Juniper-PIM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
102

juniPimInterfaceTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.11 · 1 row entry · 12 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimInterfaceTable' 
The (conceptual) table listing enterprise specific information on a
subset of the rows of the pimInterfaceTable defined in the standard PIM
MIB.
juniPimInterfaceEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.11.1
An entry (conceptual row) in the juniPimInterfaceTable. There is one
entry per entry in the pimInterfaceTable.
Indexes
Column Syntax OID
juniPimIntfNumHelloRcvd
Total number of Hellos received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1
juniPimIntfNumJoinPruneRcvd
Total number of JoinPrunes received by PIM on this interface. It can
only be cleared to 0 when doing set. Setting this also sets counters
for other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2
juniPimIntfNumAssertRcvd
Total number of Asserts received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3
juniPimIntfNumGraftRcvd
Total number of Grafts received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4
juniPimIntfNumGraftAckRcvd
Total number of Graft Acks received by PIM on this interface. It can
only be cleared to 0 when doing set. Setting this also sets counters
for other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5
juniPimIntfNumHelloSent
Total number of Hellos sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6
juniPimIntfNumJoinPruneSent
Total number of JoinPrunes sent by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7
juniPimIntfNumAssertSent
Total number of Asserts sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8
juniPimIntfNumGraftSent
Total number of Grafts sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9
juniPimIntfNumGraftAckSent
Total number of Graft Acks sent by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10
juniPimIntfVersion
The version of PIM running on this interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11
juniPimIntfNumNbrs
Number of PIM neighbors detected on this interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12

juniPimMRouteTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.12 · 1 row entry · 23 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimMRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimMRouteTable' 
The (conceptual) table listing PIM multicast routing information
describing its <*, *, RP>/ <*, G>/ <S, G> states.
juniPimMRouteEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.12.1
An entry (conceptual row) in the juniPimMRouteTable.
Indexes
Column Syntax OID
juniPimMRouteGroup
The group address. Specified as 224.0.0.0 for <*, *, RP> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1
juniPimMRouteSource
The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2
juniPimMRouteSourceMask
The source address mask. Specified as 255.255.255.255 for <S, G>
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3
juniPimMRouteRPAddress
The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G>
and <*, G> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4
juniPimMRouteUpstreamAssertTimer
The time remaining before the router changes its upstream neighbor back
to its RPF neighbor. This timer is called the Assert timer in the PIM
Sparse and Dense mode specification. A value of 0 indicates that no
Assert …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5
juniPimMRouteAssertMetric
The metric advertised by the assert winner on the upstream interface,
or 0 if no such assert is in received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6
juniPimMRouteAssertPref
The preference advertised by the assert winner on the upstream
interface, or 0 if no such assert is in effect.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7
juniPimMRouteAssertRPTBit
The value of the RPT-bit advertised by the assert winner on the
upstream interface, or false if no such assert is in effect.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8
juniPimMRouteBits
This object describes whether the entry is on shared tree (RPT) or
shortest path tree (SPT).
Bits
Enumerated Values:
0rpt
1spt
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9
juniPimMRouteRPAddrInUse
The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries.
Set to 0.0.0.0 for <S, G> entries on shortest path tree.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10
juniPimMRouteUpstreamNbr
The address of upstream neighbor being used for the entry. Its set to
0.0.0.0 if the router is directly attached to source on one of its
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11
juniPimMRouteIifAddr
The address of incoming interface for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12
juniPimMRouteIsWaitingToSwitchToSPT
This object describes whether the entry is still waiting to switch
completely to shortest path tree in case of <S, G> entries. It waits to
do this till it receives first packet from incoming interface towards
shortest …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13
juniPimMRouteEntryExpiryTimer
The time after which the entry timer expires for this entry. Set to 0
if entry timer is not active.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14
juniPimMRouteSenderDRAddr
The address of the designated router on the sender's subnet in case of
<S, G> entries. The sender designated router register encapsulates data
to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15
juniPimMRouteRouteAddr
The address of the route being used to do RPF check for this entry. It
is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255)
if there is no route available.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16
juniPimMRouteRouteMask
The mask of the route being used to do RPF check for this entry. It is
set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there
is no route available.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17
juniPimMRouteGRPAddr
The address of the group-to-RP mapping being used to get the RP for
this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
*, RP>.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18
juniPimMRouteGRPMask
The mask of the group-to-RP mapping being used to get the RP for this
entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
*, RP…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19
juniPimMRouteOtherProtoOifJoinTypeAll
This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving all data. This will be particularly true for dense mode
protocols whic…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20
juniPimMRouteOtherProtoOifJoinTypeG
This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving data for a given group. This will be particularly true for
IGMP which …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21
juniPimMRouteOtherProtoOifJoinTypeSG
This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving data for a given <source, group>. This will be
particularly true for I…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22
juniPimMRoutePimType
This object indicates if the owner of this entry is Sparse mode or
Dense mode PIM. Owner is usually determined by the protocol running on
the incoming interface of the entry. In case sparse-dense mode PIM is
running o…
JuniPimType
Type Values:
0invalid
1dense
2sparse
3sparseAndDense
 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23

juniPimMRouteNextHopTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.13 · 1 row entry · 24 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimMRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimMRouteNextHopTable' 
The (conceptual) table listing PIM multicast routing information
describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces.
juniPimMRouteNextHopEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.13.1
An entry (conceptual row) in the juniPimMRouteNextHopTable.
Indexes
Column Syntax OID
juniPimMRouteNextHopGroupAddr
The group address. Specified as 224.0.0.0 for <*, *, RP> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2
juniPimMRouteNextHopSrcAddr
The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3
juniPimMRouteNextHopSrcMask
The source address mask. Specified as 255.255.255.255 for <S, G>
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4
juniPimMRouteNextHopRPAddr
The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and
<*, G> entries.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5
juniPimMRouteNextHopIfId
The interface index of the outgoing interface (next hop). Specified as
0 for register outgoing interface. Register outgoing interfaces are
created by DR on the source subnet to send PIM register encapsulated
data (as …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6
juniPimMRouteNextHopAddress
This object takes following different values based on the type of next
hop. It should be set to the address of RP in case the next hop
interface is register interface i.e. juniPimMRouteNextHopIfId object is
set to 0. …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7
juniPimMRouteNextHopPruneReason
This object indicates why the downstream interface was pruned, whether
in response to a PIM prune message or due to PIM Assert processing.
Enumeration
Enumerated Values:
1other
2prune
3assert
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8
juniPimMRouteNextHopJoinTypeSSRP
This object indicates whether or not the interface was added as a
result of receiving <*, *, RP> join in case of <*, *, RP> entry OR
inherited as outgoing interface from corresponding <*, *, RP> entry in
case of <*, G> …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9
juniPimMRouteNextHopJoinTypeG
This object indicates whether or not the interface was added as a
result of receiving <*, G> join in case of <*, G> entry OR inherited as
outgoing interface from corresponding <*, G> entry in case of <S, G>
entry.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10
juniPimMRouteNextHopJoinTypeSG
This object indicates whether or not the interface was added as a
result of receiving <S, G> join in case of <S, G> entry.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11
juniPimMRouteNextHopHasLGM
This object indicates whether or not the interface has local group
membership (as indicated by IGMP) in case of <*, G> and <S, G> entries.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12
juniPimMRouteNextHopHasOifAW
This object indicates whether or not this interface is the winner of
assert for corresponding <*, G>/<S, G> entry.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13
juniPimMRouteNextHopHasOifSendAssert
This object indicates whether or not this interface is going to send an
assert at the end of assert suppression interval. Assert suppression is
used to prevent a flood of assert to be generated in response to data or
o…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14
juniPimMRouteNextHopHasOifRegister
This object indicates whether or not this next hop is a register
outgoing interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15
juniPimMRouteNextHopHasOifBorderBit
This object is used to describe a register outgoing interface. It
indicates whether or not the border bit is set in the register packet
when the packet is sent over the register interface. For all other
(non-register)…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16
juniPimMRouteNextHopHasOifNullEncapsBit
This object is used to describe a register outgoing interface. It
indicates whether or not the NULL encapsulation bit is set
(periodically) in the register packet when the packet is sent over the
register interface. F…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17
juniPimMRouteNextHopJoinEndTimer
This object indicates the time (in seconds) left when the join timer
expires for the outgoing interface. Join timer for an outgoing
interface of <S, G> entry indicates when the <S, G> join expires, for a
<*, G> entry i…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18
juniPimMRouteNextHopAssertEndTimer
This object indicates the time (in seconds) left when the assert timer
expires on this outgoing inteface.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19
juniPimMRouteNextHopNextAssertTimer
This object indicates the duration (in seconds) left for which sending
an assert has been suppressed on this outgoing interface.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20
juniPimMRouteNextHopAssertSrcAddress
This object indicates the source address which will be used in the
assert packet to send an assert out for the entry on this outgoing
interface. For <S, G> entries it is the address of the source S itself.
For <*, G> e…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21
juniPimMRouteNextHopRegisterSuppressionTimer
This object is used for register outgoing interfaces. It indicates the
duration (in seconds) left for which sending a register packet has been
suppressed on the register outgoing interface as a result of receiving
regi…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22
juniPimMRouteNextHopPimType
This object indicates whether the outgoing interface was contributed by
sparse-mode or dense-mode PIM.
JuniPimType
Type Values:
0invalid
1dense
2sparse
3sparseAndDense
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23
juniPimMRouteNextHopPruneTimeLeft
This object indicates the time (in seconds) left when the prune timer
expires on an outgoing inteface. Its used for pruned outgoing
interfaces contributed by dense-mode PIM.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24
juniPimMRouteNextHopsendingIpAddress
This object describes the source IP address used by this interface to
send PIM packets out on this outgoing interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25

juniPimRPSetTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.14 · 1 row entry · 3 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimRPSetTable' 
The (conceptual) table listing enterprise specific information on a
subset of the rows of the pimRPSetTable defined in the standard PIM
MIB.
juniPimRPSetEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.14.1
An entry (conceptual row) in the juniPimRPSetTable.
Indexes
Column Syntax OID
juniPimRPSetPriority
This object describes the priority of the RP for this group-to-RP
mapping.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1
juniPimRPSetTypeInfo
This object describes the mechanism by which this group to RP mapping
has been learnt, i.e. whether its statically configured, AutoRP learnt
or BSR learnt. It also indicates whether the mapping is positive or
negative.…
Enumeration
Enumerated Values:
0pimRPTypeInvalid
1pimRPTypeStatic
2pimRPTypeStaticOverride
3pimRPTypeAutoRP
4pimRPTypeBSR
5pimRPTypeStaticNegative
6pimRPTypeStaticOverrideNegative
7pimRPTypeAutoRPNegative
8pimRPTypeBSRNegative
 .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2
juniPimRPSetAccessListName
This object lists the name of the access list from which this
group-to-RP mapping was picked up in case of statically configured
RPs.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3

juniPimStaticRPConfTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.15 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimStaticRPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimStaticRPConfTable' 
The (conceptual) table listing statically configured PIM RPs.
juniPimStaticRPConfEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.15.1
An entry (conceptual row) in the juniPimStaticRPConfTable.
Indexes
Column Syntax OID
juniPimStaticRPConfComponentIndex
A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1
juniPimStaticRPConfRPAddr
Ip address of the RP which for the group-to-RP mapping being
configured.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2
juniPimStaticRPConfAccessListName
Name of the access list from which group-ranges are picked up for this
group-ro-RP mapping. Every deny component in the list is added as
negative group-ro-RP mapping.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3
juniPimStaticRPConfRowStatus
The status of this row, by which new entries may be created, or old
entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4
juniPimStaticRPConfOverride
The object indicates whether or not this statically configured
group-to-RP mapping should override the group-to-RP mapping learnt via
AutoRP for the component group-ranges in the access list. By default
AutoRP learnt g…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5

juniPimAutoRPConfTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.16 · 1 row entry · 7 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimAutoRPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimAutoRPConfTable' 
The (conceptual) table allowing AutoRP configuration of candidate RPs
(advertisement agents).
juniPimAutoRPConfEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.16.1
An entry (conceptual row) in the juniPimAutoRPConfTable.
Indexes
Column Syntax OID
juniPimAutoRPConfComponentIndex
A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1
juniPimAutoRPConfCandRPAddr
The IP address of the candidate RP for this advertising agent
configuration.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2
juniPimAutoRPConfGroupAccessListName
The access list name from which group ranges are picked up for
advertising agent configuration.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3
juniPimAutoRPConfRowStatus
The status of this row, by which new entries may be created, or old
entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4
juniPimAutoRPConfTTL
The time-to-live value used while sending AutoRP advertisement out for
this group-to-RP mappings created as a result of this configuration.
This should be set along with juniPimAutoRPConfRowStatus while creating
an Auto…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5
juniPimAutoRPConfAncmntIntvl
The time interval at which AutoRP advertisements are sent out for the
group-to-RP mappings created as a result of this configuration. This
should be set along with juniPimAutoRPConfRowStatus while creating an
AutoRP ad…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6
juniPimAutoRPConfifId
The interface index of the interface for the candidate RP if an
interface with that address exists else it is set to 0.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7

juniPimAutoRPCandTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.17 · 1 row entry · 9 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimAutoRPCandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimAutoRPCandTable' 
The (conceptual) table listing AutoRP candidate RPS (advertising
agents).
juniPimAutoRPCandEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.17.1
An entry (conceptual row) in the juniPimAutoRPCandTable.
Indexes
Column Syntax OID
juniPimAutoRPCandComponentIndex
A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1
juniPimAutoRPCandRPAddr
The IP address of the candidate RP for this group-to-RP mapping.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2
juniPimAutoRPCandGroupAddr
The group address of the candidate RP for this group-to-RP mapping.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3
juniPimAutoRPCandGroupMask
The group mask of the candidate RP for this group-to-RP mapping.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4
juniPimAutoRPCandRowStatus
The current status of this row.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5
juniPimAutoRPCandAccessListName
The name of the group list using which this AutoRP group-to-RP
candidate RP mapping was configured.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6
juniPimAutoRPCandAutoRPTTL
The time-to-live value used while sending AutoRP advertisement out for
this group-to-RP mapping.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7
juniPimAutoRPCandAutoRPAncmntIntvl
The time interval at which AutoRP advertisements are sent out for this
group-to-RP mapping.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8
juniPimAutoRPCandIfId
The interface index of the interface for this AutoRP group-to-RP
candidate RP mapping if an interface for RP address exists else it is
set to 0.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9

juniPimComponentTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.18 · 1 row entry · 8 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimComponentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimComponentTable' 
The (conceptual) table listing each component (domain) in PIM.
juniPimComponentEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.18.1
An entry (conceptual row) in the juniPimComponentTable.
Indexes
Column Syntax OID
juniPimComponentIndex
A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1
juniPimComponentAutoRPMappingAgentRowStatus
The status of AutoRP mapping agent by which this router can be made an
AutoRP mapping agent or removed from being an AutoRP mapping agent in
this component.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2
juniPimComponentConfiguredAutoRPMappingAgentIfId
The interface index of the interface which mapping agent should use to
send AutoRP mapping messages. If not specified, the interface with
highest IP address in this domain is picked up for this purpose.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3
juniPimComponentAutoRPMappingAgentInterval
The time interval at which AutoRP mapping messages are sent out in this
component. The default value is 60 seconds.
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4
juniPimComponentAutoRPMappingTTL
The time-to-live value used while sending AutoRP mapping messages out
in this component.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5
juniPimComponentAutoRPMappingAgentIntfAddr
The IP address of the interface which mapping agent is using to send
AutoRP mapping messages.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6
juniPimComponentAutoRPMappingAgentWinnerAddr
The IP address of the winner AutoRP mapping agent. There can be
multiple mapping agents configured in a given PIM domain(component).
The mapping agent with highest IP address is chosen as the winner and it
continues to…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7
juniPimComponentAutoRPMappingAgentWinnerLastHeard
The time (in seconds) that has past since an AutoRP mapping message was
receieved from the winner AutoRP mapping agent. If the router itself is
the winner, then this is set to 0.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8

juniPimUnicastRouteTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.19 · 1 row entry · 8 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimUnicastRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimUnicastRouteTable' 
The (conceptual) table listing all the unicast routes currently in use
by PIM for diong RPF checking.
juniPimUnicastRouteEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.19.1
An entry (conceptual row) in the juniPimUnicastRouteTable.
Indexes
Column Syntax OID
juniPimUnicastRouteEntryAddr
The address of route in use.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1
juniPimUnicastRouteEntryMask
The mask of route in use.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2
juniPimUnicastRouteEntryRpfNbr
The RPF neighbor (next-hop) to reach the route of this entry. It is
set to 0.0.0.0 for directly connected routes.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3
juniPimUnicastRouteEntryIifId
The interface index (next-hop) to reach the route of this entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4
juniPimUnicastRouteEntryIifAddr
The interface address (next-hop) to reach the route of this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5
juniPimUnicastRouteEntryPref
The preference of the route of this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6
juniPimUnicastRouteEntryMetric
The metric of the route of this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7
juniPimUnicastRouteEntryPimType
This object indicates whether the route specified in this entry is
being used by sparse-mode and/or dense-mode PIM.
JuniPimType
Type Values:
0invalid
1dense
2sparse
3sparseAndDense
 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8

juniPimSPTThresholdTable

table
.1.3.6.1.4.1.4874.2.2.43.1.1.20 · 1 row entry · 3 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPimSPTThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PIM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PIM-MIB::juniPimSPTThresholdTable' 
The (conceptual) table listing threshold values set for switching from
shared tree to shortest path tree and vice versa for data forwarded by
PIM sparse-mode.
juniPimSPTThresholdEntry row .1.3.6.1.4.1.4874.2.2.43.1.1.20.1
An entry (conceptual row) in the juniPimSPTThresholdTable.
Indexes
Column Syntax OID
juniPimSPTThresholdAccessListName
The name of the access list from which group ranges are picked up for
setting SPT threshold in this entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1
juniPimSPTThresholdRowStatus
The status of this row, by which new entries may be created, or old
entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2
juniPimSPTThresholdKbps
The value of SPT threshold in kilobits per second. Default value is
0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3