Juniper-ISIS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
161

juniIsisSysTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.1 · 1 row entry · 45 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysTable' 
The set of instances of the Integrated IS-IS protocol existing on the
system.
juniIsisSysEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.1.1
Each row defines information specific to a single instance of the
protocol existing on the system.
Indexes
Column Syntax OID
juniIsisSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1
juniIsisSysVersion
The version number of the IS-IS protocol to which this instance
conforms. This value must be set by the implementation when the row is
valid.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2
juniIsisSysType
The type of this instance of the Integrated IS-IS protocol. This
object follows the replaceOnlyWhileDisabled behaviour.
Enumerationr/w
Enumerated Values:
1level1IS
2level1l2IS
3level2Only
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3
juniIsisSysID
The ID for this instance of the Integrated IS-IS protocol. This value
is appended to each of the instance's area addresses to form the Network
Entity Titles valid for this instance. The derivation of a value for
this …
SystemIDr/w
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4
juniIsisSysMaxPathSplits
Maximum number of paths with equal routing metric value which it is
permitted to split between. This object follows the
replaceOnlyWhileDisabled behaviour.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5
juniIsisSysMaxLSPGenInt
Maximum interval, in seconds, between generated LSPs by this instance.
This object follows the resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6
juniIsisSysOrigLSPBuffSize
The maximum size of LSPs and SNPs originated by this instance.
This object follows the replaceOnlyWhileDisabled behaviour.
LSPBuffSizer/w
Type Constraints:
range: 512..9180
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7
juniIsisSysMaxAreaAddresses
The maximum number of area addresses to be permitted for the area in
which this instance exists. Note that all Intermediate Systems in the
same area must have the same value configured for this attribute if
correct ope…
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8
juniIsisSysMinL1LSPGenInt
Minimum interval, in seconds, between successive generation of L1 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9
juniIsisSysMinL2LSPGenInt
Minimum interval, in seconds, between successive generation of L2 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10
juniIsisSysPollESHelloRate
The value, in seconds, to be used for the suggested ES configuration
timer in ISH PDUs when soliciting the ES configuration.
secondsInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11
juniIsisSysWaitTime
Number of seconds to delay in waiting state before entering on state.
This object follows the resettingTimer behaviour.
secondsInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12
juniIsisSysOperState
The operational state of this instance of the Integrated IS-IS
protocol. Setting this object to the value on when its current value is
off enables operation of this instance of the Integrated IS-IS
protocol.
OperStater/w
Type Values:
1off
2on
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13
juniIsisSysL1State
The state of the Level 1 database.
LevelState
Type Values:
1off
2on
3waiting
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14
juniIsisSysCorrLSPs
Number of corrupted LSPs detected.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15
juniIsisSysLSPL1DbaseOloads
Number of times the LSP L1 database has become overloaded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16
juniIsisSysManAddrDropFromAreas
Number of times a manual address has been dropped from the area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17
juniIsisSysAttmptToExMaxSeqNums
Number of times the IS has attempted to exceed the maximum sequence
number.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18
juniIsisSysSeqNumSkips
Number of times a sequence number skip has occurred.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19
juniIsisSysOwnLSPPurges
Number of times a zero-aged copy of the system's own LSP is received
from some other node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20
juniIsisSysIDFieldLenMismatches
Number of times a PDU is received with a different value for ID field
length to that of the receiving system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21
juniIsisSysMaxAreaAddrMismatches
Number of times a PDU is received with a different value for
