LANCOM-GS-2326PPLUS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
118
Rows
118
Columns
878
.1.3.6.1.4.1.2356.800.3.2328.1.2.2.1
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSystemTimeNTPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSystemTimeNTPTable'
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The index of the ntp entry.
|
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.1.2.2.1.1.1 |
||||||||
|
Default: 0,
0 : IPv4, 1 : IPv6. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.2.2.1.1.2 |
||||||||
|
Get/Set the NTP Time Server1. You can use the IP address or domain name.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.2.2.1.1.3 |
||||||||
|
0: Empty
1: Active 2: Edit 3: Delete |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.2.2.1.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSystemAccountUsersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSystemAccountUsersTable'
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-20 |
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2.1.1 |
|||||||||||
|
Please use a combination of letters, numbers and underscores
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2.1.2 |
||||||||||
|
Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2.1.3 |
||||||||||
|
default:1
User privilege level range : 1 - 15 |
Integer32r/w Constraints: range: 1-15 |
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2.1.4 |
||||||||||
|
1: active
2: notInservice 3: edit 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.3.1.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.1.5.2.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSyslogDetailedInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSyslogDetailedInfoTable'
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-1024 |
.1.3.6.1.4.1.2356.800.3.2328.1.5.2.2.1.1 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.5.2.2.1.2 |
|
| OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.2356.800.3.2328.1.5.2.2.1.3 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.5.2.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.5
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusGetCommunityConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusGetCommunityConfTable'
Show get-community of the SNMP.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
index, range : 1 - 5.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.5.1.1 |
|
Get/Set the get-community of the SNMP.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.5.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6
·
1 row entry
·
13 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusTrapHostConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusTrapHostConfTable'
A list of trap host entry. The numbers of entries are given by the value of gs2326pplusTrapHostConfNumber.
This is the entry information for trap host.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The index of the trap host entry.
|
Integer32 Constraints: range: 1-6 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.1 |
||||||||||||||||
|
The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.2 |
||||||||||||||||
|
Server IP Type. Default: 4,
4 : IPv4, 6 : IPv6. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.3 |
||||||||||||||||
|
This is the IP of the trap host.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.4 |
||||||||||||||||
|
This is the receiving-port number of the trap host.
range : 1 - 65535. |
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.5 |
||||||||||||||||
|
The community/security name for the trap PDU.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.6 |
||||||||||||||||
|
The Severity Level.
0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.7 |
||||||||||||||||
|
The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.8 |
||||||||||||||||
|
Authentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.9 |
||||||||||||||||
|
Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SH… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.10 |
||||||||||||||||
|
This is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.11 |
||||||||||||||||
|
The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.12 |
||||||||||||||||
|
0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.1.6.1.13 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSnmpCommunitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSnmpCommunitiesTable'
Create SNMPv1/v2 Communities entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.1 |
|||||||||
|
Up to 32 characters describing Community.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.2 |
||||||||
|
Up to 32 characters describing User Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.3 |
||||||||
|
SNMP access source ip.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.4 |
||||||||
|
SNMP access source address mask.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.5 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.3.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2
·
1 row entry
·
8 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSnmpUsersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSnmpUsersTable'
Create SNMPv3 users entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-10 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.1 |
|||||||||
|
Up to 32 characters describing User Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.2 |
||||||||
|
1: No authentication and no privacy.
2: Authentication and no privacy. 3: Authentication and privacy. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.3 |
||||||||
|
0: None.
1: MD5. 2: SHA |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.4 |
||||||||
|
Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SH… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.5 |
||||||||
|
0: None.
1: DES. 2: AES This is the Privacy Protocol, which is used in AuthPriv. An empty string will be returned if the security level is not 3(AuthPriv) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.6 |
||||||||
|
The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.7 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.4.2.1.8 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSnmpGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSnmpGroupsTable'
Create SNMPv3 groups entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-14 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2.1.1 |
|||||||||
|
1: v1.
2: v2c. 3: usm. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2.1.2 |
||||||||
|
Up to 32 characters describing User Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2.1.3 |
||||||||
|
Up to 32 characters describing Group Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2.1.4 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.5.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSnmpViewsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSnmpViewsTable'
Create SNMPv1/v2 Views entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2.1.1 |
|||||||||
|
Up to 32 characters describing view Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2.1.2 |
||||||||
|
1: included, An optional flag to indicate that this view subtree should be included.
2: excluded, An optional flag to indicate that this view subtree should be excluded. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2.1.3 |
||||||||
|
The OID defining the root of the subtree to add to the named view.
|
OctetStringr/w Constraints: range: 1-128 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2.1.4 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.6.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSnmpAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSnmpAccessTable'
Create SNMPv3 Access entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-14 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.1 |
|||||||||
|
Up to 32 characters describing Group Name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.2 |
||||||||
|
0: any.
1: v1. 2: v2c. 3: usm. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.3 |
||||||||
|
1: No authentication and no privacy.
2: Authentication and no privacy. 3: Authentication and privacy. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.4 |
||||||||
|
Up to 32 characters describing Read View Name.
None is reserved for Empty. |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.5 |
||||||||
|
Up to 32 characters describing Write View Name.
None is reserved for Empty. |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.6 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.1.6.7.2.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1
·
1 row entry
·
12 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortConfigurationTable'
Show port configurations.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.1 |
||||||||||||||||||||||||
|
Show port media.
|
OctetString Constraints: range: 1-4 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.2 |
||||||||||||||||||||||||
|
The current link state.
|
OctetString Constraints: range: 2-4 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.3 |
||||||||||||||||||||||||
|
The current link speed of the port.
|
OctetString Constraints: range: 6-12 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.4 |
||||||||||||||||||||||||
|
default: 1,
0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 100… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.5 |
||||||||||||||||||||||||
|
0: disable
1: enable 2: no support. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.6 |
||||||||||||||||||||||||
|
0: disable
1: enable 2: no support. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.7 |
||||||||||||||||||||||||
|
default: 0,
0: disable 1: enable 2: no support. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.8 |
||||||||||||||||||||||||
|
default: 9600 , range : 1518 - 9600
|
Integer32r/w Constraints: range: 1518-9600 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.9 |
||||||||||||||||||||||||
|
default: 0,
Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.10 |
||||||||||||||||||||||||
|
default: 0,
PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.11 |
||||||||||||||||||||||||
|
Interface specific description.
Up to 47 characters describing this interface. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.1.1.12 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2
·
1 row entry
·
53 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortTrafficStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortTrafficStatisticsTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.1 |
|||||
| Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.2 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.3 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.4 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.5 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.6 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.7 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.8 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.9 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.10 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.11 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.12 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.13 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.14 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.15 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.16 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.17 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.18 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.19 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.20 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.21 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.22 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.23 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.24 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.25 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.26 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.27 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.28 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.29 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.30 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.31 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.32 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.33 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.34 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.35 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.36 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.37 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.38 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.39 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.40 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.41 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.42 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.43 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.44 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.45 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.46 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.47 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.48 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.49 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.50 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.51 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.52 |
|||||
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.2.1.53 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2
·
1 row entry
·
17 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortQoSStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortQoSStatisticsTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.1 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.2 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.3 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.4 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.5 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.6 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.7 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.8 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.9 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.10 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.11 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.12 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.13 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.14 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.15 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.16 |
|
| SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.3.2.1.17 |
gs2326pplusSFPInfoTable
table.1.3.6.1.4.1.2356.800.3.2328.2.1.4
·
1 row entry
·
17 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSFPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSFPInfoTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.1 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.2 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.3 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.4 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.5 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.6 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.7 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.8 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.9 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.10 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.11 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.12 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.13 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.14 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.15 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.16 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.1.4.1.17 |
gs2326pplusPortEEETable
table.1.3.6.1.4.1.2356.800.3.2328.2.1.5
·
1 row entry
·
10 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortEEETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortEEETable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.1 |
|||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.2 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.3 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.4 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.5 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.6 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.7 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.8 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.9 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.1.5.1.10 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVoiceVLANPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVoiceVLANPortTable'
Show Voice Vlan configuration.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5.1.1 |
||||||
|
Voice VLAN port mode.
