IPSEC-POLICY-MIB
The MIB module for defining IPsec Policy filters and actions.
Copyright (C) The Internet Society (2003). This version of this
MIB module is part of RFC XXXX, see the RFC itself for full
legal notices.
- Source file
IPSEC-POLICY-MIB- Last revised
- Identity
ipspMIB- Base OID
1.3.6.1.2.1.153
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| IPSEC-ISAKMP-IKE-DOI-TC | IkeAuthMethod IkeEncryptionAlgorithm IkeGroupDescription IkeHashAlgorithm IpsecDoiAuthAlgorithm IpsecDoiEncapsulationMode IpsecDoiEspTransform IpsecDoiIdentType IpsecDoiIpcompTransform IpsecDoiSecProtocolId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | experimental Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue VariablePointer |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IPSEC-POLICY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IPSEC-POLICY-MIB::ipspMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPSEC-POLICY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPSEC-POLICY-MIB::ipspMIB'
Objects (381)
Showing 381 of 381 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.153 |
||
.1.3.6.1.2.1.153.1 |
||
.1.3.6.1.2.1.153.1.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.1.1 |
|
.1.3.6.1.2.1.153.1.10 |
||
.1.3.6.1.2.1.153.1.10.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.10.1.1 |
|
.1.3.6.1.2.1.153.1.10.1.10 |
||
.1.3.6.1.2.1.153.1.10.1.11 |
||
.1.3.6.1.2.1.153.1.10.1.2 |
||
.1.3.6.1.2.1.153.1.10.1.3 |
||
|
Bits
|
.1.3.6.1.2.1.153.1.10.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.10.1.5 |
|
|
Bits
|
.1.3.6.1.2.1.153.1.10.1.6 |
|
.1.3.6.1.2.1.153.1.10.1.7 |
||
.1.3.6.1.2.1.153.1.10.1.8 |
||
.1.3.6.1.2.1.153.1.10.1.9 |
||
.1.3.6.1.2.1.153.1.11 |
||
.1.3.6.1.2.1.153.1.11.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.11.1.1 |
|
|
Bits
|
.1.3.6.1.2.1.153.1.11.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.11.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.11.1.4 |
|
.1.3.6.1.2.1.153.1.11.1.5 |
||
.1.3.6.1.2.1.153.1.11.1.6 |
||
.1.3.6.1.2.1.153.1.11.1.7 |
||
.1.3.6.1.2.1.153.1.12 |
||
.1.3.6.1.2.1.153.1.12.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.12.1.1 |
|
.1.3.6.1.2.1.153.1.12.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.12.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.12.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.12.1.5 |
|
.1.3.6.1.2.1.153.1.12.1.6 |
||
.1.3.6.1.2.1.153.1.12.1.7 |
||
.1.3.6.1.2.1.153.1.12.1.8 |
||
.1.3.6.1.2.1.153.1.13 |
||
.1.3.6.1.2.1.153.1.13.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.13.1.1 |
|
.1.3.6.1.2.1.153.1.13.1.2 |
||
.1.3.6.1.2.1.153.1.13.1.3 |
||
