Juniper-L2TP-MIB Table View

The L2TP destination configuration table.  Each entry in this table has
a corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpDestStatsTable.

juniL2tpDestConfigEntry row .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1

Describes the configuration attributes of an L2TP destination.

Indexes

juniL2tpDestConfigIfIndex

Column	Syntax	OID
juniL2tpDestConfigIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.1
juniL2tpDestConfigRowStatus An implementation may choose not to support administrative configuration of tunnels.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.2
juniL2tpDestConfigAdminState The configured administrative state.	JuniL2tpAdminStater/w Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.3
juniL2tpDestConfigLockoutAction The lockout action to be applied to a destination.	JuniL2tpLockoutActionr/w Type Values: 0 none 1 test 2 unlock	.1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.4

The L2TP destination status table.  Each entry in this table has a
corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpDestConfigTable.

juniL2tpDestStatusEntry row .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1

Describes the status attributes of an L2TP destination.

Indexes

juniL2tpDestStatusIfIndex

Column	Syntax	OID
juniL2tpDestStatusIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.1
juniL2tpDestStatusTransport The underlying transport over which this L2TP destination is carried.	JuniL2tpTransport Type Values: 0 other 1 udpIp	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.2
juniL2tpDestStatusEffectiveAdminState The administrative state currently in effect. This could be the configured admin state for this destination, or an overriding admin state exerted from a higher hierarchical level (system).	JuniL2tpAdminState Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.3
juniL2tpDestStatusTotalTunnels Number of tunnel creations attempted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.4
juniL2tpDestStatusFailedTunnels Number of tunnel creation attempts that failed to reach the established state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.5
juniL2tpDestStatusFailedTunnelAuthens Number of tunnel creation attempts that failed authentication.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.6
juniL2tpDestStatusActiveTunnels Number of tunnels currently established.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.7
juniL2tpDestStatusTotalSessions Number of session creations attempted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.8
juniL2tpDestStatusFailedSessions Number of session creation attempts that failed to reach the established state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.9
juniL2tpDestStatusActiveSessions Number of sessions currently established.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.10
juniL2tpDestStatusLockoutState Lockout state of destination.	JuniL2tpLockoutState Type Values: 0 notLocked 1 waitLockTimeout 2 waitTestStart 3 testing	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.11
juniL2tpDestStatusLockoutTimeRemaining Lockout timeout remaining.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.12

The L2TP destination statistics table.  Describes the aggregate control
and payload statistics for all L2TP tunnels configured on each
destination.  Each entry in this table has a corresponding entry in the
Interfaces MIB ifTable, and in juniL2tpDestConfigTable.

juniL2tpDestStatEntry row .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1

Describes the aggregate L2TP control and payload statistics for all
L2TP tunnels on an L2TP destination.

Indexes

juniL2tpDestStatIfIndex

Column	Syntax	OID
juniL2tpDestStatIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.1
juniL2tpDestStatCtlRecvOctets Number of control octets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.2
juniL2tpDestStatCtlRecvPackets Number of control packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.3
juniL2tpDestStatCtlRecvErrors Number of control packets incurring reception errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.4
juniL2tpDestStatCtlRecvDiscards Number of control packets discarded after reception.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.5
juniL2tpDestStatCtlSendOctets Number of control octets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.6
juniL2tpDestStatCtlSendPackets Number of control packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.7
juniL2tpDestStatCtlSendErrors Number of control packets incurring transmission errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.8
juniL2tpDestStatCtlSendDiscards Number of control packets discarded before transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.9
juniL2tpDestStatPayRecvOctets Number of payload octets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.10
juniL2tpDestStatPayRecvPackets Number of payload packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.11
juniL2tpDestStatPayRecvErrors Number of payload packets incurring reception errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.12
juniL2tpDestStatPayRecvDiscards Number of payload packets discarded after reception.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.13
juniL2tpDestStatPaySendOctets Number of payload octets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.14
juniL2tpDestStatPaySendPackets Number of payload packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.15
juniL2tpDestStatPaySendErrors Number of payload packets incurring transmission errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.16
juniL2tpDestStatPaySendDiscards Number of payload packets discarded before transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.17

The L2TP tunnel configuration table.  Each entry in this table has a
corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpTunnelStatsTable.

juniL2tpTunnelConfigEntry row .1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1

Describes the configuration attributes of an L2TP tunnel.