default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members auto… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5.1.2 |
||||||
|
Voice VLAN port security mode.
default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all non-telephone MAC address in Voice VLAN … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5.1.3 |
||||||
|
Voice VLAN port discovery protocol.
default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5.1.4 |
||||||
|
Voice VLAN skip NAS mode.
default: 0, 0: Disable (Do not skip NAS on Voice VLAN.) 1: enable (Enable skipping of NAS on Voice VLAN. When the function is enabled, authentication through the NAS module is not … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.2.1.5.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.2.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVoiceVLANOUITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVoiceVLANOUITable'
Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.2.2.1.1 |
|||||||||
|
OUI address, format : 0a 1b 2c
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.2.2.1.2 |
||||||||
|
Up to 32 characters describing OUI address.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2356.800.3.2328.2.2.2.2.1.3 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.2.2.2.1.4 |
gs2326pplusGARPConfTable
table.1.3.6.1.4.1.2356.800.3.2328.2.3.1
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusGARPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusGARPConfTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.1 |
|||||
|
default: 200, range : 200 - 1000
|
Integer32r/w Constraints: range: 200-1000 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.2 |
||||
|
default: 600 , range : 600 - 3000
|
Integer32r/w Constraints: range: 600-3000 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.3 |
||||
|
default: 10000, range : 10000 - 50000
|
Integer32r/w Constraints: range: 10000-50000 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.4 |
||||
|
default: 1
1: GVRP |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.5 |
||||
|
default: 1
1: VLAN |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.6 |
||||
|
default: 0
0: normal-participant 1: non-participant |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.3.1.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusGARPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusGARPStatisticsTable'
Show the basic GARP port statistics.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.2.1.1 |
|
Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.3.2.1.2 |
|
explain Failed count here.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.3.2.1.3 |
gs2326pplusGVRPConfTable
table.1.3.6.1.4.1.2356.800.3.2328.2.4.1.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusGVRPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusGVRPConfTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.4.1.2.1.1 |
|||||
|
default: 0
1: enable 0: disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.4.1.2.1.2 |
||||
|
default: 0
1: enable 0: disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.4.1.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.4.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusGVRPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusGVRPStatisticsTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.4.2.1.1 |
|
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.4.2.1.2 |
|
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.4.2.1.3 |
gs2326pplusMirrorTable
table.1.3.6.1.4.1.2356.800.3.2328.2.6.2
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMirrorTable'
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.6.2.1.1 |
|||||||||
|
default: 0
0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.6.2.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1
·
1 row entry
·
10 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusACLPortsConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusACLPortsConfTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.1 |
|||||
|
default: 0, range : 0 - 255
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.2 |
||||
|
default: 1,
0: Deny 1: Permit |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.3 |
||||
|
default: 0,
0: Disable range : 0 - 12 |
Integer32r/w Constraints: range: 0-12 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.4 |
||||
|
default: 0
0: Disable range : 0 - end port number |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.5 |
||||
|
default: 0
0: Disable 1: Enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.6 |
||||
|
default: 0
0: Disable 1: Enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.7 |
||||
|
default: 0
0: Disable 1: Enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.8 |
||||
|
default: 1
0: Disable 1: Enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.9 |
||||
|
Counts the number of frames that match this ACE.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.1.1.10 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusACLRateLimiterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusACLRateLimiterTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Rate Limiter ID.
range : 1-12 |
Integer32 Constraints: range: 1-12 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.2.1.1 |
||||
|
default: 0,
0: pps 1: kbps |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.2.1.2 |
||||
|
default: 1,
range : <0-3276700> pps <0-10000> kbps |
Integer32r/w Constraints: range: 0-3276700 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.2.1.3 |
gs2326pplusACLACETable
table.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2
·
1 row entry
·
50 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusACLACETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusACLACETable'
Create ACL ACE entry.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.1 |
|||||||||||||||
|
If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. |
Integer32r/w Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.2 |
||||||||||||||
|
If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256. |
Integer32r/w Constraints: range: 0-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.3 |
||||||||||||||
|
Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: 1,3,6. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.4 |
||||||||||||||
|
policy value.
range : 0 - 255. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.5 |
||||||||||||||
|
policy bitmask.
range : 0 - 255(0xff). |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.6 |
||||||||||||||
|
0: any,
1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.7 |
||||||||||||||
|
default: 1,
0: Deny 1: Permit |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.8 |
||||||||||||||
|
Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.9 |
||||||||||||||
|
default: 0,
0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.10 |
||||||||||||||
|
default: 0,
0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.11 |
||||||||||||||
|
default: 0,
0: Disable range : 0 - 12 |
Integer32r/w Constraints: range: 0-12 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.12 |
||||||||||||||
|
default: 0,
0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.13 |
||||||||||||||
|
Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any - Any value is allowed. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.14 |
||||||||||||||
|
Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8 |
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.15 |
||||||||||||||
|
Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4094 |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.16 |
||||||||||||||
|
0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.17 |
||||||||||||||
|
Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value. Any: Don't care. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.18 |
||||||||||||||
|
DMAC Type.
default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast. 4: mac address. range : 0 - 4 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.19 |
||||||||||||||
|
Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcast: Frame must be broadcast. Unicast: Frame must… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.20 |
||||||||||||||
|
Configure ARP opcode for this ACE.
default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 4 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.21 |
||||||||||||||
|
Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.22 |
||||||||||||||
|
Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SM… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.23 |
||||||||||||||
|
Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.24 |
||||||||||||||
|
Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06)… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.25 |
||||||||||||||
|
Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is … |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.26 |
||||||||||||||
|
Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is … |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.27 |
||||||||||||||
|
Configure source IP address for this ACE.
default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.28 |
||||||||||||||
|
A frame that hits this ACE matches this source IP address value.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.29 |
||||||||||||||
|
Network prefix.
default: 32, 0: No data. range : 1 - 32 |
Integer32r/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.30 |
||||||||||||||
|
Configure destination IP address for this ACE.
default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.32 |
||||||||||||||
|
A frame that hits this ACE matches this destination IP address value.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.33 |
||||||||||||||
|
Network prefix.
default: 32, 0: No data. range : 1 - 32 |
Integer32r/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.34 |
||||||||||||||
|
Configure IP protocol for this ACE.
default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256 |
Integer32r/w Constraints: range: 0-257 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.36 |
||||||||||||||
|
Configure IP Time-to-Live flags for this ACE.
default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field greater than zero. 2: Any - Don't care. 3: No data. range : 0… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.37 |
||||||||||||||
|
Configure IP options flag for this ACE.
default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.38 |
||||||||||||||
|
Configure IP fragment offset flags for this ACE.
default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater t… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.39 |
||||||||||||||
|
Configure ICMP type for this ACE.
default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256 |
Integer32r/w Constraints: range: 0-257 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.40 |
||||||||||||||
|
Configure ICMP code for this ACE.
default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257 |
Integer32r/w Constraints: range: 0-257 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.41 |
||||||||||||||
|
Configure Source UDP/TCP port range for this ACE.
default: 0, 65536: No data. range : 0 - 65536 |
Integer32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.42 |
||||||||||||||
|
Configure Source UDP/TCP port range for this ACE.
default: 0, 65536: No data. range : 0 - 65536 |
Integer32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.43 |
||||||||||||||
|
Configure Destination UDP/TCP port range for this ACE.
default: 0, 65536: No data. range : 0 - 65535 |
Integer32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.44 |
||||||||||||||
|
Configure Destination UDP/TCP port range for this ACE.
default: 0, 65536: No data. range : 0 - 65535 |
Integer32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.45 |
||||||||||||||
|
Configure TCP (FIN) flags for this ACE.
default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.46 |
||||||||||||||
|
Configure TCP (SYN) flags for this ACE.
default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.47 |
||||||||||||||
|
Configure TCP (RST) flags for this ACE.
default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.48 |
||||||||||||||
|
Configure TCP (PSH) flags for this ACE.
default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.49 |
||||||||||||||
|
Configure TCP (ACK) flags for this ACE.
default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.50 |
||||||||||||||
|
Configure TCP (URG) flags for this ACE.
default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.51 |
||||||||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.2.1.66 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6
·
1 row entry
·
12 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusACLACEStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusACLACEStatusTable'
ACL ACE Status entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.1 |
|
|
Indicates the ACL user.