.1.3.6.1.2.1.153.1.13.1.4 |
||
.1.3.6.1.2.1.153.1.13.1.5 |
||
.1.3.6.1.2.1.153.1.13.1.6 |
||
.1.3.6.1.2.1.153.1.14 |
||
.1.3.6.1.2.1.153.1.14.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.14.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.14.1.2 |
|
.1.3.6.1.2.1.153.1.14.1.3 |
||
.1.3.6.1.2.1.153.1.14.1.4 |
||
.1.3.6.1.2.1.153.1.14.1.5 |
||
.1.3.6.1.2.1.153.1.15 |
||
.1.3.6.1.2.1.153.1.15.1 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.15.1.1 |
|
.1.3.6.1.2.1.153.1.15.1.2 |
||
.1.3.6.1.2.1.153.1.15.1.3 |
||
.1.3.6.1.2.1.153.1.15.1.4 |
||
.1.3.6.1.2.1.153.1.15.1.5 |
||
.1.3.6.1.2.1.153.1.16 |
||
.1.3.6.1.2.1.153.1.16.1 |
||
.1.3.6.1.2.1.153.1.16.2 |
||
.1.3.6.1.2.1.153.1.16.3 |
||
.1.3.6.1.2.1.153.1.16.4 |
||
.1.3.6.1.2.1.153.1.16.5 |
||
.1.3.6.1.2.1.153.1.16.6 |
||
.1.3.6.1.2.1.153.1.17 |
||
.1.3.6.1.2.1.153.1.17.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.1 |
|
.1.3.6.1.2.1.153.1.17.1.10 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.11 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.12 |
|
.1.3.6.1.2.1.153.1.17.1.13 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.14 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.15 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.16 |
|
.1.3.6.1.2.1.153.1.17.1.17 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.18 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.17.1.19 |
|
.1.3.6.1.2.1.153.1.17.1.2 |
||
.1.3.6.1.2.1.153.1.17.1.20 |
||
.1.3.6.1.2.1.153.1.17.1.21 |
||
.1.3.6.1.2.1.153.1.17.1.22 |
||
.1.3.6.1.2.1.153.1.17.1.3 |
||
.1.3.6.1.2.1.153.1.17.1.4 |
||
.1.3.6.1.2.1.153.1.17.1.5 |
||
.1.3.6.1.2.1.153.1.17.1.6 |
||
.1.3.6.1.2.1.153.1.17.1.7 |
||
|
Enumeration
|
.1.3.6.1.2.1.153.1.17.1.8 |
|
.1.3.6.1.2.1.153.1.17.1.9 |
||
.1.3.6.1.2.1.153.1.18 |
||
.1.3.6.1.2.1.153.1.18.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.18.1.1 |
|
.1.3.6.1.2.1.153.1.18.1.2 |
||
.1.3.6.1.2.1.153.1.18.1.3 |
||
|
Unsigned32
|
.1.3.6.1.2.1.153.1.18.1.4 |
|
|
Unsigned32
|
.1.3.6.1.2.1.153.1.18.1.5 |
|
.1.3.6.1.2.1.153.1.18.1.6 |
||
.1.3.6.1.2.1.153.1.18.1.7 |
||
.1.3.6.1.2.1.153.1.18.1.8 |
||
.1.3.6.1.2.1.153.1.18.1.9 |
||
.1.3.6.1.2.1.153.1.19 |
||
.1.3.6.1.2.1.153.1.19.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.19.1.1 |
|
.1.3.6.1.2.1.153.1.19.1.10 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.19.1.11 |
|
.1.3.6.1.2.1.153.1.19.1.12 |
||
.1.3.6.1.2.1.153.1.19.1.13 |
||
.1.3.6.1.2.1.153.1.19.1.14 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.19.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.19.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.19.1.4 |
|
.1.3.6.1.2.1.153.1.19.1.5 |
