Juniper-DNS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
8
.1.3.6.1.4.1.4874.2.2.47.1.2.2 · 1 row entry · 5 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDnsServerListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DNS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DNS-MIB::juniDnsServerListTable'
This table contains an entry for each DNS server.
juniDnsServerListEntry row .1.3.6.1.4.1.4874.2.2.47.1.2.2.1
Each entry corresponds to an associated DNS server.
Column Syntax OID
The index of the DNS server. When creating entries in this table,
suitable values for this object are determined by reading
juniDnsServerListNextIndex.
ServerListIndex
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.4874.2.2.47.1.2.2.1.1
The IP address of the DNS server. This object has been replaced by
juniDnsV4V6ServerListAddressType and juniDnsV4V6ServerListAddress.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.47.1.2.2.1.2
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.47.1.2.2.1.3
The type of IP address (IPv4 or IPv6) of the DNS server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4874.2.2.47.1.2.2.1.4
The IP address of the DNS server.

Note: Since this object is used to configure the IPv4 or IPv6 address
depending on juniDnsV4V6ServerListAddressType value, it is
mandatory to provide the IPv…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4874.2.2.47.1.2.2.1.5
.1.3.6.1.4.1.4874.2.2.47.1.3.2 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDnsLocalDomainNameListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DNS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DNS-MIB::juniDnsLocalDomainNameListTable'
This table contains an entry for each recognized local domain name.
juniDnsLocalDomainNameListEntry row .1.3.6.1.4.1.4874.2.2.47.1.3.2.1
Each entry corresponds to a recognized local domain name.
Column Syntax OID
The index of the domain name. When creating entries in this table,
suitable values for this object are determined by reading
juniDnsLocalDomainNameListNextIndex.
LocalDomainNameListIndex
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.4874.2.2.47.1.3.2.1.1
A recognized local domain name.
LocalDomainNamer/w
Type Constraints:
range: 0..1025
.1.3.6.1.4.1.4874.2.2.47.1.3.2.1.2
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.47.1.3.2.1.3