MaximumAreaAddresses from that of the receiving system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22
juniIsisSysOrigL2LSPBuffSizeobsolete
The maximum size of Level 2 LSPs and SNPs originated by this system.
This object follows the replaceOnlyWhileDisabled behaviour.
LSPBuffSizer/w
Type Constraints:
range: 512..9180
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23
juniIsisSysL2State
The state of the Level 2 database.
LevelState
Type Values:
1off
2on
3waiting
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24
juniIsisSysLSPL2DbaseOloads
Number of times the Level 2 LSP database has become overloaded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25
juniIsisSysAuthFails
The number of authentication failures recognized by this instance of
the protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26
juniIsisSysLSPIgnoreErrors
If true, allow the router to ignore IS-IS link state packets (LSPs)
that are received with internal checksum errors rather than purging the
LSPs.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27
juniIsisSysMaxAreaCheck
When on, enables checking of maximum area addresses per IS version of
ISO10589.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28
juniIsisSysSetOverloadBit
Isis overload bit
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29
juniIsisSysSetOverloadBitStartupDuration
Specifies the length in time of seconds to set the overload bit from
startup. This object must be set together with
juniIsisSysSetOverloadBit, otherwise the agent will return zero.
Zero value for this object implies …
secondsInteger32r/w
Constraints:
range: 0-0
range: 5-86400
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30
juniIsisSysMaxLspLifetime
Specifies the maximum time (in seconds) a LSP will remain in the box
without being refreshed before being considered invalid.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31
juniIsisSysL1SpfInterval
Minimum interval, in seconds, between level 1 SPF calculations.
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32
juniIsisSysL2SpfInterval
Minimum interval, in seconds, between level 2 SPF calculations.
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33
juniIsisSysIshHoldTime
Specify a holdtime advertised in ESH/ISH PDUs.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34
juniIsisSysIshConfigTimer
Specify the rate of transmission for ESH and ISH packets.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35
juniIsisSysDistributeDomainWide
When on, enables distribution of prefixes throughout a multi-level
domain.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36
juniIsisSysDistance
The weight applied to IS-IS routes.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37
juniIsisSysL1MetricStyle
Specifies the type of IP reachability TLV to advertise in level 1
LSPs.
Enumerationr/w
Enumerated Values:
2juniIsisMetricStyleNarrow
3juniIsisMetricStyleNarrowTransition
4juniIsisMetricStyleTransition
5juniIsisMetricStyleWide
6juniIsisMetricStyleWideTransition
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38
juniIsisSysL2MetricStyle
Specifies the type of IP reachability TLV to advertise in level 2
LSPs.
Enumerationr/w
Enumerated Values:
2juniIsisMetricStyleNarrow
3juniIsisMetricStyleNarrowTransition
4juniIsisMetricStyleTransition
5juniIsisMetricStyleWide
6juniIsisMetricStyleWideTransition
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39
juniIsisSysIsoRouteTag
The ISO routing area tag.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40
juniIsisSysMplsTeLevel
Select flooding of MPLS traffic engineering link information into the
specified ISIS level.
Enumerationr/w
Enumerated Values:
0levelNone
1level1
2level2
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41
juniIsisSysMplsTeRtrIdIfIndex
Configure the stable router interface ID to designate it as TE capable.
A value of zero is used to remove any configured router interface ID.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42
juniIsisSysMplsTeSpfUseAnyBestPath
Configure whether or not to consider spf paths when alternate
tunnel path exists
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43
juniIsisSysReferenceBandwidth
Configure the reference bandwitdth used to calculate the link cost in
bits per second.If the reference bandwidth is greater than the maximum
value reportable by this object then this object should report its
maximum …
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44
juniIsisSysHighReferenceBandwidth
Configure the reference bandwitdth in mega bits per second.
It is used to calculate the link cost.
Unsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45

juniIsisManAreaAddrTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisManAreaAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisManAreaAddrTable' 
The set of manual area addresses configured on this Intermediate
System.
juniIsisManAreaAddrEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.2.1
Each entry contains one area address manually configured on this
system.
Indexes
Column Syntax OID
juniIsisManAreaAddrSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1
juniIsisManAreaAddr
A manually configured area address for this system. This object
follows the index behaviour.

Note: an index for the entry {1, {49.0001} active} in this table would
be the ordered pair (1, (0x03 0x49 0x0…
OSINSAddress
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2
juniIsisManAreaAddrRowStatus
The state of the juniIsisManAreaAddrEntry. This object follows the
RowStatus behaviour. If an attempt is made to set this object to the
value off when the corresponding juniIsisManAreaAddrEntry is the only
valid entry…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3

juniIsisSysProtSuppTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysProtSuppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysProtSuppTable' 
This table contains the manually configured set of protocols supported
by each instance of the Integrated ISIS protocol.
juniIsisSysProtSuppEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.3.1
Each entry contains one protocol supported by an instance of the
Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysProtSuppSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1
juniIsisSysProtSuppProtocol
One supported protocol. This object follows the index behaviour.
SupportedProtocol
Type Values:
129iso8473
204ip
205ipV6
 .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2
juniIsisSysProtSuppRowStatus
The state of the juniIsisSysProtSuppEntry. This object follows the
RowStatus behavior.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3

juniIsisSummAddrTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.4 · 1 row entry · 10 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSummAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSummAddrTable' 
The set of IP summary addresses to use in forming the contents of Level
2 LSPs originated by this level 2 Intermediate System.
juniIsisSummAddrEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.4.1
Each entry contains one IP summary address.
Indexes
Column Syntax OID
juniIsisSummAddrSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviours.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1
juniIsisSummAddress
The IP Address value for this summary address. This object follows the
index behaviour.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2
juniIsisSummAddrMask
The mask value for this summary address. This object follows the index
behaviour.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3
juniIsisSummAddrRowStatus
The existence state of this summary address. This object follows the
RowStatus behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4
juniIsisSummAddrOperState
The operational state of this entry. This object follows the
operationalState behaviour. When the operational state changes if this
would cause the contents of LSPs originated by the system to change then
those new LS…
OperStater/w
Type Values:
1off
2on
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5
juniIsisSummAddrDefaultMetric
The default metric value to announce this summary address with in Level
1 or 2 LSPs generated by this system. A Metric value of 0 indicates to
use the lowest metric value amongst the routes being summarized. When
adve…
Integer32r/w
Constraints:
range: 0-16777214
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6
juniIsisSummAddrDelayMetric
The delay metric value to announce this summary address with in Level 2
LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7
juniIsisSummAddrExpenseMetric
The expense metric value to announce this summary address with in Level
2 LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8
juniIsisSummAddrErrorMetric
The error metric value to announce this summary address with in Level n
LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9
juniIsisSummLevel
The level of database at which to annouce this summary.
Enumerationr/w
Enumerated Values:
1level1IS
2level2IS
3level1l2IS
 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10

juniIsisSysHostNameTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysHostNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysHostNameTable' 
This table contains the manually configured set of host name to system
ID aliases supported by each instance of the Integrated ISIS protocol.
juniIsisSysHostNameEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.5.1
Each entry contains one name to system ID alias supported by an
instance of the Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysHostNameSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1
juniIsisSysHostNameSysId
The ID for the system which this name will be assigned.
SystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2
juniIsisSysHostNameAreaAddr
A configured area address for the system which this name will be
assigned. This object follows the index behaviour.

Note: an index for the entry {1, {49.0001} active} in this table would
be the ordered p…
OSINSAddressr/w
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3
juniIsisSysHostNameName
A string to use when displaying system data with this system ID.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4
juniIsisSysHostNameType
The type of host name entry.
Enumeration
Enumerated Values:
1hostNameTypeStatic
2hostNameTypeDynamic
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5
juniIsisSysHostNameRowStatus
The status of this host name entry. This object follows the RowStatus
behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6

juniIsisSysAreaAuthenticationTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.6 · 1 row entry · 9 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysAreaAuthenticationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysAreaAuthenticationTable' 
This table contains the manually configured set of area authentication
keys supported by each instance of the Integrated ISIS protocol.
juniIsisSysAreaAuthenticationEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.6.1
Each entry contains one area authentication key supported by an
instance of the Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysAreaAuthenticationSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1
juniIsisSysAreaAuthenticationKeyId
The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2
juniIsisSysAreaAuthenticationPwd
The value to be used as the Authentication Key in Level 1 Link State
Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a
value of plaintext or hmacMd5. A modification of
juniIsisSysAreaAuthenticati…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3
juniIsisSysAreaAuthenticationKeyType
What authentication scheme, if any, is used to protect Level 1 Link
State packets and sequence number packets
Enumerationr/w
Enumerated Values:
0none
1plaintext
2hmacMd5
 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4
juniIsisSysAreaAuthenticationStartAcceptTime
The date and time when this authentication key will start to be used to
validate level 1 LSPs and SNPs received. The Default value the start
accept time will be the current time when the key was created
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5
juniIsisSysAreaAuthenticationStartGenerateTime
The date and time when this authentication key will start to be used to
authenticate level 1 LSPs and SNPs transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minu…
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6
juniIsisSysAreaAuthenticationStopAcceptTime
The date and time when this authentication key will stop being accepted
as a valid level 1 LSP and SNP key received. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7
juniIsisSysAreaAuthenticationStopGenerateTime
The date and time when this authentication key will stop being used to
authenticate level 1 LSPs and SNPs transmitted. A value of zero
indicates the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8
juniIsisSysAreaAuthenticationRowStatus
The existence state of this authentication key. This object follows
the RowStatus behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9

juniIsisSysDomainAuthenticationTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.7 · 1 row entry · 9 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysDomainAuthenticationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysDomainAuthenticationTable' 
This table contains the manually configured set of domain
authentication keys supported by each instance of the Integrated ISIS
protocol.
juniIsisSysDomainAuthenticationEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.7.1
Each entry contains one domain authentication key supported by an
instance of the Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysDomainAuthenticationSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1
juniIsisSysDomainAuthenticationKeyId
The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2
juniIsisSysDomainAuthenticationPwd
The value to be used as the Authentication Key in Level 2 Link State
Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has
a value of plaintext or hmacMd5. A modification of
juniIsisSysDomainAuthenti…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3
juniIsisSysDomainAuthenticationKeyType
What authentication scheme, if any, is used to protect Level 2 Link
State packets and Sequence Number packets
Enumerationr/w
Enumerated Values:
0none
1plaintext
2hmacMd5
 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4
juniIsisSysDomainAuthenticationStartAcceptTime
The date and time when this authentication key will start to be used to
validate level 2 LSPs and SNPs received. The Default value the start
accept time will be the current time when the key was created
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5
juniIsisSysDomainAuthenticationStartGenerateTime
The date and time when this authentication key will start to be used to
authenticate level 2 LSPs and SNPs transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minu…
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6
juniIsisSysDomainAuthenticationStopAcceptTime
The date and time when this authentication key will stop being accepted
as a valid level 2 LSP and SNP key received. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7
juniIsisSysDomainAuthenticationStopGenerateTime
The date and time when this authentication key will stop being used to
authenticate level 2 LSPs and SNPs transmitted. A value of zero
indicates the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8
juniIsisSysDomainAuthenticationRowStatus
The existence state of this authentication key. This object follows
the RowStatus behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9

juniIsisMplsTeTunnelTable

table
.1.3.6.1.4.1.4874.2.2.38.1.1.8 · 1 row entry · 7 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisMplsTeTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisMplsTeTunnelTable' 
The set of tunnels imported from MPLS.
juniIsisMplsTeTunnelEntry row .1.3.6.1.4.1.4874.2.2.38.1.1.8.1
Each entry contains metric details of an MPLS LSP
Indexes
Column Syntax OID
juniIsisMplsTeTunnelSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1
juniIsisMplsNextHopIndex
An index to uniquely identify the tunnels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2
juniIsisMplsTeSystemId
The ID for the instance of the Integrated IS-IS protocol
running in the tunnel's end point.
SystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3
juniIsisMplsTeRouterId
The router ID of the tunnel's end point.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4
juniIsisMplsTeTunnelMetric
The metric associated with the tunnel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5
juniIsisMplsTeTunnelRelMetric
The metric associated with the tunnel relative to the spf path.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6
juniIsisMplsTeTunnelName
The name associated with the tunnel.
OctetString
Constraints:
range: 1-40
 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7

