LANCOM-LOGGING-MIB Table View

Syslog host table containing syslog host entries.

agentLogSyslogHostEntry row .1.3.6.1.4.1.2356.16.1.14.1.4.5.1

Syslog Host entry attributes.

Indexes

agentLogHostTableIndex

Column	Syntax	OID
agentLogHostTableIndex Index to syslog host entry in syslog host table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.1
agentLogHostTableIpAddressType Syslog Host table IP Address Type.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.2
agentLogHostTableIpAddress Syslog Host table IP Address. Set operation of this object can be successful only when the valid IpAddressType (Ipv4, Ipv6 or DNS) is configured and the address specified is valid for that Address type.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.3
agentLogHostTablePort Syslog Host table port number.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.4
agentLogHostTableSeverityFilter Configures the minimum severity that will be stored in the In Memory log.	AgentLogSeverityr/w Type Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 informational 7 debug	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.5
agentLogHostTableRowStatus Syslog Host table row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.7
agentLogHostTableTlsTransportMode Configures Secure TLS Transport Mode for sending log messages to remote syslog servers.By default TLS is disabled.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.8
agentLogHostTableTlsAuthenticationMode Configures the Authentication Mode to be used for TLS Anonymous Authentication Mode allows to connect to servers having no client authentiaction X509Name Authentication Mode allows to connect to syslog servers acceptin…	Enumerationr/w Enumerated Values: 1 anon 2 x509name	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.9
agentLogHostTableX509CertNum Configures the certificate index number, to be used for x509name authentication mode. This index number corresponds to index used for downloading certificates to system.	Unsigned32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2356.16.1.14.1.4.5.1.10

The (conceptual) table listing the destination email address and the message type.

agentLogEmailToAddrEntry row .1.3.6.1.4.1.2356.16.1.14.1.6.7.1

An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses.

Indexes

agentLogEmailToAddrMessageType agentLogEmailToAddr

Column	Syntax	OID
agentLogEmailToAddrMessageType Log message Type	Enumeration Enumerated Values: 1 critical 2 non-critical	.1.3.6.1.4.1.2356.16.1.14.1.6.7.1.1
agentLogEmailToAddr Email Sender Address	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.7.1.2
agentLogEmailToAddrEntryStatus This is to create or delete the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.14.1.6.7.1.3

The (conceptual) table listing the subject of the email and the message type.

agentLogEmailSubjectEntry row .1.3.6.1.4.1.2356.16.1.14.1.6.8.1

An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type.

Indexes

agentLogEmailSubjectMessageType

Column	Syntax	OID
agentLogEmailSubjectMessageType Log message Type	Enumeration Enumerated Values: 1 critical 2 non-critical	.1.3.6.1.4.1.2356.16.1.14.1.6.8.1.1
agentLogEmailSubject Email Subject. When this object is set to empty-string, it resets to factory default string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.8.1.2
agentLogEmailSubjectEntryStatus This is to create or delete the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.14.1.6.8.1.3

The (conceptual) table listing the mail servers

agentLogEmailMailServerEntry row .1.3.6.1.4.1.2356.16.1.14.1.6.9.1

An entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server.

Indexes

agentLogEmailSmtpAddrType agentLogEmailSmtpAddr

Column	Syntax	OID
agentLogEmailSmtpAddrType Email SMTP Address type	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.1
agentLogEmailSmtpAddr SMTP server Address	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.2
agentLogEmailSmtpPort SMTP Port number. When this object is set to 0, it resets to factory default port number.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.3
agentLogEmailSecurity This is the authentication mechanism that should be used.	Enumerationr/w Enumerated Values: 1 none 2 tlsv1	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.4
agentLogEmailloginID This user id is used while the switch/router is being authenticated by the SMTP server.The user ID should be minimum of 1 charcter to maximum of 16 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.5
agentLogEmailPassword This password is used while the switch/router is being authenticated by the SMTP server.The password should be minimum of 1 character to maximum of 16 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.6
agentLogEmailEntryStatus This is to create or delete the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.14.1.6.9.1.7

The (conceptual) table listing the mail servers

agentLogEmailMailServerExEntry row .1.3.6.1.4.1.2356.16.1.14.1.6.150.1

An entry (conceptual row) in the agentLogEmailMailServerTableEx. This entry shows the configuration for mail server.

Indexes

agentLogEmailSmtpAddrAscii

Column	Syntax	OID
agentLogEmailSmtpAddrAscii SMTP server Address	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.1
agentLogEmailSmtpPortEx SMTP Port number. When this object is set to 0, it resets to factory default port number.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.3
agentLogEmailSecurityEx This is the authentication mechanism that should be used.	Enumerationr/w Enumerated Values: 1 none 2 tlsv1	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.4
agentLogEmailloginIDEx This user id is used while the switch/router is being authenticated by the SMTP server.The user ID should be minimum of 1 charcter to maximum of 16 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.5
agentLogEmailPasswordEx This password is used while the switch/router is being authenticated by the SMTP server.The password should be minimum of 1 character to maximum of 16 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.6
agentLogEmailEntryStatusEx This is to create or delete the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2356.16.1.14.1.6.150.1.7

The in-memory log table containing sequence of in-memory log entries.

agentLogInMemoryEntry row .1.3.6.1.4.1.2356.16.1.14.3.2.1

An individual message entry in in-memory log table.

Indexes

agentLogInMemoryMsgIndex

Column	Syntax	OID
agentLogInMemoryMsgIndex The index to message entry in the in-memory log table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.14.3.2.1.1
agentLogInMemoryMsgText Message text info for inmemory logged messages.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.3.2.1.2

Table for storing persistent log messages.

agentLogPersistentEntry row .1.3.6.1.4.1.2356.16.1.14.4.4.1

Log entry details for logging message in persistent log table.

Indexes

agentLogMsgPersistentMsgIndex

Column	Syntax	OID
agentLogMsgPersistentMsgIndex Table index for logging message in persistent log table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.14.4.4.1.1
agentLogMsgPersistentMsgText The text corresponding to persistent log message.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2356.16.1.14.4.4.1.2