Juniper-System-MIB Table View

Table of subsystems.  A subsystem supports a 'family' of module types;
that is, each module type is supported by a particular software
subsystem.  For example, the ERX channelized T1 line card (CT1-FULL) is
supported by the 'ct1' subsystem.

juniSystemSubsystemEntry row .1.3.6.1.4.1.4874.2.2.2.1.2.1.1

A table entry containing information pertaining to a subsystem.
Subsystem information takes precedence over system-wide information, but
not over individual module information.

Indexes

juniSystemSubsystemIndex

Column	Syntax	OID
juniSystemSubsystemIndex Arbitrary subsystem identification number.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.1
juniSystemSubsystemName The name of the subsystem.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.2
juniSystemSubsystemBootReleaseFile The boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the system-wide boot release file (juniSystemBoo…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.3
juniSystemSubsystemBootBackupReleaseFile The backup boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the system-wide boot backup release file…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.4

A table of system module slot physical container configuration
information.

juniSystemSlotEntry row .1.3.6.1.4.1.4874.2.2.2.1.3.3.1

A table entry describing the physical status of a system module slot
container, which is designated by its slot and level positions. There
is an entry in this table for all index pairs from { 0, 1 } to the
maximum for …

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column	Syntax	OID
juniSystemSlotNumber The slot number. The actual upper limit of valid values is juniSystemMaxSlotNumber. Note that slot numbers are zero-based.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.1
juniSystemSlotLevel The relative position of a module or sub-module 'container' within a slot.	JuniSystemSlotLevel Type Constraints: range: 1..4	.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.2
juniSystemSlotStatus The status of the module slot container. unknown - The existence of a container cannot be determined noSlotContainer - The physical container does not exist empty - No module …	Enumeration Enumerated Values: 0 unknown 1 noSlotContainer 2 empty 3 moduleNotPresent 4 modulePresent	.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.3
juniSystemSlotType The category of modules that can be configured for the container.	JuniSystemSlotType Type Values: 0 noSlot 1 erxSrpSlot 2 erxLcmSlot 3 erxSrpIoaSlot 4 erxLcIoaSlot 16 es2SrpSlot 17 es2SfsSlot 18 es2FmSlot 19 es2SrpIoaSlot 20 es2FIoaSlot	.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.4

A table of system module and sub-module information.  In this table, a
module refers to a physical module (board) or a sub-module.
          
A physical board may contain a single module or multiple sub-modules.
For example, an ERX line card is a single module and appears as single
entry in this table.  An I/O adapter is a module that doesn't provide
any operaitonal state information and it also appears as a single entry
in this table.  A second generation E-series SRP/SFS hardware module
contains two sub-modules, each with its own operational state
information: a System Resource Processor (SRP) sub-module and a Switch
Fabric Slice (SFS) sub-module, which appear as two separate entries in
this table, one for each sub-module.

juniSystemModuleEntry row .1.3.6.1.4.1.4874.2.2.2.1.3.4.1

A table entry that provides information about a specific system module
or sub-module in a particular module location. There are only entries
in this table for module locations that report a juniSystemSlotStatus of
modu…