juniIsisCircTable

table
.1.3.6.1.4.1.4874.2.2.38.1.2.1 · 1 row entry · 45 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisCircTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisCircTable' 
The table of circuits used by each instance of Integrated IS-IS on this
system.
juniIsisCircEntry row .1.3.6.1.4.1.4874.2.2.38.1.2.1.1
An juniIsisCircEntry exists for each circuit used by Integrated IS-IS
on this system.
Indexes
Column Syntax OID
juniIsisCircSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1
juniIsisCircIfIndex
The value of ifIndex for the interface to which this circuit
corresponds.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2
juniIsisCircLocalID
An identification that can be used in protocol packets to identify a
circuit. Implementations may devise ways to assure that this value is
suitable for the circuit it is used on. LAN packets only have space for
8 bits…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3
juniIsisCircOperState
The operational state of the circuit. This object follows the
operationalState behaviour.
OperStater/w
Type Values:
1off
2on
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4
juniIsisCircRowStatus
The existence state of this circuit. This object follows the RowStatus
behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5
juniIsisCircType
The type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified must be
compatible with the type of the interface defined by the value of
juniIsisCircIfIndex.
Enumeration
Enumerated Values:
1broadcast
2ptToPt
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6
juniIsisCircL1DefaultMetric
The default metric value of this circuit for Level 1 traffic.
JuniDefaultMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7
juniIsisCircL1DelayMetric
The delay metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8
juniIsisCircL1ExpenseMetric
The expense metric value of this circuit for Level 1 traffic. The
value of zero is reserved to indicate that this metric is not
supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9
juniIsisCircL1ErrorMetric
The error metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10
juniIsisCircExtDomain
If true, suppress normal transmission of and interpretation of
Intra-domain ISIS PDUs on this circuit.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11
juniIsisCircAdjChanges
The number of times an adjacency state change has occurred on this
circuit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12
juniIsisCircInitFails
The number of times initialization of this circuit has failed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13
juniIsisCircRejAdjs
The number of times an adjacency has been rejected on this circuit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14
juniIsisCircOutCtrlPDUs
The number of IS-IS control PDUs sent on this circuit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15
juniIsisCircInCtrlPDUs
The number of IS-IS control PDUs received on this circuit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16
juniIsisCircIDFieldLenMismatches
The number of times an IS-IS control PDU with an ID field length
different to that for this system has been received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17
juniIsisCircL2DefaultMetric
The default metric value of this circuit for level 2 traffic.
JuniDefaultMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18
juniIsisCircL2DelayMetric
The delay metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19
juniIsisCircL2ExpenseMetric
The expense metric value of this circuit for level 2 traffic. The
value of zero is reserved to indicate that this metric is not
supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20
juniIsisCircL2ErrorMetric
The error metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported.
OtherMetric
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21
juniIsisCircManL2Only
When true, indicates that this circuit is to be used only for level 2.
This object follows the replaceOnlyWhileDisabled behaviour.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22
juniIsisCircL1ISPriority
The priority for becoming LAN Level 1 Deignated Intermediate System on
a broadcast circuit.
ISPriorityr/w
Type Constraints:
range: 1..127
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23
juniIsisCircL1CircID
The LAN ID allocated by the LAN Level 1 Designated Intermediate System.
Where this system is not aware of the value (because it is not
participating in the Level 1 Designated Intermediate System election),
this object h…
CircuitID
Type Constraints:
range: 2..9
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24
juniIsisCircL1DesIS
The ID of the LAN Level 1 Designated Intermediate System on this
circuit. If, for any reason this system is not partaking in the
relevant Designated Intermediate System election process, then the value
returned is the …
SystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25
juniIsisCircLANL1DesISChanges
The number of times the LAN Level 1 Designated Intermediate System has
changed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26
juniIsisCircL2ISPriority
The priority for becoming LAN level 2 Designated Intermediate System.
ISPriorityr/w
Type Constraints:
range: 1..127
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27
juniIsisCircL2CircID
The LAN ID allocated by the LAN Level 2 Designated Intermediate System.
Where this system is not aware of this value (because it is not
participating in the Level 2 Designated Intermediate System election),
this object …
CircuitID
Type Constraints:
range: 2..9
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28
juniIsisCircL2DesIS
The ID of the LAN Level 2 Designated Intermediate System on this
circuit. If, for any reason, this system is not partaking in the
relevant Designated Intermediate System election process, then the value
returned is the…
SystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29
juniIsisCircLANL2DesISChanges
The number of times the LAN Level 2 Designated Intermediate System has
changed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30
juniIsisCircMCAddr
Specifies which type of multicast address will be used for sending
HELLO PDUs on this circuit.
Enumeration
Enumerated Values:
1group
2functional
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31
juniIsisCircPtToPtCircID
The ID of the circuit allocated during initialization. If no value has
been negotiated (either because the adjacency is to an End System, or
because initialization has not yet successfully completed), this object
has t…
CircuitID
Type Constraints:
range: 2..9
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32
juniIsisCircL1HelloTimer
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. It is also used as the period between Hellos on point to
point circuits. This object follows the resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33
juniIsisCircL2HelloTimer
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. This object follows the resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34
juniIsisCircL1HelloMultiplier
This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello packets from this IS.
Integer32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35
juniIsisCircL2HelloMultiplier
This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello packets from this IS
Integer32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36
juniIsisCircMinLSPTransInt
Minimum interval, in milliseconds, between transmission of LSPs on a
circuit. This object follows the resettingTimer behaviour. This timer
shall be capable of a resolution not coarser than 10 milliseconds.
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37
juniIsisCircMinLSPReTransInt
Minimum interval, in seconds, between re-transmission of an Level 1 or
2 LSP. This object follows the resettingTimer behaviour.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38
juniIsisCircL1CSNPInterval
Interval of time, in seconds, between transmission of Level 1 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
interval…
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39
juniIsisCircL2CSNPInterval
Interval of time, in seconds, between transmission of Level 2 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
interval …
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40
juniIsisCircLSPThrottle
Minimal interval of time, in milliseconds, between retransmissions of
LSPs on a point to point interface.
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41
juniIsisCircMeshGroupEnabled
Is this port a member of a mesh group, or blocked? Circuits in the
same mesh group act as a virtual multiaccess network. LSPs seen on one
circuit in a mesh group will not be flooded to another circuit in the
same mesh…
Enumerationr/w
Enumerated Values:
1inactive
2blocked
3set
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42
juniIsisCircMeshGroup
Circuits in the same mesh group act as a virtual multiaccess network.
LSPs seen on one circuit in a mesh group will not be flooded to another
circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is
false, th…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43
juniIsisCircLevel
The type of this circuit. This object follows the
replaceOnlyWhileDisabled behavior.
Enumerationr/w
Enumerated Values:
0level1IS
1level1l2IS
2level2Only
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44
juniIsisCircState
The operational state of the circuit.
Enumeration
Enumerated Values:
1isisCircuitDown
2isisCircuitUp
 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45

