LANCOM-AUTHENTICATION-MANAGER-MIB Table View

The interface configuration for authentication manager

agentAuthMgrInterfaceConfigMethodEntry row .1.3.6.1.4.1.2356.16.1.61.2.1.1

The authentication manager interface config entry.

Indexes

agentAuthMgrIfIndex methodIndex

Column	Syntax	OID
agentAuthMgrIfIndex The interface index for which the authentication manager config is required.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2356.16.1.61.2.1.1.1
methodIndex The index of the configuration method.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.2.1.1.2
agentAuthMgrMethodOrder The authentication methods allowed for order configuration.	Enumerationr/w Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.2.1.1.3
agentAuthMgrMethodPriority The authentication methods allowed for priority configuration.	Enumerationr/w Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.2.1.1.4

The interface configuration for authentication manager

agentAuthMgrInterfaceConfigTimerEntry row .1.3.6.1.4.1.2356.16.1.61.2.2.1

The Authentication Manager Interface config entry.

Indexes

agentAuthMgrTimerIfIndex

Column	Syntax	OID
agentAuthMgrTimerIfIndex The interface ifIndex for which the authentication manager config is required.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2356.16.1.61.2.2.1.1
agentAuthMgrRestart The authentication restart timer value.	secondsUnsigned32r/w Constraints: range: 10-65535	.1.3.6.1.4.1.2356.16.1.61.2.2.1.2

The interface authentication configuration for authentication manager

agentAuthMgrInterfaceConfigAuthenticationEntry row .1.3.6.1.4.1.2356.16.1.61.2.3.1

The authentication manager interface authentication config entry.

Indexes

agentAuthMgrIfIndex

Column	Syntax	OID
agentAuthMgrPortControlMode Port Control mode of this port. The port control mode for this interface can take the following values: forceUnauthorized(1) - the port is in unauthorized mode, auto(2) - Authentication is enforced on the port. If a cli…	AuthMgrPortControlModer/w Type Values: 1 forceUnauthorized 2 auto 3 forceAuthorized	.1.3.6.1.4.1.2356.16.1.61.2.3.1.1
agentAuthMgrPortHostMode Port Host mode of this port. The port Host mode for this interface can take the following values: singleHost(1) - only one client can be authenticated on this port. multiHost(2) - only on client authenticates on this p…	AuthMgrPortHostModer/w Type Values: 1 singleHost 2 multiHost 3 multiAuth 4 multiDomain 5 multiDomainMultiHost	.1.3.6.1.4.1.2356.16.1.61.2.3.1.2
agentAuthMgrPortNoResponseVlanId Specifies the no response VLAN of the port. For multiHost and multiDomainMultiHost the port will be moved to this VLAN if no client sucessfully authenticates on that port for the no-response period. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.2.3.1.3
agentAuthMgrPortAuthFailVlanId Specifies the authentication failure VLAN of the port. A port will be moved to this VLAN if a 802.1x client authenticates unsucessfully on that port. A value of zero indicates authentication failure VLAN is not configu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.2.3.1.4
agentAuthMgrPortMaxUsers Specifies the maximum users or clients that can authenticate on this port when the port control mode is in multi-auth host mode.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.2.3.1.5
agentAuthMgrPortAuthViolationMode Sets the authentication violation mode that occur when a new device connects to a port after the maximum number of devices are connected to that port.	Enumerationr/w Enumerated Values: 1 protect 2 restrict 3 shutdown	.1.3.6.1.4.1.2356.16.1.61.2.3.1.6
agentAuthMgrPortCriticalVlanId Specifies the critical VLAN of the port. A port will be moved to its critical VLAN if all RADIUS authentication servers are found to be Dead. A value of zero indicates no critical VLAN is configured for the port and t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.2.3.1.7
agentAuthMgrPortAuthServerDeadAction Specifies the action to take on authenticating supplicants when all RADIUS servers are found dead.	Enumerationr/w Enumerated Values: 1 reinitialize 2 authorize 3 none	.1.3.6.1.4.1.2356.16.1.61.2.3.1.8
agentAuthMgrPortAuthServerAliveAction Specifies the action to take on authenticating supplicants when one RADIUS server comes back Alive after all of them were found dead earlier.	Enumerationr/w Enumerated Values: 1 reinitialize 2 none	.1.3.6.1.4.1.2356.16.1.61.2.3.1.9
agentAuthMgrPortAuthServerDeadVoiceAction Specifies the action to take on authenticating VoIP supplicants when all RADIUS servers are found dead.	Enumerationr/w Enumerated Values: 1 authorize 2 none	.1.3.6.1.4.1.2356.16.1.61.2.3.1.10
agentAuthMgrPortInitialize The initialization control for this Port. Setting this object 'true' causes the Port to be reinitialized, terminating (and potentially restarting) authentication exchanges. The object value reverts to 'false' once ini…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2356.16.1.61.2.3.1.11
agentAuthMgrPortUnauthDHCPAllow Specifies whether to allow DHCP packets on the port even if it is unauthorized.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.61.2.3.1.12
agentAuthMgrPortAuthenticationOpen Specifies whether Open Authentication is enabled on the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.61.2.3.1.13

The interface configuration for authentication manager

agentAuthMgrInterfaceStatusEntry row .1.3.6.1.4.1.2356.16.1.61.3.1.1

The authentication manager interface config entry.