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column	Syntax	OID
juniSystemModuleOperStatus The current operational status of the module (or sub-module): unknown - The status of the module cannot be determined notPresent - No hardware is currently present but there was a module previou…	Enumeration Enumerated Values: 0 unknown 1 notPresent 2 disabled 3 hardwareError 4 booting 5 initializing 6 online 7 standby 8 inactive 9 notResponding	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1
juniSystemModuleDisableReason Indicates the condition causing the module (or sub-module) to be disabled: none - Value when the module is not disabled unknown - Unknown reason for disablement assessing - The module cont…	Enumeration Enumerated Values: 0 none 1 unknown 2 assessing 3 admin 4 typeMismatch 5 fabricLimit 6 imageError	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.2
juniSystemModuleLastChange The value of sysUpTime when the value of juniSystemModuleOperStatus last changed.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.3
juniSystemModuleCurrentType The personality of this module based on the combination of modules that are currently inserted in the slot. This could be different from the personality reported in juniSystemModuleExpectedType, in which case it may be…	JuniSystemModuleType Type Values: 0 unknown 1 erxSrp 2 erxCt3 3 erxOc3 4 erxUt3Atm 5 erxUt3Frame 6 erxUe3Atm 7 erxUe3Frame 8 erxCe1 9 erxCt1 10 erxDpfe 11 erxOc12Pos 12 erxOc12Atm 13 erxOc3Pos 14 erxOc3Atm 15 erxGe 16 erxFe8 17 erxOc3oc12Pos 18 erxOc3oc12Atm 19 erxCoc3oc12 20 erxCoc3 21 erxCoc12 22 erxOc12Server 23 erxHssi 24 erxGeFe 25 erxCt3P12 26 erxV35 27 erxUt3f12 28 erxUe3f12 29 erxCoc12F3 30 erxCoc3F3 31 erxCocxF3 32 erxVts 33 erxOc48 34 erxUt3Atm4 35 erxHybrid 36 erxOc3AtmGe 37 erxOc3AtmPos 38 erxGe2 39 erxGeHde 1024 erxSrpIoa 1025 erxCt1Ioa 1026 erxCe1Ioa 1027 erxCe1TIoa 1028 erxCt3Ioa 1029 erxE3Ioa 1030 erxOc3Mm2Ioa 1031 erxOc3Sm2Ioa 1032 erxOc3Mm4Ioa 1033 erxOc3SmIr4Ioa 1034 erxOc3SmLr4Ioa 1035 erxCOc3Mm4Ioa 1036 erxCOc3SmIr4Ioa 1037 erxCOc3SmLr4Ioa 1038 erxOc12Mm1Ioa 1039 erxOc12SmIr1Ioa 1040 erxOc12SmLr1Ioa 1041 erxCOc12Mm1Ioa 1042 erxCOc12SmIr1Ioa 1043 erxCOc12SmLr1Ioa 1044 erxFe2Ioa 1045 erxFe8Ioa 1046 erxGeMm1Ioa 1047 erxGeSm1Ioa 1048 erxHssiIoa 1049 erxCt3P12Ioa 1050 erxV35Ioa 1051 erxGeSfpIoa 1052 erxUe3P12Ioa 1053 erxT3Atm4Ioa 1054 erxCOc12Mm1ApsIoa 1055 erxCOc12SmIr1ApsIoa 1056 erxCOc12SmLr1ApsIoa 1057 erxOc12Mm1ApsIoa 1058 erxOc12SmIr1ApsIoa 1059 erxOc12SmLr1ApsIoa 1060 erxCOc12AtmPosMm1Ioa 1061 erxCOc12AtmPosSmIr1Ioa 1062 erxCOc12AtmPosSmLr1Ioa 1063 erxCOc12AtmPosMm1ApsIoa 1064 erxCOc12AtmPosSmIr1ApsIoa 1065 erxCOc12AtmPosSmLr1ApsIoa 1066 erxT1E1RedundantIoa 1067 erxT3E3RedundantIoa 1068 erxCt3RedundantIoa 1069 erxOcxRedundantIoa 1070 erxCOcxRedundantIoa 1071 erxOc3Mm4ApsIoa 1072 erxOc3SmIr4ApsIoa 1073 erxOc3SmLr4ApsIoa 1074 