juniIsisSysL1CircAuthenticationTable

table
.1.3.6.1.4.1.4874.2.2.38.1.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysL1CircAuthenticationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysL1CircAuthenticationTable' 
This table contains the manually configured set of Level 1 Circuit
authentication keys supported by each instance of the Integrated ISIS
protocol.
juniIsisSysL1CircAuthenticationEntry row .1.3.6.1.4.1.4874.2.2.38.1.2.2.1
Each entry contains one Level 1 circuit authentication key supported by
an instance of the Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysL1CircAuthenticationSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1
juniIsisSysL1CircAuthenticationIfIndex
The value of ifIndex for the interface to which this circuit
corresponds.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2
juniIsisSysL1CircAuthenticationKeyId
The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3
juniIsisSysL1CircAuthenticationPwd
The value to be used as the Authentication Key in Level 1 Hello Packets
whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value
of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType
does…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4
juniIsisSysL1CircAuthenticationKeyType
What authentication scheme, if any, is used to protect Level 1 hello
packets.
Enumerationr/w
Enumerated Values:
0none
1plaintext
2hmacMd5
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5
juniIsisSysL1CircAuthenticationStartAcceptTime
The date and time when this authentication key will start to be used to
validate level 1 IIH packets received. The Default value the start
accept time will be the current time when the key was created.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6
juniIsisSysL1CircAuthenticationStartGenerateTime
The date and time when this authentication key will start to be used to
authenticate level 1 IIH packets transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minute…
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7
juniIsisSysL1CircAuthenticationStopAcceptTime
The date and time when this authentication key will stop being accepted
as a valid level 1 IIH packets key received. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8
juniIsisSysL1CircAuthenticationStopGenerateTime
The date and time when this authentication key will stop being used to
authenticate level 1 IIH packets transmitted. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9
juniIsisSysL1CircAuthenticationRowStatus
The existence state of this authentication key. This object follows
the RowStatus behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10

