Juniper-PPPoE-CONF
The agent capabilities definitions for the point-to-point protocol over
Ethernet (PPPoE) component of the SNMP agent in JUNOSe family of
products.
- Source file
Juniper-PPPoE-CONF- Last revised
- Identity
juniPppoeAgent- Base OID
1.3.6.1.4.1.4874.5.2.33
Imported Objects
| Juniper-Agents | juniAgents |
| Juniper-PPPOE-MIB | juniPPPoEGroup2 (no object page) juniPPPoEGroup3 (no object page) juniPPPoEGroup4 (no object page) juniPPPoEGroup5 (no object page) juniPPPoEGroup6 (no object page) juniPPPoEGroup7 (no object page) juniPPPoEGroup8 (no object page) juniPPPoEGroup9 (no object page) juniPPPoELockoutTableGroup (no object page) juniPPPoEServiceNameTableGroup (no object page) juniPPPoEServiceNameTableGroup1 (no object page) juniPPPoESubIfGroup2 (no object page) juniPPPoESummaryGroup (no object page) |
| SNMPv2-CONF | AGENT-CAPABILITIES (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) |
Net-SNMP examples using the junose MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-PPPoE-CONF' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-PPPoE-CONF::juniPppoeAgent'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PPPoE-CONF' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PPPoE-CONF::juniPppoeAgent'
Objects (10)
Showing 10 of 10 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4874.5.2.33 |
||
|
juniPppoeAgentV1
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.1 |
|
|
juniPppoeAgentV2
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.2 |
|
|
juniPppoeAgentV3
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.3 |
|
|
juniPppoeAgentV4
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.4 |
|
|
juniPppoeAgentV5
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.5 |
|
|
juniPppoeAgentV6
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.6 |
|
|
juniPppoeAgentV7
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.7 |
|
|
juniPppoeAgentV8
obsolete
|
.1.3.6.1.4.1.4874.5.2.33.8 |
|
.1.3.6.1.4.1.4874.5.2.33.9 |
Dependencies (11) 4 direct · 7 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- Juniper-UNI-SMIjunose
- Juniper-Agentsjunose
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- Juniper-MIBsjunose
- Juniper-TCjunose
- Juniper-PPPOE-MIBjunose
- Juniper-PPPoE-CONFjunoseselected