||
.1.3.6.1.2.1.153.1.19.1.6 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.19.1.7 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.19.1.8 |
|
.1.3.6.1.2.1.153.1.19.1.9 |
||
.1.3.6.1.2.1.153.1.2 |
||
.1.3.6.1.2.1.153.1.2.1 |
||
.1.3.6.1.2.1.153.1.2.1.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.2.1.2 |
|
|
|
OctetString
|
.1.3.6.1.2.1.153.1.2.1.3 |
.1.3.6.1.2.1.153.1.2.1.4 |
||
.1.3.6.1.2.1.153.1.2.1.5 |
||
.1.3.6.1.2.1.153.1.2.1.6 |
||
.1.3.6.1.2.1.153.1.20 |
||
.1.3.6.1.2.1.153.1.20.1 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.20.1.1 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.20.1.2 |
|
.1.3.6.1.2.1.153.1.20.1.3 |
||
.1.3.6.1.2.1.153.1.20.1.4 |
||
.1.3.6.1.2.1.153.1.20.1.5 |
||
.1.3.6.1.2.1.153.1.21 |
||
.1.3.6.1.2.1.153.1.21.1 |
||
.1.3.6.1.2.1.153.1.21.1.1 |
||
.1.3.6.1.2.1.153.1.21.1.10 |
||
.1.3.6.1.2.1.153.1.21.1.11 |
||
.1.3.6.1.2.1.153.1.21.1.12 |
||
.1.3.6.1.2.1.153.1.21.1.13 |
||
.1.3.6.1.2.1.153.1.21.1.14 |
||
.1.3.6.1.2.1.153.1.21.1.2 |
||
.1.3.6.1.2.1.153.1.21.1.3 |
||
.1.3.6.1.2.1.153.1.21.1.4 |
||
.1.3.6.1.2.1.153.1.21.1.5 |
||
|
Enumeration
|
.1.3.6.1.2.1.153.1.21.1.6 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.21.1.7 |
|
.1.3.6.1.2.1.153.1.21.1.8 |
||
.1.3.6.1.2.1.153.1.21.1.9 |
||
.1.3.6.1.2.1.153.1.22 |
||
.1.3.6.1.2.1.153.1.22.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.22.1.1 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.22.1.10 |
|
Enumeration
|
.1.3.6.1.2.1.153.1.22.1.11 |
|
.1.3.6.1.2.1.153.1.22.1.12 |
||
.1.3.6.1.2.1.153.1.22.1.13 |
||
.1.3.6.1.2.1.153.1.22.1.14 |
||
.1.3.6.1.2.1.153.1.22.1.15 |
||
.1.3.6.1.2.1.153.1.22.1.16 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.22.1.2 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.22.1.3 |
|
.1.3.6.1.2.1.153.1.22.1.4 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.22.1.5 |
|
.1.3.6.1.2.1.153.1.22.1.6 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.22.1.7 |
|
.1.3.6.1.2.1.153.1.22.1.8 |
||
|
Enumeration
|
.1.3.6.1.2.1.153.1.22.1.9 |
|
.1.3.6.1.2.1.153.1.23 |
||
.1.3.6.1.2.1.153.1.23.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.23.1.1 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.23.1.2 |
|
.1.3.6.1.2.1.153.1.23.1.3 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.23.1.4 |
|
.1.3.6.1.2.1.153.1.23.1.5 |
||
.1.3.6.1.2.1.153.1.23.1.6 |
||
.1.3.6.1.2.1.153.1.23.1.7 |
||
.1.3.6.1.2.1.153.1.24 |
||
.1.3.6.1.2.1.153.1.24.1 |
||
.1.3.6.1.2.1.153.1.24.1.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.24.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.24.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.24.1.4 |