S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.2 |
|
ACE ID.
range : 1 - 256. |
Integer32 Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.3 |
|
Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.4 |
|
Indicates the frame type of the ACE.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.5 |
|
Indicates the forwarding action of the ACE.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.6 |
|
Indicates the rate limiter number of the ACE.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.7 |
|
Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.8 |
|
Specify the mirror operation of this port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.9 |
|
Forward packet that matched the specific ACE to CPU.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.10 |
|
The counter indicates the number of times the ACE was hit by a frame.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.11 |
|
Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.9.3.6.1.12 |
.1.3.6.1.4.1.2356.800.3.2328.2.12.1.4
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLoopProtectionConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLoopProtectionConfigurationTable'
Show Loop Protection configurations.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.12.1.4.1.1 |
||||||
|
Configure loop protection port mode.
0: disable, 1: enable, default: enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.12.1.4.1.2 |
||||||
|
Configure loop protection port action.
0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.12.1.4.1.3 |
||||||
|
Configure loop protection port transmit mode.
0: disable, 1: enable, default: enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.12.1.4.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLoopProtectionStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLoopProtectionStatusTable'
Show Loop Protection Status.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.1 |
|
The currently configured port action.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.2 |
|
The currently configured port transmit mode.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.3 |
|
The number of loops detected on this port.
|
Integer32 Constraints: range: 0-1000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.4 |
|
The current loop protection status of the port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.5 |
|
Whether a loop is currently detected on the port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.6 |
|
The time of the last loop event detected.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.12.2.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1
·
1 row entry
·
8 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoeStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoeStatusTable'
Configure PoE Scheduling Table.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.1 |
|
Indicates the QCL user.
0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 30.0 W. |
Integer32 Constraints: range: 0-4 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.2 |
|
The Power Requested shows the requested amount of power the PD wants to be reserved.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.3 |
|
The Power Allocated shows the amount of power the switch has allocated for the PD.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.4 |
|
The Power Used shows how much power the PD currently is using.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.5 |
|
The Power Used shows how much current the PD currently is using.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.6 |
|
The Priority shows the port's priority configured by the user.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.7 |
|
The Port Status shows the port's status.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.1.1.1.8 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.2.1
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoePowerDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoePowerDelayTable'
Configure PoE Power Delay mode.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.2.1.1.1 |
||||
|
Turn on / off the power delay function,
0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.2.1.1.2 |
||||
|
set Delay Time,
default: 0, range: 0-300 sec. |
Integer32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.2.1.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoeAutoCheckTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoeAutoCheckTable'
Configure PoE Power Delay mode.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.1 |
||||
|
IP Address the system should ping.
default: 0.0.0.0 . |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.2 |
||||
|
Device will send checking message to PD each interval time.
default: 30, range: 10-120 sec. |
Integer32r/w Constraints: range: 10-120 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.3 |
||||
|
It will retry to send detection again.
default: 3, range: 1-5. |
Integer32r/w Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.4 |
||||
|
Failure loggings counter.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.5 |
||||
|
It will retry to send detection again,
0: Nothing, 1: Reboot Remote PD, default: Nothing. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.6 |
||||
|
When PD has been rebooted, the PoE port restored power after the specified time.
default: 15, range: 3-120 sec. |
Integer32r/w Constraints: range: 3-120 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.3.2.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.1
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoeSchedulingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoeSchedulingTable'
Configure PoE Scheduling Table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.1.1.1 |
||||
|
PoE Scheduling Status.
0: Disable, 1: Enable, default: Disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.1.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoeSchedulingTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoeSchedulingTimeTable'
Show Poe Scheduling Time Config.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.2.1.1 |
||||||||||||||
|
range: 1-7,
Sunday:7, Monday:1, Tuseday:2, Wednesday:3, Thursday:4, Friday:5, Saturday:6. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.2.1.2 |
||||||||||||||
|
range: 1-24,
24: hour 0, 1: hour 1, 2: hour2... |
Integer32 Constraints: range: 1-24 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.2.1.3 |
||||||||||||||
|
0: disable,
1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.4.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPoeConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPoeConfigurationTable'
Configure PoE Configuration mode.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.1 |
||||||
|
The PoE Mode represents the PoE operating mode for the port.
0: Disable, 1: Enable, default: Enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.2 |
||||||
|
The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical.
0: Low, 1: High, 2: Critical, default: Low. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.3 |
||||||
|
The Maximum Power value contains a numerical value that indicates the maximum
power in watts that can be delivered to a remote device. default: 15.4[W], max: 30[W]. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.4 |
||||||
|
Configure PoE port capacitor detection.
0: No Detection(read only), 1: legacy, 2: 4-point, 3: 4-point-legacy, 4: 2-point, 5: 2-point-legacy, default: 4-point. |
Integer32r/w Constraints: range: 0-5 |
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.5 |
||||||
|
Reset the specific PoE port.
0: Disable, 1: Enable, default: Disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.13.5.3.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1
·
1 row entry
·
8 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortClassificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortClassificationTable'
QoS Ingress Port Classification .
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.1 |
||||
|
Controls the default QoS class, i.e., the QoS class
for frames not classified in any other way. There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. Note:… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.2 |
||||
|
DP level for frames not classified in any other way.
range: 0-1, default: 0. |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.3 |
||||
|
Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame.
range: 0-7, default: 0. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.4 |
||||
|
Drop Eligible Indicator. It is a 1-bit field in the VLAN.
range 0-1, default: 0. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.5 |
||||
|
Configure the classification mode for tagged frames.
0: Disable, 1: Enable, default: Disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.6 |
||||
|
Click to Enable DSCP Based QoS Ingress Port Classification.
0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.7 |
||||
|
The IP/MAC address mode specifying whether the QCL classification
must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses on this port. 0: source, 1: destination, default: source. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.1.1.8 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQoSIngressPortTagClassificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQoSIngressPortTagClassificationTable'
Show QoS Ingress Port Tag Classification.
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2.1.1 |
||||||||||||||||
|
range: 1-8,
PCP0:1, PCP1:2... |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2.1.2 |
||||||||||||||||
|
range: 1-2,
DEI0:1, DEI1:2. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2.1.3 |
||||||||||||||||
|
range: 0-7.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2.1.4 |
||||||||||||||||
|
range: 0-1.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.1.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortPolicingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortPolicingTable'
configure the Policer settings for all switch ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.2.1.1 |
||||
|
Controls whether the policer is enabled on this switch port.
0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.2.1.2 |
||||
|
Controls the rate for the policer.
range: 100-10000000(kbps/fps), default: 500(kbps). |
Integer32r/w Constraints: range: 100-10000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.2.1.3 |
||||
|
Controls the unit of measure for the policer rate.
