IPE-COMMON-MIB Table View

alarmSummaryIduSlotInfoNEAddress

Enumerated Values:

0	notTurboChainPort
1	linkDown
2	blocking
3	blocked
4	forwarding
5	na

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.1.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.1.1.2

alarmIduSlotSummary

IDU Slot Summary Alarm. the maximum severity value of raised
alarms per slot.

alarmSummaryIduSwGrpInfoIndex

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.1.1.3

alarmSummaryIduSwGrpInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk alarmSummaryIduSwGrpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::alarmSummaryIduSwGrpInfoTable'

Alarm Summary per MODEM Switch group.

alarmSummaryIduSwGrpInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.1.1.2.2.1

Indexes

Column Syntax OID

alarmSummaryIduSwGrpInfoIndex

Index of this table.

alarmSummaryIduSwGrpInfoNEAddress

Enumerated Values:

0	tagBased
1	portBased

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.2.1.1

reserved.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.2.1.2

alarmIduSwGrpSummary

IDU SW Group Summary Alarm. the maximum severity value of raised
alarms per MODEM Switch group.

Constraints:
range: 20-600

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.1.1.2.2.1.3

eventTable

table

.1.3.6.1.4.1.119.2.3.69.501.2.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::eventTable'

This table represents trap counter value of each event type.

eventEntry row .1.3.6.1.4.1.119.2.3.69.501.2.4.1.1

Indexes

eventIndex

Column Syntax OID

eventIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.2.4.1.1.1

eventNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.2.4.1.1.2

eventDescription

A textual string information about the event.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.2.4.1.1.3

eventCounter

The count of SNMP TRAP/INFORM messages per event type
(alarm/status/control) since this equipment was booted.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.2.4.1.1.4

eventLastTime

The date and time when this event type was last updated.

SNMPv2-TCDateAndTime

Enumerated Values:

1	importFirmware
2	importConfig
3	exportConfig
4	exportLog

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.119.2.3.69.501.2.4.1.1.5

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.119.2.3.69.501.2.4.2.1.7

ipeTrapCounterTable

table

.1.3.6.1.4.1.119.2.3.69.501.2.5.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeTrapCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::ipeTrapCounterTable'

This table represents event total count.

ipeTrapCounterEntry row .1.3.6.1.4.1.119.2.3.69.501.2.5.1.1

Indexes

ipeTrapCounterIndex

Column Syntax OID

ipeTrapCounterIndex

Index of this table.

ipeTrapTotalCounterNEAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.2.5.1.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.2.5.1.1.2

ipeTrapTotalCounter

represents total counter value which counts all event type of
TRAP/INFORM messages.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.2.5.1.1.3

oduGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.1.1 · 1 row entry · 13 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk oduGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::oduGroupTable'

This table represents alarm and status information.

oduGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.1.1.1

Indexes

oduGroupIfIndex

Column Syntax OID

oduGroupIfIndex

Index of this table.

Enumerated Values:

0	off
1	on

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.1

oduGroupNEAddress

reserved.

Enumerated Values:

0	off
1	on

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.2

oduAlarm

ODU Alarm.

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.3

txPowerAlarm

ODU TX Power Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.4

txInputAlarm

ODU TX Input Alarm.

Enumerated Values:

0	no
1	yes

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.5

rxLevelAlarm

ODU RX Level Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.6

cpuCableOpenAlarm

ODU CPU / Cable Open Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.7

loRefAlarm

ODU LO REF Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.8

muteStatus

ODU mute status.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.9

oduPsAlarm

ODU Power Supply Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.10

oduPsSetStatus

ODU Power Supply Status.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.11

oduTypeMismatch

ODU Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.12

oduTotalAlarm

ODU Total Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.1.1.1.13

oduSwGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.1.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk oduSwGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::oduSwGroupTable'

This table represents ODU Switch Group Status.

oduSwGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.1.2.1

Indexes

oduSwGroupIfIndex

Column Syntax OID

oduSwGroupIfIndex

Index of this table.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.1

oduSwGroupNEAddress

reserved.

Enumerated Values:

0	ip
1	mac
2	client-id
3	other

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.2

txSWStatus

ODU TX SW Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.3

rxSWStatus

ODU RX SW Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.4

txSWLockInStatus

MODEM TX SW Lock-in Status

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.5

txSwReverseReqRecvStatus

MODEM TX SW Reverse Request Status.

Enumeration

Enumerated Values:

0	v1BC
1	v2E2E2stepTC
3	v2P2PTC
4	v2E2EBC
5	v2P2PBC

.1.3.6.1.4.1.119.2.3.69.501.3.1.2.1.6

modemGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.1 · 1 row entry · 21 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk modemGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::modemGroupTable'

This table represents MODEM Alarm Status information.

modemGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.1.1

Indexes

modemGroupIfIndex

Column Syntax OID

modemGroupIfIndex

Index of this table.

Enumerated Values:

0	false
1	true

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.1

modemGroupNEAddress

reserved.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.2

lof

MODEM LOF Alarm

Enumerated Values:

0	v1BC
1	v2E2E2stepTC
2	v2E2E1stepTC
3	v2P2PTC
4	v2E2EBC
5	v2P2PBC

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.3

frameID

MODEM Frame ID Alarm

Enumerated Values:

0	ieee802dot3
1	ipv4

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.4

highBERAlarm

MODEM High BER Alarm.

Enumerated Values:

-3	t128msec
-2	t256msec
-1	t512msec
0	t1sec
1	t2sec

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.5

lowBERAlarm

MODEM Low BER Alarm.

Enumerated Values:

0	t1sec
1	t2sec
2	t4sec
3	t8sec
4	t16sec
5	t32sec

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.6

earlyWarningAlarm

MODEM Early Warning Alarm

Enumerated Values:

-1	t512msec
0	t1sec
1	t2sec
2	t4sec
3	t8sec
4	t16sec
5	t32sec

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.7

modAlarm

MODEM MOD Alarm

Enumerated Values:

0	t1sec
1	t2sec
2	t4sec
3	t8sec
4	t16sec

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.8

ifCableShortAlarm

MODEM IF Cable Short Alarm

Constraints:
range: 2-10

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.9

atpcPowerMode

MODEM ATPC Power Mode Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.10

inPhaseStatus

MODEM Inphase Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.11

amrRangeMismatchobsolete

obsoleted

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.12

txModulation

MODEM TX Modulation Status

Enumeration

Enumerated Values:

0	dflt
1	alt1
2	alt2
3	alt3

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.13

rxModulation

MODEM RX Modulation Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.14

l2SyncLossAlarm

MODEM L2SYNC Loss Alarm.

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.15

rdiAlarm

MODEM RDI Alarm

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.16

uaeAlarm

MODEM UAE Alarm

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.17

unlocked

MODEM Unlocked Alarm

Enumerated Values:

0	arb
1	ptp

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.18

tempAlarmdeprecated

MODEM Temperature Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.19

tdmRangeMismatch

MODEM TDM / AMR / AMBR Range Mismatch Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.20

modemPsOff

MDOEM Power Supply Status

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.2.1.1.21

modemXpicTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk modemXpicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::modemXpicTable'

Represents XPIC Alarm and Status

modemXpicEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.2.1

Indexes

modemXpicIfIndex

Column Syntax OID

modemXpicIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.2.2.1.1

modemXpicNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.2.1.2

xIFLevelAlarm

MODEM XIF Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.2.1.3

xpicTypeMismatch

MODEM XPIC Mode Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.2.1.4

modemCardTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.3 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk modemCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::modemCardTable'

Represents MODEM Card Alarm Status.

modemCardEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.3.1

Indexes

modemCardIndex

Column Syntax OID

modemCardIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.1

modemCardNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.2

modemComFailAlarm

MODEM Communication FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.3

modemUnequipped

MODEM Unequipped Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.4

modemAlarm

MODEM Module Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.5

modemBusErrorTx

MODEM Tx Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.6

modemBusErrorRx

MODEM Rx Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.7

modemTypeMismatch

MODEM Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.8

modemCardOnlineStatus

MODEM Online Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.9

modemCardPsAlarm

MODEM Power Supply Alarm.

asModemHeaderCompressIfIndex

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.3.1.10

asModemHeaderCompressTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.4 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asModemHeaderCompressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asModemHeaderCompressTable'

Header Compression Function Status.
This table is created automatically when the Modem Card is
provisioned, if the F/W supports the new Header Compression
function.

asModemHeaderCompressEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.4.1

Indexes

Column Syntax OID

asModemHeaderCompressIfIndex

Index of this table.

asModemHeaderCompressNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.2.4.1.1

reserved.

asModemHeaderCompressMismatch

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.4.1.2

Header/Payload* Compression Mismatch Alarm.
If the configuration of local and remote header compression mode
is different, the alarm will be reported.
(*iPASOLINK VR series only)

asModemHeaderCompressCurrentMode

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.4.1.3

Current Header/Payload* Compression Mode.
This value shows same value as 'provModemHeaderCompressMode'
usually. But the value will be different from
'provModemHeaderCompressMode', when the new Header Compression
Functio…

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.4.1.4

asModemHeaderCompressVersion

The version of Header/Payload* Compression Function.
'1' means the Header Compression is not supported and the
Payload* Compression is not supported.
'2' means the Header Compression is supported and the Payload*
Compre…

asModemHeaderCompressRemoteIfIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.2.4.1.5

asModemHeaderCompressRemoteTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.5 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asModemHeaderCompressRemoteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asModemHeaderCompressRemoteTable'

Remote Modem Header Compression Function Status.
This table is created automatically when the Modem Card is
provisioned, if the F/W supports the new Header Compression
function.

asModemHeaderCompressRemoteEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.5.1

Indexes

Column Syntax OID

asModemHeaderCompressRemoteIfIndex

Index of this table.

asModemHeaderCompressRemoteNEAddress

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.2.5.1.1

reserved.

asModemHeaderCompressRemoteMode

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.5.1.2

Header/Payload* Compression Mode of Remote Modem.
When the Radio link is not established, the value will be changed
to 'unknown'.
(*iPASOLINK VR series only)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.2.5.1.3

asModemHeaderCompressRemoteVlanMode

VLAN Mode of Remote equipment.
When the Radio link is not established, the object will show the
value 'unknown'.

Enumeration

Enumerated Values:

activate

.1.3.6.1.4.1.119.2.3.69.501.3.2.5.1.4

asModemHeaderCompressRemoteVersion

The version of Header/Payload* Compression Function for the
Remote Modem.
'1' means the Header Compression is not supported and the
Payload* Compression is not supported.
'2' means the Header Compression is supported …

asModemTrafficAggrIfIndex

Enumerated Values:

0	menu
1	cli

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.2.5.1.5

asModemTrafficAggrTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.2.6 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asModemTrafficAggrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asModemTrafficAggrTable'

This table contains alarm and status object for Radio Traffic
Aggregation mode.

asModemTrafficAggrEntry row .1.3.6.1.4.1.119.2.3.69.501.3.2.6.1

Indexes

Column Syntax OID

asModemTrafficAggrIfIndex

Index of this table.

asModemTrafficAggrNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.2.6.1.1

reserved.

asModemTrafficAggrModeMismatch

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.2.6.1.2

Radio Traffic Aggregation Mode Mismatch Alarm.
This alarm is asserted if the Radio Traffic Aggregation is
configured when the H/W and/or F/W does not support the function.
And also the alarm is asserted when the configu…

asModemTrafficAggrVersion

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.2.6.1.3

The support version of Radio Traffic Aggreation function.
'5' means the physical advanced mode aggregation, physical mode
aggregation, and legacy radio traffic aggregation are
supported (valid for iPASO VR 10 on…

asModemTrafficAggrEncapStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.2.6.1.4

Radio Traffic Aggregation Encapsulation Status.
When the Modem cannot build frames continuously, the object will
assert the 'fail'.
The value will change to 'normal' if the condition is cleared.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.2.6.1.5

ctrlGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.3.1 · 1 row entry · 13 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ctrlGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::ctrlGroupTable'

Represents Main Board/Ctrl Card Alarm and Status

ctrlGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.3.1.1

Indexes

ctrlGroupIndex

Column Syntax OID

ctrlGroupIndex

Index of this table.

Enumerated Values:

1	none
2	on2off
3	off2on

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.1

ctrlGroupNEAddress

reserved.

Enumerated Values:

1	none
2	on2off
3	off2on

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.2

ctrlAlarm

Main Board / Ctrl Card Module Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.3

usbFailure

Main Board / Ctrl Card USB FAIL Alarm

Enumerated Values:

1	none
2	topologyChanged
3	topologyChangedTurboChainHead
4	topologyChangedTurboChainTail

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.4

svLineAlarm

Main Board / Ctrl Card SV Line Alarm

Enumerated Values:

1	none
2	couplingPortChanged

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.5

iduCpuAlarm

Main Board / Ctrl Card IDU CPU Alarm

Enumerated Values:

1	none
2	ringMasterChanged

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.6

iduTotalAlarm

Main Board / Ctrl Card IDU Total Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.7

maintenance

Main Board / Ctrl Card Maintenance Status.
This object shows that some maintenance functions are performed
under that equipment.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.8

busError

Main Board / Ctrl Card Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.9

memoryFailure

Main Board / Ctrl Card Memory FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.10

clk2mMount

Main Board / Ctrl Card EXT CLK Mount Status.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.11

ctrlTempAlarm

Main Board / Ctrl Card Temperature Alarm.

Enumerated Values:

0	auto
1	speed100M-Full
2	speed100M-Half
3	speed10M-Full
4	speed10M-Half

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.12

ctrlTemperature

Main Board / Ctrl Card Temperature.
if the unexpected condition happened, the object reports value
'-999'.

0.1 degreeInteger32

Enumerated Values:

0	na
1	auto
2	mdi
3	mdiX

Constraints:
range: -999--999
range: -200-900

.1.3.6.1.4.1.119.2.3.69.501.3.3.1.1.13

sncpGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.3.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk sncpGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::sncpGroupTable'

Represents E1 SNCP Status.

sncpGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.3.2.1

Indexes

sncpGroupIndex

Column Syntax OID

sncpGroupIndex

Index of this table.

Integer32

Constraints:
range: 1-2352

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.1

sncpGroupNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.2

ppsFail

Main Board / Ctrl Card PPS FAIL Alarm.

Enumerated Values:

-1	disable
0	off
1	on

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.3

sncpProtectionStatusCh1

Main Board / Ctrl Card SNCP Protection Status for Channel 1

Enumeration

Enumerated Values:

-1	na
0	speed10M-Half
1	speed10M-Full
2	speed100M-Half
3	speed100M-Full

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.4

sncpProtectionStatusCh2

Main Board / Ctrl Card SNCP Protection Status for Channel 2

Enumeration

Enumerated Values:

-1	na
0	mdi
1	mdiX

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.5

sncpOnlineStatus

Main Board / Ctrl Card SNCP Online Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.6

sncpSwStatus

Main Board / Ctrl Card SNCP Switch Status.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.119.2.3.69.501.3.3.2.1.7

auxGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.4.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk auxGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::auxGroupTable'

Represents AUX Card Alarm / Status.

auxGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.4.1.1

Indexes

auxGroupIndex

Column Syntax OID

auxGroupIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.1

auxGroupNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.2

auxUnequipped

AUX Unequipped Alarm

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.3

auxTypeMismatch

AUX Type Mismatch Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.4

auxAlarm

AUX Module Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.5

auxComFailAlarm

AUX Communication FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.6

auxBusErrorTx

AUX Tx Bus Error Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.7

auxBusErrorRx

AUX Rx Bus Error Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.4.1.1.8

clkCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.5.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk clkCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::clkCommonTable'

Represents Main Board / Ctrl Card CLK Status.

clkCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.3.5.1.1

Indexes

clkCommonIndex

Column Syntax OID

clkCommonIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.1

clkCommonNEAddress

reserved.

Enumerated Values:

0	no
1	dhcpClient
2	rarp
4	bootp

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.2

ltiAlarm

Main Board / Ctrl Card LTI Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.3

refClkChange

Main Board / Ctrl Card CLK Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.4

extClkLoop

Main Board / Ctrl Card EXT CLK Timing Loop Alarm.

timingSourceControlStatus

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.5

currentTimingSource

Main Board / Ctrl Card Current Timing Source.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.6

timingSourceCondition

Main Board / Ctrl Card Timing Source Status.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.7

Main Board / Ctrl Card Timing Source Switch Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.1.1.8

clkRefTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.5.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk clkRefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::clkRefTable'

Represents Timing Source Status.

clkRefEntry row .1.3.6.1.4.1.119.2.3.69.501.3.5.2.1

Indexes

MOXA-EDS405A_PTP-MIBtrunkIndex clkRefIndex MOXA-EDS405A_PTP-MIBtrunkPort

Column Syntax OID

clkRefIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.1

clkRefNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.2

clkFailedAlarm

Main Board / Ctrl Card CLK FAIL Alarm per CLK Reference.