erxOc48Ioa 1075 erxOc3Atm2Ge1Ioa 1076 erxOc3Atm2Pos2Ioa 1077 erxGe2Ioa 1078 erxFe8FxIoa 1079 erxGe8Ioa 2048 e320Srp100 2049 e320Sfm100 2050 es2Lm4 2051 es2Lm10Uplink 2052 es2Lm10 2053 e320Srp320 2054 e320Sfm320 2055 es2Lm10s 3072 e320SrpIoa 3073 es2Ge4S1Ioa 3074 es2Oc48Stm16PosS1Ioa 3075 es2ServiceS1Ioa 3076 es2Oc3Stm1x8AtmS1Ioa 3077 es2RedundancyS1Ioa 3078 es2Oc12Stm4x2PosS1Ioa 3079 es2Oc12Stm4x2AtmS1Ioa 3080 es2dash10GeS1Ioa 3081 es2Ge8S1Ioa 3082 es2dash10GePrS2Ioa 3083 es2Ge20S2Ioa 4096 e120Srp120 4097 e120Sfm120	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.4
juniSystemModuleExpectedType The personality for this module position based on the combination of modules that were inserted in this slot when it was last configured. The value of this object will be different than the value of juniSystemModuleCurr…	JuniSystemModuleType Type Values: 0 unknown 1 erxSrp 2 erxCt3 3 erxOc3 4 erxUt3Atm 5 erxUt3Frame 6 erxUe3Atm 7 erxUe3Frame 8 erxCe1 9 erxCt1 10 erxDpfe 11 erxOc12Pos 12 erxOc12Atm 13 erxOc3Pos 14 erxOc3Atm 15 erxGe 16 erxFe8 17 erxOc3oc12Pos 18 erxOc3oc12Atm 19 erxCoc3oc12 20 erxCoc3 21 erxCoc12 22 erxOc12Server 23 erxHssi 24 erxGeFe 25 erxCt3P12 26 erxV35 27 erxUt3f12 28 erxUe3f12 29 erxCoc12F3 30 erxCoc3F3 31 erxCocxF3 32 erxVts 33 erxOc48 34 erxUt3Atm4 35 erxHybrid 36 erxOc3AtmGe 37 erxOc3AtmPos 38 erxGe2 39 erxGeHde 1024 erxSrpIoa 1025 erxCt1Ioa 1026 erxCe1Ioa 1027 erxCe1TIoa 1028 erxCt3Ioa 1029 erxE3Ioa 1030 erxOc3Mm2Ioa 1031 erxOc3Sm2Ioa 1032 erxOc3Mm4Ioa 1033 erxOc3SmIr4Ioa 1034 erxOc3SmLr4Ioa 1035 erxCOc3Mm4Ioa 1036 erxCOc3SmIr4Ioa 1037 erxCOc3SmLr4Ioa 1038 erxOc12Mm1Ioa 1039 erxOc12SmIr1Ioa 1040 erxOc12SmLr1Ioa 1041 erxCOc12Mm1Ioa 1042 erxCOc12SmIr1Ioa 1043 erxCOc12SmLr1Ioa 1044 erxFe2Ioa 1045 erxFe8Ioa 1046 erxGeMm1Ioa 1047 erxGeSm1Ioa 1048 erxHssiIoa 1049 erxCt3P12Ioa 1050 erxV35Ioa 1051 erxGeSfpIoa 1052 erxUe3P12Ioa 1053 erxT3Atm4Ioa 1054 erxCOc12Mm1ApsIoa 1055 erxCOc12SmIr1ApsIoa 1056 erxCOc12SmLr1ApsIoa 1057 erxOc12Mm1ApsIoa 1058 erxOc12SmIr1ApsIoa 1059 erxOc12SmLr1ApsIoa 1060 erxCOc12AtmPosMm1Ioa 1061 erxCOc12AtmPosSmIr1Ioa 1062 erxCOc12AtmPosSmLr1Ioa 1063 erxCOc12AtmPosMm1ApsIoa 1064 erxCOc12AtmPosSmIr1ApsIoa 1065 erxCOc12AtmPosSmLr1ApsIoa 1066 erxT1E1RedundantIoa 1067 erxT3E3RedundantIoa 1068 erxCt3RedundantIoa 1069 erxOcxRedundantIoa 1070 erxCOcxRedundantIoa 1071 erxOc3Mm4ApsIoa 1072 erxOc3SmIr4ApsIoa 1073 erxOc3SmLr4ApsIoa 1074 erxOc48Ioa 1075 erxOc3Atm2Ge1Ioa 1076 erxOc3Atm2Pos2Ioa 1077 erxGe2Ioa 1078 erxFe8FxIoa 1079 erxGe8Ioa 2048 e320Srp100 2049 e320Sfm100 2050 es2Lm4 2051 es2Lm10Uplink 2052 es2Lm10 2053 e320Srp320 2054 e320Sfm320 2055 es2Lm10s 3072 e320SrpIoa 3073 es2Ge4S1Ioa 3074 es2Oc48Stm16PosS1Ioa 3075 es2ServiceS1Ioa 3076 es2Oc3Stm1x8AtmS1Ioa 3077 es2RedundancyS1Ioa 3078 es2Oc12Stm4x2PosS1Ioa 3079 es2Oc12Stm4x2AtmS1Ioa 3080 es2dash10GeS1Ioa 3081 es2Ge8S1Ioa 3082 es2dash10GePrS2Ioa 3083 es2Ge20S2Ioa 4096 e120Srp120 4097 e120Sfm120	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5
