Juniper-COPS-MIB

        The Common Open Policy Service (COPS) Protocol MIB for the Juniper
Networks enterprise.
    
Source file
Juniper-COPS-MIB
Last revised
Identity
juniCopsProtocolMIB
Base OID
1.3.6.1.4.1.4874.2.2.37
Imported Objects
Juniper-MIBs juniMibs
Juniper-TC JuniName
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-COPS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-COPS-MIB::juniCopsProtocolMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-COPS-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-COPS-MIB::juniCopsProtocolMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (40)
.1.3.6.1.4.1.4874.2.2.37
.1.3.6.1.4.1.4874.2.2.37.1
.1.3.6.1.4.1.4874.2.2.37.1.1
.1.3.6.1.4.1.4874.2.2.37.1.2
.1.3.6.1.4.1.4874.2.2.37.1.3
.1.3.6.1.4.1.4874.2.2.37.1.3.1
.1.3.6.1.4.1.4874.2.2.37.1.3.1.1
.1.3.6.1.4.1.4874.2.2.37.1.3.1.2
.1.3.6.1.4.1.4874.2.2.37.1.3.1.3
.1.3.6.1.4.1.4874.2.2.37.1.3.1.4
.1.3.6.1.4.1.4874.2.2.37.1.3.1.5
.1.3.6.1.4.1.4874.2.2.37.1.3.1.6
.1.3.6.1.4.1.4874.2.2.37.1.3.1.7
.1.3.6.1.4.1.4874.2.2.37.1.3.1.8
.1.3.6.1.4.1.4874.2.2.37.1.3.1.9
.1.3.6.1.4.1.4874.2.2.37.1.4
.1.3.6.1.4.1.4874.2.2.37.1.4.1
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1
Integer32
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.1
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.10
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.11
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.12
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.13
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.14
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.15
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.16
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.17
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.18
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.19
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.2
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.3
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.4
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.5
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.6
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.7
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.8
.1.3.6.1.4.1.4874.2.2.37.1.4.1.1.9
.1.3.6.1.4.1.4874.2.2.37.4
.1.3.6.1.4.1.4874.2.2.37.4.1
.1.3.6.1.4.1.4874.2.2.37.4.2
Dependencies (6) 4 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. Juniper-UNI-SMIjunose
  3. Juniper-MIBsjunose
  4. SNMPv2-TCrfc
  5. Juniper-TCjunose
  6. SNMPv2-CONFrfc
  7. Juniper-COPS-MIBjunoseselected
Conformance Groups (2)
Obsolete basic collection of objects providing management of the COPS
Protocol. This group became obsolete when the local address and
transport router name objects were add.
.1.3.6.1.4.1.4874.2.2.37.4.2.1
The basic collection of objects providing management of the COPS
Protocol.
.1.3.6.1.4.1.4874.2.2.37.4.2.2
Compliance Statements (2)

OID .1.3.6.1.4.1.4874.2.2.37.4.1.1
Current compliance statement for authentication clients implementing
the Juniper COPS Protocol MIB authentication functionality. This
statement became obsolete when the local address and transport router
name objects were add.
Required groups

OID .1.3.6.1.4.1.4874.2.2.37.4.1.2
The compliance statement for authentication clients implementing the
Juniper COPS Protocol MIB authentication functionality.
Required groups