juniIsisSysL2CircAuthenticationTable

table
.1.3.6.1.4.1.4874.2.2.38.1.2.3 · 1 row entry · 10 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisSysL2CircAuthenticationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisSysL2CircAuthenticationTable' 
This table contains the manually configured set of Level 2 Circuit
authentication keys supported by each instance of the Integrated ISIS
protocol.
juniIsisSysL2CircAuthenticationEntry row .1.3.6.1.4.1.4874.2.2.38.1.2.3.1
Each entry contains one Level 2 circuit authentication key supported by
an instance of the Integrated ISIS protocol.
Indexes
Column Syntax OID
juniIsisSysL2CircAuthenticationSysInstance
The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1
juniIsisSysL2CircAuthenticationIfIndex
The value of ifIndex for the interface to which this circuit
corresponds.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2
juniIsisSysL2CircAuthenticationKeyId
The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3
juniIsisSysL2CircAuthenticationPwd
The value to be used as the Authentication Key in Level 2 Hello Packets
whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value
of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType
does…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4
juniIsisSysL2CircAuthenticationKeyType
What authentication scheme, if any, is used to protect Level 2 hello
packets.
Enumerationr/w
Enumerated Values:
0none
1plaintext
2hmacMd5
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5
juniIsisSysL2CircAuthenticationStartAcceptTime
The date and time when this authentication key will start to be used to
validate level 2 IIH packets received. The Default value the start
accept time will be the current time when the key was created.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6
juniIsisSysL2CircAuthenticationStartGenerateTime
The date and time when this authentication key will start to be used to
authenticate level 2 IIH packets transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minute…
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7
juniIsisSysL2CircAuthenticationStopAcceptTime
The date and time when this authentication key will stop being accepted
as a valid level 2 IIH packets key received. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8
juniIsisSysL2CircAuthenticationStopGenerateTime
The date and time when this authentication key will stop being used to
authenticate level 2 IIH packets transmitted. A value of zero indicates
the key will never stop being used to authenticate packets.
AuthTimer/w .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9
juniIsisSysL2CircAuthenticationRowStatus
The existence state of this authentication key. This object follows
the RowStatus behaviour.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10

juniIsisCircBFDTable

table
.1.3.6.1.4.1.4874.2.2.38.1.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIsisCircBFDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ISIS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ISIS-MIB::juniIsisCircBFDTable' 
The Juniper ISIS circuit table describes the BFD-specific
characteristics of interfaces.
juniIsisCircBFDEntry row .1.3.6.1.4.1.4874.2.2.38.1.2.4.1
The Juniper ISIS circuit table describes the BFD-specific
characteristics of one interface.
Indexes
No indexes recorded
Column Syntax OID
juniIsisCircBfdEnable
This variable indicates whether BFD session on the interface is active or not
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1
juniIsisCircBfdMinRxInterval
This variable specifies upper-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]
Integer32r/w
Constraints:
range: 100-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2
juniIsisCircBfdMinTxInterval
This variable specifies lower-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]
Integer32r/w
Constraints:
range: 100-65535
 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3
juniIsisCircBfdMultiplier
This variable specifies detection-multiplier
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4