JNX-OPT-IF-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
17
Rows
17
Columns
183
jnxoptIfOPSmConfigTable
table.1.3.6.1.4.1.2636.3.73.1.3.1.1
·
1 row entry
·
3 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOPSmConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOPSmConfigTable'
A table of OPS General config parameters.
An conceptual row of OPS General config parameters.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Indicates the directionality of the entity.
|
JNX-OPT-IF-MIBJnxoptIfDirectionality Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.1 |
||||||||||||
|
Fiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657. |
JnxoptIfFiberTypeRecommendation Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.2 |
||||||||||||
|
Fiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, and G.655. The categories are A, B, C, D and E. |
JnxoptIfFiberTypeCategory Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.3 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1
·
1 row entry
·
14 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOChConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOChConfigExtTable'
A table of Och General config extension parameters
A conceptual row that contains OCh configuration extension
information of an interface.
information of an interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A minimum nominal difference in frequency (GHz) between two adjacent
channels. |
JnxoptIfChannelSpacing Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.1 |
||||||||||||||
|
Optical tributary signal class
NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) NRZ 10G (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s) |
JnxoptIfBitRateLineCoding Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.2 |
||||||||||||||
|
This parameter indicates what Forward Error Correction (FEC) code
is used at Source and Sink. GFEC (from G709) and the I.x EFEC's (G.975 - Table I.1 super FEC). 1 - No FEC 2 - GFEC 3 - I.2 EFEC 4 - I.3 EFEC 5 … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.3 |
||||||||||||||
|
This parameter indicate the maximum Bit(mantissa) error rate can be
supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 |
||||||||||||||
|
This parameter indicate the maximum Bit(exponent) error rate can be
supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.5 |
||||||||||||||
|
This parameter indicate minimum wavelength spectrum in a
definite wavelength Band (L, C and S) |
0.01 nmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.6 |
||||||||||||||
|
This parameter indicate maximum wavelength spectrum in a
definite wavelength Band (L, C and S) |
0.01 nmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.7 |
||||||||||||||
|
This parameter indicates the wavelength value.
|
0.01 nmSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.8 |
||||||||||||||
|
As defined in G.698
Vendors can summarize a set of parameters in a single proprietary parameter: the Class of transceiver. The Transceiver classification will be based on the Vendor Name and the main TX and RX paramete… |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.9 |
||||||||||||||
|
This parameter indicates the transceiver application code at Ss
and Rs as defined in [ITU.G698.2] Chapter 5.3 |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.10 |
||||||||||||||
|
The configured State of the laser:
0 - disabled 1 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.11 |
||||||||||||||
|
The Operational Status of Laser:
0 - disabled 1 - Enabled 2 - fault 3 - degraded |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.12 |
||||||||||||||
|
The Administrative Status of an Interface:
0 - Out of Service 1 - In Service |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.13 |
||||||||||||||
|
The Operational Status of an Interface:
0 - disabled 1 - enabled 2 - Fault 3 - Degraded |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2
·
1 row entry
·
6 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOChSrcConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcConfigTable'
A configuration table of OCh Src (Ss) parameters.
A conceptual row that contains the Src (Ss) configuration
parameters for a given interface.
parameters for a given interface.
| Column | Syntax | OID |
|---|---|---|
|
The minimum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link. |
0.01 dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.1 |
|
The maximum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link. |
0.01 dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.2 |
|
The minimum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be repre… |
0.01 THzSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.3 |
|
The maximum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be repre… |
0.01 THzSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.4 |
|
This is the maximum acceptable difference between the nominal
central frequency (in GHz) of the channel and the minus 15 dB points of the transmitter spectrum furthest from the nominal central frequency measured at poin… |
0.1 GHzSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.5 |
|
Defines a reference receiver that this penalty is measured with.
Lowest OSNR at Ss with worst case (residual) dispersion minus the Lowest OSNR at Ss with no dispersion. Lowest OSNR at Ss with no dispersion |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.6 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3
·
1 row entry
·
9 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOChSrcSinkConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcSinkConfigTable'
A table of paramters for the optical path from Src to Sink (Ss to Rs).