Indexes

agentAuthMgrIfIndex methodIndex

Column	Syntax	OID
agentAuthMgrStatusMethodOrder The authentication methods allowed for order configuration.	Enumeration Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.3.1.1.1
agentAuthMgrStatusMethodPriority The authentication methods allowed for priority configuration.	Enumeration Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.3.1.1.2

A table for auth mgr client details and associated functionality.

agentAuthMgrClientStatusEntry row .1.3.6.1.4.1.2356.16.1.61.4.1.1

Represents entry for port config table.

Indexes

agentAuthMgrClientMacAddress

Column	Syntax	OID
agentAuthMgrClientMacAddress Specifies the MAC address of the client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.61.4.1.1.1
agentAuthMgrLogicalPort Specifies the logical port number of the client connection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.2
agentAuthMgrInterface Specifies the physical interface to which the client is attached.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.3
agentAuthMgrClientAuthstatus The authentication status of the client.	Enumeration Enumerated Values: 1 authorized 2 unauthorized	.1.3.6.1.4.1.2356.16.1.61.4.1.1.4
agentAuthMgrClientAuthMethod The method using which the client is authenticated.	Enumeration Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.4.1.1.5
agentAuthMgrClientAuthState The authentication state of the client.	Enumeration Enumerated Values: 1 success 2 failed 3 running	.1.3.6.1.4.1.2356.16.1.61.4.1.1.6
agentAuthMgrClientUserName Specifies the username with which the client is authenticated to the Radius server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.7
agentAuthMgrClientVlanAssigned Specifies the VLAN the client is associated with by Auth Mgr. This value is only valid when the client is in authenticated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.8
agentAuthMgrClientAuthVlanAssignedReason The VLAN assigned reason for the authenticated client.	Enumeration Enumerated Values: 1 radius 2 authFailVlan 3 noResponseVlan 4 voiceVlan 5 monitorVlan 6 criticalVlan 7 none	.1.3.6.1.4.1.2356.16.1.61.4.1.1.9
agentAuthMgrClientSessionTime Specifies the time elapsed in seconds since the client was authenticated in this session.This value is only valid when the client is in authenticated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.10
agentAuthMgrClientFilterID Specifies the Filter ID or Diffserv Policy name to be applied to the session. This value is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated st…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.11
agentAuthMgrClientDACL Specifies the Downloadble ACL to be applied to the session. This value is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.12
agentAuthMgrClientSessionTimeout Specifies the session time out value if assigned by the Radius server. A value of 0 indicates that no session timeout was assigned by the RADIUS server. This value is only valid when the client is in authenticated sta…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.13
agentAuthMgrClientTerminationAction Specifies the session termination action assigned by the Radius Server.This is the action taken when the session times out. This value is only valid when the client is in authenticated state.	AuthMgrSessionTerminationAction Type Values: 1 default 2 reauthenticate	.1.3.6.1.4.1.2356.16.1.61.4.1.1.14
agentAuthMgrClientAcctSessionId Specifies the Accounting Session Id used by the session.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.15
agentAuthMgrClientRedirectACL Specifies the Redirect ACL to be applied to the session. This value is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.16
agentAuthMgrClientRedirectURL Specifies the Redirect URL applicable to the session. This value is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.4.1.1.17
agentAuthMgrClientSessionTimeLeft Specifies the time left for the session termination action to occur. This value is only valid when the client is in authenticated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.4.1.1.19

A table to display history of the authentication manager.

agentAuthMgrPortAuthHistoryResultEntry row .1.3.6.1.4.1.2356.16.1.61.5.1.1

Represents authentication manager results in history table.