Enumerated Values:

1	success
2	fail
3	standby

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.3

clkDriftAlarm

Main Board / Ctrl Card CLK Drift Alarm per CLK Reference.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.4

clkRefFailedAlarm

Main Board / Ctrl Card SSM FAIL Alarm per CLK Reference.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.5

refLockoutStatus

Main Board / Ctrl Card Lockout Status per CLK Reference.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.6

refQL

Main Board / Ctrl Card Quality level per CLK Reference.

Enumeration

Enumerated Values:

0	portDisabled
1	notTurboRingPort
2	linkDown
3	blocked
4	learning
5	forwarding

.1.3.6.1.4.1.119.2.3.69.501.3.5.2.1.7

extClkGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.6.1 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk extClkGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::extClkGroupTable'

Represents Ext CLK Alarm / Status.

extClkGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.6.1.1

Indexes

extClkGroupIndex

Column Syntax OID

extClkGroupIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.1

extClkGroupNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.2

clk2mLosAlarm

Main Board / Ctrl Card EXT CLK LOS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.3

aisAlarm

Main Board / Ctrl Card EXT CLK AIS Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.4

lofAlarm

Main Board / Ctrl Card EXT CLK LOF Alarm.

Enumerated Values:

0	priority0
16	priority16
32	priority32
48	priority48
64	priority64
80	priority80
96	priority96
112	priority112
128	priority128
144	priority144
160	priority160
176	priority176
192	priority192
208	priority208
224	priority224
240	priority240

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.5

clk2mUnequipped

Main Board / Ctrl Card EXT CLK Unequipped Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.6

extClkOutputStatus

Main Board / Ctrl Card EXT CLK Output Status.

Enumeration

Enumerated Values:

0	portDisabled
1	notSpanningTreePort
2	linkDown
3	blocked
4	learning
5	forwarding

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.7

extClkOutputQlValue

Main Board / Ctrl Card EXT CLK Quality Level.

Enumeration

Enumerated Values:

0	auto
1	forceEdge
2	false

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.8

squelch

Main Board / Ctrl Card EXT CLK Squelch Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.9

clk2mTypeMismatch

Main Board / Ctrl Card EXT CLK Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.6.1.1.10

fanGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.7.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk fanGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::fanGroupTable'

Represents FAN Card Alarm / Status.

fanGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.7.1.1

Indexes

fanGroupIndex

Column Syntax OID

fanGroupIndex

Index of this table.

Enumerated Values:

0	no
1	yes

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.7.1.1.1

fanGroupNEAddress

reserved.

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.7.1.1.2

fanAlarm

FAN FAIL Alarm.

Enumerated Values:

0	not-triggered
1	triggered

.1.3.6.1.4.1.119.2.3.69.501.3.7.1.1.3

fanUnequipped

FAN Unequipped Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.7.1.1.4

psGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk psGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::psGroupTable'

Represents Main Board / Ctrl Card Power Supply Alarm / Status.

psGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.8.1.1

Indexes

psGroupIndex

Column Syntax OID

psGroupIndex

Index of this table.

Enumerated Values:

0	not-triggered
1	triggered

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.8.1.1.1

psGroupNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.8.1.1.2

psPowerSupply

Main Board / Ctrl Card Power Supply Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.8.1.1.3

psUnequipped

Main Board / Ctrl Card Power Supply Unequipped Alarm.

tcn15minDataModemIfIndex tcn15minDataModemMonitorName

Enumerated Values:

0	ignore
1	on2off
2	off2on

.1.3.6.1.4.1.119.2.3.69.501.3.8.1.1.4

tcn15minDataRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataRadioTable'

Represents Threashold Crossing Alarm Status of 15 minutes PMON
for Radio.

tcn15minDataRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.1.1.1

Indexes

Column Syntax OID

tcn15minDataModemIfIndex

Index of this table.

tcn15minDataModemMonitorName

Enumerated Values:

0	not-triggered
1	triggered

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.1.1.2

tcn15minDataRadioNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.1.1.3

tcn15minDataRf

TCN MODEM 15 minutes RF Monitoring Alarm per counting item.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.1.1.4

tcn15minRxLevTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minRxLevTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minRxLevTable'

Represents Threshold Crossing Alarm Status of 15 minutes Rx
Level Alarm.

tcn15minRxLevEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.1.2.1

Indexes

tcn15minRxLevIfIndex

Column Syntax OID

tcn15minRxLevIfIndex

Index of this table.

Enumerated Values:

0	no
1	yes

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.2.1.1

tcn15minRxLevNEAddress

reserved.

Enumerated Values:

0	priority0
1	priority1
2	priority2
3	priority3
4	priority4
5	priority5
6	priority6
7	priority7

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.2.1.2

tcn15minRxLev

TCN MODEM 15 minutes RX Level (Min) Alarm.

tcn15minDataTmRsIfIndex tcn15minDataTmRsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.1.2.1.3

tcn15minDataTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataTmRsTable'

Represents Threshold Crossing Alarm of 15 minutes PMON for RS
Layer of through mode STM-1.

tcn15minDataTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1.1

Indexes

Column Syntax OID

tcn15minDataTmRsIfIndex

Index of this table.

tcn15minDataTmRsMonitorName

Enumerated Values:

0	low
1	normal
2	medium
3	high

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1.1.2

tcn15minDataTmRsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1.1.3

tcn15minDataTmRs

TCN STM-1 15 minutes (Through Mode) RS Monitoring Alarm.

tcn15minDataTmDMRRsIfIndex tcn15minDataTmDMRRsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.1.1.4

tcn15minDataTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataTmDMRRsTable'

Represents Threshold Crossing Alarm of 15 minutes PMON for DMR
RS Layer of STM-1

tcn15minDataTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2.1

Indexes

Column Syntax OID

tcn15minDataTmDMRRsIfIndex

Index of this table.

tcn15minDataTmDMRRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2.1.1

Index of this table. The index value shows counting item.

Enumeration

Enumerated Values:

0	access
1	trunk
2	hybrid

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2.1.2

tcn15minDataTmDMRRsNEAddress

reserved.

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2.1.3

tcn15minDataTmDMRRs

TCN STM-1 15 minutes (Through Mode)DMR RS Monitoring Alarm.

tcn15minDataChRsIfIndex tcn15minDataChRsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.1.2.1.4

tcn15minDataChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataChRsTable'

Represents Threshold Crossing Alarm of 15 minutes PMON for
Channelized Mode RS Layer of STM-1.

tcn15minDataChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1.1

Indexes

Column Syntax OID

tcn15minDataChRsIfIndex

Index of this table.

tcn15minDataChRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1.1.2

tcn15minDataChRsNEAddress

reserved.

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1.1.3

tcn15minDataChRs

TCN STM-1 15 minutes (Channelized Mode) RS Monitoring Alarm per
counting item.

tcn15minDataChMsIfIndex tcn15minDataChMsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.1.1.4

tcn15minDataChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataChMsTable'

Represents Threshold Crossing Alarm of 15 minutes PMON for
Channelized Mode MS Layer of STM-1.

tcn15minDataChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2.1

Indexes

Column Syntax OID

tcn15minDataChMsIfIndex

Index of this table.

tcn15minDataChMsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2.1.2

tcn15minDataChMsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2.1.3

tcn15minDataChMs

TCN STM-1 15 minutes (Channelized Mode) MS Monitoring Alarm.

MOXA-EDS405A_PTP-MIBvlanId tcn15minData16E1PdhIfIndex tcn15minData16E1PdhMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.2.2.1.4

tcn15minData16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minData16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minData16E1PdhTable'

Represents Threshold Crossing Alarm of 15 minutes PMON for E1
Channel.

tcn15minData16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1.1

Indexes

Column Syntax OID

tcn15minData16E1PdhIfIndex

Index of this table.

tcn15minData16E1PdhMonitorName

Enumerated Values:

0	disable
1	enable

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1.1.1

Index of this table. The index value shows counting item.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1.1.2

tcn15minData16E1PdhNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1.1.3

tcn15minData16E1Pdh

TCN 15 minutes E1 CV Alarm.

MOXA-EDS405A_PTP-MIBstaticMulticastAddress tcn1dayDataModemIfIndex tcn1dayDataModemMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.2.3.1.1.4

tcn1dayDataRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataRadioTable'

Represents Threashold Crossing Alarm Status of 1 day PMON for
Radio.

tcn1dayDataRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.3.1.1

Indexes

Column Syntax OID

tcn1dayDataModemIfIndex

Index of this table.

tcn1dayDataModemMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.1.1.2

tcn1dayDataRadioNEAddress

reserved.

Enumerated Values:

1	active
4	createAndGo
5	createAndWait
6	destroy

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.1.1.3

tcn1dayDataRf

TCN MODEM 1 day RF Monitoring Alarm per counting item.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.1.1.4

tcn1dayRxLevTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayRxLevTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayRxLevTable'

Represents Threshold Crossing Alarm Status of 1 day Rx Level
Alarm.

tcn1dayRxLevEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.3.2.1

Indexes

tcn1dayRxLevIfIndex

Column Syntax OID

tcn1dayRxLevIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.2.1.1

tcn1dayRxLevNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.2.1.2

tcn1dayRxLev

TCN MODEM 1 day RX Level (Min) Alarm.

tcn1dayDataTmRsIfIndex tcn1dayDataTmRsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.3.2.1.3

tcn1dayDataTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataTmRsTable'

Represents Threshold Crossing Alarm of 1 day PMON for RS Layer
of through mode STM-1.

tcn1dayDataTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1.1

Indexes

Column Syntax OID

tcn1dayDataTmRsIfIndex

Index of this table.

tcn1dayDataTmRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1.1.2

tcn1dayDataTmRsNEAddress

reserved.

Enumerated Values:

0	all
1	bmucast
2	bmcast
3	bcast

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1.1.3

tcn1dayDataTmRs

TCN STM-1 1 day (Through Mode) RS Monitoring Alarm.

tcn1dayDataTmDMRRsIfIndex tcn1dayDataTmDMRRsMonitorName

Enumerated Values:

0	notlimit
1	limit128k
2	limit256k
3	limit512k
4	limit1M
5	limit2M
6	limit4M
7	limit8M

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.1.1.4

tcn1dayDataTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataTmDMRRsTable'

Represents Threshold Crossing Alarm of 1 day PMON for DMR RS
Layer of STM-1

tcn1dayDataTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2.1

Indexes

Column Syntax OID

tcn1dayDataTmDMRRsIfIndex

Index of this table.

tcn1dayDataTmDMRRsMonitorName

Enumerated Values:

0	notlimit
1	limit128k
2	limit256k
3	limit512k
4	limit1M
5	limit2M
6	limit4M
7	limit8M
8	limit16M
9	limit32M
10	limit64M

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2.1.1

Index of this table. The index value shows counting item.

Enumeration

Enumerated Values:

0	notlimited
1	percentage03
2	percentage05
3	percentage10
4	percentage15
5	percentage25
6	percentage35
7	percentage50
8	percentage65
9	percentage85

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2.1.2

tcn1dayDataTmDMRRsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2.1.3

tcn1dayDataTmDMRRs

TCN STM-1 1 day (Through Mode)DMR RS Monitoring Alarm.

tcn1dayDataChRsIfIndex tcn1dayDataChRsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.1.2.1.4

tcn1dayDataChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataChRsTable'

Represents Threshold Crossing Alarm of 1 day PMON for
Channelized Mode RS Layer of STM-1.

tcn1dayDataChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1.1

Indexes

Column Syntax OID

tcn1dayDataChRsIfIndex

Index of this table.

tcn1dayDataChRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1.1.1

Index of this table. The index value shows counting item.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1.1.2

tcn1dayDataChRsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1.1.3

tcn1dayDataChRs

TCN STM-1 1 day (Channelized Mode) RS Monitoring Alarm per
counting item.

tcn1dayDataChMsIfIndex tcn1dayDataChMsMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.1.1.4

tcn1dayDataChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataChMsTable'

Represents Threshold Crossing Alarm of 1 day PMON for
Channelized Mode MS Layer of STM-1.

tcn1dayDataChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2.1

Indexes

Column Syntax OID

tcn1dayDataChMsIfIndex

Index of this table.

tcn1dayDataChMsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2.1.2

tcn1dayDataChMsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2.1.3

tcn1dayDataChMs

TCN STM-1 1 day (Channelized Mode) MS Monitoring Alarm.

tcn1dayData16E1PdhIfIndex tcn1dayData16E1PdhMonitorName

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.2.2.1.4

tcn1dayData16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayData16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayData16E1PdhTable'

Represents Threshold Crossing Alarm of 1 day PMON for E1
Channel.

tcn1dayData16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1.1

Indexes

Column Syntax OID

tcn1dayData16E1PdhIfIndex

Index of this table.

tcn1dayData16E1PdhMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1.1.1

Index of this table. The index value shows counting item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1.1.2

tcn1dayData16E1PdhNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1.1.3

tcn1dayData16E1Pdh

TCN 1 day E1 CV Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.4.3.1.1.4

tcn15minDataRmonTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn15minDataRmonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn15minDataRmonTable'

Represents Threshold Crossing Alarm of 15 minutes RMON for
Ethernet Port.

tcn15minDataRmonEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1

Indexes

tcn15minRmonIfIndex

Column Syntax OID

tcn15minRmonIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.1

tcn15minRmonNEAddress

reserved.

tcn15minHCRxEthStatsDropEvents

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.2

RMON(Ethernet Port) TCN 15 minutes RX Drop Events Alarm

tcn15minHCRxEthStatsUndersizePkts

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.3

RMON(Ethernet Port) TCN 15 minutes RX Undersize Packets Alarm.

tcn15minHCRxEthStatsFragments

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.4

RMON(Ethernet Port) TCN 15 minutes RX Fragments Alarm.

tcn15minHCRxEthStatsCRCAlignErrors

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.5

RMON(Ethernet Port) TCN 15 minutes RX CRC Alignment Errors
Alarm.

tcn15minHCRxEthStatsOversizePkts

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.6

RMON(Ethernet Port) TCN 15 minutes RX Oversize Packets Alarm.

tcn15minHCTxEthStatsCollisions

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.7

RMON(Ethernet Port) TCN 15 minutes TX Collisions Alarm.

