LANCOM-GS-2352P-MIB Table View

gs2352pSyslogDetailedInfoTime

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.5.2.2.1.2

OctetString

Enumerated Values:

0	empty
1	active
2	edit
3	delete

.1.3.6.1.4.1.2356.800.3.2353.1.5.2.2.1.3

gs2352pSyslogDetailedInfoMessage

gs2352pTrapHostConfVersion

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.5.2.2.1.4

gs2352pGetCommunityConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.5 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pGetCommunityConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pGetCommunityConfTable'

Show get-community of the SNMP.

gs2352pGetCommunityConfEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.1.5.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pCommunityConfIndex index, range : 1 - 5.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.2356.800.3.2353.1.6.1.5.1.1`
gs2352pCommunityConfGetCommunity Get/Set the get-community of the SNMP.	SNMPv2-TCDisplayStringr/w Constraints: `range: 1-32` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.1.6.1.5.1.2`

gs2352pTrapHostConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6 · 1 row entry · 13 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pTrapHostConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pTrapHostConfTable'

A list of trap host entry. The numbers of entries are given by the value of gs2352pTrapHostConfNumber.

gs2352pTrapHostConfEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1

This is the entry information for trap host.

Indexes

No indexes recorded

Column Syntax OID

gs2352pTrapHostConfIndex

The index of the trap host entry.

Integer32

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.1

The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.2

gs2352pTrapHostConfIPType

Server IP Type. Default: 4,
4 : IPv4,
6 : IPv6.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.3

gs2352pTrapHostConfIP

This is the IP of the trap host.

gs2352pTrapHostConfCommunity

Constraints:
range: 1-10

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.4

gs2352pTrapHostConfPort

This is the receiving-port number of the trap host.
range : 1 - 65535.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.5

The community/security name for the trap PDU.

OctetStringr/w

Enumerated Values:

1	noauthnopriv
2	authnopriv
3	authpriv

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.6

gs2352pTrapHostConfSeverityLevel

The Severity Level.
0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.

Enumerationr/w

Enumerated Values:

0	none
1	md5
2	sha

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.7

gs2352pTrapHostConfSecurityLevel

The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv).

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.8

gs2352pTrapHostConfAuthPtc

Authentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA.

Enumerationr/w

Enumerated Values:

0	none
1	des
2	aes

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.9

gs2352pTrapHostConfAuthPassword

Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SH…

gs2352pTrapHostConfPrivPtc

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.10

This is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES.

Enumerationr/w

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.11

gs2352pTrapHostConfPrivPassword

The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters.

gs2352pTrapHostConfCurrentMode

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.12

0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.1.6.1.13

gs2352pSnmpCommunitiesTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSnmpCommunitiesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSnmpCommunitiesTable'

Create SNMPv1/v2 Communities entry.

gs2352pSnmpCommunitiesEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSnmpCommunitiesIndex

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.1

gs2352pSnmpCommunitiesCommunity

Up to 32 characters describing Community.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.2

gs2352pSnmpCommunitiesUserName

Up to 32 characters describing User Name.

OctetStringr/w

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.3

gs2352pSnmpCommunitiesSourceIP

SNMP access source ip.

gs2352pSnmpCommunitiesSourceMask

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.4

SNMP access source address mask.

gs2352pSnmpCommunitiesRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.5

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Constraints:
range: 1-4

.1.3.6.1.4.1.2356.800.3.2353.1.6.3.2.1.6

gs2352pSnmpUsersTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2 · 1 row entry · 8 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSnmpUsersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSnmpUsersTable'

Create SNMPv3 users entry.

gs2352pSnmpUsersEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSnmpUsersIndex

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.1

gs2352pSnmpUsersUserName

Up to 32 characters describing User Name.

OctetStringr/w

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.2

gs2352pSnmpUsersSecurityLevel

1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.3

gs2352pSnmpUsersAuthenticationProtocol

0: None.
1: MD5.
2: SHA

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.4

gs2352pSnmpUsersAuthenticationPassword

gs2352pSnmpUsersPrivacyProtocol

Constraints:
range: 1-14

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.5

0: None.
1: DES.
2: AES
This is the Privacy Protocol, which is used in AuthPriv.
An empty string will be returned if the security level is not 3(AuthPriv)

Enumerationr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.6

gs2352pSnmpUsersPrivacyPassword

The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters.

gs2352pSnmpUsersRowStatus

Enumerated Values:

0	any
1	v1
2	v2c
3	usm

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.7

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Enumerated Values:

1	noauthnopriv
2	authnopriv
3	authpriv

.1.3.6.1.4.1.2356.800.3.2353.1.6.4.2.1.8

gs2352pSnmpGroupsTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSnmpGroupsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSnmpGroupsTable'

Create SNMPv3 groups entry.

gs2352pSnmpGroupsEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSnmpGroupsIndex

Integer32

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1.1

gs2352pSnmpGroupsSecurityModel

1: v1.
2: v2c.
3: usm.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1.2

gs2352pSnmpGroupsSecurityName

Up to 32 characters describing User Name.

OctetStringr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1.3

gs2352pSnmpGroupsGroupName

Up to 32 characters describing Group Name.

OctetStringr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1.4

gs2352pSnmpGroupsRowStatus

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Constraints:
range: 1-4

.1.3.6.1.4.1.2356.800.3.2353.1.6.5.2.1.5

gs2352pSnmpViewsTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSnmpViewsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSnmpViewsTable'

Create SNMPv1/v2 Views entry.

gs2352pSnmpViewsEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSnmpViewsIndex

Integer32

Enumerated Values:

0	disable
1	auto
2	speed10Half
3	speed10Full
4	speed100Half
5	speed100Full
6	speed1Gfull
7	sfpAutoAMS
8	speed100FXAMS
9	speed1000XAMS
10	speed100FX
11	speed1000X
12	speed10GFull

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1.1

gs2352pSnmpViewsName

Up to 32 characters describing view Name.

OctetStringr/w

Enumerated Values:

0	disable
1	enable
2	noSupport

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1.2

gs2352pSnmpViewsType

1: included, An optional flag to indicate that this view subtree should be included.
2: excluded, An optional flag to indicate that this view subtree should be excluded.

Enumerationr/w

Enumerated Values:

0	disable
1	enable
2	noSupport

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1.3

gs2352pSnmpViewsOIDSubtree

The OID defining the root of the subtree to add to the named view.

OctetStringr/w

Enumerated Values:

0	disable
1	enable
2	noSupport

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1.4

gs2352pSnmpViewsRowStatus

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Constraints:
range: 1518-9600

.1.3.6.1.4.1.2356.800.3.2353.1.6.6.2.1.5

gs2352pSnmpAccessTable

table

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSnmpAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSnmpAccessTable'

Create SNMPv3 Access entry.

gs2352pSnmpAccessEntry row .1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSnmpAccessIndex

Integer32

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.1

gs2352pSnmpAccessGroupName

Up to 32 characters describing Group Name.

OctetStringr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.2

gs2352pSnmpAccessSecurityModel

0: any.
1: v1.
2: v2c.
3: usm.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.3

gs2352pSnmpAccessSecurityLevel

1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy.

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.4

gs2352pSnmpAccessReadViewName

Up to 32 characters describing Read View Name.
None is reserved for Empty.

OctetStringr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.5

gs2352pSnmpAccessWriteViewName

Up to 32 characters describing Write View Name.
None is reserved for Empty.

OctetStringr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.6

gs2352pSnmpAccessRowStatus

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.1.6.7.2.1.7

gs2352pPortConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.1.1 · 1 row entry · 12 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortConfigurationTable'

Show port configurations.

gs2352pPortConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.1.1.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pPortConfPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.1`
gs2352pPortConfPortMedia Show port media.	OctetString	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.2`
gs2352pPortConfLink The current link state.	OctetString	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.3`
gs2352pPortConfCurrentSpeed The current link speed of the port.	OctetString	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.4`
gs2352pPortConfSpeed default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 100…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.5`
gs2352pPortConfCurrentFlowControlRx 0: disable 1: enable 2: no support.	Enumeration	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.6`
gs2352pPortConfCurrentFlowControlTx 0: disable 1: enable 2: no support.	Enumeration	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.7`
gs2352pPortConfFlowControl default: 0, 0: disable 1: enable 2: no support.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.8`
gs2352pPortConfMaxFrameSize default: 9600 , range : 1518 - 9600	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.9`
gs2352pPortConfExcessiveCollisionMode default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.10`
gs2352pPortConfPowerControl default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.11`
gs2352pPortConfDescription Interface specific description. Up to 47 characters describing this interface.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.1.1.1.12`

gs2352pPortTrafficStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.1.2 · 1 row entry · 53 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortTrafficStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortTrafficStatisticsTable'

gs2352pPortTrafficStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pPortTrafficStatisticsPort	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.1`
gs2352pPortTrafficStatisticsClear	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.2`
gs2352pPortTrafficRxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.3`
gs2352pPortTrafficRxOctets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.4`
gs2352pPortTrafficRxUnicast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.5`
gs2352pPortTrafficRxMulticast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.6`
gs2352pPortTrafficRxBroadcast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.7`
gs2352pPortTrafficRxPause	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.8`
gs2352pPortTrafficRx64Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.9`
gs2352pPortTrafficRx65to127Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.10`
gs2352pPortTrafficRx128to255Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.11`
gs2352pPortTrafficRx256to511Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.12`
gs2352pPortTrafficRx512to1023Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.13`
gs2352pPortTrafficRx1024to1526Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.14`
gs2352pPortTrafficRxExceecd1527Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.15`
gs2352pPortTrafficRxQ0	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.16`
gs2352pPortTrafficRxQ1	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.17`
gs2352pPortTrafficRxQ2	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.18`
gs2352pPortTrafficRxQ3	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.19`
gs2352pPortTrafficRxQ4	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.20`
gs2352pPortTrafficRxQ5	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.21`
gs2352pPortTrafficRxQ6	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.22`
gs2352pPortTrafficRxQ7	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.23`
gs2352pPortTrafficRxDrops	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.24`
gs2352pPortTrafficRxCRCorAlignment	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.25`
gs2352pPortTrafficRxUndersize	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.26`
gs2352pPortTrafficRxOversize	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.27`
gs2352pPortTrafficRxFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.28`
gs2352pPortTrafficRxJabber	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.29`
gs2352pPortTrafficRxFiltered	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.30`
gs2352pPortTrafficTxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.31`
gs2352pPortTrafficTxOctets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.32`
gs2352pPortTrafficTxUnicast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.33`
gs2352pPortTrafficTxMulticast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.34`
gs2352pPortTrafficTxBroadcast	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.35`
gs2352pPortTrafficTxPause	SNMPv2-SMICounter64 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.36`
gs2352pPortTrafficTx64Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.37`
gs2352pPortTrafficTx65to127Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.38`
gs2352pPortTrafficTx128to255Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.39`
gs2352pPortTrafficTx256to511Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.40`
gs2352pPortTrafficTx512to1023Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.41`
gs2352pPortTrafficTx1024to1526Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.42`
gs2352pPortTrafficTxExceecd1527Bytes	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.43`
gs2352pPortTrafficTxQ0	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.44`
gs2352pPortTrafficTxQ1	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.45`
gs2352pPortTrafficTxQ2	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.46`
gs2352pPortTrafficTxQ3	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.47`
gs2352pPortTrafficTxQ4	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.48`
gs2352pPortTrafficTxQ5	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.49`
gs2352pPortTrafficTxQ6	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.50`
gs2352pPortTrafficTxQ7	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.51`
gs2352pPortTrafficTxDrops	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.52`
gs2352pPortTrafficTxLateOrExcColl	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.2.1.53`

gs2352pPortQoSStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2 · 1 row entry · 17 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortQoSStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortQoSStatisticsTable'

gs2352pPortQoSStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pPortQoSStatisticsPort	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.1`
gs2352pPortQoSQ0Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.2`
gs2352pPortQoSQ0Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.3`
gs2352pPortQoSQ1Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.4`
gs2352pPortQoSQ1Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.5`
gs2352pPortQoSQ2Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.6`
gs2352pPortQoSQ2Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.7`
gs2352pPortQoSQ3Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.8`
gs2352pPortQoSQ3Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.9`
gs2352pPortQoSQ4Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.10`
gs2352pPortQoSQ4Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.11`
gs2352pPortQoSQ5Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.12`
gs2352pPortQoSQ5Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.13`
gs2352pPortQoSQ6Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.14`
gs2352pPortQoSQ6Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.15`
gs2352pPortQoSQ7Rx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.16`
gs2352pPortQoSQ7Tx	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2356.800.3.2353.2.1.3.2.1.17`

gs2352pSFPInfoTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.1.4 · 1 row entry · 17 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSFPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSFPInfoTable'

gs2352pSFPInfoEntry row .1.3.6.1.4.1.2356.800.3.2353.2.1.4.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pSFPInfoIndex

Integer32

Enumerated Values:

0	disable
1	auto
2	forced

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.1

gs2352pSFPInfoPort

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.2

gs2352pSFPConnectorType

Enumerated Values:

0	oui
1	lldp
2	both

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.3

gs2352pSFPFiberType

gs2352pSFPTxCentralWavelength

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.4

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.5

gs2352pSFPBaudRate

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.6

gs2352pSFPVendorOUI

Constraints:
range: 1-16

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.7

gs2352pSFPVendorName

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.8

gs2352pSFPVendorPN

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.9

gs2352pSFPVendorRev

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.10

gs2352pSFPVendorSN

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.11

gs2352pSFPDateCode

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.12

gs2352pSFPTemperature

Constraints:
range: 1-4095

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.13

gs2352pSFPVcc

Constraints:
range: 200-1000

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.14

gs2352pSFPMon1Bias

Constraints:
range: 600-3000

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.15

gs2352pSFPMon2TxPWR

Constraints:
range: 10000-50000

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.16

gs2352pSFPMon3RxPWR

gs2352pVoiceVLANTelephonyOUI

Enumerated Values:

gvrp

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.1.4.1.17

gs2352pVoiceVLANPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pVoiceVLANPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pVoiceVLANPortTable'

Show Voice Vlan configuration.

gs2352pVoiceVLANPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pVoiceVLANPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1.1`
gs2352pVoiceVLANPortMode Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members auto…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1.2`
gs2352pVoiceVLANPortSecurity Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all non-telephone MAC address in Voice VLAN …	Enumerationr/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1.3`
gs2352pVoiceVLANPortDiscoveryProtocol Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.)	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1.4`
gs2352pVoiceVLANSkipNAS Voice VLAN skip NAS mode. default: 0, 0: Disable (Do not skip NAS on Voice VLAN.) 1: enable (Enable skipping of NAS on Voice VLAN. When the function is enabled, authentication through the NAS module is not …	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.2.1.5.1.5`

gs2352pVoiceVLANOUITable

table

.1.3.6.1.4.1.2356.800.3.2353.2.2.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pVoiceVLANOUITable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pVoiceVLANOUITable'

Create Voice VLAN OUI entry. Modify OUI table will
restart auto detect OUI process.

gs2352pVoiceVLANOUIEntry row .1.3.6.1.4.1.2356.800.3.2353.2.2.2.2.1

Indexes

gs2352pGVRPConfPort

Column Syntax OID

gs2352pVoiceVLANOUIIndex

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.2.2.2.1.1

OUI address, format : 0a 1b 2c

OctetStringr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.2.2.2.1.2

gs2352pVoiceVLANDescription

Up to 32 characters describing OUI address.

OctetStringr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.2.2.2.1.3

gs2352pVoiceVLANOUIRowStatus

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.2.2.2.1.4

gs2352pGARPConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.3.1 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pGARPConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pGARPConfTable'

gs2352pGARPConfEntry row .1.3.6.1.4.1.2356.800.3.2353.2.3.1.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pGARPConfPort

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.1

gs2352pGARPJoinTimer

default: 200, range : 200 - 1000

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.2

gs2352pGARPLeaveTimer

default: 600 , range : 600 - 3000

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.3

gs2352pGARPLeaveAllTimer

default: 10000, range : 10000 - 50000

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.4

gs2352pGARPApplicantion

default: 1
1: GVRP

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.5

gs2352pGARPAttributeType

default: 1
1: VLAN

Enumerationr/w

Enumerated Values:

0	disable
1	enable
2	rxOnly
3	txOnly

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.6

gs2352pGARPApplicant

default: 0
0: normal-participant
1: non-participant

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.3.1.1.7

gs2352pGARPStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pGARPStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pGARPStatisticsTable'

Show the basic GARP port statistics.

gs2352pGARPStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pGARPStatisticsPort

port, range : 1 - port number.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2356.800.3.2353.2.3.2.1.1

gs2352pGARPStatisticsPeerMAC

Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.

gs2352pGARPStatisticsFailedCount

Enumerated Values:

0	deny
1	permit

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.3.2.1.2

explain Failed count here.

gs2352pACLPortsConfPolicyID

Constraints:
range: 0-12

.1.3.6.1.4.1.2356.800.3.2353.2.3.2.1.3

gs2352pGVRPConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.4.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pGVRPConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pGVRPConfTable'

gs2352pGVRPConfEntry row .1.3.6.1.4.1.2356.800.3.2353.2.4.1.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pGVRPConfPort

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.4.1.2.1.1

gs2352pGVRPConfPortMode

default: 0
1: enable
0: disable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.4.1.2.1.2

gs2352pGVRPConfPortRRole

default: 0
1: enable
0: disable

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.4.1.2.1.3

gs2352pGVRPStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pGVRPStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pGVRPStatisticsTable'

gs2352pGVRPStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.4.2.1

Indexes

gs2352pACLRateLimiterID

Column	Syntax	OID
gs2352pGVRPStatisticsPort	Integer32 Constraints: `range: 1-12`	`.1.3.6.1.4.1.2356.800.3.2353.2.4.2.1.1`
gs2352pGVRPStatisticsJoinTxCnt	SNMPv2-SMICounter32 Constraints: `range: 0-3276700`	`.1.3.6.1.4.1.2356.800.3.2353.2.4.2.1.2`
gs2352pGVRPStatisticsLeaveTxCnt	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.4.2.1.3`

gs2352pMirrorTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.6.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMirrorTable'

gs2352pMirrorEntry row .1.3.6.1.4.1.2356.800.3.2353.2.6.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMirrorPort	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.2356.800.3.2353.2.6.2.1.1`
gs2352pMirrorMode default: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored	Enumerationr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.2356.800.3.2353.2.6.2.1.2`

gs2352pACLPortsConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.9.1 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pACLPortsConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pACLPortsConfTable'

gs2352pACLPortsConfEntry row .1.3.6.1.4.1.2356.800.3.2353.2.9.1.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pACLPortsConfPort

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.1

default: 0, range : 0 - 255

Integer32r/w

Enumerated Values:

0	any
1	arp
2	etype
3	icmp
4	ipv4
5	tcp
6	udp

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.2

gs2352pACLPortsConfAction

default: 1,
0: Deny
1: Permit

Enumerationr/w

Enumerated Values:

0	deny
1	permit

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.3

gs2352pACLPortsConfRateLimiterID

default: 0,
0: Disable
range : 0 - 12

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.4

gs2352pACLPortsConfPortRedirect

default: 0
0: Disable
range : 0 - end port number

Integer32r/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.5

gs2352pACLPortsConfLogging

default: 0
0: Disable
1: Enable

Enumerationr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.7

gs2352pACLPortsConfShutdown

default: 0
0: Disable
1: Enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.8

gs2352pACLPortsConfState

default: 1
0: Disable
1: Enable

Enumerationr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.9

gs2352pACLPortsConfCounter

Counts the number of frames that match this ACE.

gs2352pACLRateLimiterRate

Constraints:
range: 0-4094

.1.3.6.1.4.1.2356.800.3.2353.2.9.1.1.10

gs2352pACLRateLimiterTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.9.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pACLRateLimiterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pACLRateLimiterTable'

gs2352pACLRateLimiterEntry row .1.3.6.1.4.1.2356.800.3.2353.2.9.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pACLRateLimiterID

Rate Limiter ID.
range : 1-12

Integer32

Enumerated Values:

0	any
1	broadcast
2	unicast
3	multicast
4	macaddress

.1.3.6.1.4.1.2356.800.3.2353.2.9.2.1.1

default: 1,
range : <0-3276700> pps

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.2.1.3

gs2352pACLACETable

table

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2 · 1 row entry · 48 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pACLACETable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pACLACETable'

Create ACL ACE entry.

gs2352pACLACEEntry row .1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pACLACEIndex

Integer32

Enumerated Values:

0	notEqualSMAC
1	equalSMAC
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.1

gs2352pACLACEID

If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256.

Integer32r/w

Enumerated Values:

0	notEqualDMAC
1	equalDMAC
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.2

gs2352pACLACENextID

If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.3

gs2352pACLACEIngressPort

Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6.

gs2352pACLACEPortPolicyNumber

Constraints:
range: 0-3

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.4

policy value.
range : 0 - 255.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.5

gs2352pACLACEPortPolicyBitmask

policy bitmask.
range : 0 - 255(0xff).

Integer32r/w

Enumerated Values:

0	any
1	ip
2	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.6

gs2352pACLACEFrameType

0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.7

gs2352pACLACEAction

default: 1,
0: Deny
1: Permit

Enumerationr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.8

gs2352pACLACEDenyPortRedirect

Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6.

gs2352pACLACEVLANTagPriority

Enumerated Values:

0	any
1	ip
2	noData

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.9

gs2352pACLACELogging

default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.10

gs2352pACLACERateLimiter

default: 0,
0: Disable
range : 0 - 12

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.12

gs2352pACLACEShutdown

default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled.

Enumerationr/w

Constraints:
range: 0-257

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.13

Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.15

gs2352pACLACEVLANVID

Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094

Integer32r/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.16

gs2352pACLACEEtherType

0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff).

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.17

gs2352pACLACESMAC

Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care.

Constraints:
range: 0-257

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.18

gs2352pACLACEDMACType

DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
range : 0 - 4

Enumerationr/w

Constraints:
range: 0-257

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.19

gs2352pACLACEDMAC

Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must…

gs2352pACLACEArpFlagsRequestReply

Constraints:
range: 0-65536

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.20

gs2352pACLACEArpOpcode

Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4

Enumerationr/w

Constraints:
range: 0-65536

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.21

Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
…

Enumerationr/w

Constraints:
range: 0-65536

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.22

gs2352pACLACEArpFlagsArpSmac

Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SM…

Enumerationr/w

Constraints:
range: 0-65536

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.23

gs2352pACLACEArpFlagsRarpDmac

Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the …

Enumerationr/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.24

gs2352pACLACEArpFlagsLength

Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06)…

Integer32r/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.25

gs2352pACLACEArpFlagsIp

Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is …

Integer32r/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.26

gs2352pACLACEArpFlagsEthernet

Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is …

Integer32r/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.27

gs2352pACLACESIPType

Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 2

Enumerationr/w

Enumerated Values:

0	unset
1	set
2	any
3	noData

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.28

gs2352pACLACESIPIPAddress

A frame that hits this ACE matches this source IP address value.

gs2352pACLACESIPNetworkPrefix

Enumerated Values:

0	unset
1	set
2	any
3	noData

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.29

Network prefix.
default: 32,
0: No data.
range : 1 - 32

Integer32r/w

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.30

gs2352pACLACEDIPType

Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.32

gs2352pACLACEDIPIPAddress

A frame that hits this ACE matches this destination IP address value.

gs2352pACLACEDIPNetworkPrefix

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.33

Network prefix.
default: 32,
0: No data.
range : 1 - 32

Integer32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.34

gs2352pACLACEIPProtocol

Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.36

gs2352pACLACEIPFlagsTTL

Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0…

Integer32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.37

gs2352pACLACEIPFlagsOptions

Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.38

gs2352pACLACEIPFlagsFragment

Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater t…

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.39

gs2352pACLACEICMPType

Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.40

gs2352pACLACEICMPCode

Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.41

gs2352pACLACESourcePortMin

Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.42

gs2352pACLACESourcePortMax

Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.43

gs2352pACLACEDestPortMin

Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.44

gs2352pACLACEDestPortMax

Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.45

gs2352pACLACETCPFlagsFin

Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.46

gs2352pACLACETCPFlagsSyn

Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.47

gs2352pACLACETCPFlagsRst

Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.48

gs2352pACLACETCPFlagsPsh

Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.49

gs2352pACLACETCPFlagsAck

Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.50

gs2352pACLACETCPFlagsUrg

Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3

Enumerationr/w

Enumerated Values:

0	shutdown
1	shutdownLog
2	log

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.51

gs2352pACLACERowStatus

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.2.1.66

gs2352pACLACEStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6 · 1 row entry · 12 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pACLACEStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pACLACEStatusTable'

ACL ACE Status entry.

gs2352pACLACEStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1

Indexes

gs2352pLoopProtectionStatusPort

Column	Syntax	OID
gs2352pACLACEStatusIndex	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.1`
gs2352pACLACEStatusUser Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.2`
gs2352pACLACEStatusID ACE ID. range : 1 - 256.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.3`
gs2352pACLACEStatusIngressPort Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.	SNMPv2-TCDisplayString Constraints: `range: 0-1000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.4`
gs2352pACLACEStatusFrameType Indicates the frame type of the ACE.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.5`
gs2352pACLACEStatusAction Indicates the forwarding action of the ACE.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.6`
gs2352pACLACEStatusRateLimiter Indicates the rate limiter number of the ACE.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.7`
gs2352pACLACEStatusPortCopy Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.8`
gs2352pACLACEStatusMirror Specify the mirror operation of this port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.9`
gs2352pACLACEStatusCPU Forward packet that matched the specific ACE to CPU.	SNMPv2-TCDisplayString Constraints: `range: 1-4094` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.10`
gs2352pACLACEStatusCounter The counter indicates the number of times the ACE was hit by a frame.	SNMPv2-SMICounter32 Constraints: `range: 0-4`	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.11`
gs2352pACLACEStatusConflict Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.9.3.6.1.12`

gs2352pLoopProtectionConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.12.1.4 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLoopProtectionConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLoopProtectionConfigurationTable'

Show Loop Protection configurations.

gs2352pLoopProtectionConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.12.1.4.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pLoopProtectionConfPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.12.1.4.1.1`
gs2352pLoopProtectionConfEnable Configure loop protection port mode. 0: disable, 1: enable, default: enable.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.12.1.4.1.2`
gs2352pLoopProtectionConfAction Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.12.1.4.1.3`
gs2352pLoopProtectionConfTxmode Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.12.1.4.1.4`

gs2352pLoopProtectionStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.12.2 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLoopProtectionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLoopProtectionStatusTable'

Show Loop Protection Status.

gs2352pLoopProtectionStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.12.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pLoopProtectionStatusPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.1

gs2352pLoopProtectionStatusAction

The currently configured port action.

gs2352pLoopProtectionStatusTransmit

Constraints:
range: 0-300

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.2

The currently configured port transmit mode.

gs2352pLoopProtectionStatusLoops

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.3

The number of loops detected on this port.