A conceptual row that contains the optical path Src-Sink (Ss-Rs)
configuration parameters for a given interface.
configuration parameters for a given interface.
| Column | Syntax | OID |
|---|---|---|
|
These parameters define the minimum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
ps/nmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1 |
|
These parameters define the maximum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
ps/nmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2 |
|
These parameter defines minimum optical return loss (in dB) of the
cable plant at the source reference point (Src/Ss), including any connectors. |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3 |
|
Optical reflectance is defined to be the ratio of the reflected
optical power pre.sent at a point, to the optical power incident to that point. Control of reflections is discussed extensively in ITU-T Rec. G.957. |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4 |
|
Differential group delay (DGD) is the time difference between the
fractions of a pulse that are transmitted in the two principal states of polarization of an optical signal. For distances greater than several kilometre… |
psSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5 |
|
The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of pol… |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6 |
|
Inter-channel crosstalk is defined as the ratio of total power in
all of the disturbing channels to that in the wanted channel, where the wanted and disturbing channels are at different wavelengths. The parameter speci… |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 |
|
This parameter places a requirement on the isolation of a link
conforming to the 'black-link' approach such that under the worst case operating conditions the interferometric crosstalk at any reference point RS is less … |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8 |
|
The optical path OSNR penalty is defined as the difference between
the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER requirement. |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4
·
1 row entry
·
4 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOChSinkConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkConfigTable'
A table of OCh Sink (Rs) configuration parameters.
A conceptual row that contains the Sink (Rs) configuration
parameters for a given interface.
parameters for a given interface.
| Column | Syntax | OID |
|---|---|---|
|
The minimum values of the average received power (in dbm
at point the Sink (Rs). |
0.01 dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.1 |
|
The maximum values of the average received power (in dbm)
at point the Sink (Rs). |
0.01 dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.2 |
|
The minimum optical signal-to-noise ratio (OSNR) is the minimum
value of the ratio of the signal power in the wanted channel to the highest noise power density in the range of the central frequency plus and minus the ma… |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.3 |
|
The receiver OSNR tolerance is defined as the minimum value of
OSNR at point Sink (Rs) that can be tolerated while maintaining the maximum BER of the application. Sink (Rs). |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.4 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1
·
1 row entry
·
3 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOChSinkCurrentExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkCurrentExtTable'
A table of OCh sink etxension to the performance monitoring information for the current 15-minute interval.
A conceptual row that contains OCh sink performance
monitoring information for an interface for the current
15-minute interval.
monitoring information for an interface for the current
15-minute interval.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
Residual Chromatic Dispersion measured at Rx Transceiver port.
|
ps/nmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.1 |
|
Current Optical Signal to Noise Ratio (OSNR) estimated at Rx
Transceiver port . |
0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.2 |
|
'Q' factor estimated at Rx Transceiver port.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.3 |
jnxoptIfOTNPMConfigTable
table.1.3.6.1.4.1.2636.3.73.1.3.3.2
·
1 row entry
·
21 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMConfigTable'
A table of performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer.
A conceptual entry in the performance monitoring configuration
for the type 'jnxoptIfOTNPMConfigLayer' layer.