Indexes

juniL2tpTunnelConfigIfIndex

Column	Syntax	OID
juniL2tpTunnelConfigIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.1
juniL2tpTunnelConfigRowStatus An implementation may choose not to support administrative configuration of tunnels.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.2
juniL2tpTunnelConfigAdminState The configured administrative state.	JuniL2tpAdminStater/w Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.3

The L2TP tunnel status and statistics table.  Each entry in this table
has a corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpTunnelConfigTable.

juniL2tpTunnelStatusEntry row .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1

An L2TP tunnel interface stats entry.

Indexes

juniL2tpTunnelStatusIfIndex

Column	Syntax	OID
juniL2tpTunnelStatusIfIndex Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1
juniL2tpTunnelStatusTransport The underlying transport over which this L2TP tunnel is carried.	JuniL2tpTransport Type Values: 0 other 1 udpIp	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2
juniL2tpTunnelStatusLocalTunnelId The local tunnel identifier.	JuniL2tpTunnelId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3
juniL2tpTunnelStatusRemoteTunnelId The remote tunnel identifier.	JuniL2tpTunnelId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4
juniL2tpTunnelStatusEffectiveAdminState The administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hierarchical level (system, destination).	JuniL2tpAdminState Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5
juniL2tpTunnelStatusState The current state of the tunnel.	Enumeration Enumerated Values: 0 idle 1 connecting 2 established 3 disconnecting	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6
juniL2tpTunnelStatusInitiated Indicates whether the tunnel was initiated locally, or by the remote tunnel peer.	Enumeration Enumerated Values: 0 none 1 local 2 remote	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7
juniL2tpTunnelStatusRemoteHostName The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero-length …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8
juniL2tpTunnelStatusRemoteVendorName Identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected, of a zero-length string if no name was previously known.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9
juniL2tpTunnelStatusRemoteFirmwareRevision The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value if no revision was previously known.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10
juniL2tpTunnelStatusRemoteProtocolVersion The protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol revision.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11
juniL2tpTunnelStatusRemoteBearerCapabilities The Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.	Enumeration Enumerated Values: 0 none 1 digital 2 analog 3 digitalAnalog	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12
juniL2tpTunnelStatusRemoteFramingCapabilities The Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.	Enumeration Enumerated Values: 0 none 1 sync 2 async 3 syncAsync	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13
juniL2tpTunnelStatusRecvWindowSize The receive window size.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14
juniL2tpTunnelStatusSendWindowSize The tunnel peer's receive window size.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15
juniL2tpTunnelStatusSendQueueDepth Number of control packets on transmit queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16
juniL2tpTunnelStatusRecvSeq The next sequence number expected in a received control packet.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17
juniL2tpTunnelStatusRecvSeqAck The last received sequence number that was acknowledged back to the tunnel peer.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18
juniL2tpTunnelStatusSendSeq The next sequence number to be sent in a transmitted control packet.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19
juniL2tpTunnelStatusSendSeqAck The send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the juniL2tpTunnelStatusSendSeq from juniL2tpTunnelStatusSendSeqAck and comparing this value to jun…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20
juniL2tpTunnelStatusTotalSessions The total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have since terminated.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21
juniL2tpTunnelStatusFailedSessions The number of sessions that were initiated but failed to reach the established phase.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22
juniL2tpTunnelStatusActiveSessions The current number of sessions in the established state.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23
juniL2tpTunnelStatusLastResultCode The last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24
juniL2tpTunnelStatusLastErrorCode The last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25
juniL2tpTunnelStatusLastErrorMessage The last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26
juniL2tpTunnelStatusCumEstabTime The cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27
juniL2tpTunnelStatusEffectiveFailoverResync The mechanism employed following failover to resynchronize with the L2TP peer.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.28

The L2TP tunnel statistics table.  Describes the control and payload
statistics for each L2TP tunnel.  Each entry in this table has a
corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpTunnelConfigTable.

juniL2tpTunnelStatEntry row .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1

Describes the L2TP control and payload statistics for an L2TP tunnel.