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.119.2.3.69.501.3.9.5.1.1.8

tcn1dayDataRmonTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk tcn1dayDataRmonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::tcn1dayDataRmonTable'

Represents Threshold Crossing Alarm of 1 day RMON for Ethernet
Port

tcn1dayDataRmonEntry row .1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1

Indexes

tcn1dayRmonIfIndex

Column Syntax OID

tcn1dayRmonIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.1

tcn1dayRmonNEAddress

reserved.

tcn1dayHCRxEthStatsDropEvents

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.2

RMON(Ethernet Port) TCN 1 day RX Drop Events Alarm

tcn1dayHCRxEthStatsUndersizePkts

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.3

RMON(Ethernet Port) TCN 1 day RX Undersize Packets Alarm.

tcn1dayHCRxEthStatsFragments

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.4

RMON(Ethernet Port) TCN 1 day RX Fragments Alarm.

tcn1dayHCRxEthStatsCRCAlignErrors

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.5

RMON(Ethernet Port) TCN 1 day RX CRC Alignment Errors Alarm.

tcn1dayHCRxEthStatsOversizePkts

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.6

RMON(Ethernet Port) TCN 1 day RX Oversize Packets Alarm.

tcn1dayHCTxEthStatsCollisions

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.7

RMON(Ethernet Port) TCN 1 day TX Collisions Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.9.6.1.1.8

hkInputStatusTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.10.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk hkInputStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::hkInputStatusTable'

AUX HK Input Status

hkInputStatusEntry row .1.3.6.1.4.1.119.2.3.69.501.3.10.1.1

Indexes

hkInputStatusIndex

Column Syntax OID

hkInputStatusIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.10.1.1.1

hkInputStatusNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.10.1.1.2

hkInputAlarm

AUX HK IN Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.10.1.1.3

hkInputStatus

AUX HK IN Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.10.1.1.4

hkOutputStatusTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.10.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk hkOutputStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::hkOutputStatusTable'

AUX HK Output Status

hkOutputStatusEntry row .1.3.6.1.4.1.119.2.3.69.501.3.10.2.1

Indexes

hkOutputStatusIndex

Column Syntax OID

hkOutputStatusIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.10.2.1.1

hkOutputStatusNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.10.2.1.2

hkOutputStatusValue

AUX HK OUT Status

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.10.2.1.3

clusterAlarmInTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.10.3.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk clusterAlarmInTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::clusterAlarmInTable'

Represents Cluster Alarm Input (Cluster Alarm to Peer Equipment)
Status

clusterAlarmInEntry row .1.3.6.1.4.1.119.2.3.69.501.3.10.3.1.1

Indexes

clusterAlarmInIfIndex

Column	Syntax	OID
clusterAlarmInIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.1.1.1`
clusterAlarmInNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.1.1.2`
clusterAlarmInStatus Cluster Alarm Input Status.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.1.1.3`

clusterAlarmOutTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.10.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk clusterAlarmOutTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::clusterAlarmOutTable'

Represents Cluster Alarm Output (Cluster Alarm from Peer
Equipment) Status

clusterAlarmOutEntry row .1.3.6.1.4.1.119.2.3.69.501.3.10.3.2.1

Indexes

clusterAlarmOutIndex

Column	Syntax	OID
clusterAlarmOutIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.2.1.1`
clusterAlarmOutNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.2.1.2`
clusterAlarmOutStatus MODEM Cluster Alarm Out.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.10.3.2.1.3`

asStm1ChPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.11.1 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asStm1ChPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asStm1ChPortTable'

Alarm / Status Information of STM-1 Channelized Mode. This table
is not used when the STM-1 Port is running on Through Mode.

asStm1ChPortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.11.1.1

Indexes

asStm1ChPortIfIndex

Column Syntax OID

asStm1ChPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.1

asStm1ChPortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.2

msAisAlarm

STM-1 MS AIS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.3

msRdiAlarm

STM-1 MS RDI Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.4

pjeStatus

STM-1 PJE Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.5

auAisAlarm

STM-1 AU AIS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.6

auLopAlarm

STM-1 AU LOP Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.7

hpUnequipedAlarm

STM-1 HP UNEQ Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.8

hpTimAlarm

STM-1 HP TIM Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.9

hpPlmAlarm

STM-1 HP PLM Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.10

hpRdiAlarm

STM-1 HP RDI Alarm

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.11

lomAlarm

STM-1 LOM Alarm.

higherOrderPathTraceReceivedValue

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.12

STM-1 HP Trace Received Value.

lowerOrderPathTraceReceivedValue

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.13

STM-1 LP Trace Received Value.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.3.11.1.1.14

asStm1PortTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.11.2 · 1 row entry · 16 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asStm1PortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asStm1PortTable'

Alarm / Status Information of STM-1 Interface.

asStm1PortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.11.2.1

Indexes

asStm1PortIfIndex

Column Syntax OID

asStm1PortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.1

asStm1PortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.2

portTypeMismatchAlarm

STM-1 SFP Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.3

portRemovedAlarm

STM-1 SFP Removed Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.4

stm1LosAlarm

STM-1 LOS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.5

tfAlarm

STM-1 Transmit FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.6

rsLofAlarm

STM-1 RS LOF Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.7

rsTimAlarm

STM-1 RS TIM Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.8

rsExcAlarm

STM-1 RS EXC Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.9

rsDegAlarm

STM-1 RS DEG Alarm.

sectionTraceReceivedValue

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.10

rsUasStatus

STM-1 RS UAS Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.11

STM-1 Section Trace Received Value.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.12

alsStatus

STM-1 ALS Status

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.13

sdhAisGenStatus

STM-1 AIS Generated Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.14

stm1LoopbackStatus

STM-1 Loopback Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.15

stm1LaserShutdownStatus

STM-1 Laser Shutdown status.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.3.11.2.1.16

asStm1ChTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.11.3 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asStm1ChTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asStm1ChTable'

Alarm / Status Information of STM-1 Channelized. This table is
created per E1 channel allocated to the STM-1 interface.

asStm1ChEntry row .1.3.6.1.4.1.119.2.3.69.501.3.11.3.1

Indexes

asStm1ChIfIndex

Column Syntax OID

asStm1ChIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.1

asStm1ChNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.2

tuAisAlarm

STM-1 TU AIS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.3

tuLopAlarm

STM-1 TU LOP Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.4

lpUnequipedAlarm

STM-1 LP UNEQ Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.5

lpRdiAlarm

STM-1 LP RDI Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.6

lpPlmAlarm

STM-1 LP PLM Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.7

slpAisGenStatus

STM-1 E1 AIS Generated Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.11.3.1.8

asStm1CardTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.11.4 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asStm1CardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asStm1CardTable'

Alarm / Status information of STM-1 Card.

asStm1CardEntry row .1.3.6.1.4.1.119.2.3.69.501.3.11.4.1

Indexes

asStm1CardIndex

Column Syntax OID

asStm1CardIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.1

asStm1CardNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.2

stm1Alarm

STM-1 Module Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.3

stm1ComFailAlarm

STM-1 Communication FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.4

stm1Unequipped

STM-1 Unequipped Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.5

stm1TypeMismatch

STM-1 Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.6

stm1BusErrorTx

STM-1 TX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.7

stm1BusErrorRx

STM-1 RX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.11.4.1.8

asE1CardTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.12.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asE1CardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asE1CardTable'

Alarm / Status information of 16E1 Card.

asE1CardEntry row .1.3.6.1.4.1.119.2.3.69.501.3.12.1.1

Indexes

asE1CardIndex

Column Syntax OID

asE1CardIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.1

asE1CardNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.2

e1Alarm

16E1 Module Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.3

e1ComFailAlarm

16E1 Communication FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.4

e1Unequipped

16E1 Unequipped Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.5

e1TypeMismatch

16E1 Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.6

e1BusErrorTx

16E1 TX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.7

e1BusErrorRx

16E1 RX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.1.1.8

asE1ChTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.12.2 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asE1ChTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asE1ChTable'

Alarm / Status information of E1 Channel.

asE1ChEntry row .1.3.6.1.4.1.119.2.3.69.501.3.12.2.1

Indexes

asE1ChIfIndex

Column Syntax OID

asE1ChIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.1

asE1ChNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.2

chUsageAlarm

E1 Channel Usage Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.3

e1LosAlarm

E1 Channel LOS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.4

ppiAisAlarm

E1 Channel AIS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.5

e1AisGenStatus

E1 Channel AIS Generated Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.6

e1LoopbackStatus

E1 Channel Loopback Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.7

ppiAisStatus

E1 Channel AIS Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.12.2.1.8

asRstpBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asRstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asRstpBridgeTable'

Alarm / Status information of RSTP.

asRstpBridgeEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.2.1.1

Indexes

asRstpBridgeIndex

Column	Syntax	OID
asRstpBridgeIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.2.1.1.1`
asRstpBridgeNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.2.1.1.2`
asRstpBridgeDesignatedRoot The bridge identifier of the root of the spanning tree.	BRIDGE-MIBBridgeId Type Constraints: `range: 8`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.2.1.1.3`
asRstpBridgeTopChanges RSTP Topology Changed Status. The total number of topology chagnes detected by this bridge since the equipment was last initialized.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.2.1.1.4`

asRstpPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asRstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asRstpPortTable'

Alarm / Status information of RSTP per Ethernet Port.

asRstpPortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1

Indexes

asRstpIfIndex

Column Syntax OID

asRstpIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.1

asRstpPortNEAddress

reserved.

asRstpPortNewRootBridgeDetectedBridgePriority

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.2

asRstpPortRole

RSTP Port Role. The port's current state, as defined by
application of the Spanning Tree Protocol. This state controls
what action a port takes on reception of a frame.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.3

asRstpPortState

RSTP Port Status. The port's current state, as defined by
application of the Spanning Tree Protocol. This state controls
what action a port takes on reception of a frame.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.4

RSTP New Bridge Detect Status. The unique Bridge Identifier of
the Bridge recorded as the Root in the Configuration BPDUs.

BRIDGE-MIBBridgeId

Type Constraints:
range: 8

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.5

asRstpPortProtocolMigrationVersion

RSTP Protocol Migration. The port's operating protocol version.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.6

asRstpPortPathCost

The port's path cost, defined by application depends on its port
speed.

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.7

asRstpPortInvalidBpduCause

RSTP Invalid BPDU Received. The event status of invalid BPDU
received.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.8

asRstpPortDesignatedCost

The path cost of the Designated Port of the segment connected to
this port.

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.9

asRstpPortDesignatedBridge

The bridge identifier of the bridge that this port considers to
be the designated Bridge for this port's segment.

BRIDGE-MIBBridgeId

Type Constraints:
range: 8

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.10

asRstpPortDesignatedPort

The port identifier of the port on the designated bridge for
this port's segment.

OctetString

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.11

asRstpPortForwardTransitions

The number of times this port has transitioned from the learning
state to the forwarding state.

asRstpPortOperPointToPoint

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.12

asRstpPortOperEdgePort

The operational value of the edge port parameter. This object is
initialized to 'alarmOff'. This object will be changed to
'alarmOn' on reception of a BPDU if the corresponding
'provRstpExtPortAdminEdgePort' is set to '…

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.13

The operational value of the point-to-point port parameter.

EnableDisableValue

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.3.13.2.2.1.14

asEthOamMepCcmFaultTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asEthOamMepCcmFaultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asEthOamMepCcmFaultTable'

ETH-CC Fault Management Table

asEthOamMepCcmFaultEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1

Indexes

asEthOamMepCcmIndex

Column Syntax OID

asEthOamMepCcmIndex

Index of this table.

asEthOamMepCcmFaultNEAddress

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.2

asEthOamMepCcmLOC

ETH-OAM LOC Alarm. The MEP is not receiveing valid CCM from at
least one of the remote MEP.

asEthOamMepCcmRdiReceived

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.3

ETH-OAM RDI Alarm. A remote MEP is reported the RDI in is last
CCM.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.4

asEthOamMepCcmMismergeConditionobsolete

obsoleted

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.5

asEthOamMepCcmUnexpectedMepConditionobsolete

obsoleted

asEthOamMepCcmDbPeerMepIndex

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.1.1.6

asEthOamMepCcmDbTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asEthOamMepCcmDbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asEthOamMepCcmDbTable'

ETH-CCM Database Table

asEthOamMepCcmDbEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1

Indexes

Column Syntax OID

asEthOamMepCcmDbPeerMepIndex

Index of this table.

asEthOamMepCcmDbNEAddress

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.2

asEthOamMepCcmDbMepIndex

Administrative Mep Index of own MEP.

asEthOamMepCcmDbPeerMepId

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.3

this object represents protocol sense MEP ID of peer MEP.

Integer32

Constraints:
range: 0-8191

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.4

asEthOamMepCcmDbMepId

this object represents protocol sense MEP ID of local MEP.

Integer32

Constraints:
range: 0-8191

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.5

asEthOamMepCcmDbCondition

This object represents the status of LOC detection per Peer
MEP.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.6

asEthOamMepCcmDbRdiReceived

This object represents the status of RDI receive status per peer
MEP.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.2.1.7

asEthOamMegCcmFaultTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asEthOamMegCcmFaultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asEthOamMegCcmFaultTable'

ETH-CC Fault Management Table(MEG)

asEthOamMegCcmFaultEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3.1

Indexes

asEthOamMegCcmIndex

Column Syntax OID

asEthOamMegCcmIndex

Index of this table.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3.1.1

asEthOamMegCcmFaultNEAddress

reserved.

asEthOamMegCcmMismergeCondition

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3.1.2

ETH-OAM Mismerge Alarm. The MEP received a CCM frame with
correct MEG level but an incorrect MEG ID (Maintenance Domain
Name).

asEthOamMegCcmUnexpectedMepCondition

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3.1.3

ETH-OAM Unexpected MEP Alarm. The MEP Received a CCM frame with
the correct MEG level and MEG ID, but unexpected MEP ID.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.1.3.1.4

asEthOamAisTable

table obsolete

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asEthOamAisTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asEthOamAisTable'

ETH-AIS Status Table

asEthOamAisEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1.1

Indexes

asEthOamAisMepIndex

Column Syntax OID

asEthOamAisMepIndexobsolete

Index of this table.

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1.1.1

asEthOamAisNEAddressobsolete

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1.1.2

asEthOamAisConditionobsolete

obsoleted

asLlfReceiveInfoIfIndex asLlfReceiveInfoGroupIndex

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1.1.3

asEthOamAisPeriodobsolete

obsoleted

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.3.2.1.1.4

asFdbEquipmentTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.6.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asFdbEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asFdbEquipmentTable'

Forwarding Database Status per Equipment.

asFdbEquipmentEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.6.1.1

Indexes

asFdbEquipmentIndex

Column	Syntax	OID
asFdbEquipmentIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.1.1.1`
asFdbEquipmentNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.1.1.2`
asFdbEquipmentLearningCount Total FDB Dynamic Entry Count. the number of forwarding entries which is learned currently.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.1.1.3`
asFdbEquipmentLearningLimitOver Total FDB Full. learning limit status. When 'asFdbEquipmentLearningCount' reaches 'provFdbEquipmentNumberOfLearningEntry', this object will be changed to 'reached'.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.1.1.4`

asFdbPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.6.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asFdbPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asFdbPortTable'

asFdbPortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.6.2.1

Forwarding Database Status per port.

Indexes

asFdbPortIfIndex

Column	Syntax	OID
asFdbPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.2.1.1`
asFdbPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.2.1.2`
asFdbPortLearningCount FDB Dynamic Entry Count. The number of forwarding entries which is learned currently.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.2.1.3`
asFdbPortLearningLimitOver FDB Full. learning limit status. When 'asFdbPortLearningCount' reaches corresponding 'provFdbPortLearningLimit', this object will be changed to 'reached'.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.2.1.4`

asFdbVlanTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.6.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asFdbVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asFdbVlanTable'

Forwarding Database status per VLAN.

asFdbVlanEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.6.3.1

Indexes

asFdbVlanIndex

Column	Syntax	OID
asFdbVlanIndex Index of this table.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.3.1.1`
asFdbVlanNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.3.1.2`
asFdbVlanLearningCount FDB Dynamic Entry Count per VLAN. The number of forwarding entries which is learned currently.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.3.1.3`
asFdbVlanLearningLimitOver FDB Full Per VLAN. Learning limit status. When 'asFdbVlanLearningCount' reaches corresponding 'provFdbVlanNumberOfLearningEntry', this object will be changed to 'reached'.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.6.3.1.4`

asLlfGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.7.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asLlfGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asLlfGroupTable'

Link Loss Forwarding(LLF) Status per LLF Group.

asLlfGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.7.1.1

Indexes

asLlfGroupIndex

Column	Syntax	OID
asLlfGroupIndex Index of this table.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.1.1.1`
asLlfGroupNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.1.1.2`
asLlfGroupForceClose LLF close status. 'forceclose' means that edge port which is assigned to the LLF group is closed because of LLF.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.1.1.3`
asLlfGroupTimeout LLF Timeout Status. The periodic LLF messages is not received.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.1.1.4`

asLlfReceiveInfoTable

table obsolete

.1.3.6.1.4.1.119.2.3.69.501.3.13.7.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asLlfReceiveInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asLlfReceiveInfoTable'

Link Loss Forwarding (LLF) Status per port.

asLlfReceiveInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.7.2.1

Indexes

Column	Syntax	OID
asLlfReceiveInfoIfIndexobsolete Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.2.1.1`
asLlfReceiveInfoGroupIndexobsolete Index of this table.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.2.1.2`
asLlfReceiveInfoNEAddressobsolete reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.2.1.3`
asLlfReceiveInfoLinkStsobsolete LLF Link Information which is received from peer.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.13.7.2.1.4`

asETHPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asETHPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asETHPortTable'

Ethernet Port Status Table.

asETHPortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1

Indexes

asETHPortIfIndex

Column Syntax OID

asETHPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.1

asETHPortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.2

asETHPortInterfaceType

GbE SFP Port Type Status. This object represents interface type
which is installed currently.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.3

asETHPortSpeedDuplex

GbE Speed & Duplex Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.4

asETHPortFlowControl

GbE Flow Control Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.5

asETHPortMDIMDIX

GbE MDI / MDI-X Status.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.6

asETHPortLinkStatus

GbE LAN Link Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.7

asETHPortAdminStatus

GbE LLF Status. When the port is closed by LLF, the object will
be changed to 'force'.
But if 'provLlfPortMode' is configured to 'edgeOamSend', this
object will be changed to 'oamSend' when the port is controlled
by LLF.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.8

asETHPortSFPEquip

GbE SFP Removed Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.9

asETHPortSFPLos

GbE ETH LOS Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.10

asETHPortSFPTxError

GbE ETH TF (Transmit FAIL) Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.11

asETHPortSFPTypeMismatch

GbE SFP Type Mismatch Alarm. This object reports that the
provisioned interface type and the installed media type are
inconsistent.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.12

asETHPortOperStatus

GbE ETH LAN Link Status. This object is not suppressed by the
lower layer alarms.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.13

asETHPortLlfOamReceived

GbE LLF message receive status.
When the port received LLF request messages, the object will
return the value 'receive'.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.3.13.8.1.1.14

asSyncETHTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.9.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asSyncETHTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asSyncETHTable'

Sync Ethernet Status table.

asSyncETHEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.9.2.1

Indexes

asSyncETHIfIndex

Column	Syntax	OID
asSyncETHIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.13.9.2.1.1`
asSyncETHNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.9.2.1.2`
asSyncETHPortCLKSts Sync ETH Port CLK Status.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.9.2.1.3`

asQosTable

table obsolete

.1.3.6.1.4.1.119.2.3.69.501.3.13.10.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asQosTable'

Qos Information per port.

asQosEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.10.1.1

Indexes

asQosPortindex

Column	Syntax	OID
asQosPortindexobsolete Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.13.10.1.1.1`
asQosNEAddressobsolete reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.10.1.1.2`
asQosAmrBandWidthobsolete The value of Qos bandwidth which is determined by the smaller value of the followings. AMR bandwidth - E1 bandwidth - total EIR bandwidth. Or AMR bandwidth - E1 bandwidth - total CIR bandwidth.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.13.10.1.1.3`

asETHCardTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asETHCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asETHCardTable'

ETH Card Status table.

asETHCardEntry row .1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1

Indexes

asETHCardIndex

Column Syntax OID

asETHCardIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.1

asETHCardNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.2

ethAlarm

GbE Module Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.3

ethComFailAlarm

GbE Communication FAIL Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.4

ethUnequipped

GbE Unequipped Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.5

ethTypeMismatch

GbE Type Mismatch Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.6

ethBusErrorTx

GbE TX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.7

ethBusErrorRx

GbE RX Bus Error Alarm.