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.4

gs2352pLoopProtectionStatusStatus

The current loop protection status of the port.

gs2352pLoopProtectionStatusLoop

Constraints:
range: 1-4094

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.5

Whether a loop is currently detected on the port.

gs2352pLoopProtectionStatusTimeLastLoop

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.6

The time of the last loop event detected.

gs2352pPoeStatusLocalPort

Constraints:
range: 10-120

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.12.2.1.7

gs2352pPoeStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1 · 1 row entry · 8 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoeStatusTable'

Configure PoE Scheduling Table.

gs2352pPoeStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1

Indexes

No indexes recorded

Column Syntax OID

port, range : 1 - port number.

Integer32

Enumerated Values:

0	nothing
1	reboot

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.1

gs2352pPoeStatusPDclass

Indicates the QCL user.
0: Max. power 15.4 W,
1: Max. power 4.0 W,
2: Max. power 7.0 W,
3: Max. power 15.4 W,
4: Max. power 30.0 W.

Integer32

Constraints:
range: 3-120

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.2

gs2352pPoeStatusPowerRequested

The Power Requested shows the requested amount of power the PD wants to be reserved.

gs2352pPoeStatusPowerAllocated

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.3

The Power Allocated shows the amount of power the switch has allocated for the PD.

gs2352pPoeStatusPowerUsed

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.4

The Power Used shows how much power the PD currently is using.

gs2352pPoeStatusCurrentUsed

Constraints:
range: 1-4094

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.5

The Power Used shows how much current the PD currently is using.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.6

gs2352pPoeStatusPriority

The Priority shows the port's priority configured by the user.

gs2352pPoeStatusPortStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.7

The Port Status shows the port's status.

gs2352pPoeAutoCheckPingIPAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.1.1.1.8

gs2352pPoePowerDelayTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoePowerDelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoePowerDelayTable'

Configure PoE Power Delay mode.

gs2352pPoePowerDelayEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.2.1.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pPoePowerDelayPort

port, range : 1 - port number.

Integer32

Constraints:
range: 1-24

.1.3.6.1.4.1.2356.800.3.2353.2.13.2.1.1.1

gs2352pPoePowerDelayMode

Turn on / off the power delay function,
0: disable,
1: enable,
default: disable.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.13.2.1.1.2

gs2352pPoePowerDelayTime

set Delay Time,
default: 0,
range: 0-300 sec.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.13.2.1.1.3

gs2352pPoeAutoCheckTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoeAutoCheckTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoeAutoCheckTable'

Configure PoE Power Delay mode.

gs2352pPoeAutoCheckEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pPoeAutoCheckPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.1

IP Address the system should ping.
default: 0.0.0.0 .

gs2352pPoeAutoCheckIntervalTime

Enumerated Values:

0	low
1	high
2	critical

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.2

Device will send checking message to PD each interval time.
default: 30,
range: 10-120 sec.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.3

gs2352pPoeAutoCheckRetryTime

It will retry to send detection again.
default: 3,
range: 1-5.

Integer32r/w

Constraints:
range: 0-5

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.4

gs2352pPoeAutoCheckFailureLog

Failure loggings counter.

gs2352pPoeAutoCheckFailureAction

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.5

It will retry to send detection again,
0: Nothing,
1: Reboot Remote PD,
default: Nothing.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.6

gs2352pPoeAutoCheckRebootTime

When PD has been rebooted, the PoE port restored power after the specified time.
default: 15,
range: 3-120 sec.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.13.3.2.1.7

gs2352pPoeSchedulingTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoeSchedulingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoeSchedulingTable'

Configure PoE Scheduling Table.

gs2352pPoeSchedulingEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.4.1.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pPoeSchedulingPort port, range : 1 - port number.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.2356.800.3.2353.2.13.4.1.1.1`
gs2352pPoeSchedulingStatus PoE Scheduling Status. 0: Disable, 1: Enable, default: Disable.	Enumerationr/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2356.800.3.2353.2.13.4.1.1.2`

gs2352pPoeSchedulingTimeTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.2 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoeSchedulingTimeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoeSchedulingTimeTable'

Show Poe Scheduling Time Config.

gs2352pPoeSchedulingTimeEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.4.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pPoeSchedulingTimePort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.2.1.1

gs2352pPoeSchedulingTimeWeek

range: 1-7,
Sunday:7, Monday:1, Tuseday:2, Wednesday:3, Thursday:4, Friday:5, Saturday:6.

Enumeration

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.2.1.2

gs2352pPoeSchedulingTimeHour

range: 1-24,
24: hour 0, 1: hour 1, 2: hour2...

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.2.1.3

gs2352pPoeSchedulingProvidePower

0: disable,
1: enable,
default: disable.

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.13.4.2.1.4

gs2352pPoeConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPoeConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPoeConfigurationTable'

Configure PoE Configuration mode.

gs2352pPoeConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pPoeConfigurationPort

port, range : 1 - port number.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.1

gs2352pPoeConfigurationPoEMode

The PoE Mode represents the PoE operating mode for the port.
0: Disable,
1: Enable,
default: Enable.

Enumerationr/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.2

gs2352pPoeConfigurationPriority

The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical.
0: Low,
1: High,
2: Critical,
default: Low.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.3

gs2352pPoeConfigurationMaximumPower

The Maximum Power value contains a numerical value that indicates the maximum
power in watts that can be delivered to a remote device.
default: 15.4[W],
max: 30[W].

gs2352pPoeConfigurationDetection

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.4

Configure PoE port capacitor detection.
0: No Detection(read only),
1: legacy,
2: 4-point,
3: 4-point-legacy,
4: 2-point,
5: 2-point-legacy,
default: 4-point.

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.5

gs2352pPoeConfigurationReset

Reset the specific PoE port.
0: Disable,
1: Enable,
default: Disable.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.13.5.3.1.6

gs2352pQosPortClassificationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortClassificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortClassificationTable'

QoS Ingress Port Classification .

gs2352pQosPortClassificationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosPortClassificationPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.1

gs2352pQosPortClassificationQoSclass

Controls the default QoS class, i.e., the QoS class
for frames not classified in any other way. There is
a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
Note:…

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.2

gs2352pQosPortClassificationDPlevel

DP level for frames not classified in any other way.
range: 0-3,
default: 0.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.3

gs2352pQosPortClassificationPCP

Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame.
range: 0-7,
default: 0.

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.4

gs2352pQosPortClassificationDEI

Drop Eligible Indicator. It is a 1-bit field in the VLAN.
range 0-1,
default: 0.

Enumerationr/w

Enumerated Values:

0	strictPriority
1	weighted

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.5

gs2352pQosPortClassificationTagClass

Configure the classification mode for tagged frames.
0: Disable,
1: Enable,
default: Disable.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.6

gs2352pQosPortClassificationDSCPBased

Click to Enable DSCP Based QoS Ingress Port Classification.
0: disable,
1: enable,
default: disable.

Enumerationr/w

Constraints:
range: 100-1000000

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.1.1.7

gs2352pQoSIngressPortTagClassificationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQoSIngressPortTagClassificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQoSIngressPortTagClassificationTable'

Show QoS Ingress Port Tag Classification.

gs2352pQoSIngressPortTagClassificationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1

Indexes

gs2352pQosSchedulerPort gs2352pQosSchedulerPortQueue

Column Syntax OID

gs2352pQoSIngressPortTagClassificationPort

port, range : 1 - port number.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1.1

gs2352pQoSIngressPortTagPCP

range: 1-8,
PCP0:1, PCP1:2...

Enumeration

Enumerated Values:

1	q0
2	q1
3	q2
4	q3
5	q4
6	q5
7	q6
8	q7

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1.2

gs2352pQoSIngressPortTagDEI

range: 1-2,
DEI0:1, DEI1:2.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1.3

gs2352pQoSIngressPortTagQosClass

range: 0-7.

Integer32r/w

Constraints:
range: 100-1000000

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1.4

gs2352pQoSIngressPortTagDPLevel

range: 0-3.

Integer32r/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.1.2.1.5

gs2352pQosPortPolicingTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortPolicingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortPolicingTable'

configure the Policer settings for all switch ports.

gs2352pQosPortPolicingEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosPortPolicingPort

port, range : 1 - port number.

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.14.2.1.1

gs2352pQosPortPolicingMode

Controls whether the policer is enabled on this switch port.
0: disable,
1: enable,
default: disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.2.1.2

gs2352pQosPortPolicingRate

Controls the rate for the policer.
range: 100-10000000(kbps/fps),
default: 500(kbps).

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.14.2.1.3

gs2352pQosPortPolicingUnit

Controls the unit of measure for the policer rate.
0: kbps,
1: fps,
default: kbps.

Enumerationr/w

Enumerated Values:

0	classified
1	default
2	mapped

.1.3.6.1.4.1.2356.800.3.2353.2.14.2.1.4

gs2352pQosPortPolicingFlowControl

If flow control is enabled and the port is in flow control mode,
then pause frames are sent instead of discarding frames.
0: disable,
1: enable,
default: disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.2.1.5

gs2352pQosPortSchedulerModeTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.1 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortSchedulerModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortSchedulerModeTable'

configure the basic QoS Port Scheduler Mode settings for all switch ports.

gs2352pQosPortSchedulerModeEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.3.1.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosSchedulerModePort

port, range : 1 - port number.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.1.1.1

gs2352pQosSchedulerMode

Controls whether the scheduler mode is Strict Priority or Weighted
on this switch port.
0:Strict Priority
1:Weighted
default: Strict Priority.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.1.1.2

gs2352pQosSchedulerShaper

Controls whether the port shaper is enabled
0: Disable
1: Enable.
default: disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.1.1.3

gs2352pQosSchedulerShaperRate

Controls the rate for the port shaper.
range: 100-1000000
default: 500 kbps.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.1.1.4

gs2352pQosPortSchedulerTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortSchedulerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortSchedulerTable'

Show Qos Port Scheduler.

gs2352pQosPortSchedulerEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosSchedulerPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.1

gs2352pQosSchedulerPortQueue

range: 1-8.
Q0: 1, Q1: 2, ...

Enumeration

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.2

gs2352pQosSchedulerPortQueueShaper

0: disable 1:enable,
default: 0.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.3

gs2352pQosSchedulerPortQueueShaperRate

range: 100..1000000 kbps.

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.4

gs2352pQosSchedulerPortQueueShaperExcess

0: disable 1:enable,
default: 0.

Enumerationr/w

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5
7	class6
8	class7

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.5

gs2352pQosSchedulerPortQueueSchedulerWeight

range: 1-100,
default: 17.
Only use in Q0 - Q5. Q6 & Q7 show 0

Integer32r/w

Enumerated Values:

1	level0
2	level1

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.6

gs2352pQosSchedulerPortQueueSchedulerPercent

Only use in Q0 - Q5. Q6 & Q7 show empty

gs2352pQosEgressTagRemarkingDefPort

Constraints:
range: 0-7

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.3.2.1.7

gs2352pQosPortEgressTagRemarkingTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortEgressTagRemarkingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortEgressTagRemarkingTable'

configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.

gs2352pQosPortEgressTagRemarkingEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.4.1.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pQosEgressTagRemarkingPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.14.4.1.1.1`
gs2352pQosEgressTagRemarkingMode the tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level.	Enumerationr/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.14.4.1.1.2`

gs2352pQosPortEgressTagRemarkingDefTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortEgressTagRemarkingDefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortEgressTagRemarkingDefTable'

configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.

gs2352pQosPortEgressTagRemarkingDefEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.4.2.1

Indexes

No indexes recorded

Column Syntax OID

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable
2	remap

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.2.1.1

gs2352pQosEgressTagRemarkingDefPCP

Controls the default PCP
Range : 0-7

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.2.1.2

gs2352pQosEgressTagRemarkingDefDEI

controls the DEI
Range 0-1

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.2.1.3

gs2352pQosPortEgressTagRemarkingMapDPTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.3 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortEgressTagRemarkingMapDPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortEgressTagRemarkingMapDPTable'

Show Qos Port Egress Tag Remarking Map DP.

gs2352pQosPortEgressTagRemarkingMapDPEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.4.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosPortEgressTagRemarkingDPPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.3.1.1

gs2352pQosPortEgressTagRemarkingClassifiedDPLevel

range: 1-4.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.3.1.2

gs2352pQosPortEgressTagRemarkingDPLevel

range: 0-1.