Indexes

juniL2tpTunnelStatIfIndex

Column	Syntax	OID
juniL2tpTunnelStatIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.1
juniL2tpTunnelStatCtlRecvOctets Number of control octets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.2
juniL2tpTunnelStatCtlRecvPackets Number of control packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.3
juniL2tpTunnelStatCtlRecvErrors Number of control packets incurring reception errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.4
juniL2tpTunnelStatCtlRecvDiscards Number of control packets discarded after reception.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.5
juniL2tpTunnelStatCtlSendOctets Number of control octets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.6
juniL2tpTunnelStatCtlSendPackets Number of control packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.7
juniL2tpTunnelStatCtlSendErrors Number of control packets incurring transmission errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.8
juniL2tpTunnelStatCtlSendDiscards Number of control packets discarded before transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.9
juniL2tpTunnelStatPayRecvOctets Number of payload octets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.10
juniL2tpTunnelStatPayRecvPackets Number of payload packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.11
juniL2tpTunnelStatPayRecvErrors Number of payload packets incurring reception errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.12
juniL2tpTunnelStatPayRecvDiscards Number of payload packets discarded after reception.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.13
juniL2tpTunnelStatPaySendOctets Number of payload octets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.14
juniL2tpTunnelStatPaySendPackets Number of payload packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.15
juniL2tpTunnelStatPaySendErrors Number of payload packets incurring transmission errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.16
juniL2tpTunnelStatPaySendDiscards Number of payload packets discarded before transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.17
juniL2tpTunnelStatCtlRecvZLB Number of Zero Length Body control packet acknowledgement packets that were received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.18
juniL2tpTunnelStatCtlRecvOutOfSequence Number of control packets not received in the correct sequence number order.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.19
juniL2tpTunnelStatCtlRecvOutOfWindow Number of control packets received outside the offered receive window.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.20
juniL2tpTunnelStatCtlSendZLB Number of Zero Length Body control packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.21
juniL2tpTunnelStatCtlSendRetransmits Number of control packet send retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.22

Table of TunnelIf/SessionId -> SessionIf mappings.

juniL2tpMapTifSidToSifEntry row .1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1

A mapping of TunnelIf/SessionId to SessionIf.

Indexes

juniL2tpMapTifSidToSifTunnelIfIndex juniL2tpMapTifSidToSifLocalSessionId

Column	Syntax	OID
juniL2tpMapTifSidToSifTunnelIfIndex The ifIndex of a tunnel interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.1
juniL2tpMapTifSidToSifLocalSessionId A local session ID on the associated tunnel interface.	JuniL2tpSessionId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.2
juniL2tpMapTifSidToSifSessionIfIndex The ifIndex of the session interface identified by this entry's Tunnel ifIndex and local Session ID pair.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.3

Map L2TP tunnel IDs to tunnel interfaces.

juniL2tpMapTidToTifEntry row .1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1

A mapping of L2TP tunnel ID to tunnel interface.

Indexes

juniL2tpMapTidToTifLocalTunnelId

Column	Syntax	OID
juniL2tpMapTidToTifLocalTunnelId A local tunnel identifier.	JuniL2tpTunnelId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.1
juniL2tpMapTidToTifIfIndex The ifIndex of the tunnel interface having the associated tunnel identifier.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.2

The L2TP session configuration table.  Each entry in this table has a
corresponding entry in the Interfaces MIB ifTable, and in
juniL2tpSessionStatsTable.

juniL2tpSessionConfigEntry row .1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1

Describes the configuration attributes of an L2TP session.

