Juniper-IP-MIB Table View

This table contains entries for IP interfaces present in the system.

juniIpIfEntry row .1.3.6.1.4.1.4874.2.2.12.1.1.2.1

Each entry describes the characteristics of an IP interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.

Indexes

No indexes recorded

Column	Syntax	OID
juniIpIfIndex The ifIndex of the IP interface. When creating entries in this table, suitable values for this object are determined by reading juniIpNextIfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.1
juniIpIfRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.2
juniIpIfLowerIfIndex The ifIndex of a media interface over which this IP interface is to be layered. A value of zero is used when juniIpIfType is specified to be loopback(4) or null(5).	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.3
juniIpIfType The type of network interface.	Enumerationr/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.4
juniIpIfTypeId A numerical distinguisher relevant for the loopback and null IP interface types. loopback Must be unique for all IP interfaces of this type. null Must be unique for all IP interfaces of this type. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.5
juniIpIfSAValidationEnable Enable/disable source address validation on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.6
juniIpIfCreationType Specify if the interface was created due to static configuration or due to some dynamic event. Dynamic interfaces are not stored in NVS.	Enumeration	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.7
juniIpIfProfileId Identified the profile used when creating a dynamic interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.8
juniIpIfAlwaysUp When enabled, the interface is determined to be up regardless of the state of any lower layer interfaces.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.9
juniIpIfLoopbackdeprecated Indicates whether the interface is a loopback type interface. This object has been replaced by juniIpIfInheritNum.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.10
juniIpIfLoopbackUiddeprecated Specify the interface index of a loopback interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces. This object has been replaced by juniIpIfInh…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.11
juniIpIfDebounceTime Specifies the time in milliseconds that a layer 2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A v…	millisecondsInteger32r/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.12
juniIpIfForwarding Enable/disable the forwarding of IP traffic to/from this interface. This is currently only applicable to the out-of-band management port.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.13
juniIpIfForceFragmentation Force the fragmentation of all IP packets greater than the interface MTU even if the DF bit is set.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.14
juniIpIfSharesLowerUid Identifies the interface as sharing a lower interface with another interface vs owning it outright.	Juniper-TCJuniEnable Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.15
juniIpIfFilterOptions Bit mask to configure the interface to filter packets with IP header options. Currently, either no bits or all bits may be set.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.16
juniIpIfName Specify the IP interface discriminator for an IP interface not attached to a layer 2 interface with a specific location.	OctetStringr/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.17
juniIpIfArpTimeout Specify the ARP timeout for this interface in seconds.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.18
juniIpIfAdminSpeed Set an administrative speed for the interface that overrides the speed learned from the lower layer. A value of 0 indicates no speed is specified.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.19
juniIpIfMultipathMode Configure the mode this interface should use when forwarding equal-cost multipath traffic.	Enumerationr/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.20
juniIpIfSharedNhAddr The IP address of either a direct or indirect next-hop toward which this shared interface should point.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.21
juniIpIfSharedNhRouterId The identifier for the domain of a virtual router in which the juniIpIfSharedNhAddr should be resolved.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.22
juniIpIfPrimaryIpAddress The IP address of the primary IP network on an interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.23
juniIpIfPrimaryIpMask The IP address mask of the primary IP network on an interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.24
juniIpIfOperDebounceTime Indicates the operational time in milliseconds that a layer2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a rout…	millisecondsInteger32	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.25
juniIpIfRouterIndex The index or ID of the router.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.26
juniIpIfInheritNum Indicates whether this numbered interface is referenced by unnumbered interfaces.	Juniper-TCJuniEnable Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.27
juniIpIfInheritNumUid Specify the interface index of a numbered interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.28
juniIpIfAnalyzerMode Used to set the interface to analyzer mode. When enabled(1), all IP packets entering this interface and all non-mirror IP packets leaving this interface will be dropped. The value default(2) specifies that this interf…	Enumerationr/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.29
juniIpIfAutoConfigure When enabled, IP subscriber interfaces are created dynamically based on any attributes defined in the service-profile and the rules associated with the DCM profile selected for this subscriber.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.30
juniIpIfTcpMss Configures TCP MSS value for an IP interface. When configured, MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the val…	Integer32r/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.31
juniIpIfInitSeqPrefOper Indicates the operational warm-restart replay initial sequence preference value for an IP interface. Following an HA SRP switchover, high-preference (value 1) IP interfaces are replayed first, followed by static routes…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.32
juniIpIfInitSeqPrefAdmin Configures the warm-restart replay initial sequence preference value for an IP interface. See the juniIpIfInitSeqPrefOper description for more information.	Unsigned32r/w	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.33
juniIpIfArpSpoofCheck When enabled, IP ARP spoof checking is performed on ARP packets received on the IP interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.1.2.1.34

This table contains entries for IP interfaces present in the system.

