L2L3-VPN-MULTICAST-MIB

        This MIB module defines a table representing the attribute
information of the provider tunnels (P-tunnels) on a PE router.
This MIB module will be used by other MIB modules designed for
monitoring and/or configuring Border Gateway
Protocol/Multiprotocol Label Switching
        
Layer 2 and Layer 3 Virtual Private
Network that support multicast (L2L3VpnMCast network).
        
Copyright (c) 2018 IETF Trust and the persons identified
as authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
    
Source file
L2L3-VPN-MULTICAST-MIB
Last revised
Identity
l2L3VpnMcastMIB
Base OID
1.3.6.1.2.1.245
Imported Objects
L2L3-VPN-MULTICAST-TC-MIB L2L3VpnMcastProviderTunnelId L2L3VpnMcastProviderTunnelType
MPLS-TC-STD-MIB MplsLabel
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) zeroDotZero
SNMPv2-TC RowPointer
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'L2L3-VPN-MULTICAST-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'L2L3-VPN-MULTICAST-MIB::l2L3VpnMcastMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'L2L3-VPN-MULTICAST-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'L2L3-VPN-MULTICAST-MIB::l2L3VpnMcastMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (13)
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (2)
Support of these objects is required.
.1.3.6.1.2.1.245.2.2.1
Support of these objects is optional.
.1.3.6.1.2.1.245.2.2.2
Compliance Statements (2)

OID .1.3.6.1.2.1.245.2.1.1
The core compliance statement for SNMP entities
that implement the L2L3-VPN-MULTICAST-MIB module.
Required groups

OID .1.3.6.1.2.1.245.2.1.2
The full compliance statement for SNMP entities
that implement the L2L3-VPN-MULTICAST-MIB module.
Required groups