1.8.1
A vPort in the ufpNewCfgVportTable
Indexes
Column Syntax OID
ufpNewCfgVportPortIndex
The port number of the vPort
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.1
ufpNewCfgVportIndex
The vport number of the vPort
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.2
ufpNewCfgVportState
The vPort state
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.3
ufpNewCfgVportNetworkMode
The vPort network mode
Enumerationr/w
Enumerated Values:
1access
2trunk
3auto
4tunnel
5fcoe
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.4
ufpNewCfgVportNetworkDefVlan
The vPort network default VLAN
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.5
ufpNewCfgVportNetworkDefTag
The vPort network default tag
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.6
ufpNewCfgVportQosBwMin
The vPort QoS minimum guaranteed bandwidth
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.7
ufpNewCfgVportQosBwMax
The vPort QoS maximum allowed bandwidth
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.8
ufpNewCfgVportQosEtsPrio
The vPort Ets system class priority
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.9
ufpNewCfgVportQosHostCtrl
The vPort host COS control
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.10
ufpNewCfgVportDelete
Delete vPort
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.11
ufpNewCfgVportPrivateVlan
The vPort network Private VLAN mode
Enumerationr/w
Enumerated Values:
1disabled
2trunk
3host
4promiscuous
 .1.3.6.1.4.1.20301.2.7.21.17.1.8.1.13

ufpInfoCdcpTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoCdcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoCdcpTable' 
The table of CDCP information per port
ufpInfoCdcpTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.1.1
A port in the ufpInfoCdcpTable
Indexes
Column Syntax OID
ufpInfoCdcpPortIndex
Port Index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.2.1.1.1
ufpInfoCdcpPortStatus
Cdcp port status
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.1.1.2

ufpInfoPortTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoPortTable' 
The table of UFP port information
ufpInfoPortTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.2.1
A port in the ufpInfoPortTable
Indexes
Column Syntax OID
ufpInfoPortIndex
Port index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.1
ufpInfoPortState
Port state information
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.2
ufpInfoPortVports
Vports information
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.3
ufpInfoPortChan1
Chan 1 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.4
ufpInfoPortChan2
Chan 2 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.5
ufpInfoPortChan3
Chan 3 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.6
ufpInfoPortChan4
Chan 4 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.7
ufpInfoPortChan5
Chan 5 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.8
ufpInfoPortChan6
Chan 6 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.9
ufpInfoPortChan7
Chan 7 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.10
ufpInfoPortChan8
Chan 8 state
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.2.1.11

ufpInfoQosTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoQosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoQosTable' 
The table of Qos information per port
ufpInfoQosTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.3.1
A port in the ufpInfoQosTable
Indexes
Column Syntax OID
ufpInfoQosPortIndex
Port index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.1
ufpInfoQosVportIndex
Vport index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.2
ufpInfoQosMinBw
Minimum bandwidth per vport
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.3
ufpInfoQosMaxBw
Maximum bandwidth per vport
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.4
ufpInfoQosEtsPrio
Prority group assigned to vport
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.5
ufpInfoQosEtsHostCtrl
The vPort host COS control
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.6
ufpInfoQosModeRev
UFP port QOS Mode
Enumeration
Enumerated Values:
0bw
1ets
 .1.3.6.1.4.1.20301.2.7.21.17.2.3.1.7

ufpInfoTlvstatTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoTlvstatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoTlvstatTable' 
The table of TLV information per port
ufpInfoTlvstatTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.4.1
A port in the ufpInfoTlvstatTable
Indexes
Column Syntax OID
ufpInfoTlvstatPortIndex
Port Index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.2.4.1.1
ufpInfoTlvstatPortStatus
TLV port status
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.4.1.2

ufpInfoVlanTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.5 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoVlanTable' 
The table of VLAN information
ufpInfoVlanTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.5.1
A VLAN in the ufpInfoVlanTable
Indexes
Column Syntax OID
ufpInfoVlanIndex
VLAN Index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.1
ufpInfoVlanVportList
Virtual ports list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.2
ufpInfoVlanExtPortList
External ports list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.3
ufpInfoVlanIntPortList
Internal ports list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.4
ufpInfoVlanUfpPortList
UFP ports list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.5
ufpInfoVlanVmrPortList
VMReady ports list
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.5.1.6

