LANCOM-ROUTING6-MIB Table View

There is no global administrative flag for router advertisement.  The global
routing flag (agentIpv6RoutingMode) will be used for this purpose.  If routing
is disabled, router advertisement is disabled as well.

agentIpv6RouterAdvertisementEntry row .1.3.6.1.4.1.2356.16.1.30.1.3.1

Indexes

agentIpv6RouterAdvertisementIfIndex

Column	Syntax	OID
agentIpv6RouterAdvertisementIfIndex Interface Number to configure Router Advertisement on.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2356.16.1.30.1.3.1.1
agentIpv6RouterAdvertisementSuppressMode Enable or disable router advertisement suppression on the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.30.1.3.1.2
agentIpv6RouterAdvertisementMaxAdvertisementInterval Maximum time allowed between sending router advertisements from the interface.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.2356.16.1.30.1.3.1.3
agentIpv6RouterAdvertisementAdvertisementLifetime Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.	Integer32r/w Constraints: range: 4-65520	.1.3.6.1.4.1.2356.16.1.30.1.3.1.4
agentIpv6RouterAdvertisementNbrSolicitInterval Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.2356.16.1.30.1.3.1.5
agentIpv6RouterAdvertisementReachableTime Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.2356.16.1.30.1.3.1.6
agentIpv6RouterAdvertisementManagedFlag Value of managed config field of router advertisement sent from the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.30.1.3.1.7
agentIpv6RouterAdvertisementOtherFlag Value of other config field of router advertisement sent from the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.30.1.3.1.8
agentIpv6RouterAdvertisementHopLimitUnspecifiedMode This object configures the router to send Router Advertisements on an interface with unspecified (0) Current Hop Limit value. This will tell the hosts on that link to ignore the Hop Limit from this Router.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.30.1.3.1.9

The list of IPv6 address prefixes of
IPv6 interfaces.

agentIpv6AddrPrefixEntry row .1.3.6.1.4.1.2356.16.1.30.1.4.1

An interface entry containing objects of
a particular IPv6 address prefix.

Indexes

agentIpv6InterfaceIfIndex agentIpv6AddrPrefix agentIpv6AddrPrefixLength

Column	Syntax	OID
agentIpv6AddrPrefix The prefix associated with the this interface.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.2356.16.1.30.1.4.1.1
agentIpv6AddrPrefixLength The length of the prefix (in bits).	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2356.16.1.30.1.4.1.2
agentIpv6AddrPrefixOnLinkFlag This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.30.1.4.1.3
agentIpv6AddrPrefixAutonomousFlag Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoc…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.30.1.4.1.4
agentIpv6AddrPrefixAdvPreferredLifetime It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix shoul…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.4.1.5
agentIpv6AddrPrefixAdvValidLifetime It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.4.1.6

The table of addressing information relevant to
this node's interface addresses.

agentIpv6AddrEntry row .1.3.6.1.4.1.2356.16.1.30.1.5.1

The addressing information for one of this
node's interface addresses.

Indexes

agentIpv6InterfaceIfIndex agentIpv6AddrAddress

Column	Syntax	OID
agentIpv6AddrAddress The IPv6 address to which this entry's addressing information pertains.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.5.1.1
agentIpv6AddrPfxLength The length of the prefix (in bits) associated with the IPv6 address of this entry.	bitsInteger32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2356.16.1.30.1.5.1.2
agentIpv6AddrEui64Flag This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.30.1.5.1.3
agentIpv6AddrStatus Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.30.1.5.1.4

IPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination.

agentIpv6StaticRouteEntry row .1.3.6.1.4.1.2356.16.1.30.1.6.1

A routing entry.