juniIpIfStatsEntry row .1.3.6.1.4.1.4874.2.2.12.1.1.3.1

Each entry contains statistics for an IP interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniIpIfStatsIndex The ifIndex of the IP interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.1
juniIpIfStatsInPackets The number of packets received on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.2
juniIpIfStatsInOctets The number of octets received on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.3
juniIpIfStatsInPoliciedPackets The number of packets dropped due to rate limiters attached to this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.4
juniIpIfStatsInPoliciedOctets The number of octets dropped due to rate limiters attached to this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.5
juniIpIfStatsInErrorPackets The number of packets received with errors on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.6
juniIpIfStatsInSpoofedPackets The number of packets received on this interface with destination unknown.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.7
juniIpIfStatsInForwardedPacketsobsolete The number of packets received on this interface that were forwarded by any interface in the system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.8
juniIpIfStatsInForwardedOctetsobsolete The number of octets received on this interface that were forwarded by any interface in the system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.9
juniIpIfStatsOutForwardedPackets The number of packets forwarded by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.10
juniIpIfStatsOutForwardedOctets The number of octets forwarded by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.11
juniIpIfStatsOutSchedDropPackets The number of packets dropped at this interface due to output queue congestion.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.12
juniIpIfStatsOutSchedDropOctets The number of octets dropped at this interface due to output queue congestion.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.13
juniIpIfStatsOutRequestedPacketsobsolete The number of packets requested for transmission at this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.14
juniIpIfStatsOutRequestedOctetsobsolete The number of octets requested for transmission at this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.15
juniIpIfStatsOutPoliciedPackets The number of packets dropped due to rate limiters attached to this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.16
juniIpIfStatsOutPoliciedOctets The number of octets dropped due to rate limiters attached to this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.17
juniIpIfStatsGreenOutSchedDropPacketsobsolete The number of packets dropped at this interface due to output queue congestion in the green output queue. The green output queue has lowest drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.18
juniIpIfStatsYellowOutSchedDropPacketsobsolete The number of packets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has medium level drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.19
juniIpIfStatsRedOutSchedDropPacketsobsolete The number of packets dropped at this interface due to output queue congestion in the red output queue. The red output queue has highest level drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.20
juniIpIfStatsGreenOutSchedDropOctetsobsolete The number of octets dropped at this interface due to output queue congestion in the green output queue. The green output queue has the lowest drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.21
juniIpIfStatsYellowOutSchedDropOctetsobsolete The number of octets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has the medium drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.22
juniIpIfStatsRedOutSchedDropOctetsobsolete The number of octets dropped at this interface due to output queue congestion in the red output queue. The red output queue has the highest drop probability.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.12.1.1.3.1.23

This table contains entries of interfaces present in the system.

juniIpIfAssocEntry row .1.3.6.1.4.1.4874.2.2.12.1.1.4.1

Each entry in this table returns the ifIndex of the IP interface
associated with the lower layer ifIndex supplied as the index to this
table.

The purpose of this table is to translate L2 interfaces to corre…

Indexes

No indexes recorded

Column	Syntax	OID
juniIpIfAssocLowerIfIndex The ifIndex of the lower layer interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.12.1.1.4.1.1
juniIpIfAssocIpIfIndex The ifIndex of the IP interface associated with the lower layer juniIpIfAssocLowerIfIndex. In cases where there is not a 1 to 1 relationship between lower layer and higher layer IP interface, a zero value juniIpIfAssoc…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2

IP addressing information for this entity's IP network interfaces.
Representation of both numbered and unnumbered IP interfaces is
supported.

juniIpAddrEntry row .1.3.6.1.4.1.4874.2.2.12.1.2.2.1

IP addressing information for one of this entity's IP network
interfaces. This interface could be either numbered or unnumbered.