Enumerationr/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.3.1.3

gs2352pQosPortEgressTagRemarkingMapTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortEgressTagRemarkingMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortEgressTagRemarkingMapTable'

Show Qos Port Egress Tag Remarking Map.

gs2352pQosPortEgressTagRemarkingMapEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1

Indexes

gs2352pQosDSCPTranslationList

Column Syntax OID

gs2352pQosPortEgressTagRemarkingMapPort

port, range : 1 - port number.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1.1

gs2352pQosTagRemarkingQoSClass

range: 1-8,
QoS Class0: 1, QoS Class1: 2...

Enumeration

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1.2

gs2352pQosTagRemarkingDPLevel

range: 1-2,
DP Level0: 1, DP Level1: 2.

Enumeration

Constraints:
range: 0-63

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1.3

gs2352pQosTagRemarkingPCP

range: 0-7.

Integer32r/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1.4

gs2352pQosTagRemarkingDEI

range: 0-1.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2356.800.3.2353.2.14.4.4.1.5

gs2352pQosPortDSCPTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.5 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosPortDSCPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosPortDSCPTable'

configure the basic QoS Port DSCP Configuration settings for all switch ports.

gs2352pQosPortDSCPEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.5.1

Indexes

gs2352pQosDSCPClassificationQoSClass

Column Syntax OID

gs2352pQosPortDSCPPort

port, range : 1 - port number.

Integer32

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5
7	class6
8	class7

.1.3.6.1.4.1.2356.800.3.2353.2.14.5.1.1

gs2352pQosPortDSCPIngressTranslate

Configure DSCP ingress translation mode.
0: disable,
1: enable,
default: disable.

Enumerationr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2356.800.3.2353.2.14.5.1.2

gs2352pQosPortDSCPIngressClassify

Classification for a port have 4 different values.
range: 0-3,
0: disable,No Ingress DSCP Classification.
1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0.
2: Selected,Classify only selected DSCP for …

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.5.1.3

gs2352pQosPortDSCPEgressRewrite

Configure the port egress rewriting mode.
range: 0-2
0: Disable,No Egress rewrite.
1: Enable, Rewrite enabled without remapping.
2: Remap , DSCP from analyzer is remapped and frame is remarked with
remapped DSCP valu…

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.5.1.4

gs2352pQosDSCPTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.6 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosDSCPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosDSCPTable'

configure the basic QoS DSCP based QoS Ingress Classification settings for all switches.

gs2352pQosDSCPEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.6.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pQosDSCPList DSCP mapping table index(1-64).	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.2356.800.3.2353.2.14.6.1.1`
gs2352pQosDSCP Maximum number of supported DSCP values are 64.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.14.6.1.2`
gs2352pQosDSCPTrust Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame. 0…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.14.6.1.3`
gs2352pQosDSCPQosClass QoS class. range: 0-7, default: 0.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.14.6.1.4`
gs2352pQosDSCPDPL Drop Precedence Level. range: 0-3, default: disable.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.14.6.1.5`

gs2352pQosDSCPTranslationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.7 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosDSCPTranslationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosDSCPTranslationTable'

configure the basic QoS DSCP Translation settings for all switches.

gs2352pQosDSCPTranslationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.7.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosDSCPTranslationList

DSCP translation table index(1-64).

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.14.7.1.1

gs2352pQosDSCPTranslationDSCPBasedId

Configure global ingress DSCP translation table.

gs2352pQosDSCPTranslationIngressTranslate

Enumerated Values:

1	any
2	ethernet
3	llc
4	snap
5	ipv4
6	ipv6

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.7.1.2

DSCP at Ingress side can be translated to any of DSCP values.
range: 0-63,
default: 0.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.7.1.3

gs2352pQosDSCPTranslationIngressClassify

Configure DSCP ingress classification.
0: disable,
1: enable,
default: disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.7.1.4

gs2352pQosDSCPTranslationEgressRemap

Select the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.7.1.5

gs2352pQosDSCPClassificationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.8 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosDSCPClassificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosDSCPClassificationTable'

configure the mapping of QoS class  to DSCP value.

gs2352pQosDSCPClassificationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.8.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pQosDSCPClassificationQoSClass Actual QoS class. Index 1~8 mean Qos Class 0~7.	Enumeration	`.1.3.6.1.4.1.2356.800.3.2353.2.14.8.1.1`
gs2352pQosDSCPClassificationDSCP Select the classified DSCP value. range: 0-63, default: 0.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.2356.800.3.2353.2.14.8.1.3`

gs2352pQosQceTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2 · 1 row entry · 39 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosQceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosQceTable'

Create Qos QCE entry.

gs2352pQosQceEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosQceIndex

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.1

gs2352pQosQceID

If the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a
new QCE will be added.
range : 1 - 256.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.2

gs2352pQosQceNextID

If the next QCE ID is non zero, the QCE will be placed
before this QCE in the list. If the next QCE ID is zero,
the QCE will be placed last in the list.
range : 1 - 256.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.3

gs2352pQosQcePortMembers

Indicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port.
Port: The QCE will match a specific ingress port.Format: 1,3-6.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.4

gs2352pQosQceTag

Value of Tag field can be 'Any', 'Untag' or 'Tag'.

Enumerated Values:

0	any
1	no
2	yes

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.5

gs2352pQosQceVID

Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.6

gs2352pQosPCP

Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.7

gs2352pQosDEI

Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.8

gs2352pQosSMAC

Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.9

gs2352pQosDMACType

Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.10

gs2352pQosFrameType

Frame Type can have any of the following values:
1: Any,
2: Ethernet,
3: LLC,
4: SNAP,
5: IPv4,
6: IPv6.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.11

gs2352pQosMacEtherType

Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.12

gs2352pQosLLCSSAPAddr

Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.13

gs2352pQosLLCDSAPAddr

Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.14

gs2352pQosLLCControl

Valid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.15

gs2352pQosSNAPPID

Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
range: 0000-FFFF,
default: Any.

Constraints:
range: 0-8

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.16

gs2352pQosIpv4Protocol

IP protocol number: (Other, TCP or UDP) or 'Any'.

gs2352pQosIpv4ProtocolValue

Constraints:
range: 0-4

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.17

Ipv4 Protocol is Other.
range: 0-255
default: 0.

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.18

gs2352pQosIpv4ProtocolUDPSport

Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv4ProtocolUDPDport

Enumerated Values:

1	active
2	notInservice
4	destroy

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.19

Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv4ProtocolTCPSport

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.20

Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv4ProtocolTCPDport

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.21

Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

Constraints:
range: 1-4095

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.22

gs2352pQosIpv4SourceIp

Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.23

gs2352pQosIpv4SourceMask

Specific Source IP address in mask format or value 0.0.0.0 is 'Any'.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.24

gs2352pQosIpv4IPFragment

IPv4 frame fragmented option:
2: yes,
1: no,
0: any.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.25

gs2352pQosIpv4DSCP

Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.26

gs2352pQosIpv6Protocol

IP protocol number: (Other, TCP or UDP) or 'Any'.

gs2352pQosIpv6ProtocolValue

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.27

when IPv6 protocol is Other ,
range: 0-255.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.28

gs2352pQosIpv6ProtocolUDPSport

Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv6ProtocolUDPDport

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.29

Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv6ProtocolTCPSport

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.30

Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

gs2352pQosIpv6ProtocolTCPDport

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.31

Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.32

gs2352pQosIpv6SourceIp

IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.

Constraints:
range: 1-4095

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.33

gs2352pQosIpv6SourceMask

IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.34

gs2352pQosIpv6DSCP

Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63 including BE,
CS1-CS7, EF or AF11-AF43.

Constraints:
range: 100-10000000

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.35

gs2352pQosActionClass

QoS class: (0-7) or 8: Default.

Integer32r/w

Enumerated Values:

0	kbps
1	fps

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.36

gs2352pQosActionDPL

DP Valid Drop Precedence Level can be (0-3) or 4: Default.

Integer32r/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.37

gs2352pQosActionDSCP

Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.

Integer32r/w

Constraints:
range: 100-10000000

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.38

gs2352pQosQceRowStatus

1: active 2: notInservice 4: destroy

Enumerationr/w

Enumerated Values:

0	kbps
1	fps

.1.3.6.1.4.1.2356.800.3.2353.2.14.9.2.1.39

gs2352pQosQCLStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.10 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosQCLStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosQCLStatusTable'

configure the basic QoS DSCP Translation settings for all switches.

gs2352pQosQCLStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.10.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pQosQCLStatusList

QCL table index.

Integer32

Enumerated Values:

0	kbps
1	fps

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.1

gs2352pQosQCLStatusUser

Indicates the QCL user.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.2

gs2352pQosQCLStatusQCEId

Indicates the index of QCE.

gs2352pQosQCLStatusFrameType

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.3

Indicates the type of frame to look for incomming frames.
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only…

gs2352pQosQCLStatusPortlist

Constraints:
range: 1-6

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.4

Indicates the list of ports configured with the QCE.

gs2352pQosQCLStatusActionClass

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.5

Classified QoS class; if a frame matches the QCE it will be put in the
queue.

gs2352pQosQCLStatusActionDPL

Constraints:
range: 0-100

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.6

Drop Precedence Level; if a frame matches the QCE then DP level will
set to value displayed under DPL column.

gs2352pQosQCLStatusActionDSCP

Constraints:
range: 0-100

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.7

If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.

gs2352pQosQCLStatusActionConflict

Constraints:
range: 0-100

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.8

If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.

gs2352pQosStormControlPort

Constraints:
range: 0-100

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.14.10.1.9

gs2352pQosStormControlTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1 · 1 row entry · 10 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosStormControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosStormControlTable'

configure the basic QoS DSCP Translation settings for all switches.

gs2352pQosStormControlEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1

Indexes

gs2352pVlanPortsPort

Column Syntax OID

port, range : 1 - port number.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.1

gs2352pQosStormControlUnicastEnabled

Controls whether the storm control is enabled on this switch port.
0: disable,
1: enable,
default: disable.

Enumerationr/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.2

gs2352pQosStormControlUnicastRate

Controls the rate for the unicast storm control.
range: 100-10000000(kbps/fps),
default: 500(kbps).

Integer32r/w

Enumerated Values:

0	all
1	tagged
2	untagged

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.3

gs2352pQosStormControlUnicastUnit

Controls the unit of measure for the unicast storm control rate.
0: kbps,
1: fps,
default: kbps.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.4

gs2352pQosStormControlBroadcastEnabled

Controls whether the storm control is enabled on this switch port.
0: disable,
1: enable,
default: disable.

Enumerationr/w

Enumerated Values:

0	access
1	hybrid
2	trunk

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.5

gs2352pQosStormControlBroadcastRate

Controls the rate for the broadcast storm control.
range: 100-10000000(kbps/fps),
default: 500(kbps).

Integer32r/w

Enumerated Values:

0	cPort
1	sCustomPort
2	sPort
3	unaware

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.6

gs2352pQosStormControlBroadcastUnit

Controls the unit of measure for the broadcast storm control rate.
0: kbps,
1: fps,
default: kbps.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.7

gs2352pQosStormControlUnknownEnabled

Controls whether the storm control is enabled on this switch port.
0: disable,
1: enable,
default: disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.8

gs2352pQosStormControlUnknownRate

Controls the rate for the multicast storm control.
range: 100-10000000(kbps/fps),
default: 500(kbps).

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.9

gs2352pQosStormControlUnknownUnit

Controls the unit of measure for the multicast storm control rate.
0: kbps,
1: fps,
default: kbps.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.14.11.1.1.10

gs2352pQosWREDTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.14.12 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pQosWREDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pQosWREDTable'

configure the Random Early Detection (RED) settings for queue.

gs2352pQosWREDEntry row .1.3.6.1.4.1.2356.800.3.2353.2.14.12.1

Indexes

gs2352pMACbasedVLANIndex

Column Syntax OID

gs2352pQosWREDQueueList

The queue number (QoS class) for which the configuration below applies.
Index 1~6 mean Queue 0~5.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.1

gs2352pQosWREDQueue

Controls whether RED(Random Early Detection) for this queue.
0: Disable,
1: Enable,
default: Disable.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.2

gs2352pQosWREDMinThreshold

Controls the lower RED(Random Early Detection) threshold.
If the average queue filling level is below this threshold, the drop
probability is zero.
range: 0-100

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.3

gs2352pQosWREDMaxDP1

Controls the drop probability for frames marked with Drop Precedence
Level 1 when the average queue filling level is 100%.
range: 0-100,
default: 1.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.4

gs2352pQosWREDMaxDP2

Controls the drop probability for frames marked with Drop Precedence
Level 2 when the average queue filling level is 100%.
range: 0-100,
default: 5.

Integer32r/w

Enumerated Values:

1	active
2	notInservice
4	destroy

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.5

gs2352pQosWREDMaxDP3

Controls the drop probability for frames marked with Drop Precedence
Level 3 when the average queue filling level is 100%.
range: 0-100,
default: 10.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.2.14.12.1.6

gs2352pVlanPortsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pVlanPortsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pVlanPortsTable'

Configure Vlan ports Configuration mode.

gs2352pVlanPortsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pVlanPortsPort

port, range : 1 - port number.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.1

gs2352pVlanPortsNativeVLAN

Configure native VLAN ID.
range: 1-4094,
default: 1.