Indexes

agentIpv6StaticRouteDest agentIpv6StaticRoutePfxLength agentIpv6StaticRouteIfIndex agentIpv6StaticRouteNextHop

Column	Syntax	OID
agentIpv6StaticRouteDest The destination IPv6 address of this route. This object may not take a Multicast address value.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.2356.16.1.30.1.6.1.1
agentIpv6StaticRoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2356.16.1.30.1.6.1.2
agentIpv6StaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	IPV6-TCIpv6IfIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2356.16.1.30.1.6.1.3
agentIpv6StaticRouteNextHop The address of the next system en route.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.6.1.4
agentIpv6StaticRoutePreference The routing preference metric for this route. A lower value is more preferred.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2356.16.1.30.1.6.1.5
agentIpv6StaticRouteStatus Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the i…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.30.1.6.1.6

IPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port.

agentIpv6ServicePortPrefixEntry row .1.3.6.1.4.1.2356.16.1.30.1.7.1.1

An IPv6 Service Port Prefix entry.

Indexes

agentIpv6ServicePortPrefixIndex

Column	Syntax	OID
agentIpv6ServicePortPrefixIndex The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.7.1.1.1
agentIpv6ServicePortPrefix The Ipv6 Prefix Address configured on the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.7.1.1.2
agentIpv6ServicePortPrefixLength The length of the IPv6 Prefix Address.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.7.1.1.3

IPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port.

agentIpv6ServicePortDefaultRouterEntry row .1.3.6.1.4.1.2356.16.1.30.1.7.2.1

An IPv6 Service Port Default Router entry.

Indexes

agentIpv6ServicePortDefaultRouterIndex

Column	Syntax	OID
agentIpv6ServicePortDefaultRouterIndex The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.7.2.1.1
agentIpv6ServicePortDefaultRouter The Address of the IPv6 Default Router configured on the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.7.2.1.2

IPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port.

agentIpv6ServicePortNbrEntry row .1.3.6.1.4.1.2356.16.1.30.1.7.3.1

An IPv6 Service Port Neighbor entry.

Indexes

agentIpv6ServicePortNbrAddr

Column	Syntax	OID
agentIpv6ServicePortNbrAddr The Ipv6 Address of a neighbor switch visible to the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.1
agentIpv6ServicePortNbrPhysAddr The MacAddress of the neighboring switch.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.2
agentIpv6ServicePortNbrState The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from…	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 6 unknown	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.3
agentIpv6ServicePortNbrUpdated The last sysUpTime that this neighbor has been updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.4
agentIpv6ServicePortNbrIsRouter Returns true(1) if the neighbor machine is a router, false(2) otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.5
agentIpv6ServicePortNbrType The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that …	Enumeration Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2356.16.1.30.1.7.3.1.6

The table contains an entry for each static
IPv6 Neighbor on the Service Port.

agentIpv6ServicePortNbrCfgEntry row .1.3.6.1.4.1.2356.16.1.30.1.7.4.1

An entry of the static IPv6 Neighbor on the Service Port.

Indexes

agentIpv6ServicePortNbrCfgAddr

Column	Syntax	OID
agentIpv6ServicePortNbrCfgAddr The Ipv6 Address of a static neighbor on the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.7.4.1.1
agentIpv6ServicePortNbrCfgPhysAddr The MAC Address of a static neighbor on the Service Port.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.30.1.7.4.1.2
agentIpv6ServicePortNbrCfgEntryStatus Create or delete the static neighbor entry on the Service Port. The configured static neighbor entry is always active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.30.1.7.4.1.3

Information about the DHCPv6 Client parameters on the interfaces.

agentDhcp6ClientParametersEntry row .1.3.6.1.4.1.2356.16.1.30.1.9.1

DHCPv6 Client information on an interface.

