Juniper-IP-PROFILE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
18
juniIpProfileTable
table
.1.3.6.1.4.1.4874.2.2.26.1.1.1
·
1 row entry
·
18 columns
Uses the junose variant from
Command help
/opt/observium/mibs/junose.
Walk juniIpProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-IP-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-IP-PROFILE-MIB::juniIpProfileTable'
The entries in this table describe profiles for configuring IP
interfaces.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
A profile describing configuration of an IP interface.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the juniProfileNameTable. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.1 |
||||||||||||
|
juniIpProfileRowStatusdeprecated
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET. The value of juniIpProfileId must match that of a profile name configured in juniProfileNameTa… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.2 |
||||||||||||
|
The virtual router to which an IP interface configured by this profile
will be assigned, if other mechanisms do not otherwise specify a virtual router assignment. |
Juniper-TCJuniNamer/w Type Constraints: range: 0..256 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.3 |
||||||||||||
|
An IP address to be used by an IP interface configured by this profile.
This object will have a value of 0.0.0.0 for an unnumbered interface. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.4 |
||||||||||||
|
An IP address mask to be used by an IP interface configured by this
profile. This object will have a value of 0.0.0.0 for an unnumbered interface. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.5 |
||||||||||||
|
Enable/disable forwarding of directed broadcasts on this IP network
interface. |
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.6 |
||||||||||||
|
Enable/disable transmission of ICMP Redirect messages on this IP
network interface. |
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.7 |
||||||||||||
|
Enable/disable whether a host route is automatically created for a
remote host attached to an IP interface that is configured using this profile. |
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.8 |
||||||||||||
|
The configured MTU size for this IP network interface. If set to zero,
the default MTU size, as determined by the underlying network media, is used. |
Integer32r/w Constraints: range: 0-0range: 512-10240 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.9 |
||||||||||||
|
juniIpProfileLoopbackIfIndexobsolete
For unnumbered interfaces, the IfIndex of the IP loopback interface
whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback interface is unspecified (e.g., when the… |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.10 |
||||||||||||
|
juniIpProfileLoopbackobsolete
The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. For … |
Integer32r/w Constraints: range: -1-2147483647 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.11 |
||||||||||||
|
A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excl… |
Juniper-TCJuniSetMapr/w Type Constraints: range: 0..8 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.12 |
||||||||||||
|
Enable/disable whether source addresses in received IP packets are
validated. Validation is performed by looking up the source IP address in the routing database and determining whether the packet arrived on the expecte… |
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.13 |
||||||||||||
|
The text identifier of the numbered interface, associated with the
specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. Types/form… |
OctetStringr/w Constraints: range: 0-80 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.14 |
||||||||||||
|
Configures TCP MSS value for an IP interface. When configured,
MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the … |
Integer32r/w Constraints: range: 0-0range: 160-10240 |
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.15 |
||||||||||||
|
Enable/disable whether IP packets containing options are to be discarded or sent
to the control plane for processing. |
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.16 |
||||||||||||
|
Enable/disable whether J-Flow is enabled on the interface
|
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.17 |
||||||||||||
|
Enable/disable Blocking Multicast traffic
|
Juniper-TCJuniEnabler/w Type Values:
|
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.18 |