Indexes

agentAuthMgrAuthHistoryResultIfaceIndex agentAuthMgrAuthHistoryResultIndex

Column	Syntax	OID
agentAuthMgrAuthHistoryResultIfaceIndex This object represents the physical bridge port on which authentication event might be received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.5.1.1.1
agentAuthMgrAuthHistoryResultIndex Reference to the authentication manager authentication history table maintained.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.5.1.1.2
agentAuthMgrAuthHistoryResultTimeStamp Specifies the exact time of authentication manager authentication event information occurred maintained in the history table.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2356.16.1.61.5.1.1.3
agentAuthMgrAuthHistoryResultMacAddress Specifies the client MAC address maintained in the authentication history table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2356.16.1.61.5.1.1.4
agentAuthMgrAuthHistoryResultAuthMethod The method using which the client is authenticated.	Enumeration Enumerated Values: 0 undefined 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.5.1.1.5
agentAuthMgrAuthHistoryResultAuthStatus Specifies the authentication manager authentication status (Success or Failure) for the authentication manager authentication event takes place.	Enumeration Enumerated Values: 1 success 2 failure	.1.3.6.1.4.1.2356.16.1.61.5.1.1.6
agentAuthMgrAuthHistoryResultAge Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.5.1.1.7
agentAuthMgrAuthHistoryResultVlanId Specifies the VLANID associated with the client if authenticated successfully.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.5.1.1.8
agentAuthMgrAuthHistoryResultAccessStatus Authentication access status indicates the exact status of the dot1x client. Granted means the client is allowed access to the network using dot1x or monitor mode. Denied means the client is not allowed access to the…	Enumeration Enumerated Values: 1 granted 2 denied	.1.3.6.1.4.1.2356.16.1.61.5.1.1.9
agentAuthMgrAuthHistoryResultFilterID Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.5.1.1.10
agentAuthMgrAuthHistoryResultDACL Specifies the Downloadable Access Control List name assigned by the RADIUS server. This value is only valid when the client is in authenticated state.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2356.16.1.61.5.1.1.11
agentAuthMgrAuthHistoryResultVlanAssignedType Specifies the VLAN Assigned Reason maintained in the history table.	Enumeration Enumerated Values: 1 default 2 radius 3 unauthenticatedVlan 4 guestVlan 5 voiceVlan 6 monitorVlan 7 notAssigned	.1.3.6.1.4.1.2356.16.1.61.5.1.1.12
agentAuthMgrAuthHistoryResultReasonCode Specifies the authentication reason refered by the result index on a port.	Enumeration Enumerated Values: 0 none 1 supplicant-timeout 2 eapol-timeout 3 radius-request-timeout 4 radius-auth-failure 5 radius-auth-comm-failure 6 radius-challenge-process-invalid-nas-port 7 radius-challenge-process-wrong-eap-msg 8 radius-request-send-msg-error 9 radius-accept-process-invalid-nas-port 10 radius-accept-process-wrong-eap-msg 11 radius-accept-filter-assignment-failure 12 radius-accept-diffserv-not-present 13 radius-accept-vlan-assignment-failure 14 vlan-assignment-feature-not-enabled 15 radius-success 16 local-auth-user-not-found 17 local-auth-user-no-access 18 local-auth-md5-validation-failure 19 local-auth-invalid-eap-type 20 local-failure 21 local-success 22 radius-invalid-radius-status 23 guest-vlan-timer-expiry 24 undefined-auth-method 25 reject-auth-method 26 invalid-auth-method 27 auth-method-not-configured 28 unauth-vlan-not-created 29 guest-vlan-not-created 30 radius-accept-invalid-vlan-failure 31 eapol-request-id-timeout 32 all-radius-servers-dead 33 client-disconnected 34 guest-vlan-success 35 unauth-vlan-success 36 critical-vlan-success 37 monitor-success 38 dacl-apply-failure 39 open-success	.1.3.6.1.4.1.2356.16.1.61.5.1.1.13

A table to clear the authentication manager authentication history 
per interface.

agentAuthMgrPortAuthHistoryResultClearEntry row .1.3.6.1.4.1.2356.16.1.61.5.3.1

Represents to clear the authentication manager authentication results for an
authentication manager authentication history table.

Indexes

agentAuthMgrAuthHistoryResultIfIndex

Column	Syntax	OID
agentAuthMgrAuthHistoryResultIfIndex This object represents the physical Bridge Port on which authentication event might be received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.5.3.1.1
agentAuthMgrPortAuthHistoryResultsClear When set to enable(1), all authentication manager authentication history information for the given port will be reset. The value is write-only. Attempt to read will return disable(2).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.61.5.3.1.2

A table to display the authentication manager statistics.

agentAuthMgrPortStatsEntry row .1.3.6.1.4.1.2356.16.1.61.6.1.1

Represents authentication manager statistics per port.

Indexes

agentAuthMgrPortIfaceIndex agentAuthMgrPortMethodIndex

Column	Syntax	OID
agentAuthMgrPortIfaceIndex This object represents the physical bridge port on which statistics are retrieved.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.6.1.1.1
agentAuthMgrPortMethodIndex The index of the authentication method for which statistics are reviewed.	Enumeration Enumerated Values: 1 dot1x 2 mab	.1.3.6.1.4.1.2356.16.1.61.6.1.1.2
agentAuthMgrPortStatsAttempts Specifies the number of successful authentications events of specified method on specified port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.6.1.1.3
agentAuthMgrPortStatsFailedAttempts Specifies the number of unsuccessful authentications attempts of specified method on specified port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2356.16.1.61.6.1.1.4

A table to clear the authentication manager statistics.

agentAuthMgrPortStatsClearEntry row .1.3.6.1.4.1.2356.16.1.61.6.2.1

Represents to clear the authentication manager statistics per interface.

Indexes

agentAuthMgrPortIfaceIndex

Column	Syntax	OID
agentAuthMgrPortStatsClear When set to enable(1), all authentication manager statistics for the given port will be reset. The value is write-only. Attempt to read will return disable(2).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2356.16.1.61.6.2.1.2