|
.1.3.6.1.2.1.153.1.24.1.5 |
||
.1.3.6.1.2.1.153.1.24.1.6 |
||
.1.3.6.1.2.1.153.1.24.1.7 |
||
.1.3.6.1.2.1.153.1.25 |
||
.1.3.6.1.2.1.153.1.25.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.25.1.1 |
|
.1.3.6.1.2.1.153.1.25.1.2 |
||
.1.3.6.1.2.1.153.1.25.1.3 |
||
.1.3.6.1.2.1.153.1.25.1.4 |
||
.1.3.6.1.2.1.153.1.25.1.5 |
||
.1.3.6.1.2.1.153.1.25.1.6 |
||
.1.3.6.1.2.1.153.1.25.1.7 |
||
.1.3.6.1.2.1.153.1.25.1.8 |
||
.1.3.6.1.2.1.153.1.25.1.9 |
||
.1.3.6.1.2.1.153.1.26 |
||
.1.3.6.1.2.1.153.1.26.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.26.1.1 |
|
.1.3.6.1.2.1.153.1.26.1.10 |
||
.1.3.6.1.2.1.153.1.26.1.11 |
||
.1.3.6.1.2.1.153.1.26.1.12 |
||
.1.3.6.1.2.1.153.1.26.1.2 |
||
.1.3.6.1.2.1.153.1.26.1.3 |
||
.1.3.6.1.2.1.153.1.26.1.4 |
||
.1.3.6.1.2.1.153.1.26.1.5 |
||
.1.3.6.1.2.1.153.1.26.1.6 |
||
.1.3.6.1.2.1.153.1.26.1.7 |
||
.1.3.6.1.2.1.153.1.26.1.8 |
||
.1.3.6.1.2.1.153.1.26.1.9 |
||
.1.3.6.1.2.1.153.1.27 |
||
.1.3.6.1.2.1.153.1.27.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.27.1.1 |
|
.1.3.6.1.2.1.153.1.27.1.2 |
||
.1.3.6.1.2.1.153.1.27.1.3 |
||
.1.3.6.1.2.1.153.1.27.1.4 |
||
.1.3.6.1.2.1.153.1.27.1.5 |
||
.1.3.6.1.2.1.153.1.27.1.6 |
||
.1.3.6.1.2.1.153.1.27.1.7 |
||
.1.3.6.1.2.1.153.1.27.1.8 |
||
.1.3.6.1.2.1.153.1.27.1.9 |
||
.1.3.6.1.2.1.153.1.28 |
||
.1.3.6.1.2.1.153.1.28.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.28.1.1 |
|
.1.3.6.1.2.1.153.1.28.1.2 |
||
.1.3.6.1.2.1.153.1.28.1.3 |
||
.1.3.6.1.2.1.153.1.28.1.4 |
||
.1.3.6.1.2.1.153.1.29 |
||
.1.3.6.1.2.1.153.1.29.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.29.1.1 |
|
.1.3.6.1.2.1.153.1.29.1.10 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.29.1.2 |
|
|
|
.1.3.6.1.2.1.153.1.29.1.3 |
|
|
|
.1.3.6.1.2.1.153.1.29.1.4 |
|
.1.3.6.1.2.1.153.1.29.1.5 |
||
.1.3.6.1.2.1.153.1.29.1.6 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.29.1.7 |
|
.1.3.6.1.2.1.153.1.29.1.8 |
||
.1.3.6.1.2.1.153.1.29.1.9 |
||
.1.3.6.1.2.1.153.1.3 |
||
.1.3.6.1.2.1.153.1.3.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.3.1.1 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.3.1.2 |
|
.1.3.6.1.2.1.153.1.3.1.3 |
||
|
Enumeration
|
.1.3.6.1.2.1.153.1.3.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.3.1.5 |
|
.1.3.6.1.2.1.153.1.3.1.6 |
||
.1.3.6.1.2.1.153.1.3.1.7 |
||
.1.3.6.1.2.1.153.1.3.1.8 |
||
.1.3.6.1.2.1.153.1.30 |
||
.1.3.6.1.2.1.153.1.30.1 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.30.1.1 |
|
.1.3.6.1.2.1.153.1.30.1.10 |
||
.1.3.6.1.2.1.153.1.30.1.11 |
||
.1.3.6.1.2.1.153.1.30.1.2 |
||
.1.3.6.1.2.1.153.1.30.1.3 |
||
.1.3.6.1.2.1.153.1.30.1.4 |
||