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.13.32.1.1.8

iduCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.14.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk iduCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::iduCommonTable'

Equipment Configuration Status Table.

iduCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.3.14.1.1

Indexes

iduCommonIndex

Column	Syntax	OID
iduCommonIndex Index of this table.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.14.1.1.1`
iduCommonNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.14.1.1.2`
equipConfigStatus Equipment Configuration Status. The object is used for determining the status synchronization method for the manager entity.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.14.1.1.3`

asCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.14.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asCommonTable'

Installed Card Status table.

asCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.3.14.2.1

Indexes

asCommonIndex

Column	Syntax	OID
asCommonIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.1`
asCommonNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.2`
asUserInterface Installed card type.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.3`
asConfigStatus Configuration status of installed card. The value is determined from provisioned card type and installed card type.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.4`
asClk2mType Installed CLK type.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.5`
asClk2mConfigStatus Configuration status of CLK card. The value is determined from provisioned CLK type and installed CLK type.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.14.2.1.6`

asStm1ApsTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.33.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asStm1ApsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asStm1ApsTable'

APS Status Table. This table is created automatically when the
APS is configured.

asStm1ApsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.33.1.1

Indexes

asStm1ApsIfIndex

Column	Syntax	OID
asStm1ApsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.1`
asStm1ApsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.2`
apsProtectionStatusCh1 APS Protection Status for Ch1	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.3`
apsProtectionStatusCh2 APS Protection Status for Ch2	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.4`
apsOnlineStatus APS Online Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.5`
apsLockinStatus APS Lockin Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.6`
apsSwStatus APS Switch Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.3.33.1.1.7`

asLicenseAlarmTable

table

.1.3.6.1.4.1.119.2.3.69.501.3.45.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk asLicenseAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::asLicenseAlarmTable'

License Alarm Table.

asLicenseAlarmEntry row .1.3.6.1.4.1.119.2.3.69.501.3.45.1.1

Indexes

asLicenseAlarmIndex

Column Syntax OID

asLicenseAlarmIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.3.45.1.1.1

asLicenseAlarmNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.3.45.1.1.2

asLicenseAlarm

License Alarm.
The alarm will be asserted when the configuration and install
license are mismatch. The following operations can be trigger the
alarm.
- license downgrade
- multiple chassis configuration (2U XPIC)
Th…

Type Values:

1	cleared
2	indetermine
3	critical
4	major
5	minor
6	warning

.1.3.6.1.4.1.119.2.3.69.501.3.45.1.1.3

esCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.4.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk esCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::esCommonTable'

Configure Card information.

esCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.4.1.1

The entries are created automatically per each slot when the
agent boots.

Indexes

esCommonIndex

Column	Syntax	OID
esCommonIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.4.1.1.1`
esCommonNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.4.1.1.2`
esUserInterface Equipment Configuration. This object configures card type to use. If the object is set to 'notUsed' from other value, the related objects are automatically removed. For example, the crossconnect whose end point is locat…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.4.1.1.3`
esClk2mType EXT CLK Type. This object configures Clock card information. This object is available only for SLOT whose card type is ctrl.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.4.1.1.4`

esModemTable

table

.1.3.6.1.4.1.119.2.3.69.501.4.2 · 1 row entry · 43 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk esModemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::esModemTable'

Configure Radio Parameters.

esModemEntry row .1.3.6.1.4.1.119.2.3.69.501.4.2.1

Indexes

esModemIfIndex

Column Syntax OID

esModemIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.1

esModemNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.2

esModemTxFreq

Tx RF Frequency.

OctetStringr/w

Constraints:
range: 1-9

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.3

esModemRxFreq

Rx RF Frequency.

OctetStringr/w

Constraints:
range: 1-9

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.4

esModemTxPowerCont

Tx Power Control.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.5

esModemFrameID

Frame ID.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.6

esModemModulation

Reference Modulation.
If the provisioned card does not support the specified modulation
or the installed license is not enough, the agent will reject the
request.
When this parameter changes, the agent will adjust the E…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.7

esModemChSpacing

Channel Spacing.
If the card does not support the specified parameter, the agent
will reject the request.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs w…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.8

esModemAmrOperation

AMR Operation.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.9

esModemAmrRangeQPSK

AMR Range (QPSK).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.10

esModemAmrRange16QAM

AMR Ragne (16QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.11

esModemAmrRange32QAM

AMR Range (32QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.12

esModemAmrRange64QAM

AMR Range (64QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.13

esModemAmrRange128QAM

AMR Range (128QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.14

esModemAmrRange256QAM

AMR Range (256QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.15

esModemConfiguration

This object configure the MODEM usage. When the object is set to
'notUsed', the corresponding modem will be disabled.
This function is available only for the iPASOLINK200.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.16

esModemGroupSetting

Radio Traffic Aggregation. The modem ports whose
'esModemGroupSetting' has same value construct the Radio Link
Aggregation.
This configuration is automatically cleared when the SWG
configuration ('esSWGConfiguration') i…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.17

esModemRadioMode

Radio Mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.18

esTdmEtherMapping

E1 Mapping. This object configures the E1 channel count which is
mapped to the radio link.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
nu…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.19

esTdmEtherMappingAmrQPSK

E1 Mapping (QPSK). This object configures the E1 channel count
which is mapped to the radio link running on QPSK on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this …

esTdmEtherMappingAmr16QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.20

E1 Mapping (16QAM). This object configures the E1 channel count
which is mapped to the radio link running on 16QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to thi…

esTdmEtherMappingAmr32QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.21

E1 Mapping (32QAM). This object configures the E1 channel count
which is mapped to the radio link running on 32QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to thi…

esTdmEtherMappingAmr64QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.22

E1 Mapping (64QAM). This object configures the E1 channel count
which is mapped to the radio link running on 64QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to thi…

esTdmEtherMappingAmr128QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.23

E1 Mapping (128QAM). This object configures the E1 channel count
which is mapped to the radio link running on 128QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to t…

esTdmEtherMappingAmr256QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.24

E1 Mapping (256QAM). This object configures the E1 channel count
which is mapped to the radio link running on 256QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to t…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.25

esTdmEtherMappingRst

STM-1 Mapping. This object configures the STM-1 channel count
which is mapped to the radio link.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose chan…

esTdmEtherMappingRstAmrQPSK

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.26

STM-1 Mapping (QPSK). This object configures the STM-1 channel
count which is mapped to the radio link running on QPSK on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to…

esTdmEtherMappingRstAmr16QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.27

STM-1 Mapping (16QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 16QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according …

esTdmEtherMappingRstAmr32QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.28

STM-1 Mapping (32QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 32QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according …

esTdmEtherMappingRstAmr64QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.29

STM-1 Mapping (64QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 64QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according …

esTdmEtherMappingRstAmr128QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.30

STM-1 Mapping (128QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 128QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings accordin…

esTdmEtherMappingRstAmr256QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.31

STM-1 Mapping (256QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 256QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings accordin…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.32

esModemAmrRange512QAM

AMR Range (512QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
deleted.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.33

esModemAmrRange1024QAM

AMR Range (1024QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
delete…

esTdmEtherMappingAmr512QAM

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.34

E1 Mapping (512QAM). This object configures the E1 channel count
which is mapped to the radio link running on 512QAM on the AMR
mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to t…

esTdmEtherMappingAmr1024QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.35

E1 Mapping (1024QAM). This object configures the E1 channel
count which is mapped to the radio link running on 1024QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to…

esTdmEtherMappingRstAmr512QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.36

STM-1 Mapping (512QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 512QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings accordin…

esTdmEtherMappingRstAmr1024QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.37

STM-1 Mapping (1024QAM). This object configures the STM-1
channel count which is mapped to the radio link running on
1024QAM on the AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings accord…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.38

esModemGroupMode

Configure Radio Traffic Aggregation Mode.
When the 'normal' mode aggregation is configured, Ethernet frames
are distributed to the multiple radio links based on usual Link
aggregation behaviour. when the 'phyMode' mode,…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.39

esModemAmrRange2048QAM

AMR Range (2048QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping number are automatically
delete…

esTdmEtherMappingAmr2048QAM

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.40

E1 Mapping (2048QAM). This object configures the E1 channel
count which is mapped to the radio link running on 2048QAM on the
AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to…

esTdmEtherMappingRstAmr2048QAM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.41

STM-1 Mapping (2048QAM). This object configures the STM-1
channel count which is mapped to the radio link running on
2048QAM on the AMR mode.
When this parameter changes, the agent will adjust the E1/RST
mappings accord…

esModemEthTransparentClockPath

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.42

This object configures the bandwidth for Transparent Clock path.
The configuration step is 0 (notUsed), 2, 4, 8 Mbps.

MbpsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.4.2.1.43

esModemSwGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.4.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk esModemSwGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::esModemSwGroupTable'

Configures the MODEM Switch group and XPIC group.

esModemSwGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.4.3.1

Indexes

esModemSwGroupIfIndex

Column	Syntax	OID
esModemSwGroupIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.4.3.1.1`
esModemSwGroupNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.4.3.1.2`
esModemSwRowStatus RowStatus of this table.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.4.3.1.3`
esSWGConfiguration MODEM SW/XPIC Group Configuration. Configures the type of MODEM Switch group and XPIC group. Changing the SW/XPIC Group configuration will remove the CrossConnections and VLANs which are configured to the protection por…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.4.3.1.4`

esStm1ApsTable

table

.1.3.6.1.4.1.119.2.3.69.501.4.4 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk esStm1ApsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::esStm1ApsTable'

STM1 APS configuration.

esStm1ApsEntry row .1.3.6.1.4.1.119.2.3.69.501.4.4.1

Indexes

esStm1ApsIfIndex

Column Syntax OID

esStm1ApsIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.4.4.1.1

esStm1ApsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.4.4.1.2

esApsSwRowStauts

RowStatus of this table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.119.2.3.69.501.4.4.1.3

esApsConfiguration

STM-1 APS Group Configuration. This object indicates the STM1
APS configuration. When the row is created, either sameCard or
diffCard must
be specified. The value cannot be changed to other type once
esStm1ApsTable is c…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.4.4.1.4

esStm1PortModeTable

table

.1.3.6.1.4.1.119.2.3.69.501.4.9 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk esStm1PortModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::esStm1PortModeTable'

Configures the STM-1 Channel mode.

esStm1PortModeEntry row .1.3.6.1.4.1.119.2.3.69.501.4.9.1

Indexes

esStm1PortModeIfIndex

Column	Syntax	OID
esStm1PortModeIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.4.9.1.1`
esStm1PortModeNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.4.9.1.2`
esStm1PortMode STM-1 Port Mode. Changing the port mode to other will remove the CrossConnections and Clock reference setting which are configured to that port.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.4.9.1.3`

provAlarmCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAlarmCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAlarmCommonTable'

Configures the system alarm mode.

provAlarmCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.5.1.1.1

Indexes

provAlarmCommonIndex

Column Syntax OID

provAlarmCommonIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.5.1.1.1.1

provAlarmCommonNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.1.1.1.2

alarmCorrelation

Correlation Setting. Enables/Disables alarm correlation
function.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.1.1.1.3

alarmDelay

Delay Setting.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.1.1.1.4

alarmStretch

Stretch Setting.

alarmEventIndex alarmEventSourceCategory alarmEventElemId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.1.1.1.5

provAlarmEventTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.1.2 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAlarmEventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAlarmEventTable'

configures the alarm severity value.

provAlarmEventEntry row .1.3.6.1.4.1.119.2.3.69.501.5.1.2.1

Indexes

Column Syntax OID

alarmEventIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.1

alarmEventSourceCategory

index of this table. Each alarm is categorized depending on the
generator of that alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.2

alarmEventElemId

index of this table. This object is administrative value which
can distinguish the alarm among the alarmEventSourceCategory.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.3

provAlarmEventNEAddress

reserved.

alarmEventDelayStretchUsage

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.4

alarmEventSeverity

Configures the alarm severity. Once the alarm severity is
changed, the system changes the alarm severity of all raised
alarms, but the corresponding notifications are suppressed. The
manager must synchronize the alarm s…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.5

alarmEventAlarmType

Configures the alarm type based on the X.733 definitions.

AlarmTypeValue

Type Values:

0	invalid
1	communicationsAlarm
2	qualityOfServiceAlarm
3	processingErrorAlarm
4	equipmentAlarm
5	environmentalAlarm
6	integrityViolationAlarm
7	operationalViolationAlarm
8	physicalViolationAlarm
9	securityViolationAlarm
10	timeDomainViolationAlarm

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.6

alarmEventProbableCause

Configures the probable cause based on the X.733 definitions.

ProbableCauseValue

Type Values:

0	invalid
1	aIS
2	callSetUpFailure
3	degradedSignal
4	farEndReceiverFailure
5	framingError
6	lossOfFrame
7	lossOfPointer
8	lossOfSignal
9	payloadTypeMismatch
10	transmissionError
11	remoteAlarmInterface
12	excessiveBER
13	pathTraceMismatch
14	unavailable
15	signalLabelMismatch
16	lossOfMultiFrame
17	receiveFailure
18	transmitFailure
19	modulationFailure
20	demodulationFailure
21	broadcastChannelFailure
22	connectionEstablishmentError
23	invalidMessageReceived
24	localNodeTransmissionError
25	remoteNodeTransmissionError
26	routingFailure
51	backplaneFailure
52	dataSetProblem
53	equipmentIdentifierDuplication
54	externalIFDeviceProblem
55	lineCardProblem
56	multiplexerProblem
57	nEIdentifierDuplication
58	powerProblem
59	processorProblem
60	protectionPathFailure
61	receiverFailure
62	replaceableUnitMissing
63	replaceableUnitTypeMismatch
64	synchronizationSourceMismatch
65	terminalProblem
66	timingProblem
67	transmitterFailure
68	trunkCardProblem
69	replaceableUnitProblem
70	realTimeClockFailure
71	antennaFailure
72	batteryChargingFailure
73	diskFailure
74	frequencyHoppingFailure
75	iODeviceError
76	lossOfSynchronisation
77	lossOfRedundancy
78	powerSupplyFailure
79	signalQualityEvaluationFailure
80	tranceiverFailure
81	protectionMechanismFailure
82	protectingResourceFailure
101	airCompressorFailure
102	airConditioningFailure
103	airDryerFailure
104	batteryDischarging
105	batteryFailure
106	commercialPowerFailure
107	coolingFanFailure
108	engineFailure
109	fireDetectorFailure
110	fuseFailure
111	generatorFailure
112	lowBatteryThreshold
113	pumpFailure
114	rectifierFailure
115	rectifierHighVoltage
116	rectifierLowFVoltage
117	ventilationsSystemFailure
118	enclosureDoorOpen
119	explosiveGas
120	fire
121	flood
122	highHumidity
123	highTemperature
124	highWind
125	iceBuildUp
126	intrusionDetection
127	lowFuel
128	lowHumidity
129	lowCablePressure
130	lowTemperatue
131	lowWater
132	smoke
133	toxicGas
134	coolingSystemFailure
135	externalEquipmentFailure
136	externalPointFailure
151	storageCapacityProblem
152	memoryMismatch
153	corruptData
154	outOfCPUCycles
155	sfwrEnvironmentProblem
156	sfwrDownloadFailure
157	lossOfRealTimel
158	applicationSubsystemFailure
159	configurationOrCustomisationError
160	databaseInconsistency
161	fileError
162	outOfMemory
163	softwareError
164	timeoutExpired
165	underlayingResourceUnavailable
166	versionMismatch
201	bandwidthReduced
202	congestion
203	excessiveErrorRate
204	excessiveResponseTime
205	excessiveRetransmissionRate
206	reducedLoggingCapability
207	systemResourcesOverload
500	adapterError
501	applicationSubsystemFailture
502	bandwidthReducedX733
503	callEstablishmentError
504	communicationsProtocolError
505	communicationsSubsystemFailure
506	configurationOrCustomizationError
507	congestionX733
508	coruptData
509	cpuCyclesLimitExceeded
510	dataSetOrModemError
511	degradedSignalX733
512	dteDceInterfaceError
513	enclosureDoorOpenX733
514	equipmentMalfunction
515	excessiveVibration
516	fileErrorX733
517	fireDetected
518	framingErrorX733
519	heatingVentCoolingSystemProblem
520	humidityUnacceptable
521	inputOutputDeviceError
522	inputDeviceError
523	lanError
524	leakDetected
525	localNodeTransmissionErrorX733
526	lossOfFrameX733
527	lossOfSignalX733
528	materialSupplyExhausted
529	multiplexerProblemX733
530	outOfMemoryX733
531	ouputDeviceError
532	performanceDegraded
533	powerProblems
534	pressureUnacceptable
535	processorProblems
536	pumpFailureX733
537	queueSizeExceeded
538	receiveFailureX733
539	receiverFailureX733
540	remoteNodeTransmissionErrorX733
541	resourceAtOrNearingCapacity
542	responseTimeExecessive
543	retransmissionRateExcessive
544	softwareErrorX733
545	softwareProgramAbnormallyTerminated
546	softwareProgramError
547	storageCapacityProblemX733
548	temperatureUnacceptable
549	thresholdCrossed
550	timingProblemX733
551	toxicLeakDetected
552	transmitFailureX733
553	transmiterFailure
554	underlyingResourceUnavailable
555	versionMismatchX733
600	authenticationFailure
601	breachOfConfidentiality
602	cableTamper
603	delayedInformation
604	denialOfService
605	duplicateInformation
606	informationMissing
607	informationModificationDetected
608	informationOutOfSequence
609	keyExpired
610	nonRepudiationFailure
611	outOfHoursActivity
612	outOfService
613	proceduralError
614	unauthorizedAccessAttempt
615	unexpectedInformation
1024	other

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.7

Delay Stretch Usage. Configures the usage of the delay/stretch
behaviour.

