Juniper-DVMRP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
29

juniDvmrpAclDistNbrTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpAclDistNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpAclDistNbrTable' 
The (conceptual) table listing the access lists distance for a list of
neighbors.
juniDvmrpAclDistNbrEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.2.1
An entry (conceptual row) in the juniDvmrpAclDistNbrTable.
Indexes
Column Syntax OID
juniDvmrpAclDistNbrIfIndex
The ifIndex value of the interface for which DVMRP is enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.44.1.1.2.1.1
juniDvmrpAclDistNbrAclListName
The name of the access list to be used in the filter.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.44.1.1.2.1.2
juniDvmrpAclDistNbrDistance
The administritive distance metric that will be used
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.44.1.1.2.1.3
juniDvmrpAclDistNbrNbrListName
This is the access list of nbrs for this accept-filter to be applied,
this field must be supplied when the row is created
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.44.1.1.2.1.4
juniDvmrpAclDistNbrStatus
The status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.44.1.1.2.1.5

juniDvmrpLocalAddrTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpLocalAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpLocalAddrTable' 
The (conceptual) table listing the local addresses.  This is used to
retrive all of the addresses configured on a DVMRP interface.
juniDvmrpLocalAddrTableEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.3.1
An entry (conceptual row) in the juniDvmrpLocalAddrTable.
Indexes
Column Syntax OID
juniDvmrpLocalAddrIfIndex
The ifIndex value of the interface for which DVMRP is enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.44.1.1.3.1.1
juniDvmrpLocalAddrAddrOrIfIndex
For unnumbered interfaces, this takes on the value of the ifIndex. For
numbered interfaces, this is the address of one of the addresses
associated with the interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.44.1.1.3.1.2
juniDvmrpLocalAddrMask
The IP Address mask associated with this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.3.1.3

juniDvmrpSummaryAddrTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpSummaryAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpSummaryAddrTable' 
The (conceptual) table listing the DVMRP summary addresses.  This is
used to retrive all of the summary address configured on a DVMRP
interface.
juniDvmrpSummaryAddrTableEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.4.1
An entry (conceptual row) in the juniDvmrpSummaryAddrTable.
Indexes
Column Syntax OID
juniDvmrpSummaryAddrIfIndex
The ifIndex value of the interface for which DVMRP is enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.44.1.1.4.1.1
juniDvmrpSummaryAddrAddress
This is the summary address that will be created.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.4.1.2
juniDvmrpSummaryAddrMask
The mask of the summary address to be created.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.4.1.3
juniDvmrpSummaryAddrCost
The administritive distance metric used to actually calculate distance
vectors.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.44.1.1.4.1.4
juniDvmrpSummaryAddrStatus
The status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.44.1.1.4.1.5

juniDvmrpInterfaceTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpInterfaceTable' 
The (conceptual) table listing the router's multicast-capable
interfaces.  This table augments the DvmrpInterfaceTable.
juniDvmrpInterfaceEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.5.1
An entry (conceptual row) in the juniDvmrpInterfaceTable. This row
extends ipMRouteInterfaceEntry in the IP Multicast MIB, where the
threshold object resides.
Indexes
No indexes recorded
Column Syntax OID
juniDvmrpInterfaceAutoSummary
Enables or disable auto-summarization on this interface.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.44.1.1.5.1.3
juniDvmrpInterfaceMetricOffsetOut
The distance metric for this interface which is used to calculate
outbound distance vectors.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.44.1.1.5.1.4
juniDvmrpInterfaceMetricOffsetIn
The distance metric for this interface which is used to calculate
inbound distance vectors.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.44.1.1.5.1.5
juniDvmrpInterfaceAdminState
Controls whether DVMRP is enabled or not.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.44.1.1.5.1.6
juniDvmrpInterfaceAnnounceListName
Configures the name of the acceptance announce filter for the IP access
list.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4874.2.2.44.1.1.5.1.7

juniDvmrpPruneTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpPruneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpPruneTable' 
The (conceptual) table listing the router's upstream prune state.
juniDvmrpPruneEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.6.1
An entry (conceptual row) in the juniDvmrpPruneTable.
Indexes
Column Syntax OID
juniDvmrpPruneGroup
The group address which has been pruned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.6.1.1
juniDvmrpPruneSource
The address of the source or source network which has been pruned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.6.1.2
juniDvmrpPruneSourceMask
The address of the source or source network which has been pruned. The
mask must either be all 1's, or else juniDvmrpPruneSource and
juniDvmrpPruneSourceMask must match juniDvmrpRouteSource and
juniDvmrpRouteSourceMask…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.6.1.3
juniDvmrpPruneIIFIfIndex
The ifIndex of the upstream interface for this source group entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.44.1.1.6.1.4
juniDvmrpPruneUpTime
This is the amount of time that this prune has remained valid.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.44.1.1.6.1.5

juniDvmrpSrcGrpOifTable

table
.1.3.6.1.4.1.4874.2.2.44.1.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDvmrpSrcGrpOifTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DVMRP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DVMRP-MIB::juniDvmrpSrcGrpOifTable' 
The (conceptual) OIFs for particular source group entries.
juniDvmrpSrcGrpOifEntry row .1.3.6.1.4.1.4874.2.2.44.1.1.7.1
An entry (conceptual row) in the juniDvmrpSrcGrpOifTable.
Indexes
Column Syntax OID
juniDvmrpSrcGrpOifGroup
The group address which has been pruned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.1
juniDvmrpSrcGrpOifSource
The address of the source or source network which has been pruned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.2
juniDvmrpSrcGrpOifSourceMask
The address of the source or source network which has been pruned. The
mask must either be all 1's, or else juniDvmrpPruneSource and
juniDvmrpPruneSourceMask must match juniDvmrpRouteSource and
juniDvmrpRouteSourceMask…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.3
juniDvmrpSrcGrpOifOIFIfIndex
The ifIndex of one of the downstream interfaces for this source group
entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.4
juniDvmrpSrcGrpOifOIFPruned
If true this OIF has been pruned.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.5
juniDvmrpSrcGrpOifOIFDnTTL
The timeout for this OIF. If juniDvmrpSrcGrpOifOIFPruned is false
then this is undefined.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.44.1.1.7.1.6