JUNIPER-PW-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
48
.1.3.6.1.4.1.2636.3.57.1.1 · 1 row entry · 4 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmCfgTable'
This table specifies generic information for an ATM PW
to be carried over PSN in any mode.
jnxpwAtmCfgEntry row .1.3.6.1.4.1.2636.3.57.1.1.1
This table contains a set of parameters for
the ATM PW that needs to be adapted and carried
over PSN. This table is indexed by pwIndex from
pwTable. An entry is created for every newly ATM
type associated pwIndex in the…
Column Syntax OID
jnxpwAtmCfgMaxCellConcatenationThe maximum number of ATM cells that can be
concatenated into one PW packet towards PSN.
In non LDP or other signaling protocol environment,
this object MAY be changed at anytime, but traffic
might be interuppted, other…
Unsigned32
Constraints:
range: 1-29
.1.3.6.1.4.1.2636.3.57.1.1.1.1
jnxpwAtmCfgFarEndMaxCellConcatenationThe maximum number of ATM cells that can be
concatenated into one PW packet towards PSN as reported by
the far end. If no LDP in use, the object will either
return value 0 or allow setting it for calculating
protocol ov…
Unsigned32
Constraints:
range: 1-29
.1.3.6.1.4.1.2636.3.57.1.1.1.2
jnxpwAtmCfgTimeoutModeThis objects determines whether a packet can be
transmitted to the PSN based on time out expiration
for collecting cells or not. The actual handling of the
time out is implementation specific-as such this object
may be …
Enumeration
Enumerated Values:
1notApplicable
2disabled
3enabled
.1.3.6.1.4.1.2636.3.57.1.1.1.3
jnxpwAtmClpQosMappingThis Object indicates whether the CLP bits should be
considered when setting the value in the Quality
of Service fields of the encapsulating protocol
(e.g. EXP fields of the MPLS Label Stack). Selecting
True allows the…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2636.3.57.1.1.1.4
.1.3.6.1.4.1.2636.3.57.1.2 · 1 row entry · 7 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmOutboundNto1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmOutboundNto1Table'
This table specifies the information for an ATM PW to
be carried over PSN in the outbound direction. Up to
N entries can be created in this table for every
entry in the pwTable with a pwType equal to:
atmCellNto1Vcc(9), or atmCellNto1Vpc(10).
  An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every
entry in the pwTable with a pwType equal to
one of the following: atmCell1to1Vcc(12), or
atmCell1to1Vpc(13), or atmAal5PduVcc(14), or
atmAal5SduVcc(2), or atmTransparent(3).
jnxpwAtmOutboundNto1Entry row .1.3.6.1.4.1.2636.3.57.1.2.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable and the ATM interface with VPL/ VCLs.
In atmTransparent(3), Vpi and VCi will be 0xFFF…
Column Syntax OID
jnxpwAtmOutboundNto1AtmIfThe ATM Interface that receives cells from the ATM network.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2636.3.57.1.2.1.1
jnxpwAtmOutboundNto1VpiVPI value of this ATM PW. In atmTransparent(3),
Vpi will be the equivalent of 0xFFFF
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.2636.3.57.1.2.1.2
jnxpwAtmOutboundNto1VciVCI value of this ATM PW. In atmTransparent(3), or
VP case, the value will be the equivalent of
0xFFFF
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2636.3.57.1.2.1.3
jnxpwAtmOutboundNto1RowStatusThis Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2636.3.57.1.2.1.4
jnxpwAtmOutboundNto1TrafficParamDescrThis object represents a pointer to a ATM traffic parameter
specific row in either private or standard table which will
be employed while receiving cells from the ATM network.