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.1.2.1.8

provAlsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAlsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAlsTable'

Confgiures Automatic Laser Shutdown mode.

provAlsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.2.1

Indexes

provAlsIfIndex

Column Syntax OID

provAlsIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.2.1.1

provAlsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.2.1.2

alsUsage

ALS Usage. Enables/Disables ALS function of the STM-1 port.

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.2.1.3

alsInterval

ALS Interval.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.2.1.4

provE1ChSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.3.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provE1ChSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provE1ChSetTable'

Configure E1 Channel Parameters.

provE1ChSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.3.1.1

Indexes

provE1ChSetIfIndex

Column Syntax OID

provE1ChSetIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.1

provE1ChSetNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.2

e1PortName

Port Name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.3

chUsage

CH Usage.

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.4

chUsageErrorReport

CH Usage Error Report.

ReportNotreportValuer/w

Type Values:

0	invalid
1	notReport
2	report

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.5

impedanceSetting

Impedance.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.3.1.1.6

provE1AisCondTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provE1AisCondTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provE1AisCondTable'

Configures E1 AIS Usage.

provE1AisCondEntry row .1.3.6.1.4.1.119.2.3.69.501.5.3.2.1

Indexes

provE1AisCondIndex

Column Syntax OID

provE1AisCondIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.3.2.1.1

provE1AisCondNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.3.2.1.2

e1AisActivationCond

Enables/Disables E1 AIS Report.

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.3.2.1.3

provE1CardSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.3.3 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provE1CardSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provE1CardSetTable'

Configures E1 Card Parameters.

provE1CardSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.3.3.1

Indexes

provE1CardSetIndex

Column	Syntax	OID
provE1CardSetIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.3.3.1.1`
provE1CardSetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.3.3.1.2`
e1CardLineClkSelect Select the timing source from 16 E1 channels.	Integer32r/w Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.5.3.3.1.3`

provAisGenerationTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.4.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAisGenerationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAisGenerationTable'

Configures AIS Generation Mode of STM-1 Port.

provAisGenerationEntry row .1.3.6.1.4.1.119.2.3.69.501.5.4.1.1

Indexes

provAisGenerationIfIndex

Column	Syntax	OID
provAisGenerationIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.4.1.1.1`
provAisGenerationNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.4.1.1.2`
msAisGeneration MS-AIS Generation. This object configures the behaviour of STM-1 Port on receiving AIS from Radio link.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.4.1.1.3`

provAisSettingTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.4.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAisSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAisSettingTable'

Configures AIS Generate condition.

provAisSettingEntry row .1.3.6.1.4.1.119.2.3.69.501.5.4.2.1

Indexes

provAisSettingIndex

Column Syntax OID

provAisSettingIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.1

provAisSettingNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.2

aisActivationDelay

AIS Activation Delay.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.3

aisActivationCond

AIS Activation Condition.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.4

aisGeneratedReport

AIS Generated Report (E1/STM-1). This object enables the
notification on generating the AIS on the E1 channel/STM-1 port.

ReportNotreportValuer/w

Type Values:

0	invalid
1	notReport
2	report

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.5

aisReceivedReport

AIS Received Report (E1). This object enables the notification
on receiving the AIS on the E1 channel.

ReportNotreportValuer/w

Type Values:

0	invalid
1	notReport
2	report

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.6

aisReceivedCondSet

AIS Received Condition (E1). When the object is set to 'alarm',
the AIS receive event will be reported as alarm event.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.4.2.1.7

provModemSettingTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.5.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provModemSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provModemSettingTable'

Configures MODEM Port parameters.

provModemSettingEntry row .1.3.6.1.4.1.119.2.3.69.501.5.5.1.1

Indexes

provModemSettingIfIndex

Column Syntax OID

provModemSettingIfIndex

Index of this table.

provModemSettingNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.5.1.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.5.1.1.2

modemPortName

Port Name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.501.5.5.1.1.3

headerCompress

Enables/Disables Header compression.

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.5.1.1.4

provSWCondTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.5.2 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSWCondTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSWCondTable'

Configures Tx/Rx Sw Conditions.

provSWCondEntry row .1.3.6.1.4.1.119.2.3.69.501.5.5.2.1

Indexes

provSWCondIfIndex

Column Syntax OID

provSWCondIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.1

provSWCondNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.2

txSwPriority

Tx SW Priority.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.3

rxSwPriority

Rx SW Priority.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.4

txSwLockinUsage

Tx SW Lock-in Usage.

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.5

txSwDetectionTime

Tx SW Detection Time.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.6

txSwDetectionCounter

Tx SW Detection Counter.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.7

txSwClearLockinTime

Tx SW Clear Lock-in Time.

Integer32r/w

Constraints:
range: 1-48

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.8

reverseFunctionUsage

Tx SW Reverse Function Usage.

provModemHeaderCompressIfIndex

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.9

rxSwEwCondition

Rx SW Condition Early Warning. This object determines the Early
Warning is included as Rx Sw trigger or not.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.5.2.1.10

provAmrSWCondTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.5.4 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAmrSWCondTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAmrSWCondTable'

Configure AMR modulation switch condition.

provAmrSWCondEntry row .1.3.6.1.4.1.119.2.3.69.501.5.5.4.1

Indexes

provAmrSWCondIfIndex

Column	Syntax	OID
provAmrSWCondIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.5.4.1.1`
provAmrSWCondNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.5.4.1.2`
amrSwitchCondition AMR Switch Condition. This object determines the AMR modulation switch condition includes Receive Signal Level or not.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.5.4.1.3`
amrSwitchTransition AMR Switch Transition.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.5.4.1.4`

provModemHeaderCompressTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.5.5 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provModemHeaderCompressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provModemHeaderCompressTable'

This table configures Header Compression Function.
This table is created automatically when the Modem Card is
provisioned, if the F/W supports the new Header Compression
function.

provModemHeaderCompressEntry row .1.3.6.1.4.1.119.2.3.69.501.5.5.5.1

Indexes

Column	Syntax	OID
provModemHeaderCompressIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.5.5.1.1`
provModemHeaderCompressNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.5.5.1.2`
provModemHeaderCompressMode Modem Header/Payload* Compression. The previous header compress object 'headerCompress' acts as read-only object, when this object is supported. And this object is set to other than 'mac', the value of 'headerCompress' …	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.5.5.1.3`

provTxPowerContTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.6 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTxPowerContTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTxPowerContTable'

Configures the Tx Power Control.

provTxPowerContEntry row .1.3.6.1.4.1.119.2.3.69.501.5.6.1

Indexes

provTxPowerContIfIndex

Column	Syntax	OID
provTxPowerContIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.1`
provTxPowerContNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.2`
atpcRangeMax The maximum range of ATPC Power.	Integer32r/w Constraints: `range: -380-400`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.3`
atpcRangeMin The minimum range of ATPC Power.	Integer32r/w Constraints: `range: -380-400`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.4`
atpcHysteresis Hysterisis of the ATPC.	Integer32r/w Constraints: `range: 0-9`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.5`
mtpcTxPower Power Setting of MTPC Mode.	Integer32r/w Constraints: `range: -380-400`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.6`
rxThresholdLevel The RX Threshold Level of ATPC Mode.	Integer32r/w Constraints: `range: -90--30`	`.1.3.6.1.4.1.119.2.3.69.501.5.6.1.7`

provAlmModeTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.7 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAlmModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAlmModeTable'

provAlmModeEntry row .1.3.6.1.4.1.119.2.3.69.501.5.7.1

Indexes

provAlmModeIfIndex

Column	Syntax	OID
provAlmModeIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.7.1.1`
provAlmModeNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.7.1.2`
atpcPowerModeSet ATPC Power Mode.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.7.1.3`
oduCommAlmModeSet ODU Communication Alarm Mode.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.7.1.4`

provRadioBERThresholdTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provRadioBERThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provRadioBERThresholdTable'

provRadioBERThresholdEntry row .1.3.6.1.4.1.119.2.3.69.501.5.8.1.1

Indexes

provRadioBERThresholdIfIndex

Column	Syntax	OID
provRadioBERThresholdIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.8.1.1.1`
provRadioBERThresholdNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.8.1.1.2`
highBER The threshold configuration of High BER alarm.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.8.1.1.3`
lowBER The threshold configuration of Low BER alarm.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.8.1.1.4`

provStm1BERThresholdTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.8.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provStm1BERThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provStm1BERThresholdTable'

provStm1BERThresholdEntry row .1.3.6.1.4.1.119.2.3.69.501.5.8.2.1

Indexes

provStm1BERThresholdIfIndex

Column	Syntax	OID
provStm1BERThresholdIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.8.2.1.1`
provStm1BERThresholdNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.8.2.1.2`
eBER The threshold configuration of eBER alarm.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.8.2.1.3`
sd The threshold configuration of Signal Degrade.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.8.2.1.4`

provPMONSelectTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.9 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provPMONSelectTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provPMONSelectTable'

provPMONSelectEntry row .1.3.6.1.4.1.119.2.3.69.501.5.9.1

Indexes

provPMONSelectIfIndex

Column	Syntax	OID
provPMONSelectIfIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.9.1.1`
provPMONSelectNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.9.1.2`
pmonRxLevelTCNThreshold The minimum threshold of Rx Level Alarm.	Integer32r/w Constraints: `range: -99--30`	`.1.3.6.1.4.1.119.2.3.69.501.5.9.1.3`

provTCNThreshold15minRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minRadioTable'

This table contains threshold configuration for monitoring of
Radio Link.
For high capacity radio equipment, if
provTCNThreshold15minRadio2Table is instantiated, this table acts
as read-only and this table returns same value of
provTCNThreshold15minRadio2Table.

provTCNThreshold15minRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1

Indexes

provTCNThreshold15minModemIfIndex provTCNThreshold15minModemMonitorName

Column	Syntax	OID
provTCNThreshold15minModemIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1.1`
provTCNThreshold15minModemMonitorName Index of this table. This object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1.2`
provTCNThreshold15minRadioNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1.3`
provTCNThreshold15minRfOccurValue The threshold of alarm detection per 15 minutes monitoring item of the Radio Link.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1.4`
provTCNThreshold15minRfRecoverValue The threshold of alarm clearing per 15minites monitoring item of the Radio Link.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.1.1.1.5`

provTCNThreshold15minTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minTmRsTable'

provTCNThreshold15minTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1

Indexes

provTCNThreshold15minTmRsIfIndex provTCNThreshold15minTmRsMonitorName

Column	Syntax	OID
provTCNThreshold15minTmRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1.1`
provTCNThreshold15minTmRsMonitorName Index of this table. The object represents the montioring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1.2`
provTCNThreshold15minTmRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1.3`
provTCNThreshold15minTmRsOccurValue The threshold of alarm detection per 15 minutes monitoring item of the Throughmode STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1.4`
provTCNThreshold15minTmRsRecoverValue the threshold of alarm clearing per 15 minutes monitoring item of the throughmode STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.1.1.5`

provTCNThreshold15minTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minTmDMRRsTable'

provTCNThreshold15minTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1

Indexes

provTCNThreshold15minTmDMRRsIfIndex provTCNThreshold15minTmDMRRsMonitorName

Column	Syntax	OID
provTCNThreshold15minTmDMRRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1.1`
provTCNThreshold15minTmDMRRsMonitorName Index of the table. The object represents the monintoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1.2`
provTCNThreshold15minTmDMRRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1.3`
provTCNThreshold15minTmDMRRsOccurValue The threshold of alarm detection per 15 minute montioring item of DMR Mode STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1.4`
provTCNThreshold15minTmDMRRsRecoverValue The threshold of alarm clearing per 15 minute monitoring item of DMR Mode STM-1 Rs layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.1.2.1.5`

provTCNThreshold15minChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minChRsTable'

provTCNThreshold15minChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1

Indexes

provTCNThreshold15minChRsIfIndex provTCNThreshold15minChRsMonitorName

Column	Syntax	OID
provTCNThreshold15minChRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1.1`
provTCNThreshold15minChRsMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1.2`
provTCNThreshold15minChRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1.3`
provTCNThreshold15minChRsOccurValue The threshold of alarm detection of 15 minute monitoring of Channerized mode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1.4`
provTCNThreshold15minChRsRecoverValue The threshold of alarm clearing of 15 minute monitoring of Channerized mode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.1.1.5`

provTCNThreshold15minChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minChMsTable'

provTCNThreshold15minChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1

Indexes

provTCNThreshold15minChMsIfIndex provTCNThreshold15minChMsMonitorName

Column	Syntax	OID
provTCNThreshold15minChMsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1.1`
provTCNThreshold15minChMsMonitorName Index of the table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1.2`
provTCNThreshold15minChMsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1.3`
provTCNThreshold15minChMsOccurValue The threshold of alarm detection of 15 minutes monitoring of Channelized STM-1 MS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1.4`
provTCNThreshold15minChMsRecoverValue The threshold of alarm clearing of 15 minutes monitoring of Channelized STM-1 MS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.2.2.1.5`

provTCNThreshold15min16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15min16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15min16E1PdhTable'

provTCNThreshold15min16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1

Indexes

provTCNThreshold15min16E1PdhIfIndex provTCNThreshold15min16E1PdhMonitorName

Column	Syntax	OID
provTCNThreshold15min16E1PdhIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1.1`
provTCNThreshold15min16E1PdhMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1.2`
provTCNThreshold15min16E1PdhNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1.3`
provTCNThreshold15min16E1PdhOccurValue The threshold of the alarm detection of 15 minutes monitoring of 16E1.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1.4`
provTCNThreshold15min16E1PdhRecoverValue The threshold of the alarm clearing of 15 minutes monitoring of 16E1.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.2.3.1.1.5`

provTCNThreshold1dayRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayRadioTable'

This table contains threshold configuration for monitoring of
Radio Link.
For high capacity radio equipment, if
provTCNThreshold1dayRadio2Table is instantiated, this table acts
as read-only and this table returns same value of
provTCNThreshold1dayRadio2Table.

