Juniper-LOG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
20

juniLogSyslogTable

table
.1.3.6.1.4.1.4874.2.2.28.1.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniLogSyslogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-LOG-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-LOG-MIB::juniLogSyslogTable' 
A table describing the characteristics of each syslog destination.
juniLogSyslogEntry row .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1
An entry describingthe characteristics of a syslog destination.
Indexes
Column Syntax OID
juniLogSyslogIpAddress
The IP address of this syslog destination. This value must be a
unicast IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1
juniLogSyslogRowStatus
Controls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2
juniLogSyslogSeverity
The severity level for this syslog destination. Setting this value to
'off' suppresses log messages from being sent to this syslog
destination.
Juniper-TCJuniLogSeverityr/w
Type Values:
-1off
0emergency
1alert
2critical
3error
4warning
5notice
6info
7debug
 .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3
juniLogSyslogFacility
The facility id attached to messages sent to this syslog destination.
JuniLogSyslogFacilityr/w
Type Values:
0local0
1local1
2local2
3local3
4local4
5local5
6local6
7local7
 .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4

juniLogCatTable

table
.1.3.6.1.4.1.4874.2.2.28.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniLogCatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-LOG-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-LOG-MIB::juniLogCatTable' 
A table describing the characteristics of each log category.
juniLogCatEntry row .1.3.6.1.4.1.4874.2.2.28.1.2.2.1
An entry describing the characteristics of a log category.
Indexes
Column Syntax OID
juniLogCatIndex
An integer index uniquely associated with a log.

Index values do not necessarily persist across system reboots.
Following reboot, mappings of (reboot-invariant) log category names to
log index values is a…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1
juniLogCatName
The name of this log category.
JuniLogCatName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2
juniLogCatDescr
A description of the functionality for which events are recorded by
this log category.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3
juniLogCatEngineering
An indication of whether this log is intended mainly for engineering
development and debug purposes.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4
juniLogCatDiscards
The number of messages generated by this log category that were
discarded because of resource limitations.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5
juniLogCatSeverity
The severity level for this log category.

The value 'off' disables recording of this log category's messages. For
other severity level values, only messages at or above this severity
level will be logge…
Juniper-TCJuniLogSeverityr/w
Type Values:
-1off
0emergency
1alert
2critical
3error
4warning
5notice
6info
7debug
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6
juniLogCatVerbosity
The verbosity level for this log category.

Supplementary information may be available for certain event types.
This object controls whether that additional information, if available
for a given event, is …
JuniLogVerbosityr/w
Type Values:
0low
1medium
2high
 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7

juniLogCatNameTable

table
.1.3.6.1.4.1.4874.2.2.28.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniLogCatNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-LOG-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-LOG-MIB::juniLogCatNameTable' 
A table mapping each log category's name to its index.
juniLogCatNameEntry row .1.3.6.1.4.1.4874.2.2.28.1.2.3.1
An entry mapping a log category's name to its index.
Indexes
Column Syntax OID
juniLogCatNameName
The name of the log category.
JuniLogCatName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1
juniLogCatNameIndex
The log index associated with this log category.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2

juniLogMsgTable

table
.1.3.6.1.4.1.4874.2.2.28.1.3.2 · 1 row entry · 7 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniLogMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-LOG-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-LOG-MIB::juniLogMsgTable' 
A table of log messages generated by this device.
juniLogMsgEntry row .1.3.6.1.4.1.4874.2.2.28.1.3.2.1
A log message generated by this device.
Indexes
Column Syntax OID
juniLogMsgSysUpTimeStamp
The value of sysUpTime when this log message was recorded.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1
juniLogMsgSequenceNumber
A sequence number that uniquely identifies this entry. Sequence
numbers are assigned consecutively beginning with 1. More recent
entries have higher sequence numbers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2
juniLogMsgCatName
Name of the log category that contributed this message.
JuniLogCatName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3
juniLogMsgCatIndex
Index of the log category that contributed this message.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4
juniLogMsgSeverity
The severity of the message.
Juniper-TCJuniLogSeverity
Type Values:
-1off
0emergency
1alert
2critical
3error
4warning
5notice
6info
7debug
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5
juniLogMsgText
The text of the log message.

Truncation of log message text is indicated by n asterisk character
('*') in the last octet of a maximum-size string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6
juniLogMsgDateAndTimeStamp
The date and time this message was generated.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7