Integer32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.2

gs2352pVlanPortsFrameType

Configure frame type of switch ports.
0: all,
1: tagged,
2: untagged,
default: all.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.3

gs2352pVlanPortsIngressFilter

Configure ingress filtering of switch ports.
0: disable,
1: enable,
default:disable .

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.4

gs2352pVlanPortsEgressRule

Configure egress-rule of switch ports.
0: access,
1: hybrid,
2: trunk

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.5

gs2352pVlanPortsPortType

Configure port type of switch ports.
0: c-port,
1: s-custom-port,
2: s-port,
3: unaware.
default: c-port.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.15.1.2.1.6

gs2352pVlanPortIsolationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.15.2.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pVlanPortIsolationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pVlanPortIsolationTable'

Configure Vlan Port Isolation Configuration.

gs2352pVlanPortIsolationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.15.2.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pVlanPortIsolationPort port, range : 1 - port number.	Integer32 Constraints: `range: -1--1` `range: 1-255`	`.1.3.6.1.4.1.2356.800.3.2353.2.15.2.2.1.1`
gs2352pVlanPortIsolation default: 0 0:disable 1:enable	Enumerationr/w Constraints: `range: -1--1` `range: 1-31744`	`.1.3.6.1.4.1.2356.800.3.2353.2.15.2.2.1.2`

gs2352pMACbasedVLANConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMACbasedVLANConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMACbasedVLANConfTable'

Configure Vlan Port Isolation Configuration.

gs2352pMACbasedVLANConfEntry row .1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMACbasedVLANIndex Indicates the VLAN ID.	Integer32r/w Constraints: `range: -1-31744`	`.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1.1`
gs2352pMACbasedVLANMACAddress Indicates the MAC address. The CreateEntry can be modify, the other entry can't be modify.	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1.2`
gs2352pMACbasedVLANID Indicates the VLAN ID.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1.3`
gs2352pMACbasedMemberships The ports are displayed for each MAC-based VLAN entry. To include the port in a MAC-based VLAN	SNMPv2-TCDisplayStringr/w Constraints: `range: 1-65535` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1.4`
gs2352pMACbaseRowStatus 1: active 2: notInservice 4: destroy	Enumerationr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.15.3.1.2.1.5`

gs2352pIGMPSnoopingPortRelatedTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.1.6 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingPortRelatedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingPortRelatedTable'

Configure IGMP Snooping Port Related Configuration.

gs2352pIGMPSnoopingPortRelatedEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.1.6.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingRouterPort Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the wh…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.1.6.1.1`
gs2352pIGMPSnoopingFastLeave Enable/Disable the fast leave on the port.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.1.6.1.2`
gs2352pIGMPSnoopingThrottling Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.1.6.1.3`

gs2352pIGMPSnoopingVLANTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingVLANTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingVLANTable'

Configure IGMP Snooping Vlan Configuration.

gs2352pIGMPSnoopingVLANEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingVLANID The VLAN ID of the entry	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.1`
gs2352pIGMPSnoopingVLANEnable Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.2`
gs2352pIGMPSnoopingVLANIGMPQuerier Enable/Disable the IGMP Querier in the VLAN.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.3`
gs2352pIGMPSnoopingVLANCompatibility Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IG…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.4`
gs2352pIGMPSnoopingVLANRV Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.5`
gs2352pIGMPSnoopingVLANQI Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.6`
gs2352pIGMPSnoopingVLANQRI Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response …	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.7`
gs2352pIGMPSnoopingVLANLLQI LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 i…	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.8`
gs2352pIGMPSnoopingVLANURI Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report int…	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.2.1.9`

gs2352pIGMPSnoopingPortGroupFilteringTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.3.2 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingPortGroupFilteringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingPortGroupFilteringTable'

Configure IGMP Snooping port group filtering.

gs2352pIGMPSnoopingPortGroupFilteringEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.3.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingPortGroupFilteringIndex IGMP Snooping Port Group Filtering Configuration Index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.16.3.2.1.1`
gs2352pIGMPSnoopingPortGroupFilteringPort The logical port for the settings.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.3.2.1.2`
gs2352pIGMPSnoopingPortGroupFilteringGroups The IP Multicast Group that will be filtered.	SNMPv2-TCDisplayStringr/w Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.3.2.1.3`
gs2352pIGMPSnoopingPortGroupFilteringRowStatus 1: active 2: notInservice 4: destroy	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.16.3.2.1.4`

gs2352pIGMPSnoopingstatisticTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2 · 1 row entry · 10 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingstatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingstatisticTable'

Configure Vlan Port Isolation Configuration.

gs2352pIGMPSnoopingstatisticEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingstatisticVLANID The VLAN ID of the entry.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.1`
gs2352pIGMPSnoopingstatisticQuerierVersion Working Querier Version currently.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.2`
gs2352pIGMPSnoopingstatisticHostVersion Working Host Version currently.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.3`
gs2352pIGMPSnoopingstatisticQuerierStatus Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.4`
gs2352pIGMPSnoopingstatisticQueriesTransmitted The number of Transmitted Queries.	SNMPv2-SMICounter32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.5`
gs2352pIGMPSnoopingstatisticQueriesReceived The number of Received Queries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.6`
gs2352pIGMPSnoopingstatisticV1ReportsReceived The number of Received V1 Reports.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.7`
gs2352pIGMPSnoopingstatisticV2ReportsReceived The number of Received V2 Reports.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.8`
gs2352pIGMPSnoopingstatisticV3ReportsReceived The number of Received V3 Reports.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.9`
gs2352pIGMPSnoopingstatisticV2LeavesReceived The number of Received V2 Leaves.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.2.1.10`

gs2352pIGMPSnoopingRouterPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.4.3 · 1 row entry · 1 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingRouterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingRouterPortTable'

Configure Vlan Port Isolation Configuration.

gs2352pIGMPSnoopingRouterPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.4.3.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingRouterPortStatus Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port…	SNMPv2-TCDisplayString Constraints: `range: 0-10` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.4.3.1.1`

gs2352pIGMPSnoopingGroupsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.5 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingGroupsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingGroupsTable'

IGMP Snooping Groups Information .

gs2352pIGMPSnoopingGroupsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.5.1

Indexes

gs2352pMLDSnoopingVLANID

Column Syntax OID

gs2352pIGMPSnoopingGroupsIndex

IGMP Snooping Groups Index

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.16.5.1.1

gs2352pIGMPSnoopingGroupsVLANID

VLAN ID of the group.

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.16.5.1.2

gs2352pIGMPSnoopingGroups

Group address of the group displayed.

gs2352pIGMPSnoopingGroupsMemberships

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.16.5.1.3

Ports under this group.

gs2352pMLDSnoopingGroupsIndex

Enumerated Values:

0	mldAuto
1	forcedMLDv1
2	forcedMLDv2
3	none

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.16.5.1.4

gs2352pIGMPSnoopingSSMTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.16.6 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIGMPSnoopingSSMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIGMPSnoopingSSMTable'

The IGMP SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry.

gs2352pIGMPSnoopingSSMEntry row .1.3.6.1.4.1.2356.800.3.2353.2.16.6.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIGMPSnoopingSSMIndex IGMP Snooping SSM Index	Integer32 Constraints: `range: -1-31744`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.1`
gs2352pIGMPSnoopingSSMVLANID VLAN ID of the group.	Integer32 Constraints: `range: -1-31744`	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.2`
gs2352pIGMPSnoopingSSMGroup Group address of the group displayed.	SNMPv2-TCDisplayString Constraints: `range: -1-31744` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.3`
gs2352pIGMPSnoopingSSMPort Ports under this group.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.4`
gs2352pIGMPSnoopingSSMMode Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.5`
gs2352pIGMPSnoopingSSMSourceAddress IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.6`
gs2352pIGMPSnoopingSSMType Indicates the Type. It can be either Allow or Deny.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.16.6.1.7`

gs2352pMLDSnoopingPortRelatedTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.1.6 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingPortRelatedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingPortRelatedTable'

Configure MLD Snooping Port Related Configuration.

gs2352pMLDSnoopingPortRelatedEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.1.6.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMLDSnoopingRouterPort Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the wh…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.1.6.1.1`
gs2352pMLDSnoopingFastLeave Enable/Disable the fast leave on the port.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.1.6.1.2`
gs2352pMLDSnoopingThrottling Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.1.6.1.3`

gs2352pMLDSnoopingVLANTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingVLANTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingVLANTable'

Configure MLD Snooping Vlan Configuration.

gs2352pMLDSnoopingVLANEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMLDSnoopingVLANID The VLAN ID of the entry	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.1`
gs2352pMLDSnoopingVLANEnable Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD Snooping.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.2`
gs2352pMLDSnoopingVLANIGMPQuerier Enable/Disable the MLD Querier in the VLAN.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.3`
gs2352pMLDSnoopingVLANCompatibility Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv…	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.4`
gs2352pMLDSnoopingVLANRV Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.5`
gs2352pMLDSnoopingVLANQI Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.6`
gs2352pMLDSnoopingVLANQRI Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response …	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.7`
gs2352pMLDSnoopingVLANLLQI LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in…	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.8`
gs2352pMLDSnoopingVLANURI Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report int…	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.2.1.9`

gs2352pMLDSnoopingPortGroupFilteringTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.3.2 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingPortGroupFilteringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingPortGroupFilteringTable'

Configure MLD Snooping port group filtering.

gs2352pMLDSnoopingPortGroupFilteringEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.3.2.1

Indexes

Column	Syntax	OID
gs2352pMLDSnoopingPortGroupFilteringIndex MLD Snooping Port Group Filtering Configuration Index.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.3.2.1.1`
gs2352pMLDSnoopingPortGroupFilteringPort The logical port for the settings.	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.3.2.1.2`
gs2352pMLDSnoopingPortGroupFilteringGroups The IP Multicast Group that will be filtered.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.3.2.1.3`
gs2352pMLDSnoopingPortGroupFilteringRowStatus 1: active 2: notInservice 4: destroy	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.17.3.2.1.4`

gs2352pMLDSnoopingstatisticTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingstatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingstatisticTable'

Configure Vlan Port Isolation Configuration.

gs2352pMLDSnoopingstatisticEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1

Indexes

gs2352pMLDSnoopingSSMIndex

Column	Syntax	OID
gs2352pMLDSnoopingstatisticVLANID The VLAN ID of the entry.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.1`
gs2352pMLDSnoopingstatisticQuerierVersion Working Querier Version currently.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.2`
gs2352pMLDSnoopingstatisticHostVersion Working Host Version currently.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.3`
gs2352pMLDSnoopingstatisticQuerierStatus Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.4`
gs2352pMLDSnoopingstatisticQueriesTransmitted The number of Transmitted Queries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.5`
gs2352pMLDSnoopingstatisticQueriesReceived The number of Received Queries.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.6`
gs2352pMLDSnoopingstatisticV1ReportsReceived The number of Received V1 Reports.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.7`
gs2352pMLDSnoopingstatisticV2ReportsReceived The number of Received V2 Reports.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.8`
gs2352pMLDSnoopingstatisticV1LeavesReceived The number of Received V1 Leaves.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.4.2.1.9`

gs2352pMLDSnoopingRouterPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.4.3 · 1 row entry · 1 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingRouterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingRouterPortTable'

Configure Vlan Port Isolation Configuration.

gs2352pMLDSnoopingRouterPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.4.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pMLDSnoopingRouterPortStatus

Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier.
Static denotes the specific port is configured to be a router port…

gs2352pMVRPortGroupFilteringIndex

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.17.4.3.1.1

gs2352pMLDSnoopingGroupsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.5 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingGroupsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingGroupsTable'

MLD Snooping Groups Information .

gs2352pMLDSnoopingGroupsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.5.1

Indexes

Column	Syntax	OID
gs2352pMLDSnoopingGroupsIndex MLD Snooping Groups Index	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.5.1.1`
gs2352pMLDSnoopingGroupsVLANID VLAN ID of the group.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.5.1.2`
gs2352pMLDSnoopingGroups Group address of the group displayed.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.5.1.3`
gs2352pMLDSnoopingGroupsMemberships Ports under this group.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.5.1.4`

gs2352pMLDSnoopingSSMTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.17.6 · 1 row entry · 7 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMLDSnoopingSSMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMLDSnoopingSSMTable'

The MLD SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry.

gs2352pMLDSnoopingSSMEntry row .1.3.6.1.4.1.2356.800.3.2353.2.17.6.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMLDSnoopingSSMIndex MLD Snooping SSM Index	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.1`
gs2352pMLDSnoopingSSMVLANID VLAN ID of the group.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.2`
gs2352pMLDSnoopingSSMGroup Group address of the group displayed.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.3`
gs2352pMLDSnoopingSSMPort Ports under this group.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.4`
gs2352pMLDSnoopingSSMMode Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.5`
gs2352pMLDSnoopingSSMSourceAddress IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.6`
gs2352pMLDSnoopingSSMType Indicates the Type. It can be either Allow or Deny.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.17.6.1.7`

gs2352pMVRPortConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.18.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMVRPortConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMVRPortConfigurationTable'

Configure MVR Port Configuration.

gs2352pMVRPortConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.18.1.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pMVRPortConfigurationMode

Enable MVR on the port.