0: kbps, 1: fps, default: kbps. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.2.1.4 |
||||
|
If flow control is enabled and the port is in flow control mode,
then pause frames are sent instead of discarding frames. 0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.1
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortSchedulerModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortSchedulerModeTable'
configure the basic QoS Port Scheduler Mode settings for all switch ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.1.1.1 |
||||
|
Controls whether the scheduler mode is Strict Priority or Weighted
on this switch port. 0:Strict Priority 1:Weighted default: Strict Priority. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.1.1.2 |
||||
|
Controls whether the port shaper is enabled
0: Disable 1: Enable. default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.1.1.3 |
||||
|
Controls the rate for the port shaper.
range: 100-1000000 default: 500 kbps. |
Integer32r/w Constraints: range: 100-1000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.1.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortSchedulerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortSchedulerTable'
Show Qos Port Scheduler.
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.1 |
||||||||||||||||
|
range: 1-8.
Q0: 1, Q1: 2, ... |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.2 |
||||||||||||||||
|
0: disable 1:enable,
default: 0. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.3 |
||||||||||||||||
|
range: 100..1000000 kbps.
|
Integer32r/w Constraints: range: 100-1000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.4 |
||||||||||||||||
|
0: disable 1:enable,
default: 0. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.5 |
||||||||||||||||
|
range: 1-100,
default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0 |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.6 |
||||||||||||||||
|
Only use in Q0 - Q5. Q6 & Q7 show empty
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.3.2.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.1
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortEgressTagRemarkingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortEgressTagRemarkingTable'
configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.1.1.1 |
||||||
|
the tag remarking mode for this port.
0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.1.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortEgressTagRemarkingDefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortEgressTagRemarkingDefTable'
configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.2.1.1 |
||||
|
Controls the default PCP
Range : 0-7 |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.2.1.2 |
||||
|
controls the DEI
Range 0-1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortEgressTagRemarkingMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortEgressTagRemarkingMapTable'
Show Qos Port Egress Tag Remarking Map.
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4.1.1 |
||||||||||||||||
|
range: 1-8,
QoS Class0: 1, QoS Class1: 2... |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4.1.2 |
||||||||||||||||
|
range: 1-2,
DP Level0: 1, DP Level1: 2. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4.1.3 |
||||||||||||||||
|
range: 0-7.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4.1.4 |
||||||||||||||||
|
range: 0-1.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.4.4.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.5
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosPortDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosPortDSCPTable'
configure the basic QoS Port DSCP Configuration settings for all switch ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.5.1.1 |
||||
|
Configure DSCP ingress translation mode.
0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.5.1.2 |
||||
|
Classification for a port have 4 different values.
range: 0-3, 0: disable,No Ingress DSCP Classification. 1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0. 2: Selected,Classify only selected DSCP for … |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.5.1.3 |
||||
|
Configure the port egress rewriting mode.
range: 0-2 0: Disable,No Egress rewrite. 1: Enable, Rewrite enabled without remapping. 2: Remap DP Unaware , DSCP from analyzer is remapped and frame is remarked with remapped D… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.5.1.4 |
gs2326pplusQosDSCPTable
table.1.3.6.1.4.1.2356.800.3.2328.2.14.6
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosDSCPTable'
configure the basic QoS DSCP based QoS Ingress Classification settings for all switches.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
DSCP mapping table index(1-64).
|
Integer32 Constraints: range: 1-64 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.6.1.1 |
||||
|
Maximum number of supported DSCP values are 64.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.6.1.2 |
||||
|
Controls whether a specific DSCP value is trusted. Only frames with
trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame. 0… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.6.1.3 |
||||
|
QoS class.
range: 0-7, default: 0. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.6.1.4 |
||||
|
Drop Precedence Level.
range: 0-1, default: disable. |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.6.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosDSCPTranslationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosDSCPTranslationTable'
configure the basic QoS DSCP Translation settings for all switches.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
DSCP translation table index(1-64).
|
Integer32 Constraints: range: 1-64 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.1 |
||||
|
Configure global ingress DSCP translation table.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.2 |
||||
|
DSCP at Ingress side can be translated to any of DSCP values.
range: 0-63, default: 0. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.3 |
||||
|
Configure DSCP ingress classification.
0: disable, 1: enable, default: disable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.4 |
||||
|
Controls the remapping for frames with DP level 0.
Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.5 |
||||
|
Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.7.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.8
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosDSCPClassificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosDSCPClassificationTable'
configure the mapping of QoS class to DSCP value.
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Actual QoS class. Index 1~8 mean Qos Class 0~7.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.8.1.1 |
||||||||||||||||
|
DPL. Index 1~2 mean DPL 0~1.
|
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.8.1.2 |
||||||||||||||||
|
Select the classified DSCP value.
range: 0-63, default: 0. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.8.1.3 |
gs2326pplusQosQceTable
table.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2
·
1 row entry
·
39 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosQceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosQceTable'
Create Qos QCE entry.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.1 |
|||||||||||||
|
If the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256. |
Integer32r/w Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.2 |
||||||||||||
|
If the next QCE ID is non zero, the QCE will be placed
before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256. |
Integer32r/w Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.3 |
||||||||||||
|
Indicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.4 |
||||||||||||
|
Value of Tag field can be 'Any', 'Untag' or 'Tag'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.5 |
||||||||||||
|
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.6 |
||||||||||||
|
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.7 |
||||||||||||
|
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.8 |
||||||||||||
|
Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.9 |
||||||||||||
|
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.10 |
||||||||||||
|
Frame Type can have any of the following values:
1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.11 |
||||||||||||
|
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.12 |
||||||||||||
|
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF, default: Any. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.13 |
||||||||||||
|
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF, default: Any. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.14 |
||||||||||||
|
Valid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF, default: Any. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.15 |
||||||||||||
|
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
range: 0000-FFFF, default: Any. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.16 |
||||||||||||
|
IP protocol number: (Other, TCP or UDP) or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.17 |
||||||||||||
|
Ipv4 Protocol is Other.
range: 0-255 default: 0. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.18 |
||||||||||||
|
Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.19 |
||||||||||||
|
Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.20 |
||||||||||||
|
Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.21 |
||||||||||||
|
Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.22 |
||||||||||||
|
Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223. If a port is… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.23 |
||||||||||||
|
Specific IP address in mask format or value 0.0.0.0 is 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.24 |
||||||||||||
|
IPv4 frame fragmented option:
2: yes, 1: no, 0: any. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.25 |
||||||||||||
|
Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.26 |
||||||||||||
|
IP protocol number: (Other, TCP or UDP) or 'Any'.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.27 |
||||||||||||
|
when IPv6 protocol is Other ,
range: 0-255. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.28 |
||||||||||||
|
Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.29 |
||||||||||||
|
Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.30 |
||||||||||||
|
Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.31 |
||||||||||||
|
Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.32 |
||||||||||||
|
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
If a port is configured to match on DMAC/DIP, this field is the Destination IP address. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.33 |
||||||||||||
|
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.34 |
||||||||||||
|
Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.35 |
||||||||||||
|
QoS class: (0-7) or 8: Default.
|
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.36 |
||||||||||||
|
DP Valid Drop Precedence Level can be (0-3) or 4: Default.
|
Integer32r/w Constraints: range: 0-4 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.37 |
||||||||||||
|
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
|
Integer32r/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.38 |
||||||||||||
|
1: active2: notInservice 4: destroy
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.39 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusQosQCLStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusQosQCLStatusTable'
configure the basic QoS DSCP Translation settings for all switches.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
QCL table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.1 |
|
Indicates the QCL user.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.2 |
|
Indicates the index of QCE.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.3 |
|
Indicates the type of frame to look for incomming frames.
Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed. SNAP: Only… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.4 |
|
Indicates the list of ports configured with the QCE.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.5 |
|
Classified QoS class; if a frame matches the QCE it will be put in the
queue. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.6 |
|
Drop Precedence Level; if a frame matches the QCE then DP level will
set to value displayed under DPL column. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.7 |
|
If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.8 |
|
If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.14.10.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVlanPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVlanPortsTable'
Configure Vlan ports Configuration mode.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.1 |
||||||||
|
Configure PVID.
range: 1-4094, default: 1. |
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.2 |
||||||||
|
Configure frame type of switch ports.
0: all, 1: tagged, 2: untagged, default: all. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.3 |
||||||||
|
Configure ingress filtering of switch ports.
0: disable, 1: enable, default:disable . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.4 |
||||||||
|
Configure egress-rule of switch ports.
0: access, 1: hybrid, 2: trunk |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.5 |
||||||||
|
Configure port type of switch ports.
0: c-port, 1: s-custom-port, 2: s-port, 3: unaware. default: c-port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.1.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.1.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVlanPrivateVLANMembershipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVlanPrivateVLANMembershipTable'
Configure Private Vlan Configuration.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
private VLAN Index.
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.1.2.1.1 |
||||||
|
Indicates the ID of this particular private VLAN.
The CreateEntry can be modify, the other entry can't be modify. |
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.1.2.1.2 |
||||||
|
To include the ports in a Private VLAN
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.1.2.1.3 |
||||||
|
1: active
2: notInservice 4: destroy |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.1.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.2
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVlanPortIsolationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVlanPortIsolationTable'
Configure Vlan Port Isolation Configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.2.1.1 |
||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.2.2.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMACbasedVLANConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMACbasedVLANConfTable'
Configure Vlan Port Isolation Configuration.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Indicates the VLAN ID.
|
Integer32r/w Constraints: range: 1-256 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2.1.1 |
||||||
|
Indicates the MAC address.
The CreateEntry can be modify, the other entry can't be modify. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2.1.2 |
||||||
|
Indicates the VLAN ID.
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2.1.3 |
||||||
|
The ports are displayed for each MAC-based VLAN entry.
To include the port in a MAC-based VLAN |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2.1.4 |
||||||
|
1: active
2: notInservice 4: destroy |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.15.3.1.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.1.6
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingPortRelatedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingPortRelatedTable'
Configure IGMP Snooping Port Related Configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the wh… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.1.6.1.1 |
||||
|
Enable/Disable the fast leave on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.1.6.1.2 |
||||
|
Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited |
Integer32r/w Constraints: range: 0-10 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.1.6.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingVLANTable'
Configure IGMP Snooping Vlan Configuration.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The VLAN ID of the entry
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.1 |
||||||||||
|
Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be
selected for IGMP Snooping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.2 |
||||||||||
|
Enable/Disable the IGMP Querier in the VLAN.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.3 |
||||||||||
|
Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IG… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.4 |
||||||||||
|
Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none) |
Integer32r/w Constraints: range: -1--1range: 1-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.5 |
||||||||||
|
Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none) |
Integer32r/w Constraints: range: -1--1range: 1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.6 |
||||||||||
|
Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response … |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.7 |
||||||||||
|
LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 i… |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.8 |
||||||||||
|
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report int… |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.3.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingPortGroupFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingPortGroupFilteringTable'
Configure IGMP Snooping port group filtering.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
IGMP Snooping Port Group Filtering Configuration Index.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.3.2.1.1 |
||||||
|
The logical port for the settings.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.3.2.1.2 |
||||||
|
The IP Multicast Group that will be filtered.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.3.2.1.3 |
||||||
|
1: active
2: notInservice 4: destroy |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.16.3.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2
·
1 row entry
·
10 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingstatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingstatisticTable'
Configure Vlan Port Isolation Configuration.
| Column | Syntax | OID |
|---|---|---|
|
The VLAN ID of the entry.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.1 |
|
Working Querier Version currently.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.2 |
|
Working Host Version currently.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.3 |
|
Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.4 |
|
The number of Transmitted Queries.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.5 |
|
The number of Received Queries.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.6 |
|
The number of Received V1 Reports.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.7 |
|
The number of Received V2 Reports.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.8 |
|
The number of Received V3 Reports.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.9 |
|
The number of Received V2 Leaves.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.2.1.10 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.3
·
1 row entry
·
1 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingRouterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingRouterPortTable'
Configure Vlan Port Isolation Configuration.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.4.3.1.1 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.5
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingGroupsTable'
IGMP Snooping Groups Information .
| Column | Syntax | OID |
|---|---|---|
|
IGMP Snooping Groups Index
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.5.1.1 |
|
VLAN ID of the group.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.5.1.2 |
|
Group address of the group displayed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.5.1.3 |
|
Ports under this group.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.5.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIGMPSnoopingSSMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIGMPSnoopingSSMTable'
The IGMP SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
IGMP Snooping SSM Index
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.1 |
|
VLAN ID of the group.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.2 |
|
Group address of the group displayed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.3 |
|
Ports under this group.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.4 |
|
Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.5 |
|
IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.6 |
|
Indicates the Type. It can be either Allow or Deny.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.16.6.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.1.6
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingPortRelatedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingPortRelatedTable'
Configure MLD Snooping Port Related Configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the wh… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.1.6.1.1 |
||||
|
Enable/Disable the fast leave on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.1.6.1.2 |
||||
|
Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited |
Integer32r/w Constraints: range: 0-10 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.1.6.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingVLANTable'
Configure MLD Snooping Vlan Configuration.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The VLAN ID of the entry
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.1 |
||||||||
|
Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be
selected for MLD Snooping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.2 |
||||||||
|
Enable/Disable the MLD Querier in the VLAN.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.3 |
||||||||
|
Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.4 |
||||||||
|
Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none) |
Integer32r/w Constraints: range: -1--1range: 1-255 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.5 |
||||||||
|
Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none) |
Integer32r/w Constraints: range: -1--1range: 1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.6 |
||||||||
|
Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response … |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.7 |
||||||||
|
LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in… |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.8 |
||||||||
|
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report int… |
Integer32r/w Constraints: range: -1-31744 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.3.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingPortGroupFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingPortGroupFilteringTable'
Configure MLD Snooping port group filtering.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
MLD Snooping Port Group Filtering Configuration Index.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.3.2.1.1 |
||||||
|
The logical port for the settings.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.3.2.1.2 |
||||||
|
The IP Multicast Group that will be filtered.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.3.2.1.3 |
||||||
|
1: active
2: notInservice 4: destroy |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.17.3.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingstatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingstatisticTable'
Configure Vlan Port Isolation Configuration.
| Column | Syntax | OID |
|---|---|---|
|
The VLAN ID of the entry.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.1 |
|
Working Querier Version currently.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.2 |
|
Working Host Version currently.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.3 |
|
Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.4 |
|
The number of Transmitted Queries.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.5 |
|
The number of Received Queries.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.6 |
|
The number of Received V1 Reports.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.7 |
|
The number of Received V2 Reports.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.8 |
|
The number of Received V1 Leaves.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.3
·
1 row entry
·
1 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingRouterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingRouterPortTable'
Configure Vlan Port Isolation Configuration.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.4.3.1.1 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.5
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingGroupsTable'
MLD Snooping Groups Information .
| Column | Syntax | OID |
|---|---|---|
|
MLD Snooping Groups Index
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.5.1.1 |
|
VLAN ID of the group.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.5.1.2 |
|
Group address of the group displayed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.5.1.3 |
|
Ports under this group.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.5.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6
·
1 row entry
·
7 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMLDSnoopingSSMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMLDSnoopingSSMTable'
The MLD SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
MLD Snooping SSM Index
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.1 |
|
VLAN ID of the group.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.2 |
|
Group address of the group displayed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.3 |
|
Ports under this group.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.4 |
|
Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.5 |
|
IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.6 |
|
Indicates the Type. It can be either Allow or Deny.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.17.6.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.1.3
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMVRPortConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMVRPortConfigurationTable'
Configure MVR Port Configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Enable MVR on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.18.1.3.1.1 |
||||
|
Specify the MVR port type on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.18.1.3.1.2 |
||||
|
Enable the fast leave on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.18.1.3.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMVRPortGroupFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMVRPortGroupFilteringTable'
Configure MVR port group filtering.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
MVR Port Group Filtering Configuration Index.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2.1.1 |
||||||
|
The logical port for the settings.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2.1.2 |
||||||
|
The IP Multicast Group that will be allowed.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2.1.3 |
||||||
|
The IP Multicast Group that will be allowed.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2.1.4 |
||||||
|
1: active
2: notInservice 4: destroy |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.18.2.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.3
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMVRGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMVRGroupsTable'
MVR Groups Information .