ufpInfoVportTable

table
.1.3.6.1.4.1.20301.2.7.21.17.2.6 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ufpInfoVportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ufpInfoVportTable' 
The table of vPort information
ufpInfoVportTableEntry row .1.3.6.1.4.1.20301.2.7.21.17.2.6.1
A vport in the ufpInfoVportTable
Indexes
Column Syntax OID
ufpInfoVportPortIndex
Port Index
PortNumber .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.1
ufpInfoVportIndex
vPort Index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.2
ufpInfoVportState
vPort State
Enumeration
Enumerated Values:
1disabled
2up
3down
4mismatch
5detached
6downbyteaming
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.3
ufpInfoVportMode
vPort Mode
Enumeration
Enumerated Values:
1access
2trunk
3auto
4tunnel
5fcoe
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.4
ufpInfoVportSvid
vPort Svid
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.5
ufpInfoVportDefaultVlan
vPort Default VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.6
ufpInfoVportDefaultTag
vPort Default Tag
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.7
ufpInfoVportVlans
vPort VLANs
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.2.7.21.17.2.6.1.8

ifMainTable

table
.1.3.6.1.4.1.20301.100.27.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ifMainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ifMainTable' 
A list of all the interface entries in the system. 
This table contains objects which are applicable to all
types of interfaces in the system. This table is a 
proprietary extension to the standard ifTable and 
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex.
ifMainEntry row .1.3.6.1.4.1.20301.100.27.1.4.1
An entry containing management information applicable
to a particular interface.
Indexes
Column Syntax OID
ifMainIndex
A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.20301.100.27.1.4.1.1
ifMainPortName
This is used to assign a alias to a port
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.100.27.1.4.1.9

ibmnosPortCtrlTable

table
.1.3.6.1.4.1.20301.100.81.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ibmnosPortCtrlTable' 
A table to control the port specific parameters of the device like speed,
duplex mode, etc.
ibmnosPortCtrlEntry row .1.3.6.1.4.1.20301.100.81.2.2.1
An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.
Indexes
Column Syntax OID
ibmnosPortCtrlIndex
Interface index of the port for which the configuration
in this entry applies.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.20301.100.81.2.2.1.1
ibmnosPortCtrlMode
Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.

If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link …
Enumerationr/w
Enumerated Values:
1auto
2noNegotiation
 .1.3.6.1.4.1.20301.100.81.2.2.1.2
ibmnosPortCtrlDuplex
Configures interface data transfer mode as full-duplex or half-duplex.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value '…
Enumerationr/w
Enumerated Values:
1full
2half
3any
 .1.3.6.1.4.1.20301.100.81.2.2.1.3
ibmnosPortCtrlSpeed
Configures interface speed.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'
Enumerationr/w
Enumerated Values:
1tenMBPS
2hundredMBPS
3oneGB
4tenGB
5any
 .1.3.6.1.4.1.20301.100.81.2.2.1.4
ibmnosPortCtrlFlowControl
Enables / disables flow control for the interface.

This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negot…
Enumerationr/w
Enumerated Values:
1enable
2disable
3send
4receive
 .1.3.6.1.4.1.20301.100.81.2.2.1.5
ibmnosPortCtrlAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20301.100.81.2.2.1.10

ibmnosPortCfgTable

table
.1.3.6.1.4.1.20301.100.100.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ibmnosPortCfgTable' 
The table of port configuration in the new_configuration block.
ibmnosPortCfgTableEntry row .1.3.6.1.4.1.20301.100.100.2.1.1
A row in the port configuration table in the new_configuration block.
Indexes
Column Syntax OID
ibmnosPortCfgIndx
The index of the row in port configurations table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.2.1.1.1
ibmnosPortCfgVlanTag
VLAN tag configured for the port
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.20301.100.100.2.1.1.2