.1.3.6.1.2.1.153.1.30.1.5 |
||
.1.3.6.1.2.1.153.1.30.1.6 |
||
.1.3.6.1.2.1.153.1.30.1.7 |
||
|
Unsigned32
|
.1.3.6.1.2.1.153.1.30.1.8 |
|
.1.3.6.1.2.1.153.1.30.1.9 |
||
.1.3.6.1.2.1.153.1.31 |
||
.1.3.6.1.2.1.153.1.31.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.31.1.1 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.31.1.2 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.31.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.31.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.31.1.5 |
|
.1.3.6.1.2.1.153.1.31.1.6 |
||
.1.3.6.1.2.1.153.1.31.1.7 |
||
.1.3.6.1.2.1.153.1.31.1.8 |
||
.1.3.6.1.2.1.153.1.32 |
||
.1.3.6.1.2.1.153.1.32.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.32.1.1 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.32.1.2 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.32.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.32.1.4 |
|
.1.3.6.1.2.1.153.1.32.1.5 |
||
.1.3.6.1.2.1.153.1.32.1.6 |
||
|
|
.1.3.6.1.2.1.153.1.32.1.7 |
|
.1.3.6.1.2.1.153.1.33 |
||
.1.3.6.1.2.1.153.1.33.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.153.1.33.1.1 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.33.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.33.1.3 |
|
.1.3.6.1.2.1.153.1.33.1.4 |
||
.1.3.6.1.2.1.153.1.33.1.5 |
||
|
|
.1.3.6.1.2.1.153.1.33.1.6 |
|
.1.3.6.1.2.1.153.1.34 |
||
.1.3.6.1.2.1.153.1.34.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.34.1.1 |
|
.1.3.6.1.2.1.153.1.34.1.10 |
||
|
|
.1.3.6.1.2.1.153.1.34.1.2 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.34.1.3 |
|
.1.3.6.1.2.1.153.1.34.1.4 |
||
|
|
OctetString
|
.1.3.6.1.2.1.153.1.34.1.5 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.34.1.6 |
.1.3.6.1.2.1.153.1.34.1.7 |
||
.1.3.6.1.2.1.153.1.34.1.8 |
||
.1.3.6.1.2.1.153.1.34.1.9 |
||
.1.3.6.1.2.1.153.1.35 |
||
.1.3.6.1.2.1.153.1.35.1 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.35.1.1 |
|
|
|
OctetString
|
.1.3.6.1.2.1.153.1.35.1.2 |
.1.3.6.1.2.1.153.1.35.1.3 |
||
.1.3.6.1.2.1.153.1.35.1.4 |
||
.1.3.6.1.2.1.153.1.35.1.5 |
||
.1.3.6.1.2.1.153.1.4 |
||
.1.3.6.1.2.1.153.1.4.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.4.1.1 |
|
.1.3.6.1.2.1.153.1.4.1.2 |
||
.1.3.6.1.2.1.153.1.4.1.3 |
||
.1.3.6.1.2.1.153.1.4.1.4 |
||
.1.3.6.1.2.1.153.1.4.1.5 |
||
.1.3.6.1.2.1.153.1.4.1.6 |
||
.1.3.6.1.2.1.153.1.4.1.7 |
||
.1.3.6.1.2.1.153.1.4.1.8 |
||
.1.3.6.1.2.1.153.1.4.1.9 |
||
.1.3.6.1.2.1.153.1.5 |
||
.1.3.6.1.2.1.153.1.5.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.5.1.1 |
|
.1.3.6.1.2.1.153.1.5.1.2 |
||
.1.3.6.1.2.1.153.1.5.1.3 |
||
.1.3.6.1.2.1.153.1.5.1.4 |
||
.1.3.6.1.2.1.153.1.5.1.5 |
||