provTCNThreshold1dayRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1

Indexes

provTCNThreshold1dayModemIfIndex provTCNThreshold1dayModemMonitorName

Column	Syntax	OID
provTCNThreshold1dayModemIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1.1`
provTCNThreshold1dayModemMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1.2`
provTCNThreshold1dayRadioNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1.3`
provTCNThreshold1dayRfOccurValue The threshold of alarm detection of 1 day montioring of Radio Link.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1.4`
provTCNThreshold1dayRfRecoverValue The threshold of alarm clearing of 1 day monitoring of Radio Link.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.3.1.1.5`

provTCNThreshold1dayTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayTmRsTable'

provTCNThreshold1dayTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1

Indexes

provTCNThreshold1dayTmRsIfIndex provTCNThreshold1dayTmRsMonitorName

Column	Syntax	OID
provTCNThreshold1dayTmRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1.1`
provTCNThreshold1dayTmRsMonitorName Index of this table. The object of the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1.2`
provTCNThreshold1dayTmRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1.3`
provTCNThreshold1dayTmRsOccurValue The threshold of alarm detection of 1 day monitoring of Throughmode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1.4`
provTCNThreshold1dayTmRsRecoverValue The threshold of alarm clearing of 1 day monitoring of Throughmode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.1.1.5`

provTCNThreshold1dayTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayTmDMRRsTable'

provTCNThreshold1dayTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1

Indexes

provTCNThreshold1dayTmDMRRsIfIndex provTCNThreshold1dayTmDMRRsMonitorName

Column	Syntax	OID
provTCNThreshold1dayTmDMRRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1.1`
provTCNThreshold1dayTmDMRRsMonitorName Index of this table. This object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1.2`
provTCNThreshold1dayTmDMRRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1.3`
provTCNThreshold1dayTmDMRRsOccurValue The threshold of alarm detection of 1 day monitoring of DMR Mode STM-1 RS Layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1.4`
provTCNThreshold1dayTmDMRRsRecoverValue The threshold of alarm clearing of 1 day monitoring of DMR Mode STM-1 RS Layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.1.2.1.5`

provTCNThreshold1dayChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayChRsTable'

provTCNThreshold1dayChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1

Indexes

provTCNThreshold1dayChRsIfIndex provTCNThreshold1dayChRsMonitorName

Column	Syntax	OID
provTCNThreshold1dayChRsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1.1`
provTCNThreshold1dayChRsMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1.2`
provTCNThreshold1dayChRsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1.3`
provTCNThreshold1dayChRsOccurValue The threshold of alarm detection per 1 day monitoring item of Channelized mode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1.4`
provTCNThreshold1dayChRsRecoverValue the threshold of alarm clearing per 1 day monitoring item of Channelized mode of STM-1 RS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.1.1.5`

provTCNThreshold1dayChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayChMsTable'

provTCNThreshold1dayChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1

Indexes

provTCNThreshold1dayChMsIfIndex provTCNThreshold1dayChMsMonitorName

Column	Syntax	OID
provTCNThreshold1dayChMsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1.1`
provTCNThreshold1dayChMsMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1.2`
provTCNThreshold1dayChMsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1.3`
provTCNThreshold1dayChMsOccurValue the threshold of alarm detection per 1 day monitoring of Channelized mode STM-1 MS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1.4`
provTCNThreshold1dayChMsRecoverValue the threshold of alarm clearing per 1 day monitoring of Channelized mode STM-1 MS layer.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.2.2.1.5`

provTCNThreshold1day16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1day16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1day16E1PdhTable'

provTCNThreshold1day16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1

Indexes

provTCNThreshold1day16E1PdhIfIndex provTCNThreshold1day16E1PdhMonitorName

Column	Syntax	OID
provTCNThreshold1day16E1PdhIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1.1`
provTCNThreshold1day16E1PdhMonitorName Index of this table. The object represents the monitoring item.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1.2`
provTCNThreshold1day16E1PdhNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1.3`
provTCNThreshold1day16E1PdhOccurValue The threshold of alarm detection per the 1 day monitoring of 16E1.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1.4`
provTCNThreshold1day16E1PdhRecoverValue The threshold of alarm clearing per the 1 day monitoring of 16E1.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.4.3.1.1.5`

provTCNThreshold15minRmonTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold15minRmonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold15minRmonTable'

Threshold configuration of 15 min RMON items.

provTCNThreshold15minRmonEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1

Indexes

provTCNThreshold15minRmonIndex

Column	Syntax	OID
provTCNThreshold15minRmonIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.1`
provTCNThreshold15minRmonNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.2`
provTCNThreshold15minHCRxEthStatsDropEvents TCN DropEvent Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.3`
provTCNThreshold15minHCRxEthStatsUndersizePkts TCN UndersizePkts Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.4`
provTCNThreshold15minHCRxEthStatsFragments TCN Fragments Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.5`
provTCNThreshold15minHCRxEthStatsCRCAlignErrors TCN CRCAlignErrors Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.6`
provTCNThreshold15minHCRxEthStatsOversizePkts TCN OversizePkts Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.7`
provTCNThreshold15minHCTxEthStatsCollisions TCN Collisions Threshold - 15min value range :0-133929000 Default :133929000	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.5.1.1.8`

provTCNThreshold1dayRmonTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTCNThreshold1dayRmonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTCNThreshold1dayRmonTable'

TCN Threshold 1day

provTCNThreshold1dayRmonEntry row .1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1

TCN Threshold 1day

Indexes

provTCNThreshold1dayRmonIndex

Column	Syntax	OID
provTCNThreshold1dayRmonIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.1`
provTCNThreshold1dayRmonNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.2`
provTCNThreshold1dayHCRxEthStatsDropEvents TCN DropEvent Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.3`
provTCNThreshold1dayHCRxEthStatsUndersizePkts TCN UndersizePkts Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.4`
provTCNThreshold1dayHCRxEthStatsFragments TCN Fragments Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.5`
provTCNThreshold1dayHCRxEthStatsCRCAlignErrors TCN CRCAlignErrors Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.6`
provTCNThreshold1dayHCRxEthStatsOversizePkts TCN OversizePkts Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.7`
provTCNThreshold1dayHCTxEthStatsCollisions TCN Collisions Threshold - 1day value range :0-4294967294 Default :4294967294	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.5.10.6.1.1.8`

provDXCTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.11.1 · 1 row entry · 11 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provDXCTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provDXCTable'

provDXCEntry row .1.3.6.1.4.1.119.2.3.69.501.5.11.1.1

Indexes

provDXCIndex

Column	Syntax	OID
provDXCIndex Index of this table.	Integer32 Constraints: `range: 1-2352`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.1`
provDXCNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.2`
dxcRowStatus RowStatus of this table.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.3`
serviceName Service Name	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.4`
aTermProtection Edge.A Protection	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.5`
aTerm1 Edge.A Term1	IF-MIBInterfaceIndexOrZeror/w Type Constraints: `range: 0..2147483647` Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.6`
aTerm2 Edge.A Term2	IF-MIBInterfaceIndexOrZeror/w Type Constraints: `range: 0..2147483647` Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.7`
bTermProtection Edge.B Protection	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.8`
bTerm1 Edge.B Term1	IF-MIBInterfaceIndexOrZeror/w Type Constraints: `range: 0..2147483647` Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.9`
bTerm2 Edge.B Term2	IF-MIBInterfaceIndexOrZeror/w Type Constraints: `range: 0..2147483647` Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.10`
dxcMode Cross Connect Type	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.11.1.1.11`

provE1SncpTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.11.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provE1SncpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provE1SncpTable'

provE1SncpEntry row .1.3.6.1.4.1.119.2.3.69.501.5.11.2.1

Indexes

provE1SncpIndex

Column Syntax OID

provE1SncpIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.5.11.2.1.1

provE1SncpNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.11.2.1.2

holdOff

Hold Off Timer

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.11.2.1.3

provDXCNumberTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.11.5 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provDXCNumberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provDXCNumberTable'

provDXCNumberEntry row .1.3.6.1.4.1.119.2.3.69.501.5.11.5.1

Indexes

provDXCNumberIndex

Column	Syntax	OID
provDXCNumberIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.5.1.1`
provDXCNumberNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.5.1.2`
provDXCTotalNumber The Total Number of Cross Connect	Integer32 Constraints: `range: 0-2352`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.5.1.3`
provDXCEdgeNumOnRestrictedSlots The Total Number of Channels for Restricted Slot	Integer32 Constraints: `range: 0-336`	`.1.3.6.1.4.1.119.2.3.69.501.5.11.5.1.4`

provXPICTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.12.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provXPICTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provXPICTable'

provXPICEntry row .1.3.6.1.4.1.119.2.3.69.501.5.12.1.1

Indexes

provXPICIfIndex

Column	Syntax	OID
provXPICIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.12.1.1.1`
provXPICNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.12.1.1.2`
xpicCondLoSignalFail XPIC Local Fail	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.12.1.1.3`
xdemDelayAdjust X-DEM Delay Adjust	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.12.1.1.4`
xdemDelayAdjustNo2 X-DEM Delay Adjust	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.12.1.1.5`

provStm1PortSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.13.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provStm1PortSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provStm1PortSetTable'

provStm1PortSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.13.1.1

Indexes

provStm1PortSetIfIndex

Column Syntax OID

provStm1PortSetIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.1

provStm1PortSetNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.2

stm1PortName

Port Name

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.3

stm1PortUsage

Port Usage

stm1PathTraceRxExpValueJ0

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.4

stm1PathTraceTxValueJ0

Section Trace Send Value

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.5

Expected Section Trace Value

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.119.2.3.69.501.5.13.1.1.6

provStm1ChPortSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.13.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provStm1ChPortSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provStm1ChPortSetTable'

provStm1ChPortSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.13.2.1

Indexes

provStm1ChPortSetIfIndex

Column	Syntax	OID
provStm1ChPortSetIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.1`
provStm1ChPortSetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.2`
stm1ModeSetting STM-1 Mode	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.3`
stm1LowOrderPathTrace Low Order Path Trace Send Value	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.4`
stm1PathTraceTxValueJ1 High Order Path Trace Send Value	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.5`
stm1PathTraceRxExpValueJ1 Expected High Order Path Trace Value	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.119.2.3.69.501.5.13.2.1.6`

provStm1CardSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.13.3 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provStm1CardSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provStm1CardSetTable'

provStm1CardSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.13.3.1

Indexes

provStm1CardSetIndex

Column Syntax OID

provStm1CardSetIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.1

provStm1CardSetNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.2

stm1TraceUsageSelect

Trace Mode

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.3

stm1TraceMismatchAction

Trace Mismatch AIS Generation Action

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.4

stm1SfAlarmTransfer

Signal Fail is transferred as TU-AIS.
New definition for 400.

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.5

stm1SdAlarmTransfer

Signal Degrade is transferred by N2 byte.
New definition for 400.

provTimingSourceSelect400Index

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.6

stm1CardLineClkSelect

Select the timing source from two STM1 channels.
New definition for 400.

Integer32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.119.2.3.69.501.5.13.3.1.7

provClkSelect400Table

table

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provClkSelect400Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provClkSelect400Table'

provClkSelect400Entry row .1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1

Indexes

provClkSelect400Index

Column	Syntax	OID
provClkSelect400Index Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.1`
provClkSelect400NEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.2`
e1LineClkSelect400 E1 Line Clock Select	Integer32r/w Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.3`
gbeLineClkSelect400 Select the timing source from GbE channels on Main Card. range : 1 - 8 [iPASOLINK VR 4] 1 - 6 [iPASOLINK 400A/VR 2] 1 - 4 [iPASOLINK 400/1000/EX] 1 - 2, 5 - 6[iPASOLINK 200A/iX] 1 - 3[iPA…	Integer32r/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.4`
mbTimingSourceSelect400 Configure Timing Source.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.5`
waitToRestore400 Wait To Restore Timer	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.6`
clockSourceSelectiveMode400 Clock Source Selective Mode	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.7`
gbeLineClkSelect2 Select the timing source from GbE channels on Main Card. range : 1 - 6 [iPASOLINK 400A] 1 - 4 [iPASOLINK 400/1000/EX/VR 4/VR 2] 1 - 2, 5 - 6[iPASOLINK 200A/iX] 1 [iPASOLINK EX/A]	Integer32r/w Constraints: `range: 1-6`	`.1.3.6.1.4.1.119.2.3.69.501.5.14.2.11.1.8`

provTimingSourceSelect400Table

table

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provTimingSourceSelect400Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provTimingSourceSelect400Table'

provTimingSourceSelect400Entry row .1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1

Indexes

Column Syntax OID

provTimingSourceSelect400Index

Index of this table.

provTimingSourceSelect400NEAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.1

reserved.

clk2MTimingSource400Select

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.2

Timing Source Select

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.3

clk2MTimingSource400Priority

Timing Source Priority Level

Integer32r/w

Constraints:
range: 0-12

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.4

forcedSsmValue400

Forced SSM Value

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.5

ssmUsage400

SSM Usage

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.14.2.12.1.6

provExtClock400Table

table

.1.3.6.1.4.1.119.2.3.69.501.5.14.11 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provExtClock400Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provExtClock400Table'

provExtClock400Entry row .1.3.6.1.4.1.119.2.3.69.501.5.14.11.1

Indexes

provExtClock400Index

Column Syntax OID

provExtClock400Index

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.1

provExtClock400NEAddress

reserved.

provExtClock400ExtImpedance

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.2

External Clock Impedance

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.3

provExtClock400ExtInterface

External Clock Interface

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.4

provExtClock400Crc

CRC On / Off

provExtClock400MessagePathThrough

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.5

provExtClock400Ssm

SSM Support

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.6

provExtClock400SaBit

Sa Bit

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.7

Message Pass Through

provExtClock400QlThreshold

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.8

QL Threshold

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.9

provExtClock400ThresholdAisGen

Threshold AIS Generation Mode

provExtClock400AisHizSelect

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.10

provExtClock400ExtClkSel

External Clock Out Select

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.11

AIS Generation Mode

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.12

provExtClock400DnuIns

Timing Loop Prevention

provExtClock400InsQlValue

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.13

Forced SSM Send Value

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.14.11.1.14

provRelayConfigTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.15.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provRelayConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provRelayConfigTable'

This table contains relay control and alarm output
configuration.

provRelayConfigEntry row .1.3.6.1.4.1.119.2.3.69.501.5.15.1.1

Indexes

provRelayConfigIndex

Column	Syntax	OID
provRelayConfigIndex Index of this table.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.15.1.1.1`
provRelayConfigNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.1.1.2`
provRelayConfigData configure alarms to be outputted to relay.	OctetStringr/w Constraints: `range: 560-560`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.1.1.3`
provRelayConfigData2 configure alarms to be outputted to relay.	OctetStringr/w Constraints: `range: 100-100`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.1.1.4`

provClusterAssignInputTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.15.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provClusterAssignInputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provClusterAssignInputTable'

This table contains Cluster Alarm Input assignment.

provClusterAssignInputEntry row .1.3.6.1.4.1.119.2.3.69.501.5.15.2.1

Indexes

provClusterAssignInputIfIndex

Column	Syntax	OID
provClusterAssignInputIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.15.2.1.1`
provClusterAssignInputNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.2.1.2`
relayClusterAssignInput Cluster Alarm Input assign	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.2.1.3`

provClusterAssignOutputTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.15.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provClusterAssignOutputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provClusterAssignOutputTable'

This table contains Cluster Alarm Output assignment.

provClusterAssignOutputEntry row .1.3.6.1.4.1.119.2.3.69.501.5.15.3.1

Indexes

provClusterAssignOutputIndex

Column	Syntax	OID
provClusterAssignOutputIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.3.1.1`
provClusterAssignOutputNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.3.1.2`
relayClusterAssignOutput Cluster Alarm Output assignment.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.15.3.1.3`
provHkcOutputSetting House Keeping Control Output setting.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.15.3.1.4`

provEOWCallPolarityTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.16.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEOWCallPolarityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEOWCallPolarityTable'

This table contains EOW Call Polarity setting.

provEOWCallPolarityEntry row .1.3.6.1.4.1.119.2.3.69.501.5.16.1.1

Indexes

provEOWCallPolaritySlotIndex

Column	Syntax	OID
provEOWCallPolaritySlotIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.16.1.1.1`
provEOWCallPolarityNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.16.1.1.2`
provCallPolarity EOW Call Polarity setting.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.16.1.1.3`

provEOWDscTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.16.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEOWDscTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEOWDscTable'

This table contains EOW DSC setting.

provEOWDscEntry row .1.3.6.1.4.1.119.2.3.69.501.5.16.2.1

Indexes

provEOWDscIfIndex

Column Syntax OID

provEOWDscIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.16.2.1.1

provEOWDscNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.16.2.1.2

provEOWDscUsage

EOW DSC setting.

provScSohThroughSetIfIndex

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.16.2.1.3

provSCAssignV11Table

table

.1.3.6.1.4.1.119.2.3.69.501.5.17.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSCAssignV11Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSCAssignV11Table'

This table contains V11 Interface Direction setting and
assignment.

