IPI-CMM-COHERENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
205

cmmCoherentModuleTable

table
.1.3.6.1.4.1.36673.100.1.15.1.1 · 1 row entry · 18 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentModuleTable' 
A list of entries containing information
for each Optical module state.
cmmCoherentModuleEntry row .1.3.6.1.4.1.36673.100.1.15.1.1.1
A list of entries containing information
for each optical module state.
Indexes
Column Syntax OID
cmmSlotIndex
The optical slot identifier.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.1
cmmModulePresence
Cage presence in optical module interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1present
2notpresent
3unknown
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.2
cmmModuleType
Module Type.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0unknown
1dco
2aco
3non-coherent
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.3
cmmOperAdminStatus
Admin operational status of the optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.4
cmmOperationalStatus
Operational status of the optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1initialize
2ready
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.5
cmmOpticalVendorName
Optical module Vendor name.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.6
cmmOpticalVendorSerialnum
The optical module vendor serial number.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.7
cmmOpticalVendorFirmwarenumber
Vendor Firmware Version.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.8
cmmNumNetworkInterfaces
Number of optical channel interfaces.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.9
cmmNumHostInterfaces
Number of ethernet non-optical ports supported for the optical
interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.10
cmmCfpTransPresence
To verify cfp transceiver presence
Enumeration
Enumerated Values:
1present
2not-present
3unknown
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.11
cmmCfpVendorName
CFP Vendor Name.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.12
cmmCfpVendorOui
CFP Vendor Oui in Hex format.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.13
cmmCfpVendorPartNum
The optical module CFP vendor part number.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.14
cmmCfpVendorSerialNum
CFP Vendor Serial Number.
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.15
cmmCfpFirmwareVersion
CFP Vendor Firmware Version.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.16
cmmModuleTemp
Internally measured temperature.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.17
cmmModuleVolt
Internally measured transceiver supply voltage
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.18

cmmCoherentModuleFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentModuleFAWSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentModuleFAWSTable' 
A optical elated
objects for a particular port..
cmmCoherentModuleFAWSEntry row .1.3.6.1.4.1.36673.100.1.15.1.2.1
A optical entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmModuleTemperature
Module Temperature alarm.
Enumeration
Enumerated Values:
1temperature-low-alarm
2temperature-low-warning
3temperature-high-warning
4temperature-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.1
cmmModuleVoltage
Module voltage alarm.
Enumeration
Enumerated Values:
1voltage-low-alarm
2voltage-low-warning
3voltage-high-warning
4voltage-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.2
cmmModuleGeneralStatus
Module General Status alarm. Empty String indicates unavailable.
Zeros Indicates No Alarms.
ModuleGeneralStatusCode
Type Values:
0hw-interlock
1tx-loss-Of-signal-functionality
2rx-loss-Of-signal
3rx-network-loss-of-lock
4tx-host-loss-of-lock
5hostlane-out-of-alignment
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.3
cmmModuleFaultStatus
Module Fault Status alarm. Empty String indicates unavailable.
Zeros Indicates No Alarms.
ModuleFaultStatusCode
Type Values:
0over-temperature-fault
1hardware-fault
2initialization-fault
3power-supply-fault
4checksum-fault
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.4

cmmCoherentModuleMonitorTable

table
.1.3.6.1.4.1.36673.100.1.15.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentModuleMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentModuleMonitorTable' 
A optical elated
objects for a particular port..
cmmCoherentModuleMonitorEntry row .1.3.6.1.4.1.36673.100.1.15.1.3.1
A optical entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmModuleTempHighAlarmThreshold
Module Temperature High Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.1
cmmModuleTempHighWarnThreshold
Module Temperature High Warn Threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.2
cmmModuleTempLowWarnThreshold
Module Temperature Low Warn Threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.3
cmmModuleTempLowAlarmhreshold
Module Temperature Low Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.4
cmmModuleVoltHighAlarmThreshold
Module Voltage High Alarm threshold in V.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.5
cmmModuleVoltHighWarnThreshold
Module Voltage High Warn Threshold in v.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.6
cmmModuleVoltLowWarnThreshold
Module Voltage Low Warn Threshold in V.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.7
cmmModuleVoltlowAlarmThreshold
Module Volatge Low Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.8

cmmCoherentModuleConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentModuleConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentModuleConfigTable' 
A list of entries containing Configuration information
for each Optical module.
cmmCoherentModuleConfigTableEntry row .1.3.6.1.4.1.36673.100.1.15.1.4.1
A list of entries containing Configuration information
for each optical module.
Indexes
Column Syntax OID
cmmAdminStatus
Admin operational status of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.1
cmmModuleServiceStatus
To enable service for the optical controller module.
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.2
cmmSlotDescription
Specifies Coherent Optics slot Description.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.3
cmmAllNetifLoopBack
All the network interfaces loopback-type of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.4
cmmAllHostifLoopBack
All the host interfaces loopback-type of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.5

cmmCoherentModuleEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.1.5 · 1 row entry · 19 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentModuleEventCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentModuleEventCountTable' 
Event count information for each Optical module.
cmmCoherentModuleEventCountEntry row .1.3.6.1.4.1.36673.100.1.15.1.5.1
A list of entries containing Coherent Module event count information.
Indexes
Column Syntax OID
cmmHwInterlockEC
Module General Fault hardware interlock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.1
cmmTXLossofSignalFunctionalityEC
Module General Fault tx loss of signal functionality
event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.2
cmmRXLossofSignalEC
Module General Fault rx loss of signal event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.3
cmmRXNetworkLossofLockEC
Module General Fault rx network loss of lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.4
cmmTXHostLossofLockEC
Module General Fault tx host loss of lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.5
cmmHostLaneOutofAlignmentEC
Module General Fault hostlane out of alignment event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.6
cmmOverTemperatureFaultEC
Module Fault Status over temperature fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.7
cmmHardwareFaultEC
Module Fault Status hardware fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.8
cmmInitializationFaultEC
Module Fault Status initialization fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.9
cmmPowersupplyFaultEC
Module Fault Status power supply fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.10
cmmChecksumFaultEC
Module Fault Status checksum fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.11
cmmTemperatureLowAlarmEC
Module temperature low alarm event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.12
cmmTemperatureLowWarningEC
Module temperature low warning event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.13
cmmTemperatureHighWarningEC
Module temperature high warning event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.14
cmmTemperatureHighAlarmEC
Module temperature high alarm event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.15
cmmPowerLowAlarmEC
Module power low alarm event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.16
cmmPowerLowWarningEC
Module power low warning event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.17
cmmPowerHighWarningEC
Module power high warning event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.18
cmmPowerHighAlarmEC
Module power high alarm event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.19