Indexes

agentDhcp6ClientInterfaceIndex

Column	Syntax	OID
agentDhcp6ClientInterfaceIndex The Interface index on which the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.1
agentDhcp6ClientPrefix The IPv6 Prefix leased by the DHCPv6 Server.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.2356.16.1.30.1.9.1.2
agentDhcp6ClientPrefixlength The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2356.16.1.30.1.9.1.3
agentDhcp6ClientState The State of the DHCPv6 Client on this interface.	Enumeration Enumerated Values: 0 inactive 1 solicit 2 request 3 active 4 renew 5 rebind 6 release	.1.3.6.1.4.1.2356.16.1.30.1.9.1.4
agentDhcp6ClientServerDUID The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2356.16.1.30.1.9.1.5
agentDhcp6ClientT1Time The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.6
agentDhcp6ClientT2Time The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.7
agentDhcp6ClientIAID An identifier for an identity association chosen by this Client.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.8
agentDhcp6ClientPreferredLifeTime The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.9
agentDhcp6ClientValidLifeTime The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.10
agentDhcp6ClientRenewTime The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.11
agentDhcp6ClientExpireTime The time (in seconds) when the DHCPv6 leased address expires.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.9.1.12

A count of the number of routes with each number of ECMP next hops. 
A walk of this table only returns the entries with a non-zero value 
for agentIpv6EcmpRouteCount.

agentIpv6EcmpCountEntry row .1.3.6.1.4.1.2356.16.1.30.1.11.1

Number of IPv6 routes with a given number of next hops.

Indexes

agentIpv6EcmpNextHopCount

Column	Syntax	OID
agentIpv6EcmpNextHopCount The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.2356.16.1.30.1.11.1.1
agentIpv6EcmpRouteCount The number of IPv6 routes with agentIpv6EcmpNextHopCount next hops.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.30.1.11.1.2

IPv6 Network Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Network Port.

agentIpv6NetworkPortNbrEntry row .1.3.6.1.4.1.2356.16.1.30.1.12.1.1

An IPv6 Network Port Neighbor entry.

Indexes

agentIpv6NetworkPortNbrAddr

Column	Syntax	OID
agentIpv6NetworkPortNbrAddr The Ipv6 Address of a neighbor switch visible to the Network Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.1
agentIpv6NetworkPortNbrPhysAddr The MacAddress of the neighboring switch.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.2
agentIpv6NetworkPortNbrState The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from…	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 6 unknown	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.3
agentIpv6NetworkPortNbrUpdated The last sysUpTime that this neighbor has been updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.4
agentIpv6NetworkPortNbrIsRouter Returns true(1) if the neighbor machine is a router, false(2) otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.5
agentIpv6NetworkPortNbrType The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that …	Enumeration Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2356.16.1.30.1.12.1.1.6

The table contains an entry for each static
IPv6 Neighbor on the Network Port.

agentIpv6NetworkPortNbrCfgEntry row .1.3.6.1.4.1.2356.16.1.30.1.12.2.1

An entry of the static IPv6 Neighbor on the Network Port.

Indexes

agentIpv6NetworkPortNbrCfgAddr

Column	Syntax	OID
agentIpv6NetworkPortNbrCfgAddr The Ipv6 Address of a static neighbor on the Network Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.12.2.1.1
agentIpv6NetworkPortNbrCfgPhysAddr The MAC Address of a static neighbor on the Network Port.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.30.1.12.2.1.2
agentIpv6NetworkPortNbrCfgEntryStatus Create or delete the static neighbor entry on the Network Port. The configured static neighbor entry is always active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.30.1.12.2.1.3

The table contains an entry for each static
IPv6 Neighbor on the Network Port.

agentIpv6NbrCfgEntry row .1.3.6.1.4.1.2356.16.1.30.1.13.1

An entry of the static IPv6 Neighbor on the Network Port.

Indexes

agentIpv6IfIndex agentIpv6NbrCfgAddr

Column	Syntax	OID
agentIpv6IfIndex A unique non-zero value identifying the particular IPv6 interface.	IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2356.16.1.30.1.13.1.1
agentIpv6NbrCfgAddr The Ipv6 Address of a static neighbor on the Routing or Host interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2356.16.1.30.1.13.1.2
agentIpv6NbrCfgPhysAddr The MAC Address of a static neighbor on the Routing or Host interface.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.30.1.13.1.3
agentIpv6NbrCfgEntryStatus Create or delete the static neighbor entry on the Routing or Host interface. The configured static neighbor entry is always active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.30.1.13.1.4