provSCAssignV11Entry row .1.3.6.1.4.1.119.2.3.69.501.5.17.1.1.1

Indexes

provSCAssignV11Index

Column	Syntax	OID
provSCAssignV11Index Index of this table.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.1.1.1`
provSCAssignV11NEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.1.1.2`
v11Interface V11 Interface Direction setting.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.1.1.3`
v11Assign V11 assignment.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.1.1.4`

provSCAssignRs232cTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.17.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSCAssignRs232cTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSCAssignRs232cTable'

This table contains RS232C Interface assignment.

provSCAssignRs232cEntry row .1.3.6.1.4.1.119.2.3.69.501.5.17.1.2.1

Indexes

provSCAssignRs232cIndex

Column	Syntax	OID
provSCAssignRs232cIndex Index of this table.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.2.1.1`
provSCAssignRs232cNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.2.1.2`
rs232cAssign RS232C assignment.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.1.2.1.3`

provScSohThroughSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.17.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provScSohThroughSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provScSohThroughSetTable'

This table contains SOH Through setting.

provScSohThroughSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.17.2.1

Indexes

Column	Syntax	OID
provScSohThroughSetIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.17.2.1.1`
provScSohThroughSetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.2.1.2`
scSohThroughSetting SOH Through setting.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.2.1.3`

provSCAssignNoteTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.17.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSCAssignNoteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSCAssignNoteTable'

This table contains V11 setting for log/trap.

provSCAssignNoteEntry row .1.3.6.1.4.1.119.2.3.69.501.5.17.3.1

Indexes

provSCAssignNoteIndex

Column	Syntax	OID
provSCAssignNoteIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.3.1.1`
provSCAssignNoteNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.3.1.2`
provSCAssignNoteV11Interface V11 Interface setting.	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.3.1.3`
provSCAssignNoteV11SCAssign V11 assignment setting.	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.17.3.1.4`

provAmrOperationTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.18 · 1 row entry · 11 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provAmrOperationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provAmrOperationTable'

This table contains AMR Operation control.

provAmrOperationEntry row .1.3.6.1.4.1.119.2.3.69.501.5.18.1

Indexes

provAmrOperationIfIndex

Column	Syntax	OID
provAmrOperationIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.1`
provAmrOperationNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.2`
cnThresholdOffset CNR Threshold Offset	Integer32r/w Constraints: `range: -3-3`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.3`
cnHysteresysOffset CNR Hysteresis Offset	Integer32r/w Constraints: `range: 0-9`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.4`
rslThresholdOffset RSL Threshold Offset	Integer32r/w Constraints: `range: -3-3`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.5`
rslHysteresysOffset RSL Hysteresis Offset	Integer32r/w Constraints: `range: 0-9`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.6`
atpcThresholdOffset ATPC Threshold Offset	Integer32r/w Constraints: `range: 0-6`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.7`
decisionInterval AMR Decision Interval	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.8`
holdProtction AMR Hold Protection	Integer32r/w Constraints: `range: 1-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.9`
promoteProtection AMR Promote Protection	Integer32r/w Constraints: `range: 1-65536`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.10`
degradeProtection AMR Degrade Protection	Integer32r/w Constraints: `range: 1-1024`	`.1.3.6.1.4.1.119.2.3.69.501.5.18.1.11`

provSoftkeyTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.19 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSoftkeyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSoftkeyTable'

provSoftkeyEntry row .1.3.6.1.4.1.119.2.3.69.501.5.19.1

Indexes

provSoftkeyIndex

Column	Syntax	OID
provSoftkeyIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.19.1.1`
provSoftkeyNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.19.1.2`
provRadioCapacity Radio Capacity	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.19.1.3`
provSfpUseAssign SFP Port Usage	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.19.1.4`

provVlanEquipmentTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanEquipmentTable'

VLAN EQUIPMENT TABLE

provVlanEquipmentEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.1.1

VLAN EQUIPMENT ENTRY

Indexes

provVlanEquipmentIndex

Column	Syntax	OID
provVlanEquipmentIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.1.1.1`
provVlanEquipmentNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.1.1.2`
provVlanEquipmentMode VLAN Mode 1. 802.1q mode 2. 802.1ad mode Note) It is possible to set in ADV/4, ADV/10(STD Read Only-support). (only 802.1q mode in STD)	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.1.1.3`
provVlanEquipmentDefaultVid Default VLAN-ID value range : 1-4094 default : 1 FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.1.1.4`
provVlanEquipmentDefaultTpid TPID value which is used to identify the frame as an IEEE 802.1Q or 802.1ad tagged frame.	OctetStringr/w Constraints: `range: 2-2`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.1.1.5`

provVlanCustomerTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanCustomerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanCustomerTable'

CUSTOMER VLAN TABLE

provVlanCustomerEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.2.1

CUSTOMER VLAN PORT ENTRY

Indexes

provVlanCustomerIfIndex provVlanCustomerVlanIndex

Column	Syntax	OID
provVlanCustomerIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.20.2.1.1`
provVlanCustomerVlanIndex Index of this table.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.2.1.2`
provVlanCustomerNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.2.1.3`
provVlanCustomerPort VLAN TYPE 1. Access(default) 2. Tunnel 3. Trunk FLAG=TRAP\|EVLOG	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.2.1.4`
provVlanCustomerRowstatus Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP\|EVLOG	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.2.1.5`

provVlanServiceTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.3 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanServiceTable'

provVlanServiceEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.3.1

Indexes

provVlanServiceIfIndex provVlanServiceVlanIndex

Column Syntax OID

provVlanServiceIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.20.3.1.1

provVlanServiceVlanIndex

Index of this table.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.5.20.3.1.2

provVlanServiceNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.20.3.1.3

provVlanServicePortType

VLAN Port Type(VLAN ID)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.20.3.1.4

provVlanServiceRowStatus

RowStatus of this table.

provVlanCBridgeIfIndex provVlanCBridgeSVlanIndex provVlanCBridgeCVlanIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.20.3.1.5

provVlanCBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.4 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanCBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanCBridgeTable'

provVlanCBridgeEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.4.1

Indexes

Column Syntax OID

provVlanCBridgeIfIndex

Index of this table.

provVlanCBridgeSVlanIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.1

Index of this table.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.2

provVlanCBridgeCVlanIndex

Index of this table.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.3

provVlanCBridgeNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.4

provVlanCBridgePortType

VLAN Port Type(C-VLAN ID)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.5

provVlanCBridgeRowStatus

RowStatus of this table.

provDot1adPortVlanIfIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.20.4.1.6

provVlanNameTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.5 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanNameTable'

VLAN NAME TABLE

provVlanNameEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.5.1

VLAN NAME ENTRY

Indexes

provVlanNameVlanIndex

Column	Syntax	OID
provVlanNameVlanIndex Index of this table.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.5.1.1`
provVlanNameNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.5.1.2`
provVlanName VLAN Service Name	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.5.1.3`
provVlanNameRowstatus RowStatus of this table.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.5.1.4`

provVlanCounterTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.7 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provVlanCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provVlanCounterTable'

VLAN COUNTER TABLE

provVlanCounterEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.7.1

VLAN COUNTER ENTRY

Indexes

provVlanCounterIndex

Column	Syntax	OID
provVlanCounterIndex Index of this table.	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.7.1.1`
provVlanCounterNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.7.1.2`
provVlanCounterEntryPort Port Number	IF-MIBInterfaceIndexr/w Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.20.7.1.3`
provVlanCounterEntryVid VLAN ID which becomes a counter target value range : 1-4094 Note) it is possible to set it When the specified VLAN ID exists in specified port. FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.7.1.4`
provVlanCounterRowstatus Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP\|EVLOG	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.7.1.5`

provDot1qPortVlanTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.10 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provDot1qPortVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provDot1qPortVlanTable'

Port base VLAN Information Table for 802.1q mode.
This table provides summarized assigned VLAN information for the
specified port. MAX-ACCESS of the object inside of this table is
writable. But provisioning function (VLAN assign function through
this table) is future support. These objects act as read-only
object currently.

provDot1qPortVlanEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.10.1

Indexes

provDot1qPortVlanIfIndex

Column	Syntax	OID
provDot1qPortVlanIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.20.10.1.1`
provDot1qPortVlanNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.10.1.2`
provDot1qPortVlanPortType VLAN Port Type. When the port is configured as 'tunnel' port, the object returns value as 'tunnel'. If trunk VLANs are assigned to the port, the object returns value as 'trunk'. Trunk VLANs and Access VLANs are assigned…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.10.1.3`
provDot1qPortVlanList VLAN List. When the 'provDot1qPortVlanPortType' is 'tunnel' port, the object shows tunnel VLANs assigned to the port. The other port type, the object shows trunk VLANs assigned to the port.	IpeVlanListOrZeror/w Type Constraints: `range: 0` `range: 512`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.10.1.4`
provDot1qPortAccessVid Access VLAN ID. When the 'provDot1qPortVlanPortType' is 'trunkWithAccess' or 'accessOnly', the object returns access VLAN ID. Otherwise the object returns '0'.	IpeVlanIndexOrZeror/w Type Constraints: `range: 0..4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.10.1.5`

provDot1adPortVlanTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.20.11 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provDot1adPortVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provDot1adPortVlanTable'

Port base VLAN Information Table for 802.1ad mode.
This table provides summarized assigned VLAN information for the
specified port. MAX-ACCESS of the object inside of this table is
writable. But provisioning function (VLAN assign function through
this table) is future support. These objects act as read-only
object currently.

provDot1adPortVlanEntry row .1.3.6.1.4.1.119.2.3.69.501.5.20.11.1

Indexes

Column	Syntax	OID
provDot1adPortVlanIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.20.11.1.1`
provDot1adPortVlanNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.11.1.2`
provDot1adPortVlanPortType VLAN Port Type. When the port is configured as C-Bridge port, the object returns 'bridge'. If s-trunk VLANs are assigned to the port, the object returns value as 'trunk'. S-Trunk VLANs and C-Access VLANs are assigned to…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.20.11.1.3`
provDot1adPortVlanList VLAN List. When the 'provDot1adPortVlanPortType' is 'bridge' port, the object returns empty value (length 0 string). The other port type, the object shows S-trunk VLANs assigned to the port.	IpeVlanListOrZeror/w Type Constraints: `range: 0` `range: 512`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.11.1.4`
provDot1adPortCAccessVid C-Access VLAN ID. When the 'provDot1adPortVlanPortType' is 'trunkWithAccess' or 'accessOnly', the object returns access VLAN ID. Otherwise the object returns '0'.	IpeVlanIndexOrZeror/w Type Constraints: `range: 0..4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.20.11.1.5`

provQosEquipmentTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosEquipmentTable'

QoS Equipment Table

provQosEquipmentEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.1.1

QoS Equipment Entry

Indexes

provQosEquipmentIndex

Column	Syntax	OID
provQosEquipmentIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.1.1.1`
provQosEquipmentNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.1.1.2`
provQosEquipmentClassifyProfile Classify Profile Index value range : 0 - 3	Integer32r/w Constraints: `range: 0-3`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.1.1.3`
provQosEquipmentClassMode Configure the Equipment QoS Class mode. When the object is changed, provQosEgressPortSchedMode is initialized depends on the QoS Class mode. provQosEgressPortSchedMode is changed to sp4, when the qos mode is set to qos…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.1.1.4`
provQosEquipmentClassificationMode Classification Mode	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.1.1.5`

provQosClassifyTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosClassifyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosClassifyTable'

Qos Classify Table. This table defines classifier for the input
frames. The frames whose 'provQosClassifyField' is
'provQosClassifyPriority' are mapped to Internal Priority
'provQosClassifyPriority'.

provQosClassifyEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.2.1

Indexes

provQosClassifyProfileIndex provQosClassifyEntryIndex

Column	Syntax	OID
provQosClassifyProfileIndex Index of this table.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.1`
provQosClassifyEntryIndex Index of this table.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.2`
provQosClassifyNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.3`
provQosClassifyField QoS Classify Field. This object specifies classify field such as CoS value, DSCP value. If the value of this object is 'other', the entry acts as default entry. i.e. the 'other' entry matches all frames which are not ma…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.4`
provQosClassifyPriority QoS Classify Priority (value).	Integer32r/w Constraints: `range: -1-63`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.5`
provQosClassifyInternalPriority QoS Classify Internal Priority. The frames which are matched to the entry are mapped to the internal prioiry specified by this object.	Integer32r/w Constraints: `range: -1-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.6`
provQosClassifyRowstatus RowStatus of this table. The entry whose 'provQosClassifyEntryIndex' is 64 is created automatically by the agent, and cannot be created and deleted by manager.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.2.1.7`

provQosIngressPolicingProfileTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.3 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosIngressPolicingProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosIngressPolicingProfileTable'

QoS Ingress Policer Profile Table

provQosIngressPolicingProfileEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.3.1

QoS Ingress Policer Profile Entry

Indexes

provQosIngressPolicingProfileProfileIndex

Column	Syntax	OID
provQosIngressPolicingProfileProfileIndex Index of this table.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.1`
provQosIngressPolicingProfileNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.2`
provQosIngressPolicingProfileEir range : 0 - 1000000 (iPASOLINK200/400/1000series/EX/iX)	Integer32r/w Constraints: `range: 0-10000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.3`
provQosIngressPolicingProfileCir range : 0 - 1000000 (iPASOLINK200/400/1000series/EX/iX)	Integer32r/w Constraints: `range: 0-10000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.4`
provQosIngressPolicingProfileEbs EBS value range : 0Kbyte - 128KByte Default : 0KBy	Integer32r/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.5`
provQosIngressPolicingProfileCbs CBS value range : 1Kbyte - 64KByte Default : 24Kbyte	Integer32r/w Constraints: `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.3.1.6`

provQosIngressPolicingTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.4 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosIngressPolicingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosIngressPolicingTable'

QoS Ingress Policer Table

provQosIngressPolicingEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.4.1

QoS Ingress Policer Entry

Indexes

provQosIngressPolicingEntryIndex

Column	Syntax	OID
provQosIngressPolicingEntryIndex Index of this table.	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.1`
provQosIngressPolicingEntryNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.2`
provQosIngressPolicingEntryPortNumber Port Number value range : 0 - 0x7FFFFFFF, unuse(-1) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: -1-2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.3`
provQosIngressPolicingEntryVlanNumber VLAN Number value range : 1 - 4094, unuse(-1) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: -1--1` `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.4`
provQosIngressPolicingEntryPriorityNumber Internal Priority value range : 0 - 7, unuse(-1) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: -1-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.5`
provQosIngressPolicingEntryProfileNumber Policer Profile Number value range : 1 - 16 (iPASOLINK200/400/1000series/EX/iX) 1 - 64 (iPASOLINK VR series) unuse(-1) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: -1--1` `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.6`
provQosIngressPolicingEntryMplsLabel QoS Ingress Policing Entry MPLS Label	Integer32r/w Constraints: `range: -1-1048575`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.7`
provQosIngressPolicingEntryReserve2 reserved.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.8`
provQosIngressPolicingEntryReserve3 reserved.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.9`
provQosIngressPolicingEntryRowstatus RowStatus of this table.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.4.1.10`

provQosEgressPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.5 · 1 row entry · 13 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosEgressPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosEgressPortTable'

QoS Egress Port Table

provQosEgressPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.5.1

QoS Egress Port Entry

Indexes

provQosEgressPortIfIndex

Column	Syntax	OID
provQosEgressPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.1`
provQosEgressPortNEAddress FLAG=TRAP\|EVLOG	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.2`
provQosEgressPortSchedMode Scheduling Mode Changing provQosEgressPortSchedMode, provQosEgressPort- InternalPriority0Class to provQosEgressPortInternal- Priority7Class will change. FLAG=TRAP\|EVLOG	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.3`
provQosEgressPortDropMode Egress Drop Mode 1. WTD(Weighted Tail Drop) 2. WRED FLAG=TRAP\|EVLOG	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.4`
provQosEgressPortInternalPriority0Class Class of internal priority 0 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.5`
provQosEgressPortInternalPriority1Class Class of internal priority 1 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.6`
provQosEgressPortInternalPriority2Class Class of internal priority 2 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.7`
provQosEgressPortInternalPriority3Class Class of internal priority 3 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.8`
provQosEgressPortInternalPriority4Class Class of internal priority 4 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.9`
provQosEgressPortInternalPriority5Class Class of internal priority 5 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.10`
provQosEgressPortInternalPriority6Class Class of internal priority 6 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.11`
provQosEgressPortInternalPriority7Class Class of internal priority 7 value range : 0 - 7 (STD : 0 - 3)(2xSP : 0 - 1 / other : 0 - 3) FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.12`
provQosEgressPortPortShaperRate This object configures Port base shaper rate. The acceptable range depends on physical bandwidth.	Integer32r/w Constraints: `range: 0-10000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.5.1.13`

provQosEgressTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.6 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosEgressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosEgressTable'