Indexes

juniL2tpSessionConfigIfIndex

Column	Syntax	OID
juniL2tpSessionConfigIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.1
juniL2tpSessionConfigRowStatus An implementation may choose not to support administrative configuration of tunnels.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.2
juniL2tpSessionConfigAdminState The configured administrative state.	JuniL2tpAdminStater/w Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.3

The L2TP session status and statistics table.

juniL2tpSessionStatusEntry row .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1

An L2TP session interface status and statistics entry.

Indexes

juniL2tpSessionStatusIfIndex

Column	Syntax	OID
juniL2tpSessionStatusIfIndex The ifIndex of an L2TP session interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.1
juniL2tpSessionStatusLacPppIfIndexdeprecated For pass-through PPP sessions (conventional LAC), the ifIndex of an associated local PPP interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. For…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.2
juniL2tpSessionStatusLocalSessionId The local session ID for the session.	JuniL2tpSessionId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.3
juniL2tpSessionStatusRemoteSessionId The remote session ID for the session.	JuniL2tpSessionId Type Constraints: range: 0..65535	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.4
juniL2tpSessionStatusUserName The peer session name on this interface, typically the login name of the remote user. If the user name is unknown this object will contain a zero-length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.5
juniL2tpSessionStatusEffectiveAdminState The administrative state currently in effect. This could be the configured admin state for this session, or an overriding admin state exerted from a higher hierarchical level (system, destination, tunnel).	JuniL2tpAdminState Type Values: 0 enabled 1 disabled 2 drain	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.6
juniL2tpSessionStatusState The current state of the session.	Enumeration Enumerated Values: 0 idle 1 connecting 2 established 3 disconnecting	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.7
juniL2tpSessionStatusCallType The type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). N…	Enumeration Enumerated Values: 0 none 1 lacIncoming 2 lnsIncoming 3 lacOutgoing 4 lnsOutgoing	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.8
juniL2tpSessionStatusCallSerialNumber The serial number assigned to this session.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.9
juniL2tpSessionStatusTxConnectSpeed The last known transmit baud rate for this session.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.10
juniL2tpSessionStatusRxConnectSpeed The last known receive baud rate for this session.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.11
juniL2tpSessionStatusCallBearerType The bearer type of this session.	Enumeration Enumerated Values: 0 none 1 digital 2 analog	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.12
juniL2tpSessionStatusFramingType The framing type of this session.	Enumeration Enumerated Values: 0 none 1 sync 2 async	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.13
juniL2tpSessionStatusPhysChanId The physical channel identifier for the session. For pass-through PPP sessions, typically the ifIndex of the access interface lying below the PPP interface identified by juniL2tpSessionStatusLacTunneledIf…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.14
juniL2tpSessionStatusDnis The Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided, a zero-length string will be returned.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.15
juniL2tpSessionStatusClid The Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided, a zero-length string will be returned.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.16
juniL2tpSessionStatusSubAddress The SubAddress that the LAC obtained from the network for the session. If no SubAddress was provided, a zero-length string will be returned.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.17
juniL2tpSessionStatusPrivateGroupId The Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided, a zero-length string will be returned.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.18
juniL2tpSessionStatusProxyLcp Indicates whether proxy LCP was provided for this session.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.19
juniL2tpSessionStatusAuthMethod The proxy authentication method employed by the LAC for the session. If juniL2tpSessionProxyLcp is false(2) this object reports a value of 'none' and should be ignored.	Enumeration Enumerated Values: 0 none 1 pppChap 2 pppPap 3 pppMsChap	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.20
juniL2tpSessionStatusSequencingState Indicates which tunnel peers have requested payload sequencing.	Enumeration Enumerated Values: 0 none 1 remote 2 local 3 both	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.21
juniL2tpSessionStatusSendSeq The next send sequence number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.22
juniL2tpSessionStatusRecvSeq The next receive sequence number expected.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.23
juniL2tpSessionStatusLacTunneledIfIndex For pass-through remote client sessions (conventional LAC), the ifIndex of an associated local interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. …	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.24
juniL2tpSessionStatusCumEstabTime The cumulative time in seconds that this session, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.25

The L2TP session statistics table.

juniL2tpSessionStatEntry row .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1

An L2TP session interface statistics entry.