cmmCoherentChannelTable

table
.1.3.6.1.4.1.36673.100.1.15.2.1 · 1 row entry · 35 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelTable' 
A optical network interface entry containing interface related
objects for a particular port..
cmmCoherentChannelEntry row .1.3.6.1.4.1.36673.100.1.15.2.1.1
A optical network interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmNetIfIndex
Index of network interface in a coherent optical module.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.1
cmmChannelOperationalStatus
Operational status of the network interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0unknown
1reset
2initialize
3low-power
4high-power-up
5tx-off
6tx-turn-on
7ready
8tx-turn-off
9high-power-down
10fault
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.2
cmmDspOpertionalStatus
Operational status of the Digital signal processor of the network
interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1no-module
2waiting-configuration
3booting-top-half
4waiting-aco-module
5booting-aco-module
6waiting-rx-signal
7booting-bottom-half
8ready
9misc-config
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.3
cmmOperModulationFormat
Specifies the modulation format of the optical signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1modulation-format-bpsk
2modulation-format-dp-bpsk
3modulation-format-qpsk
4modulation-format-dp-qpsk
5modulation-format-8-qam
6modulation-format-dp-8-qam
7modulation-format-16-qam
8modulation-format-dp-16-qam
9modulation-format-32-qam
10modulation-format-dp-32-qam
11modulation-format-64-qam
12modulation-format-dp-64-qam
13modulation-format-dp-qpsk-200g
14modulation-format-dp-qpsk-ofec
15modulation-format-8qam-200g-ofec
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.4
cmmOperDifferntialEncoding
Enable differential encoding on a optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.5
cmmOperPulseShapingRx
Enable or disable rx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.6
cmmOperPulseShapingTx
Enable or disable tx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.7
cmmOperLoopbackType
use to send and receive data from the same network interface
port to verify that the port is operational.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.8
cmmOperPrbsType
Simulate random data for transmission across the
network interface if set.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1prbs7
2prbs9
3prbs11
4prbs15
5prbs20
6prbs23
7prbs31
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.9
cmmOperLosiEnabled
lOSI is enabled or not.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.10
cmmPrbsInSync
PRBS in SYNC.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.11
cmmCurrentPrbsBer
Current PRBS BER in the units of 1e-18.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.12
cmmCurrentBerPeriod
Current BER Period in milli second.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
milli secondsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.13
cmmCurrentPreFecBer
Current Pre Fec Ber in the units of 1e-18 ber/sec.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.14
cmmCurrentPostFecBer
Current Post Fec Ber in the units of 1e-18 ber/BER Period.
BER value 2 represents internal error/ Device not ready/
Not applicable/ Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.15
cmmChromaticDispersion
Current chromatic dispersion in pico second/nano meter (ps/nm).
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
ps/nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.16
cmmDifferentialGroupDelay
The Differential Group delay in pico second.
psSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.17
cmmOperSoftTxDisable
Disable transmission of data on a network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.18
cmmOperOutputPower
Specifies the output power of the optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.19
cmmOperLaserFreq
Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.20
cmmMinLaserFreq
Min frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.21
cmmMaxLaserFreq
Max frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.22
cmmCurrentTxLaserFreq
Current Tx-Laser Frequency in Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.23
cmmTxGridSpacing
Grid spacing.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0grid-spacing-6-25-ghz
1grid-spacing-12-5-ghz
2grid-spacing-25-ghz
3grid-spacing-33-ghz
4grid-spacing-50-ghz
5grid-spacing-100-ghz
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.24
cmmLaserGridSupport
Laser grid suppported by the Coherent Module.
Empty string indicates internal error.
GridSupportCode
Type Values:
0grid-6-25-ghz
1grid-12-5-ghz
2grid-25-ghz
3grid-33-ghz
4grid-50-ghz
5grid-100-ghz
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.25
cmmCurrentOutputPower
Current Output Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.26
cmmCurrentInputPower
Current input power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.27
cmmCurrentPostVoaPower
Current POST VOA Power in dBm.
indicates unavailable
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.28
cmmCurrentProvisionedChannelPower
Current Province Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.29
cmmOSNR
Current OSNR in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.30
cmmCurrentPostVOAProvisionedChannelPower
Current Post VOA Provisioned Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.31
cmmCurrentQMargin
Current Network Q-Margin Value in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.32
cmmFECUncorrectedBlocksCount
FEC UnCorrected Blocks Count value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.33
cmmLaserAge
Laser Age mentioned in percentage.
0 meaning Beginning of Life and 100 meaning End of Life.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error.
% Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.34
cmmOperFecMode
FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error.
Enumeration
Enumerated Values:
0unknown
1fec-15per-everest
2fec-15per-denali
3fec-otu4-g709
4fec-otu4-transparent
5fec-otu4-7per-staircase
6fec-25per-hc-sd2
7sd-fec
8sc-fec
9ufec
10ofec
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.35

cmmCoherentChannelFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelFAWSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelFAWSTable' 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentChannelFAWSTableEntry row .1.3.6.1.4.1.36673.100.1.15.2.2.1
A optical channel interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmRxLos
Netif Rx-Los Alarm.
Enumeration
Enumerated Values:
1rx-los-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.1
cmmRxOtu
Netif Rx-Otu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOtuStatusCode
Type Values:
0loss-of-frame
1loss-of-multiframe
2backward-defect-detection
3alarm-indication-signal
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.2
cmmRxOdu
Netif Rx-Odu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOduStatusCode
Type Values:
0backward-defect-indication
1alarm-indication-signal
2open-connection-indication
3locked-defect
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.3
cmmRxOpu
Netif Rx-Opu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOpuStatusCode
Type Values:
0payload-Mismatch
1client-signal-fail
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.4
cmmRxTs
Netif Rx-Ts Alarm. Empty String indicates unavailable.Zeros indicated no alarm
RxTsStatusCode
Type Values:
0loss-of-lock
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.5
cmmInPower
Channel Rx Input power alarm.
Enumeration
Enumerated Values:
1power-low-alarm
2power-low-warning
3power-high-warning
4power-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.6
cmmOutPower
Channel Tx power alarm.
Enumeration
Enumerated Values:
1power-low-alarm
2power-low-warning
3power-high-warning
4power-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.7
cmmPreFecBerSignal
Channel Prefec ber signal status power alarm.
Enumeration
Enumerated Values:
1prefec-ber-signal-degrade
2prefec-ber-signal-failure
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.8
cmmQMarginAlarm
Netif Q-Margin Alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.9
cmmSNRAlarm
Netif SNR Alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.10
cmmChromaticDispersionAlarm
Netif Chromatic Dispersion alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.11

