LANCOM-ROUTE-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
22

fastpathRoutePolicyNameTable

table
.1.3.6.1.4.1.2356.16.1.2.20.1 · 1 row entry · 4 columns
Open in standard view
Uses the lancom variant from /opt/observium/mibs/lancom.
Command help
Walk fastpathRoutePolicyNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-ROUTE-POLICY-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-ROUTE-POLICY-MIB::fastpathRoutePolicyNameTable' 
Table to configure or fetch current list of route-map statements
fastpathRoutePolicyNameEntry row .1.3.6.1.4.1.2356.16.1.2.20.1.1
Each entry in this table corresponds to a route-map statement
Indexes
Column Syntax OID
fastpathRoutePolicyName
The name of a Route Map statement.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2356.16.1.2.20.1.1.1
fastpathRoutePolicyStmtActionType
The action associated with this route-map statement.
This can be either Permit/Deny
FastpathRoutePolicyActionr/w
Type Values:
1permit
2deny
 .1.3.6.1.4.1.2356.16.1.2.20.1.1.2
fastpathRoutePolicySequence
Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2356.16.1.2.20.1.1.3
fastpathRoutePolicyNameRowStatus
Controls creation and deletion of Row Status entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2356.16.1.2.20.1.1.4

fastpathRoutePolicyStamentTable

table
.1.3.6.1.4.1.2356.16.1.2.20.2 · 1 row entry · 15 columns
Open in standard view
Uses the lancom variant from /opt/observium/mibs/lancom.
Command help
Walk fastpathRoutePolicyStamentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-ROUTE-POLICY-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-ROUTE-POLICY-MIB::fastpathRoutePolicyStamentTable' 
Table to configure match or set statements in a route-map statement.
fastpathRoutePolicyStatementEntry row .1.3.6.1.4.1.2356.16.1.2.20.2.1
Each entry describes match and set terms in a route-map statement if configured
Indexes
Column Syntax OID
fastpathRoutePolicyStmtName
The name of a Route Map.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.1
fastpathRoutePolicyStmtSeqNum
Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.2
fastpathRoutePolicyStmtAction
The action associated with this route-map statement.
This can be either Permit/Deny
FastpathRoutePolicyAction
Type Values:
1permit
2deny
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.3
fastpathRoutePolicyStmtMatchIpv4AclList
The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.4
fastpathRoutePolicyStmtMatchIpv4AclDelList
The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.This
list is used to…
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.5
fastpathRoutePolicyStmtMatchMacAclList
The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.6
fastpathRoutePolicyStmtMatchMacAclDelList
The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement. This MIB object is
used to delete MAC ACL lists matched in a route-map
statement via fastpat…
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.7
fastpathRoutePolicyStmtMatchPacketLengthRangeMin
Minimum value in the packet length range in a match
length term. A value of zero is used to disable/remove
minimum length configuration.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.8
fastpathRoutePolicyStmtMatchPacketLengthRangeMax
Maximum value in the packet length range in a match
length term. A value of zero is used to disable/remove
maximum length configuration.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.9
fastpathRoutePolicyStmtSetIpNextHopList
The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.10
fastpathRoutePolicyStmtSetIpNextHopDelList
The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This
MIB object is used to delete IP next-hop list configured
via fastpathRoutePolicyStmtSetIpNextHopList
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.11
fastpathRoutePolicyStmtSetDefaultIpNextHopList
The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.12
fastpathRoutePolicyStmtSetDefaultIpNextHopDelList
The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This MIB
object is used to delete IP default next-hop list configured
via fastpathRoutePolicyStmtSetDefau…
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.2356.16.1.2.20.2.1.13
fastpathRoutePolicyStmtSetIpPrecedence
IP Precedence value to be remarked. This is specified through
set clause in route-map statement. In order to remove configured precedence value,
use invalid(8) option.
FastpathRoutePolicyStmtIpPrecedencer/w
Type Values:
0routine
1priority
2immediate
3flash
4flash-override
5critical
6internet
7network
8invalid
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.14
fastpathRoutePolicyStmtSetIntfNull0
Specifying null0 as an interface in a route-map
statement
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2356.16.1.2.20.2.1.15

fastpathRoutePolicyIfTable

table
.1.3.6.1.4.1.2356.16.1.2.20.3 · 1 row entry · 3 columns
Open in standard view
Uses the lancom variant from /opt/observium/mibs/lancom.
Command help
Walk fastpathRoutePolicyIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-ROUTE-POLICY-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-ROUTE-POLICY-MIB::fastpathRoutePolicyIfTable' 
A table of interfaces on which route-map is applied.
fastpathRoutePolicyIfEntry row .1.3.6.1.4.1.2356.16.1.2.20.3.1
Indexes
Column Syntax OID
fastpathRoutePolicyIfIndex
Interface to which route-map needs to be applied or Interface from which route-map needs to be removed.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2356.16.1.2.20.3.1.1
fastpathRoutePolicyIfName
The name of a Route Map.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2356.16.1.2.20.3.1.2
fastpathRoutePolicyIfRowStatus
Controls creation and deletion of Row Status entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2356.16.1.2.20.3.1.3