for the type 'jnxoptIfOTNPMConfigLayer' layer.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.1 |
||||||
|
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.2 |
||||||
|
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.3 |
||||||
|
This parameter indicates the measurement interval
for error seconds ratio. |
secondsUnsigned32r/w Constraints: range: 1-96 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.4 |
||||||
|
This parameter indicates the measurement interval
for severely error seconds ratio. |
secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.5 |
||||||
|
The number of contiguous 15 minute intervals for which valid
PM data is available for the particular interface. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.6 |
||||||
|
The number of Bip8 encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.7 |
||||||
|
The number of ES encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshEsTCA. One notification will be sent per interval per … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.8 |
||||||
|
The number of SES encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshSESTCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.9 |
||||||
|
The number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshUASTCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.10 |
||||||
|
The number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBBETCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.11 |
||||||
|
The number of Bip8 encountered by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval per… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.12 |
||||||
|
The number of ES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshEsTCA. One notification will be sent per 24 hour per int… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.13 |
||||||
|
The number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshSESsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.14 |
||||||
|
The number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshUASsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.15 |
||||||
|
The number of BBE encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshBBEsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.16 |
||||||
|
Enable TCA's - 15minute and 24hr for Bip8
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.17 |
||||||
|
Enable TCA's - 15minute and 24hr for ESs
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.18 |
||||||
|
Enable TCA's - 15minute and 24hr for SESs
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.19 |
||||||
|
Enable TCA's - 15minute and 24hr for UASs
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.20 |
||||||
|
Enable TCA's - 15minute and 24hr for BBEs
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.21 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3
·
1 row entry
·
14 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMCurrentTable'
A table for the Performance monitoring Current Table.
A conceptual entry in the Near end or Far End performance monitoring
Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer.
Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the Near
End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1 |
||||||
|
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk (OCh which is used for the black link) 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link… |
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2 |
||||||
|
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3 |
||||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4 |
||||||
|
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5 |
||||||
|
This is the number of seconds in which one or more bits are in
error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6 |
||||||
|
The number of seconds which have a severe error.
This is the number of seconds in which the bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7 |
||||||
|
It is the number of unavailable seconds.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8 |
||||||
|
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9 |
||||||
|
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10 |
||||||
|
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11 |
||||||
|
The ratio of BER in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12 |
||||||
|
Time elapsed for this 15 minute interval
|
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13 |
||||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4
·
1 row entry
·
15 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMIntervalTable'
A Performance monitoring Interval Table.
A conceptual entry in the Near end or Far End performance monitoring
Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer.
Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1 |
||||||
|
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a co… |
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2 |
||||||
|
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3 |
||||||
|
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
Unsigned32 Constraints: range: 1-96 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4 |
||||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5 |
||||||
|
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6 |
||||||
|
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7 |
||||||
|
The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8 |
||||||
|
It is the number of unavailable seconds in this 15 minute interval.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A ne… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9 |
||||||
|
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10 |
||||||
|
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11 |
||||||
|
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12 |
||||||
|
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13 |
||||||
|
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14 |
||||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5
·
1 row entry
·
14 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMCurrentDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMCurrentDayTable'
A Performance monitoring Current Day Table.
A conceptual entry in the Near end or Far End performance
monitoring Current day table for the type
'jnxoptIfOTNPMCurrentDayLayer' layer.
monitoring Current day table for the type
'jnxoptIfOTNPMCurrentDayLayer' layer.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for
the Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1 |
||||||
|
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2 |
||||||
|
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3 |
||||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4 |
||||||
|
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5 |
||||||
|
The number of seconds which have an error.
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6 |
||||||
|
The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7 |
||||||
|
It is the number of unavailable seconds in the cunrrent day.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new perio… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8 |
||||||
|
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9 |
||||||
|
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10 |
||||||
|
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11 |
||||||
|
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12 |
||||||
|
Time elapsed for current day
|
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13 |
||||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more inter… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6
·
1 row entry
·
14 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMPrevDayTable'
A Performance monitoring Previous Day Table.
A conceptual entry in the Near end or Far End performance
monitoring previous day table for the type
'jnxoptIfOTNPMPrevDayLayer' layer.
monitoring previous day table for the type
'jnxoptIfOTNPMPrevDayLayer' layer.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1 |
||||||
|
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2 |
||||||
|
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3 |
||||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4 |
||||||
|
Number of pre FEC failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5 |
||||||
|
The number of seconds which have an error.
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6 |
||||||
|
The number of seconds which have a severe error.
A severely errored second, is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detec… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7 |
||||||
|
It is the number of unavailable seconds in the previous day.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new perio… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8 |
||||||
|
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9 |
||||||
|
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10 |
||||||
|
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11 |
||||||
|
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12 |
||||||
|
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13 |
||||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7
·
1 row entry
·
7 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMFECConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECConfigTable'
A table of performance monitoring FEC configuration.