cmmCoherentChannelMonitorTable

table
.1.3.6.1.4.1.36673.100.1.15.2.3 · 1 row entry · 22 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelMonitorTable' 
A Coherent threshold Monitor entry containing
all network-interface related monitoring Thresholds for a
particular Slot.
cmmCoherentChannelMonitorTableEntry row .1.3.6.1.4.1.36673.100.1.15.2.3.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmOperInputPowerHighAlarmThreshold
Specifies the Rx intput power High Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.1
cmmOperInputPowerHighWarningThreshold
Specifies the Rx intput power High Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.2
cmmOperInputPowerLowWarningThreshold
Specifies the Rx intput power Low Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.3
cmmOperInputPowerLowAlarmThreshold
Specifies the Rx intput power low Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.4
cmmPermissibleInputPowerHighAlarmThresholdMin
Specifies the Rx intput power High Alarm Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.5
cmmPermissibleInputPowerHighAlarmThresholdMax
Specifies the Rx intput power High Alarm Maximium Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.6
cmmPermissibleInputPowerHighWarningThresholdMin
Specifies the Rx intput power High Warning Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.7
cmmPermissibleInputPowerHighWarningThresholdMax
Specifies the Rx intput power High Warning Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.8
cmmPermissibleInputPowerLowWarningthresholdMin
Specifies the Rx intput power Low Warning Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.9
cmmPermissibleInputPowerLowWarningthresholdMax
Specifies the Rx intput power Low Warning Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.10
cmmPermissibleInputPowerLowAlarmThresholdMin
Specifies the Rx intput power low Alarm Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.11
cmmPermissibleInputPowerLowAlarmThresholdMax
Specifies the Rx intput power low Alarm Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.12
cmmOutputPowerHighAlarmThreshold
Specifies the Tx output power High Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.13
cmmOutputPowerHighWarningThreshold
Specifies the Tx output power High Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.14
cmmOutputPowerLowWarningThreshold
Specifies the Tx output power Low Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.15
cmmOutputPowerLowAlarmThreshold
Specifies the Tx output power low Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.16
cmmOperPreFecBerSignalFailThreshold
Specifies the Signal Fail threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.17
cmmOperPreFecBerSignalDegradeThreshold
Specifies the Signal Degrade threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.18
cmmOperPreFecBerSignalclearThreshold
Specifies the Signal Clear threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.19
cmmOperQMarginThreshold
Current Network Rx Q-Margin Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.20
cmmOperOSNRThreshold
Current OSNR Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.21
cmmOperChromaticDispersionThreshold
Current chromatic dispersion threshold violation in
pico second/nano meter (ps/nm).
-100003 indicates device not ready
'-100001' indicates unavailable
ps/nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.22

cmmCoherentChannelConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.2.4 · 1 row entry · 13 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelConfigTable' 
A optical network interface entry containing interface related
objects for a particular port..
cmmCoherentChannelConfigTableEntry row .1.3.6.1.4.1.36673.100.1.15.2.4.1
A optical network interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmSoftTxDisable
Disable transmission of data on a network interface.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.1
cmmLosiEnabled
lOSI is enabled or not.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.2
cmmDifferntialEncoding
Enable differential encoding on a optical network interface.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.3
cmmOutputPower
Specifies the output power of the optical network interface.
'-100001' indicates internal error
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.4
cmmLaserFreq
Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates internal error
HzSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.5
cmmModulationFormat
Specifies the modulation format of the optical signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
1modulation-format-bpsk
2modulation-format-dp-bpsk
3modulation-format-qpsk
4modulation-format-dp-qpsk
5modulation-format-8-qam
6modulation-format-dp-8-qam
7modulation-format-16-qam
8modulation-format-dp-16-qam
9modulation-format-32-qam
10modulation-format-dp-32-qam
11modulation-format-64-qam
12modulation-format-dp-64-qam
13modulation-format-dp-qpsk-200g
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.6
cmmPulseShapingRx
Enable or disable rx pulse shaping of the signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.7
cmmPulseShapingTx
Enable or disable tx pulse shaping of the signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.8
cmmLoopbackType
use to send and receive data from the same network interface
port to verify that the port is operational.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.9
cmmPrbsType
Simulate random data for transmission across the
network interface if set.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1prbs7
2prbs9
3prbs11
4prbs15
5prbs20
6prbs23
7prbs31
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.10
cmmFecMode
FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1fec-15per-everest
2fec-15per-denali
3fec-otu4-g709
4fec-otu4-transparent
5fec-otu4-7per-staircase
6fec-25per-hc-sd2
7sd-fec
8sc-fec
9ufec
10ofec
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.11
cmmOperationalMode
Current operational mode.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1mod-format-dp-8-qam-fec-15per-denali
2mod-format-dp-16-qam-fec-15per-denali
3mod-format-dp-qpsk-fec-15per-denali
4mod-format-dp-qpsk-fec-15per-everest
5mod-format-dp-qpsk-fec-otu4-g709
6mod-format-dp-qpsk-fec-otu4-7per-staircase
7mod-format-dp-16-qam-fec-ofec
8mod-format-dp-qpsk-fec-sc-fec
9mod-format-dp-qpsk-200g-fec-ofec
10mod-format-dp-qpsk-fec-ofec
11mod-format-8qam-200g-fec-ofec
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.12
cmmLinkDownPolicy
Make link down when parameters violate threshold values.
Bits
Enumerated Values:
0pre-fec-ber
1q-margin
2snr
3chromatic-dispersion
4rx-power
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.13

cmmCoherentChannelMonitorConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.2.5 · 1 row entry · 10 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelMonitorConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelMonitorConfigTable' 
A optical network interface monitoring entry containing interface related
threshold values for a particular port..
cmmCoherentChannelMonitorConfigEntry row .1.3.6.1.4.1.36673.100.1.15.2.5.1
A optical network interface monitoring entry containing interface related
threshold values for a particular port..
Indexes
Column Syntax OID
cmmInputPowerHighAlarmThreshold
Specifies the rx-input power High Alarm threshold value of the
optical network interface.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.1
cmmInputPowerHighWarnThreshold
Specifies the rx-input power High Warning threshold value of the
optical network interface.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.2
cmmInputPowerLowWarnThreshold
Specifies the rx-input power Low Alarm threshold value of the
optical network interface.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.3
cmmInputPowerLowAlarmThreshold
Specifies the rx-input power Low Warning threshold value of the
optical network interface.
0.01 dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.4
cmmPreFecBerSignalFailureThreshold
Specifies the Pre fec ber Signal Failure value of the
optical network interface.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.5
cmmPreFecBerSignalDegradeThreshold
Specifies the Pre fec ber Signal Degrade value of the optical
network interface.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.6
cmmPreFecBerSignalClearThreshold
Specifies the Pre fec ber Signal CLEAR value of the optical
network interface.
1e-18SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.7
cmmQMarginThreshold
Current Network Rx Q-Margin Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.8
cmmOSNRThreshold
Current OSNR Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.9
cmmChromaticDispersionThreshold
Current chromatic dispersion threshold violation in
pico second/nano meter (ps/nm).
-100003 indicates device not ready
'-100001' indicates unavailable
ps/nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.10

cmmCoherentChannelEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.2.6 · 1 row entry · 14 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelEventCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelEventCountTable' 
Event count information for each optical network interface
cmmCoherentChannelEventCountEntry row .1.3.6.1.4.1.36673.100.1.15.2.6.1
A list of entries containing Coherent Channel network interface
event count information.
Indexes
Column Syntax OID
cmmOperInputPowerHighAlarmThresholdEC
Module Network interface oper input power high alarm threshold
event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.1
cmmOperInputPowerHighWarnThresholdEC
Module Network interface oper input power high warning threshold
event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.2
cmmOperInputPowerLowWarnThresholdEC
Module Network interface oper input power low warning threshold
event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.3
cmmOperInputPowerLowAlarmThresholdEC
Module Network interface oper input power low alarm threshold
event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.4
cmmOutputPowerHighAlarmThresholdEC
Module Network interface output power high alarm
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.5
cmmOutputPowerHighWarnThresholdEC
Module Network interface output power high warning
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.6
cmmOutputPowerLowWarnThresholdEC
Module Network interface output power low warning
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.7
cmmOutputPowerLowAlarmThresholdEC
Module Network interface output power low alarm
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.8
cmmOperPrefecberSignalFailThresholdEC
Module Network interface oper prefecber signal fail
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.9
cmmOperPrefecberSignalDegradeThresholdEC
Module Network interface oper prefecber signal degrade
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.10
cmmQMarginThresholdEC
Module Network interface current Q Margin
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.11
cmmOSNRThresholdEC
Module Network interface current SNR threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.12
cmmChromaticDispersionThresholdEC
Module Network interface current chromatic dispersion
threshold event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.13
cmmRXLossEC
Module Network interface RX loss event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.14