.1.3.6.1.2.1.153.1.5.1.6 |
||
.1.3.6.1.2.1.153.1.6 |
||
.1.3.6.1.2.1.153.1.6.1 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.6.1.1 |
|
.1.3.6.1.2.1.153.1.6.1.2 |
||
.1.3.6.1.2.1.153.1.6.1.3 |
||
.1.3.6.1.2.1.153.1.6.1.4 |
||
.1.3.6.1.2.1.153.1.6.1.5 |
||
.1.3.6.1.2.1.153.1.6.1.6 |
||
.1.3.6.1.2.1.153.1.7 |
||
.1.3.6.1.2.1.153.1.7.1 |
||
.1.3.6.1.2.1.153.1.7.1.0 |
||
.1.3.6.1.2.1.153.1.7.2 |
||
.1.3.6.1.2.1.153.1.7.3 |
||
.1.3.6.1.2.1.153.1.8 |
||
.1.3.6.1.2.1.153.1.8.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.8.1.1 |
|
.1.3.6.1.2.1.153.1.8.1.10 |
||
.1.3.6.1.2.1.153.1.8.1.11 |
||
|
Integer32
|
.1.3.6.1.2.1.153.1.8.1.12 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.8.1.13 |
|
.1.3.6.1.2.1.153.1.8.1.14 |
||
.1.3.6.1.2.1.153.1.8.1.15 |
||
.1.3.6.1.2.1.153.1.8.1.16 |
||
|
Bits
|
.1.3.6.1.2.1.153.1.8.1.2 |
|
.1.3.6.1.2.1.153.1.8.1.3 |
||
.1.3.6.1.2.1.153.1.8.1.4 |
||
.1.3.6.1.2.1.153.1.8.1.5 |
||
.1.3.6.1.2.1.153.1.8.1.6 |
||
.1.3.6.1.2.1.153.1.8.1.7 |
||
.1.3.6.1.2.1.153.1.8.1.8 |
||
.1.3.6.1.2.1.153.1.8.1.9 |
||
.1.3.6.1.2.1.153.1.9 |
||
.1.3.6.1.2.1.153.1.9.1 |
||
|
OctetString
|
.1.3.6.1.2.1.153.1.9.1.1 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.9.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.153.1.9.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.153.1.9.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.153.1.9.1.5 |
|
.1.3.6.1.2.1.153.1.9.1.6 |
||
.1.3.6.1.2.1.153.1.9.1.7 |
||
.1.3.6.1.2.1.153.1.9.1.8 |
||
.1.3.6.1.2.1.153.2 |
||
.1.3.6.1.2.1.153.2.0 |
||
.1.3.6.1.2.1.153.2.1 |
||
.1.3.6.1.2.1.153.2.1.1 |
||
.1.3.6.1.2.1.153.2.1.2 |
||
.1.3.6.1.2.1.153.2.1.3 |
||
.1.3.6.1.2.1.153.2.1.4 |
||
.1.3.6.1.2.1.153.2.1.5 |
||
.1.3.6.1.2.1.153.2.1.6 |
||
.1.3.6.1.2.1.153.2.1.7 |
||
|
Enumeration
|
.1.3.6.1.2.1.153.2.1.8 |
|
|
OctetString
|
.1.3.6.1.2.1.153.2.1.9 |
|
.1.3.6.1.2.1.153.3 |
||
.1.3.6.1.2.1.153.3.1 |
||
.1.3.6.1.2.1.153.3.2 |
Dependencies (6) 6 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- IPSEC-ISAKMP-IKE-DOI-TCrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- IPSEC-POLICY-MIBrfcselected
Type Definitions (6)
| Enumeration |
enabled(1)disabled(2) |
|
| Enumeration |
or(1)and(2) |
|
| Enumeration |
reserved(0)unknown(1)sharedSecret(2)x509(3)kerberos(4) |
|
| Integer32 |
range: -1..65536 |
|
| OctetString |
range: 1..256 |
|
| Enumeration |
outgoing(1)incoming(2) |
Conformance Groups (19)
Compliance Statements (4)
OID
.1.3.6.1.2.1.153.3.1.1The compliance statement for SNMP entities that include an
IPsec MIB implementation with Endpoint, Rules, and filters
support.
IPsec MIB implementation with Endpoint, Rules, and filters
support.