Indexes

juniL2tpSessionStatIfIndex

Column	Syntax	OID
juniL2tpSessionStatIfIndex The ifIndex of an L2TP session interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.1
juniL2tpSessionStatPayRecvOctets Number of payload octets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.2
juniL2tpSessionStatPayRecvPackets Number of payload packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.3
juniL2tpSessionStatPayRecvErrors Number of payload packets incurring reception errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.4
juniL2tpSessionStatPayRecvDiscards Number of payload packets discarded after reception.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.5
juniL2tpSessionStatPaySendOctets Number of payload octets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.6
juniL2tpSessionStatPaySendPackets Number of payload packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.7
juniL2tpSessionStatPaySendErrors Number of payload packets incurring transmission errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.8
juniL2tpSessionStatPaySendDiscards Number of payload packets discarded before transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.9
juniL2tpSessionStatRecvOutOfSequence The number of packets received out of sequence.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.10
juniL2tpSessionStatResequencingTimeouts The number of reassembly timeouts that have occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.11
juniL2tpSessionStatPayLostPackets When sequence numbers are enabled, this value represents the estimated number of payload packets lost, based on observed gaps in sequence numbers. This estimate is subject to correction (decrement) upon receipt of out-…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.12

The L2TP UDP/IP destination table.  Reports the UDP/IP characteristics
of a L2TP UDP/IP destination.
          
A L2TP UDP/IP destination is associated with a local router, a local IP
address, and with a remote IP address for the L2TP peer.  More specific
UDP/IP detail per tunnel is reported in the juniL2tpUdpIpTunnelTable.

juniL2tpUdpIpDestEntry row .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1

Describes the UDP/IP attributes of an L2TP destination.

Indexes

juniL2tpUdpIpDestIfIndex

Column	Syntax	OID
juniL2tpUdpIpDestIfIndex Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.1
juniL2tpUdpIpDestRouterIndex The index of an entry in the juniRouterTable for the local router with which this L2TP destination interface is associated.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.2
juniL2tpUdpIpDestLocalAddress This L2TP destination's local IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.3
juniL2tpUdpIpDestRemoteAddress The IP address of the remote L2TP endpoint.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.4

The L2TP UDP/IP tunnel table.  Reports the UDP/IP characteristics of
L2TP UDP/IP tunnels.
          
A L2TP UDP/IP tunnel is defined in terms of the local and remote IP
addresses and UDP ports.

juniL2tpUdpIpTunnelEntry row .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1

An L2TP UDP/IP tunnel entry.

Indexes

juniL2tpUdpIpTunnelIfIndex

Column	Syntax	OID
juniL2tpUdpIpTunnelIfIndex Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.1
juniL2tpUdpIpTunnelRouterIndex The index of an entry in the juniRouterTable for the local router with which this L2TP tunnel interface is associated.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.2
juniL2tpUdpIpTunnelLocalAddress The local IP address for this UDP/IP tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.3
juniL2tpUdpIpTunnelLocalPort The local UDP port for this UDP/IP tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.4
juniL2tpUdpIpTunnelRemoteAddress The remote IP address for this UDP/IP tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.5
juniL2tpUdpIpTunnelRemotePort The remote UDP port for this UDP/IP tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.6
juniL2tpUdpIpTunnelRemoteReceiveAddress The remote receive IP address for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemoteAddress when the tunnel uses separate transmit and receive addresses to the remote peer.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.7
juniL2tpUdpIpTunnelRemoteReceivePort The remote receive UDP port for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemotePort when the tunnel uses separate transmit and receive ports to the remote peer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.8