juniSystemModuleDescr Textual description of the expected module in this slot.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.6
juniSystemModuleSlotSpan The number of slot positions that the expected module spans. Most modules are only one slot wide, but some require extra space or backplane resources. These modules are identified as being in the lower numbered slot a…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.7
juniSystemModulePortCount The number of physical ports supported by the expected module type in this slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.8
juniSystemModuleSerialNumber The serial number of the expected module in this slot. The serial number of the current module may be found in this module's entPhysicalSerialNum. A serial number is for a hardware board, so if there is more than one …	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.9
juniSystemModuleAssemblyPartNumber The part number of the expected module in this slot. The part number of the current module may be found in this module's entPhysicalModelName. A part number is for a hardware board, so if there is more than one sub-mo…	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.10
juniSystemModuleAssemblyRev The revision level of the expected module in this slot. The revision level of the current module may be found in this module's entPhysicalHardwareRev. A revision level is for a hardware board, so if there is more than…	OctetString Constraints: range: 0-3	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.11
juniSystemModulePhysicalIndex The entPhysicalIndex value assigned to the module. The ENTITY-MIB.entPhysicalTable contains additional information about this module that can be retrieved using this index. An entPhysicalIndex is for a hardware board,…	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.12
juniSystemModuleSoftwareSupport An indicator as to whether this module or sub-module has operational state information that can be managed. If the value of this object is true(1), then there is an entry for this module or sub-module in the juniSystem…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.13
juniSystemModuleRedundancySupport An indicator as to whether this module or sub-module is part of a redundancy group. If the value of this object is true(1), then there is an entry for this module or sub-module in the juniSystemModuleRedundancyTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.14
juniSystemModuleLevelSpan The number of level positions that the expected module spans. Most modules are only one level 'high', but some require extra space or backplane resources. These modules are identified as being in the lower numbered le…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.15