Required groups
| mandatory | ipspEndpointGroup | |
| mandatory | ipspGroupContentsGroup | |
| mandatory | ipspRuleDefinitionGroup | |
| mandatory | ipspIPHeaderFilterGroup | |
| mandatory | ipspStaticFilterGroup | |
| optional | ipspIpsecSystemPolicyNameGroup |
This group is mandatory for IPsec Policy implementations which support a system policy group name. |
| optional | ipspCompoundFilterGroup |
This group is mandatory for IPsec Policy implementations which support compound filters. |
| optional | ipspIPOffsetFilterGroup |
This group is mandatory for IPsec Policy implementations which support IP Offset filters. In general, this SHOULD be supported by a compliant IPsec Policy implementation. |
| optional | ipspTimeFilterGroup |
This group is mandatory for IPsec Policy implementations which support time filters. |
| optional | ipspIpsoHeaderFilterGroup |
This group is mandatory for IPsec Policy implementations which support IPSO Header filters. |
| optional | ipspCredentialFilterGroup |
This group is mandatory for IPsec Policy implementations which support Credential filters. |
| optional | ipspPeerIdFilterGroup |
This group is mandatory for IPsec Policy implementations which support Peer Identity filters. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ipspEndGroupRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspEndGroupLastChanged | noaccess | This object not required for compliance. | |
| ipspGroupContComponentType |
Enumeration
rule(2)
|
Support of the value group(1) is only required for implementations which support Policy Groups within Policy Groups. |
|
| ipspGroupContRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspGroupContLastChanged | noaccess | This object not required for compliance. | |
| ipspRuleDefRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspRuleDefLastChanged | noaccess | This object not required for compliance. | |
| ipspCompFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCompFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspSubFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspSubFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspIpHeadFiltIPVersion |
ipv4(1), ipv6(2)
|
Only the ipv4 and ipv6 values make sense for this object. |
|
| ipspIpHeadFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpHeadFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspIpOffFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpOffFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspTimeFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspTimeFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspIpsoHeadFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpsoHeadFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspCmcDistributionPoint | readonly | Only read-only access is required for compliance. | |
| ipspCmcThisUpdate | readonly | Only read-only access is required for compliance. | |
| ipspCmcNextUpdate | readonly | Only read-only access is required for compliance. | |
| ipspCmcLastChanged | noaccess | This object not required for compliance. | |
| ipspCmcStorageType | readonly | Only read-only access is required for compliance. | |
| ipspCmcRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspRctRevokedDate | readonly | Only read-only access is required for compliance. | |
| ipspRctRevokedReason | readonly | Only read-only access is required for compliance. | |
| ipspRctLastChanged | noaccess | This object not required for compliance. | |
| ipspRctStorageType | readonly | Only read-only access is required for compliance. | |
| ipspRctRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspIcmsDistinguishedName | readonly | Only read-only access is required for compliance. | |
| ipspIcmsPolicyStatement | readonly | Only read-only access is required for compliance. | |
| ipspIcmsMaxChainLength | readonly | Only read-only access is required for compliance. | |
| ipspIcmsCredentialName | readonly | Only read-only access is required for compliance. | |
| ipspIcmsLastChanged | noaccess | This object not required for compliance. | |
| ipspIcmsStorageType | readonly | Only read-only access is required for compliance. | |
| ipspIcmsRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspCredType | readonly | Only read-only access is required for compliance. | |
| ipspCredCredential | readonly | Only read-only access is required for compliance. | |
| ipspCredMngName | readonly | Only read-only access is required for compliance. | |
| ipspCredRemoteID | readonly | Only read-only access is required for compliance. | |
| ipspCredStorageType | readonly | Only read-only access is required for compliance. | |
| ipspCredRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspCredFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredFiltLastChanged | noaccess | This object not required for compliance. | |
| ipspPeerIdFiltRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspPeerIdFiltLastChanged | noaccess | This object not required for compliance. |
OID
.1.3.6.1.2.1.153.3.1.2The compliance statement for SNMP entities that include an
IPsec MIB implementation and supports IPsec actions.
IPsec MIB implementation and supports IPsec actions.
Required groups
| mandatory | ipspIpsecGroup | |
| mandatory | ipspStaticActionGroup | |
| mandatory | ipspPreconfiguredGroup | |
| optional | ipspCompoundActionGroup |
This group is mandatory for IPsec Policy implementations which support compound actions. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ipspCompActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCompActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| aiipspCompActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| aiipspCompActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIpsecActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpsecActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIpsecPropRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpsecPropLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIpsecTranRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpsecTranLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspSaNegParamRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspSaNegParamLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspAhTranRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspAhTranLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspEspTranRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspEspTranLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIpcompTranRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIpcompTranLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspPeerIdAddressType |
ipv4(1), ipv6(2)
|
Only the ipv4 and ipv6 values make sense for this object. |
|
| ipspPeerIdRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspPeerIdLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspCredRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspCredSegRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredSegLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspSaPreActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspSaPreActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
OID
.1.3.6.1.2.1.153.3.1.3The compliance statement for SNMP entities that include an
IPsec MIB implementation and supports IKE actions.