Enumerationr/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2356.800.3.2353.2.18.1.3.1.1

gs2352pMVRPortConfigurationType

Specify the MVR port type on the port.

Enumerationr/w

Enumerated Values:

0	passive
1	active

.1.3.6.1.4.1.2356.800.3.2353.2.18.1.3.1.2

gs2352pMVRPortConfigurationImmediateLeave

Enable the fast leave on the port.

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.2.18.1.3.1.3

gs2352pMVRPortGroupFilteringTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMVRPortGroupFilteringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMVRPortGroupFilteringTable'

Configure MVR port group filtering.

gs2352pMVRPortGroupFilteringEntry row .1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMVRPortGroupFilteringIndex MVR Port Group Filtering Configuration Index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1.1`
gs2352pMVRPortGroupFilteringPort The logical port for the settings.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1.2`
gs2352pMVRPortGroupFilteringStartGroups The IP Multicast Group that will be allowed.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1.3`
gs2352pMVRPortGroupFilteringEndGroups The IP Multicast Group that will be allowed.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1.4`
gs2352pMVRPortGroupFilteringRowStatus 1: active 2: notInservice 4: destroy	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.18.2.2.1.5`

gs2352pMVRGroupsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.18.3 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMVRGroupsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMVRGroupsTable'

MVR Groups Information .

gs2352pMVRGroupsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.18.3.1

Indexes

gs2352pLACPStatusPort

Column	Syntax	OID
gs2352pMVRGroupsIndex MVR Groups Index	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.18.3.1.1`
gs2352pMVRGroupsVLANID VLAN ID of the group.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.18.3.1.2`
gs2352pMVRGroups Group address of the group displayed.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.18.3.1.3`
gs2352pMVRGroupsMemberships Ports under this group.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.18.3.1.4`

gs2352pLACPPortConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.19.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLACPPortConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLACPPortConfigurationTable'

gs2352pLACPPortConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.2.19.1.1.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pLACPPortConfigurationPort	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.19.1.1.1.1`
gs2352pLACPPortConfigurationMode Enable/Disable LACP Mode.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.19.1.1.1.2`
gs2352pLACPPortConfigurationKey LACP key : 1-65535. 0 : Auto	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.1.1.1.3`
gs2352pLACPPortConfigurationRole 0 : passive, Listen for LACP packets. 1 : active, Initiate LACP negotiation, and transmit LACP packets each second	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.19.1.1.1.4`

gs2352pLACPSystemStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.19.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLACPSystemStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLACPSystemStatusTable'

gs2352pLACPSystemStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.19.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pLACPSystemStatusIndex

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.1

gs2352pLACPSystemStatusAggrID

The Aggregation ID associated with this aggregation instance.

gs2352pLACPSystemStatusPartnerSystemID

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.2

The system ID (MAC address) of the aggregation partner.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.3

gs2352pLACPSystemStatusPartnerKey

The Key that the partner has assigned to this aggregation ID.

gs2352pLACPSystemStatusLastchanged

Constraints:
range: 1-4095

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.4

The time since this aggregation changed.

gs2352pLACPSystemStatusLocalPorts

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.5

Shows which ports are a part of this aggregation for this switch.

Constraints:
range: 0-200000000

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.2.1.6

gs2352pLACPStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.19.3 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLACPStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLACPStatusTable'

gs2352pLACPStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.19.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pLACPStatusPort

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.1

gs2352pLACPStatusLACP

Enabled means that LACP is enabled and the port link is up.
Disabled means that LACP is not enabled or that the port link is down.
Backup means that the port could not join the aggregation group but will join if other…

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.2

gs2352pLACPStatusKey

The key assigned to this port. Only ports with the same key can aggregate together.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.3

gs2352pLACPStatusAggrID

The Aggregation ID assigned to this aggregation group.

gs2352pLACPStatusPartnerSystemID

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.4

The partner's System ID.

gs2352pLACPStatusPartnerPort

Enumerated Values:

0	forcetrue
1	forcefalse
2	auto

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.5

The partner's port number connected to this port.

gs2352pSTPMSTI5NormalPortConfPort

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.19.3.1.6

gs2352pLACPStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.19.4 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pLACPStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pLACPStatisticsTable'

gs2352pLACPStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.19.4.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pLACPStatisticsPort	Integer32 Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.4.1.1`
gs2352pLACPReceived Shows how many LACP frames have been received at each port.	SNMPv2-SMICounter32 Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.4.1.2`
gs2352pLACPTransmitted Shows how many LACP frames have been sent from each port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.4.1.3`
gs2352pLACPDiscardedUnknown Shows how many unknown LACP frames have been discarded at each port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.4.1.4`
gs2352pLACPDiscardedIllegal Shows how many illegal LACP frames have been discarded at each port.	SNMPv2-SMICounter32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.19.4.1.5`

gs2352pSTPCISTNormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2 · 1 row entry · 10 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPCISTNormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPCISTNormalPortTable'

Show CIST Normal Port Configurations.

gs2352pSTPCISTNormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pSTPCISTNormalPortConfPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.1`
gs2352pSTPCISTNormalPortSTPEnabled default: 0, 0: disable 1: enable	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.2`
gs2352pSTPCISTNormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.3`
gs2352pSTPCISTNormalPortPriority default: 128, CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.4`
gs2352pSTPCISTNormalPortAdminEdge default: 0, 0: non-edge 1: edge	Enumerationr/w Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.5`
gs2352pSTPCISTNormalPortAutoEdge default: 1, 0: disable 1: enable	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.6`
gs2352pSTPCISTNormalPortRestrictedRole default: 0, 0: disable 1: enable	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.7`
gs2352pSTPCISTNormalPortRestrictedTCN default: 0, 0: disable 1: enable	Enumerationr/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.8`
gs2352pSTPCISTNormalPortBPDUGuard default: 0, 0: disable 1: enable	Enumerationr/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.9`
gs2352pSTPCISTNormalPortPointtoPoint default: 2, 0: Forced True 1: Forced False 2: Auto	Enumerationr/w Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.6.2.1.10`

gs2352pSTPMSTI1NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI1NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI1NormalPortTable'

Show MSTI1 Normal Port Configurations.

gs2352pSTPMSTI1NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.1.2.1

Indexes

Column	Syntax	OID
gs2352pSTPMSTI1NormalPortConfPort port, range : 1 - port number.	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.1.2.1.1`
gs2352pSTPMSTI1NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.1.2.1.2`
gs2352pSTPMSTI1NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.1.2.1.3`

gs2352pSTPMSTI2NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI2NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI2NormalPortTable'

Show MSTI2 Normal Port Configurations.

gs2352pSTPMSTI2NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.2.2.1

Indexes

gs2352pSTPMSTI6NormalPortConfPort

Column	Syntax	OID
gs2352pSTPMSTI2NormalPortConfPort port, range : 1 - port number.	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.2.2.1.1`
gs2352pSTPMSTI2NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.2.2.1.2`
gs2352pSTPMSTI2NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.2.2.1.3`

gs2352pSTPMSTI3NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI3NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI3NormalPortTable'

Show MSTI3 Normal Port Configurations.

gs2352pSTPMSTI3NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.3.2.1

Indexes

gs2352pSTPMSTI7NormalPortConfPort

Column	Syntax	OID
gs2352pSTPMSTI3NormalPortConfPort port, range : 1 - port number.	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.3.2.1.1`
gs2352pSTPMSTI3NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.3.2.1.2`
gs2352pSTPMSTI3NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w Constraints: `range: 0-240`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.3.2.1.3`

gs2352pSTPMSTI4NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI4NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI4NormalPortTable'

Show MSTI4 Normal Port Configurations.

gs2352pSTPMSTI4NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.4.2.1

Indexes

gs2352pCISTPortStateIndex

Column	Syntax	OID
gs2352pSTPMSTI4NormalPortConfPort port, range : 1 - port number.	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.4.2.1.1`
gs2352pSTPMSTI4NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.4.2.1.2`
gs2352pSTPMSTI4NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.4.2.1.3`

gs2352pSTPMSTI5NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.5.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI5NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI5NormalPortTable'

Show MSTI5 Normal Port Configurations.

gs2352pSTPMSTI5NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.5.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pSTPMSTI5NormalPortConfPort port, range : 1 - port number.	Integer32 Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.5.2.1.1`
gs2352pSTPMSTI5NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.5.2.1.2`
gs2352pSTPMSTI5NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.5.2.1.3`

gs2352pSTPMSTI6NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.6.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI6NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI6NormalPortTable'

Show MSTI6 Normal Port Configurations.

gs2352pSTPMSTI6NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.6.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pSTPMSTI6NormalPortConfPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.6.2.1.1`
gs2352pSTPMSTI6NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.6.2.1.2`
gs2352pSTPMSTI6NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.6.2.1.3`

gs2352pSTPMSTI7NormalPortTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.7.7.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPMSTI7NormalPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPMSTI7NormalPortTable'

Show MSTI7 Normal Port Configurations.

gs2352pSTPMSTI7NormalPortEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.7.7.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pSTPMSTI7NormalPortConfPort port, range : 1 - port number.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.7.2.1.1`
gs2352pSTPMSTI7NormalPortPathCost Auto: 0, Specific Path Cost range: 1 - 200000000.	Integer32r/w Constraints: `range: 0-200000000`	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.7.2.1.2`
gs2352pSTPMSTI7NormalPortPriority default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.2.20.7.7.2.1.3`

gs2352pCISTPortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pCISTPortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pCISTPortStateTable'

Show CIST Ports and Aggregations State Configurations.

gs2352pCISTPortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pCISTPortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.1`
gs2352pCISTPortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.2`
gs2352pCISTPortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.3`
gs2352pCISTPortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.4`
gs2352pCISTPortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.5`
gs2352pCISTPortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.6`
gs2352pCISTPortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.7`
gs2352pCISTPortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.8`
gs2352pCISTPortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.1.2.1.9`

gs2352pMSTI1PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI1PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI1PortStateTable'

Show MSTI1 Ports and Aggregations State Configurations.

gs2352pMSTI1PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI1PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.1`
gs2352pMSTI1PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.2`
gs2352pMSTI1PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.3`
gs2352pMSTI1PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.4`
gs2352pMSTI1PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.5`
gs2352pMSTI1PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.6`
gs2352pMSTI1PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.7`
gs2352pMSTI1PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.8`
gs2352pMSTI1PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.2.2.1.9`

gs2352pMSTI2PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI2PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI2PortStateTable'

Show MSTI2 Ports and Aggregations State Configurations.

gs2352pMSTI2PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI2PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.1`
gs2352pMSTI2PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.2`
gs2352pMSTI2PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.3`
gs2352pMSTI2PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.4`
gs2352pMSTI2PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.5`
gs2352pMSTI2PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.6`
gs2352pMSTI2PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.7`
gs2352pMSTI2PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.8`
gs2352pMSTI2PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.3.2.1.9`

gs2352pMSTI3PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI3PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI3PortStateTable'

Show MSTI3 Ports and Aggregations State Configurations.

gs2352pMSTI3PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI3PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.1`
gs2352pMSTI3PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.2`
gs2352pMSTI3PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.3`
gs2352pMSTI3PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.4`
gs2352pMSTI3PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.5`
gs2352pMSTI3PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.6`
gs2352pMSTI3PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.7`
gs2352pMSTI3PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.8`
gs2352pMSTI3PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.4.2.1.9`

gs2352pMSTI4PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI4PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI4PortStateTable'

Show MSTI4 Ports and Aggregations State Configurations.

gs2352pMSTI4PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI4PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.1`
gs2352pMSTI4PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.2`
gs2352pMSTI4PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.3`
gs2352pMSTI4PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.4`
gs2352pMSTI4PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.5`
gs2352pMSTI4PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.6`
gs2352pMSTI4PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.7`
gs2352pMSTI4PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.8`
gs2352pMSTI4PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.5.2.1.9`

gs2352pMSTI5PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI5PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI5PortStateTable'

Show MSTI5 Ports and Aggregations State Configurations.

gs2352pMSTI5PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI5PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.1`
gs2352pMSTI5PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.2`
gs2352pMSTI5PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.3`
gs2352pMSTI5PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.4`
gs2352pMSTI5PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.5`
gs2352pMSTI5PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.6`
gs2352pMSTI5PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.7`
gs2352pMSTI5PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Constraints: `range: 0-200000000` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.8`
gs2352pMSTI5PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.6.2.1.9`

gs2352pMSTI6PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI6PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI6PortStateTable'

Show MSTI6 Ports and Aggregations State Configurations.

gs2352pMSTI6PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI6PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.1`
gs2352pMSTI6PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.2`
gs2352pMSTI6PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.3`
gs2352pMSTI6PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.4`
gs2352pMSTI6PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.5`
gs2352pMSTI6PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.6`
gs2352pMSTI6PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.7`
gs2352pMSTI6PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.8`
gs2352pMSTI6PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Constraints: `range: 1-4095` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.7.2.1.9`

gs2352pMSTI7PortStateTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2 · 1 row entry · 9 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pMSTI7PortStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pMSTI7PortStateTable'

Show MSTI7 Ports and Aggregations State Configurations.

gs2352pMSTI7PortStateEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pMSTI7PortStateIndex table index.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.1`
gs2352pMSTI7PortStatePort The switch port number of the logical STP port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.2`
gs2352pMSTI7PortStatePortID The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.3`
gs2352pMSTI7PortStateRole The current STP port role.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.4`
gs2352pMSTI7PortStateState The current STP port state.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.5`
gs2352pMSTI7PortStatePathCost The current STP port path cost.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.6`
gs2352pMSTI7PortStateEdge The current STP port Edge Flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.7`
gs2352pMSTI7PortStatePoint2Point The current STP port point-to-point flag.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.8`
gs2352pMSTI7PortStateUptime The time since the bridge port was last initialized.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.20.8.8.2.1.9`

gs2352pSTPPortStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.9 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPPortStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPPortStatusTable'

Show STP Port Status.

gs2352pSTPPortStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.9.1

Indexes

gs2352pFilteringDataBaseConfigPort

Column Syntax OID

gs2352pSTPPortStatusPort

port, range : 1 - port number.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.20.9.1.1

gs2352pSTPPortStatusCISTRole

The current STP port role of the CIST port.

gs2352pSTPPortStatusCISTState

Enumerated Values:

0	auto
1	disable
2	secure

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.20.9.1.2

The current STP port state of the CIST port.

gs2352pSTPPortStatusUptime

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.20.9.1.3

The time since the bridge port was last initialized.

gs2352pSTPStatisticsIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.20.9.1.4

gs2352pSTPPortStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.20.10 · 1 row entry · 12 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pSTPPortStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pSTPPortStatisticsTable'

Show STP Port Statistics.

gs2352pSTPPortStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.2.20.10.1

Indexes

No indexes recorded

Column Syntax OID

table index.