A conceptual entry in the performance monitoring FEC configuration
layer.
layer.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.1 |
||||
|
The number of contiguous 15 minute intervals for which valid FEC
PM data is available for the particular interface. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.2 |
||||
|
BER (mantissa) by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interfa… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.3 |
||||
|
The Pre FEC BER (exponent) by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.4 |
||||
|
BER (mantissa) by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.5 |
||||
|
The Pre FEC BER (exponent) by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.6 |
||||
|
Enable TCA's - 15minute and 24hr for FEC BER
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.7 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8
·
1 row entry
·
14 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMFECCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECCurrentTable'
A Performance monitoring FEC Current Table.
A conceptual entry in the Near end or Far End performance
monitoring FEC current table.
monitoring FEC current table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.1 |
||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.2 |
||||
|
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.3 |
||||
|
The number of un-corrected words by the FEC are counted over the
interval. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.4 |
||||
|
The number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5 |
||||
|
The number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.6 |
||||
|
The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.7 |
||||
|
The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.8 |
||||
|
The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.9 |
||||
|
The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.10 |
||||
|
The average number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.11 |
||||
|
The average number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.12 |
||||
|
Time elapsed for this 15 minute interval.
|
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.13 |
||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9
·
1 row entry
·
13 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMFECIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECIntervalTable'
A Performance monitoring FEC Interval Table.
A conceptual entry in the Near end or Far End performance
monitoring FEC interval table.
monitoring FEC interval table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.1 |
||||
|
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.2 |
||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.3 |
||||
|
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.4 |
||||
|
The number of words un-corrected words by the FEC are counted over
the interval. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.5 |
||||
|
The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.6 |
||||
|
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.7 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.8 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.9 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.10 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.11 |
||||
|
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.12 |
||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.13 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10
·
1 row entry
·
12 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMFECCurrentDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECCurrentDayTable'
A Performance monitoring FEC current day table.
A conceptual entry in the Near end or Far End performance
monitoring FEC current day table.
monitoring FEC current day table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.1 |
||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.2 |
||||
|
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.3 |
||||
|
The number of words un-corrected by the FEC are counted over the
Day. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.4 |
||||
|
The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.5 |
||||
|
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.6 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.7 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.8 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.9 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.10 |
||||
|
Time elapsed for current day.
|
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.11 |
||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.12 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11
·
1 row entry
·
12 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNPMFECPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECPrevDayTable'
A Performance monitoring FEC previous day table.
A conceptual entry in the Near end or Far End performance
monitoring FEC previous day table.
monitoring FEC previous day table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 |
||||
|
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2 |
||||
|
The number of bits corrected by the FEC are counted in the
previous day. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3 |
||||
|
The number of un-corrected words by the FEC are counted over the
previous Day. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5 |
||||
|
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period (mantissa). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7 |
||||
|
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 24hour period (mantissa). |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9 |
||||
|
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the previous 24hour period. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10 |
||||
|
Time stamp for the Prev day.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11 |
||||
|
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12 |
jnxoptIfOTNAlarmTable
table.1.3.6.1.4.1.2636.3.73.1.3.4.1
·
1 row entry
·
8 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxoptIfOTNAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-EXT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-EXT-MIB::jnxoptIfOTNAlarmTable'
A table of alarm entries.
A conceptual entry in the alarm table.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The object identifies indicates if this entry was for
Near end/Far end. |
JnxoptIfOTNType Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The object identifies indicates if this entry was for
for the Tx/Rx or both. |
JnxoptIfOTNDirection Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This specifies which sublayer this alarm is for.
|
JnxoptIfOTNLayer Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TCM level 1-6 of the alarm. It will be 0 if alarm sublayer is
OCh, OTUk or ODUk. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for OCh/OTUk . |
JnxoptIfOTNOChAlarms Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The object identifies the severity of the last alarm/alert
that most recently was set or cleared. |
JnxoptIfOTNAlarmSeverity Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This specifies the date and time when this alarm occurred.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for ODUk/TCM . |
JnxoptIfOTNODUkTcmAlarms Type Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.8 |