A table of system module software information.  This includes the
version of the software running on the particular module, the running
software's use of the modules resources and the modules operational
state.
          
Some module types don't contain loadable software (they execute
'firmware') but include support for some of the objects in this table.
For example, the E320 SFS (es2Sfs) modules only support
juniSystemModuleAdminStatus and juniSystemModuleControl.  Appropriate
'default' values are returned for the other objects.
          
Some module types don't contain any software related information (e.g.,
ERX I/O adapters do not) in which case their value of
juniSystemModuleSoftwareSupport will be false and there will not be a
corresponding entry in this table.

juniSystemModuleSoftwareEntry row .1.3.6.1.4.1.4874.2.2.2.1.3.5.1

A table entry that provides software information about a specific
system module in a particular slot location.

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column	Syntax	OID
juniSystemModuleSoftwareVersion Version identification of the currently executing operational software on this module. If the module is in a state where the software version is not known (e.g., module type mismatch), then the value of this object wil…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.2
juniSystemModuleCpuUtilPct Last available module CPU utilization percentage. A value of -1 indicates the utilization is unknown. This value is calculated over a 5 second period.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.3
juniSystemModuleMemUtilPct Percentage of module memory utilization. A value of -1 indicates the utilization is unknown.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.4
juniSystemModuleAdminStatus Provides administrative control to enable/disable the module. This object is read-only for certain types of modules.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.5
juniSystemModuleControl Administrative control of this slot: noOperation - Setting this value has no effect. flush - Flushes the configuration associated with a module type that previously occupied this slot. Used to…	Enumerationr/w Enumerated Values: 0 noOperation 1 flush 2 reset 3 resetBackup	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6
juniSystemModuleBootReleaseFile The boot release file name for this slot, with extension '.rel'. If a file name is specified (not a zero-length string), then this release file takes precedence over the subsystem boot release file (juniSystemSubsystem…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.7
juniSystemModuleBootBackupReleaseFile The backup boot release file name for this slot, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the subsystem boot backup release file (juniSy…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8
juniSystemModuleCpuFiveSecUtilPct Percentage of average CPU utilization for the last five sec for this module. A value of -1 indicates the utilization is unknown.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.9
juniSystemModuleCpuOneMinAvgPct Percentage of average CPU utilization for the last one minute for this module. A value of -1 indicates the utilization is unknown.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.10
juniSystemModuleCpuFiveMinAvgPct Percentage of average CPU utilization for the last five minutes for this module. A value of -1 indicates the utilization is unknown.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.11

A table of system module redundancy information.  Note that modules
that do not support redundancy information will not appear in this
table.

juniSystemModuleRedundancyEntry row .1.3.6.1.4.1.4874.2.2.2.1.3.6.1

A table entry that provides information about a specific system module
in a particular slot location.

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column	Syntax	OID
juniSystemModuleRedundancyGroupId Identifies the redundancy group as derived from hardware settings.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.1
juniSystemModuleRedundancySpare True only if this module is a spare redundant module.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.2
juniSystemModuleRedundancyAssociatedSlot If this module is a primary redundant module, then the module at the same slot level with the slot number identified by this variable is the spare module that serves as this module's backup. If this modul…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.3
juniSystemModuleRedundancyLockout Provides administrative control to enable/disable redundancy protection for the module in this slot.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.4
juniSystemModuleRedundancyRevertControl Per-module control for reverting a primary module back from its active redundant spare module: off - Disable reverting to the primary module. immediate - Revert as soon as this primary module is re…	Enumerationr/w Enumerated Values: 0 off 1 immediate 2 timeAndDate	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.5
juniSystemModuleRedundancyRevertTime The date and time associated with the timeAndDate (delayed) revert operation. Only the local format for DateAndTime is supported. On a set operation, if the time specified is prior to the current time, then an inconsi…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6

Table of system physical I/O ports.  The information in this table
reflects the ports for the expected module type in each slot; in event
of a module mismatch, this table permits navigation of the existing
configuration of the expected module type.

juniSystemPortEntry row .1.3.6.1.4.1.4874.2.2.2.1.4.1.1

A table entry describing a physical port of the system.

Indexes

juniSystemSlotNumber juniSystemSlotLevel juniSystemPortNumber

Column	Syntax	OID
juniSystemPortNumber Port number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot number, slot level and port number. Port numbers are zero-based.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.1
juniSystemPortIfIndex The ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.2
juniSystemPortPhysicalIndex The entPhysicalIndex value assigned to this port. This index may be use to retrieve other information about the port, such as description and type, from the ENTITY-MIB.entPhysicalTable.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.3

Table of system timing selectors.  This table only contains entries for
the primary, secondary and tertiary selecors.

juniSystemTimingSelectorEntry row .1.3.6.1.4.1.4874.2.2.2.1.5.4.1

A table entry describing a system timing selector.

