LENOVO-GbTOR-10G-L2L3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
343
Rows
343
Columns
3,024

agCurCfgTrapHostTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.1.184 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agCurCfgTrapHostTable' 
The table of current trap hosts configure.
agCurCfgTrapHostEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.1.184.1
A trap host configuration on the switch.
Indexes
No indexes recorded
Column Syntax OID
agCurCfgTrapHostIndex
The trap host index. Valid range is 1-16
SNMPv2-SMIInteger32
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.184.1.1
agCurCfgTrapHostAddress
The trap host address.
SNMPv2-TCDisplayString
Enumerated Values:
1auto
2p2p
3shared
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.184.1.2
agCurCfgTrapHostCommStr
The trap host community string.
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.184.1.3

agNewCfgTrapHostTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.1.185 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agNewCfgTrapHostTable' 
The table for trap host definitions in the new configuration block.
agNewCfgTrapHostEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.1.185.1
A row in the trap host definition table
Indexes
No indexes recorded
Column Syntax OID
agNewCfgTrapHostIndex
The trap host index. Valid range is 1-16
SNMPv2-SMIInteger32
Enumerated Values:
1normal
2aggressive
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.185.1.1
agNewCfgTrapHostAddress
The trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.185.1.2
agNewCfgTrapHostCommStr
The trap host community string in the new configuration block.
OctetStringr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.185.1.3
agNewCfgTrapHostDelete
By setting the value to delete(2), the entire row is deleted.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.1.185.1.4

agPortCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.2.2 · 1 row entry · 32 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agPortCurCfgTable' 
The table of port configuration in the current configuration block.
agPortCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1
A row in the port table in the current configuration block.
Indexes
No indexes recorded
Column Syntax OID
agPortCurCfgIndx
The index of the row in port configurations table.
PortNumber
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.1
agPortCurCfgState
This is the state of the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.2
agPortCurCfgVlanTag
This is VLAN tag state of the port
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.3
agPortCurCfgRmon
This object is used to turn RMON on or off on the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.5
agPortCurCfgPVID
The default VLAN ID for the port.
SNMPv2-SMIInteger32
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.6
agPortCurCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
0default
1loop
2root
3none
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.12
agPortCurCfgPortName
The switch port name.
OctetString
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.13
agPortCurCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.16
agPortCurCfgDscpRemarking
Enable or disable Dscp remarking for the switch port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.23
agPortCurCfgPortAlias
The switch port alias.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.24
agPortCurCfgTagPVID
This is PVID tag state of the port
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.25
agPortCurCfgLearning
Enable or disable L2 (FDB) Learning for the switch port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.26
agPortCurCfgFloodBlocking
Enable or disable flood blocking for the switch port.
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.27
agPortCurCfgType
The switch port type.
OctetString
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.29
agPortCurCfgLinkType
The type of port connection. (for PVRST only)
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.30
agPortCurCfgEdge
The state of port edge.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.31
agPortCurCfgErrDisableRecovery
This object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has el…
Enumeration
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.35
agPortCurCfgUdld
Enable or disable UDLD for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.37
agPortCurCfgUdldMode
Enable or disable UDLD mode for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.38
agPortCurCfgOam
Enable or disable OAM Discovery process for the switch port.
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.39
agPortCurCfgOamMode
Enable or disable OAM mode for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.40
agPortCurCfgBpduGuard
Enable or disable BPDU guard for the switch port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.41
agPortCurCfgMulticastThreshold
Current status of the port's Multicast Threshold.
Enumeration
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.42
agPortCurCfgMulticastThresholdRate
Current port's Multicast Threshold Rate.
SNMPv2-SMIInteger32
Enumerated Values:
1auto
2p2p
3shared
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.43
agPortCurCfgBroadcastThreshold
Current status of the port's Broadcast Threshold.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.44
agPortCurCfgBroadcastThresholdRate
Current port's Broadcast Threshold Rate.
SNMPv2-SMIInteger32
Enumerated Values:
1enable
2disable
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.45
agPortCurCfgDLFThreshold
Current status of the port's Destination Lookup Fail Threshold.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.46
agPortCurCfgDLFThresholdRate
Current port's Destination Lookup Fail Threshold Rate.
SNMPv2-SMIInteger32
Enumerated Values:
1normal
2aggressive
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.47
agPortCurCfgMacAddrNotif
This is the state of the MAC address notification
syslog messages on the port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.48
agPortCurCfgStpExtGuard
Current state for spanning tree guard type
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.52
agPortCurCfgLFDStatus
This object indicates whether the system will put this port
in an error-disabled state due to excessive link flaps.

A port will be put in an error-disabled state due to
excessive link flaps if this objec…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.53
agPortCurCfgSpeed1G
Limit the port to 1G speed
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.2.1.69

agPortNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.2.3 · 1 row entry · 32 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agPortNewCfgTable' 
The table of port configuration in the new configuration block.
agPortNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1
A row in the port configuration table in the new configuration block.
Indexes
No indexes recorded
Column Syntax OID
agPortNewCfgIndx
The index of the row in port configurations table.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.1
agPortNewCfgState
This is the state of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.2
agPortNewCfgVlanTag
This is VLAN tag state of the port
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.3
agPortNewCfgRmon
This object is used to turn RMON on or off on the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.5
agPortNewCfgPVID
The default VLAN ID for the port.
SNMPv2-SMIInteger32r/w
Enumerated Values:
0default
1loop
2root
3none
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.6
agPortNewCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.12
agPortNewCfgPortName
The switch port name.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.13
agPortNewCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.16
agPortNewCfgDscpRemarking
Enable or disable Dscp remarking for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.23
agPortNewCfgTagPVID
This is PVID tag state of the port
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.25
agPortNewCfgLearning
Enable or disable L2 (FDB) Learning for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.26
agPortNewCfgFloodBlocking
Enable or disable flood blocking for the switch port.
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.27
agPortNewCfgType
The switch port type.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.29
agPortNewCfgLinkType
The type of port connection. (for PVRST only)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.30
agPortNewCfgEdge
The state of port edge.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.31
agPortNewCfgErrDisableRecovery
This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.35
agPortNewCfgUdld
Enable or disable UDLD for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.37
agPortNewCfgUdldMode
Enable or disable UDLD mode for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.38
agPortNewCfgOam
Enable or disable OAM Discovery process for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.39
agPortNewCfgOamMode
Enable or disable OAM mode for the switch port.
Enumerationr/w
Enumerated Values:
0none
1user
2oper
3admin
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.40
agPortNewCfgBpduGuard
Enable or disable BPDU guard for the switch port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.41
agPortNewCfgMulticastThreshold
New status of the port's Multicast Threshold.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.42
agPortNewCfgMulticastThresholdRate
New port's Multicast Threshold Rate.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.43
agPortNewCfgBroadcastThreshold
New status of the port's Broadcast Threshold.
Enumerationr/w
Enumerated Values:
0none
1user
2oper
3admin
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.44
agPortNewCfgBroadcastThresholdRate
New port's Broadcast Threshold Rate.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.45
agPortNewCfgDLFThreshold
New status of the port's Destination Lookup Fail Threshold.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.46
agPortNewCfgDLFThresholdRate
New port's Destination Lookup Fail Threshold Rate.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.47
agPortNewCfgMacAddrNotif
Enables or Disables the MAC address notification
syslog messages on the port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.48
agPortNewCfgStpExtGuard
Set spanning tree guard type
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.52
agPortNewCfgLFDStatus
This object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
Dampening error-disable action.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.53
agPortNewCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.68
agPortNewCfgSpeed1G
Limit the port to 1G speed
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.69

agSyslogMsgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.5.11 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agSyslogMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agSyslogMsgTable' 
The table of syslog messages.
agSyslogMsgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.5.11.1
A syslog message stored on the switch.
Indexes
No indexes recorded
Column Syntax OID
agSyslogMsgIndex
The syslog message table index.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.5.11.1.1
agSyslogMessage
The syslog message.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.5.11.1.2

agApplyTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.8.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agApplyTable' 
The table of failure reasons for an apply of current
configuration block changes.
agApplyTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.8.5.1
A row in the table of failure reasons for an apply
(information about a particular reason of failure).
Indexes
No indexes recorded
Column Syntax OID
agApplyIndex
The table index.
SNMPv2-SMIInteger32
Enumerated Values:
0user
3oper
6admin
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.8.5.1.1
agApplyString
A string in the apply table.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.1.1.8.5.1.2

agTacacsUserMapCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.11.39 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agTacacsUserMapCurCfgTable' 
The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.11.39.1
A row in the tacacs+ user mapping table.
Indexes
No indexes recorded
Column Syntax OID
agTacacsUserMapCurCfgUId
The current config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.11.39.1.1
agTacacsUserMapCurCfgMapping
Current Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.11.39.1.2

agTacacsUserMapNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.11.40 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agTacacsUserMapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agTacacsUserMapNewCfgTable' 
The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.11.40.1
A row in the tacacs+ user mapping table.
Indexes
No indexes recorded
Column Syntax OID
agTacacsUserMapNewCfgUId
The new config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.1.1.11.40.1.1
agTacacsUserMapNewCfgMapping
Set new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.1.1.11.40.1.2

agCurCfgMgmtNetTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.12.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCurCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agCurCfgMgmtNetTable' 
The table for Management Network definitions
in the current configuration block.
agCurCfgMgmtNetEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.12.2.1
A row in the management network definition table.
Indexes
No indexes recorded
Column Syntax OID
agCurCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.2.1.1
agCurCfgMgmtNetSubnet
The Management Network Address in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.2.1.2
agCurCfgMgmtNetMask
The Management Network Mask/Prefix Length in the current configuration
block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.2.1.3

agNewCfgMgmtNetTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.12.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agNewCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agNewCfgMgmtNetTable' 
The table for Management Network definitions
in the new configuration block.
agNewCfgMgmtNetEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.12.3.1
A row in the management network definition table.
Indexes
No indexes recorded
Column Syntax OID
agNewCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Enumerated Values:
0data-port
1mgtb-port
2mgta-port
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.3.1.1
agNewCfgMgmtNetSubnet
The Management Network Address in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.3.1.2
agNewCfgMgmtNetMask
The Management Network Mask/Prefix length in the new configuration
block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.12.3.1.3
agNewCfgMgmtNetDelete
By setting the value to delete(2), the entire row is deleted.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.12.3.1.4

agAccessUserCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.19.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agAccessUserCurCfgTable' 
The table of Access user configuration.
agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1
A row in the Access user configuration table.
Indexes
No indexes recorded
Column Syntax OID
agAccessUserCurCfgUId
The User identifier.
SNMPv2-SMIInteger32
Enumerated Values:
0data-port
1mgtb-port
2mgta-port
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1.1
agAccessUserCurCos
The user class of service.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1.2
agAccessUserCurCfgName
The user name. Please note, the max length is 8 in stacking mode.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1.3
agAccessUserCurCfgPswd
The character string representing the user password.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1.4
agAccessUserCurCfgState
User validation (enabled or disabled) in current
configuration block.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.19.2.1.6

agAccessUserNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.19.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agAccessUserNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agAccessUserNewCfgTable' 
The table of Access user configuration.
agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1
A row in the Access user configuration table.
Indexes
No indexes recorded
Column Syntax OID
agAccessUserNewCfgUId
The User identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.1
agAccessUserNewCos
The user class of service.
Enumerationr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.2
agAccessUserNewCfgName
The user name. Please note, the max length is 8 in stacking mode.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.3
agAccessUserNewCfgPswd
The character string representing the user password.
OctetStringr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.4
agAccessUserNewCfgState
User validation (enabled or disabled) in new
configuration block.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.7
agAccessUserNewCfgDelete
This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.19.3.1.8

ldapHostCurConfigTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.21.46 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostCurConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ldapHostCurConfigTable' 
The table for user specified host.
ldapHostCurConfigTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.21.46.1
A row in the user specified host table.
Indexes
No indexes recorded
Column Syntax OID
ldapHostCurConfigIndex
The index of the user specified host table.
SNMPv2-SMIInteger32
Constraints:
range: 5-60
 .1.3.6.1.4.1.26543.2.7.4.1.1.21.46.1.1
ldapHostCurAddr
Specify the group addr.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.1.21.46.1.2
ldapHostCurPort
Specify the group port.
Integer32 .1.3.6.1.4.1.26543.2.7.4.1.1.21.46.1.3
ldapHostCurPortType
Specify the host port type.
data-port: Data port
mgta-port: Management A port
mgtb-port: Management B port
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.1.21.46.1.4

ldapHostNewConfigTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.21.47 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ldapHostNewConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ldapHostNewConfigTable' 
The table for user specified host.
ldapHostNewConfigTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1
A row in the user specified host table.
Indexes
No indexes recorded
Column Syntax OID
ldapHostNewConfigIndex
The index of the user specified host table.
SNMPv2-SMIInteger32
Constraints:
range: 5-60
 .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1.1
ldapHostNewAddr
Specify the group addr.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1.2
ldapHostNewPort
Specify the host port.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1.3
ldapHostNewPortType
Specify the host port type.
data-port: Data port
mgta-port: Management A port
mgtb-port: Management B port
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1.4
ldapHostNewCfgDelete
This is an action object to create or delete a host.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a host
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.21.47.1.5

sshPubKeyConfigTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.22.15 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sshPubKeyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::sshPubKeyConfigTable' 
The table for ssh public keys and its users.
sshPubKeyConfigEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1
A row in the ssh public keys tables.
Indexes
No indexes recorded
Column Syntax OID
sshPubKeyConfigIndex
The index of the ssh public key entry.
SNMPv2-SMIInteger32
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.1
sshPubKeyType
Specify the type of the public key.
Enumeration
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.2
sshPubKeyHashValue
The hash value of a specific public key.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.3
sshPubkeyUserBmap
The user list in the key entry. The user are presented in bitmap format.
as follows:

OCTET 1 OCTET 2 OCTET 3 OCTET 4
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|| | | |||| ||__…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.4
sshPubKeyAddUser
Add a new user to a particular public key.
Reminder: The user must be a valid system user.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.5
sshPubKeyDelUser
Remove a user from the user list of the public key entry.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.6
sshPubKeyRemEntry
Remove a public key entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.1.22.15.1.7

sflowCurPortCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.24.7 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::sflowCurPortCfgTable' 
The table of sFlow port configuration.
sflowCurPortCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.24.7.1
A row in the sFlow port configuration table.
Indexes
No indexes recorded
Column Syntax OID
sflowCurPortCfgTableId
sFlow port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.1.24.7.1.1
sflowCurPortSampling
The current sFlow port sampling rate.
Integer32 .1.3.6.1.4.1.26543.2.7.4.1.1.24.7.1.2
sflowCurPortPolling
The current sFlow port polling interval.
Integer32 .1.3.6.1.4.1.26543.2.7.4.1.1.24.7.1.3
sflowCurPortCfgPortAlias
The current sFlow port alias.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.24.7.1.4

sflowNewPortCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.1.1.24.8 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sflowNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::sflowNewPortCfgTable' 
The table of sFlow port configuration.
sflowNewPortCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.1.24.8.1
A row in the sFlow port configuration table.
Indexes
Column Syntax OID
sflowNewPortCfgTableId
sFlow port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.1.24.8.1.1
sflowNewPortSampling
The new sFlow port sampling rate.
Valid range: 1-16777215| 0 for disable
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.1.1.24.8.1.2
sflowNewPortPolling
The new sFlow port polling interval.
Valid range: 5-60| 0 for disable
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.1.1.24.8.1.3
sflowNewPortCfgPortAlias
The new sFlow port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.1.24.8.1.4

cpuUtilProcessStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.2.5 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::cpuUtilProcessStatsTable' 
The table of CPU utilization per process statistics. It is deprecated.
cpuUtilProcessStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1
A row in the CPU utilization stats per process table. It is deprecated.
Indexes
No indexes recorded
Column Syntax OID
processId
The process ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.1
processName
Process Name.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.2
cpuProcessUtil1Sec
The utilization of MP CPU over 1 second.
It shows the percentage.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.3
cpuProcessUtil5Sec
The utilization of MP CPU over 5 seconds.
It shows the percentage.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.4
cpuProcessUtil1Min
The utilization of MP CPU over 1 min.
It shows the percentage.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.5
cpuProcessUtil5Min
The utilization of MP CPU over 5 min.
It shows the percentage.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.6
processStatus
Process Status
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.5.1.7

cpuUtilProcessStatsRevTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.2.11 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cpuUtilProcessStatsRevTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::cpuUtilProcessStatsRevTable' 
The table of CPU utilization per process statistics.
cpuUtilProcessStatsRevTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1
A row in the CPU utilization stats per process table.
Indexes
No indexes recorded
Column Syntax OID
processIdRev
The process ID.
SNMPv2-SMIInteger32
Enumerated Values:
1ok
2clear
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.1
processNameRev
Process Name.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.2
cpuProcessUtil1SecRev
The utilization of MP CPU over 1 second.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.3
cpuProcessUtil5SecRev
The utilization of MP CPU over 5 seconds.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.4
cpuProcessUtil1MinRev
The utilization of MP CPU over 1 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.5
cpuProcessUtil5MinRev
The utilization of MP CPU over 5 min.
It shows the percentage.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.6
processStatusRev
Process Status
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.2.11.1.7

portStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.3.1 · 1 row entry · 29 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::portStatsTable' 
The table of port statistics.
portStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1
A row in the port stats table.
Indexes
No indexes recorded
Column Syntax OID
portStatsIndx
The port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.1
portStatsPhyIfInOctets
The total number of octets received on the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.2
portStatsPhyIfInUcastPkts
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.3
portStatsPhyIfInNUcastPkts
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.4
portStatsPhyIfInDiscards
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.5
portStatsPhyIfInErrors
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.6
portStatsPhyIfInUnknownProtos
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.7
portStatsPhyIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.8
portStatsPhyIfOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.9
portStatsPhyIfOutNUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.10
portStatsPhyIfOutDiscards
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.11
portStatsPhyIfOutErrors
The number of outbound packets that could not be
transmitted because of errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.12
portStatsPhyIfOutQLen
The length of the output packet queue (in
packets).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.13
portStatsPhyIfInBroadcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.15
portStatsClear
Setting this value to clear(2) clears the stats for this port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.16
portStatsPhyIfInMulticastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.17
portStatsPhyIfOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.18
portStatsLinkStateChange
Number of link state changes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.20
portStatsPhyIfInFctlPkts
The number of inbound flow control packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.21
portStatsPhyIfOutFctlPkts
The number of outbound flow control packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.22
portStatsPhyIfInFctlPktsRate
The number of inbound flow control packets per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.23
portStatsPhyIfOutFctlPktsRate
The number of outbound flow control packets per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.24
portStatsDot1PortInFrames
The number of IN frames per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.31
portStatsDot1PortOutFrames
The number of OUT frames per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.32
portStatsDot1PortInDiscards
The number of IN packets discarded per port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.33
portStatsDot1TpLearnedEntryDiscards
The number of Dot1Tp learned entries discarded.
SNMPv2-SMICounter32
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.34
portStatsDot1StpPortForwardTransitions
The number of transitions ....
SNMPv2-SMICounter32
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.35
portStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.1.1.41

portMgmtStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.3.3 · 1 row entry · 16 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portMgmtStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::portMgmtStatsTable' 
The table of port statistics.
portMgmtStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1
A row in the management port stats table.
Indexes
No indexes recorded
Column Syntax OID
portMgmtStatsIndx
The management port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.1
portMgmtStatsRxBytes
The total number of bytes received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.2
portMgmtStatsTxBytes
The total number of bytes transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.3
portMgmtStatsRxpackets
Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.4
portMgmtStatsTxpackets
Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.5
portMgmtStatsRxErrors
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.6
portMgmtStatsTxErrors
The number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.7
portMgmtStatsRxDropped
The number of inbound packets that were dropped.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.8
portMgmtStatsTxDropped
The number of outbound packets that were dropped.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.9
portMgmtStatsRxOverruns
The number of data overruns over this link.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.10
portMgmtStatsTxOverruns
The number of data overruns over this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.11
portMgmtStatsRxFrame
The number of frames received on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.12
portMgmtStatsTxCarrier
The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.13
portMgmtStatsRxMulticast
The total number of multicast packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.14
portMgmtStatsTxCollisions
The number of collisions on this outbound segment.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.15
portMgmtStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Constraints:
range: 0-20
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.3.1.16

allportsStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.3.4 · 1 row entry · 36 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk allportsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::allportsStatsTable' 
The table of all ports statistics.
allportsStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1
A row in the table of all ports statistics.
Indexes
No indexes recorded
Column Syntax OID
allportsStatsIndx
The port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.1
allportsStatsDescr
The port description.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.2
allportsStatsSpeed
The current operational speed of the port.
Enumeration
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.3
allportsStatsPhysAddress
The port MAC Address.
SNMPv2-TCPhysAddress
Constraints:
range: 0-20
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.4
allportsStatsAdminStatus
The port Admin state.
Enumeration
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.5
allportsStatsOperStatus
The port Operational Status.
Enumeration
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.6
allportsStatsInOctets
Octets In for port.
SNMPv2-SMICounter32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.7
allportsStatsOutOctets
Octets Out for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.8
allportsStatsInPkts
Packets In for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.9
allportsStatsOutPkts
Packets Out for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.10
allportsStatsInUcast
Unicast Packets In for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.11
allportsStatsOutUcast
Unicast Packets Out for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.12
allportsStatsInBcast
Broadcasts Packets In for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.13
allportsStatsOutBcast
Broadcasts Packets Out for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.14
allportsStatsInMcast
Multicast Packets In for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.15
allportsStatsOutMcast
Multicast Packets Out for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.16
allportsStatsInDiscards
Discarded Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.17
allportsStatsOutDiscards
Outbound Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.18
allportsStatsInErrors
Error Packets for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.19
allportsStatsOutErrors
Not sent packets due to error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.20
allportsStatsInUnknownProtos
Unknown protocol packets.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.21
allportsStatsOutQLen
Outbound Packet Queue Length.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.22
allportsStatsLinkStateChange
Number of link state changes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.26
allportsStatsInOctetsRate
Octets In rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.30
allportsStatsOutOctetsRate
Octets Out rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.31
allportsStatsInUcastRate
Unicast Packets In rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.32
allportsStatsOutUcastRate
Unicast Packets Out rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.33
allportsStatsInBcastRate
Broadcasts Packets In rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.34
allportsStatsOutBcastRate
Broadcasts Packets Out rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.35
allportsStatsInMcastRate
Multicast Packets In rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.36
allportsStatsOutMcastRate
Multicast Packets Out rate for port.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.37
allportsStatsInDiscardsRate
Discarded In Packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.38
allportsStatsOutDiscardsRate
Discarded Out Packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.39
allportsStatsInErrorsRate
Erroneus inbound packets rate for port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.40
allportsStatsOutErrorsRate
Not sent packets due to error rate.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.41
allportsStatsPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.4.1.42

dot1RateStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.3.7 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot1RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dot1RateStatsTable' 
The table of bridging statistics per second.
dot1RateStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1
Bridging statistics per second.
Indexes
No indexes recorded
Column Syntax OID
dot1RateStatsIndx
The port index.
PortNumber
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.1
dot1RatePortInFrames
The number of frames that have been received
per second by this port from its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.2
dot1RatePortOutFrames
The number of frames that have been transmitted
per second by this port to its segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.3
dot1RatePortInDiscards
Count of valid frames received which were
discarded per second.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.4
dot1RateTpLearnedEntryDiscards
The number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.5
dot1RateStpPortForwardTransitions
The number of times this port has transitioned
per second from the Learning state to the
Forwarding state.
SNMPv2-SMICounter32
Enumerated Values:
1ok
2clear
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.8
dot1RatePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.7.1.9

dot3RateStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.3.8 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dot3RateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dot3RateStatsTable' 
The table of Ethernet statistics per second.
dot3RateStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1
Ethernet statistics per second.
Indexes
No indexes recorded
Column Syntax OID
dot3RateStatsIndx
The port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.1
dot3RateStatsAlignmentErrors
A count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check.
SNMPv2-SMICounter32
Enumerated Values:
1ok
2clear
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.2
dot3RateStatsFCSErrors
A count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.3
dot3RateStatsSingleCollisionFrames
A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.4
dot3RateStatsMultipleCollisionFrames
A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.5
dot3RateStatsLateCollisions
The number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.8
dot3RateStatsExcessiveCollisions
A count per second of frames for which
transmission on a particular interface fails
due to excessive collisions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.9
dot3RateStatsInternalMacTransmitErrors
A count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.10
dot3RateStatsFrameTooLongs
A count per second of frames received on a particular
interface that exceed the maximum permitted frame size.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.12
dot3RateStatsInternalMacReceiveErrors
A count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.13
dot3RatePortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.3.8.1.14

aclStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.11.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclStatsTable' 
The table of ACL statistics.
aclStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.11.1.1
Statistics about a particular ACL configuration entry.
Indexes
No indexes recorded
Column Syntax OID
aclStatsIndex
The acl index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.1.1.1
aclStatsHits
Total number of hits for this ACL entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.1.1.2
aclClearStats
Setting this value to clear(2) clears the stats for the ACL.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.2.11.1.1.3

vmapStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.11.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapStatsTable' 
The table of VMAP statistics.
vmapStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.11.2.1
Statistics about a particular VMAP configuration entry.
Indexes
No indexes recorded
Column Syntax OID
vmapStatsIndex
The vmap index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.2.1.1
vmapStatsHits
Total number of hits for this VMAP entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.2.1.2
vmapClearStats
Setting this value to clear(2) clears the stats for the VMAP.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.2.11.2.1.3

acl6StatsTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.11.3 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::acl6StatsTable' 
The table of IPv6 ACL statistics.
acl6StatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.11.3.1
Statistics about a particular IPv6 ACL configuration entry.
Indexes
No indexes recorded
Column Syntax OID
acl6StatsIndex
The ipv6 acl index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.3.1.1
acl6StatsHits
Total number of hits for this IPv6 ACL entry
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.11.3.1.2
acl6ClearStats
Setting this value to clear(2) clears the stats for the IPv6 ACL.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.2.11.3.1.3

tcpControlBlocksTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.21.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::tcpControlBlocksTable' 
All TCP allocated control blocks
tcpControlBlocksTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1
A row in the TCP control blocks table.
Indexes
No indexes recorded
Column Syntax OID
tcpControlBlocksIndx
The TCP blocks index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.1
destAddr
The TCP block destination address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.2
remotePort
Tcp informations concerning the remote port
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.3
sourceAddr
IP address of the source of the Tcp block
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.4
localPort
Tcp informations concerning the local port
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.5
state
The state of the Tcp
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.6
portType
The type of the local port
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.7
portState
The state of the local port
SNMPv2-TCDisplayString
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
6mbs10000
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.1.1.8

tcpMGMTControlBlocksTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.21.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tcpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::tcpMGMTControlBlocksTable' 
All TCP allocated control blocks on MGMT port
tcpMGMTTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1
A row in the TCP on MGMT port table.
Indexes
No indexes recorded
Column Syntax OID
tcpMGMTIndx
Index in the tcpMGMTControlBlocksTable table.
SNMPv2-SMIInteger32
Enumerated Values:
1up
2down
3disabled
4inoperative
5errdisabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.1
recvQ
The size of the received TCP queue.
SNMPv2-SMIInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.2
sentQ
The size of the sent TCP blocks queue.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.3
localAddress
The local address for the TCP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.4
foreignAddress
The remote address for the TCP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.5
stateMgmt
The port's state.
SNMPv2-TCDisplayString
Enumerated Values:
1up
2down
3testing
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.21.2.1.6

udpControlBlocksTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.22.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::udpControlBlocksTable' 
All UDP control blocks in use
udpControlBlocksTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.22.1.1
A row in the UDP control blocks table.
Indexes
No indexes recorded
Column Syntax OID
udpMpLocalPort
The current UDP local port.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.1.1.1
udpMpState
The port's state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.1.1.2

udpMGMTControlBlocksTable

table
.1.3.6.1.4.1.26543.2.7.4.1.2.22.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udpMGMTControlBlocksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::udpMGMTControlBlocksTable' 
All UDP control blocks allocated  on MGMT port
udpMGMTTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1
A row in the UDP on MGMT port table.
Indexes
No indexes recorded
Column Syntax OID
udpMGMTIndx
Index in the udpMGMTControlBlocksTable table.
SNMPv2-SMIInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.1
recvQUdp
The size of the received UDP queue.
SNMPv2-SMIInteger32
Enumerated Values:
0no-guard
1loop
2root
3global-loop
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.2
sentQUdp
The size of the sent UDP blocks queue.
SNMPv2-SMIInteger32
Enumerated Values:
1yes
2no
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.3
localAddressUdp
The local address for the UDP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.4
foreignAddressUdp
The remote address for the UDP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.5
stateMgmtUdp
The port's state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.2.22.2.1.6

portInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.2.1 · 1 row entry · 20 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk portInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::portInfoTable' 
The table of port information.
portInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1
A row in the port information table.
Indexes
No indexes recorded
Column Syntax OID
portInfoIndx
The port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.1
portInfoSpeed
The current operational speed of the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.2
portInfoMode
The current operational mode of the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.3
portInfoFlowCtrl
The current operational flow control of the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.4
portInfoLink
The current operational link status of the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.5
portInfoPhyIfDescr
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.6
portInfoPhyIfType
The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.7
portInfoPhyIfMtu
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.8
portInfoPhyIfPhysAddress
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet stri…
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.9
portInfoPhyIfOperStatus
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.10
portInfoPhyIfLastChange
The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.11
portInfoLearning
The port L2 (FDB) Learning state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.18
portInfoBpduGuard
The operational status of BPDU Guard on the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.20
portInfoPvid
This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned …
SNMPv2-SMIUnsigned32
Constraints:
range: 0-6
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.21
portInfoVlanTag
This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is as…
Enumeration
Constraints:
range: 0-6
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.22
portInfoErrDisableRecovery
This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been…
Enumeration
Enumerated Values:
1notInstalled
2enabled
3disabled
5notAvailable
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.23
portInfoErrDisableTimeLeft
If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatical…
Integer32
Enumerated Values:
1notInstalled
2down
3link
4notAvailable
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.24
portInfoExtGuard
The operational status of STP Loop/Root Guard on the port.
Enumeration
Enumerated Values:
1notInstalled
2fault
3none
4notAvailable
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.25
portInfoLFDState
This object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,
otherwise the value is 'no'.
Enumeration
Enumerated Values:
1notInstalled
2notApproved
3sfpApproved
5sfpAccepted
6sfpRestrict
7sfpUnsupprt
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.26
portInfoAlias
The alias of the row in portInfo configuration table.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.2.1.1.27

agDiffTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agDiffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agDiffTable' 
The table of diff strings.
agDiffTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.4.4.1
An entry in the diff table.
Indexes
No indexes recorded
Column Syntax OID
agDiffIndex
The table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.3.4.4.1.1
agDiffString
A string in the diff table.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.4.4.1.2

agCfgDumpTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.5.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agCfgDumpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agCfgDumpTable' 
The table of dump strings.
agCfgDumpTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.5.4.1
An entry in the dump table.
Indexes
No indexes recorded
Column Syntax OID
agCfgDumpIndex
The table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.3.5.4.1.1
agCfgDumpString
A string in the dump table.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.5.4.1.2

geaportInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk geaportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::geaportInfoTable' 
The table of gea port mapping.
geaportInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.9.1.1
An entry in the geaport table mapping.
Indexes
No indexes recorded
Column Syntax OID
geaportInfoLogicalIndex
The logical port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.3.9.1.1.1
geaportInfoAlias
The GEA Port Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.9.1.1.2
geaportInfoPort
The GEA Port (0-based).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.3.9.1.1.3
geaportInfoUnit
The GEA Unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.1.3.9.1.1.4

sfpInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.11.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::sfpInfoTable' 
The table of external port SFP information.
sfpInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1
A row in the external port SFP information table.
Indexes
No indexes recorded
Column Syntax OID
sfpInfoIndx
The external port SFX index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.1
sfpInfoPortAlias
External Port SFP/XFP alias.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.2
sfpInfoDevice
External Port SFP/XFP Device.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.3
sfpInfoTXEnable
External Port SFP/XFP TX-Enable.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.4
sfpInfoRXSignal
External Port SFP/XFP RX-Signal.
Enumeration
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.5
sfpInfoTXFault
External Port SFP/XFP TX-Fault.
Enumeration
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.6
sfpInfoApproved
External Port SFP/XFP Approval.
Enumeration
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.7
sfpInfoVendor
External Port SFP/XFP device vendor.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.8
sfpInfoSerial
External Port SFP/XFP device serial.
OctetString .1.3.6.1.4.1.26543.2.7.4.1.3.11.1.1.9

vmGroupInfoTbl

table
.1.3.6.1.4.1.26543.2.7.4.1.3.12.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmGroupInfoTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmGroupInfoTbl' 
Virtual MAC information table
vmGroupInfolistEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1
The run-time information about a virtual machine
Indexes
No indexes recorded
Column Syntax OID
vmGroupInfoIdx
Table index, 1 based.
SNMPv2-SMIUnsigned32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.1
vmGroupInfoMac
The virtual machine MAC address.
SNMPv2-TCPhysAddress
Enumerated Values:
1enabled
2disabled
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.2
vmGroupInfoIP
The virtual machine IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.3
vmGroupInfoPortIdx
System port connected to the virtual machine.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.4
vmGroupInfoGroup
The virtual machine group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.5
vmGroupInfoVlan
The virtual machine VLAN
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.6
vmGroupInfoIsESXSvcCon
Set to 1 if ESX Service Console Interface, else 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.7
vmGroupInfoIsVMK
Set to 1 if VM Kernel Interface, else 0.
SNMPv2-SMIUnsigned32
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.8
vmGroupInfoName
Virtual Machine Name, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.9
vmGroupInfoUUID
Virtual Machine UUID, if available.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.10
vmGroupInfoVSwitch
Virtual Machine VSwitch, if available.
SNMPv2-TCDisplayString
Enumerated Values:
0none
1primary
2isolated
3community
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.11
vmGroupInfoPortGroup
Virtual Machine Port Group, if available.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.12
vmGroupInfoHost
Virtual Machine Host, if available.
SNMPv2-TCDisplayString
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.13
vmGroupInfoPortAlias
System port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.3.12.1.1.14

accessUserInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.1.3.13.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk accessUserInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::accessUserInfoTable' 
The table of user information.
accessUserInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.3.13.3.1
An entry in the user information table.
Indexes
No indexes recorded
Column Syntax OID
accessUserInfoIndex
The table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user.
SNMPv2-SMIInteger32
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.1.3.13.3.1.1
accessUserInfoLockState
Lock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator.
Enumeration .1.3.6.1.4.1.26543.2.7.4.1.3.13.3.1.2
accessUserInfoClearFailAttempts
Action Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.1.3.13.3.1.3
accessUserInfoClearLock
Action Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.3.13.3.1.4

agPortOperTable

table
.1.3.6.1.4.1.26543.2.7.4.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk agPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::agPortOperTable' 
The table of port operations.
agPortOperTableEntry row .1.3.6.1.4.1.26543.2.7.4.1.4.1.1
A row in the port operations table.
Indexes
No indexes recorded
Column Syntax OID
portOperIdx
The port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.1.4.1.1.1
portOperState
Enable/Disable port.
Enumerationr/w
Enumerated Values:
0none
1primary
2isolated
3community
 .1.3.6.1.4.1.26543.2.7.4.1.4.1.1.2
portOperRmon
Enable/Disable RMON for port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.1.4.1.1.3
portOperLearning
Enable/Disable L2 (FDB) Learning for this port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.1.4.1.1.4
portOperAlias
The port alias..
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.1.4.1.1.5

vlanCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlanCurCfgTable' 
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1
A row in the VLAN configuration table.
Indexes
No indexes recorded
Column Syntax OID
vlanCurCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.1
vlanCurCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.2
vlanCurCfgState
Enable or disable a VLAN
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.3
vlanCurCfgStg
The Spanning Tree Group for the VLAN.
SNMPv2-SMIInteger32
Enumerated Values:
1enable
2disable
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.5
vlanCurCfgVlanName
The VLAN name.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.9
vlanCurCfgPrVlanType
The type of the Private VLAN.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.10
vlanCurCfgPrVlanMapPriId
The primary vlan id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.11
vlanCurCfgPrVlanState
Enable or disable a Private VLAN.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.1.2.1.12

vlanNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlanNewCfgTable' 
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1
A row in the VLAN configuration table.
Indexes
No indexes recorded
Column Syntax OID
vlanNewCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Enumerated Values:
1enable
2disable
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.1
vlanNewCfgVlanName
The VLAN name.
OctetStringr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.2
vlanNewCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.3
vlanNewCfgState
Enable or disable a VLAN
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.4
vlanNewCfgAddPortIndex
The port to be added to the specified VLAN. A '0' value is
returned when read.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.5
vlanNewCfgRemovePortIndex
The port to be removed from the specified VLAN. A '0'
value is returned when read.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.6
vlanNewCfgDelete
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.7
vlanNewCfgStg
The Spanning Tree Group for the VLAN.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.9
vlanNewCfgPrVlanType
The type of the Private VLAN.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.13
vlanNewCfgPrVlanMapPriId
The primary vlan id. To delete set 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.14
vlanNewCfgPrVlanState
Enable or disable a Private VLAN.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.15
vlanNewCfgAddPortAlias
The port alias to be added to the specified VLAN. A '0' value is
returned when read.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.28
vlanNewCfgRemovePortAlias
The port alias to be removed from the specified VLAN. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.1.3.1.29

trunkGroupCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkGroupCurCfgTable' 
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.2.2.1
A row in the trunk group configuration table.
Indexes
No indexes recorded
Column Syntax OID
trunkGroupCurCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Enumerated Values:
1on
2off
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.2.1.1
trunkGroupCurCfgPorts
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.2.1.2
trunkGroupCurCfgState
Enable or disable a trunk group.
Enumeration
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.2.1.3

trunkGroupNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkGroupNewCfgTable' 
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1
A row in the trunk group configuration table.
Indexes
No indexes recorded
Column Syntax OID
trunkGroupNewCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Constraints:
range: 0-512
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.1
trunkGroupNewCfgPorts
The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.2
trunkGroupNewCfgAddPortIndex
The port to be added in the trunk group. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.3
trunkGroupNewCfgRemovePortIndex
The port to be deleted from the trunk group. when read, 0
is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.4
trunkGroupNewCfgState
Enable or disable a trunk group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.5
trunkGroupNewCfgDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1default-config
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.6
trunkGroupNewCfgAddPortAlias
The port alias to be added in the trunk group. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.7
trunkGroupNewCfgRemovePortAlias
The port alias to be deleted from the trunk group. when read, 0
is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.3.1.8

trunkLacpGroupCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.2.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkLacpGroupCurCfgTable' 
The table of LACP trunk group configuration.
trunkLacpGroupCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.2.5.1
A row in the LACP trunk group configuration table.
Indexes
No indexes recorded
Column Syntax OID
trunkLacpGroupCurCfgIndex
The identifier of the LACP trunk group.
SNMPv2-SMIInteger32
Constraints:
range: 4-30
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.5.1.1
trunkLacpGroupCurCfgAdminKey
The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
SNMPv2-SMIInteger32
Constraints:
range: 6-40
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.5.1.2

trunkLacpGroupNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.2.6 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkLacpGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkLacpGroupNewCfgTable' 
The table of LACP trunk group configuration.
trunkLacpGroupNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.2.6.1
A row in the LACP trunk group configuration table.
Indexes
No indexes recorded
Column Syntax OID
trunkLacpGroupNewCfgIndex
The identifier of the LACP trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.2.6.1.1
trunkLacpGroupNewCfgAdminKey
The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
Value 0 means LACP trunk group deletion.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.2.6.1.2

stgCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stgCurCfgTable' 
The table of Spanning Tree Group configuration.
stgCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
No indexes recorded
Column Syntax OID
stgCurCfgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Enumerated Values:
1on
2off
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.1
stgCurCfgState
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Constraints:
range: 0-240
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.2
stgCurCfgPriority
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.5
stgCurCfgBrgHelloTime
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.6
stgCurCfgBrgForwardDelay
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.7
stgCurCfgBrgMaxAge
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.8
stgCurCfgVlanBmap
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.3.1.1.10

stgNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.3.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stgNewCfgTable' 
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
No indexes recorded
Column Syntax OID
stgNewCfgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Constraints:
range: 0-240
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.1
stgNewCfgState
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.2
stgNewCfgDefaultCfg
Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.3
stgNewCfgAddVlan
The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.4
stgNewCfgRemoveVlan
The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.5
stgNewCfgPriority
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.8
stgNewCfgBrgHelloTime
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.9
stgNewCfgBrgForwardDelay
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32r/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.10
stgNewCfgBrgMaxAge
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.11
stgNewCfgVlanBmap
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.13
stgNewCfgRemoveAllVlan
The all vlans to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.3.2.1.14

stgCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.3.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stgCurCfgPortTable' 
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
No indexes recorded
Column Syntax OID
stgCurCfgStgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.1
stgCurCfgPortIndex
The port identifier of a particular Spanning Tree Group.
PortNumber
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.2
stgCurCfgPortState
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.3
stgCurCfgPortPriority
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.4
stgCurCfgPortPathCost
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.5
stgCurCfgPortAlias
The port alias of a particular Spanning Tree Group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.3.1.8

stgNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.3.4 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stgNewCfgPortTable' 
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stgNewCfgStgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.1
stgNewCfgPortIndex
The port identifier of a particular Spanning Tree Group.
PortNumber
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.2
stgNewCfgPortState
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.3
stgNewCfgPortPriority
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.4
stgNewCfgPortPathCost
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.5
stgNewCfgPortAlias
The port alias of a particular Spanning Tree Group.
SNMPv2-TCDisplayString
Enumerated Values:
1suspend
2individual
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.3.4.1.8

pmCurCfgPortMonitorTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::pmCurCfgPortMonitorTable' 
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1
A row in the monitoring port table.
Indexes
No indexes recorded
Column Syntax OID
pmCurCfgPmirrMoniPortIndex
The monitoring port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndex
The mirrored port number
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1.2
pmCurCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1.3
pmCurCfgPmirrMoniPortAlias
The monitoring port alias.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1.7
pmCurCfgPmirrMirrPortAlias
The mirrored port alias.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.3.1.8

pmNewCfgPortMonitorTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::pmNewCfgPortMonitorTable' 
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1
A row in the monitoring port table.
Indexes
No indexes recorded
Column Syntax OID
pmNewCfgPmirrMoniPortIndex
The monitoring port number.
PortNumber
Enumerated Values:
1suspend
2individual
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndex
The mirrored port number
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.2
pmNewCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.3
pmNewCfgPmirrDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.4
pmNewCfgPmonDelete
Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.10
pmNewCfgPmirrMoniPortAlias
The monitoring port alias.
SNMPv2-TCDisplayString
Constraints:
range: 0-240
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.11
pmNewCfgPmirrMirrPortAlias
The mirrored port alias.
SNMPv2-TCDisplayString
Constraints:
range: 0-200000000
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.4.1.4.1.12

lacpCurPortCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.5.7 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpCurPortCfgTable' 
The table of LACP port configuration.
lacpCurPortCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1
A row in the LACP port configuration table.
Indexes
No indexes recorded
Column Syntax OID
lacpCurPortCfgTableId
LACP port number.
PortNumber
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.1
lacpCurPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumeration
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.2
lacpCurPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-only.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.3
lacpCurPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.4
lacpCurPortActorMinLinks
The current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.5
lacpCurPortSuspendIndividual
It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.6
lacpCurPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.7.1.7

lacpNewPortCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.5.8 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpNewPortCfgTable' 
The table of LACP port configuration.
lacpNewPortCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1
A row in the LACP port configuration table.
Indexes
No indexes recorded
Column Syntax OID
lacpNewPortCfgTableId
LACP port number.
PortNumber
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.1
lacpNewPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.2
lacpNewPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.3
lacpNewPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.4
lacpNewPortActorMinLinks
The current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.5
lacpNewPortSetToDefault
When read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.6
lacpNewPortSuspendIndividual
It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.7
lacpNewPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.5.8.1.8

mstCistCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mstCistCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mstCistCurCfgPortTable' 
The table of CIST Port configuration.
mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1
Information about a particular CIST Port configuration.
Indexes
No indexes recorded
Column Syntax OID
mstCistCurCfgPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.1
mstCistCurCfgPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.2
mstCistCurCfgPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.3
mstCistCurCfgPortLinkType
The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.4
mstCistCurCfgPortEdge
The value of the Edge Port parameter. (for MSTP only)
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.5
mstCistCurCfgPortStpState
Turn port's Spanning Tree on/off.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.6
mstCistCurCfgPortHelloTime
The amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.7
mstCistCurCfgPortPvstProtection
The value of the PVST Protection parameter.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.8
mstCistCurCfgPortAlias
The port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.3.1.9

mstCistNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mstCistNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mstCistNewCfgPortTable' 
The table of CIST Port configuration.
mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1
Information about a particular CIST Port configuration.
Indexes
No indexes recorded
Column Syntax OID
mstCistNewCfgPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.1
mstCistNewCfgPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.2
mstCistNewCfgPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.3
mstCistNewCfgPortStpState
Turn port's Spanning Tree on/off.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.6
mstCistNewCfgPortHelloTime
The amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.7
mstCistNewCfgPortPvstProtection
The value of the PVST Protection parameter.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.8
mstCistNewCfgPortAlias
The port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.7.2.4.1.9

failoverCurCfgTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.10.6 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::failoverCurCfgTriggerTable' 
The Failover Trigger Table.
failoverCurCfgTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1
A row in the Failover Trigger Table.
Indexes
No indexes recorded
Column Syntax OID
failoverCurCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.1
failoverCurCfgTriggerState
Enable or disable Trigger state
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.2
failoverCurCfgTriggerLimit
Limit # of operational links
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.3
failoverCurCfgTriggerMmonPort
The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.6
failoverCurCfgTriggerMmonTrunk
The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.7
failoverCurCfgTriggerMmonKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.8
failoverCurCfgTriggerMconPort
The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.9
failoverCurCfgTriggerMconTrunk
The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.11
failoverCurCfgTriggerMconKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Enumerated Values:
1other
2delete
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.6.1.12

failoverNewCfgTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.10.7 · 1 row entry · 26 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::failoverNewCfgTriggerTable' 
The Failover Trigger Table.
failoverNewCfgTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1
A row in the Failover Trigger Table.
Indexes
No indexes recorded
Column Syntax OID
failoverNewCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.1
failoverNewCfgTriggerState
Enable or disable Trigger state
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.2
failoverNewCfgTriggerLimit
Limit # of operational links
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.3
failoverNewCfgTriggerMmonPort
The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.10
failoverNewCfgTriggerMmonPortIndexAdd
Add port to Manual Monitor. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.11
failoverNewCfgTriggerMmonPortIndexRem
Remove port from Manual Monitor. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.12
failoverNewCfgTriggerMmonTrunk
The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.13
failoverNewCfgTriggerMmonTrunkAdd
Add trunk to Manual Monitor. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.14
failoverNewCfgTriggerMmonTrunkRem
Remove trunk from Manual Monitor. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.15
failoverNewCfgTriggerMmonKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.16
failoverNewCfgTriggerMmonKeyAdd
Add LACP admin key to Manual Monitor. When read, 0 is returned.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.17
failoverNewCfgTriggerMmonKeyRem
Remove LACP admin key from Manual Monitor. When read, 0 is returned.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.18
failoverNewCfgTriggerMconPort
The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.19
failoverNewCfgTriggerMconPortIndexAdd
Add port to Manual Control. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.20
failoverNewCfgTriggerMconPortIndexRem
Remove port from Manual Control. When read, 0 is returned.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.21
failoverNewCfgTriggerMconTrunk
The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.25
failoverNewCfgTriggerMconTrunkAdd
Add trunk to Manual Control. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.26
failoverNewCfgTriggerMconTrunkRem
Remove trunk from Manual Control. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.27
failoverNewCfgTriggerMconKey
The LACP admin key. This is an array of 16-bit read-only values.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.28
failoverNewCfgTriggerMconKeyAdd
Add LACP admin key to Manual Control. When read, 0 is returned.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.29
failoverNewCfgTriggerMconKeyRem
Remove LACP admin key from Manual Control. When read, 0 is returned.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.30
failoverNewCfgTriggerDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.31
failoverNewCfgTriggerMmonPortAliasAdd
Add port to Manual Monitor using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.33
failoverNewCfgTriggerMmonPortAliasRem
Remove port from Manual Monitor using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.34
failoverNewCfgTriggerMconPortAliasAdd
Add port to Manual Control using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.35
failoverNewCfgTriggerMconPortAliasRem
Remove port from Manual Control using its alias. When read, 0 is returned.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.10.7.1.36

fdbCurCfgStaticTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.13.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbCurCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fdbCurCfgStaticTable' 
The table of FDB static entries.
fdbCurCfgStaticEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1
A row in the fdb table.
Indexes
No indexes recorded
Column Syntax OID
fdbCurCfgEntryIndex
The fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.1
fdbCurCfgVlan
Add vlan for fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.2
fdbCurCfgPortIndex
The MAC address port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.3
fdbCurCfgMac
Add a fdb entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.4
fdbCurCfgTrunk
The MAC address trunk number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.5
fdbCurCfgAdminkey
The MAC address LACP trunk adminkey.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.6
fdbCurCfgPortAlias
The MAC address port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.2.1.7

fdbNewCfgStaticTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.13.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbNewCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fdbNewCfgStaticTable' 
The table of FDB static entries.
fdbNewCfgStaticEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1
A row in the fdb table.
Indexes
No indexes recorded
Column Syntax OID
fdbNewCfgEntryIndex
The fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.1
fdbNewCfgAddVlan
Add vlan for fdb entry index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.2
fdbNewCfgAddPortIndex
The MAC address port number.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.3
fdbNewCfgAddMac
Add a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.4
fdbNewCfgDelStaticEntry
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.5
fdbNewCfgAddTrunk
The MAC address trunk number.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.6
fdbNewCfgAddAdminkey
The MAC address LACP trunk adminkey.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.7
fdbNewCfgAddPortAlias
The MAC address port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.3.1.8

mcastFdbCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.13.8 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mcastFdbCurCfgTable' 
The table of multicast FDB static entries.
mcastFdbCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.13.8.1
A row in the multicast fdb table.
Indexes
No indexes recorded
Column Syntax OID
mcastFdbCurCfgEntryIndex
The multicast fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.8.1.1
mcastFdbCurCfgVlan
Add vlan for multicast fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.8.1.2
mcastFdbCurCfgPorts
The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||…
PortNumber
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.8.1.3
mcastFdbCurCfgMac
Add a multicast fdb entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.8.1.4

mcastFdbNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.13.9 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mcastFdbNewCfgTable' 
The table of multicast FDB static entries.
mcastFdbNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1
A row in the multicast fdb table.
Indexes
No indexes recorded
Column Syntax OID
mcastFdbNewCfgEntryIndex
The multicast fdb entry index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.1
mcastFdbNewCfgAddVlan
Add vlan for multicast fdb entry index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.2
mcastFdbNewCfgPorts
The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.3
mcastFdbNewCfgAddPortIndex
The multicast MAC address port number to be added. A '0'
value is returned when read.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.4
mcastFdbNewCfgRemPortIndex
The multicast MAC address port number to be removed. A '0'
value is returned when read.
PortNumberr/w
Constraints:
range: 0-33
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.5
mcastFdbNewCfgAddMac
Add a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05
SNMPv2-TCMacAddressr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.6
mcastFdbNewCfgDelStaticEntry
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.7
mcastFdbNewCfgAddPortAlias
The multicast MAC address port alias to be added. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.8
mcastFdbNewCfgRemPortAlias
The multicast MAC address port alias to be removed. A '0'
value is returned when read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.13.9.1.9

hotlinksCurCfgTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.14.6 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksCurCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::hotlinksCurCfgTriggerTable' 
The Hot Links Trigger Table.
hotlinksCurCfgTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1
A row in the Hot Links Trigger Table.
Indexes
No indexes recorded
Column Syntax OID
hotlinksCurCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.1
hotlinksCurCfgTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Enumerated Values:
1other
2delete
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.2
hotlinksCurCfgTriggerState
Enable/disable Trigger state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.3
hotlinksCurCfgTriggerPreemptState
Enable/disable Preemption state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.4
hotlinksCurCfgTriggerFdelay
Forward Delay setting (in secs).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.5
hotlinksCurCfgTriggerMasterPortIndex
The master interface port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.6
hotlinksCurCfgTriggerMasterTrunk
The master interface trunk number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.7
hotlinksCurCfgTriggerBackupPortIndex
The backup interface port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.8
hotlinksCurCfgTriggerBackupTrunk
The backup interface trunk number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.9
hotlinksCurCfgTriggerDelete
Delete a Hot Links trigger configuration.
Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.10
hotlinksCurCfgTriggerMasterAdminkey
The master interface admin key number.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.11
hotlinksCurCfgTriggerBackupAdminkey
The backup interface admin key number.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.12
hotlinksCurCfgTriggerMasterPortAlias
The master interface port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.17
hotlinksCurCfgTriggerBackupPortAlias
The backup interface port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.6.1.18

hotlinksNewCfgTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.14.7 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksNewCfgTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::hotlinksNewCfgTriggerTable' 
The Hot Links Trigger Table.
hotlinksNewCfgTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1
A row in the Hot Links Trigger Table.
Indexes
No indexes recorded
Column Syntax OID
hotlinksNewCfgTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.1
hotlinksNewCfgTriggerName
A textual string containing the trigger name.
OctetStringr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.2
hotlinksNewCfgTriggerState
Enable/disable Trigger state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.3
hotlinksNewCfgTriggerPreemptState
Enable/disable Preemption state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.4
hotlinksNewCfgTriggerFdelay
Forward Delay setting (in secs).
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.5
hotlinksNewCfgTriggerMasterPortIndex
The master interface port number.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.6
hotlinksNewCfgTriggerMasterTrunk
The master interface trunk number.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.7
hotlinksNewCfgTriggerBackupPortIndex
The backup interface port number.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.8
hotlinksNewCfgTriggerBackupTrunk
The backup interface trunk number.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.9
hotlinksNewCfgTriggerDelete
Delete a Hot Links trigger configuration.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.10
hotlinksNewCfgTriggerMasterAdminkey
The master interface admin key number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.11
hotlinksNewCfgTriggerBackupAdminkey
The backup interface admin key number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.12
hotlinksNewCfgTriggerMasterPortAlias
The master interface port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.17
hotlinksNewCfgTriggerBackupPortAlias
The backup interface port alias.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.14.7.1.18

lldpCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.15.2 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpCurCfgPortTable' 
The table of LLDP port configuration in the current_configuration
block.
lldpCurCfgPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1
A row in the LLDP port configuration table in the
current_configuration block.
Indexes
No indexes recorded
Column Syntax OID
lldpCurCfgPortIndx
The index of the row in LLDP port configurations table.
PortNumber
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.1
lldpCurCfgPortAdmStat
This is the admin status of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.2
lldpCurCfgPortSnmpTrap
This is the SNMP trap notification state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.3
lldpCurCfgPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.4
lldpCurCfgPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.5
lldpCurCfgPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.6
lldpCurCfgPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.7
lldpCurCfgPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.8
lldpCurCfgPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.9
lldpCurCfgPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.10
lldpCurCfgPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.11
lldpCurCfgPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.12
lldpCurCfgPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
3other
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.13
lldpCurCfgPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.14
lldpCurCfgPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.15
lldpCurCfgPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.16
lldpCurCfgPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.17
lldpCurCfgPortAlias
The alias of the row in LLDP port configurations table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.2.1.20

lldpNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.15.3 · 1 row entry · 19 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpNewCfgPortTable' 
The table of LLDP port configuration in the new_configuration
block.
lldpNewCfgPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1
A row in the LLDP port configuration table in the
new_configuration block.
Indexes
No indexes recorded
Column Syntax OID
lldpNewCfgPortIndx
The index of the row in LLDP port configurations table.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.1
lldpNewCfgPortAdmStat
This is the admin status of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.2
lldpNewCfgPortSnmpTrap
This is the SNMP trap notification state of the LLDP port
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.3
lldpNewCfgPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.4
lldpNewCfgPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.5
lldpNewCfgPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.6
lldpNewCfgPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.7
lldpNewCfgPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.8
lldpNewCfgPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.9
lldpNewCfgPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.10
lldpNewCfgPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.11
lldpNewCfgPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.12
lldpNewCfgPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.13
lldpNewCfgPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.14
lldpNewCfgPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.15
lldpNewCfgPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.16
lldpNewCfgPortalltlv
Set the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.17
lldpNewCfgPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.18
lldpNewCfgPortAlias
The port of the row in LLDP port configurations table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.1.15.3.1.20

vlagCurCfgTrunkTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.18.6 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagCurCfgTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagCurCfgTrunkTable' 
A table of objects of the vLAG groups configured in this
switch.
vlagCurCfgTrunkTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.18.6.1
The configuration objects for an vLAG group.
Indexes
No indexes recorded
Column Syntax OID
vlagCurCfgTrunkIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.18.6.1.1
vlagCurCfgTrunkState
The current administrative state of the vLAG group.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.18.6.1.2

vlagNewCfgTrunkTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.18.7 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagNewCfgTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagNewCfgTrunkTable' 
A table of objects of the vLAG groups configured in this
switch.
vlagNewCfgTrunkTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.18.7.1
The configuration objects for an vLAG group.
Indexes
Column Syntax OID
vlagNewCfgTrunkIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.1.18.7.1.1
vlagNewCfgTrunkState
The new administrative state of the vLAG group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.1.18.7.1.2

vlagCurCfgLacpTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.18.8 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagCurCfgLacpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagCurCfgLacpTable' 
A table of objects of the vLAG groups configured in this
switch.
vlagCurCfgLacpTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.18.8.1
The configuration objects for an vLAG group.
Indexes
No indexes recorded
Column Syntax OID
vlagCurCfgLacpKey
The identifier of the trunk group.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.18.8.1.1
vlagCurCfgLacpState
The current administrative state of the vLAG group.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.1.18.8.1.2

vlagNewCfgLacpTable

table
.1.3.6.1.4.1.26543.2.7.4.2.1.18.9 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagNewCfgLacpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagNewCfgLacpTable' 
A table of objects of the vLAG groups configured in this
switch.
vlagNewCfgLacpTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.1.18.9.1
The configuration objects for an vLAG group.
Indexes
No indexes recorded
Column Syntax OID
vlagNewCfgLacpKey
The identifier of the trunk group.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.1.18.9.1.1
vlagNewCfgLacpState
The new administrative state of the vLAG group.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.26543.2.7.4.2.1.18.9.1.2

stgStatsPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stgStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stgStatsPortTable' 
The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1
Statistics about port of a particular Spanning Tree Group.
Indexes
No indexes recorded
Column Syntax OID
stgStatsStpIndex
The identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.1
stgStatsPortIndex
The port identifier of a particular Spanning Tree Group.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.2
stgStatsPortRcvBpdus
Number of total BPDU's received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.3
stgStatsPortRcvTcnBpdus
Number of TCN BPDU's received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.4
stgStatsPortLastTcnRcv
Time of last TCN BPDU's received on this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.5
stgStatsPortXmtBpdus
Number of total BPDU's transmitted on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.6
stgStatsPortXmtTcnBpdus
Number of TCN BPDU's trasmitted from the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.7
stgStatsPortLastTcnXmt
Time of last TCN BPDU's transmitted on this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.8
stgStatsPortDropBpdus
Number of total BPDU's dropped on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.9
stgStatsPortAlias
The port alias of a particular Spanning Tree Group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.2.1.1.10

lacpStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.4.1 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpStatsTable' 
The table of LACP Stats.
lacpStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1
Lacp status info.
Indexes
No indexes recorded
Column Syntax OID
lacpStatsIndex
Index
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.1
lacpdusRx
Valid LACPDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.2
markerpdusRx
Valid Marker PDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.3
markerresponsepdusRx
Valid Marker Rsp PDUs received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.4
unknownRx
Unknown version/TLV type
SNMPv2-SMIInteger32
Enumerated Values:
1ok
2clear
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.5
illegalRx
Illegal subtype received
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.6
lacpdusTx
LACPDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.7
markerpdusTx
Market PDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.8
markerresponsepdusTx
Marker Rsp PDUs transmitted
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.9
lacpClearStats
Setting this to clear(2) results in clearing the LACP statistics.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.10
lacpStatsPortAlias
Port Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.4.1.1.11

hotlinksStatsTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.6.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksStatsTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::hotlinksStatsTriggerTable' 
The Hot Links Trigger Table Stats.
hotlinksStatsTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1
A row in the Hot Links Trigger Table Stats.
Indexes
No indexes recorded
Column Syntax OID
hotlinksStatsTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.1
hotlinksStatsTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.2
hotlinksStatsTriggerMasterActive
The number of times the master interface was set to active.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.3
hotlinksStatsTriggerBackupActive
The number of times the backup interface was set to active.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.4
hotlinksStatsTriggerFdbUpdate
The number of times an FDB update was performed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.5
hotlinksStatsTriggerFdbFailed
The number of times an FDB update failed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.6.1.1.6

lldpStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.7.2 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpStatsTable' 
The table of LLDP statistics.
lldpStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1
LLDP statistics info.
Indexes
No indexes recorded
Column Syntax OID
lldpStatsIndex
The index of the row in LLDP port statistics.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.1
lldpStatsFramesOutTotal
The total number of LLDP frames transmitted in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.2
lldpStatsFramesInTotal
The total number of LLDP frames received in this port.
SNMPv2-SMICounter32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.3
lldpStatsFramesInErrorsTotal
The total number of erroneous LLDP frames received in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.4
lldpStatsFramesDiscardedTotal
The total number of received LLDP frames discarded in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.5
lldpStatsTLVsUnrecognizedTotal
The total number of unrecognized TLVs in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.6
lldpStatsAgeoutsTotal
The total number of neighbor's information deleted in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.7
lldpStatsClear
Setting this to clear(2) results in clearing the LLDP statistics.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.8
lldpStatsPortAlias
The alias of the row in LLDP port statistics.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.7.2.1.9

oamStatsPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.8.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk oamStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::oamStatsPortTable' 
The table of OAM port statistics.
oamStatsPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1
Statistics about OAM Port
Indexes
No indexes recorded
Column Syntax OID
oamStatsPortIndex
The OAM Port number for which the table is related.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.1
oamStatsPortInfoTx
The number of transmitted OAM information packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.2
oamStatsPortInfoRx
The number of received OAM information packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.3
oamStatsPortUnsupTx
The number of transmitted OAM unsupported packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.4
oamStatsPortUnsupRx
The number of received OAM unsupported packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.5
oamStatsPortLocalLinkFaults
The number of local OAM link fault packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.6
oamStatsPortLocalCriticalEvents
The number of local OAM critical event packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.7
oamStatsPortLocalDyingGasps
The number of local OAM dying gasp packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.8
oamStatsPortRemoteLinkFaults
The number of remote OAM link fault packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.9
oamStatsPortRemoteCriticalEvents
The number of remote OAM critical event packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.10
oamStatsPortRemoteDyingGasps
The number of remote OAM dying gasp packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.11
oamStatsPortAlias
The alias of the row in OAM Stats port configuration table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.8.1.1.12

slpStatsTxCountersTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.12.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsTxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::slpStatsTxCountersTable' 
A table with all the SLP Send counters.
slpStatsTxCounterEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.12.1.1
The configuration objects for a SLP Send counter entry.
Indexes
No indexes recorded
Column Syntax OID
slpTxCounterIndex
The index of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.1.1.1
slpTxCounterName
The name of this counter.
OctetString
Enumerated Values:
1unknown
2forward
3trunk
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.1.1.2
slpTxCounterUnicast
The unicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.1.1.3
slpTxCounterMulticast
The multicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.1.1.4

slpStatsRxCountersTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.12.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpStatsRxCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::slpStatsRxCountersTable' 
A table with all the SLP Receive counters.
slpStatsRxCounterEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.12.2.1
The configuration objects for a SLP Receive counter entry.
Indexes
No indexes recorded
Column Syntax OID
slpRxCounterIndex
The index this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.2.1.1
slpRxCounterName
The name of this counter.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.2.12.2.1.2
slpRxCounterUnicast
The unicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.2.1.3
slpRxCounterMulticast
The multicast value of this counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.2.12.2.1.4

cistStatsPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.2.13.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cistStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::cistStatsPortTable' 
The table of Common and Internal Spanning Tree port statistics.
cistStatsPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1
Statistics about port of Common and Internal Spanning Tree.
Indexes
No indexes recorded
Column Syntax OID
cistStatsPortIndex
The port identifier of CIST.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.1
cistStatsPortRcvBpdus
Number of BPDU's received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.2
cistStatsPortRcvTcnBpdus
Number of TCN BPDU's received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.3
cistStatsPortLastTcnRcv
Time of Last TCN BPDU's received on this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.4
cistStatsPortXmtBpdus
Number of BPDU's transmitted from the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.5
cistStatsPortXmtTcnBpdus
Number of TCN BPDU's transmitted from the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.6
cistStatsPortLastTcnXmt
Time of Last TCN BPDU's transmitted from this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.7
cistStatsPortDropBpdus
Number of BPDU's dropped on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.2.13.1.1.8

fdbTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fdbTable' 
The table of FDB entries.
fdbEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1
A row in the FDB table
Indexes
No indexes recorded
Column Syntax OID
fdbMacAddr
The MAC address for the FDB entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.1
fdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.2
fdbSrcPortIndex
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.3
fdbState
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.4
fdbSrcTrunk
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.7
fdbStatus
'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.8
fdbSrcPortAlias
Either the value '0', or the port alias of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been le…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.2.1.9

mcastFdbTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mcastFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mcastFdbTable' 
The table of static multicast FDB entries.
mcastFdbEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.1.3.1
A row in the static multicast FDB table
Indexes
No indexes recorded
Column Syntax OID
mcastFdbEntryIndex
The static multicast fdb entry index
SNMPv2-SMIInteger32
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
8na
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.3.1.1
mcastFdbMacAddr
The static multicast MAC address for the FDB entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.3.1.2
mcastFdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.1.3.1.3
mcastFdbSrcPorts
The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||…
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.1.3.1.4

stpInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stpInfoTable' 
The table of Spanning Tree Group information.
stpInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1
Information about a particular Spanning Tree Group.
Indexes
No indexes recorded
Column Syntax OID
stpInfoIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.1
stpInfoTimeSinceTopChange
The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.
SNMPv2-SMITimeTicks
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.2
stpInfoTopChanges
The total number of topology changes detected by this bridge since
the management entity was last reset or initialized.
SNMPv2-SMICounter32
Enumerated Values:
1p2p
2shared
3unknown
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.3
stpInfoDesignatedRoot
The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs origi…
BRIDGE-MIBBridgeId
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 8
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.4
stpInfoRootCost
The cost of the path to the root as seen from this bridge.
SNMPv2-SMIInteger32
Enumerated Values:
0normal
1loop-inc
2root-inc
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.5
stpInfoRootPortIndex
The port number of the port which offers the lowest cost path from
this bridge to the root bridge.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.6
stpInfoMaxAge
The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.7
stpInfoHelloTime
The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.8
stpInfoForwardDelay
This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.9
stpInfoHoldTime
This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.10
stpInfoPreRoot
This is previous root bridge before current root bridge selected.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.11
stpInfoPreRootPort
This is previous root port before current root port selected.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.12
stpInfoRootReplaceTime
This is Time of new root bridge replacing old root bridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.13
stpInfoRootPortAlias
The port alias of the port which offers the lowest cost path from
this bridge to the root bridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.1.1.14

stpInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.2.2 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk stpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::stpInfoPortTable' 
The table of Spanning Tree Group port information.
stpInfoPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1
Information about port configuration for a particular Spanning Tree
Group.
Indexes
No indexes recorded
Column Syntax OID
stpInfoPortStpIndex
The identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.1
stpInfoPortIndex
The port identifier of a particular Spanning Tree Group.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.2
stpInfoPortState
The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it wil…
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.3
stpInfoPortDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.4
stpInfoPortDesignatedCost
The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.5
stpInfoPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.6
stpInfoPortDesignatedPort
The Port Identifier of the port on the Designated Bridge for this
port's segment.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.7
stpInfoPortForwardTransitions
The number of times this port has transitioned from the Learning
state to the Forwarding state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.8
stpInfoPortPathCost
The path cost of the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.9
stpInfoPortRole
The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.10
stpInfoPortLinkType
The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this …
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.11
stpInfoPortEdge
The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.12
stpInfoPortExtGuard
Current STP guard state. Not include BPDU Guard.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.13
stpInfoPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.14
stpInfoPortAlias
The port alias of a particular Spanning Tree Group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.2.2.1.15

lacpInfoAggrTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.3.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpInfoAggrTable' 
The table of LACP aggregator information.
lacpInfoAggrTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1
Information about a LACP aggregator.
Indexes
No indexes recorded
Column Syntax OID
lacpInfoAggrIndex
The aggregator identifier.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.1
lacpInfoAggrId
LACP aggregator ID
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.2
lacpInfoAggrMac
LACP aggregator MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.3
lacpInfoAggrActSysPrio
LACP aggregator actor system priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.4
lacpInfoAggrActSysId
LACP aggregator actor system ID
SNMPv2-TCDisplayString
Enumerated Values:
1true
2false
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.5
lacpInfoAggrIndivState
LACP aggregator individual state
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.6
lacpInfoAggrActAdminKey
LACP aggregator actor admin key
SNMPv2-SMIInteger32
Enumerated Values:
1selected
2unselected
3standby
4suspended
5individual
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.7
lacpInfoAggrActOperKey
LACP aggregator actor oper key
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.8
lacpInfoAggrPartSysPrio
LACP aggregator partner system priority
SNMPv2-SMIInteger32
Enumerated Values:
1on
2off
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.9
lacpInfoAggrPartSysId
LACP aggregator partner system ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.10
lacpInfoAggrPartOperKey
LACP aggregator partner oper key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.11
lacpInfoAggrReadyState
LACP aggregator ready state
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.12
lacpInfoAggrNumPorts
Number of ports in aggregator
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.13
lacpInfoAggrMinLinks
Min Links of ports in aggregator
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.1.1.15

lacpInfoPortGeneralTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpInfoPortGeneralTable' 
The table of LACP port general information.
lacpInfoPortGeneralTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1
General information about a LACP port.
Indexes
No indexes recorded
Column Syntax OID
lacpInfoPortGeneralIndex
The port identifier.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.1
lacpInfoPortLacpEna
LACP enabled on port
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.2
lacpInfoPortAdminEna
LACP port admin enabled
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.3
lacpInfoPortActSysId
LACP port actor system ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.4
lacpInfoPortActSysPrio
LACP port actor system priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.5
lacpInfoPortActAdminKey
LACP port actor admin key
SNMPv2-SMIInteger32
Enumerated Values:
1active
2passive
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.6
lacpInfoPortActOperKey
LACP port actor oper key
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.7
lacpInfoPortActPortNum
LACP port number
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.8
lacpInfoPortActPortPrio
LACP port priority
SNMPv2-SMIInteger32
Enumerated Values:
1short
2long
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.9
lacpInfoPortIndivState
LACP port individual state
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.10
lacpInfoSelAggrId
LACP port selected aggregator ID
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.11
lacpInfoAttAggrId
LACP port attached aggregator ID
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.12
lacpInfoPortReadyN
True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.13
lacpInfoPortNtt
Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.14
lacpInfoPortSelected
Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.15
lacpInfoPortMoved
Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.16
lacpInfoCollDetState
LACP port collision and detection state
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.17
lacpInfoPortRxState
LACP port RX machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.18
lacpInfoPortMuxState
LACP port Mux machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.19
lacpInfoPortPerState
LACP port periodic machine state
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.20
lacpInfoPortPerTraTimer
Periodic Transmit Timer
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.21
lacpInfoPortCurWhileTimer
Current While Timer
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.22
lacpInfoPortOperState
The current operational state of LACP on the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.23
lacpInfoPortGeneralPortAlias
The port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1active
2passive
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.24
lacpInfoPortActPortAlias
LACP port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1true
2false
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.1.1.25

lacpInfoPortAdminTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpInfoPortAdminTable' 
The table of LACP port admin information.
lacpInfoPortAdminTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1
Admin information about a LACP port.
Indexes
No indexes recorded
Column Syntax OID
lacpInfoPortAdminIndex
The port identifier.
PortNumber
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.1
lacpInfoPortActAdPortState
The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state…
SNMPv2-TCDisplayString
Enumerated Values:
1true
2false
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.7
lacpInfoPortActAdActiv
The state of Actor Administrator Port Activity
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.8
lacpInfoPortActAdSync
The state of Actor Administrator Port Synchronization
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.9
lacpInfoPortActAdDef
The state of Actor Administrator Port Defaulted
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.10
lacpInfoPortActAdTimeout
The state of Actor Administrator Port Timeout
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.11
lacpInfoPortActAdColl
The state of Actor Administrator Port Collecting
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.12
lacpInfoPortActAdExp
The state of Actor Administrator Port Expired
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.13
lacpInfoPortActAdAggr
The state of Actor Administrator Port Aggregation
Enumeration
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.14
lacpInfoPortActAdDist
The state of Actor Administrator Port Distributing
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.15
lacpInfoPortAdminPortAlias
The port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1true
2false
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.2.1.25

lacpInfoPortOperTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lacpInfoPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lacpInfoPortOperTable' 
The table of LACP port oper information.
lacpInfoPortOperTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1
Oper information about a LACP port.
Indexes
No indexes recorded
Column Syntax OID
lacpInfoPortOperIndex
The port identifier.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.1
lacpInfoPortPartOpSysPrio
The value of Partner Operator Port System Priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.2
lacpInfoPortPartOpSysId
The value of Partner Operator Port System ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.3
lacpInfoPortPartOpKey
The value of Partner Operator Port Key
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.4
lacpInfoPortPartOpPortNum
The Partner Operator Port Number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.5
lacpInfoPortPartOpPortPrio
The value of Partner Operator Port Priority
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.6
lacpInfoPortActOpPortState
The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is s…
SNMPv2-TCDisplayString
Enumerated Values:
1disabled
2discarding
4learning
5forwarding
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.7
lacpInfoPortActOpActiv
The state of Actor Operator Port Activity
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.8
lacpInfoPortActOpSync
The state of Actor Operator Port Synchronization
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.9
lacpInfoPortActOpDef
The state of Actor Operator Port Defaulted
Enumeration
Constraints:
range: 2-2
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.10
lacpInfoPortActOpTimeout
The state of Actor Operator Port Timeout
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.11
lacpInfoPortActOpColl
The state of Actor Operator Port Collecting
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.12
lacpInfoPortActOpExp
The state of Actor Operator Port Expired
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.13
lacpInfoPortActOpAggr
The state of Actor Operator Port Aggregation
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.14
lacpInfoPortActOpDist
The state of Actor Operator Port Distributing
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.15
lacpInfoPortPartOpPortState
The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.16
lacpInfoPortPartOpActiv
The state of Partner Operator Port Activity
Enumeration
Constraints:
range: 1-4090
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.17
lacpInfoPortPartOpSync
The state of Partner Operator Port Synchronization
Enumeration
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.18
lacpInfoPortPartOpDef
The state of Partner Operator Port Defaulted
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.19
lacpInfoPortPartOpTimeout
The state of Partner Operator Port Timeout
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.20
lacpInfoPortPartOpColl
The state of Partner Operator Port Collecting
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.21
lacpInfoPortPartOpExp
The state of Partner Operator Port Expired
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.22
lacpInfoPortPartOpAggr
The state of Partner Operator Port Aggregation
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.23
lacpInfoPortPartOpDist
The state of Partner Operator Port Distributing
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.24
lacpInfoPortOperPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.3.2.3.1.25

cistInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.4.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cistInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::cistInfoPortTable' 
The table of CIST Port information.
cistInfoPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1
Information about a particular CIST Port.
Indexes
No indexes recorded
Column Syntax OID
cistInfoPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.1
cistInfoPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.2
cistInfoPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.3
cistInfoPortState
Current state of the Port as defined by the Common
spanning tree protocol.
Enumeration
Enumerated Values:
0down
1blocking
2forwarding
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.4
cistInfoPortRole
Selected Port Role of the port for this spanning tree instance.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.5
cistInfoPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.6
cistInfoPortDesignatedPort
The Port identifier of the port on the Designated Bridge
for this port's segment.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.7
cistInfoPortLinkType
The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that thi…
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.8
cistInfoPortHelloTime
CIST port Hello Time
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.9
cistInfoPortEdge
The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.10
cistRootInfoPortAlias
The port alias of the port for which this entry contains spanning
tree configuration.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.4.2.1.11

vlanInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlanInfoTable' 
The table of VLAN information.
vlanInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.5.1.1
Information about a particular VLAN.
Indexes
No indexes recorded
Column Syntax OID
vlanInfoId
The VLAN identifier.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.3.5.1.1.1
vlanInfoName
The VLAN name.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.5.1.1.2
vlanInfoStatus
Enable or disable, VLAN state information
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.5.1.1.3
vlanInfoPorts
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.2.3.5.1.1.7

trunkGroupInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkGroupInfoTable' 
The table of trunk group information.
trunkGroupInfoTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.9.1.1
A row in trunk group information table.
Indexes
No indexes recorded
Column Syntax OID
trunkGroupInfoIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.1.1.1
trunkGroupInfoState
Trunk group state.
Enumeration
Enumerated Values:
1enabledTxOnly
2enabledRxOnly
3enabledRxTx
4disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.1.1.2
trunkGroupInfoPorts
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
…
OctetString
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.1.1.3
trunkGroupInfoProtocol
Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.1.1.4

trunkGroupInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.9.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk trunkGroupInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::trunkGroupInfoPortTable' 
The table of Trunk Group Info.
trunkGroupInfoPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.9.2.1
A row in the Trunk Info table.
Indexes
No indexes recorded
Column Syntax OID
trunkGroupInfoPortTrunkId
The Trunk identifier.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.2.1.1
trunkGroupInfoPortPortId
The Port identifier.
PortNumber
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.2.1.2
trunkGroupInfoPortStatus
The Port Status.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.2.1.3
trunkGroupInfoPortAlias
The Port alaias.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.9.2.1.4

hotlinksInfoTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.10.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hotlinksInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::hotlinksInfoTriggerTable' 
The Hot Links Trigger Table Info.
hotlinksInfoTriggerTableEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1
A row in the Hot Links Trigger Table Info.
Indexes
No indexes recorded
Column Syntax OID
hotlinksInfoTriggerId
The Trigger identifier.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.1
hotlinksInfoTriggerName
A textual string containing the trigger name.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.2
hotlinksInfoTriggerState
Enable/disable Trigger state info.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.3
hotlinksInfoTriggerPreemptState
Enable/disable Preemption state info.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.4
hotlinksInfoTriggerFdelay
Forward Delay setting info (in secs).
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.5
hotlinksInfoTriggerActive
A textual string containing the active interface info.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.10.3.1.6

lldpInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.11.1 · 1 row entry · 21 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpInfoPortTable' 
The table of LLDP Port Info.
lldpInfoPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1
LLDP Port Info.
Indexes
No indexes recorded
Column Syntax OID
lldpInfoPortIndex
The index of the row in LLDP info port table.
PortNumber
Enumerated Values:
1txLldpInitialize
2txIdle
3txShutdownFrame
4txInfoFrame
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.1
lldpInfoPortAlias
The port alias of the port in LLDP info port table.
OctetString
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.2
lldpInfoPortMacAddress
The mac address of the port in LLDP info port table.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.3
lldpInfoPortMtu
The MTU size of the port in LLDP info port table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.4
lldpInfoPortEnabled
The PortEnabled field of the port in LLDP info port table.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.5
lldpInfoPortAdminStatus
The Admin Status of the port in LLDP info port table.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.6
lldpInfoPortRxChanges
The rxChanges field of the port in LLDP info port table.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.7
lldpInfoPortportdesctlv
This is the Port Description TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.8
lldpInfoPortsysnametlv
This is the System Name TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.9
lldpInfoPortsysdescrtlv
This is the System Description TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.10
lldpInfoPortsyscaptlv
This is the System Capabilities TLV state of the LLDP port.
Enumeration
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.11
lldpInfoPortmgmtaddrtlv
This is the Management Address TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.12
lldpInfoPortportvidtlv
This is the Port VLAN ID TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.13
lldpInfoPortportprottlv
This is the Port and Protocol VLAN ID TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.14
lldpInfoPortvlannametlv
This is the VLAN Name TLV state of the LLDP port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.15
lldpInfoPortprotidtlv
This is the Protocol Identity TLV state of the LLDP port.
Enumeration
Enumerated Values:
1lldpWaitPortOperational
2deleteAgedInfo
3rxLldpInitialize
4rxWaitForFrame
5rxFrame
6deleteInfo
7updateInfo
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.16
lldpInfoPortmacphytlv
This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.17
lldpInfoPortpowermditlv
This is the Power Via MDI TLV state of the LLDP port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.18
lldpInfoPortlinkaggrtlv
This is the Link Aggregation TLV state of the LLDP port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.19
lldpInfoPortframesztlv
This is the Maximum Frame Size TLV state of the LLDP port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.20
lldpInfoPortdcbxtlv
This is the DCBX TLV state of the LLDP port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.1.1.21

lldpInfoTxTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.11.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoTxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpInfoTxTable' 
The table of LLDP Transmit State Machine Info.
lldpInfoTxEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1
LLDP Transmit State Machine Info.
Indexes
No indexes recorded
Column Syntax OID
lldpInfoTxIndex
The index of the row in LLDP Transmit State Machine info table.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.1
lldpInfoTxState
The transmit state of the port in LLDP Transmit State Machine.
Enumeration
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.2
lldpInfoTxLocalChanged
The somethingChangedLocal field of the port in LLDP Transmit
State Machine.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.3
lldpInfoTxTTL
The txTTL timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.4
lldpInfoTxTxTTR
The txTTR timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.5
lldpInfoTxDelayWhile
The txDelayWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Constraints:
range: 1-256
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.6
lldpInfoTxShutdownWhile
The txShutdownWhile timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.7
lldpInfoTxReinitDelay
The reinitDelay timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Enumerated Values:
1true
2false
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.8
lldpInfoTxHoldMultiplier
The msgTxHold timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.9
lldpInfoTxTransmitInterval
The msgTxInterval timer of the port in LLDP Transmit State
Machine.
SNMPv2-SMIInteger32
Enumerated Values:
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7locallyAssigned
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.10
lldpInfoTxTransmitDelay
The txDelay timer of the port in LLDP Transmit State Machine.
SNMPv2-SMIInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.11
lldpInfoTxDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Enumerated Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7locallyAssigned
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.12
lldpInfoTxPortAlias
The alias of the row in LLDP Transmit State Machine info table.
SNMPv2-TCDisplayString
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.2.1.13

lldpInfoRxTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.11.3 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpInfoRxTable' 
The table of LLDP Receive State Machine Info.
lldpInfoRxEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1
LLDP Receive State Machine Info.
Indexes
No indexes recorded
Column Syntax OID
lldpInfoRxIndex
The index of the row in LLDP Receive State Machine info table.
PortNumber
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.1
lldpInfoRxState
The receive state of the port in LLDP Receive State Machine.
Enumeration
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.2
lldpInfoRxBadFrame
The badFrame field of the port in LLDP Receive State Machine.
Enumeration
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.3
lldpInfoRxRcvFrame
The rcvFrame field of the port in LLDP Receive State Machine.
Enumeration
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.4
lldpInfoRxRxInfoAge
The rxInfoAge field of the port in LLDP Receive State Machine.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.5
lldpInfoRxRemoteChanged
The somethingChangedRemote field of the port in LLDP Receive
State Machine.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.6
lldpInfoRxTooManyNeighbors
The tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Enumerated Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6all802
7e163
8e164
9f69
10x121
11ipx
12appletalk
13decnetIV
14banyanVines
15e164withNsap
16dns
17distinguishedname
18asnumber
19xtpoveripv4
20xtpoveripv6
21xtpnativemodextp
65535reserved
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.7
lldpInfoRxSNMPNotify
The tooManyNeighbors field of the port in LLDP Receive
State Machine.
Enumeration
Constraints:
range: 1-64
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.8
lldpInfoRxRxTTL
The rxTTL timer of the port in LLDP Receive State Machine.
SNMPv2-SMIInteger32
Enumerated Values:
1unknown
2ifIndex
3systemPortNumber
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.9
lldpInfoRxTooManyNeighborTimer
The tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.10
lldpInfoRxDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.11
lldpInfoRxPortAlias
The alias of the row in LLDP Receive State Machine info table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.3.1.12

lldpInfoRemoteDevicesTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.11.4 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesTable' 
The table of LLDP remote devices Info.
lldpInfoRemoteDevicesEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1
LLDP remote devices Info.
Indexes
No indexes recorded
Column Syntax OID
lldpInfoRemoteDevicesIndex
The index of the row in LLDP remote devices info table.
Integer32
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.1
lldpInfoRemoteDevicesRemoteTTL
The remote TTL of the LLDP remote devices entry.
SNMPv2-SMIInteger32
Enumerated Values:
0active
1passive
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.3
lldpInfoRemoteDevicesRxChanges
The rxChanges field of the LLDP remote devices entry.
Enumeration
Enumerated Values:
0ok
1fail
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.4
lldpInfoRemoteDevicesLocalPort
The local port alias of the LLDP remote devices entry.
OctetString
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.5
lldpInfoRemoteDevicesChassisSubtype
The chassis ID subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.6
lldpInfoRemoteDevicesChassisId
The chassis ID of the LLDP remote devices entry.
OctetString
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.7
lldpInfoRemoteDevicesPortSubtype
The port ID subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
0active
1passive
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.8
lldpInfoRemoteDevicesPortId
The port ID of the LLDP remote devices entry.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.9
lldpInfoRemoteDevicesSystemName
The system name of the LLDP remote devices entry.
OctetString
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.10
lldpInfoRemoteDevicesSystemDescription
The system description of the LLDP remote devices entry.
OctetString
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.11
lldpInfoRemoteDevicesPortDescription
The port description of the LLDP remote devices entry.
OctetString
Enumerated Values:
0true
1false
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.12
lldpInfoRemoteDevicesSystemCapSupported
The supported system capabilities of the LLDP remote devices entry.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.13
lldpInfoRemoteDevicesSystemCapEnabled
The enabled system capabilities of the LLDP remote devices entry.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.14
lldpInfoRemoteDMAC
The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.11.4.1.15

lldpInfoRemoteDevicesManAddrTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.11.5 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk lldpInfoRemoteDevicesManAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesManAddrTable' 
The table of LLDP remote devices management address Info.
lldpInfoRemoteDevicesManAddrEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1
LLDP remote devices management address Info.
Indexes
No indexes recorded
Column Syntax OID
lldpInfoRemoteDevicesManAddrSubtype
The management address subtype of the LLDP remote devices entry.
Enumeration
Enumerated Values:
1aggresive
2normal
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1.1
lldpInfoRemoteDevicesManAddr
The management address of the LLDP remote devices entry.
OctetString
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1.2
lldpInfoRemoteDevicesManAddrIfSubtype
The interface numbering subtype of the LLDP remote devices
management address entry.
Enumeration
Enumerated Values:
1init
2inactive
3linkup
4advertisement
5detection
6extDetection
7shutdown
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1.3
lldpInfoRemoteDevicesManAddrIfId
The interface number of the LLDP remote devices management address
entry.
SNMPv2-SMIInteger32
Enumerated Values:
1unknown
2unidirectional
3bidirectional
4loop
5neighborMismatch
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1.4
lldpInfoRemoteDevicesManAddrOID
The object identifier of the LLDP remote devices management address
entry.
OctetString .1.3.6.1.4.1.26543.2.7.4.2.3.11.5.1.5

oamInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.12.1 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk oamInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::oamInfoPortTable' 
The table of OAM port information.
oamInfoPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1
Information about OAM Port
Indexes
No indexes recorded
Column Syntax OID
oamInfoPortIndex
The OAM Port number for which the table is related.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.1
oamInfoPortLocalState
OAM local port state
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.2
oamInfoPortLocalMode
OAM local port mode
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.3
oamInfoPortLocalLinkStatus
OAM local port link status
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.4
oamInfoPortLocalStable
OAM local port stable
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.5
oamInfoPortLocalSatisfied
OAM local port satisfied
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.6
oamInfoPortLocalEvaluating
OAM local port evaluating
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.7
oamInfoPortRemoteMode
OAM remote port mode
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.8
oamInfoPortRemoteMAC
OAM remote port MAC address
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.9
oamInfoPortRemoteStable
OAM remote port stable
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.10
oamInfoPortRemoteStateValid
OAM remote port state valid
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.11
oamInfoPortRemoteEvaluating
OAM remote port evaluating
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.12
oamInfoPortAlias
The alias of the row in OAM Info port configuration table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.12.1.1.13

udldInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.13.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udldInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::udldInfoPortTable' 
The table of UDLD port info.
udldInfoPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1
A row inside UDLD port info table.
Indexes
No indexes recorded
Column Syntax OID
udldInfoPortIndex
The index of the row in UDLD port configuration table.
PortNumber
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.1
udldInfoPortConfig
The Config field of the port in UDLD port info table.
Shows the administative state of the current port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.2
udldInfoPortMode
The Mode field of the port in UDLD info port table.
Shows the udld administrative mode for the current port.
Enumeration
Enumerated Values:
1auto-controlled
2auto-disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.3
udldInfoPortLink
The Link field of the port in UDLD info port table.
Shows the state of the link associated with the port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.4
udldInfoPortOperationalStatus
The OperationalStatus field of the port in UDLD info port table.
Contains the udld operational state for the current port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.5
udldInfoPortBidirectionalStatus
The BidirectionalStatus field of the port in UDLD info port table.
Contains the udld bidirectional state for the current port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.6
udldInfoPortInterval
The Interval field of the port in UDLD info port table.
The duration, measured in seconds, of the interval during which
UDLD probes are sent, after the linkup or detection phases.
Its time unit is 1 second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.7
udldInfoPortTimeout
The Timeout field of the port in UDLD info port table.
Length of the detection phase, measured in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.8
udldInfoPortNeighborCount
The Neighbor field of the port in UDLD info port table.
Contains the number of udld neighbors for the current port.
SNMPv2-SMIInteger32
Enumerated Values:
0failed
1operational
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.9
udldInfoPortAlias
The alias of the row in UDLD port configuration table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.1.1.10

udldInfoNeighborTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.13.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk udldInfoNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::udldInfoNeighborTable' 
The table of UDLD port neighbor info.
udldInfoNeighborEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1
A row inside UDLD port info table.
Indexes
Column Syntax OID
udldInfoNeighborLocalPortIndex
The index of the port for which neighbor information
will be returned.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.1
udldInfoNeighborIndex
The index of the target neighbor among the port neighbors.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.2
udldInfoNeighborExpiration
Hold time for the given neighbor.
SNMPv2-SMIInteger32
Enumerated Values:
0failed
1operational
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.3
udldInfoNeighborDeviceName
Device name reported by neigbor.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.4
udldInfoNeighborDeviceID
Device ID reported by neigbor.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.5
udldInfoNeighborPortID
Port ID reported by neigbor.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.6
udldInfoNeighborLocalPortAlias
The alias of the port for which neighbor information
will be returned.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.13.2.1.7

failoverInfoTriggerTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.14.3 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::failoverInfoTriggerTable' 
This table holds the information for individual triggers
failoverInfoTriggerEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1
A row in the failover trigger table.
Indexes
No indexes recorded
Column Syntax OID
failoverInfoTriggerId
The trigger identifier.
SNMPv2-SMIInteger32
Enumerated Values:
1down
2localUp
3remoteUp
4formed
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.1
failoverInfoTriggerState
The trigger state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.2
failoverInfoTriggerLimit
Limit number of operational links
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.3
failoverInfoTriggerMonitorState
The runtime monitor state
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.4
failoverInfoTriggerMonitorPorts
The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.5
failoverInfoTriggerControlState
The runtime control state
Enumeration
Enumerated Values:
1init
2master
3backup
4holdoff
5unknown
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.6
failoverInfoTriggerControlPorts
The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString
Enumerated Values:
1init
2master
3backup
4holdoff
5unknown
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.3.1.7

failoverInfoMonPortStateTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.14.4 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoMonPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::failoverInfoMonPortStateTable' 
This table holds the information for individual triggers
failoverInfoTriggerMonPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.14.4.1
A row in the failover trigger table.
Indexes
Column Syntax OID
failoverInfoTriggerMonId
The trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.4.1.1
failoverInfoTriggerMonPortId
The Port identifier.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.14.4.1.2
failoverInfoTriggerMonPortStatus
The Port Status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.14.4.1.3
failoverInfoTriggerMonPortAlias
The Port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.4.1.4

failoverInfoCtlPortStateTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.14.5 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk failoverInfoCtlPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::failoverInfoCtlPortStateTable' 
This table holds the information for individual triggers
failoverInfoTriggerCtlPortEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.14.5.1
A row in the failover trigger table.
Indexes
No indexes recorded
Column Syntax OID
failoverInfoTriggerCtlId
The trigger identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.5.1.1
failoverInfoTriggerCtlPortId
The Port identifier.
PortNumber .1.3.6.1.4.1.26543.2.7.4.2.3.14.5.1.2
failoverInfoTriggerCtlPortStatus
The Port Status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.14.5.1.3
failoverInfoTriggerCtlPortAlias
The Port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.14.5.1.4

vlagInfoInstanceTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagInfoInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagInfoInstanceTable' 
A table of objects of the running vLAG instances.
vlagInfoInstanceEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1.1
The configuration objects for an vLAG group.
Indexes
No indexes recorded
Column Syntax OID
vlagInstanceId
The identifier of this instance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1.1.1
vlagInstanceTrunkId
The trunk id of this vLAG instance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1.1.2
vlagInstanceAdminKey
AdminKey of this vLAG instance. Applicable only incase of
dynamic trunks.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1.1.3
vlagInstanceState
The current running state of the vLAG instance.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.16.2.1.1.4

vlagInfoVrrpTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vlagInfoVrrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vlagInfoVrrpTable' 
The table of vLAG-enabled VRRP virtual router run-time information.
vlagInfoVrrpEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1.1
The run-time information about a vLAG-enabled VRRP virtual router.
Indexes
No indexes recorded
Column Syntax OID
vlagVrrpVirtRtrIndex
The vLAG-enabled VRRP virtual router index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1.1.1
vlagVrrpVirtRtrID
The vLAG-enabled VRRP virtual router identifier.
Integer32 .1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1.1.2
vlagVrrpVirtRtrLocalState
The vLAG-enabled VRRP virtual router local state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1.1.3
vlagVrrpVirtRtrPeerState
The vLAG-enabled VRRP virtual router peer state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.2.3.16.3.1.1.4

ecpChnlInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.17.1 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ecpChnlInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ecpChnlInfoTable' 
The table of ECP channel Info.
ecpChnlInfoEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1
Information about ECP channel.
Indexes
No indexes recorded
Column Syntax OID
ecpChnlInfoEntryIndex
The index of the ecp chnl info table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.1
ecpChnlPortIndex
The ecp channel port info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.2
ecpChnlStag
The ecp channel stag info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.3
ecpChnlSndlen
The ecp channel send length info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.4
ecpChnlSndnxt
The ecp channel send next info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.5
ecpChnlRcvlast
The ecp channel recv last sequence info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.6
ecpChnlStateMachine
The ecp channel state machineinfo.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.7
ecpChnlRxCnt
The ecp channel Rx count info.
SNMPv2-SMIInteger32
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.8
ecpChnlTxCnt
The ecp channel Tx count info.
SNMPv2-SMIInteger32
Constraints:
range: 0-15
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.9
ecpChnlRxDrop
The ecp channel RxDrop info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.10
ecpChnlTxDrop
The ecp channel TxDrop info.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.11
ecpChnlState
The ecp channel state info.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.12
ecpChnlAckErr
The ecp channel ACK error info.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.13
ecpChnlPortAlias
The ecp channel port alias info.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.2.3.17.1.1.14

slpInfoListeningIPInterfaceTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.18.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoListeningIPInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::slpInfoListeningIPInterfaceTable' 
A table with all the SLP listening IP interfaces.
slpInfoListeningIPInterfaceEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.18.1.3.1
The configuration objects for a SLP listening IP interface.
Indexes
No indexes recorded
Column Syntax OID
listeningIPInterfaceId
The identifier of this IP interface.
SNMPv2-SMIInteger32
Constraints:
range: 0-9000
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.1.3.1.1
listeningIPInterfaceAddress
The adddress of this IP interface.
SNMPv2-SMIIpAddress
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.1.3.1.2

slpInfoDirectoryAgentsTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.18.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoDirectoryAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::slpInfoDirectoryAgentsTable' 
A table with all the SLP Directory Agents.
slpInfoDirectoryAgentEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.18.2.1.1
The configuration objects for a Directory Agent entry.
Indexes
No indexes recorded
Column Syntax OID
directoryAgentAddress
The IP adddress of this Directory Agent.
SNMPv2-SMIIpAddress
Constraints:
range: 3-1350
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.2.1.1.1
directoryAgentPort
The port of this Directory Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.2.1.1.2
directoryAgentTime
The time elapsed from the moment when this Directory Agent
was learned measured in seconds.
SNMPv2-SMIInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.2.1.1.3

slpInfoUserAgentsTable

table
.1.3.6.1.4.1.26543.2.7.4.2.3.18.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk slpInfoUserAgentsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::slpInfoUserAgentsTable' 
A table with all the SLP User Agents.
slpInfoUserAgentEntry row .1.3.6.1.4.1.26543.2.7.4.2.3.18.3.1.1
The configuration objects for a User Agent entry.
Indexes
No indexes recorded
Column Syntax OID
userAgentAddress
The IP adddress of this User Agent.
SNMPv2-SMIIpAddress
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.3.1.1.1
userAgentPort
The port of this User Agent. Communication can be done
using TCP or UDP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.3.1.1.2
userAgentTime
The time elapsed from the moment when this User Agent was learned
measured in seconds.
SNMPv2-SMIInteger32
Enumerated Values:
1anycast
2none
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.2.3.18.3.1.1.3

ipCurCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.1.2 · 1 row entry · 24 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgIntfTable' 
The table of IP interface configuration.
ipCurCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1
A row in the Ip interface table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgIntfIndex
The interface number for which the IP information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.1
ipCurCfgIntfAddr
This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:x…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.2
ipCurCfgIntfMask
The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.3
ipCurCfgIntfBroadcastobsolete
The broadcast address of the interface.
SNMPv2-SMIIpAddress
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.4
ipCurCfgIntfVlan
The VLAN associated with the interface.
SNMPv2-SMIInteger32
Constraints:
range: 0-15
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.5
ipCurCfgIntfState
The state of the interface.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.6
ipCurCfgIntfBootpRelay
Enable/disable BOOTP relay.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.7
ipCurCfgIntfRouteAdv
Enable/disable route advertisement of the interface.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.12
ipCurCfgIntfManagedCfg
Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.13
ipCurCfgIntfOtherCfg
Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.14
ipCurCfgIntfAdvLifetime
Set Router Advertisement lifetime of the interface.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.15
ipCurCfgIntfDadAttempts
Set the number of duplicate address detection (dad)
attempts of the interface.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.16
ipCurCfgIntfReachTime
Set the advertised reachability time of the interface in ms.
Unsigned32
Constraints:
range: 0-9000
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.17
ipCurCfgIntfAdvInterval
Set the IPv6 Router Advertisement interval of the interface.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.18
ipCurCfgIntfAdvIntervalMin
Set the IPv6 Router Advertisement Minimum interval limit
of the interface.
Integer32
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.19
ipCurCfgIntfRetransmitTimer
Set the IPv6 Router Advertisement Retransmit Timer in ms.
Unsigned32
Constraints:
range: 4-1800
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.20
ipCurCfgIntfHopLimit
Set the IPv6 Router Advertisement Current Hop Limit
Integer32
Constraints:
range: 3-1350
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.21
ipCurCfgIntfAdvMtu
Enable/disable Advertise MTU option.
Enumeration
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.22
ipCurCfgIntfIp6Host
Enable/disable IPv6 host mode on the interface.
Enumeration
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.23
ipCurCfgSecIntfAddr
This field configures the new IP/IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:…
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.25
ipCurCfgSecIntfPrefix
The IPv6 prefix length (integer in range 0..128)
associated with this IP address .
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.26
ipCurCfgIntfAnycast
This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.
Enumeration
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.27
ipCurCfgSecIntfAnycast
This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.28
ipCurCfgIntfIp6Dstun
Enable/disable sending of ICMP Unreachable messages.
Enumeration
Enumerated Values:
1anycast
2none
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.2.1.29

ipNewCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.1.3 · 1 row entry · 24 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgIntfTable' 
The table of interface in the new configuration block.
ipNewCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1
A row in the Ip interface table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgIntfIndex
The interface number for which the IP information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.1
ipNewCfgIntfAddr
This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:x…
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.2
ipNewCfgIntfMask
The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.3
ipNewCfgIntfVlan
The VLAN associated with the interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.5
ipNewCfgIntfState
The state of the interface.
Enumerationr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.6
ipNewCfgIntfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.7
ipNewCfgIntfBootpRelay
Enable/disable BOOTP relay.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.8
ipNewCfgIntfRouteAdv
Enable/disable route advertisement of the interface.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.13
ipNewCfgIntfManagedCfg
Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.14
ipNewCfgIntfOtherCfg
Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.15
ipNewCfgIntfAdvLifetime
Set Router Advertisement lifetime of the interface.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.16
ipNewCfgIntfDadAttempts
Set the number of duplicate address detection (dad)
attempts of the interface.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.17
ipNewCfgIntfReachTime
Set the advertised reachability time of the interface in ms.
Unsigned32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.18
ipNewCfgIntfAdvInterval
Set the IPv6 Router Advertisement interval of the interface.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.19
ipNewCfgIntfAdvIntervalMin
Set the IPv6 Router Advertisement Minimum interval limit
of the interface.
Integer32r/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.20
ipNewCfgIntfRetransmitTimer
Set the IPv6 Router Advertisement Retransmit Timer in ms.
Unsigned32r/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.21
ipNewCfgIntfHopLimit
Set the IPv6 Router Advertisement Current Hop Limit
Integer32r/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.22
ipNewCfgIntfAdvMtu
Enable/disable Advertise MTU option.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.23
ipNewCfgIntfIp6Host
Enable/disable IPv6 host mode on the interface.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.24
ipNewCfgSecIntfAddr
This field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxx…
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.26
ipNewCfgSecIntfPrefix
The IPv6 prefix length (integer in range 0..128)
associated with this IP address .
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.27
ipNewCfgIntfAnycast
This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.28
ipNewCfgSecIntfAnycast
This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.29
ipNewCfgIntfIp6Dstun
Enable/disable sending of ICMP Unreachable messages.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.30

ipCurCfgGwTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.2.4 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgGwTable' 
The table of gateways in the current configuration block.
ipCurCfgGwEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1
A row in the Ip gateway table
Indexes
Column Syntax OID
ipCurCfgGwIndex
The gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.1
ipCurCfgGwAddr
The IP address of the default gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.2
ipCurCfgGwInterval
The interval between ping attempts.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.3
ipCurCfgGwRetry
The number of failed attempts to declare the default gateway DOWN.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.4
ipCurCfgGwState
The state of the default gateway.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.5
ipCurCfgGwArp
The state of ARP only health checks.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.2.4.1.6

ipNewCfgGwTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.2.5 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgGwTable' 
The table of gateway in the new configuration block.
ipNewCfgGwEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1
A row in the Ip default gateway table
Indexes
Column Syntax OID
ipNewCfgGwIndex
The gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.1
ipNewCfgGwAddr
The IP address of the default gateway.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.2
ipNewCfgGwInterval
The interval in seconds between ping attempts.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.3
ipNewCfgGwRetry
The number of failed attempts to declare the default gateway DOWN.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.4
ipNewCfgGwState
The state of the default gateway.
Enumerationr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.5
ipNewCfgGwDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.6
ipNewCfgGwArp
The state of the ARP only health checks.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.2.5.1.7

ipCurCfgStaticRouteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgStaticRouteTable' 
The table of static routes in the current configuration block.
ipCurCfgStaticRouteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1
A row in the static IP route table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgStaticRouteIndx
The index of the static routing table.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1.1
ipCurCfgStaticRouteDestIp
The destination IP address of this route.
SNMPv2-SMIIpAddress
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1.2
ipCurCfgStaticRouteMask
The current subnet mask of this route.
SNMPv2-SMIIpAddress
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1.3
ipCurCfgStaticRouteGateway
The current gateway of this route.
SNMPv2-SMIIpAddress
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1.4
ipCurCfgStaticRouteInterface
The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.2.1.5

ipNewCfgStaticRouteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.3.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgStaticRouteTable' 
The table of static routes in the new configuration block.
ipNewCfgStaticRouteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1
A row in the static IP route table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgStaticRouteIndx
The index of the static routing table.
SNMPv2-SMIInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.1
ipNewCfgStaticRouteDestIp
The destination IP address of this route.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.2
ipNewCfgStaticRouteMask
The subnet mask of this route.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.3
ipNewCfgStaticRouteGateway
The IP address of the gateway for this route.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.4
ipNewCfgStaticRouteAction
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.5
ipNewCfgStaticRouteInterface
The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.3.3.1.6

vrrpCurCfgVirtRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.3 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpCurCfgVirtRtrTable' 
The table of VRRP virtual routers in the current configuration block.
vrrpCurCfgVirtRtrTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1
Information about a VRRP virtual router.
Indexes
No indexes recorded
Column Syntax OID
vrrpCurCfgVirtRtrIndx
The VRRP virtual router table index.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.1
vrrpCurCfgVirtRtrID
The VRRP virtual router identifier.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.2
vrrpCurCfgVirtRtrAddr
The VRRP virtual router IP address.
SNMPv2-SMIIpAddress
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.3
vrrpCurCfgVirtRtrIfIndex
The IfIndex that the VRRP virtual router is representing.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.4
vrrpCurCfgVirtRtrInterval
The time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.5
vrrpCurCfgVirtRtrPriority
The priority value to be used by the specified VRRP virtual routers.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.6
vrrpCurCfgVirtRtrPreempt
This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.7
vrrpCurCfgVirtRtrTckVirtRtr
Enable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.9
vrrpCurCfgVirtRtrTckIpIntf
Enable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration
Enumerated Values:
1none
2simple-text-password
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.10
vrrpCurCfgVirtRtrTckVlanPort
Enable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.15
vrrpCurCfgVirtRtrState
Enable or disable the VRRP virtual router.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.16
vrrpCurCfgVirtRtrFastAdvertisement
This object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVER…
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.17
vrrpCurCfgVirtRtrPreDelay
The pre-emptive delay interval in seconds.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.3.1.18

vrrpNewCfgVirtRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.4 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpNewCfgVirtRtrTable' 
The table of VRRP virtual routers in the current configuration block.
vrrpNewCfgVirtRtrTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1
Information about a VRRP virtual router.
Indexes
No indexes recorded
Column Syntax OID
vrrpNewCfgVirtRtrIndx
The VRRP virtual router table index.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.1
vrrpNewCfgVirtRtrID
The VRRP virtual router identifier.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.2
vrrpNewCfgVirtRtrAddr
The VRRP virtual router IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.3
vrrpNewCfgVirtRtrIfIndex
The IfIndex that the VRRP virtual router is representing.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.4
vrrpNewCfgVirtRtrInterval
The time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.5
vrrpNewCfgVirtRtrPriority
The priority value to be used by the specified VRRP virtual router.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.6
vrrpNewCfgVirtRtrPreempt
This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.7
vrrpNewCfgVirtRtrDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.8
vrrpNewCfgVirtRtrTckVirtRtr
Enable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.10
vrrpNewCfgVirtRtrTckIpIntf
Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.11
vrrpNewCfgVirtRtrTckVlanPort
Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.12
vrrpNewCfgVirtRtrState
Enable or disable the VRRP virtual router.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.17
vrrpNewCfgVirtRtrFastAdvertisement
This object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only w…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.18
vrrpNewCfgVirtRtrPreDelay
The pre-emptive delay interval in seconds.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.4.1.19

vrrpCurCfgIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.6 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpCurCfgIfTable' 
The table of VRRP interface in the current configuration block.
vrrpCurCfgIfTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.6.1
Information about a VRRP interface.
Indexes
Column Syntax OID
vrrpCurCfgIfIndx
The VRRP interface index. This is eqivalent to IfIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.6.1.1
vrrpCurCfgIfAuthType
Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.
Enumeration
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.6.1.2
vrrpCurCfgIfPasswd
The password for authentication.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.6.6.1.3

vrrpNewCfgIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.7 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpNewCfgIfTable' 
The table of VRRP interface in the current configuration block.
vrrpNewCfgIfTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.7.1
Information about a VRRP interface.
Indexes
No indexes recorded
Column Syntax OID
vrrpNewCfgIfIndx
The VRRP interface index. This is eqivalent to IfIndex.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.7.1.1
vrrpNewCfgIfAuthType
Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.7.1.2
vrrpNewCfgIfPasswd
The password for authentication.
OctetStringr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.7.1.3
vrrpNewCfgIfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.7.1.4

vrrpCurCfgVirtRtrGrpTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.9 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpCurCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpCurCfgVirtRtrGrpTable' 
The table of VRRP virtual router group in the current configuration block.
vrrpCurCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1
Information about a VRRP failover virtual router.
Indexes
No indexes recorded
Column Syntax OID
vrrpCurCfgVirtRtrGrpIndx
The VRRP virtual router table index.
SNMPv2-SMIInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.1
vrrpCurCfgVirtRtrGrpID
The VRRP virtual router identifier.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.2
vrrpCurCfgVirtRtrGrpIfIndex
The IfIndex that the VRRP virtual router is representing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.3
vrrpCurCfgVirtRtrGrpInterval
The time interval between VRRP advertisements in seconds.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.4
vrrpCurCfgVirtRtrGrpPriority
The priority value to be used by the specified VRRP virtual routers.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.5
vrrpCurCfgVirtRtrGrpPreempt
This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.6
vrrpCurCfgVirtRtrGrpState
Enable or disable the VRRP virtual router.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.7
vrrpCurCfgVirtRtrGrpTckIpIntf
Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.10
vrrpCurCfgVirtRtrGrpTckVlanPort
Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.11
vrrpCurCfgVirtRtrGrpFastAdvertisement
This object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVER…
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.16
vrrpCurCfgVirtRtrGrpPredelay
The pre-emptive delay interval in seconds for specified VRRP virtual routers.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.6.9.1.21

vrrpNewCfgVirtRtrGrpTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.6.10 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpNewCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpNewCfgVirtRtrGrpTable' 
The table of VRRP virtual router group in the new configuration block.
vrrpNewCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1
Information about a VRRP failover virtual router.
Indexes
No indexes recorded
Column Syntax OID
vrrpNewCfgVirtRtrGrpIndx
The VRRP virtual router table index.
SNMPv2-SMIInteger32
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.1
vrrpNewCfgVirtRtrGrpID
The VRRP virtual router identifier.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.2
vrrpNewCfgVirtRtrGrpIfIndex
The IfIndex that the VRRP virtual router is representing.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.3
vrrpNewCfgVirtRtrGrpInterval
The time interval between VRRP advertisements in seconds.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.4
vrrpNewCfgVirtRtrGrpPriority
The priority value to be used by the specified VRRP virtual router.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.5
vrrpNewCfgVirtRtrGrpPreempt
This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.6
vrrpNewCfgVirtRtrGrpState
Enable or disable the VRRP virtual router.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.7
vrrpNewCfgVirtRtrGrpDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.8
vrrpNewCfgVirtRtrGrpTckIpIntf
Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.11
vrrpNewCfgVirtRtrGrpTckVlanPort
Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.12
vrrpNewCfgVirtRtrGrpFastAdvertisement
This object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only w…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.17
vrrpNewCfgVirtRtrGrpPredelay
The pre-emptive delay interval in seconds.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.6.10.1.21

ipCurCfgBootpGlobalServerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.20 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpGlobalServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgBootpGlobalServerTable' 
The table of global BOOTP server addresses
ipCurCfgBootpGlobalServerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.20.1
A row in the ipCurCfgBootpGlobalServerAddrTable
Indexes
Column Syntax OID
ipCurCfgBootpGlobalServerIndex
The index of ipCurCfgBootpGlobalServerTable
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.20.1.1
ipCurCfgBootpGlobalServerAddress
The current global server IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.20.1.2

ipNewCfgBootpGlobalServerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.21 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpGlobalServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgBootpGlobalServerTable' 
The table of global BOOTP server addresses
ipNewCfgBootpGlobalServerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.21.1
A row in the ipNewCfgBootpGlobalServerAddrTable
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgBootpGlobalServerIndex
The index of ipCurCfgBootpGlobalServerTable
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.21.1.1
ipNewCfgBootpGlobalServerAddress
The current global server IP.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.21.1.2

ipCurCfgBootpBcastDomainTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.22 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpBcastDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgBootpBcastDomainTable' 
The table of broadcast domain settings
ipCurCfgBootpBcastDomainEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.22.1
A row in the broadcast domain table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgBootpBcastDomainIndex
The index of the broadcast domain entry
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.22.1.1
ipCurCfgBootpBcastDomainVlan
The VLAN of the broadcast domain entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.22.1.2
ipCurCfgBootpBcastDomainEnable
The state of the broadcast domain entry
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.8.22.1.3

ipNewCfgBootpBcastDomainTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.23 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpBcastDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgBootpBcastDomainTable' 
The table of broadcast domain settings
ipNewCfgBootpBcastDomainEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.23.1
A row in the broadcast domain table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgBootpBcastDomainIndex
The index of the broadcast domain entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.23.1.1
ipNewCfgBootpBcastDomainVlan
The VLAN of the broadcast domain entry
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.23.1.2
ipNewCfgBootpBcastDomainEnable
The state of the broadcast domain entry
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.23.1.3
ipNewCfgBootpBcastDomainAction
When set to the value of 2 (delete), the broadcast domain is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of broadcast domain.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.8.23.1.4

ipCurCfgBootpBcastDomainServerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.24 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgBootpBcastDomainServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgBootpBcastDomainServerTable' 
The table of broadcast domain servers
ipCurCfgBootpBcastDomainServerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.24.1
A row in the broadcast domain server table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgBootpBcastDomainBDIndex
The index of the broadcast domain entry in the server table
SNMPv2-SMIInteger32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.24.1.1
ipCurCfgBootpBcastDomainServIndex
The index of the server in the server table
SNMPv2-SMIInteger32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.24.1.2
ipCurCfgBootpBcastDomainServerIP
The current broadcast domain server IP.
SNMPv2-SMIIpAddress
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.24.1.3

ipNewCfgBootpBcastDomainServerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.8.25 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgBootpBcastDomainServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgBootpBcastDomainServerTable' 
The table of broadcast domain servers
ipNewCfgBootpBcastDomainServerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.8.25.1
A row in the broadcast domain server table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgBootpBcastDomainBDIndex
The index of the broadcast domain entry in the server table
SNMPv2-SMIInteger32
Constraints:
range: 0-191
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.25.1.1
ipNewCfgBootpBcastDomainServIndex
The index of the server in the server table
SNMPv2-SMIInteger32
Enumerated Values:
1none
2type1
3type2
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.25.1.2
ipNewCfgBootpBcastDomainServerIP
The current broadcast domain server IP.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.8.25.1.3

ipCurCfgNwfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.10.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgNwfTable' 
The table of IP network filter in the current configuration block.
ipCurCfgNwfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.10.2.1
Information about an IP network filter.
Indexes
Column Syntax OID
ipCurCfgNwfIndex
The netowrk filter number for which the NWF is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.2.1.1
ipCurCfgNwfAddr
The IP address of the network filter.
SNMPv2-SMIIpAddress
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.2.1.2
ipCurCfgNwfMask
The IP network filter mask.
SNMPv2-SMIIpAddress
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.2.1.3
ipCurCfgNwfState
Enable or disable the network filter.
Enumeration
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.2.1.4

ipNewCfgNwfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.10.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgNwfTable' 
The table of IP network filter in the current configuration block.
ipNewCfgNwfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1
Information about an IP network filter.
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgNwfIndex
The netowrk filter number for which the NWF is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-191
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1.1
ipNewCfgNwfAddr
The IP address of the network filter.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1none
2type1
3type2
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1.2
ipNewCfgNwfMask
The IP network filter mask.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1other
2delete
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1.3
ipNewCfgNwfState
Enable or disable the network filter.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1.4
ipNewCfgNwfDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.10.3.1.5

ipCurCfgRmapTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.2 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgRmapTable' 
The table of IP route map in the current configuration block.
ipCurCfgRmapEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1
Information about an IP route map.
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.1
ipCurCfgRmapLp
The local-preference of the route map. 4294967295 means none
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.2
ipCurCfgRmapMetric
The metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.3
ipCurCfgRmapPrec
The precedence of the route map.
Integer32
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.4
ipCurCfgRmapWeight
The weight of the route map. 65535 means none
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.5
ipCurCfgRmapState
Enable or disable the route map.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.6
ipCurCfgRmapAp
The as-path prepend of the matched route. Up to 32 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>] ...
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.7
ipCurCfgRmapMetricType
The OSPF metric-type of the matched route.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.8
ipCurCfgRmapNexthop
Peer address as nexthop of the matched route(only for BGP).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.11.2.1.9

ipNewCfgRmapTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.3 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgRmapTable' 
The table of IP route map in the new configuration block.
ipNewCfgRmapEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1
Information about an IP route map.
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Enumerated Values:
1permit
2deny
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.1
ipNewCfgRmapLp
The local-preference of the route map. 4294967295 means none
Unsigned32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.2
ipNewCfgRmapMetric
The metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.
Unsigned32r/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.3
ipNewCfgRmapPrec
The precedence of the route map.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.4
ipNewCfgRmapWeight
The weight of the route map. 65535 means none
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.5
ipNewCfgRmapState
Enable or disable the route map.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.6
ipNewCfgRmapAp
The as-path prepend of the matched route. Up to 32 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>] ...
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.7
ipNewCfgRmapMetricType
The OSPF metric-type of the matched route.
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.8
ipNewCfgRmapDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.9
ipNewCfgRmapNexthop
Peer address as nexthop of the matched route(only for BGP).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.3.1.10

ipCurCfgAlistTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.5 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgAlistTable' 
The table of IP route map access list in the current configuration 
block.
ipCurCfgAlistEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1
Information about an IP route map.
Indexes
Column Syntax OID
ipCurCfgAlistRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.1
ipCurCfgAlistIndex
The access list number for which the access list is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.2
ipCurCfgAlistNwf
The network filter number of the route map access list.
0 means none
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.3
ipCurCfgAlistMetric
The metric of the route map access list. 4294967295 means none
Unsigned32
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.4
ipCurCfgAlistAction
Action of the route map access list.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.5
ipCurCfgAlistState
Enable or disable the route map access list.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.5.1.6

ipNewCfgAlistTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.6 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgAlistTable' 
The table of IP route map access list in the current configuration
block.
ipNewCfgAlistEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1
Information about an IP route map.
Indexes
Column Syntax OID
ipNewCfgAlistRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.1
ipNewCfgAlistIndex
The access list number for which the access list is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.2
ipNewCfgAlistNwf
The network filter number of the route map access list.
0 means none
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.3
ipNewCfgAlistMetric
The metric of the route map access list. 4294967295 means none
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.4
ipNewCfgAlistAction
Action of the route map access list.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.5
ipNewCfgAlistState
Enable or disable the route map access list.
Enumerationr/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.6
ipNewCfgAlistDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1none
2import
3originate
4redistribute
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.6.1.7

ipCurCfgAspathTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.8 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgAspathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgAspathTable' 
The table of IP route map access path configuration.
ipCurCfgAspathEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1
Information about an IP route map.
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgAspathRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1.1
ipCurCfgAspathIndex
The access path number for which the access list is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1.2
ipCurCfgAspathAS
The AS number of the route map access path.
0 means none
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1.3
ipCurCfgAspathAction
Action of the route map access path.
Enumeration
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1.4
ipCurCfgAspathState
Enable or disable the route map access path.
Enumeration
Constraints:
range: 0-21845
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.8.1.5

ipNewCfgAspathTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.11.9 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgAspathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgAspathTable' 
The table of IP route map access path configuration
ipNewCfgAspathEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1
Information about an IP route map.
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgAspathRmapIndex
The route map number for which the RMAP is related.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.1
ipNewCfgAspathIndex
The access path number for which the access list is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.2
ipNewCfgAspathAS
The AS number of the route map access path.
0 means none
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.3
ipNewCfgAspathAction
Action of the route map access path.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.4
ipNewCfgAspathState
Enable or disable the route map access path.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.5
ipNewCfgAspathDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.11.9.1.6

bgpCurCfgPeerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.3 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpCurCfgPeerTable' 
The table of BGP peer in the current configuration block.
bgpCurCfgPeerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1
Information about a BGP peer.
Indexes
No indexes recorded
Column Syntax OID
bgpCurCfgPeerIndex
The BGP peer number for which the BGP peer table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.1
bgpCurCfgPeerRemoteAddr
The remote IP address of the BGP peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.2
bgpCurCfgPeerRemoteAs
The remote AS number of the BGP peer. 0 means none
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.3
bgpCurCfgPeerTtl
The time-to-live value of the BGP peer IP datagram. 0 means none.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.4
bgpCurCfgPeerState
Enable or disable the peer.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.5
bgpCurCfgPeerMetric
The metric value of the BGP peer. A value of '0' means none
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.10
bgpCurCfgPeerDefaultAction
The value of default route action.
Enumeration
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.11
bgpCurCfgPeerOspfState
Enable or disable advertising OSPF routes.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.12
bgpCurCfgPeerFixedState
Enable or disable advertising fixed routes.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.13
bgpCurCfgPeerStaticState
Enable or disable advertising static routes.
Enumeration
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.14
bgpCurCfgPeerInRmapList
The route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| …
OctetString
Enumerated Values:
1none
2import
3originate
4redistribute
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.16
bgpCurCfgPeerOutRmapList
The route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
||…
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.17
bgpCurCfgPeerHold
The hold time
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.18
bgpCurCfgPeerAlive
The keep alive time
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.19
bgpCurCfgPeerAdvert
The min time between advertisements
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.20
bgpCurCfgPeerRetry
The connect retry interval
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.21
bgpCurCfgPeerOrig
The min time between route originations
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.22
bgpCurCfgPeerRipState
Enable/disable advertising RIP routes
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.23
bgpCurCfgPeerPassword
Peer BGP password
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.24
bgpCurCfgPeerPassive
Enable/disable BGP passive peer
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.25
bgpCurCfgPeerUpdateSrcIf
BGP peer update source interface index
SNMPv2-SMIInteger32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.30
bgpCurCfgPeerUpdateSrcLoopIf
BGP peer update source loopback interface index
SNMPv2-SMIInteger32
Constraints:
range: 0-21845
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.31
bgpCurCfgPeerTtlSecHops
The BGP ttl security hops. 0 means none.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.32
bgpCurCfgPeerNexthopSelf
Enable/Disable using this router as next-hop in BGP updates.
Enumeration
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.33
bgpCurCfgPeerClient
Enable/disable BGP client peer
Enumeration
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.3.1.34

bgpNewCfgPeerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.4 · 1 row entry · 30 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpNewCfgPeerTable' 
The table of BGP peer in the new configuration block.
bgpNewCfgPeerEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1
Information about a BGP peer.
Indexes
No indexes recorded
Column Syntax OID
bgpNewCfgPeerIndex
The BGP peer number for which the BGP peer table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.1
bgpNewCfgPeerRemoteAddr
The remote IP address of the BGP peer.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.2
bgpNewCfgPeerRemoteAs
The remote AS number of the BGP peer. 0 means none
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.3
bgpNewCfgPeerTtl
The time-to-live value of the BGP peer IP datagram. 0 means none.
Integer32r/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.4
bgpNewCfgPeerState
Enable or disable the peer.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.5
bgpNewCfgPeerDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.6
bgpNewCfgPeerMetric
The metric value of the BGP peer. A value of '0' means none
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.10
bgpNewCfgPeerDefaultAction
The value of default route action.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.11
bgpNewCfgPeerOspfState
Enable or disable advertising OSPF routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.12
bgpNewCfgPeerFixedState
Enable or disable advertising fixed routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.13
bgpNewCfgPeerStaticState
Enable or disable advertising static routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.14
bgpNewCfgPeerInRmapList
The route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| …
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.16
bgpNewCfgPeerOutRmapList
The route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
||…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.17
bgpNewCfgPeerAddInRmap
The route map to be add into in-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.18
bgpNewCfgPeerAddOutRmap
The route map to be add into out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.19
bgpNewCfgPeerRemoveInRmap
The route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.20
bgpNewCfgPeerRemoveOutRmap
The route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.21
bgpNewCfgPeerHold
The hold time
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.22
bgpNewCfgPeerAlive
The keep alive time
Integer32r/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.23
bgpNewCfgPeerAdvert
The min time between advertisements
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.24
bgpNewCfgPeerRetry
The connect retry interval
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.25
bgpNewCfgPeerOrig
The min time between route originations
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.26
bgpNewCfgPeerRipState
Enable/disable advertising RIP routes
Enumerationr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.27
bgpNewCfgPeerPassword
Peer BGP password
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.28
bgpNewCfgPeerPassive
Enable/disable BGP passive peer
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.29
bgpNewCfgPeerUpdateSrcIf
BGP peer update source interface index
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-96
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.30
bgpNewCfgPeerUpdateSrcLoopIf
BGP peer update source loopback interface index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.31
bgpNewCfgPeerTtlSecHops
The BGP ttl security hops. 0 means none.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.32
bgpNewCfgPeerNexthopSelf
Enable/Disable using this router as next-hop in BGP updates.
Enumerationr/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.33
bgpNewCfgPeerClient
Enable/disable BGP client peer
Enumerationr/w
Constraints:
range: 0-21845
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.4.1.34

bgpCurCfgAggrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.6 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpCurCfgAggrTable' 
The table of BGP aggregation configuration.
bgpCurCfgAggrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.6.1
Information about a BGP aggregation.
Indexes
No indexes recorded
Column Syntax OID
bgpCurCfgAggrIndex
The aggregation number for which the BGP aggregation is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.6.1.1
bgpCurCfgAggrAddr
The IP address of the BGP aggregation.
SNMPv2-SMIIpAddress
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.6.1.2
bgpCurCfgAggrMask
The subnet mask of the BGP aggregation.
SNMPv2-SMIIpAddress
Enumerated Values:
1none
2import
3originate
4redistribute
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.6.1.3
bgpCurCfgAggrState
Enable or disable the BGP aggregation.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.6.1.4

bgpNewCfgAggrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.7 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpNewCfgAggrTable' 
The table of BGP aggregation configuration.
bgpNewCfgAggrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1
Information about an BGP aggregation.
Indexes
No indexes recorded
Column Syntax OID
bgpNewCfgAggrIndex
The aggregation number for which the BGP aggregation is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1.1
bgpNewCfgAggrAddr
The IP address of the BGP aggregation.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1.2
bgpNewCfgAggrMask
The subnet mask of the BGP aggregation.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1.3
bgpNewCfgAggrState
Enable or disable the BGP aggregation.
Enumerationr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1.4
bgpNewCfgAggrDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.7.1.5

bgpCurCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.9 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpCurCfgGroupTable' 
The table of BGP group in the current configuration block.
bgpCurCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1
Information about a BGP group.
Indexes
No indexes recorded
Column Syntax OID
bgpCurCfgGroupIndex
The BGP group number for which the BGP group table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.1
bgpCurCfgGroupName
The group name.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.2
bgpCurCfgGroupRemoteAddr
The IP address of the BGP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.3
bgpCurCfgGroupRemoteMask
The subnet mask of the BGP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.4
bgpCurCfgGroupLimit
The maximum number of BGP dynamic peers.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.5
bgpCurCfgGroupUpdateSrcIf
BGP group update source interface index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.6
bgpCurCfgGroupUpdateSrcLoopIf
BGP group update source loopback interface index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.7
bgpCurCfgGroupHold
The hold time
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.8
bgpCurCfgGroupAlive
The keep alive time
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.9
bgpCurCfgGroupAdvert
The min time between advertisements
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.10
bgpCurCfgGroupOrig
The min time between route originations
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.11
bgpCurCfgGroupMetric
The metric value of the BGP group. A value of '0' means none
Unsigned32
Constraints:
range: 0-21845
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.12
bgpCurCfgGroupTtl
The time-to-live value of the BGP peer IP datagram. 0 means none.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.13
bgpCurCfgGroupDefaultAction
The value of default route action.
Enumeration
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.14
bgpCurCfgGroupOspfState
Enable or disable advertising OSPF routes.
Enumeration
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.15
bgpCurCfgGroupRipState
Enable/disable advertising RIP routes
Enumeration
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.16
bgpCurCfgGroupFixedState
Enable or disable advertising fixed routes.
Enumeration
Enumerated Values:
1none
2import
3originate
4redistribute
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.17
bgpCurCfgGroupStaticState
Enable or disable advertising static routes.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.18
bgpCurCfgGroupInRmapList
The route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_…
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.19
bgpCurCfgGroupOutRmapList
The route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |…
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.20
bgpCurCfgGroupPassword
Peer BGP password
OctetString
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.21
bgpCurCfgGroupState
Enable or disable the group.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.22
bgpCurCfgGroupTtlSecHops
The BGP ttl security hops. 0 means none.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.23
bgpCurCfgGroupNexthopSelf
Enable/Disable using this router as next-hop in BGP updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.24
bgpCurCfgGroupClient
Enable/Disable Route Reflector for this client.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.12.9.1.25

bgpNewCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.10 · 1 row entry · 30 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpNewCfgGroupTable' 
The table of BGP group in the new configuration block.
bgpNewCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1
Information about a BGP group.
Indexes
No indexes recorded
Column Syntax OID
bgpNewCfgGroupIndex
The BGP group number for which the BGP group table is related.
SNMPv2-SMIInteger32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.1
bgpNewCfgGroupName
The group name.
OctetStringr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.2
bgpNewCfgGroupRemoteAddr
The IP address of the BGP group.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.3
bgpNewCfgGroupRemoteMask
The subnet mask of the BGP group.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.4
bgpNewCfgGroupLimit
The maximum number of BGP dynamic peers.
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.5
bgpNewCfgGroupUpdateSrcIf
BGP group update source interface index
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.6
bgpNewCfgGroupUpdateSrcLoopIf
BGP group update source loopback interface index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.7
bgpNewCfgGroupHold
The hold time
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.8
bgpNewCfgGroupAlive
The keep alive time
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.9
bgpNewCfgGroupAdvert
The min time between advertisements
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.10
bgpNewCfgGroupOrig
The min time between route originations
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.11
bgpNewCfgGroupMetric
The metric value of the BGP group. A value of '0' means none
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.12
bgpNewCfgGroupTtl
The time-to-live value of the BGP peer IP datagram. 0 means none.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.13
bgpNewCfgGroupDefaultAction
The value of default route action.
Enumerationr/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.14
bgpNewCfgGroupOspfState
Enable or disable advertising OSPF routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.15
bgpNewCfgGroupRipState
Enable/disable advertising RIP routes
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.16
bgpNewCfgGroupFixedState
Enable or disable advertising fixed routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.17
bgpNewCfgGroupStaticState
Enable or disable advertising static routes.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.18
bgpNewCfgGroupInRmapList
The route maps present in the in route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_…
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.19
bgpNewCfgGroupOutRmapList
The route maps present in the out route map list.
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |…
OctetString
Enumerated Values:
1none
2password
3message-digest
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.20
bgpNewCfgGroupAddInRmap
The route map to be add into in-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Enumerated Values:
0transit
1stub
2nssa
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.21
bgpNewCfgGroupAddOutRmap
The route map to be add into out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.22
bgpNewCfgGroupRemoveInRmap
The route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.23
bgpNewCfgGroupRemoveOutRmap
The route map to be removed from out-rmap list. When read,
0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.24
bgpNewCfgGroupPassword
Peer BGP password
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.25
bgpNewCfgGroupDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.26
bgpNewCfgGroupState
Enable or disable the group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.27
bgpNewCfgGroupTtlSecHops
The BGP ttl security hops. 0 means none.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.28
bgpNewCfgGroupNexthopSelf
Enable/Disable using this router as next-hop in BGP updates.
Enumerationr/w
Enumerated Values:
1none
2password
3message-digest
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.29
bgpNewCfgGroupClient
Enable/Disable Route Reflector for this client.
Enumerationr/w
Enumerated Values:
0transit
1stub
2nssa
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.10.1.30

bgpCurCfgGroupRASTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.11 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpCurCfgGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpCurCfgGroupRASTable' 
The table of BGP group RASs in the current configuration block.
bgpCurCfgGroupRASEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.11.1
Information about a BGP group RAS.
Indexes
No indexes recorded
Column Syntax OID
bgpCurCfgGroupRASIndex
The BGP remote-as number for which the BGP RAS table is related.
SNMPv2-SMIInteger32
Enumerated Values:
0no
1yes
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.11.1.1
bgpCurCfgGroupRAS
The remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means none
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.12.11.1.2

bgpNewCfgGroupRASTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.12.12 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpNewCfgGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpNewCfgGroupRASTable' 
The table of BGP group RASs in the new configuration block.
bgpNewCfgGroupRASEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.12.12.1
Information about a BGP group RAS.
Indexes
No indexes recorded
Column Syntax OID
bgpNewCfgGroupRASIndex
The BGP group RAS number for which the BGP group RASs table is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.12.1.1
bgpNewCfgGroupRAS
The remote AS number of the BGP group bgpNewCfgGroupIndex. 0 means none
Integer32r/w
Enumerated Values:
0md5
1sha256
 .1.3.6.1.4.1.26543.2.7.4.3.1.12.12.1.2

ospfCurCfgAreaTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgAreaTable' 
The table of OSPF area in the current configuration block.
ospfCurCfgAreaEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1
Information about a OSPF area.
Indexes
Column Syntax OID
ospfCurCfgAreaIndex
The OSPF area number for which the OSPF area table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.1
ospfCurCfgAreaId
The IP Address of the OSPF area.
SNMPv2-SMIIpAddress
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.2
ospfCurCfgAreaSpfInterval
The SPF interval for the OSPF area.
Integer32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.3
ospfCurCfgAreaAuthType
Type of authentication being used.
none(1) - no authentication
password(2) - use password
message-digest(3) - use message-digest authentication.
Enumeration
Enumerated Values:
0md5
1sha256
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.4
ospfCurCfgAreaType
Type of Area.
transit(0)
stub(1)
nssa(2)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.5
ospfCurCfgAreaMetric
Metric (1-65535)
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.6
ospfCurCfgAreaStatus
Status
disabled(0)
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.7

ospfNewCfgAreaTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgAreaTable' 
The table of OSPF area in the new configuration block.
ospfNewCfgAreaEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1
Information about a OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgAreaIndex
The OSPF area number for which the OSPF area table is related.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.1
ospfNewCfgAreaId
The IP Address of the OSPF area.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.2
ospfNewCfgAreaSpfInterval
The SPF interval for the OSPF area.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.3
ospfNewCfgAreaAuthType
Type of authentication being used.
none(1) - no authentication
password(2) - use password.
message-digest(3) - use message-digest authentication.
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.4
ospfNewCfgAreaType
Type of Area.
transit(0)
stub(1)
nssa(2)
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.5
ospfNewCfgAreaMetric
Metric (1-65535)
Integer32r/w
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.6
ospfNewCfgAreaStatus
Status
disabled(0)
enabled(1)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.7
ospfNewCfgAreaDelete
Delete the area
no(0),
yes(1)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.3.1.8

ospfCurCfgMdkeyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.5 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgMdkeyTable' 
The table of OSPF MD5/SHA256 keys in the current configuration block.
ospfCurCfgMdkeyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.5.1
Information about an OSPF MD keys table.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgMdkeyIndex
The OSPF MD5/SHA256 Key number for which the OSPF MdKey table is related.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.5.1.1
ospfCurCfgMdkeyKey
The character string for MD5 and SHA256 key. The maximum size for MD5 is 16 and for SHA256 is 32.
OctetString
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.5.1.2
ospfCurCfgMdkeyType
The OSPF MD key type, 0:MD5, 1:SHA256.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.5.1.3

ospfNewCfgMdkeyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.6 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgMdkeyTable' 
The table of OSPF MD5/SHA256 keys in the new configuration block.
ospfNewCfgMdkeyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.6.1
Information about an OSPF MD keys table.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgMdkeyIndex
The OSPF MD5/SHA256 Key number for which the OSPF MdKey table is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-19
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.6.1.1
ospfNewCfgMdkeyKey
The character string for MD5 and SHA256 key. The maximum size for MD5 is 16 and for SHA256 is 32.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.6.1.2
ospfNewCfgMdkeyDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.6.1.3
ospfNewCfgMdkeyType
The OSPF MD key type, 0:MD5, 1:SHA256.
Enumerationr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.6.1.4

ospfCurCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.7 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgIntfTable' 
The table of OSPF Interface in the current configuration block.
ospfCurCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1
Information about an OSPF Interface.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgIntfIndex
The OSPF Interface number for which the OSPF Interface table is
related.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.1
ospfCurCfgIntfArea
The index of the area that the interface belongs (0..5)
Integer32
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.2
ospfCurCfgIntfMdkey
The MD5/SHA256 key for the OSPF interface
0 (none) no MD5/SHA256 authentication.
Integer32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.3
ospfCurCfgIntfCost
Interface cost
Integer32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.4
ospfCurCfgIntfPrio
Interface router priority
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.5
ospfCurCfgIntfHello
Hello interval
Integer32
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.6
ospfCurCfgIntfHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.7
ospfCurCfgIntfDead
Dead interval
Integer32
Enumerated Values:
0other
1delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.8
ospfCurCfgIntfDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.9
ospfCurCfgIntfTrans
Transit delay
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.10
ospfCurCfgIntfRetra
Retransmit interval
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.11
ospfCurCfgIntfAuthKey
Authentication Key
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.12
ospfCurCfgIntfPassive
Passive interface
disabled(0),
enabled(1)
Enumeration
Constraints:
range: 0-19
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.13
ospfCurCfgIntfStatus
Status of the interface
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.14
ospfCurCfgIntfPtop
Point-to-point interface
disabled(0),
enabled(1)
Enumeration
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.7.1.15

ospfNewCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.8 · 1 row entry · 16 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgIntfTable' 
The table of OSPF interface in the new configuration block.
ospfNewCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1
Information about an OSPF interface.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgIntfIndex
The OSPF Interface number for which the OSPF Interface table is
related.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.1
ospfNewCfgIntfArea
The index of the area that the interface belongs
Integer32r/w
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.2
ospfNewCfgIntfMdkey
The MD5/SHA256 key for the OSPF interface
0 (none) no MD5/SHA256 authentication.
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.3
ospfNewCfgIntfCost
Interface cost(1..65535)
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.4
ospfNewCfgIntfPrio
Interface router priority(0..255)
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.5
ospfNewCfgIntfHello
Hello interval(1..65535s | 50..65535ms)
Integer32r/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.6
ospfNewCfgIntfHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.7
ospfNewCfgIntfDead
Dead interval(1..65535s |1000..65535ms)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.8
ospfNewCfgIntfDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.9
ospfNewCfgIntfTrans
Transit delay(1..3600)
Integer32r/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.10
ospfNewCfgIntfRetra
Retransmit interval(1..3600)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.11
ospfNewCfgIntfAuthKey
Authentication Key
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.12
ospfNewCfgIntfPassive
Passive interface
disabled(0),
enabled(1)
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.13
ospfNewCfgIntfStatus
Status of the interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.14
ospfNewCfgIntfDelete
Delete the interface
other(0),
delete(1)
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.15
ospfNewCfgIntfPtop
Point-to-point interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.8.1.16

ospfCurCfgVirtIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.9 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgVirtIntfTable' 
The table of OSPF Virtual Interface configuration in the current 
configuration.
ospfCurCfgVirtIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1
Information about an OSPF virtual Interface.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgVirtIntfIndex
The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-8
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.1
ospfCurCfgVirtIntfAreaId
The index of the OSPF area to which this virtual interface
belongs.
Integer32
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.2
ospfCurCfgVirtIntfNbr
The IP Address of the OSPF neighbor for this virtual interface.
SNMPv2-SMIIpAddress
Enumerated Values:
0other
1delete
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.3
ospfCurCfgVirtIntfMdkey
The MD5/SHA256 key for the OSPF virtual interface
0 (none) no MD5/SHA256 authentication.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.4
ospfCurCfgVirtIntfHello
Hello interval
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.5
ospfCurCfgVirtIntfHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.6
ospfCurCfgVirtIntfDead
Dead interval
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.7
ospfCurCfgVirtIntfDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.8
ospfCurCfgVirtIntfTrans
Transit delay
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.9
ospfCurCfgVirtIntfRetra
Retransmit interval
Integer32
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.10
ospfCurCfgVirtIntfAuthKey
Authentication Key
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.11
ospfCurCfgVirtIntfStatus
Status
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.9.1.12

ospfNewCfgVirtIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.10 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgVirtIntfTable' 
The table of OSPF Virtual interface in the new configuration block.
ospfNewCfgVirtIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1
Information about an OSPF virtual interface.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgVirtIntfIndex
The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.1
ospfNewCfgVirtIntfAreaId
The index of the OSPF area to which this virtual interface
belongs.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.2
ospfNewCfgVirtIntfNbr
The IP Address of the OSPF neighbor for this virtual interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.3
ospfNewCfgVirtIntfMdkey
The MD5/SHA256 key for the OSPF virtual interface
0 (none) no MD5/SHA256 authentication.
Integer32r/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.4
ospfNewCfgVirtIntfHello
Hello interval(1..65535s | 50..65535ms)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.5
ospfNewCfgVirtIntfHelloMS
Units of time measurement fo Hello interval
seconds(0),
milliseconds(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.6
ospfNewCfgVirtIntfDead
Dead interval(1..65535s | 1000..65535ms)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.7
ospfNewCfgVirtIntfDeadMS
Units of time measurement fo Dead interval
seconds(0),
milliseconds(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.8
ospfNewCfgVirtIntfTrans
Transit delay(1..3600)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.9
ospfNewCfgVirtIntfRetra
Retransmit interval(1..3600)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.10
ospfNewCfgVirtIntfAuthKey
Authentication Key SIZE(0..8)
OctetStringr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.11
ospfNewCfgVirtIntfStatus
Status
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.12
ospfNewCfgVirtIntfDelete
Delete
other(0),
delete(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.10.1.13

ospfCurCfgHostTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.12 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgHostTable' 
The table of OSPF Host configuration.
ospfCurCfgHostEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1
Information about a OSPF host.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgHostIndex
The OSPF host number for which the OSPF host table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1.1
ospfCurCfgHostIpAddr
The IP Address of the OSPF host.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1.2
ospfCurCfgHostAreaIndex
The area index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1.3
ospfCurCfgHostCost
The cost of the OSPF host.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1.4
ospfCurCfgHostState
Enable or disable an OSPF Host
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.12.1.5

ospfNewCfgHostTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.13 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgHostTable' 
The table of OSPF Host configuration.
ospfNewCfgHostEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1
Information about a OSPF host.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgHostIndex
The OSPF host number for which the OSPF host table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.1
ospfNewCfgHostIpAddr
The IP Address of the OSPF host.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.2
ospfNewCfgHostAreaIndex
The OSPF area index.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.3
ospfNewCfgHostCost
The cost of the OSPF host.
Integer32r/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.4
ospfNewCfgHostState
Enable or disable an OSPF Host
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.5
ospfNewCfgHostDelete
Delete the OSPF host:
no(0),
yes(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.13.1.6

ospfCurCfgRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.14 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgRangeTable' 
The table of OSPF summary range in the current configuration.
ospfCurCfgRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1
Information about an OSPF summary range.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgRangeIndex
The range number for which the OSPF summary range table is related.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.1
ospfCurCfgRangeAddr
The IP Address of the range.
SNMPv2-SMIIpAddress
Enumerated Values:
0other
1delete
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.2
ospfCurCfgRangeMask
The mask of the range.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.3
ospfCurCfgRangeAreaIndex
The area index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.4
ospfCurCfgRangeHideState
The state of the hide range.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.5
ospfCurCfgRangeState
The state of the range.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.14.1.6

ospfNewCfgRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.15 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgRangeTable' 
The table of OSPF summary range in the new configuration.
ospfNewCfgRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1
Information about an OSPF summary range.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgRangeIndex
The range number for which the OSPF summary range table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.1
ospfNewCfgRangeAddr
The IP Address of the range.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.2
ospfNewCfgRangeMask
The mask of the range.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.3
ospfNewCfgRangeAreaIndex
The area index.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.4
ospfNewCfgRangeHideState
The state of the hide range.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.5
ospfNewCfgRangeState
The state of the range.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.6
ospfNewCfgRangeDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.13.15.1.7

ospfCurCfgLoopIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.20 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfCurCfgLoopIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfCurCfgLoopIfTable' 
The table of OSPF Loopback Interfaces 
in the current configuration block.
ospfCurCfgLoopIfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.20.1
Information about an OSPF Loopback Interface.
Indexes
No indexes recorded
Column Syntax OID
ospfCurCfgLoopIfIndex
The OSPF Loopback Interface number for which
the OSPF Interface table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.20.1.1
ospfCurCfgLoopIfArea
The index of the area that the loopback interface belongs
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.20.1.2
ospfCurCfgLoopIfStatus
Status of the loopback interface
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.13.20.1.3

ospfNewCfgLoopIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.13.21 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfNewCfgLoopIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfNewCfgLoopIfTable' 
The table of OSPF loopback interface in the new configuration block.
ospfNewCfgLoopIfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.13.21.1
Information about an OSPF loopback interface.
Indexes
No indexes recorded
Column Syntax OID
ospfNewCfgLoopIfIndex
The OSPF loopback interface number for which
the OSPF Loopback Interface table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.21.1.1
ospfNewCfgLoopIfArea
The index of the area that the loopback interface belongs (0..5)
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.21.1.2
ospfNewCfgLoopIfStatus
Status of the loopback interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.21.1.3
ospfNewCfgLoopIfDelete
Delete the loopback interface
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.13.21.1.4

ipCurCfgStaticArpTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.15.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgStaticArpTable' 
The table of static ARPs in the current configuration block.
ipCurCfgStaticArpEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1
A row in the static ARP table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgStaticArpIndx
The index of the static ARP table.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.1
ipCurCfgStaticArpIp
The IP address for the ARP entry.
SNMPv2-SMIIpAddress
Constraints:
range: 1-15
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.2
ipCurCfgStaticArpMAC
The MAC address for the ARP entry.
SNMPv2-TCDisplayString
Enumerated Values:
1none
2password
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.3
ipCurCfgStaticArpVlan
The VLAN for the ARP entry.
SNMPv2-SMIInteger32
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.4
ipCurCfgStaticArpPortIndex
The port or any of one of the trunk port for the ARP entry.
PortNumber
Enumerated Values:
1both
2listen
3supply
4none
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.5
ipCurCfgStaticArpPortAlias
The port alias or any of one of the trunk port for the ARP entry..
SNMPv2-TCDisplayString
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.2.1.6

ipNewCfgStaticArpTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.15.3 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgStaticArpTable' 
The table of static ARPs in the new configuration block.
ipNewCfgStaticArpEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1
A row in the static ARP table
Indexes
Column Syntax OID
ipNewCfgStaticArpIndx
The index of the static ARP table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.1
ipNewCfgStaticArpIp
The IP address for the ARP entry.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.2
ipNewCfgStaticArpMAC
The MAC address for the ARP entry.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.3
ipNewCfgStaticArpVlan
The VLAN for the ARP entry.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.4
ipNewCfgStaticArpPortIndex
The port or any one of the trunk port for the ARP entry.
PortNumberr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.5
ipNewCfgStaticArpAction
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.6
ipNewCfgStaticArpPortAlias
The alias of the port for the ARP entry.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.15.3.1.7

ripCurCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.18.1 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ripCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ripCurCfgIntfTable' 
The table of RIP on IP interface in the current configuration block.
ripCurCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1
Information about RIP on IP interface.
Indexes
No indexes recorded
Column Syntax OID
ripCurCfgIntfIndex
The interface number for which the RIP information is related.
SNMPv2-SMIInteger32
Enumerated Values:
1none
2password
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.1
ripCurCfgIntfVersion
RIP version.
Enumeration
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.2
ripCurCfgIntfState
Enable or disable RIP protocol.
Enumeration
Enumerated Values:
1both
2listen
3supply
4none
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.3
ripCurCfgIntfListen
Enable or disable listening to route updates.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.4
ripCurCfgIntfTrigUpdate
Enable or disable triggered updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.6
ripCurCfgIntfMcastUpdate
Enable or disable multicast updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.7
ripCurCfgIntfPoisonReverse
RIP poison reverse.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.8
ripCurCfgIntfSupply
Enable or disable supplying route updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.9
ripCurCfgIntfMetric
RIP route metric for this interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.10
ripCurCfgIntfAuth
The type of Authentication used on this interface.
Enumeration
Enumerated Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.11
ripCurCfgIntfKey
RIP update authentication password.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.12
ripCurCfgIntfDefault
Specifies what RIP does with default routes.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.13
ripCurCfgIntfSplitHorizon
RIP split horizon.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.18.1.1.14

ripNewCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.18.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ripNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ripNewCfgIntfTable' 
The table of RIP on IP interface in the new configuration block.
ripNewCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1
Information about RIP on IP interface.
Indexes
No indexes recorded
Column Syntax OID
ripNewCfgIntfIndex
The interface number for which the RIP information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.1
ripNewCfgIntfVersion
RIP version.
Enumerationr/w
Enumerated Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.2
ripNewCfgIntfSupply
Enable or disable supplying route updates.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.3
ripNewCfgIntfListen
Enable or disable listening to route updates.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.4
ripNewCfgIntfTrigUpdate
Enable or disable triggered updates.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.6
ripNewCfgIntfMcastUpdate
Enable or disable multicast updates.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.7
ripNewCfgIntfPoisonReverse
RIP poison reverse.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.8
ripNewCfgIntfState
Enable or disable RIP protocol.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.9
ripNewCfgIntfMetric
RIP route metric for this interface.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.10
ripNewCfgIntfAuth
The type of Authentication used on this interface.
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.11
ripNewCfgIntfKey
RIP update authentication password.
OctetStringr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.12
ripNewCfgIntfDefault
Specifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.13
ripNewCfgIntfSplitHorizon
RIP split horizon.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.18.2.1.14

igmpStaticMrtrCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpStaticMrtrCurCfgTable' 
The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1
A row in the Static Multicast Router table.
Indexes
No indexes recorded
Column Syntax OID
igmpStaticMrtrCurCfgIndx
The IGMP Multicast Router table port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1.1
igmpStaticMrtrCurCfgPortId
The IGMP Multicast Router port in the current configuration block.
PortNumber
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1.2
igmpStaticMrtrCurCfgVlanId
The IGMP Multicast Router port in the current configuration block.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1.3
igmpStaticMrtrCurCfgVersion
The IGMP version of the IGMP Static Multicast Router.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1.4
igmpStaticMrtrCurCfgPortAlias
The IGMP Multicast Router port alias in the current configuration block.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.1.1.5

igmpStaticMrtrNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpStaticMrtrNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpStaticMrtrNewCfgTable' 
The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1
A row in the Static Multicast Router table.
Indexes
No indexes recorded
Column Syntax OID
igmpStaticMrtrNewCfgIndx
The IGMP Multicast Router table port index.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.1
igmpStaticMrtrNewCfgPortId
The IGMP Multicast Router port in the new configuration block.
PortNumberr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.2
igmpStaticMrtrNewCfgVlanId
The IGMP Multicast Router port in the new configuration block.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.3
igmpStaticMrtrNewCfgVersion
The IGMP version of the IGMP Static Multicast Router.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.4
igmpStaticMrtrNewCfgDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.5
igmpStaticMrtrNewCfgPortAlias
The IGMP Multicast Router port alias in the new configuration block.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.10.2.1.6

igmpFltCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpFltCurCfgTable' 
The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1
A row in the filtering table.
Indexes
No indexes recorded
Column Syntax OID
igmpFltCurCfgIndx
The IGMP filter table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1.1
igmpFltCurCfgMcastIp1
Range1 Multicast IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1.2
igmpFltCurCfgMcastIp2
Range2 Multicast IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1.3
igmpFltCurCfgAction
The action for the IGMP filtering rule.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1.4
igmpFltCurCfgState
The state of this IGMP filtering rule.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.1.1.5

igmpFltNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpFltNewCfgTable' 
The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1
A row in the filtering table.
Indexes
No indexes recorded
Column Syntax OID
igmpFltNewCfgIndx
The IGMP filter table index.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.1
igmpFltNewCfgMcastIp1
Range1 Multicast source IP address to be filtered.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-608
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.2
igmpFltNewCfgMcastIp2
Range2 Multicast source IP address to be filtered.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.3
igmpFltNewCfgAction
The action for the IGMP filtering rule.
Enumerationr/w
Enumerated Values:
1ipv4
2macaddr
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.4
igmpFltNewCfgState
The state of this IGMP filtering rule.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.5
igmpFltNewCfgDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.2.1.6

igmpFltCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpFltCurCfgPortTable' 
The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3.1
A row in the IGMP filtering port table.
Indexes
No indexes recorded
Column Syntax OID
igmpFltCurCfgPortIndx
The port index.
PortNumber
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3.1.1
igmpFltCurCfgPortState
Enable or disable IGMP filtering.
Enumeration
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3.1.2
igmpFltCurCfgPortFiltBmap
The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ …
OctetString
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3.1.3
igmpFltCurCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.3.1.4

igmpFltNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpFltNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpFltNewCfgPortTable' 
The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1
A row in the IGMP filtering port table.
Indexes
No indexes recorded
Column Syntax OID
igmpFltNewCfgPortIndx
The port index.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.1
igmpFltNewCfgPortState
Enable or disable IGMP filtering.
Enumerationr/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.2
igmpFltNewCfgPortFiltBmap
The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ f…
OctetString
Enumerated Values:
1querier
2nonQuerier
3checkingMembership
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.3
igmpFltNewCfgPortAddFiltRule
This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is betw…
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.4
igmpFltNewCfgPortRemFiltRule
This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid inde…
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-608
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.5
igmpFltNewCfgPortAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.11.4.1.6

igmpCurQurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.15 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpCurQurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpCurQurCfgTable' 
The table of IGMP querier configuration.
igmpCurQurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1
A row in the IGMP querier configuration table
Indexes
No indexes recorded
Column Syntax OID
igmpCurQurCfgVlanIndex
The vlan number for which the IGMP querier information is related.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.1
igmpCurQuerierState
Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any othe…
Enumeration
Constraints:
range: 1-608
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.2
igmpCurCfgQuerier
The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the swit…
Enumeration
Constraints:
range: 1-256
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.3
igmpCurCfgQueryInterval
This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.4
igmpCurCfgQurSrcIp
The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.
SNMPv2-SMIIpAddress
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.5
igmpCurCfgElectionType
The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.
Enumeration
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.6
igmpCurCfgQurRobustness
The Robustness Variable allows tuning for the Other
Querier Present Interval.
Integer32
Enumerated Values:
1igmpV1
2igmpV2
3igmpV3
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.7
igmpCurCfgQurStartupCnt
Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.8
igmpCurCfgQurStartupInt
This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
Integer32
Enumerated Values:
1other
2default
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.9
igmpCurCfgQurMaxRespTime
The maximum query response interval advertised in
IGMP queries on this VLAN.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.10
igmpCurCfgOtherQurAddress
The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.11
igmpCurCfgOtherQurPresentInt
The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) time…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.12
igmpCurCfgVlanOperVersion
Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
should be configured on the bas…
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.13
igmpCurVlanOperVersion
Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.14
igmpCurVlanOlderVerTimer
Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.19.15.1.15

igmpNewQurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.19.16 · 1 row entry · 16 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpNewQurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpNewQurCfgTable' 
The table of IGMP querier configuration.
igmpNewQurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1
A row in the IGMP querier configuration table
Indexes
No indexes recorded
Column Syntax OID
igmpNewQurCfgVlanIndex
The vlan number for which the IGMP querier information is related.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.1
igmpNewQuerierState
Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any othe…
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.2
igmpNewCfgQuerier
The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the swit…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.3
igmpNewCfgQueryInterval
This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.4
igmpNewCfgQurSrcIp
The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.5
igmpNewCfgElectionType
The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.6
igmpNewCfgQurRobustness
The Robustness Variable allows tuning for the Other
Querier Present Interval.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.7
igmpNewCfgQurStartupCnt
Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.8
igmpNewCfgQurStartupInt
This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.9
igmpNewCfgQurMaxRespTime
The maximum query response interval advertised in
IGMP queries on this VLAN.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.10
igmpNewCfgOtherQurAddress
The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.11
igmpNewCfgOtherQurPresentInt
The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) time…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.12
igmpNewCfgVlanOperVersion
Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
should be configured on the ba…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.13
igmpNewVlanOperVersion
Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).
Enumeration
Enumerated Values:
0no
2delete
3deletehost
 .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.14
igmpNewVlanOlderVerTimer
Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.15
igmpNewCfgQuerierDefault
Action to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.19.16.1.16

ipmcCurCfgStaticRouteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.20.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipmcCurCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipmcCurCfgStaticRouteTable' 
The table of static IPMC routes in the current configuration block.
ipmcCurCfgStaticRouteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1
A row in the static IPMC route table
Indexes
No indexes recorded
Column Syntax OID
ipmcCurCfgStaticRouteIndx
The index of the IPMC static routing table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.1
ipmcCurCfgStaticRouteDestIp
The destination IPMC address of this IPMC route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.2
ipmcCurCfgStaticRouteVlanId
The vlan id of this route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.3
ipmcCurCfgStaticRouteHostBmap
The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.4
ipmcCurCfgStaticRouteAdminkeys
The LACP port adminkey of this route.
Adminkeys on five positions alligned to right, separated by commas.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.8
ipmcCurCfgStaticRouteTrunks
The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| |…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.2.1.9

ipmcNewCfgStaticRouteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.20.3 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipmcNewCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipmcNewCfgStaticRouteTable' 
The table of IPMC static routes in the new
configuration block.
When creating a new route, Destination IP
and Vlan id must be set first.
The actual change in configuration occurs
on using PortInfo leaf.
ipmcNewCfgStaticRouteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1
A row in the static IPMC route table
Indexes
No indexes recorded
Column Syntax OID
ipmcNewCfgStaticRouteIndx
The index of the IPMC static routing table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.1
ipmcNewCfgStaticRouteDestIp
The destination IPMC address of this route.
It must be set along Vlan id before creating
new route.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.2
ipmcNewCfgStaticRouteVlanId
The vlan id of this route.
It must be set along Destination IP before
creating new route.
SNMPv2-SMIInteger32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.3
ipmcNewCfgStaticRouteHostBmap
The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.4
ipmcNewCfgStaticRouteAddPortIndex
The port to be added to this IPMC route.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.7
ipmcNewCfgStaticRouteTrunks
The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| |…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.8
ipmcNewCfgStaticRouteAddTrunk
The trunk group number to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.9
ipmcNewCfgStaticRouteRemTrunk
The trunk group number to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.10
ipmcNewCfgStaticRouteAdminkeys
The LACP port adminkeys list for to this IPMC route.
Adminkeys on five positions alligned to right, separated by commas
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.11
ipmcNewCfgStaticRouteAddAdminkey
The LACP port adminkey to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.12
ipmcNewCfgStaticRouteRemAdminkey
The LACP port adminkey to be removed from this IPMC route.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.13
ipmcNewCfgStaticRouteDelete
Delete this route.
Enumerationr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.16
ipmcNewCfgStaticRouteRemPortIndex
The port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks.
SNMPv2-SMIInteger32r/w
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.17
ipmcNewCfgStaticRouteAddPortAlias
The port to be added to this IPMC route.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.18
ipmcNewCfgStaticRouteRemPortAlias
The port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.20.3.1.19

ipCurCfgStaticNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.21.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgStaticNbrTable' 
The table of static NBR Cache entries in the current configuration block.
ipCurCfgStaticNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1
A row in the static NBR Cache table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgStaticNbrIndx
The index of the static NBR Cache table.
SNMPv2-SMIInteger32
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.1
ipCurCfgStaticNbrIp
The IP address for the NBR Cache entry.
SNMPv2-TCDisplayString
Enumerated Values:
1other
2delete
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.2
ipCurCfgStaticNbrMAC
The MAC address for the NBR Cache entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.3
ipCurCfgStaticNbrVlan
The VLAN for the NBR Cache entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.4
ipCurCfgStaticNbrPortIndex
The port for the NBR Cache entry.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.5
ipCurCfgStaticNbrPortAlias
The alias of the port for the NBR Cache entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.2.1.6

ipNewCfgStaticNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.21.3 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgStaticNbrTable' 
The table of static NBR Cache entries in the new configuration block.
ipNewCfgStaticNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1
A row in the static NBR Cache table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgStaticNbrIndx
The index of the static NBR Cache table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.1
ipNewCfgStaticNbrIp
The IP address for the NBR Cache entry.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.2
ipNewCfgStaticNbrMAC
The MAC address for the NBR Cache entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.3
ipNewCfgStaticNbrVlan
The VLAN for the NBR Cache entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.4
ipNewCfgStaticNbrPortIndex
The port for the NBR Cache entry.
PortNumberr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.5
ipNewCfgStaticNbrAction
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.6
ipNewCfgStaticNbrPortAlias
The alias of the port for the NBR Cache entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-40
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.21.3.1.7

ipCurCfgGwIpv6Table

table
.1.3.6.1.4.1.26543.2.7.4.3.1.22.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgGwIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgGwIpv6Table' 
The table of IPv6 gateways in the Current configuration Block.
ipCurCfgGwIpv6Entry row .1.3.6.1.4.1.26543.2.7.4.3.1.22.2.1
A row in the Ipv6 gateway table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgGwIpv6Index
The IPv6 gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.22.2.1.1
ipCurCfgGwIpv6Addr
The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx o…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.22.2.1.2
ipCurCfgGwIpv6State
The state of the default IPv6 gateway.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.22.2.1.3

ipNewCfgGwIpv6Table

table
.1.3.6.1.4.1.26543.2.7.4.3.1.22.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgGwIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgGwIpv6Table' 
The table of IPv6 gateways in the new configuration block.
ipNewCfgGwIpv6Entry row .1.3.6.1.4.1.26543.2.7.4.3.1.22.3.1
A row in the Ipv6 gateway table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgGwIpv6Index
The IPv6 gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.22.3.1.1
ipNewCfgGwIpv6Addr
The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx
OctetStringr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.22.3.1.2
ipNewCfgGwIpv6State
The state of the default IPv6 gateway.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.22.3.1.3
ipNewCfgGwIpv6Delete
When set to the value of 2 (delete), the default gw is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the default IPv6 gw.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.22.3.1.4

ipCurCfgStaticRoute6Table

table
.1.3.6.1.4.1.26543.2.7.4.3.1.23.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgStaticRoute6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgStaticRoute6Table' 
The table of static IP6 routes in the current configuration block.
ipCurCfgStaticRoute6Entry row .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1
A row in the static IP6 route table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgStaticRoute6Indx
The index of the static IP6 routing table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1.1
ipCurCfgStaticRoute6DestIp
The destination IP6 address of this route.
SNMPv2-TCDisplayString
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1.2
ipCurCfgStaticRoute6Mask
The destination IP6 prefix len of this route.
Integer32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1.3
ipCurCfgStaticRoute6Gateway
The IP6 address of the gateway for this route.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1.4
ipCurCfgStaticRoute6Interface
The IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.2.1.5

ipNewCfgStaticRoute6Table

table
.1.3.6.1.4.1.26543.2.7.4.3.1.23.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgStaticRoute6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgStaticRoute6Table' 
The table of static IP6 routes in the new configuration block.
ipNewCfgStaticRoute6Entry row .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1
A row in the static IP6 route table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgStaticRoute6Indx
The index of the static IP6 routing table.
SNMPv2-SMIInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.1
ipNewCfgStaticRoute6DestIp
The destination IP6 address of this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:…
OctetStringr/w
Enumerated Values:
1transit
2stub
3nssa
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.2
ipNewCfgStaticRoute6Mask
The prefix length of this route.
Integer32r/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.3
ipNewCfgStaticRoute6Gateway
The IP6 address of the gateway for this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:x…
OctetStringr/w
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.4
ipNewCfgStaticRoute6Action
Set the value '2' to delete the entire route entry.
Value 1 (other) is returned when read.
Enumerationr/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.5
ipNewCfgStaticRoute6Interface
The IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1always
2candidate
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.23.3.1.6

ipCurCfgIntfLoopbackTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.24.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipCurCfgIntfLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipCurCfgIntfLoopbackTable' 
The table of IP Loopback interface configuration.
ipCurCfgIntfLoopbackEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1
A row in the Ip Loopback interface table
Indexes
No indexes recorded
Column Syntax OID
ipCurCfgIntfLoopbackIndex
The Loopback interface number for which the IP information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1.1
ipCurCfgIntfLoopbackAddr
The IP address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1.2
ipCurCfgIntfLoopbackMask
The subnet mask of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1.3
ipCurCfgIntfLoopbackBroadcast
The broadcast address of the interface.
SNMPv2-SMIIpAddress
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1.4
ipCurCfgIntfLoopbackState
The state of the interface.
Enumeration
Enumerated Values:
1transit
2stub
3nssa
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.2.1.6

ipNewCfgIntfLoopbackTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.24.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipNewCfgIntfLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipNewCfgIntfLoopbackTable' 
The table of loopback interface in the new configuration block.
ipNewCfgIntfLoopbackEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1
A row in the Ip Loopback interface table
Indexes
No indexes recorded
Column Syntax OID
ipNewCfgIntfLoopbackIndex
The Loopback interface number for which the IP information is related.
SNMPv2-SMIInteger32
Constraints:
range: 1-3
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1.1
ipNewCfgIntfLoopbackAddr
The IP address of the interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1always
2candidate
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1.2
ipNewCfgIntfLoopbackMask
The subnet mask of the interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1.3
ipNewCfgIntfLoopbackState
The state of the interface.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1.6
ipNewCfgIntfLoopbackDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.24.3.1.7

ospf3CurCfgAreaTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.2 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgAreaTable' 
The table of OSPFv3 area in the current configuration block.
ospf3CurCfgAreaEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1
Information about a OSPFv3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgAreaIndex
The OSPFv3 area number for which the OSPFv3 area table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.1
ospf3CurCfgAreaId
The IP Address of the OSPFv3 area.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.2
ospf3CurCfgAreaStbInterval
The stability interval for the NSSA area
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.3
ospf3CurCfgAreaType
Type of Area.
transit(1)
stub(2)
nssa(3)
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.4
ospf3CurCfgAreaNoSumm
Status
disabled(0)
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.5
ospf3CurCfgAreaDefaultMetric
Metric for stub/NSSA area (1-16777215)
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.6
ospf3CurCfgAreaDefaultMetricType
Metric Type for stub/NSSA area (1-3)
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.7
ospf3CurCfgAreaTranslRole
Translation role for the NSSA area.
always(1)
candidate(2)
Enumeration
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.8
ospf3CurCfgAreaStatus
Status
disabled(0)
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.2.1.9

ospf3NewCfgAreaTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.3 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgAreaTable' 
The table of OSPFv3 Area configuration in the new configuration block.
ospf3NewCfgAreaEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1
Information about a OSPFv3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgAreaIndex
The OSPFv3 area number for which the OSPFv3 area table is related.
SNMPv2-SMIInteger32
Enumerated Values:
0no
1yes
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.1
ospf3NewCfgAreaId
The IP Address of the OSPFv3 area.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.2
ospf3NewCfgAreaStbInterval
The Stability interval for the NSSA area.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.3
ospf3NewCfgAreaType
Type of Area.
transit(1)
stub(2)
nssa(3)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.4
ospf3NewCfgAreaNoSumm
Status
disabled(0)
enabled(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.5
ospf3NewCfgAreaDefaultMetric
Metric for stub/NSSA area (1-16777215)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.6
ospf3NewCfgAreaDefaultMetricType
Metric Type for stub/NSSA area (1-3)
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.7
ospf3NewCfgAreaTranslRole
Translation role for the NSSA area.
always(1)
candidate(2)
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.8
ospf3NewCfgAreaStatus
Status
disabled(0)
enabled(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.9
ospf3NewCfgAreaDelete
Delete the area
no(0),
yes(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.3.1.10

ospf3CurCfgHostTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.4 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgHostTable' 
The table of OSPFv3 Host configuration.
ospf3CurCfgHostEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1
Information about a OSPFv3 host.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgHostIndex
The OSPFv3 host number for which the OSPFv3 host table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1.1
ospf3CurCfgHostIpAddr
The IPv6 Address of the OSPFv3 host.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1.2
ospf3CurCfgHostAreaIndex
The area index.
SNMPv2-SMIInteger32
Enumerated Values:
2enabled
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1.3
ospf3CurCfgHostCost
The cost of the OSPFv3 host.
Integer32
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1.4
ospf3CurCfgHostState
Enable or disable an OSPFv3 Host
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.4.1.5

ospf3NewCfgHostTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.5 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgHostTable' 
The table of OSPFv3 Host configuration.
ospf3NewCfgHostEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1
Information about a OSPFv3 host.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgHostIndex
The OSPFv3 host number for which the OSPFv3 host table is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.1
ospf3NewCfgHostIpAddr
The IP6 Address of the OSPFv3 host.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or…
OctetStringr/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.2
ospf3NewCfgHostAreaIndex
The OSPFv3 area index.
SNMPv2-SMIInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.3
ospf3NewCfgHostCost
The cost of the OSPFv3 host.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.4
ospf3NewCfgHostState
Enable or disable an OSPFv3 Host
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.5
ospf3NewCfgHostDelete
Delete the OSPFv3 host:
no(0),
yes(1)
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.5.1.6

ospf3CurCfgNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.6 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgNbrTable' 
The table of OSPFv3 Neighbor configuration.
ospf3CurCfgNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1
Information about a OSPFv3 neighbor.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgNbrIndex
The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.
SNMPv2-SMIInteger32
Constraints:
range: 1-1800
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1.1
ospf3CurCfgNbrIpAddr
The IPv6 Address of the OSPFv3 neighbor.
SNMPv2-TCDisplayString
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1.2
ospf3CurCfgNbrIntfIndex
The interface index.
SNMPv2-SMIInteger32
Enumerated Values:
1broadcast
2non-broadcast
3point-to-point
4point-to-multipoint
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1.3
ospf3CurCfgNbrPriority
The priority of the OSPFv3 neighbor.
Integer32
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1.4
ospf3CurCfgNbrState
Enable or disable an OSPFv3 neighbor
Enumeration
Constraints:
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.6.1.5

ospf3NewCfgNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.7 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgNbrTable' 
The table of OSPFv3 Neighbor configuration.
ospf3NewCfgNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1
Information about a OSPFv3 neighbor.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgNbrIndex
The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.
SNMPv2-SMIInteger32
Constraints:
range: 4-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.1
ospf3NewCfgNbrIpAddr
The IP6 Address of the OSPFv3 neighbor.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxx…
OctetStringr/w
Constraints:
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.2
ospf3NewCfgNbrIntfIndex
The OSPFv3 interface index.
SNMPv2-SMIInteger32r/w
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.3
ospf3NewCfgNbrPriority
The cost of the OSPFv3 neighbor.
Integer32r/w
Enumerated Values:
0null
3aes
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.4
ospf3NewCfgNbrState
Enable or disable an OSPFv3 Neighbor
Enumerationr/w
Constraints:
range: 4-48
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.5
ospf3NewCfgNbrDelete
Delete the OSPFv3 neighbor:
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0none
1sha1
2md5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.7.1.6

ospf3CurCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.8 · 1 row entry · 24 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgIntfTable' 
The table of OSPFv3 Interface in the current configuration block.
ospf3CurCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1
Information about an OSPFv3 Interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgIntfIndex
The OSPFv3 Interface number for which the OSPFv3 Interface table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.1
ospf3CurCfgIntfInstId
Interface Instance Id
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.2
ospf3CurCfgIntfArea
The index of the area that the interface belongs
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.3
ospf3CurCfgIntfCost
Interface cost
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.4
ospf3CurCfgIntfPrio
Interface router priority
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.5
ospf3CurCfgIntfHello
Hello interval
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.6
ospf3CurCfgIntfDead
Dead interval
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.7
ospf3CurCfgIntfPoll
Poll interval(1..4294967295)
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.8
ospf3CurCfgIntfTrans
Transmit delay
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.9
ospf3CurCfgIntfRetra
Retransmit interval
Integer32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.10
ospf3CurCfgIntfPassive
Passive interface
disabled(0),
enabled(1)
Enumeration
Constraints:
range: 1-1800
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.11
ospf3CurCfgIntfNetworkType
Network Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
Enumeration
Constraints:
range: 1-1800
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.12
ospf3CurCfgIntfStatus
Status of the interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.16
ospf3CurCfgIntfAuthSpi
Spi Id(256 - 4294967295)
Unsigned32
Enumerated Values:
1broadcast
2non-broadcast
3point-to-point
4point-to-multipoint
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.17
ospf3CurCfgIntfAuthEnable
Status
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.18
ospf3CurCfgIntfAuthType
Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Enumerated Values:
0other
1delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.19
ospf3CurCfgIntfAuthKey
Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Constraints:
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.20
ospf3CurCfgIntfEncrySpi
Spi Id(256 - 4294967295)
Unsigned32
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.21
ospf3CurCfgIntfEncryEnable
Status
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0none
1sha1
2md5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.22
ospf3CurCfgIntfEncryType
Encryption Type
null(0),
aes(3)
Enumeration
Constraints:
range: 4-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.23
ospf3CurCfgIntfEncryKey
Encryption Key
Hex-string AES key - 32 chars (128 bits)
OctetString
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.24
ospf3CurCfgIntfEncryAuthType
Encryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration
Constraints:
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.25
ospf3CurCfgIntfEncryAuthKey
Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.26
ospf3CurCfgIntfLsaSupress
LSA Supression on interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0null
3aes
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.8.1.27