Indexes
| Column | Syntax | OID |
|---|---|---|
|
MVR Groups Index
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.3.1.1 |
|
VLAN ID of the group.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.18.3.1.2 |
|
Group address of the group displayed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.18.3.1.3 |
|
Ports under this group.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.18.3.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.1.1
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLACPPortConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLACPPortConfigurationTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.1.1.1.1 |
|||||
|
Enable/Disable LACP Mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.19.1.1.1.2 |
||||
|
LACP key : 1-65535. 0 : Auto
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.1.1.1.3 |
||||
|
0 : passive, Listen for LACP packets.
1 : active, Initiate LACP negotiation, and transmit LACP packets each second |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.19.1.1.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLACPSystemStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLACPSystemStatusTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-12 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.1 |
|
|
The Aggregation ID associated with this aggregation instance.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.2 |
|
The system ID (MAC address) of the aggregation partner.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.3 |
|
The Key that the partner has assigned to this aggregation ID.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.4 |
|
The time since this aggregation changed.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.5 |
|
Shows which ports are a part of this aggregation for this switch.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLACPStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLACPStatusTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.1 |
|
|
Enabled means that LACP is enabled and the port link is up.
Disabled means that LACP is not enabled or that the port link is down. Backup means that the port could not join the aggregation group but will join if other… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.2 |
|
The key assigned to this port. Only ports with the same key can aggregate together.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.3 |
|
The Aggregation ID assigned to this aggregation group.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.4 |
|
The partner's System ID.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.5 |
|
The partner's port number connected to this port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.19.3.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusLACPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusLACPStatisticsTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4.1.1 |
|
|
Shows how many LACP frames have been received at each port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4.1.2 |
|
Shows how many LACP frames have been sent from each port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4.1.3 |
|
Shows how many unknown LACP frames have been discarded at each port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4.1.4 |
|
Shows how many illegal LACP frames have been discarded at each port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.19.4.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2
·
1 row entry
·
10 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPCISTNormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPCISTNormalPortTable'
Show CIST Normal Port Configurations.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.1 |
||||||
|
default: 0,
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.2 |
||||||
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.3 |
||||||
|
default: 128,
CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.4 |
||||||
|
default: 0,
0: non-edge 1: edge |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.5 |
||||||
|
default: 1,
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.6 |
||||||
|
default: 0,
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.7 |
||||||
|
default: 0,
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.8 |
||||||
|
default: 0,
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.9 |
||||||
|
default: 2,
0: Forced True 1: Forced False 2: Auto |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.20.6.2.1.10 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.1.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI1NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI1NormalPortTable'
Show MSTI1 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.1.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.1.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.1.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.2.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI2NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI2NormalPortTable'
Show MSTI2 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.2.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.2.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.2.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.3.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI3NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI3NormalPortTable'
Show MSTI3 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.3.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.3.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.3.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.4.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI4NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI4NormalPortTable'
Show MSTI4 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.4.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.4.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.4.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.5.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI5NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI5NormalPortTable'
Show MSTI5 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.5.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.5.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.5.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.6.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI6NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI6NormalPortTable'
Show MSTI6 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.6.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.6.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.6.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.7.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPMSTI7NormalPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPMSTI7NormalPortTable'
Show MSTI7 Normal Port Configurations.
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.7.2.1.1 |
|
Auto: 0,
Specific Path Cost range: 1 - 200000000. |
Integer32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.7.2.1.2 |
|
default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240) |
Integer32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.7.7.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusCISTPortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusCISTPortStateTable'
Show CIST Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.1.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI1PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI1PortStateTable'
Show MSTI1 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.2.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI2PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI2PortStateTable'
Show MSTI2 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.3.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI3PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI3PortStateTable'
Show MSTI3 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.4.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI4PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI4PortStateTable'
Show MSTI4 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.5.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI5PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI5PortStateTable'
Show MSTI5 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.6.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI6PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI6PortStateTable'
Show MSTI6 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.7.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusMSTI7PortStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusMSTI7PortStateTable'
Show MSTI7 Ports and Aggregations State Configurations.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.1 |
|
The switch port number of the logical STP port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.2 |
|
The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.3 |
|
The current STP port role.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.4 |
|
The current STP port state.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.5 |
|
The current STP port path cost.
|
Integer32 Constraints: range: 0-200000000 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.6 |
|
The current STP port Edge Flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.7 |
|
The current STP port point-to-point flag.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.8 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.8.8.2.1.9 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.9
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPPortStatusTable'
Show STP Port Status.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.9.1.1 |
|
The current STP port role of the CIST port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.9.1.2 |
|
The current STP port state of the CIST port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.9.1.3 |
|
The time since the bridge port was last initialized.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.9.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10
·
1 row entry
·
12 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusSTPPortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusSTPPortStatisticsTable'
Show STP Port Statistics.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
table index.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.1 |
|
port, range : 1 - port number.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.2 |
|
The number of MSTP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.3 |
|
The number of RSTP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.4 |
|
The number of legacy STP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.5 |
|
The number of Topology Change Notification BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.6 |
|
The number of MSTP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.7 |
|
The number of RSTP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.8 |
|
The number of legacy STP Configuration BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.9 |
|
The number of Topology Change Notification BPDU's received/transmitted on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.10 |
|
The number of unknown Spanning Tree BPDU's received and discarded on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.11 |
|
The number of illegal Spanning Tree BPDU's received and discarded on the port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.2.20.10.1.12 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.2
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusFilteringDataBaseConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusFilteringDataBaseConfigTable'
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.2.1.1 |
|||||||
|
Configure learning mode of switch ports.
default: 0, 0: auto, 1: disable, 2: secure. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.2.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusFilteringDataBaseStaticMACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusFilteringDataBaseStaticMACTable'
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2.1.1 |
|||||||||
|
VLAN ID, range: 1 - 4094.
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2.1.2 |
||||||||
|
MAC address, format 0a 1b 2c 3d 4e 5f
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2.1.3 |
||||||||
|
To include the ports in a Static MAC Table
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2.1.4 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.3.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusFilteringDataBaseDynamicMACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusFilteringDataBaseDynamicMACTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4.1.1 |
|||||
|
Indicates whether the entry is a static or a dynamic entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4.1.2 |
||||
|
The VLAN ID of the entry.
|
Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4.1.3 |
||||
|
The MAC address of the entry.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4.1.4 |
||||
|
The ports that are members of the entry.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.2.21.1.4.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.1.2
·
1 row entry
·
3 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIPSourceGuardPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIPSourceGuardPortConfigTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.1.2.1.1 |
|||||
|
default: 0
0:disable 1:enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.1.1.2.1.2 |
||||
|
default: 99
0~2: Max Dynamic clients 99:Unlimited |
Integer32r/w Constraints: range: 0-2range: 99-99 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.1.2.1.3 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIPSourceGuardStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIPSourceGuardStaticTable'
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-28 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.1 |
|||||||||||
|
Port, range: 1 - port number.