The following objects correspond to (read-only) counterparts in the
IP-MIB i…

Indexes

No indexes recorded

Column	Syntax	OID
juniIpAdEntAddr The IP address for a numbered IP network interface, if this object's value has the form 'a.b.c.d', where 'a' is nonzero; or, the ifIndex (interpreting the low 24 bits of this value as an integer) of an unnumbered ('addr…	Juniper-TCJuniIpAddrLessIf	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.1
juniIpAdEntIfIndex The ifIndex of the network interface to which this entry's IP addressing mode pertains.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.2
juniIpAdEntNetMask The IP subnet mask associated with the IP address of this entry. The network and host bit fields of the mask are filled with 1's and 0's, respectively. If this entry represents an unnumbered IP interface…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.3
juniIpAdEntBcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the IP network interface associated with this entry. For example, when the Internet standard all-ones broadcast address i…	Integer32	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.4
juniIpAdEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.	Integer32	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.5
juniIpAdEntRowStatus Controls the creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create entries for b…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.6
juniIpAdEntAdminStatus Enable/disable operation of IP on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7
juniIpAdEntArpRspEnable Enable/disable ARP response on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.8
juniIpAdEntProxyArpRspEnable Enable/disable proxy ARP response on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.9
juniIpAdEntIgmpEnabledeprecated Enable/disable IGMP operation on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.10
juniIpAdEntDirectedBcastEnable Enable/disable forwarding of directed broadcasts on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.11
juniIpAdEntIcmpRedirectEnable Enable/disable transmission of ICMP Redirect messages on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.12
juniIpAdEntIcmpMaskReplyEnable Enable/disable transmission of ICMP Mask Reply messages on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.13
juniIpAdEntIcmpUnreachEnable Enable/disable transmission of ICMP Unreachable messages on this IP network interface.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.14
juniIpAdEntMtu The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.	Integer32r/w	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.15
juniIpAdEntUnnumLoopbackIfIndexdeprecated For unnumbered interfaces, the ifIndex of the IP loopback interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this ob…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.16
juniIpAdEntIrdpEnable Controls whether ICMP Router Discovery Protocol operation is permitted to be sent on this network.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.17
juniIpAdEntAccessRouteEnable If enabled, then establishment/loss of a point-to-point network connection causes a host route for the remote host to be created/deleted automatically.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.18
juniIpAdEntAccessRouteHost If an access route has been established, the IP address of the remote host is reported by this object; otherwise, this object contains the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.19
juniIpAdEntIsSecondary If enabled, then the IP address corresponding to this entry is a secondary address. If disabled, then the IP address corresponding to this entry is te primary address.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.20
juniIpAdEntUnnumInheritNumIfIndex For unnumbered interfaces, the ifIndex of the IP numbered interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this ob…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.21

Table of static routes configured on this entity.
          
The object definitions and indexing for this table are chosen to closely
align with the IP-FORWARD-MIB's ipCidrRouteTable.
          
This  table serves three purposes:
1. Provide the means for configuring static routes.
2. Provide an efficient view of static routes (otherwise they must be
   observed by traversing the entire routing table).
3. Provide view of static routes configured on network interfaces that
   are currently inactive.  (In this implementation, static routes
   configured on inactive interfaces are not visible in the routing
   table.)

juniIpRouteStaticEntry row .1.3.6.1.4.1.4874.2.2.12.1.3.2.1

A static route.

Indexes

No indexes recorded

Column	Syntax	OID
juniIpRouteStaticDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x mus…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.1
juniIpRouteStaticMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the juniIpRouteStaticDest field. For those systems that do not support arbitrary subnet masks, an agent constructs…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.2
juniIpRouteStaticPref The preference of this static route. Higher values correspond to higher preference. A static route with preference of zero will never be installed as an active route.	Integer32	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.3
juniIpRouteStaticNextHop The address of the next hop toward the destination.	Juniper-TCJuniIpAddrLessIf	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.4
juniIpRouteStaticRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.5
juniIpRouteStaticIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of zero means the router should automatically determine the interface through which the specifi…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.6
juniIpRouteStaticStatus The operational status of this static route. active(0) indicates this route is currently being used to reach the specified destination. inactive(1) indicates this route is considered valid,…	Enumeration	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7
juniIpRouteStaticNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.8
juniIpRouteStaticMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.9
juniIpRouteStaticTag A tag value for this static route.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.10
juniIpRouteStaticNullIntf This variable configures a static route with null0 as nexthop to reject/discard packets on the ingress	Enumerationr/w	.1.3.6.1.4.1.4874.2.2.12.1.3.2.1.11

Table of routes active on this entity.  This table is an augmentation
of the IP-FORWARD-MIB's ipCidrRouteTable.

juniIpCidrRouteEntry row .1.3.6.1.4.1.4874.2.2.12.1.3.3.1

Additional attributes of an active route.

Indexes

No indexes recorded

Column	Syntax	OID
juniIpCidrRoutePref The preference of this route. Higher values correspond to higher preference.	Integer32	.1.3.6.1.4.1.4874.2.2.12.1.3.3.1.1
juniIpCidrRouteArea The Area to which this route pertains. A value of 0.0.0.0 indicates no area is identified.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.12.1.3.3.1.2
juniIpCidrRouteTag A tag value for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.12.1.3.3.1.3

The Juniper IP interface table describes the BFD-specific
characteristics of interfaces.

juniIpRouteStaticBFDEntry row .1.3.6.1.4.1.4874.2.2.12.1.3.4.1

The Juniper IP interface table describes the BFD-specific
characteristics of one interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniIpRouteStaticBfdEnable This variable indicates whether BFD session on the interface is active or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.12.1.3.4.1.1
juniIpRouteStaticBfdMinRxInterval This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]	Integer32r/w	.1.3.6.1.4.1.4874.2.2.12.1.3.4.1.2
juniIpRouteStaticBfdMinTxInterval This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]	Integer32r/w	.1.3.6.1.4.1.4874.2.2.12.1.3.4.1.3
juniIpRouteStaticBfdMultiplier This variable specifies detection-multiplier	Integer32r/w	.1.3.6.1.4.1.4874.2.2.12.1.3.4.1.4