Juniper-AUTOCONFIGURE-MIB Table View

Configures recognition of incoming data encapsulation types that
trigger autoconfiguration on an interface.  Also, configures the
time range that the encapsulation type will be locked-out from 
recognition in the event of an error in creating an interface of
the encapsulation type.

juniAutoConfEntry row .1.3.6.1.4.1.4874.2.2.48.1.1.1.1

Configures recognition of an incoming data encapsulation type that
triggers autoconfiguration on an interface. Also, configures the
time range that the encapsulation type will be locked-out from
recognition in the eve…

Indexes

juniAutoConfIfIndex juniAutoConfEncaps

Column	Syntax	OID
juniAutoConfIfIndex The ifIndex of the interface to which the autoconfiguration information in this entry applies.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.1
juniAutoConfEncaps The encapsulated protocol type to which the autoconfiguration information in this entry applies.	JuniAutoConfEncaps Type Values: 0 ip 1 ppp 17 pppoe 19 bridgedEthernet	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.2
juniAutoConfEnable When enabled, permits autoconfiguration of the specified interface when the specified encapsulation is recognized in an incoming data frame.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.3
juniAutoConfLockoutSupported Indicates whether lockout is supported for the specified encapsulation type for the specified interface. If lockout is supported, then juniAutoConfLockoutMin, juniAutoConfLockoutMax, juniAutoConfLockoutTime, juniAutoC…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.4
juniAutoConfLockoutMin The lower bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This only takes effect if juniAutoConfEnable is set t…	Integer32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5
juniAutoConfLockoutMax The upper bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This value must equal or exceed the value for juniAut…	Integer32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.6
juniAutoConfLockoutTime The time duration, in seconds, currently used to lockout the specified encapsulation type from recognition for the specified interface. The reported value is within the range specified by juniAutoConfLockoutMin and jun…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.7
juniAutoConfLockoutElapsedTime The elapsed time, in seconds, that the specified encapsulation type has been locked-out from recognition for the specified interface. Its value will not exceed that of juniAutoConfLockoutTime. A value of 0 indicates …	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.8
juniAutoConfNextLockoutTime The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event that results in a lockout condition. The reported value is wi…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9