ospf3NewCfgIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.9 · 1 row entry · 27 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgIntfTable' 
The table of OSPFv3 interface in the new configuration block.
ospf3NewCfgIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1
Information about an OSPFv3 interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgIntfIndex
The OSPFv3 Interface number for which the OSPFv3 Interface table is
related.
SNMPv2-SMIInteger32
Constraints:
range: 4-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.1
ospf3NewCfgIntfInstId
Interface Instance Id (0..255)
Integer32r/w
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.2
ospf3NewCfgIntfArea
The index of the area that the interface belongs (0..5)
Integer32r/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.3
ospf3NewCfgIntfCost
Interface cost(1..65535) and 0 for none
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.4
ospf3NewCfgIntfPrio
Interface router priority(0..255)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.5
ospf3NewCfgIntfHello
Hello interval(1..65535)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.6
ospf3NewCfgIntfDead
Dead interval(1..65535)
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.7
ospf3NewCfgIntfPoll
Poll interval(1..4294967295)
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.8
ospf3NewCfgIntfTrans
Transmit delay(1..1800)
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.9
ospf3NewCfgIntfRetra
Retransmit interval(1..1800)
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.10
ospf3NewCfgIntfPassive
Passive interface
disabled(0),
enabled(1)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.11
ospf3NewCfgIntfNetworkType
Network Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.12
ospf3NewCfgIntfStatus
Status of the interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.16
ospf3NewCfgIntfDelete
Delete the interface
other(0),
delete(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.17
ospf3NewCfgIntfAuthSpi
Authentication Spi Id(256 - 4294967295)
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.18
ospf3NewCfgIntfAuthEnable
Authentication Status
disabled(0),
enabled(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.19
ospf3NewCfgIntfAuthType
Authentication Type
none(0),
md5(2),
sha1(1)
Enumerationr/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.20
ospf3NewCfgIntfAuthKey
Authentication Type
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.21
ospf3NewCfgIntfAuthReset
Reset AH configuration
other(0),
reset(1)
Enumerationr/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.22
ospf3NewCfgIntfEncrySpi
Encryption Spi Id(256 - 4294967295)
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.23
ospf3NewCfgIntfEncryEnable
Encryption Status
disabled(0),
enabled(1)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.24
ospf3NewCfgIntfEncryType
Encryption Type
null(0),
aes(3)
Enumerationr/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.25
ospf3NewCfgIntfEncryKey
Encryption Key
Hex-string AES key - 32 chars (128 bits)
OctetStringr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.26
ospf3NewCfgIntfEncryAuthType
Encryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumerationr/w
Enumerated Values:
0other
1delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.27
ospf3NewCfgIntfEncryAuthKey
Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.28
ospf3NewCfgIntfEncryReset
Reset Encryption configuration
other(0),
reset(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.29
ospf3NewCfgIntfLsaSupress
LSA Supression on interface
disabled(0),
enabled(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.9.1.30

ospf3CurCfgVirtIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.10 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgVirtIntfTable' 
The table of OSPFv3 Virtual Interface configuration in the current 
configuration.
ospf3CurCfgVirtIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1
Information about an OSPFv3v3 virtual Interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgVirtIntfIndex
The OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.1
ospf3CurCfgVirtIntfAreaId
The index of the OSPFv3 area to which this virtual interface
belongs.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.3
ospf3CurCfgVirtIntfNbr
The IP Address of the OSPFv3 neighbor for this virtual interface.
SNMPv2-SMIIpAddress
Enumerated Values:
8195summary
8199type7
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.4
ospf3CurCfgVirtIntfHello
Hello interval
Integer32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.5
ospf3CurCfgVirtIntfDead
Dead interval
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.6
ospf3CurCfgVirtIntfTrans
Transmit delay
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.7
ospf3CurCfgVirtIntfRetra
Retransmit interval
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.8
ospf3CurCfgVirtIntfStatus
Status
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.10.1.9

ospf3NewCfgVirtIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.11 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgVirtIntfTable' 
The table of OSPFv3 Virtual interface in the new configuration block.
ospf3NewCfgVirtIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1
Information about an OSPFv3 virtual interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgVirtIntfIndex
The OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.1
ospf3NewCfgVirtIntfAreaId
The index of the OSPFv3 area to which this virtual interface
belongs.
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.3
ospf3NewCfgVirtIntfNbr
The IP Address of the OSPFv3 neighbor for this virtual interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
8195summary
8199type7
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.4
ospf3NewCfgVirtIntfHello
Hello interval(1..65535)
Integer32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.5
ospf3NewCfgVirtIntfDead
Dead interval(1..65535)
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.6
ospf3NewCfgVirtIntfTrans
Transmit delay(1..3600)
Integer32r/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.7
ospf3NewCfgVirtIntfRetra
Retransmit interval(1..3600)
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.8
ospf3NewCfgVirtIntfStatus
Status
disabled(0),
enabled(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.9
ospf3NewCfgVirtIntfDelete
Delete
other(0),
delete(1)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.11.1.10

ospf3CurCfgRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.12 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgRangeTable' 
The table of OSPFv3 summary range in the current configuration.
ospf3CurCfgRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1
Information about an OSPFv3 summary range.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgRangeIndex
The range number for which the OSPFv3 summary range table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.1
ospf3CurCfgRangeAddr
The IPv6 Address of the range.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.2
ospf3CurCfgRangePrefixLen
The prefix length of the range.
Integer32
Enumerated Values:
1advertise
2not-advertise
3allowAll
4denyAll
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.3
ospf3CurCfgRangeAreaIndex
The area index.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.4
ospf3CurCfgRangeHideState
The state of the hide range.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.5
ospf3CurCfgRangeLsaType
The LSA type for aggregation.
summary(8195),
type7(8199)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.6
ospf3CurCfgRangeRouteTag
The route tag of the range.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.7
ospf3CurCfgRangeState
The state of the range.
Enumeration
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.12.1.8

ospf3NewCfgRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.13 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgRangeTable' 
The table of OSPFv3 summary range in the new configuration.
ospf3NewCfgRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1
Information about an OSPFv3 summary range.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgRangeIndex
The range number for which the OSPFv3 summary range table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.1
ospf3NewCfgRangeAddr
The IPv6 Address of the range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xx…
OctetStringr/w
Enumerated Values:
1advertise
2not-advertise
3allowAll
4denyAll
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.2
ospf3NewCfgRangePrefixLen
The prefix length of the range.
Integer32r/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.3
ospf3NewCfgRangeAreaIndex
The area index.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.4
ospf3NewCfgRangeHideState
The state of the hide range.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.5
ospf3NewCfgRangeLsaType
The LSA type for aggregation.
summary(8195),
type7(8199)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.6
ospf3NewCfgRangeRouteTag
The route tag of the range.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.7
ospf3NewCfgRangeState
The state of the range.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.8
ospf3NewCfgRangeDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.13.1.9

ospf3CurCfgExtRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.14 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgExtRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgExtRangeTable' 
The table of OSPFv3 AS-External range in the current configuration.
ospf3CurCfgExtRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1
Information about an OSPFv3 AS-External range.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgExtRangeIndex
The range number for which the OSPFv3 AS-External range table is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.1
ospf3CurCfgExtRangeAddr
The IPv6 Address of the AS-External range.
SNMPv2-TCDisplayString
Enumerated Values:
0auto
1manual
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.2
ospf3CurCfgExtRangePrefixLen
The prefix length of the AS-External range.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.3
ospf3CurCfgExtRangeAreaIndex
The area index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.4
ospf3CurCfgExtRangeTranslation
The state of the setting the P-bit in the generated LSA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.5
ospf3CurCfgExtRangeAggrEffect
The aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.6
ospf3CurCfgExtRangeState
The state of the AS-External range.
Enumeration
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.14.1.7

ospf3NewCfgExtRangeTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.15 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgExtRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgExtRangeTable' 
The table of OSPFv3 summary AS-External range in the new configuration.
ospf3NewCfgExtRangeEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1
Information about an OSPFv3 summary AS-External range.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgExtRangeIndex
The range number for which the OSPFv3 AS-External range table is related.
SNMPv2-SMIInteger32
Enumerated Values:
3asExttype1
4asExttype2
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.1
ospf3NewCfgExtRangeAddr
The IPv6 Address of the AS-External range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:…
OctetStringr/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.2
ospf3NewCfgExtRangePrefixLen
The prefix length of the AS-External range.
Integer32r/w
Enumerated Values:
0auto
1manual
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.3
ospf3NewCfgExtRangeAreaIndex
The area index.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.4
ospf3NewCfgExtRangeTranslation
The state of the setting the P-bit in the generated LSA.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.5
ospf3NewCfgExtRangeAggrEffect
The aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.6
ospf3NewCfgExtRangeState
The state of the AS-External range.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.7
ospf3NewCfgExtRangeDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.15.1.8

ospf3CurCfgRedistTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.16 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3CurCfgRedistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3CurCfgRedistTable' 
The table of OSPFv3 redistribution entries in the current configuration.
ospf3CurCfgRedistEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1
Information about an OSPFv3 redistribution entry.
Indexes
No indexes recorded
Column Syntax OID
ospf3CurCfgRedistIndex
The redistribution entry number for which the OSPFv3 redistribution entry table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.1
ospf3CurCfgRedistAddr
The IPv6 Address of the redistribution entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.2
ospf3CurCfgRedistPrefixLen
The prefix length of the redistribution entry.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.3
ospf3CurCfgRedistMetric
The metric to be applied to the route.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.4
ospf3CurCfgRedistMetricType
The metric type.
asExttype1(3),
asExttype2(4)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.5
ospf3CurCfgRedistRouteTag
The route tag of the redistribution entry.
Unsigned32
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.6
ospf3CurCfgRedistRouteTagTypeManual
Indicates if the route tag is set manually.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.7
ospf3CurCfgRedistState
The state of the redistribution entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.26.16.1.8

ospf3NewCfgRedistTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.26.17 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3NewCfgRedistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3NewCfgRedistTable' 
The table of OSPFv3 summary redistribution entry in the new configuration.
ospf3NewCfgRedistEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1
Information about an OSPFv3 summary redistribution entry.
Indexes
No indexes recorded
Column Syntax OID
ospf3NewCfgRedistIndex
The redistribution entry number for which the OSPFv3 redistribution entry table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.1
ospf3NewCfgRedistAddr
The IPv6 Address of the redistribution entry.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xx…
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.2
ospf3NewCfgRedistPrefixLen
The prefix length of the redistribution entry.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.3
ospf3NewCfgRedistMetric
The metric to be applied to the route.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.4
ospf3NewCfgRedistMetricType
The metric type.
asExttype1(3),
asExttype2(4)
Enumerationr/w
Enumerated Values:
1mldv1
2mldv2
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.5
ospf3NewCfgRedistRouteTag
The route tag of the redistribution entry.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.6
ospf3NewCfgRedistRouteTagTypeManual
Indicates if the route tag is set manually.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.7
ospf3NewCfgRedistState
The state of the redistribution entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.8
ospf3NewCfgRedistDelete
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.26.17.1.9

pptCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.27.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pptCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::pptCurCfgTable' 
The table of prefix policy table entries in the current configuration block.
pptCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1
A row in the prefix policy table
Indexes
No indexes recorded
Column Syntax OID
pptCurCfgIndx
The index of the prefix policy table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1.1
pptCurCfgPrefix
The prefix address for the prefix policy table entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1.2
pptCurCfgPrefixLen
The prefix length for the prefix policy table entry.
SNMPv2-SMIInteger32
Constraints:
range: 2-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1.3
pptCurCfgPrecedence
The precedence for the prefix policy table entry.
SNMPv2-SMIInteger32
Enumerated Values:
1mldv1
2mldv2
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1.4
pptCurCfgLabel
The label for the prefix policy table entry.
SNMPv2-SMIInteger32
Constraints:
range: 1000-65535
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.2.1.5

pptNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.27.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk pptNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::pptNewCfgTable' 
The table of prefix policy table entries in the new configuration block.
pptNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1
A row in the prefix policy table
Indexes
No indexes recorded
Column Syntax OID
pptNewCfgIndx
The index of the prefix policy table.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.1
pptNewCfgPrefix
The prefix address for the prefix policy table entry.
OctetStringr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.2
pptNewCfgPrefixLen
The prefix length the prefix policy table entry.
SNMPv2-SMIInteger32r/w
Enumerated Values:
1other
2default
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.3
pptNewCfgPrecedence
The precedence for the prefix policy table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.4
pptNewCfgLabel
The label for the prefix policy table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.5
pptNewCfgAction
When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.27.3.1.6

mldCurInterfaceTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.30.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldCurInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldCurInterfaceTable' 
The (conceptual) table listing the interfaces on which
MLD is enabled.
mldCurInterfaceEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1
An entry (conceptual row) representing an interface on
which MLD is enabled.
Indexes
No indexes recorded
Column Syntax OID
mldCurInterfaceIfIndex
The internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.1
mldCurInterfaceQueryInterval
The frequency at which MLD Host-Query packets are
transmitted on this interface.
secondsSNMPv2-SMIInteger32
Constraints:
range: 0-127
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.2
mldCurInterfaceVersion
The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
Enumeration
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.3
mldCurInterfaceQueryMaxResponseIntvl
The maximum query response time advertised in MLD
queries on this interface.
secondsSNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.4
mldCurInterfaceRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. T…
SNMPv2-SMIInteger32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.5
mldCurInterfaceLastListenQueryIntvl
The Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value m…
secondsSNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.6
mldCurInterfaceDMrtrEna
Dynamic MRouter learning.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.7
mldCurInterfaceState
State of the MLD interface.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.3.1.8

mldNewInterfaceTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.30.4 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldNewInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldNewInterfaceTable' 
The (conceptual) table listing the interfaces on which
MLD is enabled.
mldNewInterfaceEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1
An entry (conceptual row) representing an interface on
which MLD is enabled.
Indexes
No indexes recorded
Column Syntax OID
mldNewInterfaceIfIndex
The internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.1
mldNewInterfaceQueryInterval
The frequency at which MLD Host-Query packets are
transmitted on this interface.
secondsInteger32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.2
mldNewInterfaceVersion
The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.3
mldNewInterfaceQueryMaxResponseIntvl
The maximum query response time advertised in MLD
queries on this interface.
secondsInteger32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.4
mldNewInterfaceRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. T…
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.5
mldNewInterfaceLastListenQueryIntvl
The Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value m…
secondsInteger32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.6
mldNewInterfaceDMrtrEna
Dynamic MRouter learning.
Enumerationr/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.7
mldNewInterfaceState
State of the MLD interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.8
mldNewInterfaceDefault
Action to set the MLD interface configuration to default.
Returns other(1) when read.
Enumerationr/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.30.4.1.9

ndprefixCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.31.2 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ndprefixCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ndprefixCurCfgTable' 
The ndprefix table entries in the current configuration block.
ndprefixCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1
A row in the ndprefix table.
Indexes
No indexes recorded
Column Syntax OID
ndprefixCurCfgIndx
The index of the ndprefix table.
Integer32
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.1
ndprefixCurCfgPrefix
The prefix address for the prefix table entry.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.2
ndprefixCurCfgPrefixLen
The prefix length for the prefix table entry.
Integer32
Enumerated Values:
1other
2delete
3deleteall
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.3
ndprefixCurCfgInterfaceIndex
The interface index for the prefix table entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.4
ndprefixCurCfgProfileIndex
The profile index for the prefix table entry
Profile 0 is the default profile.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.5
ndprefixCurCfgValidLifetime
The Valid lifetime for the prefix table entry.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.6
ndprefixCurCfgValidLifetimeFlag
The Valid lifetime fixed flag for the prefix table entry.
Enumeration
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.7
ndprefixCurCfgPreferredLifetime
The Preferred Lifetime for the prefix table entry.
Unsigned32
Constraints:
range: 1-256
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.8
ndprefixCurCfgPreferredLifetimeFlag
The Preferred Lifetime fixed flag for the prefix table entry.
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.9
ndprefixCurCfgOnlinkFlag
The Onlink flag for the prefix table entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.10
ndprefixCurCfgAutonomousFlag
The Autonomous flag for the prefix table entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.11
ndprefixCurCfgState
The state for the prefix table entry.
Enumeration
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.2.1.12

ndprefixNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.31.3 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ndprefixNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ndprefixNewCfgTable' 
The ndprefix table entries in the new configuration block.
ndprefixNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1
A row in the prefix table
Indexes
No indexes recorded
Column Syntax OID
ndprefixNewCfgIndx
The index of the prefix table.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.1
ndprefixNewCfgPrefix
The prefix address for the prefix table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.2
ndprefixNewCfgPrefixLen
The prefix length for the prefix table entry.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.3
ndprefixNewCfgInterfaceIndex
The interface index for the prefix table entry.
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.4
ndprefixNewCfgProfileIndex
The profile index for the prefix table entry.
Profile 0 is the default profile.
Integer32r/w
Enumerated Values:
0none
1ah-sha1
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.5
ndprefixNewCfgValidLifetime
The Valid lifetime for the prefix table entry.
Unsigned32r/w
Enumerated Values:
0esp-null
1esp-3des
2esp-aes-cbc
3unspecified
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.6
ndprefixNewCfgValidLifetimeFlag
The Valid lifetime fixed flag for the prefix table entry.
Enumerationr/w
Enumerated Values:
0none
1esp-sha1
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.7
ndprefixNewCfgPreferredLifetime
The Preferred Lifetime for the prefix table entry.
Unsigned32r/w
Enumerated Values:
1transport
2tunnel
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.8
ndprefixNewCfgPreferredLifetimeFlag
The Preferred Lifetime fixed flag for the prefix table entry.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.9
ndprefixNewCfgOnlinkFlag
The Onlink flag for the prefix table entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.10
ndprefixNewCfgAutonomousFlag
The Autonomous flag for the prefix table entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.11
ndprefixNewCfgState
The state for the prefix table entry.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.12
ndprefixNewCfgAction
When set to the value of 2 (delete), the entire row is deleted.
When set to the value of 3 (deleteall), all entries are deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) or 3(de…
Enumerationr/w
Enumerated Values:
0none
1ah-sha1
 .1.3.6.1.4.1.26543.2.7.4.3.1.31.3.1.13

ikeCurCfgPskRemoteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ikeCurCfgPskRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ikeCurCfgPskRemoteTable' 
The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2.
ikeCurCfgPskRemoteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2.1
An entry (conceptual row) representing a remote pre-shared key for a peer address.
Indexes
No indexes recorded
Column Syntax OID
ikeCurCfgPskRemoteIndex
The index of ikeCurCfgPskRemoteTable.
Unsigned32
Enumerated Values:
1transport
2tunnel
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2.1.1
ikeCurCfgPskRemoteAddr
Current IPv6 address of peer.
OctetString
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2.1.2
ikeCurCfgPskRemoteKey
Current remote pre-shared key.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2.1.3
ikeCurCfgPskRemoteDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.3.2.1.4

ikeNewCfgPskRemoteTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ikeNewCfgPskRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ikeNewCfgPskRemoteTable' 
The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2.
ikeNewCfgPskRemoteEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2.1
An entry (conceptual row) representing a remote pre-shared key for a peer address.
Indexes
No indexes recorded
Column Syntax OID
ikeNewCfgPskRemoteIndex
The index of ikeNewCfgPskRemoteTable.
Unsigned32
Enumerated Values:
0unspecified
1tcp
2icmp
3any
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2.1.1
ikeNewCfgPskRemoteAddr
New IPv6 address of peer.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2.1.2
ikeNewCfgPskRemoteKey
New remote pre-shared key.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2.1.3
ikeNewCfgPskRemoteDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.1.4.2.1.4

ipsecCurCfgTxformTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgTxformTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecCurCfgTxformTable' 
The (conceptual) table listing all of the IPsec transform-set.
ipsecCurCfgTxformEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1
An entry (conceptual row) representing a IPsec transform-set.
Indexes
No indexes recorded
Column Syntax OID
ipsecCurCfgTxformIndex
The index of ipsecCurCfgTxformTable.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.1
ipsecCurCfgTxformAuth
The authentication algorithm of the IPsec transform-set
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.2
ipsecCurCfgTxformCipher
The encryption algorithm of the IPsec transform-set
Enumeration
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.3
ipsecCurCfgTxformIntegrity
The interity algorithm of the IPsec transform-set
Enumeration
Enumerated Values:
0unspecified
1permit
2deny
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.4
ipsecCurCfgTxformMode
The tunnel/transport mode of the IPsec transform-set
Enumeration
Enumerated Values:
0unspecified
1tcp
2icmp
3any
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.5
ipsecCurCfgTxformDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.3.1.6

ipsecNewCfgTxformTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgTxformTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecNewCfgTxformTable' 
The (conceptual) table listing all of the new IPsec transform-set to be apply.
ipsecNewCfgTxformEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1
An entry (conceptual row) representing a IPsec transform-set.
Indexes
No indexes recorded
Column Syntax OID
ipsecNewCfgTxformIndex
The index of ipsecNewCfgTxformTable.
Unsigned32
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.1
ipsecNewCfgTxformAuth
The authentication algorithm of the IPsec transform-set
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.2
ipsecNewCfgTxformCipher
The encryption algorithm of the IPsec transform-set
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.3
ipsecNewCfgTxformIntegrity
The interity algorithm of the IPsec transform-set
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.4
ipsecNewCfgTxformMode
The tunnel/transport mode of the IPsec transform-set
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.5
ipsecNewCfgTxformDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.4.1.6

ipsecCurCfgSelectorTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgSelectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecCurCfgSelectorTable' 
The (conceptual) table listing all of the IPsec selector.
ipsecCurCfgSelectorEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1
An entry (conceptual row) representing a IPsec selector.
Indexes
No indexes recorded
Column Syntax OID
ipsecCurCfgSelectorIndex
The index of ipsecCurCfgSelectorTable.
Unsigned32
Constraints:
range: 120-86400
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.1
ipsecCurCfgSelectorAction
The action of the IPsec selector
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.2
ipsecCurCfgSelectorProto
The protocol of the IPsec selector
Enumeration
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.3
ipsecCurCfgSelectorIcmpType
When the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.4
ipsecCurCfgSelectorDst
The destination ip address of the IPsec selector
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.6
ipsecCurCfgSelectorDstPrefix
The destination ipv6 address prefix length of the IPsec selector
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.7
ipsecCurCfgSelectorSrc
The source ip address of the IPsec selector
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.8
ipsecCurCfgSelectorDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.5.1.9

ipsecNewCfgSelectorTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgSelectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecNewCfgSelectorTable' 
The (conceptual) table listing all of the IPsec selector.
ipsecNewCfgSelectorEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1
An entry (conceptual row) representing a IPsec selector.
Indexes
No indexes recorded
Column Syntax OID
ipsecNewCfgSelectorIndex
The index of ipsecNewCfgSelectorTable.
Unsigned32
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.1
ipsecNewCfgSelectorAction
The action of the IPsec selector
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.2
ipsecNewCfgSelectorProto
The protocol of the IPsec selector
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.3
ipsecNewCfgSelectorIcmpType
When the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.4
ipsecNewCfgSelectorDst
The destination ipv6 address of the IPsec selector
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.6
ipsecNewCfgSelectorDstPrefix
The destination ipv6 address prefix length of the IPsec selector
Unsigned32r/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.7
ipsecNewCfgSelectorSrc
The source ip address of the IPsec selector
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.8
ipsecNewCfgSelectorDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.6.1.9

ipsecCurCfgDynamicPolicyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgDynamicPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecCurCfgDynamicPolicyTable' 
The (conceptual) table listing all of the IPsec dynamic policies.
ipsecCurCfgDynamicPolicyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1
An entry (conceptual row) representing a IPsec dynamic policy.
Indexes
No indexes recorded
Column Syntax OID
ipsecCurCfgDynamicPolicyIndex
The index of ipsecCurCfgDynamicPolicyTable.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.1
ipsecCurCfgDynamicPolicyPeer
The remote peer ip address.
OctetString
Constraints:
range: 0-0
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.2
ipsecCurCfgDynamicPolicySelector
The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable. 0 = unspecified.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.3
ipsecCurCfgDynamicPolicyTxform
The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable. 0 = unspecified.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.4
ipsecCurCfgDynamicPolicyLifetime
The SA lifetime for an IPsec policy.
Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.5
ipsecCurCfgDynamicPolicyPfs
Enable/disable perfect forward security.
Enumeration
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.6
ipsecCurCfgDynamicPolicyDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.7.1.7

ipsecNewCfgDynamicPolicyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgDynamicPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecNewCfgDynamicPolicyTable' 
The (conceptual) table listing all of the IPsec dynamic policies.
ipsecNewCfgDynamicPolicyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1
An entry (conceptual row) representing a IPsec dynamic policy.
Indexes
No indexes recorded
Column Syntax OID
ipsecNewCfgDynamicPolicyIndex
The index of ipsecNewCfgDynamicPolicyTable.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.1
ipsecNewCfgDynamicPolicyPeer
The remote peer ip address.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.2
ipsecNewCfgDynamicPolicySelector
The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable. 0 = unspecified.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.3
ipsecNewCfgDynamicPolicyTxform
The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable. 0 = unspecified.
Unsigned32r/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.4
ipsecNewCfgDynamicPolicyLifetime
The SA lifetime for an IPsec policy.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.5
ipsecNewCfgDynamicPolicyPfs
Enable/disable perfect forward security.
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.6
ipsecNewCfgDynamicPolicyDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.8.1.7

ipsecCurCfgManualPolicyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgManualPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecCurCfgManualPolicyTable' 
The (conceptual) table listing all of the IPsec manual policies.
ipsecCurCfgManualPolicyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1
An entry (conceptual row) representing a IPsec manual policy.
Indexes
No indexes recorded
Column Syntax OID
ipsecCurCfgManualPolicyIndex
The index of ipsecCurCfgManualPolicyTable.
Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.1
ipsecCurCfgManualPolicyPeer
The remote peer ip address.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.2
ipsecCurCfgManualPolicySelector
The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.3
ipsecCurCfgManualPolicyTxform
The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable
Unsigned32
Constraints:
range: 0-0
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.4
ipsecCurCfgManualPolicyInAhKey
The AH inbound session key for an IPsec policy.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.5
ipsecCurCfgManualPolicyInAhSpi
The AH inbound SPI for an IPsec policy.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.6
ipsecCurCfgManualPolicyOutAhKey
The AH outbound session key for an IPsec policy.
OctetString
Constraints:
range: 0-0
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.7
ipsecCurCfgManualPolicyOutAhSpi
The AH outbound SPI for an IPsec policy.
Unsigned32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.8
ipsecCurCfgManualPolicyInEspEncKey
The Esp inbound cipher key for an IPsec policy.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.9
ipsecCurCfgManualPolicyInEspAuthKey
The Esp inbound authenticator key for an IPsec policy.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.10
ipsecCurCfgManualPolicyInEspSpi
The Esp inbound SPI for an IPsec policy.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.11
ipsecCurCfgManualPolicyOutEspEncKey
The Esp outbound cipher key for an IPsec policy.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.12
ipsecCurCfgManualPolicyOutEspAuthKey
The Esp outbound authenticator key for an IPsec policy.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.13
ipsecCurCfgManualPolicyOutEspSpi
The Esp outbound SPI for an IPsec policy.
Unsigned32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.14
ipsecCurCfgManualPolicyDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.9.1.15

ipsecNewCfgManualPolicyTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgManualPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecNewCfgManualPolicyTable' 
The (conceptual) table listing all of the IPsec manual policies.
ipsecNewCfgManualPolicyEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1
An entry (conceptual row) representing a IPsec manual policy.
Indexes
No indexes recorded
Column Syntax OID
ipsecNewCfgManualPolicyIndex
The index of ipsecNewCfgManualPolicyTable.
Unsigned32
Constraints:
range: 0-4
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.1
ipsecNewCfgManualPolicyPeer
The remote peer ip address.
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.2
ipsecNewCfgManualPolicySelector
The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.3
ipsecNewCfgManualPolicyTxform
The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable
Unsigned32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.4
ipsecNewCfgManualPolicyInAhKey
The AH inbound session key for an IPsec policy.
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.5
ipsecNewCfgManualPolicyInAhSpi
The AH inbound SPI for an IPsec policy.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.6
ipsecNewCfgManualPolicyOutAhKey
The AH outbound session key for an IPsec policy.
OctetStringr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.7
ipsecNewCfgManualPolicyOutAhSpi
The AH outbound SPI for an IPsec policy.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.8
ipsecNewCfgManualPolicyInEspEncKey
The Esp inbound cipher key for an IPsec policy.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.9
ipsecNewCfgManualPolicyInEspAuthKey
The Esp inbound authenticator key for an IPsec policy.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.10
ipsecNewCfgManualPolicyInEspSpi
The Esp inbound SPI for an IPsec policy.
Unsigned32r/w
Enumerated Values:
1trusted
2untrusted
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.11
ipsecNewCfgManualPolicyOutEspEncKey
The Esp outbound cipher key for an IPsec policy.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.12
ipsecNewCfgManualPolicyOutEspAuthKey
The Esp outbound authenticator key for an IPsec policy.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.13
ipsecNewCfgManualPolicyOutEspSpi
The Esp outbound SPI for an IPsec policy.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.14
ipsecNewCfgManualPolicyDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.10.1.15

ipsecCurCfgIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecCurCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecCurCfgIfTable' 
The table of interface IPsec policy configuration.
ipsecCurCfgIfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11.1
The table of interface IPsec policy configuration.
Indexes
No indexes recorded
Column Syntax OID
ipsecCurCfgIfIndex
The identifier of a particular interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11.1.1
ipsecCurCfgIfDynamicPolicyBmap
The IPsec dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCT…
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11.1.2
ipsecCurCfgIfManualPolicyBmap
The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 .…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11.1.5
ipsecCurCfgIfDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.11.1.8

ipsecNewCfgIfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecNewCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecNewCfgIfTable' 
The table of interface IPsec policy configuration.
ipsecNewCfgIfEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1
The table of interface IPsec policy configuration.
Indexes
No indexes recorded
Column Syntax OID
ipsecNewCfgIfIndex
The identifier of a particular interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.1
ipsecNewCfgIfDynamicPolicyBmap
The dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 …
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.2
ipsecNewCfgIfAddDynamicPolicy
Set the value to a IPsec dynamic policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.3
ipsecNewCfgIfDelDynamicPolicy
Set the value to a IPsec dynamic policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.4
ipsecNewCfgIfManualPolicyBmap
The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.

in receiving order:

OCTET 1 OCTET 2 .…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.5
ipsecNewCfgIfAddManualPolicy
Set the value to a IPsec manual policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.6
ipsecNewCfgIfDelManualPolicy
Set the value to a IPsec manual policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.7
ipsecNewCfgIfDelete
Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.32.2.12.1.8

dhcpSnoopingCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.33.5 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dhcpSnoopingCurCfgPortTable' 
DHCP Snooping Port Configuration Table.
dhcpSnoopingCurCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.33.5.1
A row in DHCP Snooping Port Configuration Table
Indexes
No indexes recorded
Column Syntax OID
dhcpSnoopingCurCfgPortId
Port ID of this DHCP Snooping port configration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.33.5.1.1
dhcpSnoopingCurCfgPortTrusted
Set port as trusted or untrusted port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.33.5.1.2
dhcpSnoopingCurCfgPortRateLimit
Set port DHCP packet rate limit(pps).
Its ranges is 0 ~ 2048, set 0 to disable rate limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.33.5.1.3
dhcpSnoopingCurCfgPortAlias
Alias port DHCP.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.33.5.1.4

dhcpSnoopingNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.33.6 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dhcpSnoopingNewCfgPortTable' 
DHCP Snooping Port Configuration Table.
dhcpSnoopingNewCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.33.6.1
A row in the DHCP Snooping Port Configuration Table
Indexes
No indexes recorded
Column Syntax OID
dhcpSnoopingNewCfgportId
Port ID of this DHCP Snooping port configration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.33.6.1.1
dhcpSnoopingNewCfgportTrusted
Set port as trusted or untrusted port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.33.6.1.2
dhcpSnoopingNewCfgportRateLimit
Set port DHCP packet rate limit(pps). Set 0 to disable rate limit.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.1.33.6.1.3
dhcpSnoopingNewCfgPortAlias
Alias port DHCP.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.1.33.6.1.4

dhcpSnoopingCurCfgVlanTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.33.7 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingCurCfgVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dhcpSnoopingCurCfgVlanTable' 
DHCP Snooping VLAN Table.
dhcpSnoopingCurCfgVlanTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.33.7.1
A row in the DHCP Snooping VLAN Table
Indexes
No indexes recorded
Column Syntax OID
dhcpSnoopingCurCfgVlanId
VLAN ID of this DHCP Snooping VLAN configration.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.33.7.1.1
dhcpSnoopingCurCfgVlanOnState
on/off state of DHCP Snooping on this VLAN.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.1.33.7.1.2

dhcpSnoopingNewCfgVlanTable

table
.1.3.6.1.4.1.26543.2.7.4.3.1.33.8 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingNewCfgVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dhcpSnoopingNewCfgVlanTable' 
DHCP Snooping VLAN Table.
dhcpSnoopingNewCfgVlanTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.1.33.8.1
A row in the DHCP Snooping VLAN Table
Indexes
No indexes recorded
Column Syntax OID
dhcpSnoopingNewCfgVlanId
VLAN ID of this DHCP Snooping VLAN configration.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.1.33.8.1.1
dhcpSnoopingNewCfgVlanOnState
Enable/Disable DHCP Snooping on this VLAN.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.1.33.8.1.2

ospfAreaRxTxStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfAreaRxTxStats' 
The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1
Rx Tx packet Statistics about a OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfAreaRxTxIndex
The index of the ospf Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.1
ospfAreaRxPkts
The total number of OSPF packets received in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.2
ospfAreaTxPkts
The total number of OSPF packets transmitted in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.3
ospfAreaRxHello
The total number of Hello packets received in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.4
ospfAreaTxHello
The total number of Hello packets transmitted in this OSPF
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.5
ospfAreaRxDatabase
The total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.6
ospfAreaTxDatabase
The total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.7
ospfAreaRxlsReqs
The total number of Link State Request packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.8
ospfAreaTxlsReqs
The total number of Link State Request packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.9
ospfAreaRxlsAcks
The total number of Link State Acknowledgement packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.10
ospfAreaTxlsAcks
The total number of Link State Acknowledgement packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.11
ospfAreaRxlsUpdates
The total number of Link State Update packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.12
ospfAreaTxlsUpdates
The total number of Link State Update packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.1.1.13

ospfAreaNbrChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfAreaNbrChangeStats' 
The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1
Area Neighbour Change Statistics about a OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfAreaNbrIndex
The index of the ospf Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.1
ospfAreaNbrhello
The total number of Hello packets received from neighbours
in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.2
ospfAreaNbrStart
The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.3
ospfAreaNbrAdjointOk
The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.4
ospfAreaNbrNegotiationDone
The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.5
ospfAreaNbrExchangeDone
The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.6
ospfAreaNbrBadRequests
The sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.7
ospfAreaNbrBadSequence
The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.8
ospfAreaNbrLoadingDone
The total number of link state updates received for all
out-of-date portions of the database in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.9
ospfAreaNbrN1way
The total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.10
ospfAreaNbrRstAd
The total number of times the Neighbour adjacency has been reset
across this OPSF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.11
ospfAreaNbrDown
The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.12
ospfAreaNbrN2way
The total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.2.1.13

ospfAreaChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfAreaChangeStats' 
The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1
Area Change Statistics about a OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfAreaIntfIndex
The index of the OSPF Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.1
ospfAreaIntfHello
The total number of Hello packets sent on this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.2
ospfAreaIntfDown
The total number of interfaces down in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.3
ospfAreaIntfLoop
The total number of interfaces no longer connected to
the attatched network in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.4
ospfAreaIntfUnloop
The total number of interfaces connected to the attatched
network in this OSPF area..
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.5
ospfAreaIntfWaitTimer
The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.6
ospfAreaIntfBackup
The total number of Backup Designated Routers on the attatched
network for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.7
ospfAreaIntfNbrChange
The total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.3.1.8

ospfAreaErrorStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfAreaErrorStats' 
The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1
Error Statistics for an OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfAreaErrIndex
The index of the OSPF Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.1
ospfAreaErrAuthFailure
The total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.2
ospfAreaErrNetmaskMismatch
The total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.3
ospfAreaErrHelloMismatch
The total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.4
ospfAreaErrDeadMismatch
The total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.5
ospfAreaErrOptionsMismatch
The total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.6
ospfAreaErrUnknownNbr
The total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.7
ospfAreaErrAreaMismatch
The total number of packets received with a wrong area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.8
ospfAreaErrInvalidSelfOrigLsa
The total number of packets received with invalid self
originated LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.2.4.1.9

ospfIntfRxTxStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIntfRxTxStats' 
The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1
OSPF interface Rx/Tx packet statistics.
Indexes
No indexes recorded
Column Syntax OID
ospfIntfRxTxIndex
The OSPF interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.1
ospfIntfRxPkts
The total number of OSPF packets received for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.2
ospfIntfTxPkts
The total number of OSPF packets transmitted for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.3
ospfIntfRxHello
The total number of Hello packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.4
ospfIntfTxHello
The total number of Hello packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.5
ospfIntfRxDatabase
The total number of Database Description packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.6
ospfIntfTxDatabase
The total number of Database Description packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.7
ospfIntfRxlsReqs
The total number of Link State Request packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.8
ospfIntfTxlsReqs
The total number of Link State Request packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.9
ospfIntfRxlsAcks
The total number of Link State Acknowledgement packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.10
ospfIntfTxlsAcks
The total number of Link State Acknowledgement packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.11
ospfIntfRxlsUpdates
The total number of Link State Update packets received for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.12
ospfIntfTxlsUpdates
The total number of Link State Update packets transmitted for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.1.1.13

ospfIntfNbrChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIntfNbrChangeStats' 
The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1
OSPF interface Neighbour Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospfIntfNbrIndex
The index of the OSPF Interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.1
ospfIntfNbrhello
The total number of Hello packets received from neighbours
in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.2
ospfIntfNbrStart
The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.3
ospfIntfNbrAdjointOk
The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.4
ospfIntfNbrNegotiationDone
The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.5
ospfIntfNbrExchangeDone
The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.6
ospfIntfNbrBadRequests
The total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.7
ospfIntfNbrBadSequence
The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.8
ospfIntfNbrLoadingDone
The total number of link state updates received for all
out-of-date portions of the database for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.9
ospfIntfNbrN1way
The total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.10
ospfIntfNbrRstAd
The sum total number of times the Neighbour adjacency has been reset
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.11
ospfIntfNbrDown
The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.12
ospfIntfNbrN2way
The total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.2.1.13

ospfIntfChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIntfChangeStats' 
The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1
OSPF interface Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospfIntfIndex
The index of the OSPF Interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.1
ospfIntfHello
The total number of Hello packets sent by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.2
ospfIntfDown
The total number of times the interface was down.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.3
ospfIntfLoop
The total number of times the interface was no longer connected to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.4
ospfIntfUnloop
The total number of times the interface, connected back to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.5
ospfIntfWaitTimer
The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.6
ospfIntfBackup
The total number of Backup Designated Routers on the attatched
network for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.7
ospfIntfNbrChange
The total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.3.1.8

ospfIntfErrorStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIntfErrorStats' 
The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1
Error Statistics for an OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfIntfErrIndex
The index of the OSPF Intf for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.1
ospfIntfErrAuthFailure
The total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.2
ospfIntfErrNetmaskMismatch
The total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.3
ospfIntfErrHelloMismatch
The total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.4
ospfIntfErrDeadMismatch
The total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Enumerated Values:
1clear
2ok
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.5
ospfIntfErrOptionsMismatch
The total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.6
ospfIntfErrUnknownNbr
The total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.7
ospfIntfErrAreaMismatch
The total number of packets received with a wrong area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.8
ospfIntfErrInvalidSelfOrigLSA
The total number of packets received with invalid self-orig LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.6.3.4.1.9

igmpSnoopStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.9.1 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpSnoopStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpSnoopStats' 
Statistics for IGMP Snooping.
igmpSnoopStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1
Statistics for IGMP Snooping.
Indexes
No indexes recorded
Column Syntax OID
igmpSnoopVlanIndex
The index of the VLAN for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.1
rxIgmpValidPkts
The total number of valid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.2
rxIgmpInvalidPkts
The total number of invalid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.3
rxIgmpGenQueries
The total number of IGMP General Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.4
rxIgmpGrpSpecificQueries
The total number of IGMP Group Specific Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.5
rxIgmpLeaves
The total number of IGMP Leave packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.6
rxIgmpReports
The total number of IGMP Report packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.7
txIgmpGrpSpecificQueries
The total number of IGMP Group Specific Query packets
transmitted on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.8
txIgmpReports
The total number of IGMP Report packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.9
txIgmpLeaves
The total number of IGMP Leave packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.10
rxIgmpGroupSourceSpecificQueries
The total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.11
rxIgmpV3CurrentStateRecords
The total number of IGMP Current State Records (CSRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.12
rxIgmpV3SourceListChangeRecords
The total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.13
rxIgmpV3FilterChangeRecords
The total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.14
txIgmpGenQueries
The total number of IGMP General Query packets send
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.16
rxIgmpDiscardPkts
The total number of IGMP packets discarded
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.17
rxIgmpPimHellos
The total number of Pim Hello packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.18
igmpClearVlanStats
Setting this to clear(1) results in clearing the statistics for this
snooping VLAN.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.2.9.1.1.19

bootpRelayStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.3.2.20.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bootpRelayStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bootpRelayStatsTable' 
The BOOTP relay agent statistics.
bootpRelayStatsTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1
A row in the BOOTP relay agent statistics table.
Indexes
No indexes recorded
Column Syntax OID
bootpRelayStatsIndex
The port number of the port associated with this BOOTP relay
statistics entry.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.1
bootpRelayStatsRequestsReceived
The total number of BOOTP request packets received on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.2
bootpRelayStatsRequestsRelayed
The number of request packets relayed to the BOOTP server. If
there is more than one server, a request is relayed once for
each server; hence, with two servers, this counter will be twice
as many as the value of the boo…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.3
bootpRelayStatsRequestsDroppedNoRelay
This counter increases each time a request could not be relayed
because BOOTP relay is disabled or not allowed on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.5
bootpRelayStatsRequestsDroppedNoServer
This counter increases each time a request is dropped because
there is no configured server or the server is unreachable
because there is no active IP interface that can be used for
relaying the request to the server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.6
bootpRelayStatsRequestsDroppedError
This counter increases each time a request is dropped due to
various errors encountered while processing the request packet.
Such errors include short packet length, invalid 'hops' value,
and memory allocation errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.7
bootpRelayStatsRepliesReceived
This is the total number of BOOTP response packets received on
the port associated with this object.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.8
bootpRelayStatsRepliesRelayed
This is the total number of response packets that were relayed
to the client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.9
bootpRelayStatsRepliesDroppedError
This counter increases each time a response packet is dropped
due to various errors encountered while processing the packet.
Errors include unknown relay agent addresses ('giaddr'), and
memory allocation errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.20.1.1.10

