JUNIPER-PFE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
34
.1.3.6.1.4.1.2636.3.44.1.1.1 · 1 row entry · 20 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPfeNotifyGlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PFE-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PFE-MIB::jnxPfeNotifyGlTable'
This table provides global PFE notification statistics.
jnxPfeNotifyGlEntry row .1.3.6.1.4.1.2636.3.44.1.1.1.1
Column Syntax OID
The PFE slot number for this set of global PFE notification
statistics.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2636.3.44.1.1.1.1.1
Count of notifications reported by the routing chip.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.2
Count of notifications that are dropped due to the fact
that the they have been in the system for too long and
hence not valid anymore.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.3
Count of notifications dropped due to the fact that they
have an invalid notification result format. This counter
is valid for Internet Processor-I and Internet Processor-II
only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.4
Count of notifications dropped due to the fact that they
have an illegal notification type.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.5
Count of sample notifications reported by the routing chip.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.6
Count of notifications dropped that are larger than the
supported DMA size.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.7
Count of options/TTL-expired notifications that need to be
sent to service interfaces as transit packets. This counter
is valid for Internet Processor-I and Internet Processor-II
only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.8
Count of options/TTL-expired packet notifications that could
not be sent as transit packets because the output interface
could not be determined. This counter is valid for Internet
Processor-I and Internet Processor…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.9
Count of IP options packets that are sent out to a Services
PIC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.10
Count of IP options packets that are sent out to the Routing
Engine.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.11
Count of notifications that were re-injected by the services
PIC after it had processed the associated packets. These
notifications now need to be forwarded out to their actual
destination. This counter is valid fo…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.12
Count of TTL-expired transit packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.13
Count of sample notifications that are dropped as they refer
to discarded packets in PFE.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.14
Count of notifications ignored because of PFE software
throttling.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.15
Count of notifications where we could not allocate memory
for DMA.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.16
Count of notifications where the DMA of associated packets
failed for miscellaneous reasons. Valid for T-series Internet
Processor only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.17
Count of notifications for which the packet DMA completed.
Valid for T-series Internet Processor only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.18
Count of notifications that could not be resolved to a known
next hop destination. Valid for T-series Internet Processor
only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.19
Count of notifications for the packets parsed/processed by
access-security.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.1.1.20
.1.3.6.1.4.1.2636.3.44.1.1.2 · 1 row entry · 6 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPfeNotifyTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PFE-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PFE-MIB::jnxPfeNotifyTypeTable'
This provides type-specific PFE notification stats
jnxPfeNotifyTypeEntry row .1.3.6.1.4.1.2636.3.44.1.1.2.1
Column Syntax OID
This identifies the PFE notification type for this row's stats.
Below is a description of each notification type:
1. illegal Packets with invalid notification type.

2. unclassified Packet…
Enumeration
Enumerated Values:
1illegal
2unclassified
3option
4nextHop
5discard
6sample
7redirect
8dontFragment
9cfdf
10poison
11unknown
12specialMemPkt
13autoConfig
14reject
.1.3.6.1.4.1.2636.3.44.1.1.2.1.1
The description of the Pfe Notification type for this entry.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.2636.3.44.1.1.2.1.2
Count of successful parsing of notifications.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.2.1.3
Count of notifications whose associated packets were DMA'ed
into route processor memory.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.2.1.4
Count of failures in parsing the notifications.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.2.1.5
Count of notifications where the notification type in the
message does not match any of the valid types.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.3.44.1.1.2.1.6
.1.3.6.1.4.1.2636.3.44.1.1.3 · 1 row entry · 4 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPfeMemoryErrorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PFE-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PFE-MIB::jnxPfeMemoryErrorsTable'
This provides PFE memory errors
jnxPfeMemoryErrorsEntry row .1.3.6.1.4.1.2636.3.44.1.1.3.1
Column Syntax OID
The FPC slot number for this set of PFE notification
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2636.3.44.1.1.3.1.1
The pfe slot number for this set of errors
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2636.3.44.1.1.3.1.2
The parity error count
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.44.1.1.3.1.3
The ECC error count
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2636.3.44.1.1.3.1.4
.1.3.6.1.4.1.2636.3.44.1.2.1 · 1 row entry · 1 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPfeMemoryUkernTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PFE-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PFE-MIB::jnxPfeMemoryUkernTable'
This table provides global PFE ukern memory statistics for
specified slot.
jnxPfeMemoryUkernEntry row .1.3.6.1.4.1.2636.3.44.1.2.1.1
Entry represent ukern memory percentage free.
Indexes
Column Syntax OID
The percent PFE ukern memory free within ukern heap.
percentUnsigned32
Constraints:
range: 0-100
.1.3.6.1.4.1.2636.3.44.1.2.1.1.2
.1.3.6.1.4.1.2636.3.44.1.2.2 · 1 row entry · 3 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPfeMemoryForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-PFE-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-PFE-MIB::jnxPfeMemoryForwardingTable'
This table provides PFE ASIC memory - NH/JTREE or FW/Filter or Encap 
memory utilization statistics.
jnxPfeMemoryForwardingEntry row .1.3.6.1.4.1.2636.3.44.1.2.2.1
Entry represent ASIC memory free percent of a specific type
in specified pfe instance
Column Syntax OID
ASIC instance number or pfe complex instance number.
Unsigned32
Constraints:
range: 0-3
.1.3.6.1.4.1.2636.3.44.1.2.2.1.1
PFE ASIC memory type, nh = 1, fw = 2, encap = 3.
JnxPfeMemoryTypeEnum
Type Values:
1nh
2fw
3encap
.1.3.6.1.4.1.2636.3.44.1.2.2.1.2
Percentage ASIC memory free for a specific memory type. For Trio based linecards Encap memory is not available.Hence no value is returned
percentUnsigned32
Constraints:
range: 0-100
.1.3.6.1.4.1.2636.3.44.1.2.2.1.3