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.2 |
||||||||||
|
VLAN ID, range: 1 - 4094.
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.3 |
||||||||||
|
IP address allowed for doing IP source guard.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.4 |
||||||||||
|
Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.5 |
||||||||||
|
1: active
2: notInservice 3: edit 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.1.2.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusIPSourceGuardDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusIPSourceGuardDynamicTable'
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3.1.1 |
|
| Integer32 Constraints: range: 1-10 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3.1.2 |
|
| Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3.1.3 |
|
| SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3.1.4 |
|
| SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.1.3.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.1.2
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusARPInspectionConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusARPInspectionConfTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.1.2.1.1 |
|||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.1.2.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusARPInspectionStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusARPInspectionStaticTable'
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.1 |
|||||||||||
|
Port, range: 1 - port number.
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.2 |
||||||||||
|
VLAN ID, range: 1 - 4094.
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.3 |
||||||||||
|
IP address allowed for doing ARP request.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.4 |
||||||||||
|
Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.5 |
||||||||||
|
1: active
2: notInservice 3: edit 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.2.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusARPInspectionDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusARPInspectionDynamicTable'
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3.1.1 |
|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3.1.2 |
|
| Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3.1.3 |
|
| SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3.1.4 |
|
| SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.2.3.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3
·
1 row entry
·
8 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusARPStaticGatewayCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusARPStaticGatewayCtrlTable'
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.1 |
|||||||||||
|
Source IP address.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.2 |
||||||||||
|
Source MAC address , format 0a 1b 2c 3d 4e 5f
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.3 |
||||||||||
|
Port, range: 1 - port number.
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.4 |
||||||||||
|
default: 0
0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.5 |
||||||||||
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.6 |
|||||||||||
|
default: 0
0: none 1: reopen |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.7 |
||||||||||
|
1: active
2: notInservice 3: edit 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.6.3.1.8 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusARPSpoofingPreventionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusARPSpoofingPreventionTable'
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.1 |
|||||||||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.2 |
||||||||||
|
default: 1, range: 1-100
|
Integer32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.3 |
||||||||||
|
default: 0
0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.4 |
||||||||||
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.5 |
|||||||||||
|
default: 0
0: none 1: reopen |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.2.7.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.1.2
·
1 row entry
·
2 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusDHCPSnoopingPortModeConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusDHCPSnoopingPortModeConfigurationTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.1.2.1.1 |
|||||
|
default: 1
0: trust port mode 1: untrust port mode |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.3.1.2.1.2 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2
·
1 row entry
·
26 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusDHCPSnoopingStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusDHCPSnoopingStatisticsTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.1 |
|||||
|
default: 0
0: none 1: clear |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.2 |
||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.3 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.4 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.5 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.6 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.7 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.8 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.9 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.10 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.11 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.12 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.13 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.14 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.15 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.16 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.17 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.18 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.19 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.20 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.21 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.22 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.23 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.24 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.25 |
|||||
| SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.3.2.1.26 |
.1.3.6.1.4.1.2356.800.3.2328.3.4.1.5.2
·
1 row entry
·
4 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusDHCPRelayConfigurationGatewaysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusDHCPRelayConfigurationGatewaysTable'
Create DHCP Relay Gateway IP address entry.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-6 |
.1.3.6.1.4.1.2356.800.3.2328.3.4.1.5.2.1.1 |
|||||||||
|
VLAN ID
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.4.1.5.2.1.2 |
||||||||
|
DHCP GIADDR address.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2356.800.3.2328.3.4.1.5.2.1.3 |
||||||||
|
1: active
2: notInservice 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.4.1.5.2.1.4 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortSecLimitCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortSecLimitCtrlTable'
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.1 |
|||||||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.2 |
||||||||
|
default: 4, range: 1-1024
|
Integer32r/w Constraints: range: 1-1024 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.3 |
||||||||
|
default: 0
0: none 1: trap 2: shutdown 3: trap&shutdown |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.4 |
||||||||
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.5 |
|||||||||
|
default: 0
0: none 1: reopen |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.5.1.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortSecSwitchStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortSecSwitchStatusTable'
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2.1.1 |
|
|
Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2.1.2 |
|
Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2.1.3 |
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2.1.4 |
|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.2.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusPortSecPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusPortSecPortStatusTable'
| Column | Syntax | OID |
|---|---|---|
| Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.1 |
|
| SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.2 |
|
| Integer32 Constraints: range: 1-4094 |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.3 |
|
|
Blocked / Forwarding
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.4 |
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.5 |
|
| SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.5.3.2.1.6 |
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3
·
1 row entry
·
8 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusAccessMgtConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusAccessMgtConfTable'
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Set Access Management config index
range : 1-16. |
Integer32r/w Constraints: range: 1-16 |
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.1 |
||||||||||
|
0: ipv4
1: ipv6 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.2 |
||||||||||
|
Start IP address.
IP address doesn't allowed all zero or all 'ff'H. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.3 |
||||||||||
|
End IP address.
IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.4 |
||||||||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.5 |
||||||||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.6 |
||||||||||
|
default: 0
0: disable 1: enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.7 |
||||||||||
|
1: active
2: notInservice 3: edit 4: destroy 5: undo |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.6.1.3.1.8 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.3
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusRADIUSAuthenticationServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusRADIUSAuthenticationServerTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
RADIUS Authentication Server index
range : 1-5. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.3.1.1 |
||||
|
Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable
can be set, when IP and Secret have value |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.10.3.1.2 |
||||
|
The IP address or hostname of the RADIUS Authentication Server.
IP address is expressed in dotted decimal notation. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.3.1.3 |
||||
|
The UDP port to use on the RADIUS Authentication Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.3.1.4 |
||||
|
The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.3.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.4
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusRADIUSAccountingServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusRADIUSAccountingServerTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
RADIUS Accounting Server index
range : 1-5. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.4.1.1 |
||||
|
Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable
can be set, when IP and Secret have value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.10.4.1.2 |
||||
|
The IP address or hostname of the RADIUS Accounting Server.
IP address is expressed in dotted decimal notation. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.4.1.3 |
||||
|
The UDP port to use on the RADIUS Accounting Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.4.1.4 |
||||
|
The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.4.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.5
·
1 row entry
·
5 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusTACACSPlusAuthenticationServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusTACACSPlusAuthenticationServerTable'
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
TACACSPlus Authentication Server index
range : 1-5. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.5.1.1 |
||||
|
Enable/Disable the TACACSPlus Authentication Server. The
TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.10.5.1.2 |
||||
|
The IP address or hostname of the TACACSPlus Authentication Server.
IP address is expressed in dotted decimal notation. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.5.1.3 |
||||
|
The UDP port to use on the TACACSPlus Authentication Server. If the
port is set to 0 (zero), the default port (1812) is used on the TACACSPlus Authentication Server. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.5.1.4 |
||||
|
The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.5.1.5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6
·
1 row entry
·
28 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusRADIUSStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusRADIUSStatisticsTable'
| Column | Syntax | OID |
|---|---|---|
|
RADIUS Authentication Server index
range : 1-5. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.1 |
|
The number of RADIUS Access-Accept packets (valid or invalid) received from the server.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.2 |
|
The number of RADIUS Access-Reject packets (valid or invalid) received from the server.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.3 |
|
The number of RADIUS Access-Challenge packets (valid or invalid) received from the server.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.4 |
|
The number of malformed RADIUS Access-Response packets received from the
server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.5 |
|
The number of RADIUS Access-Response packets containing invalid
authenticators or Message Authenticator attributes received from the server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.6 |
|
The number of RADIUS packets that were received with unknown types from
the server on the authentication port and dropped. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.7 |
|
The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.8 |
|
The number of RADIUS Access-Request packets sent to the server. This
does not include retransmissions. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.9 |
|
The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.10 |
|
The number of RADIUS Access-Request packets destined for the server that
have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Ac… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.11 |
|
The number of authentication timeouts to the server. After a timeout,
the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.12 |
|
IP address and UDP port for the authentication server in question.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.13 |
|
Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enab… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.14 |
|
The time interval (measured in milliseconds) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server. The granularity of this measurement is … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.15 |
|
The number of RADIUS packets (valid or invalid) received from the server.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.16 |
|
The number of malformed RADIUS packets received from the server.