ospf3AreaRxTxDisdStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1 · 1 row entry · 19 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaRxTxDisdStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3AreaRxTxDisdStats' 
The table of Ospf3 Area Rx/Tx Statistics.
ospf3AreaRxTxDisdStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1
Rx Tx packet Statistics about a Ospf3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3AreaRxTxDisdIndex
The index of the ospf3 Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.1
ospf3AreaRxPkts
The total number of Ospf3 packets received in this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.2
ospf3AreaTxPkts
The total number of Ospf3 packets transmitted in this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.3
ospf3AreaDisdPkts
The total number of Ospf3 packets discaded in this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.4
ospf3AreaRxHello
The total number of Hello packets received in this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.5
ospf3AreaTxHello
The total number of Hello packets transmitted in this Ospf3
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.6
ospf3AreaDisdHello
The total number of Hello packets discaded in this Ospf3
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.7
ospf3AreaRxDatabase
The total number of Database Description packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.8
ospf3AreaTxDatabase
The total number of Database Description packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.9
ospf3AreaDisdDatabase
The total number of Database Description packets discarded
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.10
ospf3AreaRxlsReqs
The total number of Link State Request packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.11
ospf3AreaTxlsReqs
The total number of Link State Request packets transmitted for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.12
ospf3AreaDisdlsReqs
The total number of Link State Request packets discarded for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.13
ospf3AreaRxlsAcks
The total number of Link State Acknowledgement packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.14
ospf3AreaTxlsAcks
The total number of Link State Acknowledgement packets transmitted
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.15
ospf3AreaDisdlsAcks
The total number of Link State Acknowledgement packets discarded
for this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.16
ospf3AreaRxlsUpdates
The total number of Link State Update packets received for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.17
ospf3AreaTxlsUpdates
The total number of Link State Update packets transmitted for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.18
ospf3AreaDisdlsUpdates
The total number of Link State Update packets discarded for
this Ospf3 area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.1.1.19

ospf3AreaNbrChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3AreaNbrChangeStats' 
The table of Ospf3 Neighbor change Statistics.
ospf3AreaNbrChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1
Ospf3 Neighbor Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospf3AreaNbrIndex
The index of the Ospf3 Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.1
ospf3AreaNbrDown
The total number of times neighbors now existing on this area
have changed into DOWN state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.2
ospf3AreaNbrAttempt
The total number of times neighbors now existing on this area
have changed into ATTEMPT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.3
ospf3AreaNbrInit
The total number of times neighbors now existing on this area
have changed into INIT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.4
ospf3AreaNbrN2way
The total number of times neighbors now existing on this area
have changed into 2WAY state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.5
ospf3AreaNbrExStart
The total number of times neighbors now existing on this area
have changed into EXSTART state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.6
ospf3AreaNbrExchange
The total number of times neighbors now existing on this area
have changed into EXCHANGE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.7
ospf3AreaNbrLoading
The total number of times neighbors now existing on this area
have changed into LOADING state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.8
ospf3AreaNbrFull
The total number of times neighbors now existing on this area
have changed into FULL state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.9
ospf3AreaNbrAllEvents
The total number of times neighbors now existing on this area
have changed state or an error had occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.2.1.10

ospf3AreaIntfChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaIntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3AreaIntfChangeStats' 
The table of Ospf3 Interface change Statistics.
ospf3AreaIntfChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1
Ospf3 interface Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospf3AreaIntfIndex
The index of the Ospf3 Interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.1
ospf3AreaIntfDown
The total number of changes into the DOWN State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.2
ospf3AreaIntfLoop
The total number of changes into the LOOP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.3
ospf3AreaIntfWaiting
The total number of changes into the WAITING State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.4
ospf3AreaIntfPtop
The total number of changes into the PTOP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.5
ospf3AreaIntfDr
The total number of changes into the DR State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.6
ospf3AreaIntfBackup
The total number of changes into the BACKUP State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.7
ospf3AreaIntfDrOther
The total number of changes into the DROTHER State of the interfaces
associated with this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.8
ospf3AreaIntfAllEvents
The total number of State changes of the interfaces
associated with this OSPF area
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.3.1.9

ospf3AreaErrorStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4 · 1 row entry · 17 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3AreaErrorStats' 
The table of Ospf3 Interface Error Statistics.
ospf3AreaErrorStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1
Error Statistics for an Ospf3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3AreaErrIndex
The index of the Ospf3 Area for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.1
ospf3AreaErrRxOnPasv
The total number of packets received by all of the interfaces in this area that are
received on a passive interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.2
ospf3AreaErrRxOspfOff
The total number of packets received by all of the interfaces in this area that are
received while OSPF was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.3
ospf3AreaErrRxOnNotup
The total number of packets received by all of the interfaces in this area that are
received while the interface was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.4
ospf3AreaErrRxVerMismatch
The total number of packets received by all of the interfaces in this area that have
an OSPF version number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.5
ospf3AreaErrRxZeroRTRID
The total number of packets received by all of the interfaces in this area that have
a RouterID of 0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.6
ospf3AreaErrRxSameRTRID
The total number of packets received by all of the interfaces in this area that have
the same RouterID as this Router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.7
ospf3AreaErrRxMismatchInstID
The total number of packets received by all of the interfaces in this area that have
an instance number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.8
ospf3AreaErrBadAreaID
The total number of packets received by all of the interfaces in this area that have
an area number not equal to the one of the area of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.9
ospf3AreaErrBadDestAddr
The total number of packets discarded by all of the interfaces in this area because of
a destination address mismatch.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.10
ospf3AreaErrBadChecksum
The total number of packets discarded by all of the interfaces in this area because of
a bad checksum.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.11
ospf3AreaErrBadNeighbour
The total number of packets discarded by all of the interfaces in this area because
they could not be associated with any neighbor.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.12
ospf3AreaErrBadPktType
The total number of packets discarded by all of the interfaces in this area because
the packet type was not recognized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.13
ospf3AreaErrHelloMismatch
The total number of packets received with a different hello interval
by all of the interfaces in this area .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.14
ospf3AreaErrOptionsMismatch
The total number of packets received with a different options
by all of the interfaces in this area .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.15
ospf3AreaErrDeadMismatch
The total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.16
ospf3AreaErrHelloNoNbr
The total number of packets received from an unknown neighbor
when all of the interfaces in this area has a Network Type of NBMA or PTOMP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.2.4.1.17

ospf3IntfRxTxDisdStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1 · 1 row entry · 19 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfRxTxDisdStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IntfRxTxDisdStats' 
The table of Ospf3 Intf Rx/Tx Statistics.
ospf3IntfRxTxDisdStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1
Rx Tx packet Statistics about a Ospf3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3IntfRxTxDisdIndex
The index of the ospf3 Intf for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.1
ospf3IntfRxPkts
The total number of Ospf3 packets received on this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.2
ospf3IntfTxPkts
The total number of Ospf3 packets transmitted on this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.3
ospf3IntfDisdPkts
The total number of Ospf3 packets discaded on this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.4
ospf3IntfRxHello
The total number of Hello packets received on this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.5
ospf3IntfTxHello
The total number of Hello packets transmitted on this Ospf3
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.6
ospf3IntfDisdHello
The total number of Hello packets discaded in this Ospf3
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.7
ospf3IntfRxDatabase
The total number of Database Description packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.8
ospf3IntfTxDatabase
The total number of Database Description packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.9
ospf3IntfDisdDatabase
The total number of Database Description packets discarded
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.10
ospf3IntfRxlsReqs
The total number of Link State Request packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.11
ospf3IntfTxlsReqs
The total number of Link State Request packets transmitted for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.12
ospf3IntfDisdlsReqs
The total number of Link State Request packets discarded for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.13
ospf3IntfRxlsAcks
The total number of Link State Acknowledgement packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.14
ospf3IntfTxlsAcks
The total number of Link State Acknowledgement packets transmitted
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.15
ospf3IntfDisdlsAcks
The total number of Link State Acknowledgement packets discarded
for this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.16
ospf3IntfRxlsUpdates
The total number of Link State Update packets received for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.17
ospf3IntfTxlsUpdates
The total number of Link State Update packets transmitted for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.18
ospf3IntfDisdlsUpdates
The total number of Link State Update packets discarded for
this Ospf3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.1.1.19

ospf3IntfNbrChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IntfNbrChangeStats' 
The table of Ospf3 Interface Neighbour change Statistics.
ospf3IntfNbrChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1
Ospf3 interface Neighbour Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospf3IntfNbrIndex
The index of the Ospf3 Interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.1
ospf3IntfNbrDown
The total number of times neighbors now existing on this interface
have changed into DOWN state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.2
ospf3IntfNbrAttempt
The total number of times neighbors now existing on this interface
have changed into ATTEMPT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.3
ospf3IntfNbrInit
The total number of times neighbors now existing on this interface
have changed into INIT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.4
ospf3IntfNbrN2way
The total number of times neighbors now existing on this interface
have changed into 2WAY state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.5
ospf3IntfNbrExStart
The total number of times neighbors now existing on this interface
have changed into EXSTART state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.6
ospf3IntfNbrExchange
The total number of times neighbors now existing on this interface
have changed into EXCHANGE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.7
ospf3IntfNbrLoading
The total number of times neighbors now existing on this interface
have changed into LOADING state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.8
ospf3IntfNbrFull
The total number of times neighbors now existing on this interface
have changed into FULL state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.9
ospf3IntfNbrAllEvents
The total number of times neighbors now existing on this interface
have changed state or an error had occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.2.1.10

ospf3IntfChangeStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IntfChangeStats' 
The table of Ospf3 Interface change Statistics.
ospf3IntfChangeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1
Ospf3 interface Change statistics.
Indexes
No indexes recorded
Column Syntax OID
ospf3IntfIndex
The index of the Ospf3 Interface for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.1
ospf3IntfDown
The total number of times the interface was down.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.2
ospf3IntfLoop
The total number of times this interface changed State into the LOOP State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.3
ospf3IntfWaiting
The total number of times this interface changed State into the Waiting State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.4
ospf3IntfPtop
The total number of times this interface changed State into the PTOP State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.5
ospf3IntfDr
The total number of times this interface changed State into the DR State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.6
ospf3IntfBackup
The total number of times this interface changed State into the Backup State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.7
ospf3IntfDrOther
The total number of times this interface changed State into the DrOther State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.8
ospf3IntfAllEvents
The total number of times this interface changed State.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.3.1.9

ospf3IntfErrorStats

table
.1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IntfErrorStats' 
The table of Ospf3 Interface Error Statistics.
ospf3IntfErrorStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1
Error Statistics for an Ospf3 interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3IntfErrIndex
The index of the Ospf3 Intf for which these statistics apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.1
ospf3IntfErrRxOnPasv
The total number of packets received by this interface that are
received on a passive interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.2
ospf3IntfErrRxOspfOff
The total number of packets received by this interface that are
received while OSPF was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.3
ospf3IntfErrRxOnNotup
The total number of packets received by this interface that are
received while the interface was disabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.4
ospf3IntfErrRxVerMismatch
The total number of packets received by this interface that have
an OSPF version number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.5
ospf3IntfErrRxZeroRTRID
The total number of packets received by this interface that have
a RouterID of 0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.6
ospf3IntfErrRxSameRTRID
The total number of packets received by this interface that have
the same RouterID as this Router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.7
ospf3IntfErrRxMismatchInstID
The total number of packets received by this interface that have
an instance number not equal to the one of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.8
ospf3IntfErrBadAreaID
The total number of packets received by this interface that have
an area number not equal to the one of the area of the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.9
ospf3IntfErrBadDestAddr
The total number of packets discarded by this interface because of
a destination address mismatch.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.10
ospf3IntfErrBadChecksum
The total number of packets discarded by this interface because of
a bad checksum.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.11
ospf3IntfErrBadNeighbour
The total number of packets discarded by this interface because
they could not be associated with any neighbor.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.12
ospf3IntfErrBadPktType
The total number of packets discarded by this interface because
the packet type was not recognized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.13
ospf3IntfErrHelloMismatch
The total number of packets received with a different hello interval
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.14
ospf3IntfErrOptionsMismatch
The total number of packets received with a different options
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.15
ospf3IntfErrDeadMismatch
The total number of packets received with a different dead interval
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.16
ospf3IntfErrMTUMismatch
The total number of packets received with a different MTU size
by this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.17
ospf3IntfErrHelloNoNbr
The total number of packets received from an unknown neighbor
when this interface has a Network Type of NBMA or PTOMP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.22.3.4.1.18

mldIfStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.3.2.23.1 · 1 row entry · 37 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldIfStatsTable' 
The table listing the interfaces on which
MLD is enabled.
mldIfStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1
An entry representing an interface stats on
which MLD is enabled.
Indexes
No indexes recorded
Column Syntax OID
mldIfStatsIfIndex
The internetwork-layer interface value of the interface
for which MLD msg stats is counted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.1
rxMldIfStatsGeneralQuery
The total number of MLD Listener Queries received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.2
rxMldIfStatsMASQuery
The total number of MLD Listener MAS Queries received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.3
rxMldIfStatsMASSQQuery
The total number of MLD Listener MASSQ Queries received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.4
rxMldIfStatsMLDv1Report
The total number of MLD Listener Reports (v1) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.5
rxMldIfStatsMLDv1Done
The total number of MLD Listener Dones (v1/v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.6
rxMldIfStatsMLDv2Report
The total number of MLD Listener Reports (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.7
rxMldIfStatsIncCrsv2
The total number of MLD INC CRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.8
rxMldIfStatsExcCrsv2
The total number of MLD EXC CRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.9
rxMldIfStatsToIncFmcrsv2
The total number of MLD TO_INC FMCRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.10
rxMldIfStatsToExcFmcrsv2
The total number of MLD TO_EXC FMCRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.11
rxMldIfStatsAllowSlcrsv2
The total number of MLD ALLOW SLCRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.12
rxMldIfStatsBlockSlcrsv2
The total number of MLD BLOCK SLCRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.13
txMldIfStatsGeneralQuery
The total number of MLD Listener Queries sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.14
txMldIfStatsMASQuery
The total number of MLD Listener MAS Queries sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.15
txMldIfStatsMASSQQuery
The total number of MLD Listener MASSQ Queries sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.16
txMldIfStatsMLDv1Report
The total number of MLD Listener Reports (v1) sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.17
txMldIfStatsMLDv1Done
The total number of MLD Listener Dones (v1/v2) sent.
SNMPv2-SMICounter32
Enumerated Values:
0any
1ah
2esp
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.18
txMldIfStatsMLDv2Report
The total number of MLD Listener Reports (v2) sent.
SNMPv2-SMICounter32
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.19
txMldIfStatsIncCrsv2
The total number of MLD INC CRs (v2) sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.20
txMldIfStatsExcCrsv2
The total number of MLD EXC CRs (v2) sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.21
txMldIfStatsToIncFmcrsv2
The total number of MLD TO_INC FMCRs (v2) sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.22
txMldIfStatsToExcFmcrsv2
The total number of MLD TO_EXC FMCRs (v2) sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.23
txMldIfStatsAllowSlcrsv2
The total number of MLD ALLOW SLCRs (v2) sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.24
txMldIfStatsBlockSlcrsv2
The total number of MLD BLOCK SLCRs (v2) received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.25
errMldIfStatsGeneralQuery
The total number of MLD Listener Queries errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.27
errMldIfStatsMASQuery
The total number of MLD Listener MAS Queries errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.28
errMldIfStatsMASSQQuery
The total number of MLD Listener MASSQ Queries errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.29
errMldIfStatsMLDv1Report
The total number of MLD Listener Report (v1) errors.
SNMPv2-SMICounter32
Enumerated Values:
1fixed
2static
3addr
4rip
5broadcast
6martian
7multicast
8vip
9bgp
10ospf
11none
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.30
errMldIfStatsMLDv1Done
The total number of MLD Listener Done (v1/v2) errors.
SNMPv2-SMICounter32
Enumerated Values:
1indirect
2direct
3local
4broadcast
5martian
6multicast
7other
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.31
errMldIfStatsMLDv2Report
The total number of MLD Listener Report (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.32
errMldIfStatsIncCrsv2
The total number of MLD INC CRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.33
errMldIfStatsExcCrsv2
The total number of MLD EXC CRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.34
errMldIfStatsToIncFmcrsv2
The total number of MLD TO_INC FMCRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.35
errMldIfStatsToExcFmcrsv2
The total number of MLD TO_EXC FMCRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.36
errMldIfStatsAllowSlcrsv2
The total number of MLD ALLOW SLCRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.37
errMldIfStatsBlockSlcrsv2
The total number of MLD BLOCK SLCRs (v2) errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.23.1.1.38

ipsecSaStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.3.2.24.1 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSaStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecSaStatsTable' 
The (conceptual) table listing all of the IPsec SA statistics.
ipsecSaStatsEntry row .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1
An entry (conceptual row) representing a IPsec SA statistics.
Indexes
No indexes recorded
Column Syntax OID
ipsecSaStatsIndex
The index of ipsecSaStatsEntry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.1
ipsecSaStatsSpi
The SPI used by the SA.
SNMPv2-SMIUnsigned32
Enumerated Values:
1fixed
2static
3addr
4rip
5broadcast
6martian
7multicast
8vip
9bgp
10ospf
11none
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.2
ipsecSaStatsProto
The proto(AH,ESP,or Both) used by the SA.
Enumeration
Enumerated Values:
1indirect
2direct
3local
4broadcast
5martian
6multicast
7other
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.3
ipsecSaStatsDstAddr
The destination IP address for the SA.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.4
ipsecSaStatsUsageTime
The time (in seconds) since the SA was first used.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.5
ipsecSaStatsBytes
The count of bytes for the SA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.6
ipsecSaStatsPkts
The number of packets sent or received for the SA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.2.24.1.1.7

ipDataRouteInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipDataRouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipDataRouteInfoTable' 
The table of run-time IP routes.
ipDataRouteInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1
A row in the run-time IP route table
Indexes
Column Syntax OID
ipDataRouteInfoIndx
The index of this route table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.1
ipDataRouteInfoDestIp
The destination IP address of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.2
ipDataRouteInfoMask
The destination IP mask of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.3
ipDataRouteInfoGateway
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.4
ipDataRouteInfoTag
The tag-type for this route.
Enumeration
Enumerated Values:
1clear
2unresolved
3permanent
4indirect
5layer4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.5
ipDataRouteInfoType
The type of the route.
Enumeration
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.6
ipDataRouteInfoInterface
The interface number for which the destination address is applicable.
Loopback interfaces are numbered starting with maximum allowed
IP interfaces +1.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.7
ipDataRouteInfoGateway1
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.8
ipDataRouteInfoGateway2
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.9
ipDataRouteInfoMetric
The Metric for this route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.1.1.10

ipMgmtRouteInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.1.3 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipMgmtRouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipMgmtRouteInfoTable' 
The table of run-time IP routes.
ipMgmtRouteInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1
A row in the run-time IP route table
Indexes
No indexes recorded
Column Syntax OID
ipMgmtRouteInfoIndx
The index of this route table.
SNMPv2-SMIInteger32
Enumerated Values:
1clear
2unresolved
3permanent
4indirect
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.1
ipMgmtRouteInfoDestIp
The destination IP address of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.2
ipMgmtRouteInfoMask
The destination IP mask of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.3
ipMgmtRouteInfoGateway
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.4
ipMgmtRouteInfoTag
The tag-type for this route.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.5
ipMgmtRouteInfoType
The type of the route.
Enumeration
Enumerated Values:
1init
2master
3backup
4holdoff
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.6
ipMgmtRouteInfoInterface
The interface number for which the destination address is applicable.
SNMPv2-SMIInteger32
Enumerated Values:
1owner
2renter
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.7
ipMgmtRouteInfoGateway1
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.8
ipMgmtRouteInfoGateway2
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.9
ipMgmtRouteInfoMetric
The Metric for this route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.1.3.1.10

arpInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk arpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::arpInfoTable' 
The table of ARP entries.
arpInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1
A row in the ARP table
Indexes
No indexes recorded
Column Syntax OID
arpInfoDestIp
The destination IP address of the ARP entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.1
arpInfoMacAddr
The MAC address for the ARP entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.2
arpInfoVLAN
The VLAN identifier for the ARP entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.3
arpInfoSrcPortIndex
The port number on which this entry's equivalence is effective.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.4
arpInfoFlag
The flag associated with this ARP entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.6
arpInfoSrcPortAlias
Alias for port number.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.2.1.1.8

arpMgmtInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.2.3 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk arpMgmtInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::arpMgmtInfoTable' 
The table of Mgmt ARP entries.
arpMgmtInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1
A row in the ARP table
Indexes
No indexes recorded
Column Syntax OID
arpMgmtInfoDestIp
The destination IP address of the ARP entry.
SNMPv2-SMIIpAddress
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.1
arpMgmtInfoMacAddr
The MAC address for the ARP entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.2
arpMgmtInfoVLAN
The VLAN identifier for the ARP entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.3
arpMgmtInfoSrcPortIndex
The port number on which this entry's equivalence is effective.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.4
arpMgmtInfoFlag
The flag associated with this ARP entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.5
arpMgmtInfoSrcPortAlias
Alias for port number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.2.3.1.6

vrrpInfoVirtRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpInfoVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpInfoVirtRtrTable' 
The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1
The run-time information about a VRRP virtual router.
Indexes
No indexes recorded
Column Syntax OID
vrrpInfoVirtRtrIndex
The VRRP virtual router index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.1
vrrpInfoVirtRtrState
The VRRP virtual router state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.2
vrrpInfoVirtRtrOwnership
The VRRP virtual router ownership status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.3
vrrpInfoVirtRtrConfig
The status of the VRRP virtual router.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.4
vrrpInfoVirtRtrID
The VRRP virtual router identifier.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.5
vrrpInfoVirtRtrAddr
The VRRP virtual router IP address.
SNMPv2-SMIIpAddress
Enumerated Values:
0down
1up
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.6
vrrpInfoVirtRtrIfIndex
The IfIndex that the VRRP virtual router is representing.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.7
vrrpInfoVirtRtrPriority
The priority value to be used by the specified VRRP virtual routers.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.3.1.1.8

ospfAreaInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.2 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfAreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfAreaInfoTable' 
The table of OSPF Area information.
ospfAreaInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1
Information about a OSPF area.
Indexes
No indexes recorded
Column Syntax OID
ospfAreaInfoIndex
The OSPF area number for which the OSPF info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.1
ospfAreaInfoId
The IP address of the OSPF area.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.2
ospfTotalNumberOfInterfaces
The total number of interfaces for this OSPF area.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.3
ospfNumberOfInterfacesUp
The number of interfaces UP in area.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.4
ospfNumberOfLsdbEntries
The number of Link State Database entries for this OSPF area.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.5
ospfAreaInfoAuthType
Area authentication.
Enumeration
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.6
ospfAreaInfoLsTypesAccepted
LS types accepted by this area.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.7
ospfAreaInfoSPF
Number of times SPF algorithm has been executed.
SNMPv2-SMIInteger32
Enumerated Values:
0seconds
1milliseconds
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.8
ospfAreaInfoAreaBorderRouter
Count of ABR local to this area.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.9
ospfAreaInfoASBoundaryRouter
Count of ASBR local to this area.
SNMPv2-SMIInteger32
Enumerated Values:
0seconds
1milliseconds
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.10
ospfAreaInfoTotalNeighbours
The total number of OSPF neighbors.
SNMPv2-SMIInteger32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.11
ospfAreaInfoNeighborsINITstate
Total neighbors in INIT state.
SNMPv2-SMIInteger32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.12
ospfAreaInfoNeighborsEXCHstate
Total neighbors in EXCH state.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.13
ospfAreaInfoNeighborsFULLstate
Total neighbors in FULL state.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.2.1.14

ospfIntfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.3 · 1 row entry · 24 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIntfInfoTable' 
The table of OSPF Interface information.
ospfIntfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1
Information about a OSPF interface.
Indexes
No indexes recorded
Column Syntax OID
ospfIfInfoIndex
The OSPF interface number for which the OSPF info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.1
ospfIfInfoIpAddress
The IP address of the OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.2
ospfIfInfoArea
The index of the area that the interface belongs.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.3
ospfIfInfoAdminStatus
Admin Status of the interface:
down(0), up(1).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.4
ospfIfInfoPassive
Passive status of the interface:
disabled(0), enabled(1).
Enumeration
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.5
ospfIfInfoRouterIP
The router ID of the switch.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.6
ospfIfInfoState
The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.7
ospfIfInfoPriority
Interface router priority
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.8
ospfIfInfoDesignatedRouterIP
The OSPF Designated Router IP (IP Address) for this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.9
ospfIfInfoDesignatedRouterIpAddress
The OSPF Designated Router IP Address for this OSPF interface.
SNMPv2-SMIIpAddress
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.10
ospfIfInfoBackupDesignatedRouterIP
The OSPF Backup Designated Router IP for this OSPF
interface.
SNMPv2-SMIIpAddress
Enumerated Values:
0seconds
1milliseconds
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.11
ospfIfInfoBackupDesignatedRouterIpAddress
The OSPF Backup Designated Router Ip Address for this OSPF
interface.
SNMPv2-SMIIpAddress
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.12
ospfIfInfoHello
The hello timer for this OSPF interface.
Integer32
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.13
ospfIfInfoHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.14
ospfIfInfoDead
The dead timer for this OSPF interface.
Integer32
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.15
ospfIfInfoDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.16
ospfIfInfoWaitInterval
The OSPF Wait interval for this OSPF interface.
SNMPv2-SMIInteger32
Constraints:
range: 0-8
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.17
ospfIfInfoWaitIntervalMS
Units of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.18
ospfIfInfoRetransmit
The retransmit interval for this OSPF interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.19
ospfIfInfoTransitDelay
The transit delay for this OSPF interface.
Integer32
Enumerated Values:
0down
1attempt
2init
3twoway
4exstart
5exchange
6loading
7full
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.20
ospfIfInfoTotalNeighbours
The Total number of neighbours for this OSPF interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.21
ospfIfInfoEvents
The total number of events for this OSPF interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.22
ospfIfInfoAuthType
Type of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.23
ospfIfInfoPtop
Point-to-point status of the interface:
disabled(0), enabled(1).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.3.1.24

ospfVirtIntfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.4 · 1 row entry · 19 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfVirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfVirtIntfInfoTable' 
The table of OSPF virtual interfaces information.
ospfVirtIntfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1
Information about an OSPF virtual interface.
Indexes
No indexes recorded
Column Syntax OID
ospfVirtIntfInfoIndex
The OSPF Virtual Interface number for which this table is
related.
SNMPv2-SMIInteger32
Enumerated Values:
1down
2attempt
3init
4twoway
5exStart
6exchange
7loading
8full
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.1
ospfVirtIntfInfoIpAddr
The IP Address of this virtual interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.2
ospfVirtIntfInfoArea
The index of the OSPF area to which this virtual interface
belongs.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.3
ospfVirtIntfInfoRouterId
The Router ID.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.4
ospfVirtIntfInfoState
State
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.5
ospfVirtIntfInfoCost
The cost of the virtual interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.6
ospfVirtIntfInfoTrans
The transit delay for the virtual interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.7
ospfVirtIntfInfoHello
Hello interval.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.8
ospfVirtIntfInfoHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.9
ospfVirtIntfInfoDead
Dead interval.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.10
ospfVirtIntfInfoDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration
Enumerated Values:
0propagate
1hide
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.11
ospfVirtIntfInfoWait
Wait interval.
Integer32
Enumerated Values:
0non-nssa
1nssa
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.12
ospfVirtIntfInfoWaitMS
Units of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.13
ospfVirtIntfInfoRetra
Retransmit interval.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.14
ospfVirtIntfInfoAuth
Authentication.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.15
ospfVirtIntfInfoEvents
Events.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.16
ospfVirtIntfInfoNbr
The IP Address of the OSPF neighbor for this virtual interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.17
ospfVirtIntfInfoNbrState
State
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.18
ospfVirtIntfInfoAreaId
The AreaId of the virtual interface.
SNMPv2-SMIIpAddress
Constraints:
range: 0-8
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.4.1.19

ospfIfNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.5 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfIfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfIfNbrTable' 
The table of OSPF Interface Neighbor information.
ospfIfNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1
Information about a OSPF interface, neighbor pair.
Indexes
Column Syntax OID
ospfIfNbrIntfIndex
The OSPF Interface number for which this Interface/Nbr table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.1
ospfIfNbrIpAddr
The OSPF Neighbor ID .
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.2
ospfIfNbrPriority
The priority of the OSPF neighbor.
SNMPv2-SMIInteger32
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.3
ospfIfNbrState
The state of the OSPF neighbor.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.4
ospfIfNbrDesignatedRtr
The IP Address of the Designated Router for this OSPF Neighbor.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.5
ospfIfNbrBackupDesignatedRtr
The IP Address of the backup designated Router for this OSPF Neighbor.
SNMPv2-SMIIpAddress
Constraints:
range: 10-10
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.6
ospfIfNbrIpAddress
The IP Address of the OSPF Neighbor.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.5.1.7

ospfSumRangesInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.6 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfSumRangesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfSumRangesInfoTable' 
The table of OSPF summary ranges information.
ospfSumRangesInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1
Summary ranges information.
Indexes
No indexes recorded
Column Syntax OID
ospfSumRangesInfoIndex
The OSPF range index for which this table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.1
ospfSumRangesInfoArea
Area.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.2
ospfSumRangesInfoNetwork
Network.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.3
ospfSumRangesInfoMask
Mask.
SNMPv2-SMIIpAddress
Enumerated Values:
5asExternalLink
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.4
ospfSumRangesInfoAction
Action
propagate(0),
hide(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.5
ospfSumRangesInfoListType
Summary address list
Non-NSSA(0),
NSSA(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.6.1.6

ospfRoutesInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.7 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfRoutesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfRoutesInfoTable' 
The table of OSPF routes information.
ospfRoutesInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1
OSPF routes information.
Indexes
No indexes recorded
Column Syntax OID
ospfRoutesInfoIndex
The OSPF route table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1.1
ospfRoutesInfoDestination
Destination.
SNMPv2-SMIIpAddress
Constraints:
range: 36-36
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1.2
ospfRoutesInfoMask
Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1.3
ospfRoutesInfoVia
Next hop.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1.4
ospfRoutesInfoType
Route type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - best
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.4.7.1.5

ospfLsdbInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.8 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfLsdbInfoTable' 
The OSPF Process's Link State Database.
ospfLsdbInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1
A single Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
ospfLsdbInfoIndex
The 32 bit index in the table.
SNMPv2-SMIInteger32
Enumerated Values:
0down
1up
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.1
ospfLsdbInfoAreaId
The 32 bit identifier of the Area from which
the LSA was received.
SNMPv2-SMIIpAddress
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.2
ospfLsdbInfoType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.3
ospfLsdbInfoLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Enumerated Values:
0down
1loopback
2waiting
3ptop
4dr
5backupdr
6drother
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.4
ospfLsdbInfoRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.5
ospfLsdbInfoSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.6
ospfLsdbInfoAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.7
ospfLsdbInfoChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.8
ospfLsdbInfoAdvertisement
The entire Link State Advertisement, including
its header. When the LSA is invalid, it is
message string 'Invalid LSDB'.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.4.8.1.9

ospfExtLsdbInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.9 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfExtLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfExtLsdbInfoTable' 
The OSPF Process's Links State Database.
ospfExtLsdbInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1
A single Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
ospfExtLsdbInfoIndex
The 32 bit index in the table.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.1
ospfExtLsdbInfoType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
0seconds
1milliseconds
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.2
ospfExtLsdbInfoLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.3
ospfExtLsdbInfoRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Enumerated Values:
0seconds
1milliseconds
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.4
ospfExtLsdbInfoSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.5
ospfExtLsdbInfoAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.6
ospfExtLsdbInfoChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.7
ospfExtLsdbInfoAdvertisement
The entire Link State Advertisement, including
its header.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.4.9.1.8

ospfLoopIfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.4.10 · 1 row entry · 24 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospfLoopIfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospfLoopIfInfoTable' 
The table of OSPF Loopback Interface information.
ospfLoopIfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1
Information about a OSPF loopback interface.
Indexes
No indexes recorded
Column Syntax OID
ospfLoopIfInfoIndex
The OSPF loopback interface number
for which the OSPF info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.1
ospfLoopIfInfoIpAddress
The IP address of the OSPF loopback interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.2
ospfLoopIfInfoArea
The index of the area that the loopback interface belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.3
ospfLoopIfInfoAdminStatus
Admin Status of the interface:
down(0), up(1).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.4
ospfLoopIfInfoPassive
Passive status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
1up
2failed
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.5
ospfLoopIfInfoRouterIP
The router ID of the switch.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.6
ospfLoopIfInfoState
The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.7
ospfLoopIfInfoPriority
Interface router priority
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.8
ospfLoopIfInfoDesignatedRouterIP
The OSPF Designated Router IP (IP Address) for this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.9
ospfLoopIfInfoDesignatedRouterIpAddress
The OSPF Designated Router IP Address for this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.10
ospfLoopIfInfoBackupDesignatedRouterIP
The OSPF Backup Designated Router IP for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.11
ospfLoopIfInfoBackupDesignatedRouterIpAddress
The OSPF Backup Designated Router Ip Address for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.12
ospfLoopIfInfoHello
The hello timer for this OSPF interface.
Integer32
Enumerated Values:
1v3
2v2
3v1
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.13
ospfLoopIfInfoHelloMS
Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.14
ospfLoopIfInfoDead
The dead timer for this OSPF interface.
Integer32
Enumerated Values:
1exclude
2include
3na
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.15
ospfLoopIfInfoDeadMS
Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.16
ospfLoopIfInfoWaitInterval
The OSPF Wait interval for this OSPF interface.
SNMPv2-SMIInteger32
Enumerated Values:
1yes
2no
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.17
ospfLoopIfInfoWaitIntervalMS
Units of time measurement for Wait interval
seconds(0),
milliseconds(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.18
ospfLoopIfInfoRetransmit
The retransmit interval for this OSPF interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.19
ospfLoopIfInfoTransitDelay
The transit delay for this OSPF interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.20
ospfLoopIfInfoTotalNeighbours
The Total number of neighbours for this OSPF interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.21
ospfLoopIfInfoEvents
The total number of events for this OSPF interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.22
ospfLoopIfInfoAuthType
Type of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.23
ospfLoopIfInfoPtop
Point-to-point status of the interface:
disabled(0), enabled(1).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.4.10.1.24

gatewayInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk gatewayInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::gatewayInfoTable' 
The table containing information for the default gateways.
gatewayInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.5.1.1
A row in the gateway information table
Indexes
No indexes recorded
Column Syntax OID
gatewayInfoIndex
The gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.5.1.1.1
gatewayInfoAddr
The IP address of the default gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.5.1.1.2
gatewayInfoStatus
The status of the default gateway.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.5.1.1.4

igmpInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.6.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpInfoTable' 
The table of IGMP group membership information.
igmpInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1
Information about an IGMP group member .
Indexes
No indexes recorded
Column Syntax OID
igmpInfoIndex
The igmp group number for which the IGMP info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.1
igmpInfoGroupId
The IP address of the IGMP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.2
igmpInfoVlanId
The VLAN ID for this IGMP group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.3
igmpInfoSrcTrunk
The downstream trunk number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.4
igmpInfoSrcPortIndex
The downstream port number.
PortNumber .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.5
igmpInfoVersion
The Version of IGMP host.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.6
igmpInfoExpires
The expiration time for this host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.7
igmpInfoMode
The IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2).
Enumeration
Enumerated Values:
1up
2down
3disabled
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.8
igmpInfoSourceIp
The source IP address of the IGMP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.9
igmpInfoFwd
The IGMPv3 forwarding for this source/group IP for this host.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.10
igmpInfoGrpExpires
The expiration time for the group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.11
igmpInfoSrcPortAlias
The downstream port alias.
SNMPv2-TCDisplayString
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.1.1.12

igmpMrtrInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.6.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk igmpMrtrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::igmpMrtrInfoTable' 
The table of IGMP mrouters.
igmpMrtrInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1
Information about an IGMP mrouter.
Indexes
No indexes recorded
Column Syntax OID
igmpMrtrInfoIndex
The mrouter number for which the IGMP mrouter info table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.1
igmpMrtrInfoVlanId
The VLAN ID on which this IGMP mrouter is attached.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.2
igmpMrtrInfoPortId
The port/portchannel alias on which this IGMP mrouter is attached.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.3
igmpMrtrInfoVersion
The version of this IGMP mrouter.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.4
igmpMrtrInfoExpires
The expiration time for this mrouter.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.5
igmpMrtrInfoMrt
The Maximum Query Response time of this IGMP mrouter.
SNMPv2-SMIInteger32
Constraints:
range: 1-15
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.6
igmpMrtrInfoQrv
The Querier Robustness value of this IGMP mrouter.
SNMPv2-SMIInteger32
Enumerated Values:
1none
2password
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.7
igmpMrtrInfoQqic
The Querier query interval code of this IGMP mrouter.
SNMPv2-SMIInteger32
Constraints:
range: 0-16
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.8
igmpMrtrInfoSrcIp
The Source IP of this IGMP mrouter.
SNMPv2-SMIIpAddress
Enumerated Values:
1both
2listen
3supply
4none
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.10
igmpMrtrInfoPortAlias
The port/portchannel alias on which this IGMP mrouter is attached.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.6.2.1.11

ipIntfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.9.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipIntfInfoTable' 
The table of IP interface information.
intfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1
A row in IP interface information table.
Indexes
No indexes recorded
Column Syntax OID
intfInfoIndex
The interface number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.1
intfInfoAddr
The IP address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.3
intfInfoNetMask
The subnet mask of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.4
intfInfoBcastAddr
The broadcast address of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.5
intfInfoVlan
The VLAN number for this interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.6
intfInfoStatus
The status of the interface.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.9.1.1.7

rip2InfoIntfTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.10.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk rip2InfoIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::rip2InfoIntfTable' 
The information table of RIP.
ripInfoIntfEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1
Information about RIP on IP interface.
Indexes
No indexes recorded
Column Syntax OID
ripInfoIntfIndex
The interface number for which the RIP information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.1
ripInfoIntfVersion
RIP version.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.2
ripInfoIntfAddress
The interface address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.3
ripInfoIntfState
The status of RIP protocol.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.4
ripInfoIntfListen
The status of listening to route updates.
Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.5
ripInfoIntfTrigUpdate
The status of triggered updates.
Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.6
ripInfoIntfMcastUpdate
The status of multicast updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.7
ripInfoIntfPoisonReverse
The status of RIP poison reverse.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.8
ripInfoIntfSupply
The status of supplying route updates.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.9
ripInfoIntfMetric
RIP route metric for this interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.10
ripInfoIntfAuth
The type of Authentication used on this interface.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.11
ripInfoIntfKey
RIP update authentication password.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.12
ripInfoIntfDefault
Specifies what RIP does with default routes.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.10.2.1.13

rip2InfoRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.10.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk rip2InfoRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::rip2InfoRtrTable' 
The routing information table of RIP.
ripInfoRtrEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1
Information about RIP routes.
Indexes
No indexes recorded
Column Syntax OID
ripInfoRtrIndex
The index number of RIP route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1.1
ripInfoRtrDestIp
The destination ip address of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1.2
ripInfoRtrMask
The destination ip mask of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1.3
ripInfoRtrGateway
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1.4
ripInfoRtrMetric
The metric for this route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.10.3.1.10

bgpInfoPeerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.1 · 1 row entry · 18 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoPeerTable' 
The table of BGP peer in the current configuration block.
bgpInfoPeerEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1
Information about a BGP peer.
Indexes
No indexes recorded
Column Syntax OID
bgpInfoPeerIndex
The BGP peer number for which the BGP peer table is related.
SNMPv2-SMIInteger32
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.1
bgpInfoPeerRemoteAddr
The remote IP address of the BGP peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.2
bgpInfoPeerVersion
The version negotiated by the BGP peer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.3
bgpInfoPeerTtl
The time-to-live value of the BGP peer IP datagram.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.4
bgpInfoPeerRemoteAs
The remote IP address of the BGP peer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.5
bgpInfoPeerRouterId
The router IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.6
bgpInfoPeerState
The BGP status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.7
bgpInfoPeerLastState
The BGP old status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.8
bgpInfoTotalReceivedPackets
The total number of received packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.9
bgpInfoTotalSentPackets
The total number of sent packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.10
bgpInfoReceivedUpdates
The number of received updates.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.11
bgpInfoSentUpdates
The number of sent updates.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.12
bgpInfoKeepalive
The keep alive time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.13
bgpInfoHoldtime
The hold time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.14
bgpInfoMinAdvTime
The MinAdvTime.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.15
bgpInfoLastErrorCode
The last error code.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.16
bgpInfoLastErrorSubCode
The last error subcode.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.17
bgpInfoEstTransitions
The established state transitions.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.1.1.18

bgpInfoSummaryTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.2 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoSummaryTable' 
The table of BGP Peer Information.
bgpInfoSummaryEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1
Information about a BGP Peer.
Indexes
No indexes recorded
Column Syntax OID
bgpInfoSummaryIndex
The BGP Peer number for which the BGP Peer table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.1
bgpInfoSummaryRemoteAddr
The remote IP address of the BGP Peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.2
bgpInfoSummaryVersion
The version negotiated by the BGP Peer.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.3
bgpInfoSummaryRemoteAs
The Remote AS.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.4
bgpInfoSummaryState
The BGP status.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.5
bgpInfoSummaryTotalReceivedPackets
The total number of received packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.6
bgpInfoSummaryTotalSentPackets
The total number of sent packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.2.1.7

bgpInfoRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.3 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoRtrTable' 
The table of BGP router run-time information
bgpInfoRtrTableEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1
The run-time information about a BGP router
Indexes
Column Syntax OID
bgpInfoIndex
The BGP router index which is the network address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.1
bgpInfoNetwork
The BGP network address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.2
bgpInfoNextHop
The BGPs NextHop addresses from a network.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.3
bgpInfoMetr
The BGPs metric from a network.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.4
bgpInfoLcPrf
The BGPs local preference from a network.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.5
bgpInfoWght
Total weight of AS paths from a network.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.6
bgpInfoPath
The AS paths from a network.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.7
bgpInfoOrigin
The BGPs route origin from a network
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.8
bgpInfoMask
The BGP router subnet mask.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.3.1.9

bgpInfoGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.4 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoGroupTable' 
The table of BGP group in the current configuration block.
bgpInfoGroupEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1
Information about a BGP group.
Indexes
No indexes recorded
Column Syntax OID
bgpInfoGroupIndex
The BGP group number for which the BGP group table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.1
bgpInfoGroupName
The BGP group nname for which the BGP group table is related.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.2
bgpInfoGroupRemoteAddr
The remote IP address of the BGP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.3
bgpInfoGroupRemoteMask
The remote mask of the BGP group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.4
bgpInfoGroupLimit
The maximum number of BGP dynamic peers.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.5
bgpInfoGroupPeersNum
The total number of BGP dynamic peers.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.6
bgpInfoGroupState
BGP group state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.11.4.1.7

bgpInfoGroupRASTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoGroupRASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoGroupRASTable' 
The table of BGP group RASs in the current configuration block.
bgpInfoGroupRASEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.5.1
Information about a BGP group RAS.
Indexes
No indexes recorded
Column Syntax OID
bgpInfoGroupRASIndex
The BGP group RAS number for which the BGP group RAS table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.5.1.1
bgpInfoGroupRAS
The remote AS number of the BGP group bgpInfoGroupIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.5.1.2

bgpInfoDynamicPeerTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.11.6 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk bgpInfoDynamicPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::bgpInfoDynamicPeerTable' 
The table of BGP dynamic peers.
bgpInfoDynamicPeerEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1
Information about a BGP dynamic peer.
Indexes
No indexes recorded
Column Syntax OID
bgpInfoDynamicPeerIndex
The BGP dynamic peer number for which the BGP peer table
is related.
SNMPv2-SMIInteger32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.1
bgpInfoDynamicPeerRemoteAddr
The remote IP address of the BGP dynamic peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.2
bgpInfoDynamicPeerGroup
The group of BGP dynamic peer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.3
bgpInfoDynamicPeerVersion
The version negotiated by the BGP dynamic peer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.4
bgpInfoDynamicPeerTtl
The time-to-live value of the BGP dynamic peer IP datagram.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.5
bgpInfoDynamicPeerRemoteAs
The remote AS number of the BGP dynamic peer.
SNMPv2-SMIInteger32
Enumerated Values:
1enable
2disable
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.6
bgpInfoDynamicPeerRouterId
The router IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.7
bgpInfoDynamicTotalReceivedPackets
The total number of received packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.8
bgpInfoDynamicTotalSentPackets
The total number of sent packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.9
bgpInfoDynamicReceivedUpdates
The number of received updates.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.10
bgpInfoDynamicSentUpdates
The number of sent updates.
SNMPv2-SMIInteger32
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.11
bgpInfoDynamicKeepalive
The keep alive time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.12
bgpInfoDynamicHoldtime
The hold time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.13
bgpInfoDynamicMinAdvTime
The MinAdvTime.
SNMPv2-SMIInteger32
Enumerated Values:
2local
3static
4nbrdis
5ripng
6ospf
10intmgmt
11extmgmt
12intmgmtND
13extmgmtND
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.11.6.1.14

nbrInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.12.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk nbrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::nbrInfoTable' 
The table of nbrcache information.
nbrInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1
Information about neighbor discovery protocol.
Indexes
Column Syntax OID
nbrInfoIndex
The index of the nbrcache entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.1
nbrInfoDestIp
The destination IP address of the nbrcache entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.2
nbrInfoState
The state of the nbrcache entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.3
nbrInfoMacAddr
The MAC address for the nbrcache entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.4
nbrInfoVlanId
The VLAN identifier for the nbrcache entry.
SNMPv2-SMIInteger32
Enumerated Values:
1up
2down
3disabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.5
nbrInfoPortNum
The port number on which this entry's equivalence is effective.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.6
nbrInfoAge
The used time for the nbrcache entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.7
nbrInfoInterface
The interface number for which the destination address is applicable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.8
nbrInfoPortAlias
Alias for port number.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.12.1.1.9

gatewayIPv6InfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.13.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk gatewayIPv6InfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::gatewayIPv6InfoTable' 
The table containing information for the IPv6 default gateways.
gatewayIPv6InfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.13.1.1
A row in the IPv6 gateway information table
Indexes
No indexes recorded
Column Syntax OID
ipGatewayIPv6InfoIndex
The IPv6 gateway number for which the information is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.13.1.1.1
ipGatewayIPv6InfoAddr
The IP address for the IPv6 default gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.13.1.1.2
ipGatewayIPv6InfoState
The state for the IPv6 Default Gateway.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.13.1.1.3

ipRoute6InfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.14.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipRoute6InfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipRoute6InfoTable' 
The table of run-time IP6 routes.
ipRoute6InfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1
A row in the run-time IP6 route table.
Indexes
No indexes recorded
Column Syntax OID
ipRoute6InfoIndx
The index of this route6 table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.1
ipRoute6InfoDestIp
The destination of the route.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.2
ipRoute6InfoPrefLen
The destination prefix length of the route.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.3
ipRoute6InfoInterface
The interface of the route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.4
ipRoute6InfoNextHop
The next hop of the route.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.5
ipRoute6InfoProto
The protocol type of the route.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.14.1.1.6

ipIntfLoopbackInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.16.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipIntfLoopbackInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipIntfLoopbackInfoTable' 
The table of IP Loopback interface information.
intfLoopbackInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1
A row in IP Loopback interface information table.
Indexes
No indexes recorded
Column Syntax OID
intfLoopbackInfoIndex
The Loopback interface number for which the information is related.
SNMPv2-SMIInteger32
Enumerated Values:
0down
1up
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1.1
intfLoopbackInfoAddr
The IP address of the interface.
SNMPv2-TCDisplayString
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1.3
intfLoopbackInfoNetMask
The subnet mask of the interface.
SNMPv2-TCDisplayString
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1.4
intfLoopbackInfoBcastAddr
The broadcast address of the interface.
SNMPv2-TCDisplayString
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
8standby
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1.5
intfLoopbackInfoStatus
The status of the interface.
Enumeration
Constraints:
range: 1-255
 .1.3.6.1.4.1.26543.2.7.4.3.3.16.1.1.7

ospf3AreaInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.18.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3AreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3AreaInfoTable' 
The table of OSPFv3 Area information.
ospf3AreaInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1
Information about a OSPFv3 area.
Indexes
No indexes recorded
Column Syntax OID
ospf3AreaInfoIndex
The OSPFv3 area number for which the OSPFv3 info table is related.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.1
ospf3AreaInfoId
The IP address of the OSPFv3 area.
SNMPv2-SMIIpAddress
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.2
ospf3AreaInfoStatus
Area Status:
active(1), notInService(2), notReady(3).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.3
ospf3TotalNumberOfInterfaces
The total number of interfaces for this OSPFv3 area.
SNMPv2-SMIInteger32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.4
ospf3NumberOfInterfacesUp
The number of interfaces UP in area.
SNMPv2-SMIInteger32
Constraints:
range: 1-3600
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.5
ospf3AreaInfoSPF
The number of times SPF ran.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.6
ospf3NumberOfLsdbEntries
The total number of Area-scope link state
advertisements in this area's link state
database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.7
ospf3AreaInfoAreaBorderRouter
The Area Border Router count.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.8
ospf3AreaInfoASBoundaryRouter
The AS Boundary Router count.
SNMPv2-SMIInteger32
Constraints:
range: 256-4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.9
ospf3AreaInfoNeighborsFULLstate
Total neighbors in FULL state.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.10
ospf3AreaInfoVirtNeighborsFULLstate
Total neighbors in FULL state.
SNMPv2-SMIInteger32
Enumerated Values:
0none
1sha1
2md5
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.11

ospf3IntfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.18.3 · 1 row entry · 30 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IntfInfoTable' 
The table of OSPFv3 Interface information.
ospf3IntfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1
Information about a OSPFv3 interface.
Indexes
No indexes recorded
Column Syntax OID
ospf3IfInfoIndex
The OSPFv3 interface number for which the OSPFv3 info table is related.
SNMPv2-SMIInteger32
Enumerated Values:
0disabled
1enabled
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.1
ospf3IfInfoInstanceID
The OSPFv3 interface instance id.
SNMPv2-SMIUnsigned32
Enumerated Values:
0null
3aes
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.2
ospf3IfInfoLLocalAddress
The IP address of the OSPFv3 interface.
SNMPv2-TCDisplayString
Constraints:
range: 4-48
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.3
ospf3IfInfoAreaID
The AreaID of the area that the interface belongs.
SNMPv2-SMIIpAddress
Enumerated Values:
0none
1sha1
2md5
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.4
ospf3IfInfoAdminStatus
Admin Status of the interface:
down(0), up(1).
Enumeration
Constraints:
range: 4-40
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.5
ospf3IfInfoPassive
Passive status of the interface:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.6
ospf3IfInfoNetworkType
Network type of the interface:
broadcast(1),nbma(2),pointToPoint(3),pointToMultipoint(5).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.7
ospf3IfInfoState
The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.8
ospf3IfInfoPriority
Interface router priority
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.9
ospf3IfInfoDesignatedRouterID
The OSPFv3 Designated Router ID for this OSPFv3 interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.10
ospf3IfInfoBackupDesignatedRouterID
The OSPFv3 Backup Designated Router ID for this OSPFv3
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.11
ospf3IfInfoHello
The hello timer for this OSPF3 interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.12
ospf3IfInfoDead
The dead timer for this OSPFv3 interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.13
ospf3IfInfoPoll
The OSPFv3 Poll interval for this OSPFv3 interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.14
ospf3IfInfoRetransmit
The retransmit interval for this OSPFv3 interface.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.15
ospf3IfInfoTransitDelay
The transit delay for this OSPFv3 interface.
Integer32
Enumerated Values:
1down
4pointToPoint
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.16
ospf3IfInfoTotalNeighbours
The total number of neighbours for this OSPFv3 interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.17
ospf3IfInfoEvents
The total number of events for this OSPF3 interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.18
ospf3IfInfoMetricCost
The cost of this OSPF3 interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.19
ospf3IfInfoAuthSpi
Authentication Spi Id(256 - 4294967295)
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.20
ospf3IfInfoAuthEnable
Authentication Status
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.21
ospf3IfInfoAuthType
Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.22
ospf3IfInfoAuthKey
Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.23
ospf3IfInfoEncrySpi
Encryption Spi Id(256 - 4294967295)
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.24
ospf3IfInfoEncryEnable
Encryption Status
disabled(0),
enabled(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.25
ospf3IfInfoEncryType
Encryption Authentication Type
null(0),
aes(3)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.26
ospf3IfInfoEncryKey
Encryption Key
Hex-string AES key - 32 chars (128 bits)
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.27
ospf3IfInfoEncryAuthType
Encryption Authentication Type
none(0),
md5(2),
sha1(1)
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.28
ospf3IfInfoEncryAuthKey
Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)
OctetString
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.29
ospf3IfInfoLsaSupress
Lsa supression status of the interface:
disabled(0), enabled(1).
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.3.1.30

ospf3VirtIntfInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.18.4 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3VirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3VirtIntfInfoTable' 
The table of OSPFv3 Virtual Interface information.
ospf3VirtIntfInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1
Information about a single virtual interface.
Indexes
Column Syntax OID
ospf3VirtIfInfoIndex
The OSPFv3 virtual interface number for which the OSPFv3
info table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.1
ospf3VirtIfInfoAreaId
The transit area that the virtual link
traverses. By definition, this is not
Area 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.2
ospf3VirtIfInfoNeighbor
The Router ID of the virtual neighbor.
SNMPv2-SMIIpAddress
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.3
ospf3VirtIfInfoTransitDelay
The estimated number of seconds it takes to
transmit a Link State Update packet over this
interface.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.5
ospf3VirtIfInfoRetransInterval
The number of seconds between link state
advertisement retransmissions for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State Request packets. This…
secondsSNMPv2-SMIInteger32
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.6
ospf3VirtIfInfoHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.7
ospf3VirtIfInfoRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neig…
secondsSNMPv2-SMIInteger32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.8
ospf3VirtIfInfoState
OSPF virtual interface states.
Enumeration
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.9
ospf3VirtIfInfoEvents
The number of state changes or error events on
this virtual link.

Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by th…
SNMPv2-SMIInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.10
ospf3VirtIfInfoStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.11
ospf3VirtIfInfoLinkScopeLsaCount
The total number of Link-scope link state
advertisements in this virtual link's link state
database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.12
ospf3VirtIfInfoLinkLsaCksumSum
The 32-bit unsigned sum of the Link-scope link state
advertisements' LS checksums contained in this
virtual link's link state database. The sum can be used
to determine if there has been a change in a
router's link sta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.4.1.13

ospf3IfNbrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.18.5 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3IfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3IfNbrTable' 
The table of OSPFv3 Interface Neighbor information.
ospf3IfNbrEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1
Information about a OSPFv3 interface, neighbor pair.
Indexes
No indexes recorded
Column Syntax OID
ospf3IfNbrInfoIndex
The OSPFv3 neighbor table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.1
ospf3IfNbrIntfIndex
The OSPFv3 Interface number for which this Nbr table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.2
ospf3IfNbrIntfInstanceID
The OSPFv3 Interface instance id for which this Nbr table is
related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.3
ospf3IfNbrRtrID
A 32-bit unsigned integer uniquely identifying the
neighboring router in the Autonomous System.
SNMPv2-SMIIpAddress
Enumerated Values:
1up
2down
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.4
ospf3IfNbrIpAddress
The IPv6 address of the neighbor associated with
the local link.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.5
ospf3IfNbrPriority
The priority of the OSPFv3 neighbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.6
ospf3IfNbrState
The state of the relationship with this
neighbor.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.7
ospf3IfNbrEvents
The number of times this neighbor relationship
has changed state or an error has occurred.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.5.1.8

ospf3RoutesInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.18.6 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ospf3RoutesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ospf3RoutesInfoTable' 
The table of OSPFv3 routes information.
ospf3RoutesInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1
OSPFv3 routes information.
Indexes
No indexes recorded
Column Syntax OID
ospf3RoutesInfoIndex
The OSPFv3 route table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.1
ospf3RoutesInfoDestination
The Destination IPv6 Address of this route.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.2
ospf3RoutesInfoPrefixLen
Indicates the prefix length of the destination Address.
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.3
ospf3RoutesInfoNextHop
Next Hop IPv6 Address for this route. For direct routes it has the
value ::0.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.4
ospf3RoutesInfoType
Type of the route
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.5
ospf3RoutesInfoAreaId
Area ID associated with the route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.6
ospf3RoutesInfoCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.7
ospf3RoutesInfoType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates…
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.8
ospf3RoutesInfoInterfaceIndex
Interface Index associated with the route
Integer32 .1.3.6.1.4.1.26543.2.7.4.3.3.18.6.1.9

ipRouteEcmpInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.19.1 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipRouteEcmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipRouteEcmpInfoTable' 
The table of run-time IP routes.
ipRouteEcmpInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1
A row in the run-time IP route table
Indexes
No indexes recorded
Column Syntax OID
ipRouteEcmpInfoDestIndx
The index of unique destinations IP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.1
ipRouteEcmpInfoGwIndx
The index of the gateway per destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.2
ipRouteEcmpInfoDest
The destination IP of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.3
ipRouteEcmpInfoMask
The destination IP mask of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.4
ipRouteEcmpInfoGateway
The next-hop router address for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.5
ipRouteEcmpInfoInterface
The interface for the next-hop.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.6
ipRouteEcmpInfoGwStatus
The Up/Down status of the gateway
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.19.1.1.7

ipv6PmtuInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.21.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipv6PmtuInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipv6PmtuInfoTable' 
The table of Ipv6 PMTU entries.
ipv6PmtuInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.21.1.1
A row in the ipv6 PMTU entries table.
Indexes
No indexes recorded
Column Syntax OID
ipv6PmtuInfoIndx
The index of this ipv6 PMTU table entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.21.1.1.1
ipv6PmtuInfoDestIp
The destination of the pMTU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.21.1.1.2
ipv6PmtuInfoSinceTime
The addubt time of the pMTU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.21.1.1.3
ipv6PmtuInfoValue
The vlaue of this ipv6 PMTU table entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.21.1.1.4

mldInfoGroupsTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.22.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldInfoGroupsTable' 
The table listing the IPv6 multicast
groups for which there are members on a particular interface.
mldInfoGroupEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1
An entry in the mldInfoGroupsTable
Indexes
No indexes recorded
Column Syntax OID
mldInfoGroupIfIndex
The internetwork-layer interface for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.1
mldInfoGroupAddress
The IPv6 multicast group address for which this entry
contains information. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.2
mldInfoGroupPortNumber
The port number for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.3
mldInfoGroupVlanID
The VLAN ID for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.4
mldInfoGroupLastReporter
The IPv6 address of the source of the last membership
report received for this IPv6 Multicast group address on
this interface. If no membership report has been
received, this object has the value 00:0:00:00:00:00:00:00…
INET-ADDRESS-MIBInetAddressIPv6
Enumerated Values:
1up
2down
Type Constraints:
range: 16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.5
mldInfoGroupSource
ONLY for MLDv2. The IPv6 address for which the this entry's
filter is applied. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.6
mldInfoGroupFilterType
ONLY for MLDv2. The filter type for the specified source.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.7
mldInfoGroupExpiryTime
The minimum amount of time remaining before this entry
will be aged out. A value of 0 indicates that the entry
is only present because mldCacheSelf is true and that if
the router left the group, this entry would be age…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.8
mldInfoGroupVersion
The version of this MLD entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.9
mldInfoGroupFwd
Specifies if forwarding is enabled for this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.10
mldInfoGroupId
MLD group index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.11
mldInfoGroupPortAlias
The port alias for which this entry
contains information for an IPv6 multicast group address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.1.1.12

mldInfoMRoutersTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.22.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoMRoutersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldInfoMRoutersTable' 
The table listing the IPv6 multicast routers on an interface.
mldInfoMRouterEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1
An entry in the mldInfoMRoutersTable
Indexes
Column Syntax OID
mldInfoMRouterIfIndex
The interface on which the multicast router is learnt.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.1
mldInfoMRouterSrcIp
The multicast router's ip.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.2
mldInfoMRouterPortNumber
The port on which the multicast router is learnt.
SNMPv2-SMIInteger32
Enumerated Values:
0any
50esp
51ah
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.3
mldInfoMRouterVlan
The vlan in which the multicast router is learnt.
SNMPv2-SMIInteger32
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.4
mldInfoMRouterQrv
This multicast router's Maximum Response Delay
SNMPv2-SMIInteger32
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.5
mldInfoMRouterQqic
ONLY for MLDv2. This multicast router's QQIC
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.6
mldInfoMRouterMaxRespDelay
This multicast router's Maximum Response Delay.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.7
mldInfoMRouterVersion
This multicast router's MLD version.
SNMPv2-SMIInteger32
Enumerated Values:
0any
1transport
2tunnel
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.8
mldInfoMRouterExpiryTime
This multicast router's expiry time.
SNMPv2-TCDisplayString
Enumerated Values:
0any
1md5
2sha1
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.9
mldInfoMRouterId
This multicast router's index.
SNMPv2-SMIInteger32
Constraints:
range: 20-64
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.10
mldInfoMRouterPortAlias
The port alias on which the multicast router is learnt.
SNMPv2-TCDisplayString
Enumerated Values:
0any
1des
2triple-des
3blowfish
4aes
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.2.1.11

mldInfoInterfaceTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.22.4 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk mldInfoInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::mldInfoInterfaceTable' 
The (conceptual) table listing the informatio of interfaces on which
MLD is enabled.
mldInfoInterfaceEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1
An entry (conceptual row) representing the information of an
interface on which MLD is enabled.
Indexes
No indexes recorded
Column Syntax OID
mldInfoInterfaceIfIndex
The internetwork-layer interface value of the interface
for which MLD is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.1
mldInfoInterfaceState
The internetwork-layer interface value of the interface
for which MLD is enabled.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.2
mldInfoInterfaceVersion
The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.3
mldInfoInterfaceQuerierStatus
Specifies if the switch is Querier or not
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.4
mldInfoInterfaceQuerier
The address of the MLD Querier on the IPv6 subnet to
which this interface is attached.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x
INET-ADDRESS-MIBInetAddressIPv6
Enumerated Values:
1drop
2apply
3permit
4bypass
Type Constraints:
range: 16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.5
mldInfoInterfaceQuerierExpiryTime
The time remaining before the Other Querier Present
Timer expires. If the local system is the querier,
the value of this object is zero.
SNMPv2-TCDisplayString
Constraints:
range: 16-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.6
mldInfoInterfaceQuerierPortIndex
The port on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero.
SNMPv2-SMIInteger32
Constraints:
range: 16-16
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.7
mldInfoInterfaceGroups
The current number of entries for this interface in the
Cache Table.
SNMPv2-SMIInteger32
Enumerated Values:
0any
1transport
2tunnel
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.8
mldInfoInterfaceQuerierPortAlias
The port alias on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.3.3.22.4.1.9

ipsecSaInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.23.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecSaInfoTable' 
The (conceptual) table listing all of the IPsec SA information.
ipsecSaInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1
An entry (conceptual row) representing a IPsec SA information.
Indexes
Column Syntax OID
ipsecSaInfoIndex
The index of ipsecSaInfoEntry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.1
ipsecSaInfoSpi
The SPI used by the SA.
SNMPv2-SMIUnsigned32
Enumerated Values:
0ah
1esp
2esp-auth
3esp-null
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.2
ipsecSaInfoProto
The proto(AH,ESP,or Both) used by the SA.
Enumeration
Enumerated Values:
0any
1md5
2sha1
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.3
ipsecSaInfoDstAddr
The destination IP address for the SA.
OctetString
Enumerated Values:
0any
1des
2triple-des
3blowfish
4aes
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.4
ipsecSaInfoSrcAddr
The source IP address for the SA.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.5
ipsecSaInfoFlags
The direction, initiator and etc for an SA; see flag constants below:
SA_FLAG_INUSE 0x0001
SA_FLAG_DELETED 0x0002
SA_FLAG_INBOUND 0x0004
SA_FLAG_INITIATOR 0x0008
SA_FLAG_MATURE 0x0010
…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.6
ipsecSaInfoUlp
The upper layer protocol for an SA; 0=any; see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.7
ipsecSaInfoMode
The mode for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.8
ipsecSaInfoAuthAlg
The authentication algorithm for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.9
ipsecSaInfoAuthKey
The authentication key for the SA.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.10
ipsecSaInfoEncrAlg
The encryption algorithm for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.11
ipsecSaInfoEncrKey
The encryption key for the SA.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.23.1.1.12

ipsecSpdInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.23.2 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSpdInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecSpdInfoTable' 
The (conceptual) table listing all of the IPsec security policy information.
ipsecSpdInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1
An entry (conceptual row) representing a IPsec security policy information.
Indexes
No indexes recorded
Column Syntax OID
ipsecSpdInfoIndex
The index of ipsecSpdInfoEntry.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-20
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.1
ipsecSpdInfoFlags
The direction, initiator and etc for an SA; see flag constants below:
SP_FLAG_INUSE 0x00000001
SP_FLAG_DELETED 0x00000002
SP_FLAG_INBOUND 0x00000004
SP_FLAG_MIRRORED 0x00000008

SP…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.2
ipsecSpdInfoULP
The transport layer protocol for the SA. 0 = any. see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.3
ipsecSpdInfoAction
The IPsec action for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.4
ipsecSpdInfoDstAddr
The destination IP address for the SA.
OctetString
Enumerated Values:
1ok
2backup
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.5
ipsecSpdInfoSrcAddr
The source IP address for the SA.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.6
ipsecSpdInfoMode
The mode for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.7
ipsecSpdInfoSaSize
The SA bundle size of an Security policy.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.2.1.8

ipsecSpdInfoSaTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.23.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ipsecSpdInfoSaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ipsecSpdInfoSaTable' 
The (conceptual) table listing all information of the SA nested in an IPsec security policy.
ipsecSpdInfoSaEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1
An entry (conceptual row) representing a SA information netsted in an IPsec security policy.
Indexes
No indexes recorded
Column Syntax OID
ipsecSpdInfoSaIndex
The index that enumerates the IPsec nested SAs .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1.1
ipsecSpdInfoSaSecuProto
The security protocol for the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1.2
ipsecSpdInfoSaAuthAlg
The hash algorithm used by the SA.
Enumeration .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1.3
ipsecSpdInfoSaEncrAlg
The encryption algorithm used by the SA.
Enumeration
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1.4
ipsecSpdInfoSaEncrKeyLen
The encryption key length of an nested SA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.3.3.23.3.1.5

dhcpSnoopingBindingInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.3.3.24.1 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk dhcpSnoopingBindingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::dhcpSnoopingBindingInfoTable' 
DHCP Snooping binding Table.
dhcpSnoopingBindingInfoEntry row .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1
A row in the DHCP Snooping binding Table
Indexes
Column Syntax OID
dhcpSnoopingBindingInfoIndex
Index of this DHCP Snooping binding entry.
SNMPv2-SMIInteger32
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.1
dhcpSnoopingBindingInfoMac
Mac Address of this DHCP Snooping binding entry.
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.2
dhcpSnoopingBindingInfoIp
Ip Address of this DHCP Snooping binding entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.3
dhcpSnoopingBindingInfoVLAN
VLAN ID of this DHCP Snooping binding entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.4
dhcpSnoopingBindingInfoPortIndex
Port Number of this DHCP Snooping binding entry.
SNMPv2-SMIInteger32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.5
dhcpSnoopingBindingInfoExpiry
The lease time of this DHCP Snooping binding entry.
Set 0 to remove this entry
SNMPv2-SMIUnsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.6
dhcpSnoopingBindingInfoType
Show How this DHCP Snooping binding entry come from.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.7
dhcpSnoopingBindingInfoPortAlias
Alias for port Number of this DHCP Snooping binding entry.
OctetString .1.3.6.1.4.1.26543.2.7.4.3.3.24.1.1.8

vrrpOperVirtRtrTable

table
.1.3.6.1.4.1.26543.2.7.4.3.4.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vrrpOperVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vrrpOperVirtRtrTable' 
An entry in the table of virtual routers.
vrrpOperVirtRtrEntry row .1.3.6.1.4.1.26543.2.7.4.3.4.1.1.1
A row in the vrrpOperVirtRtrTable
Indexes
No indexes recorded
Column Syntax OID
vrrpOperVirtRtrIndex
The index for the VRRP virtual router.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.3.4.1.1.1.1
vrrpOperVirtRtrBackup
When set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.3.4.1.1.1.2

qosCurCfgPortPriorityTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosCurCfgPortPriorityTable' 
The table of QOS Port Priority configuration.
qosCurCfgPortPriorityEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.1.1
Information about a particular QOS Port Priority configuration.
Indexes
No indexes recorded
Column Syntax OID
qosCurCfgPortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.26543.2.7.4.8.1.1.1.1.1
qosCurCfgPortPriority
Switch Port Priority Should be between 0 and 7
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.1.1.1.2
qosCurCfgPortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Constraints:
range: 0-63
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.8.1.1.1.1.3

qosNewCfgPortPriorityTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosNewCfgPortPriorityTable' 
The table of QOS Port Priority configuration.
qosNewCfgPortPriorityEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.2.1
Information about a particular QOS Port Priority configuration.
Indexes
No indexes recorded
Column Syntax OID
qosNewCfgPortIndex
Switch Port Number
PortNumber .1.3.6.1.4.1.26543.2.7.4.8.1.1.2.1.1
qosNewCfgPortPriority
Switch Port Priority Should be between 0 and 7
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.8.1.1.2.1.2
qosNewCfgPortAlias
Switch Port Alias
SNMPv2-TCDisplayString
Constraints:
range: 0-63
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.8.1.1.2.1.3

qosCurCfgPriorityCoSTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosCurCfgPriorityCoSTable' 
The table of Frame Priority and COSq configuration.
qosCurCfgPriorityCoSEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.3.1
Information about a particular Frame Priority and COSq configuration.
Indexes
No indexes recorded
Column Syntax OID
qosCurCfgPriorityIndex
Frame priority Number
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.1.3.1.1
qosCurCfgPriorityCoSq
CoSq for a Frame Priority Should be between 0 and 7
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.1.3.1.2

qosNewCfgPriorityCoSTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosNewCfgPriorityCoSTable' 
The table of Frame Priority and COSq configuration.
qosNewCfgPriorityCoSEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.4.1
Information about a particular Frame Priority and COSq configuration.
Indexes
No indexes recorded
Column Syntax OID
qosNewCfgPriorityIndex
Frame priority Number
Integer32
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.26543.2.7.4.8.1.1.4.1.1
qosNewCfgPriorityCoSq
CoSq for a Frame Priority Should be between 0 and 7
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.8.1.1.4.1.2

qosCurCfgCosWeightTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosCurCfgCosWeightTable' 
The table of CoSq and Weight configuration.
qosCurCfgCosWeightEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.5.1
Information about a particular CoSq and Weight configuration.
Indexes
No indexes recorded
Column Syntax OID
qosCurCfgCosIndex
CoSq Number
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.1.5.1.1
qosCurCfgCosWeight
Weight of CoSq
Integer32
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.26543.2.7.4.8.1.1.5.1.2

qosNewCfgCosWeightTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosNewCfgCosWeightTable' 
The table of CoSq and Weight configuration.
qosNewCfgCosWeightEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.1.6.1
Information about a particular CoSq and Weight configuration.
Indexes
No indexes recorded
Column Syntax OID
qosNewCfgCosIndex
CoSq Number
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.1.6.1.1
qosNewCfgCosWeight
Weight of CoSq
Integer32r/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.26543.2.7.4.8.1.1.6.1.2

qosCurCfgDscpTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosCurCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosCurCfgDscpTable' 
The table of Dscp to New Dscp/802.1p priority configuration.
qosCurCfgDscpEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.2.1.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Indexes
No indexes recorded
Column Syntax OID
qosCurCfgDscpIndex
Dscp value
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.2.1.1.1
qosCurCfgMapDscp
Map Dscp Value
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.2.1.1.2
qosCurCfgMap8021p
Map 802.1p value
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.2.1.1.3

qosNewCfgDscpTable

table
.1.3.6.1.4.1.26543.2.7.4.8.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk qosNewCfgDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::qosNewCfgDscpTable' 
The table of Dscp to New Dscp/802.1p priority configuration.
qosNewCfgDscpEntry row .1.3.6.1.4.1.26543.2.7.4.8.1.2.2.1
Information about a particular Dscp to New Dscp/802.1p priority configuration
Indexes
No indexes recorded
Column Syntax OID
qosNewCfgDscpIndex
Dscp value
Integer32 .1.3.6.1.4.1.26543.2.7.4.8.1.2.2.1.1
qosNewCfgMapDscp
Map Dscp Value
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.8.1.2.2.1.2
qosNewCfgMap8021p
Map 802.1p value
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.8.1.2.2.1.3

aclCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.1.1 · 1 row entry · 37 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclCurCfgTable' 
The table of current ACL configuration.
aclCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1
Current information about a particular ACL configuration entry.
Indexes
No indexes recorded
Column Syntax OID
aclCurCfgIndex
The index associated with this ACL entry.
SNMPv2-SMIUnsigned32
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.1
aclCurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.4
aclCurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this ACL entry.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.5
aclCurCfgSrcMACAddress
The source MAC address to be filtered.
SNMPv2-TCMacAddress
Constraints:
range: 64-10000000
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.9
aclCurCfgSrcMACMask
The address mask applied to aclCurCfgSrcMACAddress for filtering.
SNMPv2-TCMacAddress
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.10
aclCurCfgDstMACAddress
The destination MAC address to be filtered.
SNMPv2-TCMacAddress
Constraints:
range: 0-7
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.11
aclCurCfgDstMACMask
The address mask applied to aclCurCfgDstMACAddress for filtering.
SNMPv2-TCMacAddress
Constraints:
range: 0-63
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.12
aclCurCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.13
aclCurCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.14
aclCurCfgVLanId
The virtual LAN identifier to be filtered.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.15
aclCurCfgVLanMask
The mask applied to aclCurCfgVLanId for filtering.
SNMPv2-TCDisplayString
Enumerated Values:
0disable
1enable
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.16
aclCurCfg8021pPriority
The 802.1p priority to be filtered.
Enumeration
Constraints:
range: 0-4094
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.17
aclCurCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.18
aclCurCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.19
aclCurCfgSrcIPAddress
The source IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.20
aclCurCfgSrcIPMask
The address mask applied to aclCurCfgSrcIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.21
aclCurCfgDstIPAddress
The destination IP address to be filtered.
SNMPv2-SMIIpAddress
Enumerated Values:
0none
1permit
2deny
3setprio
5changevlan
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.22
aclCurCfgDstIPMask
The address mask applied to aclCurCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddress
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.23
aclCurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.24
aclCurCfgSrcPortMask
The mask applied to aclCurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.25
aclCurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.26
aclCurCfgDstPortMask
The mask applied to aclCurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.27
aclCurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.28
aclCurCfgStatistics
Whether statistics collection for this ACL is enabled or not.
Enumeration
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.30
aclCurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Constraints:
range: 0-4095
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.39
aclCurCfgMeterAction
Meter Action for this ACL.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.41
aclCurCfgMeterEnable
Meter state for this ACL.
Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.42
aclCurCfgKbitsSec
The commited rate of meter associated with this ACL entry.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.43
aclCurCfgKbitsBurst
The maxmium burst sizeof meter associated with this ACL entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.44
aclCurCfgUser
Set user defined priority for this ACL.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.45
aclCurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.46
aclCurCfgInprofDscpEnable
Whether in profile update DSCP for this ACL is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.50
aclCurCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.51
aclCurCfgMirrorPortIndex
Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.74
aclCurCfgLog
Whether log for this ACL is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.81
aclCurCfgFilterActionChangeVlan
The classified VLAN only if the action is set as changevlan
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.84
aclCurCfgMirrorPortAlias
The mirror port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.1.1.91

aclNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.1.2 · 1 row entry · 42 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclNewCfgTable' 
The table of new ACL configuration.
aclNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1
New information about a particular ACL configuration.
Indexes
No indexes recorded
Column Syntax OID
aclNewCfgIndex
The index associated with this ACL entry.
SNMPv2-SMIUnsigned32
Enumerated Values:
1other
2delete
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.1
aclNewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumerationr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.4
aclNewCfgFilterActionSetPrio
The COS queue to be used when the action for this ACL entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.5
aclNewCfgSrcMACAddress
The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Enumerated Values:
0enabled
1disabled
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.9
aclNewCfgSrcMACMask
The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Constraints:
range: 128-10000
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.10
aclNewCfgDstMACAddress
The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.11
aclNewCfgDstMACMask
The address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Constraints:
range: 0-7
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.12
aclNewCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.13
aclNewCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.14
aclNewCfgVLanId
The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan …
Integer32r/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.15
aclNewCfgVLanMask
The mask to be applied to aclNewCfgVLanId for filtering.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.16
aclNewCfg8021pPriority
The 802.1p priority to be filtered.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.17
aclNewCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.18
aclNewCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.19
aclNewCfgSrcIPAddress
The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.20
aclNewCfgSrcIPMask
The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
0disable
1enable
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.21
aclNewCfgDstIPAddress
The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.22
aclNewCfgDstIPMask
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.23
aclNewCfgSrcPort
The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.24
aclNewCfgSrcPortMask
The mask to be applied to aclNewCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.25
aclNewCfgDstPort
The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.26
aclNewCfgDstPortMask
The mask to be applied to aclNewCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-63
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.27
aclNewCfgTCPFlags
The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.28
aclNewCfgStatistics
Whether statistics collection for this ACL is enabled or not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.30
aclNewCfgDelete
This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.33
aclNewCfgTCPFlagsMask
The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.39
aclNewCfgMeterAction
Meter Action for this ACL.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.41
aclNewCfgMeterEnable
Meter state for this ACL.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.42
aclNewCfgMbitsSec
The commited rate of (multiple of 64) meter associated with this ACL entry.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.43
aclNewCfgKbitsBurst
The maximum burst size of the meter associated with this ACL entry.
Enumerationr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.44
aclNewCfgUser
Set user defined priority for this ACL.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.45
aclNewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.46
aclNewCfgInprofDscpEnable
Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting …
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.50
aclNewCfgOutprofDscpEnable
Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.51
aclNewCfgReset
This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.52
aclNewCfgEthernetReset
This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.53
aclNewCfgIpv4Reset
This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.54
aclNewCfgTcpudpReset
This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.55
aclNewCfgMirrorPortIndex
Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.74
aclNewCfgLog
Whether log for this ACL is enabled or not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.81
aclNewCfgFilterActionChangeVlan
The VLAN will be modified when the action for this ACL entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.84
aclNewCfgMirrorPortAlias
The mirror port alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.2.1.91

aclCurCfgRemarkOutProfDscpTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgRemarkOutProfDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclCurCfgRemarkOutProfDscpTable' 
The table of Dscp to out-profile DSCP configuration.
aclCurCfgRemarkOutProfDscpEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.1.3.1
Information about a particular Dscp to out profile DSCP configuration
Indexes
Column Syntax OID
aclCurCfgRemarkOutProfDscpIndex
Dscp value
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.1.1.3.1.1
aclCurCfgRemarkOutProfDscpMkdnDscp
Out Profile DSCP Dscp Value
Integer32
Enumerated Values:
0none
1permit
2deny
3setprio
5changevlan
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.3.1.2

aclNewCfgRemarkOutProfDscpTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgRemarkOutProfDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclNewCfgRemarkOutProfDscpTable' 
The table of Dscp to out-profile DSCP configuration.
aclNewCfgRemarkOutProfDscpEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.1.4.1
Information about a particular Dscp to out profile DSCP configuration
Indexes
No indexes recorded
Column Syntax OID
aclNewCfgRemarkOutProfDscpIndex
Dscp value
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.4.1.1
aclNewCfgRemarkOutProfDscpMkdnDscp
Out Profile DSCP Dscp Value
Integer32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.9.1.1.4.1.2

aclCurCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclCurCfgPortTable' 
The table of port acl groups configuration.
aclCurCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.4.1.1
Information about a particular port acl configuration.
Indexes
No indexes recorded
Column Syntax OID
aclCurCfgPortIndex
The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber .1.3.6.1.4.1.26543.2.7.4.9.1.4.1.1.1
aclCurCfgPortAclBmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString .1.3.6.1.4.1.26543.2.7.4.9.1.4.1.1.2
aclCurCfgPortAcl6Bmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.1.1.13
aclCurCfgPortAlias
The alias of a particular port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.1.1.14

aclNewCfgPortTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.4.2 · 1 row entry · 8 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk aclNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::aclNewCfgPortTable' 
The table of port acl configuration.
aclNewCfgPortTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1
Information about a particular port acl groups configuration.
Indexes
No indexes recorded
Column Syntax OID
aclNewCfgPortIndex
The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.1
aclNewCfgPortAddAcl
The acl to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.2
aclNewCfgPortRemoveAcl
The acl to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
0disable
1enable
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.5
aclNewCfgPortAclBmap
The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.8
aclNewCfgPortAddAcl6
The acl6 to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.11
aclNewCfgPortRemoveAcl6
The acl6 to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
0disable
1enable
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.12
aclNewCfgPortAcl6Bmap
The acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || …
OctetString
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.13
aclNewCfgPortAlias
The alias of a particular port.
SNMPv2-TCDisplayString
Constraints:
range: 0-4094
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.4.2.1.14

acl6CurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.5.1 · 1 row entry · 22 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6CurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::acl6CurCfgTable' 
The table of current ACL6 configuration.
acl6CurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1
Current information about a particular ACL6 configuration entry.
Indexes
Column Syntax OID
acl6CurCfgIndex
The index associated with this ACL6 entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.1
acl6CurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
5changevlan
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.3
acl6CurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this ACL6 entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.4
acl6CurCfgSrcIPv6Address
The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxx…
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.5
acl6CurCfgSrcIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.6
acl6CurCfgDstIPv6Address
The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.7
acl6CurCfgDstIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.8
acl6CurCfgIPv6FlowLabel
The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.9
acl6CurCfgIPv6TrafficClass
The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.10
acl6CurCfgIPv6NextHeader
The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.11
acl6CurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.12
acl6CurCfgSrcPortMask
The mask applied to acl6CurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.13
acl6CurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.14
acl6CurCfgDstPortMask
The mask applied to acl6CurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.15
acl6CurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.16
acl6CurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.17
acl6CurCfgStatistics
Whether statistics collection for this ACL6 is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.19
acl6CurCfgUser
Set user defined priority for this ACL6.
Integer32
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.20
acl6CurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.21
acl6CurCfgInprofDscpEnable
Whether in profile update DSCP for this ACL6 is enabled or not.
Enumeration
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.25
acl6CurCfgLog
Whether log for this ACL is enabled or not.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.26
acl6CurCfgFilterActionChangeVlan
The classified VLAN only if the action is set as changevlan
Integer32
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.1.1.27

acl6NewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.1.5.2 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk acl6NewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::acl6NewCfgTable' 
The table of new ACL6 configuration.
acl6NewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1
New information about a particular ACL6 configuration.
Indexes
No indexes recorded
Column Syntax OID
acl6NewCfgIndex
The index associated with this ACL6 entry.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.1
acl6NewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this ACL6 entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.3
acl6NewCfgFilterActionSetPrio
The COS queue to be used when the action for this ACL6 entry is
set to setprio.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.4
acl6NewCfgSrcIPv6Address
The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::x…
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.5
acl6NewCfgSrcIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
Integer32r/w
Enumerated Values:
0none
1permit
2deny
3setprio
5changevlan
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.6
acl6NewCfgDstIPv6Address
The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…
OctetStringr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.7
acl6NewCfgDstIPv6PrefixLen
The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
Integer32r/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.8
acl6NewCfgIPv6FlowLabel
The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1disabled
2any
3untagged
4tagged
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.9
acl6NewCfgIPv6TrafficClass
The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1none
2ipv4
3ipv6
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.10
acl6NewCfgIPv6NextHeader
The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.11
acl6NewCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.12
acl6NewCfgSrcPortMask
The mask applied to acl6CurCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.13
acl6NewCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.14
acl6NewCfgDstPortMask
The mask applied to acl6CurCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.15
acl6NewCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bitsr/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.16
acl6NewCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bitsr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.17
acl6NewCfgStatistics
Whether statistics collection for this ACL6 is enabled or not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.19
acl6NewCfgDelete
This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.22
acl6NewCfgUser
Set user defined priority for this ACL6.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.23
acl6NewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.24
acl6NewCfgInprofDscpEnable
Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when settin…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.28
acl6NewCfgIPv6Reset
This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.30
acl6NewCfgTcpudpReset
This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.31
acl6NewCfgLog
Whether log for this ACL is enabled or not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.33
acl6NewCfgFilterActionChangeVlan
The VLAN will be modified when the action for this ACL6 entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.26543.2.7.4.9.1.5.2.1.34

vmapCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.1.1 · 1 row entry · 42 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapCurCfgTable' 
The table of current VMAP configuration.
vmapCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1
Current information about a particular VMAP configuration entry.
Indexes
No indexes recorded
Column Syntax OID
vmapCurCfgIndex
The index associated with this VMAP entry.
SNMPv2-SMIUnsigned32
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.1
vmapCurCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.2
vmapCurCfgFilterActionSetPrio
The value to be used when the action to be performed is setprio
for this VMAP entry.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.3
vmapCurCfgEthFmt
The packet ethernet format to be filtered.
Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.4
vmapCurCfgTagFmt
The packet tag format to be filtered.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.5
vmapCurCfgIPFmt
The packet IP format to be filtered.
Enumeration
Constraints:
range: 64-10000000
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.6
vmapCurCfgSrcMACAddress
The source MAC address to be filtered.
SNMPv2-TCMacAddress
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.7
vmapCurCfgSrcMACMask
The address mask applied to aclCurCfgSrcMACAddress for filtering.
SNMPv2-TCMacAddress
Constraints:
range: 0-7
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.8
vmapCurCfgDstMACAddress
The destination MAC address to be filtered.
SNMPv2-TCMacAddress
Constraints:
range: 0-63
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.9
vmapCurCfgDstMACMask
The address mask applied to aclCurCfgDstMACAddress for filtering.
SNMPv2-TCMacAddress
Enumerated Values:
0disable
1enable
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.10
vmapCurCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.11
vmapCurCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Enumerated Values:
0disabled
1userdefined
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.12
vmapCurCfg8021pPriority
The 802.1p priority to be filtered.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.13
vmapCurCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Enumerated Values:
0disable
1enable
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.14
vmapCurCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.15
vmapCurCfgSrcIPAddress
The source IP address to be filtered.
SNMPv2-SMIIpAddress
Constraints:
range: 0-4094
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.16
vmapCurCfgSrcIPMask
The address mask applied to aclCurCfgSrcIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.17
vmapCurCfgDstIPAddress
The destination IP address to be filtered.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.18
vmapCurCfgDstIPMask
The address mask applied to aclCurCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.19
vmapCurCfgSrcPort
The source TCP/UDP port number to be filtered.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.20
vmapCurCfgSrcPortMask
The mask applied to aclCurCfgSrcPort for filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.21
vmapCurCfgDstPort
The destination TCP/UDP port number to be filtered.
Integer32
Enumerated Values:
0none
1permit
2deny
3setprio
5changevlan
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.22
vmapCurCfgDstPortMask
The mask applied to aclCurCfgDstPort for filtering.
SNMPv2-TCDisplayString
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.23
vmapCurCfgTCPFlags
The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0none
1ethernet2
2snap
3llc
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.24
vmapCurCfgTCPFlagsMask
The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
1disabled
2any
3none
4tagged
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.25
vmapCurCfgEgressPorts
The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString
Enumerated Values:
1none
2ipv4
3ipv6
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.26
vmapCurCfgStatistics
Whether statistics collection for this VMAP is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.27
vmapCurCfgMeterAction
Meter Action for this VMAP.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.31
vmapCurCfgMeterEnable
Meter state for this VMAP.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.32
vmapCurCfgKbitsSec
The commited rate of meter associated with this VMAP entry.
Unsigned32 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.33
vmapCurCfgKbitsBurst
The maxmium burst sizeof meter associated with this VMAP entry.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.34
vmapCurCfgUser
Set user defined priority for this VMAP.
Integer32
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.35
vmapCurCfgInprofDscp
Set in profile pkts DSCP value.
Integer32
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.36
vmapCurCfgTos
To enable/disable setting pkts based on TOS bits.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.37
vmapCurCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.38
vmapCurCfgUserEnable
Set update method for this VMAP.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.39
vmapCurCfgInprofDscpEnable
Whether in profile update DSCP for this VMAP is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.40
vmapCurCfgOutprofDscpEnable
Whether out profile update DSCP for this VMAP is enabled or not.
Enumeration .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.41
vmapCurCfgMirrorPort
Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.51
vmapCurCfgFilterActionChangeVlan
The classified VLAN only if the action is set as changevlan
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.52
vmapCurCfgEgressPortAlias
The port alias in the VMAP configured for egress filtering
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.53
vmapCurCfgMirrorPortAlias
Set port in the VMAP for mirroring using it's alias.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.54

vmapNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.1.2 · 1 row entry · 56 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapNewCfgTable' 
The table of new VMAP configuration.
vmapNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1
New information about a particular VMAP configuration.
Indexes
No indexes recorded
Column Syntax OID
vmapNewCfgIndex
The index associated with this VMAP entry.
SNMPv2-SMIUnsigned32
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.1
vmapNewCfgFilterAction
The action to be performed on a packet that matches the filter
settings of this VMAP entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.2
vmapNewCfgFilterActionSetPrio
The COS queue to be used when the action for this VMAP entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.3
vmapNewCfgEthFmt
The packet ethernet format to be filtered.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.4
vmapNewCfgTagFmt
The packet tagging format to be filtered.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.5
vmapNewCfgIPFmt
The packet IP format to be filtered.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.6
vmapNewCfgSrcMACAddress
The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.7
vmapNewCfgSrcMACMask
The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Enumerated Values:
0enabled
1disabled
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.8
vmapNewCfgDstMACAddress
The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Constraints:
range: 64-10000000
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.9
vmapNewCfgDstMACMask
The address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.10
vmapNewCfgEthernetTypeName
The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.11
vmapNewCfgEthernetTypeValue
The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.12
vmapNewCfg8021pPriority
The 802.1p priority to be filtered.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.13
vmapNewCfgTypeOfService
The type of service to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-63
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.14
vmapNewCfgProtocol
The protocol to be filtered.
'none' for not initialised, within the
range 0-255
SNMPv2-TCDisplayStringr/w
Enumerated Values:
0disabled
1userdefined
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.15
vmapNewCfgSrcIPAddress
The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
0disable
1enable
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.16
vmapNewCfgSrcIPMask
The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
0disable
1enable
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.17
vmapNewCfgDstIPAddress
The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.18
vmapNewCfgDstIPMask
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 4
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.19
vmapNewCfgSrcPort
The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.20
vmapNewCfgSrcPortMask
The mask to be applied to aclNewCfgSrcPort for filtering.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.21
vmapNewCfgDstPort
The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.22
vmapNewCfgDstPortMask
The mask to be applied to aclNewCfgDstPort for filtering.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1other
2reset
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.23
vmapNewCfgTCPFlags
The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.24
vmapNewCfgTCPFlagsMask
The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.25
vmapNewCfgEgressPorts
The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.26
vmapNewCfgStatistics
Whether statistics collection for this VMAP is enabled or not.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.27
vmapNewCfgAddEgressPort
The port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.28
vmapNewCfgRemoveEgressPort
The port to be removed from the specified VMAP. A value of zero
is always returned when this object is read.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.29
vmapNewCfgDelete
This is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.30
vmapNewCfgMeterAction
Meter Action for this VMAP.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.31
vmapNewCfgMeterEnable
Meter state for this VMAP.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.32
vmapNewCfgKbitsSec
The commited rate of meter associated with this VMAP entry.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.33
vmapNewCfgKbitsBurst
The maximum burst size of the meter associated with this VMAP entry.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.34
vmapNewCfgUser
Set user defined priority for this VMAP.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.35
vmapNewCfgInprofDscp
Set in profile pkts DSCP value.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.36
vmapNewCfgTos
To enable/disable setting pkts based on TOS bits.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.37
vmapNewCfgOutprofDscp
Set out profile pkts DSCP value.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.38
vmapNewCfgUserEnable
Set update method for this VMAP.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.39
vmapNewCfgInprofDscpEnable
Whether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when settin…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.40
vmapNewCfgOutprofDscpEnable
Whether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when sett…
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.41
vmapNewCfgReset
This is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.42
vmapNewCfgEthernetReset
This is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.43
vmapNewCfgIpv4Reset
This is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.44
vmapNewCfgTcpudpReset
This is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.45
vmapNewCfgMeterReset
This is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.46
vmapNewCfgRemarkReset
This is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.47
vmapNewCfgRemarkInprofReset
This is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.48
vmapNewCfgRemarkOutprofReset
This is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.49
vmapNewCfgPktfmtReset
This is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.50
vmapNewCfgMirrorPort
Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.51
vmapNewCfgFilterActionChangeVlan
The VLAN will be modified when the action for this VMAP entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.52
vmapNewCfgEgressPortAliases
The port alias in the VMAP configured for egress filtering.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.53
vmapNewCfgMirrorPortAlias
Set port in the VMAP for mirroring using it's alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.54
vmapNewCfgAddEgressPortAlias
The port to be added using it's alias to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.55
vmapNewCfgRemoveEgressPortAlias
The port to be removed using it's alias from the specified VMAP. A value of zero
is always returned when this object is read.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.56

vmapVlanCurCfgNonServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanCurCfgNonServerPortsTable' 
The table of the current configuration
of vmaps for the non-server ports of vlans.
vmapVlanCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgNonServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.1.1.1
vmapVlanCurCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.1.1.2

vmapVlanNewCfgNonServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanNewCfgNonServerPortsTable' 
The table of the new configuration
of vmaps for non-server ports of vlans.
vmapVlanNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vlans.
Indexes
No indexes recorded
Column Syntax OID
vmapVlanNewCfgNonServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the non-server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2.1.1
vmapVlanNewCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2.1.2
vmapVlanNewCfgNonServerPortsAddVmap
Add a new vmap to the non-server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2.1.3
vmapVlanNewCfgNonServerPortsRemVmap
Remove a vmap from the non-server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.1.2.1.4

vmapVlanCurCfgServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanCurCfgServerPortsTable' 
The table of the current configuration
of vmaps for server ports of vlans.
vmapVlanCurCfgServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.1.1.1
vmapVlanCurCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.1.1.2

vmapVlanNewCfgServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanNewCfgServerPortsTable' 
The table of the new configuration
of vmaps for server ports of vlans.
vmapVlanNewCfgServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vlans.
Indexes
No indexes recorded
Column Syntax OID
vmapVlanNewCfgServerPortsVlanIdx
The vlan id in the table of configured
vmaps for the server ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2.1.1
vmapVlanNewCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2.1.2
vmapVlanNewCfgServerPortsAddVmap
Add a new vmap to the server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2.1.3
vmapVlanNewCfgServerPortsRemVmap
Remove a vmap from the server ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.2.2.1.4

vmapVlanCurCfgAllPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanCurCfgAllPortsTable' 
The table of the current configuration
of vmaps for all ports of vlans.
vmapVlanCurCfgAllPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.1.1
A row in the table of current configuration
of vmaps for all ports of vlans.
Indexes
Column Syntax OID
vmapVlanCurCfgAllPortsVlanIdx
The vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.1.1.1
vmapVlanCurCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.1.1.2

vmapVlanNewCfgAllPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapVlanNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapVlanNewCfgAllPortsTable' 
The table of the new configuration
of vmaps for all ports of vlans.
vmapVlanNewCfgAllPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2.1
A row in the table of new configuration
of vmaps for all ports of vlans.
Indexes
No indexes recorded
Column Syntax OID
vmapVlanNewCfgAllPortsVlanIdx
The vlan id in the table of configured
vmaps for all ports of vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2.1.1
vmapVlanNewCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2.1.2
vmapVlanNewCfgAllPortsAddVmap
Add a new vmap to all ports of the vlan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2.1.3
vmapVlanNewCfgAllPortsRemVmap
Remove a vmap from all vlan ports
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.1.3.2.1.4

vmapGroupCurCfgNonServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupCurCfgNonServerPortsTable' 
The table of the current configuration
of vmaps for non-server ports of vm groups.
vmapGroupCurCfgNonServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.1.1
A row in the table of current configuration
of vmaps for the non-server ports of vm groups.
Indexes
Column Syntax OID
vmapGroupCurCfgNonServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.1.1.1
vmapGroupCurCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.1.1.2

vmapGroupNewCfgNonServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgNonServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupNewCfgNonServerPortsTable' 
The table of the new configuration
of vmaps for non-server ports of vm groups.
vmapGroupNewCfgNonServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2.1
A row in the table of new configuration
of vmaps for the non-server ports of vm groups.
Indexes
No indexes recorded
Column Syntax OID
vmapGroupNewCfgNonServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the non-server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2.1.1
vmapGroupNewCfgNonServerPortsVmapBitmap
The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2.1.2
vmapGroupNewCfgNonServerPortsAddVmap
Add a new vmap to the non-server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2.1.3
vmapGroupNewCfgNonServerPortsRemVmap
Remove a vmap from the non-server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
0auto
1on
2off
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.1.2.1.4

vmapGroupCurCfgServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupCurCfgServerPortsTable' 
The table of the current configuration
of vmaps for server ports of vm groups.
vmapGroupCurCfgServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.1.1
A row in the table of current configuration
of vmaps for the server ports of vm groups.
Indexes
No indexes recorded
Column Syntax OID
vmapGroupCurCfgServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.1.1.1
vmapGroupCurCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.1.1.2

vmapGroupNewCfgServerPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgServerPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupNewCfgServerPortsTable' 
The table of the new configuration
of vmaps for server ports of vm groups.
vmapGroupNewCfgServerPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2.1
A row in the table of new configuration
of vmaps for the server ports of vm groups.
Indexes
No indexes recorded
Column Syntax OID
vmapGroupNewCfgServerPortsGroupIdx
The vm group id in the table of configured
vmaps for the server ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2.1.1
vmapGroupNewCfgServerPortsVmapBitmap
The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2.1.2
vmapGroupNewCfgServerPortsAddVmap
Add a new vmap to the server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2.1.3
vmapGroupNewCfgServerPortsRemVmap
Remove a vmap from the server ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.2.2.1.4

vmapGroupCurCfgAllPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupCurCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupCurCfgAllPortsTable' 
The table of the current configuration
of vmaps for all ports of vm groups.
vmapGroupCurCfgAllPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.1.1
A row in the table of current configuration
of vmaps for all ports of vm groups.
Indexes
No indexes recorded
Column Syntax OID
vmapGroupCurCfgAllPortsGroupIdx
The vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.1.1.1
vmapGroupCurCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.1.1.2

vmapGroupNewCfgAllPortsTable

table
.1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmapGroupNewCfgAllPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmapGroupNewCfgAllPortsTable' 
The table of the new configuration
of vmaps for all ports of vm groups.
vmapGroupNewCfgAllPortsTableEntry row .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2.1
A row in the table of new configuration
of vmaps for all ports of vm groups.
Indexes
No indexes recorded
Column Syntax OID
vmapGroupNewCfgAllPortsGroupIdx
The vm group id in the table of configured
vmaps for all ports of vm group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2.1.1
vmapGroupNewCfgAllPortsVmapBitmap
The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...…
OctetString .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2.1.2
vmapGroupNewCfgAllPortsAddVmap
Add a new vmap to all ports of the vm group
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2.1.3
vmapGroupNewCfgAllPortsRemVmap
Remove a vmap from all vm group ports
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.9.3.2.2.3.2.1.4

fipsPortCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.14.1.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsPortCurCfgTable' 
The table of FIP Snooping port current config.
fipsPortCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.14.1.3.7.1
FIP Config for a particular port.
Indexes
No indexes recorded
Column Syntax OID
fipsPortCurCfgIndex
The port number
PortNumber
Constraints:
range: 0-31
 .1.3.6.1.4.1.26543.2.7.4.14.1.3.7.1.1
fipsPortCurCfgFcfMode
Weither the port is set to have FCF auto detection, on, or off.
Enumeration .1.3.6.1.4.1.26543.2.7.4.14.1.3.7.1.2
fipsPortCurCfgFipsEna
FIP snooping enabled or disabled on this port.
Enumeration .1.3.6.1.4.1.26543.2.7.4.14.1.3.7.1.3

fipsPortNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.14.1.3.8 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsPortNewCfgTable' 
The table of FIP Snooping port new config.
fipsPortNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.14.1.3.8.1
FIP Config for a particular port.
Indexes
No indexes recorded
Column Syntax OID
fipsPortNewCfgIndex
The port number
PortNumber .1.3.6.1.4.1.26543.2.7.4.14.1.3.8.1.1
fipsPortNewCfgFcfMode
Set this port to have FCF on, off, or auto detection.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.14.1.3.8.1.2
fipsPortNewCfgFipsEna
Enable or disable FIP snooping on this port.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.14.1.3.8.1.3

fcoeStatsTable

table
.1.3.6.1.4.1.26543.2.7.4.14.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fcoeStatsTable' 
The table of fcoe statistics per switch unit.
fcoeStatsEntry row .1.3.6.1.4.1.26543.2.7.4.14.2.1.1
A switch unit.
Indexes
Column Syntax OID
fcoeStatsIndex
The switch index for fips statistics
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.2.1.1.1
fcoeStatsFcfAdded
The number of FCF added to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.2.1.1.2
fcoeStatsFcfRemoved
The number of FCF removed to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.2.1.1.3
fcoeStatsFcoeAdded
The number of FCOE connection added to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.2.1.1.4
fcoeStatsFcoeRemoved
The number of FCOE connection removed to the FCOE database.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.2.1.1.5

fcoeStatsKeepAliveTable

table
.1.3.6.1.4.1.26543.2.7.4.14.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fcoeStatsKeepAliveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fcoeStatsKeepAliveTable' 
The table of fcoe Keep-Alive statistics.
fcoeStatsKeepAliveEntry row .1.3.6.1.4.1.26543.2.7.4.14.2.2.1
A FCF Keep Alive entry.
Indexes
Column Syntax OID
fcoeStatsKeepAliveIndex
The FCF index
SNMPv2-SMIInteger32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.26543.2.7.4.14.2.2.1.1
fcoeStatsKeepAliveFcfMac
Detected FCF MAC address.
SNMPv2-TCDisplayString
Constraints:
range: 0-8
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.2.2.1.2
fcoeStatsKeepAliveCount
FCF MAC Keep Alive count.
SNMPv2-SMIInteger32
Constraints:
range: 0-32
 .1.3.6.1.4.1.26543.2.7.4.14.2.2.1.3

fipsInfoPortTable

table
.1.3.6.1.4.1.26543.2.7.4.14.3.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsInfoPortTable' 
The table of fips port run-time information.
fipsInfoPortEntry row .1.3.6.1.4.1.26543.2.7.4.14.3.1.1.1
A port in the fips information table.
Indexes
No indexes recorded
Column Syntax OID
fipsInfoPortIndex
The port index for fips
PortNumber .1.3.6.1.4.1.26543.2.7.4.14.3.1.1.1.1
fipsInfoAclSequencer
The fip sequence number for an acl in this port
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.1.1.2
fipsInfoAcl
An FIPS ACL entry
OctetString .1.3.6.1.4.1.26543.2.7.4.14.3.1.1.1.3
fipsInfoPortAlias
The port alias for fips
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.1.1.4

fipsInfoFcfTable

table
.1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsInfoFcfTable' 
The table of fips FCF detected.
fipsInfoFcfEntry row .1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2.1
A FCF in the fips information table.
Indexes
No indexes recorded
Column Syntax OID
fipsInfoFcfIndex
FCF index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2.1.1
fipsInfoFcfMac
FCF MAC
SNMPv2-TCDisplayString
Constraints:
range: 0-40
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2.1.2
fipsInfoFcfPort
FCF Port/Trunk alias
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2.1.3
fipsInfoFcfVlan
FCF Vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.2.2.1.4

fipsInfoFcoeTable

table
.1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoFcoeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsInfoFcoeTable' 
The table of fips FCOE connections.
fipsInfoFcoeEntry row .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1
A FCOE connection in the fips information table.
Indexes
No indexes recorded
Column Syntax OID
fipsInfoFcoeIndex
FCOE connection index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1.1
fipsInfoFcoeVNPortMac
FCOE connection VNPort MAC
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1.2
fipsInfoFcoeFcfMac
FCOE connection FCF MAC
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1.3
fipsInfoFcoePort
FCOE connection Port/Trunk Alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1.4
fipsInfoFcoeVlan
FCOE connection Vlan
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.3.2.1.5

fipsInfoVlansTable

table
.1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fipsInfoVlansTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::fipsInfoVlansTable' 
The table of FCOE VLANs detected.
fipsInfoVlansEntry row .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1
A FCOE VLAN in the fipsInfoVlans information table.
Indexes
No indexes recorded
Column Syntax OID
fipsInfoVlansId
FCoE Vlan index
Integer32 .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1.1
fipsInfoVlansFeatureIndex
FCoE Vlan feature index. The feature index will accept values
from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and
0 for the other types of VLANs.
Integer32 .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1.2
fipsInfoVlansCreator
The FCoE VLAN Creator.
OctetString .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1.3
fipsInfoVlansPorts
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| |…
OctetString
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1.4
fipsInfoVlansTrunks
The FCoE VLAN trunk list.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.14.3.1.4.1.1.5

vmCurCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.15.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmCurCfgGroupTable' 
The table of VM groups in the current config
vmCurCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.15.2.1.1
Information about VM on a group in current config.
Indexes
No indexes recorded
Column Syntax OID
vmCurCfgGroupIndex
The index of the vm group table.
SNMPv2-SMIInteger32
Enumerated Values:
1remove
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.1
vmCurCfgGroupVlan
Current Vlan used by the group.
SNMPv2-SMIInteger32
Constraints:
range: 0-40
 .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.2
vmCurCfgGroupPorts
The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString
Enumerated Values:
1delete
 .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.3
vmCurCfgGroupTagState
Enable VLAN tagging on all VM group ports.
Enumeration .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.4
vmCurCfgGroupStg
Current stg of the group vlan.
SNMPv2-SMIInteger32
Enumerated Values:
0noValidation
1basicCheck
2advancedCheck
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.5
vmCurCfgGroupProfileName
Current profile name used by the group.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.17
vmCurCfgGroupValidateMode
Current validation mode used by the group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.1.1.18

vmNewCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.15.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmNewCfgGroupTable' 
The table of VM groups in the new config
vmNewCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.15.2.2.1
Information about VM on a group in new config.
Indexes
Column Syntax OID
vmNewCfgGroupIndex
The index of the vm group table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.1
vmNewCfgGroupVlan
Set Vlan to be used by the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.2
vmNewCfgGroupPorts
The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.3
vmNewCfgGroupAddVm
Add a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.4
vmNewCfgGroupRemVm
Remove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.5
vmNewCfgGroupAddVmIdx
Add virtual MAC address by index to the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.6
vmNewCfgGroupRemVmIdx
Remove a virtual MAC address by index from the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.7
vmNewCfgGroupAddPortIdx
Add a port to the group.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.8
vmNewCfgGroupRemPortIdx
Remove a port from the group.
PortNumberr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.9
vmNewCfgGroupAddTrunk
Add trunk to the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.10
vmNewCfgGroupRemTrunk
Remove trunk from the group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.11
vmNewCfgGroupTagState
Enable VLAN tagging on all VM group ports.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.12
vmNewCfgGroupAddLacpKey
Add LACP trunk to the group.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.13
vmNewCfgGroupRemLacpKey
Remove LACP trunk from the group.
Unsigned32r/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.14
vmNewCfgGroupAddProfile
Add VM Profile to the group.
OctetStringr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.15
vmNewCfgGroupRemProfile
Remove any VM profile associated with the group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.16
vmNewCfgGroupProfileName
New profile name to be used by the group.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.17
vmNewCfgGroupDelete
Delete VM Group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.18
vmNewCfgGroupStg
Set group vlan spanning tree group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.19
vmNewCfgGroupValidateMode
Set group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.20
vmNewCfgGroupAddPortAlias
Add a port to the group, using it's alias.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.24
vmNewCfgGroupRemPortAlias
Remove a port from the group, using it's alias.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.2.2.1.25

vmCurCfgGroupMacTable

table
.1.3.6.1.4.1.26543.2.7.4.15.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmCurCfgGroupMacTable' 
Virtual machine group current configuration table.
vmCurCfgGroupMaclistEntry row .1.3.6.1.4.1.26543.2.7.4.15.2.3.1
Information about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index
Indexes
No indexes recorded
Column Syntax OID
vmCurCfgGroupMacGroupIndex
The group number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.2.3.1.1
vmCurCfgGroupMacVMIndex
The virtual machine number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.2.3.1.2
vmCurCfgGroupMacVMMac
virtual machine MAC address.
SNMPv2-TCPhysAddress
Constraints:
range: 0-40
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.15.2.3.1.3

vmNewCfgGroupMacTable

table
.1.3.6.1.4.1.26543.2.7.4.15.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgGroupMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmNewCfgGroupMacTable' 
virtual machine group new configuration table.
vmNewCfgGroupMaclistEntry row .1.3.6.1.4.1.26543.2.7.4.15.2.4.1
Information about virtual machine group
Indexes
No indexes recorded
Column Syntax OID
vmNewCfgGroupMacGroupIndex
The group number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.2.4.1.1
vmNewCfgGroupMacVMIndex
The virtual machine number for which the info is related.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.2.4.1.2
vmNewCfgGroupMacVMMac
The virtual machine MAC address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.15.2.4.1.3

vmbwCurCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.15.3.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmbwCurCfgTable' 
The table of current VM Bandwidth configuration.
vmbwCurCfgEntry row .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1
A row in the current VM bandwidth table.
Indexes
No indexes recorded
Column Syntax OID
vmbwCurCfgMac
MAC address of VM for which bandwidth control information is related.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1.1
vmbwCurCfgTxRate
VM transmit bandwidth committed rate in kbps (ingress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1.2
vmbwCurCfgTxBurst
VM transmit bandwidth max burst size in kilobits (ingress for switch).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1.3
vmbwCurCfgTxAclId
ACL used for VM transmit bandwidth.
SNMPv2-SMIUnsigned32
Constraints:
range: 1-39
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1.4
vmbwCurCfgCtrl
Enable/Disable VM bandwidth control entry.
Enumeration .1.3.6.1.4.1.26543.2.7.4.15.3.1.1.1.7

vmbwNewCfgTable

table
.1.3.6.1.4.1.26543.2.7.4.15.3.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmbwNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmbwNewCfgTable' 
The table of new VM Bandwidth configuration.
vmbwNewCfgEntry row .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1
A row in the new VM bandwidth table.
Indexes
No indexes recorded
Column Syntax OID
vmbwNewCfgMac
MAC address of VM for which bandwidth control information is related.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.1
vmbwNewCfgTxRate
VM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
1none
2delete
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.2
vmbwNewCfgTxBurst
VM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.3
vmbwNewCfgTxAclId
ACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.4
vmbwNewCfgCtrl
VM bandwidth control entry status
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.7
vmbwNewCfgDelete
This is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2).
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.3.1.2.1.8

vmCurCfgProfilesTable

table
.1.3.6.1.4.1.26543.2.7.4.15.4.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmCurCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmCurCfgProfilesTable' 
The table of VM profiles in the current config
vmCurCfgProfileEntry row .1.3.6.1.4.1.26543.2.7.4.15.4.1.1
Information about a VM profile in current config.
Indexes
No indexes recorded
Column Syntax OID
vmCurCfgProfileIndex
The index of the vm profiles table (1..32).
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.1
vmCurCfgProfileName
VM Profile name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.2
vmCurCfgProfileVlan
Current VM Profile VLAN Id
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.3
vmCurCfgProfileShapingAverage
Current VM Profile Shaping Average.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.4
vmCurCfgProfileShapingBurst
Current VM Profile Shaping Burst.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.5
vmCurCfgProfileShapingPeak
Current VM Profile Shaping Peak.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.6
vmCurCfgProfileEgressShapingAverage
Current VM Profile Egress Shaping Average.
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.7
vmCurCfgProfileEgressShapingBurst
Current VM Profile Egress Shaping Burst.
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.8
vmCurCfgProfileEgressShapingPeak
Current VM Profile Egress Shaping Peak.
SNMPv2-SMIInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.26543.2.7.4.15.4.1.1.9

vmNewCfgProfilesTable

table
.1.3.6.1.4.1.26543.2.7.4.15.4.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmNewCfgProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmNewCfgProfilesTable' 
The table of VM profiles in the current config
vmNewCfgProfileEntry row .1.3.6.1.4.1.26543.2.7.4.15.4.2.1
Information about a VM profile in current config.
Indexes
No indexes recorded
Column Syntax OID
vmNewCfgProfileIndex
The index of the vm profiles table (1..32).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.1
vmNewCfgProfileName
VM Profile name.
OctetStringr/w .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.2
vmNewCfgProfileVlan
Vlan to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.3
vmNewCfgProfileShapingAverage
Shaping average to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.4
vmNewCfgProfileShapingBurst
Shaping burst to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.5
vmNewCfgProfileShapingPeak
Shaping peak to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.6
vmNewCfgProfileDelete
Delete VM Profile.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.7
vmNewCfgProfileEgressShapingAverage
Egress shaping average to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.8
vmNewCfgProfileEgressShapingBurst
Egress shaping burst to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.9
vmNewCfgProfileEgressShapingPeak
Egress shaping peak to be used by the VM profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.4.2.1.10

virtVMwareHostNameTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareHostNameTable' 
The table of names of VMware hosts in the Virtual Center.
virtVMwareHostNameEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.2.1
Information about names of VMware hosts in the Data Center.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareHostNameIndex
The index of the virtVMwareHostNameTable table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.2.1.1
virtVMwareHostNameUUID
The UUID of a VMware host.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.2.1.2
virtVMwareHostNameIpAddress
The IP address of a VMware host.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.2.1.3
virtVMwareHostNameName
The name of a VMware host.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.2.1.4

virtVMwareVMNameTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareVMNameTable' 
The table of VMware virtual machines in the Data Center.
virtVMwareVMNameEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.3.1
Information about VMware virtual machines in the Data Center.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareVMNameIndex
The index of the VMware virtual machine table in the Data Center.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.3.1.1
virtVMwareVMNameUUID
The UUID of a virtual machine.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.3.1.2
virtVMwareVMNameVMwareName
The name of a virtual machine given by VMware.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.3.1.3
virtVMwareVMNameOsName
The name of a virtual machine given by the host OS.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.3.1.4
virtVMwareVMNameIpAddress
The IP address of a virtual machine.
OctetString .1.3.6.1.4.1.26543.2.7.4.15.5.3.1.5

virtVMwareHostVswitchTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.5 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostVswitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareHostVswitchTable' 
The table of Vswitches available on the specified host.
virtVMwareHostVswitchEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.5.1
Information about Vswitches available on the specified host.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareHostVswitchIndex
The index of the Vswitch table on the specified host.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.5.1.1
virtVMwareHostVswitchName
The name of a Vswitch on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.5.1.2

virtVMwareHostPGTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.6 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostPGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareHostPGTable' 
The table of Port Groups available on the specified host.
virtVMwareHostPGEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.6.1
Information about Port Groups available on the specified host.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareHostPGIndex
The index of the Port Group table on the specified host.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.6.1.1
virtVMwareHostPGName
The name of a Port Group on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.6.1.2
virtVMwareHostPGVswitchName
The name of a Vswitch on the specified host.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.6.1.3

virtVMwareHostDetailInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.7 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareHostDetailInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareHostDetailInfoTable' 
The table of detailed information available on the specified 
host/VM interface.
virtVMwareHostDetailInfoEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.7.1
Detailed information available on the specified host/VM interface.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareHostDetailInfoIndex
The index of the detailed information table on the specified
host/VM interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.1
virtVMwareHostDetailInfoMACAddr
The MAC address of the host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.2
virtVMwareHostDetailInfoPortIdx
The port number of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.3
virtVMwareHostDetailInfoType
Interface type
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.4
virtVMwareHostDetailInfoIPAddr
The IP address of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.5
virtVMwareHostDetailInfoUUID
The UUID of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.6
virtVMwareHostDetailInfoVswitch
The name of the virtual switch of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.7
virtVMwareHostDetailInfoPortGroup
The name of the port group of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.8
virtVMwareHostDetailInfoVlanID
The VLAN ID of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.9
virtVMwareHostDetailInfoHostName
The name of the specified host interface.
N/A for VMs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.10
virtVMwareHostDetailInfoVMVCenterName
The name of the Virtual Center of the specified VM interface.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.11
virtVMwareHostDetailInfoVMOSHostName
The name of the VM set by the host operating system.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.12
virtVMwareHostDetailInfoVMCurrentHost
The name of the host of the specified VM.
N/A for host interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.13
virtVMwareHostDetailInfoPortAlias
The port alias of the specified host/VM interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.7.1.14

virtVMwareVMInfoTable

table
.1.3.6.1.4.1.26543.2.7.4.15.5.9 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk virtVMwareVMInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::virtVMwareVMInfoTable' 
The table of networking information available on the 
specified VM.
virtVMwareVMInfoEntry row .1.3.6.1.4.1.26543.2.7.4.15.5.9.1
Detailed information available on the specified VM.
Indexes
No indexes recorded
Column Syntax OID
virtVMwareVMInfoIndex
The index of the table with information on the
specified VM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.1
virtVMwareVMInfoMACAddr
The MAC address of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.2
virtVMwareVMInfoPortAlias
The port alias of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.3
virtVMwareVMInfoType
Interface type
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.4
virtVMwareVMInfoIPAddr
The IP address of the specified VM.
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.5
virtVMwareVMInfoUUID
The UUID of the specified VM.
SNMPv2-TCDisplayString
Constraints:
range: 1-100
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.6
virtVMwareVMInfoVswitch
The name of the virtual switch of the specified VM.
SNMPv2-TCDisplayString
Enumerated Values:
1default
2fcoe
3iscsi
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.7
virtVMwareVMInfoPortGroup
The name of the port group of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.8
virtVMwareVMInfoVlanID
The VLAN ID of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.9
virtVMwareVMInfoVMVCenterName
The name of the Virtual Center of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.10
virtVMwareVMInfoVMOSHostName
The name of the VM set by the host operating system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.11
virtVMwareVMInfoVMCurrentHost
The name of the host of the specified VM.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.12
virtVMwareVMInfoPortIdx
The port number of the specified VM.
PortNumber
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.15.5.9.1.13

vmReadyCurCfgOuiTbl

table
.1.3.6.1.4.1.26543.2.7.4.15.8.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyCurCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmReadyCurCfgOuiTbl' 
The table of current VM Ready OUI configuration.
vmReadyCurCfgOuiEntry row .1.3.6.1.4.1.26543.2.7.4.15.8.2.1
A row in the current VM Ready OUI table.
Indexes
No indexes recorded
Column Syntax OID
vmReadyCurCfgOuiMacIdx
OUI of locally administred MAC address
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.8.2.1.1
vmReadyCurCfgOuiMac
OUI of locally administred MAC address
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.2.7.4.15.8.2.1.2
vmReadyCurCfgVendor
Vendor name of the OUI locally administred
SNMPv2-TCDisplayString
Enumerated Values:
1enabled
2disabled
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.8.2.1.3

vmReadyNewCfgOuiTbl

table
.1.3.6.1.4.1.26543.2.7.4.15.8.3 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vmReadyNewCfgOuiTbl
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vmReadyNewCfgOuiTbl' 
The table of new VM Ready OUI configuration.
vmReadyNewCfgOuiEntry row .1.3.6.1.4.1.26543.2.7.4.15.8.3.1
A row in the new VM Ready OUI table.
Indexes
No indexes recorded
Column Syntax OID
vmReadyNewCfgOuiMacIdx
OUI of locally administred MAC address
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.26543.2.7.4.15.8.3.1.1
vmReadyNewCfgOuiMac
New OUI of locally administred MAC address
Format xx:yy:zz
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.8.3.1.2
vmReadyNewCfgVendor
Vendor name of the OUI locally administred
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.15.8.3.1.3
vmReadyNewCfgDelete
If set the OUI of the locally administred MAC would be deleted
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.15.8.3.1.4

vnicCurCfgVnicTable

table
.1.3.6.1.4.1.26543.2.7.4.16.7 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vnicCurCfgVnicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vnicCurCfgVnicTable' 
The table of vNICs
vnicCurCfgVnicEntry row .1.3.6.1.4.1.26543.2.7.4.16.7.1
A vNIC in the vnicCurCfgVnicTable
Indexes
No indexes recorded
Column Syntax OID
vnicCurCfgVnicPortIndex
The port number of the vNIC.
PortNumber
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.16.7.1.1
vnicCurCfgVnicIndex
The vNIC number of the vNIC.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.7.1.2
vnicCurCfgVnicState
The state the vNIC.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.26543.2.7.4.16.7.1.3
vnicCurCfgVnicBw
The maximum bandwidth the vNIC.
Integer32 .1.3.6.1.4.1.26543.2.7.4.16.7.1.4
vnicCurCfgVnicType
The type of the vNIC.
Enumeration .1.3.6.1.4.1.26543.2.7.4.16.7.1.5
vnicCurCfgVnicMAC
The MAC address of the vNIC.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.7.1.6

vnicNewCfgVnicTable

table
.1.3.6.1.4.1.26543.2.7.4.16.8 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vnicNewCfgVnicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vnicNewCfgVnicTable' 
The table of vNICs
vnicNewCfgVnicEntry row .1.3.6.1.4.1.26543.2.7.4.16.8.1
A vNIC in the vnicNewCfgVnicTable
Indexes
No indexes recorded
Column Syntax OID
vnicNewCfgVnicPortIndex
The port number of the vNIC.
PortNumber
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.26543.2.7.4.16.8.1.1
vnicNewCfgVnicIndex
The vNIC number of the vNIC.
SNMPv2-SMIInteger32
Enumerated Values:
1other
2delete
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.8.1.2
vnicNewCfgVnicState
The state the vNIC.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.16.8.1.3
vnicNewCfgVnicBw
The maximum bandwidth the vNIC.
Integer32r/w .1.3.6.1.4.1.26543.2.7.4.16.8.1.4

vnicCurCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.16.9 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vnicCurCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vnicCurCfgGroupTable' 
The table of vNIC Groups
vnicCurCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.16.9.1
A vNIC in the vnicCurCfgGroupTable
Indexes
No indexes recorded
Column Syntax OID
vnicCurCfgGroupIndex
The vNIC group number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.9.1.1
vnicCurCfgGroupState
The vNIC group state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.16.9.1.2
vnicCurCfgGroupVlan
The vNIC group vlan number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.9.1.3
vnicCurCfgGroupFailoverState
The vNIC group failover state.
Enumeration .1.3.6.1.4.1.26543.2.7.4.16.9.1.4
vnicCurCfgGroupVnics
The vNICs in the vNIC group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.9.1.5
vnicCurCfgGroupPorts
Non-vNIC Ports and/or uplink port in the vNIC group.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.9.1.6
vnicCurCfgGroupTrunk
Uplink trunk in the vNIC group.
SNMPv2-SMIInteger32
Enumerated Values:
1auto
2noNegotiation
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.9.1.7

vnicNewCfgGroupTable

table
.1.3.6.1.4.1.26543.2.7.4.16.10 · 1 row entry · 14 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk vnicNewCfgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::vnicNewCfgGroupTable' 
The table of vNIC Groups
vnicNewCfgGroupEntry row .1.3.6.1.4.1.26543.2.7.4.16.10.1
A vNIC in the vnicNewCfgGroupTable
Indexes
No indexes recorded
Column Syntax OID
vnicNewCfgGroupIndex
The vNIC group number.
SNMPv2-SMIInteger32
Enumerated Values:
1enable
2disable
3send
4receive
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.1
vnicNewCfgGroupState
Enable/disalbe the vNIC group.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.16.10.1.2
vnicNewCfgGroupVlan
Set the vNIC group vlan number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.3
vnicNewCfgGroupFailoverState
Set the vNIC group failover state.
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.16.10.1.4
vnicNewCfgGroupAddVnic
Add a vNIC to the vNIC group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.5
vnicNewCfgGroupRemVnic
Remove a vNIC to the vNIC group.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1enable
2disable
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.6
vnicNewCfgGroupAddPort
Add a non-vNIC port or a uplink port to the vNIC group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.7
vnicNewCfgGroupRemPort
Remove a non-vNIC port or a uplink port from the vNIC group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.8
vnicNewCfgGroupAddTrunk
Add a uplink trunk to the vNIC group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.9
vnicNewCfgGroupRemTrunk
Remove the uplink trunk from the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the uplink trunk from the vNIC group
Enumerationr/w .1.3.6.1.4.1.26543.2.7.4.16.10.1.10
vnicNewCfgGroupDelete
Delete the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the vNIC group
Enumerationr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.13
vnicNewCfgGroupVnics
The vNICs in the vNIC group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.14
vnicNewCfgGroupPorts
Non-vNIC Ports and/or uplink port in the vNIC group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.15
vnicNewCfgGroupTrunk
Uplink trunk in the vNIC group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.2.7.4.16.10.1.16

ifMainTable

table
.1.3.6.1.4.1.26543.102.27.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ifMainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ifMainTable' 
A list of all the interface entries in the system. 
This table contains objects which are applicable to all
types of interfaces in the system. This table is a 
proprietary extension to the standard ifTable and 
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex.
ifMainEntry row .1.3.6.1.4.1.26543.102.27.1.4.1
An entry containing management information applicable
to a particular interface.
Indexes
No indexes recorded
Column Syntax OID
ifMainIndex
A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.
IF-MIBInterfaceIndex
Enumerated Values:
1ok
2clear
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.26543.102.27.1.4.1.1
ifMainPortName
This is used to assign a alias to a port
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.102.27.1.4.1.9

ibmnosPortCtrlTable

table
.1.3.6.1.4.1.26543.102.81.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ibmnosPortCtrlTable' 
A table to control the port specific parameters of the device like speed,
duplex mode, etc.
ibmnosPortCtrlEntry row .1.3.6.1.4.1.26543.102.81.2.2.1
An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.
Indexes
No indexes recorded
Column Syntax OID
ibmnosPortCtrlIndex
Interface index of the port for which the configuration
in this entry applies.
Integer32
Enumerated Values:
0none
1sfp
2cx4
3sfpplus
6dac
 .1.3.6.1.4.1.26543.102.81.2.2.1.1
ibmnosPortCtrlMode
Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.

If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link …
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.102.81.2.2.1.2
ibmnosPortCtrlDuplex
Configures interface data transfer mode as full-duplex or half-duplex.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value '…
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.102.81.2.2.1.3
ibmnosPortCtrlSpeed
Configures interface speed.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'
Enumerationr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.26543.102.81.2.2.1.4
ibmnosPortCtrlFlowControl
Enables / disables flow control for the interface.

This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negot…
Enumerationr/w .1.3.6.1.4.1.26543.102.81.2.2.1.5
ibmnosPortCtrlAlias
The port alias.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.26543.102.81.2.2.1.10

ibmnosPortCfgTable

table
.1.3.6.1.4.1.26543.102.102.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ibmnosPortCfgTable' 
The table of port configuration in the new_configuration block.
ibmnosPortCfgTableEntry row .1.3.6.1.4.1.26543.102.102.2.1.1
A row in the port configuration table in the new_configuration block.
Indexes
No indexes recorded
Column Syntax OID
ibmnosPortCfgIndx
The index of the row in port configurations table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.2.1.1.1
ibmnosPortCfgVlanTag
VLAN tag configured for the port
Enumerationr/w .1.3.6.1.4.1.26543.102.102.2.1.1.2

ibmnosFdbTable

table
.1.3.6.1.4.1.26543.102.102.13.5 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ibmnosFdbTable' 
The table of FDB entries.
ibmnosFdbEntry row .1.3.6.1.4.1.26543.102.102.13.5.1
A row in the FDB table
Indexes
No indexes recorded
Column Syntax OID
ibmnosFdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.13.5.1.1
ibmnosFdbMacAddr
The MAC address for the FDB entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.26543.102.102.13.5.1.2
ibmnosFdbMacAddrStr
The MAC address in hex format for the FDB entry. This node is added for
display purpose.
OctetString .1.3.6.1.4.1.26543.102.102.13.5.1.3
ibmnosFdbVlanId
The VLAN ID for the FDB entry. This node is added for display purpose.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.13.5.1.4
ibmnosFdbSrcPort
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been l…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.13.5.1.5
ibmnosFdbSrcTrunk
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.13.5.1.6
ibmnosFdbState
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration .1.3.6.1.4.1.26543.102.102.13.5.1.7
ibmnosFdbStatus
'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.13.5.1.10
ibmnosFdbClearMac
Setting this value to clear(2) clears the corresponding table entry in FDB.
Enumerationr/w .1.3.6.1.4.1.26543.102.102.13.5.1.11

ibmnosSfpInfoTable

table
.1.3.6.1.4.1.26543.102.102.14.22 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ibmnosSfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LENOVO-GbTOR-10G-L2L3-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LENOVO-GbTOR-10G-L2L3-MIB::ibmnosSfpInfoTable' 
The table of external port SFP information.
ibmnosSfpInfoTableEntry row .1.3.6.1.4.1.26543.102.102.14.22.1
A row in the external port SFP information table.
Indexes
No indexes recorded
Column Syntax OID
ibmnosSfpInfoIndx
Sfp Info index (port number)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.26543.102.102.14.22.1.1
ibmnosSfpInfoDescription
Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))
Enumeration .1.3.6.1.4.1.26543.102.102.14.22.1.2
ibmnosSfpInfoSerialNumber
Serial Number.
OctetString .1.3.6.1.4.1.26543.102.102.14.22.1.3
ibmnosSfpInfoPartNumber
Part Number.
OctetString .1.3.6.1.4.1.26543.102.102.14.22.1.4
ibmnosSfpInfoHWRevision
Hardware Revision
OctetString .1.3.6.1.4.1.26543.102.102.14.22.1.5