IPsec MIB implementation and supports IKE actions.
Required groups
| mandatory | ipspIkeGroup | |
| optional | ipspCompoundActionGroup |
This group is mandatory for IPsec Policy implementations which support compound actions. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ipspCompActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCompActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| aiipspCompActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| aiipspCompActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIkeActRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIkeActLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIkeActPropRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIkeActPropLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIkePropProposalRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIkePropProposalLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspSaNegParamRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspSaNegParamLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspIkeIdRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspIkeIdLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspPeerIdRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspPeerIdLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspAutoIkeAddressType |
ipv4(1), ipv6(2)
|
Only the ipv4 and ipv6 values make sense for this object. |
|
| ipspAutoIkeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspAutoIkeLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspCmcDistributionPoint | readonly | Only read-only access is required for compliance. | |
| ipspCmcThisUpdate | readonly | Only read-only access is required for compliance. | |
| ipspCmcNextUpdate | readonly | Only read-only access is required for compliance. | |
| ipspCmcLastChanged | noaccess | This object not required for compliance. | |
| ipspCmcStorageType | readonly | Only read-only access is required for compliance. | |
| ipspCmcRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspRctRevokedDate | readonly | Only read-only access is required for compliance. | |
| ipspRctRevokedReason | readonly | Only read-only access is required for compliance. | |
| ipspRctLastChanged | noaccess | This object not required for compliance. | |
| ipspRctStorageType | readonly | Only read-only access is required for compliance. | |
| ipspRctRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspIcmsDistinguishedName | readonly | Only read-only access is required for compliance. | |
| ipspIcmsPolicyStatement | readonly | Only read-only access is required for compliance. | |
| ipspIcmsMaxChainLength | readonly | Only read-only access is required for compliance. | |
| ipspIcmsCredentialName | readonly | Only read-only access is required for compliance. | |
| ipspIcmsLastChanged | noaccess | This object not required for compliance. | |
| ipspIcmsStorageType | readonly | Only read-only access is required for compliance. | |
| ipspIcmsRowStatus | readonly |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. Only read-only access is required for compliance. |
| ipspCredRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
|
| ipspCredSegRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of the values notInService(2), notReady(3), and createAndWait(5) is not required. |
|
| ipspCredSegLastChanged | noaccess | This object is optional so as not to impose an undue burden on resource-constrained devices. |
OID
.1.3.6.1.2.1.153.3.1.4The compliance statement for SNMP entities that support
sending notifications when actions are invoked.
sending notifications when actions are invoked.
Required groups
| mandatory | ipspActionLoggingObjectGroup | |
| mandatory | ipspActionNotificationGroup |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.153.2.0.1 |
Notification that an action was executed by a rule. Only
actions with logging enabled will result in this notification getting sent. The objects sent must include the ipspActionExecuted object which will indicate which action was executed within the scope of the rule. Additionally the ipspIPSourceType, ipspIPSourceAddress, ipspIPDestinationType, and ipspIPDestinationAddress objects must be included to indicate the packet source and destination of the packet that triggered the action. Finally the ipspIPInterfaceType, ipspIPInterfaceAddress, and ipspPacketDirection objects are included to indicate which interface the action was executed in association with and if the packet was inbound or outbond through the endpoint. Note that compound actions with multiple executed subactions may result in multiple notifications being sent from a single rule execution. |
|
.1.3.6.1.2.1.153.2.0.2 |
Notification that a packet passed through an SA. Only
SA's created by actions with packet logging enabled will result in this notification getting sent. The objects sent must include the ipspActionExecuted which will indicate which action was executed within the scope of the rule. Additionally, the ipspIPSourceType, ipspIPSourceAddress, ipspIPDestinationType, and ipspIPDestinationAddress, objects must be included to indicate the packet source and destination of the packet that triggered the action. The ipspIPInterfaceType, ipspIPInterfaceAddress, and ipspPacketDirection objects are included to indicate which endpoint the packet was associated with. Finally, ipspPacketPart is including for sending a variable sized part of the front of the packet depending on the value of IpspIPPacketLogging. |