Indexes

juniSystemTimingSelectorIndex

Column	Syntax	OID
juniSystemTimingSelectorIndex The system timing selector index associated with this entry. There are valid indexes for selector types primary(1), secondary(2), tertiary(3).	JuniSystemTimingSelector Type Values: 1 primary 2 secondary 3 tertiary 4 error	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.1
juniSystemTimingSourceType The system timing source type for this entry. This object must be set to timingInterfaceIfIndex(1) when setting the juniSystemTimingSourceIfIndex object or timingLine(3) when setting the juniSystemTimingSourceLine obje…	Enumerationr/w Enumerated Values: 1 timingInterfaceIfIndex 2 timingInternal 3 timingLine	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.2
juniSystemTimingSourceIfIndex The ifIndex of the interface selected as the system timing source. If the juniSystemTimingSourceType object is not timingInterfaceIfIndex(1), then reading this object will return a zero value. The agent will not accep…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.3
juniSystemTimingSourceLine The line type timing source for this entry. If the juniSystemTimingSourceType object is not timingLine(3), then reading this object will return timingSourceLineUndefined(0). The agent will not accept a set to this obj…	Enumerationr/w Enumerated Values: 0 timingSourceLineUndefined 1 timingSourceLineE1PortA 2 timingSourceLineE1PortB 3 timingSourceLineT1PortA 4 timingSourceLineT1PortB	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4
juniSystemTimingWorkingStatus The status associated with the working (normal) source of this system timing working selector.	Enumeration Enumerated Values: 1 timingStatusOk 2 timingStatusError 3 timingStatusUnknown	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.5
juniSystemTimingProtectedStatus The status associated with the protected (backup) source of this system timing selector. If the system doesn't support protected timing sources, then sourceNotProtected(4) will be returned.	Enumeration Enumerated Values: 1 timingStatusOk 2 timingStatusError 3 timingStatusUnknown 4 sourceNotProtected	.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.6

A table of NVS status information.

juniSystemNvsEntry row .1.3.6.1.4.1.4874.2.2.2.1.7.2.1

A table entry that provides the status information for a NVS flash
card.

Indexes

juniSystemNvsIndex

Column	Syntax	OID
juniSystemNvsIndex The index number of the NVS flash card. There is an entry in this table for all values of this index in the range of 1 to the value of juniSystemNvsCount.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.1
juniSystemNvsStatus The status of non-volatile storage (NVS): notPresent - The SRP or the flash card is not accessible. writeProtected - NVS is write-protected. volumeError - Status poll of NVS failed. nearCapacity - U…	Enumeration Enumerated Values: 0 notPresent 1 writeProtected 2 volumeError 3 nearCapacity 4 ok 5 noConfigSpace	.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.2
juniSystemNvsCapacity The capacity of NVS storage in megabytes.	megabytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.3
juniSystemNvsUtilPct The percentage of NVS storage used. A value of -1 indicates NVS utilization is unknown.	percentInteger32 Constraints: range: -1-100	.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.4
juniSystemNvsPhysicalIndex The entPhysicalIndex value assigned to this NVS flash card. This index may be use to retrieve other information about the NVS flash card, such as description and type, from the ENTITY-MIB.entPhysicalTable.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.5

A table of status variables for the system power elements.

juniSystemPowerEntry row .1.3.6.1.4.1.4874.2.2.2.1.8.2.1

A table entry describing status of a system power element.

Indexes

juniSystemPowerIndex

Column	Syntax	OID
juniSystemPowerIndex The index number of the power element. There is an entry in this table for all values of this index in the range of 1 to the value of juniSystemPowerCount.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.1
juniSystemPowerStatus The status of the power element: notPresent - The power element is removed from the chassis. inactive - No power is available from this element. good - Power is available from this element. failed …	Enumeration Enumerated Values: 0 notPresent 1 inactive 2 good 3 failed 4 sensorFailed 5 unknown	.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.2
juniSystemPowerPhysicalIndex The entPhysicalIndex value assigned to this power element. This index may be use to retrieve other information about the power element, such as description and type, from the ENTITY-MIB.entPhysicalTable.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.3

A table of status of the system's fan subsystems.

juniSystemFanEntry row .1.3.6.1.4.1.4874.2.2.2.1.9.2.1

A table entry describing status of a fan subsystem.

