Standard view Table view

Juniper-ATM-CONF

        Juniper-UNI-ATM-MIB:
The agent capabilities definitions for the ATM component of the SNMP
agent in the Juniper E-series family of products.
Source file
Juniper-ATM-CONF
Last revised
Identity
juniAtmAgent
Base OID
1.3.6.1.4.1.4874.5.2.3
Imported Objects
ATM-FORUM-SNMP-M4-MIB atmfM4AtmLayerGroup atmfM4General atmfM4IfFarEndCarrierNetwork atmfM4IfPreferredCarrier atmfM4IfSubscriberAddress atmfM4IfType atmfM4NeAlarmSeverityIndex atmfM4NeStartTime atmfM4NeSuppressZeroStats atmfM4NeVersion atmfM4VclSegEndPt atmfM4VcTestGroup atmfM4VpTestGroup
ATM-MIB aal5VccGroup atmInterfaceConfGroup2 atmInterfaceTCGroup atmVccAalType atmVccTerminationGroup2 atmVclAdminStatus atmVclCastType atmVclConnKind atmVclReceiveTrafficDescrIndex atmVclRowStatus atmVclTransmitTrafficDescrIndex
ATM2-MIB atmAddrVclAddrType atmCommonGroup atmCurrentlyFailingPVclTimeStamp atmCurrentlyFailingPVplTimeStamp atmHostGroup atmInterfaceConfMaxSvccVpi atmInterfaceConfMaxSvpcVpi atmInterfaceConfMinSvccVci atmInterfaceCurrentMaxSvccVpi atmInterfaceCurrentMaxSvpcVpi atmInterfaceCurrentMinSvccVci atmIntfLeafSetupFailures atmIntfLeafSetupRequests atmIntfSigVccRxTrafficDescrIndex atmIntfSigVccTxTrafficDescrIndex atmSigDetectCldPtyEvents atmSigDetectClgPtyEvents atmSigDetectMsgErrors atmSigDetectRestarts atmSigDetectSetupAttempts atmSigDetectTimerExpireds atmSigDetectUnavailResrcs atmSigDetectUnavailRoutes atmSigEmitCldPtyEvents atmSigEmitClgPtyEvents atmSigEmitMsgErrors atmSigEmitRestarts atmSigEmitSetupAttempts atmSigEmitTimerExpireds atmSigEmitUnavailResrcs atmSigEmitUnavailRoutes atmSigInEstabls atmSigOutEstabls atmSigSSCOPConEvents atmSigSSCOPErrdPdus atmVclAddrRowStatus atmVclAddrType atmVclGenSigDescrIndex atmVplLogicalPortDef atmVplLogicalPortIndex
Juniper-Agents juniAgents
Juniper-UNI-ATM-MIB juniAtmAal5Group juniAtmF4OamCircuitGroup juniAtmF4OamCircuitGroup2 juniAtmGroup juniAtmGroup2 juniAtmGroup3 juniAtmGroup4 juniAtmGroup5 juniAtmGroup6 juniAtmGroup7 juniAtmGroup8 juniAtmLocationGroup juniAtmNbmaMapGroup juniAtmPingTrapGroup juniAtmSubIfGroup juniAtmSubIfGroup2 juniAtmSubIfGroup3 juniAtmSubIfGroup4 juniAtmSubIfGroup5 juniAtmSubIfGroup6 juniAtmSubIfGroup7 juniAtmSvcGroup juniAtmSvcGroup2 juniAtmTrafficShapingGroup juniAtmVcPingControlGroup juniAtmVpPingControlGroup juniAtmVpStatsGroup juniAtmVpTunnelGroup
SNMPv2-CONF AGENT-CAPABILITIES
SNMPv2-SMI MODULE-IDENTITY
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-ATM-CONF' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-ATM-CONF::juniAtmAgent'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ATM-CONF' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ATM-CONF::juniAtmAgent'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (23)
juniAtmAgent
.1.3.6.1.4.1.4874.5.2.3
juniAtmVccEndPointAgent
.1.3.6.1.4.1.4874.5.2.3.1
juniAtmVccEndPointAgentV1 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.1
juniAtmVccEndPointAgentV10 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.10
juniAtmVccEndPointAgentV11 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.11
juniAtmVccEndPointAgentV12
.1.3.6.1.4.1.4874.5.2.3.1.12
juniAtmVccEndPointAgentV2 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.2
juniAtmVccEndPointAgentV3 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.3
juniAtmVccEndPointAgentV4 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.4
juniAtmVccEndPointAgentV5 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.5
juniAtmVccEndPointAgentV6 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.6
juniAtmVccEndPointAgentV7 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.7
juniAtmVccEndPointAgentV8 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.8
juniAtmVccEndPointAgentV9 obsolete
.1.3.6.1.4.1.4874.5.2.3.1.9
juniAtmVpTunnelAgent
.1.3.6.1.4.1.4874.5.2.3.2
juniAtmVpTunnelAgentV1
.1.3.6.1.4.1.4874.5.2.3.2.1
juniAtmNbmaAgent
.1.3.6.1.4.1.4874.5.2.3.3
juniAtmNbmaAgentV1
.1.3.6.1.4.1.4874.5.2.3.3.1
juniAtmSwitchAgent
.1.3.6.1.4.1.4874.5.2.3.4
juniAtmSwitchAgentV1
.1.3.6.1.4.1.4874.5.2.3.4.1
juniAtmSwitchAgentV2
.1.3.6.1.4.1.4874.5.2.3.4.2
juniAtmTrafficShapingAgent
.1.3.6.1.4.1.4874.5.2.3.5
juniAtmTrafficShapingAgentV1
.1.3.6.1.4.1.4874.5.2.3.5.1
Dependencies (20) 7 direct · 13 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ATM-TC-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. ATM-MIBrfc
  9. IANA-ENTITY-MIBrfc
  10. SNMP-FRAMEWORK-MIBrfc
  11. UUID-TC-MIBrfc
  12. ENTITY-MIBrfc
  13. HOST-RESOURCES-MIBrfc
  14. ATM-FORUM-SNMP-M4-MIBjunose
  15. ATM2-MIBrfc
  16. Juniper-UNI-SMIjunose
  17. Juniper-Agentsjunose
  18. Juniper-MIBsjunose
  19. Juniper-TCjunose
  20. Juniper-UNI-ATM-MIBjunose
  21. Juniper-ATM-CONFjunoseselected