Malformed packets include packets with an invalid length. Bad authenticators or unknown types are not included as malformed access responses. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.17 |
|
The number of RADIUS packets containing invalid authenticators received
from the server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.18 |
|
The number of RADIUS packets of unknown types that were received from
the server on the accounting port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.19 |
|
The number of RADIUS packets that were received from the server on the
accounting port and dropped for some other reason. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.20 |
|
The number of RADIUS packets sent to the server. This does not include
retransmissions. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.21 |
|
The number of RADIUS packets retransmitted to the RADIUS accounting server.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.22 |
|
The number of RADIUS packets destined for the server that have not yet
timed out or received a response. This variable is incremented when a Request is sent and decremented due to receipt of a Response, timeout, or retr… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.23 |
|
The number of accounting timeouts to the server. After a timeout, the
client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeo… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.24 |
|
IP address and UDP port for the accounting server in question.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.25 |
|
Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enab… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.26 |
|
The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS accounting server. The granularity of this measurement is 100 ms. A value of 0 ms indicates t… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.27 |
|
Clears the counters for the server.
read: always 0 clear: set 1 |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.2356.800.3.2328.3.10.6.1.28 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusNASPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusNASPortConfigTable'
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port, range : 1 - port number.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.1 |
||||||||||||||
|
This selection controls the port's authentication mode.
1: Force Authorized, 2: Force Unauthorized, 3: Port-based 802.1X, 4: Single 802.1X, 5: Multi 802.1X, 6: MAC-based Auth, 7: MAC-based Single Auth. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.2 |
||||||||||||||
|
When RADIUS-Assigned QoS is both globally enabled and enabled (checked)
on a given port, the switch reacts to QoS Class information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.3 |
||||||||||||||
|
When RADIUS-Assigned VLAN is both globally enabled and enabled (checked)
for a given port, the switch reacts to VLAN ID information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a su… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.4 |
||||||||||||||
|
When Guest VLAN is both globally enabled and enabled (checked) for a given port,
the switch considers moving the port into the Guest VLAN according to the rules outlined below. Admin State supported : Port-based , Sing… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.5 |
||||||||||||||
|
Globally Disabled: NAS is globally disabled.
Link Down: NAS is globally enabled, but there is no link on the port. Authorized: The port is in Force Authorized or a single-supplicant mode and the supplicant is authorize… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.6 |
||||||||||||||
|
Schedules a reauthentication whenever the quiet-period of the port runs out
(EAPOL-based authentication). For MAC-based authentication, reauthentication will be attempted immediately.The button only has effect for suc… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.7 |
||||||||||||||
|
Forces a reinitialization of the clients on the port and thereby a reauthentication
immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.8 |
||||||||||||||
|
When Fallback is enabled, the switch will take over the supplicants role
after max reauthentication count is reached and tries to authenticate the client on its behalf as described for MAC-based Auth. Admin State suppor… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.1.13.1.101 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2
·
1 row entry
·
6 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusNASSwitchStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusNASSwitchStatusTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The port's current administrative state. Refer to NAS Admin State for a description of possible values.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.2 |
|
The current state of the port. Refer to NAS Port State for a description of the individual states.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.3 |
|
The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication,
and the most recently received frame from a new client for MAC-based authentication. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.4 |
|
The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame
for EAPOL-based authentication, and the source MAC address from the most recently received frame from a new clien… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.5 |
|
QoS Class assigned to the port by the RADIUS server if enabled.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.6 |
|
The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.2.1.7 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1
·
1 row entry
·
20 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusNASPortStatusCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusNASPortStatusCountersTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The number of valid EAPOL frames of any type that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.2 |
||||
|
The number of valid EAPOL Response Identity frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.3 |
||||
|
The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.4 |
||||
|
The number of EAPOL Start frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.5 |
||||
|
The number of valid EAPOL Logoff frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.6 |
||||
|
The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.7 |
||||
|
The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.8 |
||||
|
The number of EAPOL frames of any type that have been transmitted by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.9 |
||||
|
The number of EAPOL Request Identity frames that have been transmitted by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.10 |
||||
|
The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.11 |
||||
|
802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the ba… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.12 |
||||
|
802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant. MAC-based: Not applicable. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.13 |
||||
|
Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the backend server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.14 |
||||
|
Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the backend server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.15 |
||||
|
802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible ret… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.16 |
||||
|
The MAC address of the last supplicant/client.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.17 |
||||
|
The VLAN ID on which the last frame from the last supplicant/client was received.
|
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.18 |
||||
|
802.1X-based: The protocol version number carried in the most recently
received EAPOL frame. MAC-based: Not applicable. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.19 |
||||
|
802.1X-based: The user name (supplicant identity) carried in the most recently received
Response Identity EAPOL frame. MAC-based: Not applicable. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.20 |
||||
|
Clear the counters for the selected port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.1.1.21 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2
·
1 row entry
·
21 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusNASPortStatusClientsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusNASPortStatusClientsTable'
| Column | Syntax | OID |
|---|---|---|
|
Entry of client table in the port.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.1 |
|
Shows the identity of the supplicant, as received in the Response Identity
EAPOL frame.This isn't available for MAC-based Auth. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.2 |
|
Multi 802.1X, this column holds the MAC address of the attached supplicant.
MAC-based Auth., this column holds the MAC address of the attached client. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.3 |
|
This column holds the VLAN ID that the corresponding client is currently
secured through the Port Security module. |
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.4 |
|
The client can either be authenticated or unauthenticated. In the authenticated
state, it is allowed to forward frames on the port, and in the unauthenticated state, it is blocked. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.5 |
|
Shows the date and time of the last authentication of the client.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.6 |
|
The number of valid EAPOL frames of any type that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.7 |
|
The number of valid EAPOL Response Identity frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.8 |
|
The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.9 |
|
The number of EAPOL Start frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.10 |
|
The number of valid EAPOL Logoff frames that have been received by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.11 |
|
The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.12 |
|
The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.13 |
|
The number of EAPOL frames of any type that have been transmitted by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.14 |
|
The number of EAPOL Request Identity frames that have been transmitted by the switch.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.15 |
|
The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.16 |
|
802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the ba… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.17 |
|
802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant. MAC-based: Not applicable. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.18 |
|
Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the backend server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.19 |
|
Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the backend server. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.20 |
|
802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible ret… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2356.800.3.2328.3.11.3.2.1.21 |
gs2326pplusVeriPHYTable
table.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2
·
1 row entry
·
9 columns
Uses the lancom variant from
Command help
/opt/observium/mibs/lancom.
Walk gs2326pplusVeriPHYTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LANCOM-GS-2326PPLUS-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LANCOM-GS-2326PPLUS-MIB::gs2326pplusVeriPHYTable'
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The length (in meters) of the cable pair.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.1 |
|
The status of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.2 |
|
The length (in meters) of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.3 |
|
The status of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.4 |
|
The length (in meters) of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.5 |
|
The status of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.6 |
|
The length (in meters) of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.7 |
|
The status of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.8 |
|
The length (in meters) of the cable pair.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2356.800.3.2328.4.5.9.2.1.9 |