Indexes

juniSystemFanIndex

Column	Syntax	OID
juniSystemFanIndex The index number of the fan subsystem. This is a number in the range of 1 to the value of juniSystemFanCount.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.1
juniSystemFanStatus Status of fan subsystem. failed - The fan subsystem has a critical failure, or has been removed, and is now non-operational. ok - All components are operational. warning - The fan subsystem has a…	Enumeration Enumerated Values: 0 failed 1 ok 2 warning	.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.2
juniSystemFanPhysicalIndex The entPhysicalIndex value assigned to this fan subsystem. This index may be use to retrieve other information about the fan subsystem, such as description and type, from the ENTITY-MIB.entPhysicalTable.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.3

A table of status of the system's temperature sensors.

juniSystemTempEntry row .1.3.6.1.4.1.4874.2.2.2.1.9.4.1

A table entry describing status of a temperature sensor. Sensors are
located throughout the system. The ENTITY_MIB.entPhysicalTable provides
detailed information about the location of each sensor. The index for a
tab…

Indexes

juniSystemTempIndex

Column	Syntax	OID
juniSystemTempIndex An arbitrary number to uniquely identify the temperature sensor.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.1
juniSystemTempStatus The status of a temperature sensor: unknown - sensor is not present or is not accessible failed - sensor is broken tooLow - temperature is below nominal range nominal - temperat…	Enumeration Enumerated Values: 0 unknown 1 failed 2 tooLow 3 nominal 4 increasedFanSpeed 5 tooHigh 6 tooLowWarning 7 tooHighWarning	.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.2
juniSystemTempValue The temperature measured by this sensor in degrees Celsius. This measurement is valid only if the value of the corresponding juniSystemTempStatus is tooLow, nominal or tooHigh.	degrees CelsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.3
juniSystemTempPhysicalIndex The entPhysicalIndex value assigned to this temperature sensor. If the temperature sensor is not present this object will return a value of 0. For non-zero values this index may be used to retrieve other information ab…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.4

A table of status of the utilization of system resources.  It is an
implementation option as to which resources (if any) are supported in
this table.  It is also an implementation option as to whether the
threshold objects are supported for a particular instance.

juniSystemUtilizationEntry row .1.3.6.1.4.1.4874.2.2.2.1.10.1.1

A table entry describing the status of the utilization of a system
resource.

Indexes

juniSystemUtilizationResourceType juniSystemUtilizationResourceSubType juniSystemUtilizationLocationType juniSystemUtilizationLocation

Column	Syntax	OID
juniSystemUtilizationResourceType This index identifies a type of enumerated value that is used for the juniSystemUtilizationResourceSubType. See the DESCRIPTION for juniSystemUtilizationResourceSubType for the mapping of Type to SubType enumeration an…	Enumeration Enumerated Values: 1 interface 2 memory	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.1
juniSystemUtilizationResourceSubType This index uses an enumerated value that is different for each value of juniSystemUtilizationResourceType. The following table shows the mapping of Type to SubType enumeration and the corresponding units of measure use…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.2
juniSystemUtilizationLocationType This index element identifies the format of the location information so that the juniSystemUtilizationLocation index element can be properly interpreted.	JuniSystemLocationType Type Values: 1 system 2 slot	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.3
juniSystemUtilizationLocation This index is used to specify the resource instance based on its location. Its value is interpreted based on the location type identified by the juniSystemUtilizationLocationType index element.	JuniSystemLocation Type Constraints: range: 0..16	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.4
juniSystemUtilizationMaxCapacity The maximum number of units of the resource the system can support. See the DESCRIPTION of juniSystemUtilizationResourceSubType for what constitutes a unit of value for this object. Note th…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.5
juniSystemUtilizationCurrentValue The current number of units of the resource in the system. See the DESCRIPTION for juniSystemUtilizationResourceSubType for what constitutes a unit of value for this object. Note that some …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.6
juniSystemUtilizationThresholdRising The threshold value (risingVal), which, in conjunction with juniSystemUtilizationHoldDownTime (holdTime) and juniSystemUtilizationThresholdFalling (fallingVal), is used to decide when to trigger an event indicating that…	SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.7
juniSystemUtilizationThresholdFalling The threshold value (fallingVal), which, in conjunction with juniSystemUtilizationHoldDownTime (holdTime) and juniSystemUtilizationThresholdRising (risingVal), is used to decide when to trigger an event indicating that …	SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.8
juniSystemUtilizationHoldDownTime The hold-down time (holdTime) used in conjunction with juniSystemUtilizationThresholdRising (risingVal) and juniSystemUtilizationThresholdFalling (fallingVal) to decide when to trigger an event indicating that the resou…	secondsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.9