Integer32

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.1

gs2352pSTPStatisticsPort

port, range : 1 - port number.

gs2352pSTPStatisticsTxMSTP

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.2

The number of MSTP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsTxRSTP

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.3

The number of RSTP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsTxSTP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.4

The number of legacy STP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsTxTCN

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.5

The number of Topology Change Notification BPDU's received/transmitted on the port.

gs2352pSTPStatisticsRxMSTP

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.6

The number of MSTP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsRxRSTP

Enumerated Values:

0	dynamic
1	static

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.7

The number of RSTP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsRxSTP

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.8

The number of legacy STP Configuration BPDU's received/transmitted on the port.

gs2352pSTPStatisticsRxTCN

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.9

The number of Topology Change Notification BPDU's received/transmitted on the port.

gs2352pSTPStatisticsDiscardedUnknown

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.10

The number of unknown Spanning Tree BPDU's received and discarded on the port.

gs2352pSTPStatisticsDiscardedIllegal

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.11

The number of illegal Spanning Tree BPDU's received and discarded on the port.

gs2352pFilteringDataBaseStaticMACIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.2.20.10.1.12

gs2352pFilteringDataBaseConfigTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pFilteringDataBaseConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pFilteringDataBaseConfigTable'

gs2352pFilteringDataBaseConfigEntry row .1.3.6.1.4.1.2356.800.3.2353.2.21.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pFilteringDataBaseConfigPort	Integer32 Constraints: `range: 0-2` `range: 99-99`	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.2.1.1`
gs2352pFilteringDataBaseConfigLearning Configure learning mode of switch ports. default: 0, 0: auto, 1: disable, 2: secure.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.2.1.2`

gs2352pFilteringDataBaseStaticMACTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pFilteringDataBaseStaticMACTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pFilteringDataBaseStaticMACTable'

gs2352pFilteringDataBaseStaticMACEntry row .1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1

Indexes

No indexes recorded

Column Syntax OID

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1.1

gs2352pFilteringDataBaseStaticMACVLANId

VLAN ID, range: 1 - 4094.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1.2

gs2352pFilteringDataBaseStaticMACAddress

MAC address, format 0a 1b 2c 3d 4e 5f

gs2352pFilteringDataBaseStaticMACPortMembers

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1.3

To include the ports in a Static MAC Table

gs2352pFilteringDataBaseStaticMACRowStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1.4

1: active
2: notInservice
4: destroy
5: undo

Enumerationr/w

Enumerated Values:

1	active
2	notInservice
3	edit
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.3.2.1.5

gs2352pFilteringDataBaseDynamicMACTable

table

.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pFilteringDataBaseDynamicMACTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pFilteringDataBaseDynamicMACTable'

gs2352pFilteringDataBaseDynamicMACEntry row .1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1

Indexes

gs2352pIPSourceGuardDynamicIndex

Column	Syntax	OID
gs2352pFilteringDataBaseDynamicMACIndex	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1.1`
gs2352pFilteringDataBaseDynamicMACType Indicates whether the entry is a static or a dynamic entry.	Enumeration Constraints: `range: 1-10`	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1.2`
gs2352pFilteringDataBaseDynamicMACVLAN The VLAN ID of the entry.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1.3`
gs2352pFilteringDataBaseDynamicMACAddress The MAC address of the entry.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1.4`
gs2352pFilteringDataBaseDynamicPortMembers The ports that are members of the entry.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.2.21.1.4.1.5`

gs2352pIPSourceGuardPortConfigTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.1.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIPSourceGuardPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIPSourceGuardPortConfigTable'

gs2352pIPSourceGuardPortConfigEntry row .1.3.6.1.4.1.2356.800.3.2353.3.1.1.2.1

Indexes

gs2352pARPInspectionConfPortIndex

Column Syntax OID

gs2352pIPSourceGuardPortConfigPort

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.1.1.2.1.1

gs2352pIPSourceGuardPortConfigMode

default: 0
0:disable
1:enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.3.1.1.2.1.2

gs2352pIPSourceGuardPortMaxDynamicClients

default: 99
0~2: Max Dynamic clients
99:Unlimited

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.3.1.1.2.1.3

gs2352pIPSourceGuardStaticTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIPSourceGuardStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIPSourceGuardStaticTable'

gs2352pIPSourceGuardStaticEntry row .1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pIPSourceGuardStaticIndex

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.1

gs2352pIPSourceGuardStaticPort

Port, range: 1 - port number.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.2

gs2352pIPSourceGuardStaticVLANId

VLAN ID, range: 1 - 4094.

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.3

gs2352pIPSourceGuardStaticIPAddress

IP address allowed for doing IP source guard.

gs2352pIPSourceGuardStaticMACAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.4

Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f

gs2352pIPSourceGuardStaticRowStatus

Enumerated Values:

1	active
2	notInservice
3	edit
4	destroy
5	undo

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.5

1: active
2: notInservice
3: edit
4: destroy
5: undo

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.1.2.2.1.6

gs2352pIPSourceGuardDynamicTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.1.3 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pIPSourceGuardDynamicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pIPSourceGuardDynamicTable'

gs2352pIPSourceGuardDynamicEntry row .1.3.6.1.4.1.2356.800.3.2353.3.1.3.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pIPSourceGuardDynamicIndex	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.3.1.3.1.1`
gs2352pIPSourceGuardDynamicPort	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.2356.800.3.2353.3.1.3.1.2`
gs2352pIPSourceGuardDynamicVLANId	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.1.3.1.3`
gs2352pIPSourceGuardDynamicIPAddress	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.2356.800.3.2353.3.1.3.1.4`
gs2352pIPSourceGuardDynamicMACAddress	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2356.800.3.2353.3.1.3.1.5`

gs2352pARPInspectionConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.2.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pARPInspectionConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pARPInspectionConfTable'

gs2352pARPInspectionConfEntry row .1.3.6.1.4.1.2356.800.3.2353.3.2.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pARPInspectionConfPortIndex	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.2.1.2.1.1`
gs2352pARPInspectionConfPortMode default: 0 0: disable 1: enable	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.2.1.2.1.2`

gs2352pARPInspectionStaticTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pARPInspectionStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pARPInspectionStaticTable'

gs2352pARPInspectionStaticEntry row .1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pARPInspectionStaticIndex

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.1

gs2352pARPInspectionStaticPort

Port, range: 1 - port number.

Integer32r/w

Enumerated Values:

0	none
1	reopen

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.2

gs2352pARPInspectionStaticVLANId

VLAN ID, range: 1 - 4094.

Integer32r/w

Enumerated Values:

1	active
2	notInservice
3	edit
4	destroy
5	undo

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.3

gs2352pARPInspectionStaticIPAddress

IP address allowed for doing ARP request.

gs2352pARPInspectionStaticMACAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.4

Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f

gs2352pARPInspectionStaticRowStatus

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.5

1: active
2: notInservice
3: edit
4: destroy
5: undo

Enumerationr/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.2.2.2.1.6

gs2352pARPInspectionDynamicTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.2.3 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pARPInspectionDynamicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pARPInspectionDynamicTable'

gs2352pARPInspectionDynamicEntry row .1.3.6.1.4.1.2356.800.3.2353.3.2.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pARPInspectionDynamicIndex

Integer32

Enumerated Values:

0	none
1	trap
2	dropAndTrap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.2356.800.3.2353.3.2.3.1.1

gs2352pARPInspectionDynamicPort

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.2.3.1.2

gs2352pARPInspectionDynamicVLANId

Integer32

Enumerated Values:

0	none
1	reopen

.1.3.6.1.4.1.2356.800.3.2353.3.2.3.1.3

gs2352pARPInspectionDynamicIPAddress

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.3.2.3.1.4

gs2352pARPInspectionDynamicMACAddress

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2356.800.3.2353.3.2.3.1.5

gs2352pARPStaticGatewayCtrlTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3 · 1 row entry · 8 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pARPStaticGatewayCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pARPStaticGatewayCtrlTable'

gs2352pARPStaticGatewayCtrlEntry row .1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pARPStaticGatewayCtrlIndex

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.1

gs2352pARPStaticGatewayCtrlIPAddress

Source IP address.

gs2352pARPStaticGatewayCtrlMACAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.2

Source MAC address , format 0a 1b 2c 3d 4e 5f

gs2352pARPStaticGatewayCtrlPort

Constraints:
range: 1-4095

Description:

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.3

Port, range: 1 - port number.

Integer32r/w

Enumerated Values:

0	none
1	clear

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.4

gs2352pARPStaticGatewayCtrlAction

default: 0
0: none
1: trap
2: drop&trap
3: shutdown
4: trap&shutdown

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.5

gs2352pARPStaticGatewayCtrlState

gs2352pARPStaticGatewayCtrlReOpen

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.6

default: 0
0: none
1: reopen

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.7

gs2352pARPStaticGatewayCtrlRowStatus

1: active
2: notInservice
3: edit
4: destroy
5: undo

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.2.6.3.1.8

gs2352pARPSpoofingPreventionTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pARPSpoofingPreventionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pARPSpoofingPreventionTable'

gs2352pARPSpoofingPreventionEntry row .1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pARPSpoofingPreventionPort	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.1`
gs2352pARPSpoofingPreventionPortMode default: 0 0: disable 1: enable	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.2`
gs2352pARPSpoofingPreventionPortLimit default: 1, range: 1-100	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.3`
gs2352pARPSpoofingPreventionPortAction default: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.4`
gs2352pARPSpoofingPreventionPortState	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.5`
gs2352pARPSpoofingPreventionPortReOpen default: 0 0: none 1: reopen	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.2.7.2.1.6`

gs2352pDHCPSnoopingPortModeConfigurationTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.3.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pDHCPSnoopingPortModeConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pDHCPSnoopingPortModeConfigurationTable'

gs2352pDHCPSnoopingPortModeConfigurationEntry row .1.3.6.1.4.1.2356.800.3.2353.3.3.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pDHCPSnoopingPortModeConfigurationPort	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.3.1.2.1.1`
gs2352pDHCPSnoopingPortModeConfigurationMode default: 1 0: trust port mode 1: untrust port mode	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.3.1.2.1.2`

gs2352pDHCPSnoopingStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.3.2 · 1 row entry · 26 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pDHCPSnoopingStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pDHCPSnoopingStatisticsTable'

gs2352pDHCPSnoopingStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.3.3.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pDHCPSnoopingStatisticsPort

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.1

gs2352pDHCPSnoopingStatisticsClear

default: 0
0: none
1: clear

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.2

gs2352pDHCPSnoopingRxDiscover

gs2352pDHCPSnoopingRxOffer

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.3

gs2352pDHCPSnoopingRxRequest

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.4

gs2352pDHCPSnoopingRxDecline

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.5

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.6

gs2352pDHCPSnoopingRxACK

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.7

gs2352pDHCPSnoopingRxNAK

gs2352pDHCPSnoopingRxRelease

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.8

gs2352pDHCPSnoopingRxInform

Constraints:
range: 1-6

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.9

gs2352pDHCPSnoopingRxLeaseQuery

Constraints:
range: 1-4094

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.10

gs2352pDHCPSnoopingRxLeaseUnassigned

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.11

gs2352pDHCPSnoopingRxLeaseUnknown

Enumerated Values:

1	active
2	notInservice
4	destroy
5	undo

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.12

gs2352pDHCPSnoopingRxLeaseActive

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.13

gs2352pDHCPSnoopingTxDiscover

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.14

gs2352pDHCPSnoopingTxOffer

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.15

gs2352pDHCPSnoopingTxRequest

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.16

gs2352pDHCPSnoopingTxDecline

Constraints:
range: 1-1024

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.17

Enumerated Values:

0	none
1	trap
2	shutdown
3	trapShutdown

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.18

gs2352pDHCPSnoopingTxACK

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.19

gs2352pDHCPSnoopingTxNAK

gs2352pDHCPSnoopingTxRelease

Enumerated Values:

0	none
1	reopen

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.20

gs2352pDHCPSnoopingTxInform

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.21

gs2352pDHCPSnoopingTxLeaseQuery

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.22

gs2352pDHCPSnoopingTxLeaseUnassigned

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.23

gs2352pDHCPSnoopingTxLeaseUnknown

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.24

gs2352pDHCPSnoopingTxLeaseActive

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.25

gs2352pPortSecLimitCtrlPort

Constraints:
range: 1-4095

.1.3.6.1.4.1.2356.800.3.2353.3.3.2.1.26

gs2352pDHCPRelayConfigurationGatewaysTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2 · 1 row entry · 4 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pDHCPRelayConfigurationGatewaysTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pDHCPRelayConfigurationGatewaysTable'

Create DHCP Relay Gateway IP address entry.

gs2352pDHCPRelayConfigurationGatewaysEntry row .1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pDHCPRelayConfigurationGatewaysIndex	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2.1.1`
gs2352pDHCPRelayConfigurationGatewaysVLANId VLAN ID	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2.1.2`
gs2352pDHCPRelayConfigurationGatewaysIP DHCP GIADDR address.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2.1.3`
gs2352pDHCPRelayConfigurationGatewaysRowStatus 1: active 2: notInservice 4: destroy 5: undo	Enumerationr/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.2356.800.3.2353.3.4.1.5.2.1.4`

gs2352pPortSecLimitCtrlTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortSecLimitCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortSecLimitCtrlTable'

gs2352pPortSecLimitCtrlEntry row .1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1

Indexes

No indexes recorded

Column Syntax OID

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.1

gs2352pPortSecLimitCtrlPortMode

default: 0
0: disable
1: enable

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.2

gs2352pPortSecLimitCtrlPortLimit

default: 4, range: 1-1024

Integer32r/w

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.3

gs2352pPortSecLimitCtrlPortAction

default: 0
0: none
1: trap
2: shutdown
3: trap&shutdown

Enumerationr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.4

gs2352pPortSecLimitCtrlPortState

gs2352pPortSecLimitCtrlPortReOpen

Enumerated Values:

0	ipv4
1	ipv6

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.5

default: 0
0: none
1: reopen

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.5.1.2.1.6

gs2352pPortSecSwitchStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortSecSwitchStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortSecSwitchStatusTable'

gs2352pPortSecSwitchStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.3.5.2.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pPortSecSwitchStatusPort

Integer32

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.3.5.2.1.1

gs2352pPortSecSwitchStatusUsers

Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled.

gs2352pPortSecSwitchStatusState

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.5.2.1.2

Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.

gs2352pPortSecSwitchStatusMACCountCurrent

Enumerated Values:

1	active
2	notInservice
3	edit
4	destroy
5	undo

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.5.2.1.3

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.5.2.1.4

gs2352pPortSecSwitchStatusMACCountLimit

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.5.2.1.5

gs2352pPortSecPortStatusTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2 · 1 row entry · 6 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pPortSecPortStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pPortSecPortStatusTable'

gs2352pPortSecPortStatusEntry row .1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pPortSecPortStatusIndex	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.1`
gs2352pPortSecPortStatusMACAddress	SNMPv2-TCMacAddress Constraints: `range: 0-65535` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.2`
gs2352pPortSecPortStatusVLANId	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.3`
gs2352pPortSecPortStatusState Blocked / Forwarding	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.4`
gs2352pPortSecPortStatusTimeOfAddition	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.5`
gs2352pPortSecPortStatusAgeAndHold	SNMPv2-TCDisplayString Constraints: `range: 1-5` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.5.3.2.1.6`

gs2352pAccessMgtConfTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3 · 1 row entry · 8 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pAccessMgtConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pAccessMgtConfTable'

gs2352pAccessMgtConfEntry row .1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pAccessMgtIndex

Set Access Management config index
range : 1-16.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.1

gs2352pAccessMgtAddresstype

0: ipv4
1: ipv6

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.2

gs2352pAccessMgtStartIpAddress

Start IP address.
IP address doesn't allowed all zero or all 'ff'H.

gs2352pAccessMgtEndIpAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.3

End IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address.

gs2352pAccessMgtHttpHttps

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.4

default: 0
0: disable
1: enable

Enumerationr/w

Constraints:
range: 1-5

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.5

gs2352pAccessMgtSNMP

default: 0
0: disable
1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.6

gs2352pAccessMgtTelnetSSH

default: 0
0: disable
1: enable

Enumerationr/w

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.7

gs2352pAccessMgtRowStatus

1: active
2: notInservice
3: edit
4: destroy
5: undo

Enumerationr/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2356.800.3.2353.3.6.1.3.1.8

gs2352pRADIUSAuthenticationServerTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.10.3 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pRADIUSAuthenticationServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pRADIUSAuthenticationServerTable'

gs2352pRADIUSAuthenticationServerEntry row .1.3.6.1.4.1.2356.800.3.2353.3.10.3.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pRADIUSAuthenticationServerIndex RADIUS Authentication Server index range : 1-5.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.10.3.1.1`
gs2352pRADIUSAuthenticationServerEnable Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable can be set, when IP and Secret have value	Enumerationr/w Constraints: `range: 1-5`	`.1.3.6.1.4.1.2356.800.3.2353.3.10.3.1.2`
gs2352pRADIUSAuthenticationServerIP The IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.3.1.3`
gs2352pRADIUSAuthenticationServerPort The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.3.10.3.1.4`
gs2352pRADIUSAuthenticationServerSecret The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.3.1.5`

gs2352pRADIUSAccountingServerTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.10.4 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pRADIUSAccountingServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pRADIUSAccountingServerTable'

gs2352pRADIUSAccountingServerEntry row .1.3.6.1.4.1.2356.800.3.2353.3.10.4.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pRADIUSAccountingServerIndex RADIUS Accounting Server index range : 1-5.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.10.4.1.1`
gs2352pRADIUSAccountingServerEnable Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable can be set, when IP and Secret have value.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.10.4.1.2`
gs2352pRADIUSAccountingServerIP The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.4.1.3`
gs2352pRADIUSAccountingServerPort The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.3.10.4.1.4`
gs2352pRADIUSAccountingServerSecret The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.4.1.5`

gs2352pTACACSPlusAuthenticationServerTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.10.5 · 1 row entry · 5 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pTACACSPlusAuthenticationServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pTACACSPlusAuthenticationServerTable'

gs2352pTACACSPlusAuthenticationServerEntry row .1.3.6.1.4.1.2356.800.3.2353.3.10.5.1

Indexes

No indexes recorded

Column	Syntax	OID
gs2352pTACACSPlusAuthenticationServerIndex TACACSPlus Authentication Server index range : 1-5.	Integer32	`.1.3.6.1.4.1.2356.800.3.2353.3.10.5.1.1`
gs2352pTACACSPlusAuthenticationServerEnable Enable/Disable the TACACSPlus Authentication Server. The TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have value.	Enumerationr/w	`.1.3.6.1.4.1.2356.800.3.2353.3.10.5.1.2`
gs2352pTACACSPlusAuthenticationServerIP The IP address or hostname of the TACACSPlus Authentication Server. IP address is expressed in dotted decimal notation.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.5.1.3`
gs2352pTACACSPlusAuthenticationServerPort The UDP port to use on the TACACSPlus Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the TACACSPlus Authentication Server.	Integer32r/w	`.1.3.6.1.4.1.2356.800.3.2353.3.10.5.1.4`
gs2352pTACACSPlusAuthenticationServerSecret The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.2356.800.3.2353.3.10.5.1.5`

gs2352pRADIUSStatisticsTable

table

.1.3.6.1.4.1.2356.800.3.2353.3.10.6 · 1 row entry · 28 columns

Open in standard view

Uses the lancom variant from /opt/observium/mibs/lancom.

Command help

Walk gs2352pRADIUSStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2352P-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2352P-MIB::gs2352pRADIUSStatisticsTable'

gs2352pRADIUSStatisticsEntry row .1.3.6.1.4.1.2356.800.3.2353.3.10.6.1

Indexes

No indexes recorded

Column Syntax OID

gs2352pRADIUSAuthStatisticsServerIndex

RADIUS Authentication Server index
range : 1-5.

Integer32

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.1

gs2352pRADIUSAuthStatisticsRecPktAccessAccepts

The number of RADIUS Access-Accept packets (valid or invalid) received from the server.

gs2352pRADIUSAuthStatisticsRecPktAccessRejects

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.2

The number of RADIUS Access-Reject packets (valid or invalid) received from the server.

gs2352pRADIUSAuthStatisticsRecPktAccessChallenges

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.3

The number of RADIUS Access-Challenge packets (valid or invalid) received from the server.

gs2352pRADIUSAuthStatisticsRecPktMalformedAccResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.4

The number of malformed RADIUS Access-Response packets received from the
server. Malformed packets include packets with an invalid length. Bad
authenticators or Message Authenticator attributes or unknown types are
not …

gs2352pRADIUSAuthStatisticsRecPktBadAuthenticators

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.5

The number of RADIUS Access-Response packets containing invalid
authenticators or Message Authenticator attributes received from the server.

gs2352pRADIUSAuthStatisticsRecPktUnknownTypes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.6

The number of RADIUS packets that were received with unknown types from
the server on the authentication port and dropped.

gs2352pRADIUSAuthStatisticsRecPktDropped

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.7

The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason.

gs2352pRADIUSAuthStatisticsTransmitPktAccessRequests

Constraints:
range: 0-1

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.8

The number of RADIUS Access-Request packets sent to the server. This
does not include retransmissions.

gs2352pRADIUSAuthStatisticsTransmitPktAccessRetransmissions

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.9

The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server.

gs2352pRADIUSAuthStatisticsTransmitPktPendingRequests

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.10

The number of RADIUS Access-Request packets destined for the server that
have not yet timed out or received a response. This variable is
incremented when an Access-Request is sent and decremented due to
receipt of an Ac…

gs2352pRADIUSAuthStatisticsTransmitPktTimeouts

Constraints:
range: 1-255

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.11

The number of authentication timeouts to the server. After a timeout,
the client may retry to the same server, send to a different server, or
give up. A retry to the same server is counted as a retransmit as well as
a …

Enumerated Values:

1	forceAuthorized
2	forceUnauthorized
3	portBased
4	single
5	multi
6	macBased
7	macBasedSingle

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.12

gs2352pRADIUSAuthIP

IP address and UDP port for the authentication server in question.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.13

gs2352pRADIUSAuthState

Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enab…

gs2352pRADIUSAuthRoundTripTime

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.14

The time interval (measured in milliseconds) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from
the RADIUS authentication server. The granularity of this measurement is
…

gs2352pRADIUSAccountingStatisticsRecPktResponses

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.15

The number of RADIUS packets (valid or invalid) received from the server.

gs2352pRADIUSAccountingStatisticsRecPktMalformedResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.16

The number of malformed RADIUS packets received from the server.
Malformed packets include packets with an invalid length. Bad
authenticators or unknown types are not included as malformed access
responses.

gs2352pRADIUSAccountingStatisticsRecPktBadAuthenticators

Enumerated Values:

0	doNothing
1	do

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.17

The number of RADIUS packets containing invalid authenticators received
from the server.

gs2352pRADIUSAccountingStatisticsRecPktUnknownTypes

Enumerated Values:

0	doNothing
1	do

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.18

The number of RADIUS packets of unknown types that were received from
the server on the accounting port.

gs2352pRADIUSAccountingStatisticsRecPktDropped

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.19

The number of RADIUS packets that were received from the server on the
accounting port and dropped for some other reason.

gs2352pRADIUSAccountingStatisticsTransmitPktRequests

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.20

The number of RADIUS packets sent to the server. This does not include
retransmissions.

gs2352pRADIUSAccountingStatisticsTransmitPktRetransmissions

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.21

The number of RADIUS packets retransmitted to the RADIUS accounting server.

gs2352pRADIUSAccountingStatisticsTransmitPktPendingRequests

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.22

The number of RADIUS packets destined for the server that have not yet
timed out or received a response. This variable is incremented when a
Request is sent and decremented due to receipt of a Response, timeout,
or retr…

gs2352pRADIUSAccountingStatisticsTransmitPktTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.23

The number of accounting timeouts to the server. After a timeout, the
client may retry to the same server, send to a different server, or give
up. A retry to the same server is counted as a retransmit as well as a
timeo…

gs2352pRADIUSAccountingIP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.24

IP address and UDP port for the accounting server in question.

gs2352pRADIUSAccountingState

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.25

gs2352pRADIUSAccountingRoundTripTime

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2356.800.3.2353.3.10.6.1.26

The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS accounting
server. The granularity of this measurement is 100 ms. A value of 0 ms
indicates t…