ibmnosFdbTable

table
.1.3.6.1.4.1.20301.100.100.13.5 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ibmnosFdbTable' 
The table of FDB entries.
ibmnosFdbEntry row .1.3.6.1.4.1.20301.100.100.13.5.1
A row in the FDB table
Indexes
Column Syntax OID
ibmnosFdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.13.5.1.1
ibmnosFdbMacAddr
The MAC address for the FDB entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.20301.100.100.13.5.1.2
ibmnosFdbMacAddrStr
The MAC address in hex format for the FDB entry. This node is added for
display purpose.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.20301.100.100.13.5.1.3
ibmnosFdbVlanId
The VLAN ID for the FDB entry. This node is added for display purpose.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.13.5.1.4
ibmnosFdbSrcPort
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been l…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.13.5.1.5
ibmnosFdbSrcTrunk
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.13.5.1.6
ibmnosFdbState
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2forward
3trunk
 .1.3.6.1.4.1.20301.100.100.13.5.1.7
ibmnosFdbStatus
'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.13.5.1.10
ibmnosFdbClearMac
Setting this value to clear(2) clears the corresponding table entry in FDB.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.20301.100.100.13.5.1.11

hardwareTable

table
.1.3.6.1.4.1.20301.100.100.14.1 · 1 row entry · 21 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hardwareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::hardwareTable' 
The table with the hardware information for the switches in the fabric.
hardwareTableEntry row .1.3.6.1.4.1.20301.100.100.14.1.1
Hardware related information for a switch in the fabric.
Indexes
Column Syntax OID
hardwareSwitchNumber
The number of the attached switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.14.1.1.1
hardwareSwitchRunningSwVersion
The switch software version.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.2
hwTemperatureSensor1
The temperature sensor 1.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.3
hwTemperatureSensor2
The temperature sensor 2.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.4
hwTemperatureSensor3
The temperature sensor 3.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.5
hwTemperatureSensor4
The temperature sensor 4.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.6
hwTemperatureSensor5
The temperature sensor 5.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.7
hwTemperatureSensor6
The temperature sensor 6.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.8
hwFan1RPMValue
The Fan 1 RPM value.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.14
hwFan2RPMValue
The Fan 2 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.15
hwFan3RPMValue
The Fan 3 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.16
hwFan4RPMValue
The Fan 4 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.17
hwFan5RPMValue
The Fan 5 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.18
hwFan6RPMValue
The Fan 6 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.19
hwFan7RPMValue
The Fan 7 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.20
hwFan8RPMValue
The Fan 8 RPM value.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.20301.100.100.14.1.1.21
hwPowerSupply1State
The Power Supply 1 state.
Enumeration
Enumerated Values:
0off
1on
2absent
 .1.3.6.1.4.1.20301.100.100.14.1.1.22
hwPowerSupply2State
The Power Supply 2 state.
Enumeration
Enumerated Values:
0off
1on
2absent
 .1.3.6.1.4.1.20301.100.100.14.1.1.23
swImage1Version
Software image1 version
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.24
swImage2Version
Software image2 version
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.25
swBootVersion
Software boot version
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.1.1.26

ibmnosSfpInfoTable

table
.1.3.6.1.4.1.20301.100.100.14.22 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosSfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-G8264CS-SIF-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-G8264CS-SIF-MIB::ibmnosSfpInfoTable' 
The table of external port SFP information.
ibmnosSfpInfoTableEntry row .1.3.6.1.4.1.20301.100.100.14.22.1
A row in the external port SFP information table.
Indexes
Column Syntax OID
ibmnosSfpInfoIndx
Sfp Info index (port number)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.20301.100.100.14.22.1.1
ibmnosSfpInfoDescription
Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))
Enumeration
Enumerated Values:
0none
1sfp
2cx4
3sfpplus
6dac
 .1.3.6.1.4.1.20301.100.100.14.22.1.2
ibmnosSfpInfoSerialNumber
Serial Number.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.22.1.3
ibmnosSfpInfoPartNumber
Part Number.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.22.1.4
ibmnosSfpInfoHWRevision
Hardware Revision
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.20301.100.100.14.22.1.5