This table should contain a set
of self-con…
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.2636.3.57.1.2.1.5
jnxpwAtmOutboundNto1MappedVpiThe egress generated VPI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
equivalent of 0xFF…
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.2636.3.57.1.2.1.6
jnxpwAtmOutboundNto1MappedVciThe egress generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In VP case or other types, the
value will be the equivale…
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2636.3.57.1.2.1.7
.1.3.6.1.4.1.2636.3.57.1.3 · 1 row entry · 7 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmInboundNto1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmInboundNto1Table'
This table specifies the information for an ATM PW to
be carried over PSN in the Inbound direction. Up to
N entries can be created in this table for every
entry in the pwTable with a pwType equal to:
atmCellNto1Vcc(9), or atmCellNto1Vpc(10).
  An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every
entry in the pwTable with a pwType equal to
one of the following:atmCell1to1Vcc(12), or
atmCell1to1Vpc(13), or atmAal5PduVcc(14), or
atmAal5SduVcc(2), or atmTransparent(3).
jnxpwAtmInboundNto1Entry row .1.3.6.1.4.1.2636.3.57.1.3.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable and the ATM interface with VPL/ VCLs.
In atmTransparent(3), Vpi and VCi will be 0xFFF…
Column Syntax OID
jnxpwAtmInboundNto1AtmIfThe ATM Interface that receives cells from the ATM network.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2636.3.57.1.3.1.1
jnxpwAtmInboundNto1VpiVPI value of this ATM PW. In atmTransparent(3),
Vpi will be the equivalent of 0xFFFF.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.2636.3.57.1.3.1.2
jnxpwAtmInboundNto1VciVCI value of this ATM PW. In atmTransparent(3), or
VP case, the value will be the equivalent of
0xFFFF
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2636.3.57.1.3.1.3
jnxpwAtmInboundNto1RowStatusThis Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2636.3.57.1.3.1.4
jnxpwAtmInboundNto1TrafficParamDescrThis object represents a pointer to a ATM traffic parameter
specific row in either private or standard table which will
be employed while receiving cells from the ATM network.
This table should contain a set
of self-con…
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.2636.3.57.1.3.1.5
jnxpwAtmInboundNto1MappedVpiThe generated VPI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
equivalent of 0xFFFF. Val…
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.2636.3.57.1.3.1.6
jnxpwAtmInboundNto1MappedVciThe generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In VP case or other types, the
value will be the equivalent of 0…
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2636.3.57.1.3.1.7
.1.3.6.1.4.1.2636.3.57.1.4 · 1 row entry · 8 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmPerfCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmPerfCurrentTable'
The current 15 minute interval counts are in
this table.
This table provides performance information per ATM PW.
jnxpwAtmPerfCurrentEntry row .1.3.6.1.4.1.2636.3.57.1.4.1
An entry in this table is created by the agent for every
pwAtmCfgTable entry. After 15 minutes, the contents of this
table entry are copied to a new entry in the
pwAtmPerfInterval table and the counts in this entry
are …
Column Syntax OID
jnxpwAtmPerfCurrentMissingPktsNumber of missing packets (as detected via control word
sequence number gaps).
PerfHist-TC-MIBPerfCurrentCount.1.3.6.1.4.1.2636.3.57.1.4.1.1
jnxpwAtmPerfCurrentPktsReOrderNumber of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this Feature.
PerfHist-TC-MIBPerfCurrentCount.1.3.6.1.4.1.2636.3.57.1.4.1.2
jnxpwAtmPerfCurrentPktsMisOrderNumber of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfCurrentCount.1.3.6.1.4.1.2636.3.57.1.4.1.3
jnxpwAtmPerfCurrentPktsTimeoutNumber of packets transmitted due to timeout expiration
while attempting to collect cells.
