Juniper-System-Clock-MIB Table View

Lists all the NTP client's interfaces enabled for NTP.  All the IP
interfaces on the NTP client are by default enabled for NTP
communications and can be disabled individually on each IP interface.
If desired, any IP interface can be blocked from participating in NTP
communication.

juniNtpClientIfEntry row .1.3.6.1.4.1.4874.2.2.56.2.2.5.1

Each entry is per interface config for NTP.

Indexes

juniNtpClientIfRouterIndex juniNtpClientIfIfIndex

Column	Syntax	OID
juniNtpClientIfRouterIndex The index of the router to be enabled or disabled as an NTP client.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.1
juniNtpClientIfIfIndex The ifIndex of the interface on the NTP client.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.2
juniNtpClientIfDisable Enable/disable NTP on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.3
juniNtpClientIfIsBroadcastClient Enable/disable NTP client's interface as broadcast client. As NTP client's broadcast interface, it receives the broadcast NTP messages from the associated servers (peers).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.4
juniNtpClientIfIsBroadcastServer Enable/disable NTP interface as broadcast server. As NTP server's broadcast interface, it broadcast NTP messages on the interfac.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.5
juniNtpClientIfIsBroadcastServerVersion NTP Server Version on the NTP broadcast server interface. Default version is 3	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.6
juniNtpClientIfIsBroadcastServerDelay Poll Interval for broadcasting NTP messages in seconds as a power of two. Default value is 6(64s). Minimal value is 4(16s) and maximum value is 17 (36.4h).	Integer32r/w Constraints: range: 4-17	.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.7

This table provides information on the peers with which the NTP client
has associations. The associated peers(servers) to client will be
running different hosts.

juniNtpPeerCfgEntry row .1.3.6.1.4.1.4874.2.2.56.2.4.1.1

Each entry provides one NTP server's configuration information. Each
peer is uniquely identified by the routerIndex of the client to which it
has to be associated and the Ip address of the remote server(peer)
itself.
…

Indexes

juniNtpClientIfRouterIndex juniNtpPeerCfgIpAddress

Column	Syntax	OID
juniNtpPeerCfgIpAddress Peer's IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.1
juniNtpPeerCfgNtpVersion Displays the peer server NTP software version.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.2
juniNtpPeerCfgPacketSourceIfIndex All the outgoing NTP packets' source address can be configured to one specific interface address on the NTP peer server. This object allows to configure all the outgoing NTP packets' source IP ifIndex to …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.3
juniNtpPeerCfgIsPreferred Select whether this NTP server is a preferred time source to the NTP client to which it has association.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.4
juniNtpPeerCfgRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this ta…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.5

This table provides information on the peers with which the NTP client
has associations.  The associated peers (servers) to client will be
running different hosts.

juniNtpPeerEntry row .1.3.6.1.4.1.4874.2.2.56.2.4.2.1

Each entry provides one NTP server (peer) information. Each peer is
uniquely identified by the routerIndex of the client to which it has to
be associated and the Ip address of the remote server (peer) itself.
…

Indexes

juniNtpClientIfRouterIndex juniNtpPeerCfgIpAddress

Column	Syntax	OID
juniNtpPeerState Displays the peer server association state to NTP client on the system. Bit Peer State Description --- ---------- ------------------------------------------------ 0 master Means NTP cl…	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.1
juniNtpPeerStratumNumber Displays the peer server system clock stratum number.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.2
juniNtpPeerAssociationMode Displays the peer server association mode to the NTP client on the router. broadcastServer - Broadcast only NTP messages. multicastServer - Broadcast only NTP messages for IGMP multicast Ne…	Enumeration Enumerated Values: 0 broacastServer 1 multicastServer 2 unicastServer	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.3
juniNtpPeerBroadcastInterval Displays the broadcast time interval of the NTP time messages from the peer when the peer is enabled either as broadcast server or multicast server.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.4
juniNtpPeerPolledInterval Displays the time interval at which peer will be polled by NTP client with which peer has associations when it is enabled as unicast server.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.5
juniNtpPeerPollingInterval Displays the time interval at which peer will poll the servers with which peer has associations when it is enabled as unicast server.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.6
juniNtpPeerDelay Displays the peer server broadcast delay.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.7
juniNtpPeerDispersion Displays the peer server dispersion.	secondsJuniNtpClockUnsignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.8
juniNtpPeerOffsetError Displays the peer server offset error.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.9
juniNtpPeerReachability Displays the peer reachability status. An 8-bit number that shows whether or not the peer server responded to the last eight requests to the server to which it has association; one indicates a response, zero indicates …	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.10
juniNtpPeerRootDelay Displays the peer server root delay.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.11
juniNtpPeerRootDispersion Displays the peer server root dispersion.	secondsJuniNtpClockUnsignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.12
juniNtpPeerRootSyncDistance Displays the peer server synchronization distance. Measure of the total time error since the update in the path to the stratum 1 server.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.13
juniNtpPeerRootTime Last time at which the stratum 1 server sent clock update reply to the this peer server.	secondsJuniNtpTimeStamp Type Constraints: range: 0..21	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.14
juniNtpPeerRootTimeUpdateServer IP address of the stratum 1 server last updated the peer server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.15
juniNtpPeerReceiveTime If the peer server is either broadcast or multicast server, this will represent time stamp at which NTP client received the broadcast message. If it is unicast server, it represents the time stamp at which the peer has …	JuniNtpTimeStamp Type Constraints: range: 0..21	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.16
juniNtpPeerTransmitTime If the peer server is either broadcast or multicast server, this will represent time stamp at which peer sent the broadcast message. If it is unicast server, it represents the time stamp at which the NTP client has rec…	JuniNtpTimeStamp Type Constraints: range: 0..21	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.17
juniNtpPeerRequestTime For unicast server, it represents the time stamp at which the system client sent NTP request to the peer.	JuniNtpTimeStamp Type Constraints: range: 0..21	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.18
juniNtpPeerPrecision Length of the clock tick (interrupt interval) of the server's clock.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.19
juniNtpPeerLastUpdateTime Displays the seconds since the last update from the NTP server	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.20

The following table contains NTP state variables used by the NTP clock
filter and selection algorithms.  This table depicts a shift register.
Each stage in the shift register is a 3-tuple consisting of the measured
clock offset, measured clock delay and measured clock dispersion
associated with a single observation.
          
The NTP clock-filter and selection algorithms are designed to minimize
the error in the calculated time by using the objects values in the
filter table.

juniNtpPeerFilterRegisterEntry row .1.3.6.1.4.1.4874.2.2.56.2.4.3.1

Each entry corresponds to one stage of the shift register and reading
one set of values clock delay, clock offset and clock dispersion.

Entries are automatically created whenever a peer is configured and
de…

Indexes

juniNtpPeerCfgIpAddress juniNtpPeerFilterIndex

Column	Syntax	OID
juniNtpPeerFilterIndex An integer value in the specified range that is used to index into the table. The size of the table is fixed at 8. Each entry identifies a particular reading of the clock filter variables in the shift register. …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.1
juniNtpPeerFilterOffset The offset of the peer clock relative to the system clock in seconds.	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.2
juniNtpPeerFilterDelay Roundtrip delay of the peer clock relative to the system clock over the network path between them, in seconds. This variable can take on both positive and negative values, depending on clock precision and skew-error ac…	secondsJuniNtpClockSignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.3
juniNtpPeerFilterDispersion The maximum error of the peer clock relative to the system clock over the network path between them, in seconds. Only positive values greater than zero are possible.	secondsJuniNtpClockUnsignedTime Type Constraints: range: 0..11	.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.4