Standard view Table view

JUNIPER-WX-EVENT-MIB

Source file
JUNIPER-WX-EVENT-MIB
Last revised
Not declared
Imported Objects
JUNIPER-WX-GLOBAL-MIB jnxWxGrpEvents
SNMPv2-SMI NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TC DisplayString
Objects (2)
jnxWxGrpEventV2
.1.3.6.1.4.1.2636.3.41.1.1.3.0
jnxWxGrpEventDescr
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.2636.3.41.1.1.3.1
Dependencies (4) 3 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. JUNIPER-SMIjuniper
  3. SNMPv2-TCrfc
  4. JUNIPER-WX-GLOBAL-MIBjuniper
  5. JUNIPER-WX-EVENT-MIBjuniperselected
Notifications / Traps (12)
NameOIDDescription
jnxWxGrpEventPowerSupplyFailure
.1.3.6.1.4.1.2636.3.41.1.1.3.0.1
One or more sources of power to the system have failed.
A redundant power-supply has presumably taken over.
jnxWxGrpEventInterfaceDuplexMismatch
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.10
A possible mismatch was detected between the duplex settings
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remote) is identified by the 'ifIndex' object.

Note that this notification is quite different from
jnxWxGrpEventInterfaceSpeedMismatch, which compares the
local and remote interfaces on the same WX device.
jnxWxGrpEventLoginFailure
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.11
A user's login attempt via the console/ssh/web server
failed due to incorrect username or password.
jnxWxGrpEventDiskFailure
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.12
A hard disk failed on the system. The system was rebooted,
and will now operate without the downed disk, at a degraded
performance. Dictionary accumulated until this point was lost.
jnxWxGrpEventPowerSupplyOk
.1.3.6.1.4.1.2636.3.41.1.1.3.0.2
One or more previously failed sources of power is now
working normally. The transition to normal condition happened
without the system having to be restarted.
jnxWxGrpEventLicenseWillExpire
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.3
The license for the system is about to
expire shortly. When it eventually does
expire, the system will switch over to
and stay in pass-through mode.
jnxWxGrpEventThruputLimitExceeded
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.4
The throughput of traffic through the device
has exceeded the limit for which it has
been licensed.
jnxWxGrpEventLicenseExpired
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.5
The license for the system expired.
As a result, the system will switch over to
and stay in pass-through mode.
jnxWxGrpEventClientLimitExceeded
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.6
Exceeded licensed maximum concurrent client connections.
Please contact Juniper Networks to obtain a new license
with higher number of concurrent client connections.
jnxWxGrpEventInFailSafeMode
.1.3.6.1.4.1.2636.3.41.1.1.3.0.7
This trap is sent when the device boots up in fail-safe mode.
This can happen for one of the following reasons:
Fail-safe reboot was explicitly initiated by the user.
The device rebooted automatically too many times because of
the failure of internal consistency checks or the failure of
tests that verify proper operation of the device.
jnxWxGrpEventInterfaceSpeedMismatch
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.8
A mismatch is detected between the local and remote
interface settings. This can happen due to a mismatch
in the local and remote interface speed or mode.
jnxWxGrpEventInterfaceSpeedOk
jnxWxGrpEventDescr
.1.3.6.1.4.1.2636.3.41.1.1.3.0.9
A mismatch previously detected between the local and remote
interface settings is now resolved. The local and remote
interface speed and mode are matched.