cmmCoherentChannelErrorCountTable

table
.1.3.6.1.4.1.36673.100.1.15.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentChannelErrorCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentChannelErrorCountTable' 
A list of entries containing information on the Network-Interface
Error counter values of Coherent Optical Module.
cmmCoherentChannelErrorCountTableEntry row .1.3.6.1.4.1.36673.100.1.15.2.7.1
Entry of Network-Interface Error
Counter values of Coherent Optical Module.
Indexes
Column Syntax OID
cmmFecUncorrectedBlocksCountSinceReset
Specifies the Uncorrected Fec BlockCount value of the network
interface since module reset, in a Coherent optical module.
'0' indicates internal error. Device not ready, Not Applicable.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.7.1.1
cmmOtnSmBip8ErrorCount
Specifies the OTN Section Monitoring BIP-8 Count Value of the
network interface, in a Coherent Optical Module. '0' indicates
internal error, Device not ready, Not Applicable.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.7.1.2

cmmCoherentHostTable

table
.1.3.6.1.4.1.36673.100.1.15.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentHostTable' 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostEntry row .1.3.6.1.4.1.36673.100.1.15.3.1.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmHostIfIndex
Index of host interface in a coherent optical module.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.1
cmmOperFecType
Fec Type of the host interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1rs
2fc
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.2
cmmOperLoopBack
Loopback Type of the host interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.3
cmmHostIfCurrentPreFecBer
The object returns the Pre-Fec-Ber value in the units of 1e-18 ber/BER Period.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.4

cmmCoherentHostFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentHostFAWSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentHostFAWSTable' 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostFAWSTableEntry row .1.3.6.1.4.1.36673.100.1.15.3.2.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmRxPcs
Hostif Rx-Pcs Alarm. Zeros indicate No alarm.
Empty String indicates unavailable
PcsAlarmStatusCode
Type Values:
0loss-of-signal
1loss-of-frame
2illegal-alignment-marker
3remote-fault
4local-fault
5high-ber
6bip-error
7deskew-error
8loss-of-block-lock
9loss-of-alignment-marker-lock
10loss-of-alignment
11opu-client-signal-fail
12error-blocks-detected
13none
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.1
cmmTxPcs
Hostif Tx-Pcs Alarm. Empty String indicates unavailable
Zeros indicate No alarm
PcsAlarmStatusCode
Type Values:
0loss-of-signal
1loss-of-frame
2illegal-alignment-marker
3remote-fault
4local-fault
5high-ber
6bip-error
7deskew-error
8loss-of-block-lock
9loss-of-alignment-marker-lock
10loss-of-alignment
11opu-client-signal-fail
12error-blocks-detected
13none
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.2
cmmCoherentHostFaultStatus
Hostif Fault Alarm status. Empty String indicates unavailable
Zeros indicate No alarm
HostLaneFaultCode
Type Values:
0tx-host-lol-l0
1tx-host-lol-l1
2tx-host-lol-l2
3tx-host-lol-l3
4ingress-aps-msg-rcvd
5deskew-lock-fault
6out-of-align
7loss-of-align
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.3

cmmCoherentHostConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentHostConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentHostConfigTable' 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostConfigTableEntry row .1.3.6.1.4.1.36673.100.1.15.3.3.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
Column Syntax OID
cmmFecType
Fec Type of the host interface in a optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1rs
2fc
 .1.3.6.1.4.1.36673.100.1.15.3.3.1.1
cmmLoopBack
Loopback Type of the host interface in a optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.3.3.1.2

cmmCoherentHostEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.3.4 · 1 row entry · 34 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentHostEventCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentHostEventCountTable' 
Event count information for each host interface
cmmCoherentHostEventCountEntry row .1.3.6.1.4.1.36673.100.1.15.3.4.1
A list of entries containing Coherent Host interface
event count information.
Indexes
Column Syntax OID
cmmIngressPCSLossofSignalEC
Host interface ingress PCS loss of signal event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.1
cmmIngressPCSLossofFrameEC
Host interface ingress PCS loss of frame event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.2
cmmIngressPCSIllegalAlignmentMarkerEC
Host interface ingress PCS illegal alignment marker event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.3
cmmIngressPCSRemoteFaultEC
Host interface ingress PCS remote fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.4
cmmIngressPCSLocalFaultEC
Host interface ingress PCS local fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.5
cmmIngressPCSHighBEREC
Host interface ingress PCS high ber event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.6
cmmIngressPCSBIPErrorEC
Host interface ingress PCS bip error event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.7
cmmIngressPCSDeskewErrorEC
Host interface ingress PCS deskew error event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.8
cmmIngressPCSLossofBlocklockEC
Host interface ingress PCS loss of block lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.9
cmmIngressPCSLossofAlignmentMarkerLockEC
Host interface ingress PCS loss of alignment marker lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.10
cmmIngressPCSLossofAlignmentEC
Host interface ingress PCS loss of alignment event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.11
cmmIngressPCSOPUClientSignalFailEC
Host interface ingress PCS OPU client signal fail event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.12
cmmIngressPCSErrorBlocksDetectedEC
Host interface ingress PCS error blocks detected event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.13
cmmEgressPCSLossofSignalEC
Host interface egress PCS loss of signal event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.14
cmmEgressPCSLossofFrameEC
Host interface egress PCS loss of frame event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.15
cmmEgressPCSIllegalAlignmentMarkerEC
Host interface egress PCS illegal alignment marker event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.16
cmmEgressPCSRemoteFaultEC
Host interface egress PCS remote fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.17
cmmEgressPCSLocalFaultEC
Host interface egress PCS local fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.18
cmmEgressPCSHighBEREC
Host interface egress PCS high ber event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.19
cmmEgressPCSBIPErrorEC
Host interface egress PCS bip error event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.20
cmmEgressPCSDeskewErrorEC
Host interface egress PCS deskew error event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.21
cmmEgressPCSLossofBlocklockEC
Host interface egress PCS loss of block lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.22
cmmEgressPCSLossofAlignmentMarkerLockEC
Host interface egress PCS loss of alignment marker
lock event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.23
cmmEgressPCSLossofAlignmentEC
Host interface egress PCS loss of alignment event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.24
cmmEgressPCSOPUClientSignalFailEC
Host interface egress PCS OPU client signal fail event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.25
cmmEgressPCSErrorBlocksDetectedEC
Host interface egress PCS error blocks detected event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.26
cmmTXHostLolL0EC
Host interface tx loss of lock lane0 event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.27
cmmTXHostLolL1EC
Host interface tx loss of lock lane1 event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.28
cmmTXHostLolL2EC
Host interface tx loss of lock lane2 event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.29
cmmTXHostLolL3EC
Host interface tx loss of lock lane3 event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.30
cmmIngressAPSMsgRcvdEC
Host interface ingress aps message received event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.31
cmmDeskewLockFaultEC
Host interface deskew lock fault event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.32
cmmOutofAlignEC
Host interface out of alignment event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.33
cmmLossofAlignEC
Host interface loss of alignment event count.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.34

cmmCoherentHostErrorCountTable

table
.1.3.6.1.4.1.36673.100.1.15.3.5 · 1 row entry · 1 columns
Open in standard view
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk cmmCoherentHostErrorCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-CMM-COHERENT-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-CMM-COHERENT-MIB::cmmCoherentHostErrorCountTable' 
A list of entries containing information on  Host-Interface
Error counter values of  Coherent Optical Module.
cmmCoherentHostErrorCountTableEntry row .1.3.6.1.4.1.36673.100.1.15.3.5.1
Entry of Host-Interface Counter values of Coherent Optical
Module.
Indexes
Column Syntax OID
cmmHostIfFecUncorrectedBlockCount
Uncorrected Fec Block Count Value of the Host-Interface in
Coherent Optical Module. '0' indicates internal error, Not a
number. Device not ready , Not applicable.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.3.5.1.1