Juniper-MROUTER-MIB Table View

The table listing the static IP routes for the mcast RPF check.

juniMcastRpfRouteEntry row .1.3.6.1.4.1.4874.2.2.65.1.2.1.1

An entry representing the static IP route for the mcast RPF check.

Indexes

juniMcastRouteStaticDest juniMcastRouteStaticMask

Column	Syntax	OID
juniMcastRouteStaticDest The static group's destination IpAddress.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.1
juniMcastRouteStaticMask The static group's destination IpAddress Mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.2
juniMcastRouteStaticRtPreference The administrative distance metric.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.3
juniMcastRouteStaticRpfHop The next hop IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.4
juniMcastRouteStaticTag The tag value to be associated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.5
juniMcastRouteStaticRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.65.1.2.1.1.6

The table containing the extended information of IP Multicast Route Entry

juniMRouteEntry row .1.3.6.1.4.1.4874.2.2.65.1.2.2.1

An entry representing the additional information of IP Multicast Route Entry

Indexes

No indexes recorded

Column	Syntax	OID
juniMRouteAdmBwAdaptive Indicates that bandwidth is measured.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.1
juniMRouteAdmBw Multicast Admission Control bandwidth in bps.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.2
juniMRouteQosBwAdaptive Indicates that qos bandwidth is measured.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.3
juniMRouteQosBw QoS Adjustment bandwidth in bps.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.4
juniMRouteIsEcmp Indicates RPF route is an ECMP route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.5
juniMRouteRpfDisabled Indicates that RPF check is disabled for this entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.6
juniMRouteOwnerProtoType Indicates the multicast protocol type.	IANA-RTPROTO-MIBIANAipMRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 dvmrp 5 mospf 6 pimSparseDense 7 cbt 8 pimSparseMode 9 pimDenseMode 10 igmpOnly 11 bgmp 12 msdp	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.7
juniMRoutePktFwd Packets received that made it out on any egress.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.8
juniMRouteOifCnt Indicates the OIF count.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.2.1.9

The (conceptual) table containing multicast routing
information specific to interfaces.

juniMRouteInterfaceEntry row .1.3.6.1.4.1.4874.2.2.65.1.2.4.1

An entry (conceptual row) containing the multicast routing
information for a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniMRouteInterfaceActiveGroups This indicates the total number of groups currently forwarded on the interface.	Integer32 Constraints: range: 0-1024	.1.3.6.1.4.1.4874.2.2.65.1.2.4.1.1
juniMRouteInterfaceBlockedGroups This indicates the total number of groups currently blocked on the interface.	Integer32 Constraints: range: 0-1024	.1.3.6.1.4.1.4874.2.2.65.1.2.4.1.2

The (conceptual) table containing multicast routing
information specific to the number of mroutes (across all VRs) ,
that have OIFs, on a port.

juniMRoutePortEntry row .1.3.6.1.4.1.4874.2.2.65.1.2.6.1

An entry (conceptual row) containing the multicast routing
information specific to the number of mroutes (across all VRs) ,
that have OIFs, on a port.

Indexes

juniMRoutePortLocationIndex

Column	Syntax	OID
juniMRoutePortLocationIndex The value of a platform specific port location.	Juniper-TCJuniInterfaceLocationValue Type Constraints: range: 1..16	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.1
juniMRoutePortMaxBw Maximum port admission-bandwidth-limit to be configured on the port.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.2
juniMRoutePortPriorityBw Maximum port priority-bandwidth-limit to be configured on the port.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.3
juniMRoutePortHysteresis Hysteresis to be configured on the port. Applies to juniMRoutePortMaxBw and juniMRoutePortPriorityBw.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.4
juniMRoutePortAdmittedBw Admitted Bandwidht on the port.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.5
juniMRoutePortSGCount Number of mroutes on this port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.6
juniMRoutePortLimit Limit on the number of mroutes, with the OIFs on the port, to be configured on the port .	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.65.1.2.6.1.7