A table of status of the cpu utilization by various tasks.

juniSystemCpuUtilizationEntry row .1.3.6.1.4.1.4874.2.2.2.1.10.2.1

A table entry describing cpu utilization of a particular task.

Indexes

juniSystemCpuUtilizationTimeMark juniSystemCpuUtilizationTaskName

Column	Syntax	OID
juniSystemCpuUtilizationTimeMark A TimeFilter for this task profile entry. Allows GetNext and GetBulk to find task profile rows which have changed since a specified value of sysUptime.	Juniper-TCJuniTimeFilter	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.1
juniSystemCpuUtilizationTaskName Task name associated with this task profile entry.	JuniSystemTaskName Type Constraints: range: 1..100	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.2
juniSystemCpuUtilizationInvoked Number of times task associated with this task profile entry being invoked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.3
juniSystemCpuUtilizationInvokationPerSec Rate of invokation for the task associated with this task profile entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.4
juniSystemCpuUtilizationTotalRunningTime Total running time for the task associated with this task profile entry.	milli SecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.5
juniSystemCpuUtilizationPercentageRunningTime Percentage running time for the task associated with this task profile entry.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.6
juniSystemCpuUtilizationAverageTimePerInvokation Average running time per invokation for the task associated with this task profile entry.	micro SecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.7
juniSystemCpuUtilizationFiveSecondUtilization Utilization in terms of percentage during the five seconds measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.8
juniSystemCpuUtilizationOneMinuteUtilization Utilization in terms of percentage during the one minute measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.9
juniSystemCpuUtilizationFiveMinuteUtilization Utilization in terms of percentage during the five minutes measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.10
juniSystemCpuUtilizationNumberOfInstances Number of instances consolidated for CPU utilization calculation in this task profile entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.11

A Table of criteria for an ISSU initialization.
          
This table will be empty for unsupported platforms. These objects
are supported on the second generation E-series platform
family (E320 & E120) in JUNOSe 9.0 and subsequent system releases.
This object is also supported on ERX-1440 in JUNOSe 9.2 and
subsequent system releases.

juniSystemIssuCriteriaEntry row .1.3.6.1.4.1.4874.2.2.2.1.11.5.1

A table entry describing the criteria for an ISSU initialization.

Indexes

juniSystemIssuCriteriaIndex

Column	Syntax	OID
juniSystemIssuCriteriaIndex The index associated with an entry of the system ISSU Criteria Table.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.1
juniSystemIssuCriteriaDescription To initialize ISSU, few criteria need to be met. If these criteria were not met, ISSU cannot be initialized. This object provides the criteria details.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.2
juniSystemIssuCriteriaStatus To initialize ISSU, few criteria need to be met. If these criteria were not met, ISSU cannot be initialized. This object indicates whether a criteria has met. It will be conditional when that the user can choose to acce…	Enumeration Enumerated Values: 1 yes 2 no 3 conditional	.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.3