PerfHist-TC-MIBPerfCurrentCount.1.3.6.1.4.1.2636.3.57.1.4.1.4
jnxpwAtmPerfCurrentPktsXmitNumber of transmitted packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.4.1.5
jnxpwAtmPerfCurrentCellsDroppedNumber of dropped cells.PerfHist-TC-MIBPerfCurrentCount.1.3.6.1.4.1.2636.3.57.1.4.1.6
jnxpwAtmPerfCurrentPktsReceivedNumber of received packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.4.1.7
jnxpwAtmPerfCurrentUnknownCellsNumber of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.4.1.8
.1.3.6.1.4.1.2636.3.57.1.5 · 1 row entry · 11 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmPerfIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmPerfIntervalTable'
This table provides performance information per ATM PW
similar to the pwAtmPerfCurrentTable above. However,
these counts represent historical 15 minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24 hour period.
jnxpwAtmPerfIntervalEntry row .1.3.6.1.4.1.2636.3.57.1.5.1
An entry in this table is created by the agent for
every pwAtmPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry, then resets its counts
to zer…
Column Syntax OID
jnxpwAtmPerfIntervalNumberA number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, …
Unsigned32
Constraints:
range: 1-96
.1.3.6.1.4.1.2636.3.57.1.5.1.1
jnxpwAtmPerfIntervalValidDataThis variable indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2636.3.57.1.5.1.2
jnxpwAtmPerfIntervalDurationThe duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.5.1.3
jnxpwAtmPerfIntervalMissingPktsNumber of missing packets (as detected via control
word sequence number gaps).
PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.2636.3.57.1.5.1.4
jnxpwAtmPerfIntervalPktsReOrderNumber of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
Feature.
PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.2636.3.57.1.5.1.5
jnxpwAtmPerfIntervalPktsMisOrderNumber of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.2636.3.57.1.5.1.6
jnxpwAtmPerfIntervalPktsTimeoutNumber of packets transmitted due to timeout expiration.PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.2636.3.57.1.5.1.7
jnxpwAtmPerfIntervalPktsXmitNumber of transmitted packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.5.1.8
jnxpwAtmPerfIntervalCellsDroppedNumber of dropped cells.PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.2636.3.57.1.5.1.9
jnxpwAtmPerfIntervalPktsReceivedNumber of received packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.5.1.10
jnxpwAtmPerfIntervalUnknownCellsNumber of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.5.1.11
.1.3.6.1.4.1.2636.3.57.1.6 · 1 row entry · 11 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxpwAtmPerf1DayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PW-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PW-ATM-MIB::jnxpwAtmPerf1DayIntervalTable'
This table provides performance information per ATM PW
similar to the pwAtmPerfIntervalTable above. However,
these counters represent historical 1 day intervals up to
one full month.
jnxpwAtmPerf1DayIntervalEntry row .1.3.6.1.4.1.2636.3.57.1.6.1
An entry is created in this table by the agent
for every entry in the pwAtmCfgTable table.
Column Syntax OID
jnxpwAtmPerf1DayIntervalNumberThe number of interval, where 1 indicates current day
measured period and 2 and above indicate previous days
respectively
Unsigned32
Constraints:
range: 1-365
.1.3.6.1.4.1.2636.3.57.1.6.1.1
jnxpwAtmPerf1DayIntervalValidDataThis object indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2636.3.57.1.6.1.2
jnxpwAtmPerf1DayIntervalDurationThe duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.3
jnxpwAtmPerf1DayIntervalMissingPktsNumber of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.4
jnxpwAtmPerf1DayIntervalPktsReOrderNumber of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
feature.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.5
jnxpwAtmPerf1DayIntervalPktsMisOrderNumber of packets detected out of order(via control word
sequence numbers), and could not be re-ordered.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.6
jnxpwAtmPerf1DayIntervalPktsTimeoutNumber of packets transmitted due to timeout expiration.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.7
jnxpwAtmPerf1DayIntervalPktsXmitNumber of transmitted packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.6.1.8
jnxpwAtmPerf1DayIntervalCellsDroppedNumber of dropped cells.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.57.1.6.1.9
jnxpwAtmPerf1DayIntervalPktsReceivedNumber of received packets.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.6.1.10
jnxpwAtmPerf1DayIntervalUnknownCellsNumber of cells received from the PSN with unknown VPI
or VCI value. This object is relevant only in N:1 mode.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.57.1.6.1.11