IPI-VRF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

ipiVrfTable

table
.1.3.6.1.4.1.6926.2.35.1.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk ipiVrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-VRF-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-VRF-MIB::ipiVrfTable' 
This table contains entries representing a VRF - Virtual
Routing and Forwarding instance. There will be an entry for
each VRF instance created in the system.
ipiVrfEntry row .1.3.6.1.4.1.6926.2.35.1.1.1.1
An entry representing the information pertaining to a virtual
routing and forwarding instance.
Indexes
No indexes recorded
Column Syntax OID
ipiVrfIndex
An identifier that is assigned to each VRF and is used to
uniquely identify it. The uniqueness of this identifier is
restricted only to this device.
Unsigned32 .1.3.6.1.4.1.6926.2.35.1.1.1.1.1
ipiVrfName
The human-readable name of the VRF instance. This name
uniquely identifies the VRF instance in the system.

This object is mandatory for creating an entry in this table.
OctetStringr/w .1.3.6.1.4.1.6926.2.35.1.1.1.1.2
ipiVrfOperStatus
Denotes whether a VRF is operational or not. A VRF is
up(1) when at least one interface associated with the
VRF, which ifOperStatus is up(1). A VRF is down(2) when:

a. There does not exist at least one in…
Enumeration .1.3.6.1.4.1.6926.2.35.1.1.1.1.3
ipiVrfRouteDistProt
Denotes the route distribution protocol enabled in this
VRF. Note that more than one routing protocol may be
enabled at the same time.
Bits .1.3.6.1.4.1.6926.2.35.1.1.1.1.4
ipiVrfStorageType
The storage type for this entry.
SNMPv2-TCStorageType
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.6926.2.35.1.1.1.1.5
ipiVrfRowStatus
This object is used to create, modify, and/or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6926.2.35.1.1.1.1.6

ipiVrfInterfaceTable

table
.1.3.6.1.4.1.6926.2.35.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk ipiVrfInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-VRF-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-VRF-MIB::ipiVrfInterfaceTable' 
This table contains the entries representing the interfaces
associated with a VRF instance.
ipiVrfInterfaceEntry row .1.3.6.1.4.1.6926.2.35.1.2.1.1
An entry in this table represents an interface to which a VRF
is associated. An interface can be associated with only one VRF.
There will be one entry per interface in this table.
Indexes
No indexes recorded
Column Syntax OID
ipiVrfInterfaceIndex
This is a unique index for an entry in this table. A non-zero
index for an entry indicates the ifIndex for the corresponding
interface entry in the ifTable. Note that this table does not
necessarily correspond one-to-o…
Integer32 .1.3.6.1.4.1.6926.2.35.1.2.1.1.1
ipiVrfInterfaceName
The human-readable name of the VRF instance. This name
uniquely identifies the VRF instance in the system.
OctetStringr/w .1.3.6.1.4.1.6926.2.35.1.2.1.1.2
ipiVrfInterfaceStorageType
The storage type for this entry.
SNMPv2-TCStorageType
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.6926.2.35.1.2.1.1.3
ipiVrfInterfaceRowStatus
This object is used to create, modify, and/or delete a row in
this table.

When a row is created in this table the VRF is associated to an
interface. When a row is deleted from this table the VRF is
dis-as…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6926.2.35.1.2.1.1.4