QoS Egress Class Table

provQosEgressEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.6.1

QoS Egress Class Entry

Indexes

provQosEgressIfIndex provQosEgressClassIndex

Column	Syntax	OID
provQosEgressIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.1`
provQosEgressClassIndex Index of this table.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.2`
provQosEgressClassNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.3`
provQosEgressClassShaperRate This object configures the Class based shaper rate. The acceptable range depends on the physical port type.	Integer32r/w Constraints: `range: 0-10000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.4`
provQosEgressClassMinimumRate This object configures the Class based minimum rate.	Integer32 Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.5`
provQosEgressClassDWRRWeight Class Shaper Weight value range : 1 - 127 Default : 1 FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 1-127`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.6`
provQosEgressQueueLength Queue Length per Class.	Integer32r/w Constraints: `range: 16-1024`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.7`
provQosEgressWtdYellowFrameThreshold WTD Yellow Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 10-100`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.8`
provQosEgressWredYellowFrameThreshold WRED Yellow Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 10-100`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.9`
provQosEgressWredGreenFrameThreshold WRED Green Frame Threshold value range : 10% - 100% Default : 70% FLAG=TRAP\|EVLOG	Integer32r/w Constraints: `range: 10-100`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.6.1.10`

provQosFloodControlEquipmentTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.7 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosFloodControlEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosFloodControlEquipmentTable'

provQosFloodControlEquipmentEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.7.1

Indexes

provQosFloodControlEquipmentIndex

Column	Syntax	OID
provQosFloodControlEquipmentIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.7.1.1`
provQosFloodControlEquipmentNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.7.1.2`
provQosFloodControlEquipmentFrameTypeobsolete Frame Type Values: unknownUnicast(1), multicast(2), broadcast(3)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.21.7.1.3`
provQosFloodControlEquipmentRate Class Shaper Rate value range : 1Mbps - 1000Mbps	kbpsInteger32r/w Constraints: `range: 1000-1000000`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.7.1.4`

provQosFloodControlTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.8 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosFloodControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosFloodControlTable'

provQosFloodControlEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.8.1

Indexes

provQosFloodControlIfIndex

Column Syntax OID

provQosFloodControlIfIndex

Index of this table.

provQosFloodControlNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.21.8.1.1

reserved.

provQosFloodControlEnabled

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.21.8.1.2

provQosFloodControlFrameTypeobsolete

Frame Type
Values: unknownUnicast(1), multicast(2), broadcast(3)

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.5.21.8.1.3

Flood Control Enable/Disable
Values: invalid(0), disable(1), enable(2)

provQosPortClassifyIfIndex

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.21.8.1.4

provQosPortClassifyTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.9 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosPortClassifyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosPortClassifyTable'

This table contains the classify mode for port base QoS.

provQosPortClassifyEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.9.1

Indexes

Column	Syntax	OID
provQosPortClassifyIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.21.9.1.1`
provQosPortClassifyNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.9.1.2`
provQosPortClassifyField This object configures the port base QoS mode. when the object is configured as 'port' mode, the system classifies all frames which are received on the port as 'provQosPortClassifyPriority'. On 'ctagCos' mode, the syste…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.21.9.1.3`
provQosPortClassifyPriority Internal Priority for port base Qos. When the classifying schema is not applicable to received frames, the frames are classified as 'provQosPortClassifyPriority'.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.9.1.4`

provQosPortClassifyDscpTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.10 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosPortClassifyDscpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosPortClassifyDscpTable'

This table contains the mapping of DSCP value to internal
Priority. This configuration is applicable only when the system
is running on the port base QoS mode.

provQosPortClassifyDscpEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.10.1

Indexes

provQosPortClassifyDscpProfileIndex provQosPortClassifyDscpEntryIndex

Column	Syntax	OID
provQosPortClassifyDscpProfileIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.10.1.1`
provQosPortClassifyDscpEntryIndex Index of this table.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.10.1.2`
provQosPortClassifyDscpNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.10.1.3`
provQosPortClassifyDscpPriority This object specifies the DSCP value for DCSP to internal priority mapping. And this object acts as read-only object, this means the system cannot accept the change request to this object.	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.10.1.4`
provQosPortClassifyDscpInternalPriority Internal Priority value which is assigned to frames whose DSCP value is 'provQosPortClassifyPortDscpPriority'.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.10.1.5`

provQosVlanClassifyDefaultTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.11 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosVlanClassifyDefaultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosVlanClassifyDefaultTable'

This table contains the Default internal priority for VLAN base
QoS mode.

provQosVlanClassifyDefaultEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.11.1

Indexes

provQosVlanClassifyDefaultIndex

Column	Syntax	OID
provQosVlanClassifyDefaultIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.11.1.1`
provQosVlanClassifyDefaultNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.11.1.2`
provQosVlanClassifyDefaultPriority Internal priority which is assigned to the untag frames. Note) tagged frames whose VLAN ID is not configured in 'provVlanClassifyTable' are assigned based on its Cos value.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.5.21.11.1.3`

provQosVlanClassifyTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.21.12 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provQosVlanClassifyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provQosVlanClassifyTable'

This table contains the mapping of VLAN ID to Internal priority.
This configuration is applicable only when the system is running
on VLAN base QoS mode.

provQosVlanClassifyEntry row .1.3.6.1.4.1.119.2.3.69.501.5.21.12.1

Indexes

provQosVlanClassifyProfileIndex provQosVlanClassifyEntryIndex

Column Syntax OID

provQosVlanClassifyProfileIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.1

provQosVlanClassifyEntryIndex

Index of this table.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.2

provQosVlanClassifyNEAddress

reserved.

provQosVlanClassifyVlanIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.3

this object configures the VLAN ID for VLAN ID to internal
priority mapping.

IpeVlanIndexr/w

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.4

provQosVlanClassifyInternalPriority

Internal priority which is assigned to the frames whose VLAN ID
is 'provQosVlanClassifyEntryIndex'.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.5

provQosVlanClassifyRowStatus

This object is used for create a new row or delete an existing
row.

provRstpExtBridgeNEAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.21.12.1.6

provRstpExtBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.23.1 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provRstpExtBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provRstpExtBridgeTable'

provRstpExtBridgeEntry row .1.3.6.1.4.1.119.2.3.69.501.5.23.1.1

Indexes

provRstpExtBridgeIndex

Column Syntax OID

provRstpExtBridgeIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.2

provRstpExtBridgeEnable

RSTP enable/disable

provRstpExtBridgeRstpMstpVersion

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.3

STP Mode

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.4

provRstpExtBridgeMaxAge

Max Age Timer

Integer32r/w

Constraints:
range: 6-40

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.5

provRstpExtBridgeHelloTime

Hello Timer

Integer32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.6

provRstpExtBridgeForwardDelay

Forwarding Delay Timer

Integer32r/w

Constraints:
range: 4-30

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.7

provRstpExtBridgePriority

Bridgw Priority

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.8

provRstpExtBridgeTxHoldCount

STP TX Hold Count (RSTP)

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.119.2.3.69.501.5.23.1.1.9

provRstpExtPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.23.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provRstpExtPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provRstpExtPortTable'

provRstpExtPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.23.2.1

Indexes

provRstpExtPortifIndex

Column Syntax OID

provRstpExtPortifIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.1

provRstpExtPortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.2

provRstpExtPortPriority

STP Port Priority (RSTP)

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.3

provRstpExtPortEnable

RSTP Enable

provRstpExtPortAdminEdgePort

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.4

Edge Port (RSTP)

provRstpExtPortAdminPointToPoint

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.5

PtoP Port (RSTP)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.6

provRstpExtPortAdminPathCost

STP Port Path Cost (RSTP)

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.119.2.3.69.501.5.23.2.1.7

provEthOamMegTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.1 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamMegTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamMegTable'

Meg Setting Table

provEthOamMegEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.1.1

Indexes

provEthOamMegIndex

Column Syntax OID

provEthOamMegIndex

Index of this table.

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.1

provEthOamMegNEAddress

IP Address

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.2

provEthOamMegID

Meg ID(0-43 Octet String)

OctetStringr/w

Constraints:
range: 0-43

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.3

provEthOamMegLevel

Meg Level(0-7)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.4

provEthOamMegPeriod

CCM Frame Transmit Period(1-6)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.5

provEthOamMegRowStatus

Entry Status

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.6

provEthOamMegShortID

Short Meg ID(0-43 Octet String)

OctetStringr/w

Constraints:
range: 0-43

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.7

provEthOamMegCcmEnabled

CCM Transmit/Receive Setting

provEthOamMipIndex provEthOamMipIfIndex provEthOamMipVld provEthOamMipMegLevel

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.8

provEthOamMegCcmPriority

CCM Frame Priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.119.2.3.69.501.5.24.1.1.9

provEthOamMipTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamMipTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamMipTable'

Mip Setting Table

provEthOamMipEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.2.1

Indexes

Column	Syntax	OID
provEthOamMipIndex Index of this table.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.1`
provEthOamMipIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.2`
provEthOamMipVld Vlan Id(1-4094, Untag=0)	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.3`
provEthOamMipMegLevel Meg Level(0-7)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.4`
provEthOamMipNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.5`
provEthOamMipRowStatus Entry Status	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.24.2.1.6`

provEthOamMepTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.3 · 1 row entry · 16 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamMepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamMepTable'

Mep Setting Table

provEthOamMepEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.3.1

Indexes

provEthOamMepIndex

Column Syntax OID

provEthOamMepIndex

Index of this table.

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.1

provEthOamMepNEAddress

IP Address

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.2

provEthOamMepIfIndex

Ifindex

IF-MIBInterfaceIndexr/w

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.3

provEthOamMepVld

Vlan Id(1-4094, Untag=0)

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.4

provEthOamMepMegIndex

Meg Index(1-128)

IpeMepIdr/w

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.5

provEthOamMepDirection

Mep Direction.
range: outside(iPASOLINK200/400/1000series/EX/iX),
outside,inside(iPASOLINK VR series)

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.6

provEthOamMepId

Mep Id(1-8191)

Integer32r/w

Constraints:
range: 1-8191

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.7

provEthOamMepCcmTransmitEnabledobsolete

CCM Transmit Setting

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.8

provEthOamMepCcmReceiveEnabledobsolete

CCM Receive Setting

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.9

provEthOamMepCcmPriorityobsolete

CCM Frame Priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.10

provEthOamMepAisTransmitEnabledobsolete

ETH-AIS Transmit Setting

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.11

provEthOamMepAisReceiveEnabledobsolete

ETH-AIS Receive Setting

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.12

provEthOamMepAisPeriodobsolete

ETH-AIS Frame Transmit Period

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.13

provEthOamMepAisMegIndexobsolete

ETH-AIS Frame Transmit MEG

IpeMepIdr/w

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.14

provEthOamMepAisPriorityobsolete

ETH-AIS Frame Priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.15

provEthOamMepRowStatus

Entry Status

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.3.1.16

provEthOamPeerListTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.4 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamPeerListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamPeerListTable'

Peer Mep Setting Table

provEthOamPeerListEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.4.1

Indexes

provEthOamPeerListIndex

Column Syntax OID

provEthOamPeerListIndex

Index of this table.

provEthOamPeerListNEAddress

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.1

IP Address

provEthOamPeerListMepIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.2

Own Mep Index(1-128)

IpeMepIdr/w

Type Constraints:
range: 1..128

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.3

provEthOamPeerListPeerMepId

Peer Mep Id(1-8191)

Integer32r/w

Constraints:
range: 1-8191

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.4

provEthOamPeerListCheckStatusEnableobsolete

Peer Mep CCM Receive setting

provEthOamPeerListRowStatus

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.5

Entry Status

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.24.4.1.6

provEthOamMipMappingTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.5 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamMipMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamMipMappingTable'

MIP Mapping Table

provEthOamMipMappingEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.5.1

Indexes

provEthOamMipMappingIfIndex provEthOamMipMappingVld provEthOamMipMappingMegLevel

Column	Syntax	OID
provEthOamMipMappingIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.24.5.1.1`
provEthOamMipMappingVld Vlan Id(1-4094, Untag=0)	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.5.1.2`
provEthOamMipMappingMegLevel Meg Level(0-7)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.5.24.5.1.3`
provEthOamMipMappingNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.5.1.4`
provEthOamMipMappingMipIndex Mip Index(1-32)	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.5.1.5`

provEthOamMepMappingTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.24.6 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provEthOamMepMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provEthOamMepMappingTable'

MEP Mapping Table

provEthOamMepMappingEntry row .1.3.6.1.4.1.119.2.3.69.501.5.24.6.1

Indexes

provEthOamMepMappingIfIndex provEthOamMepMappingVld provEthOamMepMappingMegIndex

Column	Syntax	OID
provEthOamMepMappingIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.24.6.1.1`
provEthOamMepMappingVld Vlan Id(1-4094, Untag=0)	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.6.1.2`
provEthOamMepMappingMegIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.6.1.3`
provEthOamMepMappingNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.6.1.4`
provEthOamMepMappingMepIndex Mep Index(1-128)	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.5.24.6.1.5`

provFdbEquipmentTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.27.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFdbEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFdbEquipmentTable'

This table contains the equipment level configuration for FDB
learning behaviours.

provFdbEquipmentEntry row .1.3.6.1.4.1.119.2.3.69.501.5.27.1.1

Indexes

provFdbEquipmentIndex

Column Syntax OID

provFdbEquipmentIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.1

provFdbEquipmentNEAddress

reserved.

provFdbEquipmentNumberOfLearningEntry

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.2

Number of maximum learning entries.

Integer32r/w

Constraints:
range: 1-32384

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.3

provFdbEquipmentLearningLimitEnable

Enabling notification for learning limit over.

provFdbEquipmentAgingTime

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.4

The aging time.
When the aging time for the destination address is expired, the
entry will be cleared.

Integer32r/w

Constraints:
range: 5-163680

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.5

provFdbEquipmentAgingEnable

Enabling FDB Aging.
When the object is set to 'disable', the aging function is
disabled, and the learned entries are never aged-out. Rebooting
agent or FDB clearing request can clear all entries.

provFdbEquipmentLearningLimitMode

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.6

Learning limit mode.
On 'normal' mode, when the learned entries exceed the value of
provFdbEquipmentNumberOfLearningEntry, the exceeded entries are
not learned and unknown frames are flooded to all ports.
On 'protect' m…

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.27.1.1.7

provFdbVlanTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.27.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFdbVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFdbVlanTable'

this table contains the vlan level configurations.

provFdbVlanEntry row .1.3.6.1.4.1.119.2.3.69.501.5.27.2.1

Indexes

provFdbVlanIndex

Column Syntax OID

provFdbVlanIndex

Index of this table.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.501.5.27.2.1.1

provFdbVlanNEAddress

reserved.

provFdbVlanNumberOfLearningEntry

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.27.2.1.2

Number of maximum learning entries per VLAN.

Integer32r/w

Constraints:
range: 1-32384

.1.3.6.1.4.1.119.2.3.69.501.5.27.2.1.3

provFdbVlanLearningLimitMode

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.27.2.1.4

provFdbVlanLearningLimitModeEnable

Enabling the learning limitation per VLAN.
When the value is set to 'disable', the available learning
entries for that VLAN are up to the amount of system entries, and
the limit mode is configured to the 'normal' mode.
…

provFdbStaticEntryIndex provFdbStaticVlanId provFdbStaticPortIfIndex

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.27.2.1.5

provFdbStaticEntryTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.27.3 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFdbStaticEntryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFdbStaticEntryTable'

provFdbStaticEntryEntry row .1.3.6.1.4.1.119.2.3.69.501.5.27.3.1

Indexes

Column	Syntax	OID
provFdbStaticEntryIndex Index of this table.	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.1`
provFdbStaticVlanId VLAN ID Value Range : 1-4094 FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.2`
provFdbStaticPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.3`
provFdbStaticNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.4`
provFdbStaticMacAddress MAC Address Valude Range : 00:00:00:00:00:00-FF:FF:FF:FF:FF:FF FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.5`
provFdbStaticRowStatus Rowstatus 1. active 4. createAndGo 6. destroy FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.27.3.1.6`

provFdbPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.27.4 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFdbPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFdbPortTable'

this table contains the port level configurations.

provFdbPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.27.4.1

Indexes

provFdbPortIfIndex

Column Syntax OID

provFdbPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.27.4.1.1

provFdbPortNEAddressobsolete

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.27.4.1.2

provFdbPortLearningLimit

Number of maximum learning entries per port.

Integer32r/w

Constraints:
range: 1-32384

.1.3.6.1.4.1.119.2.3.69.501.5.27.4.1.3

provFdbPortLimitMode

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.5.27.4.1.4

provFdbPortLimitEnable

Enabling the learning limitation per port.
When the value is set to 'disable', the available learning
entries for that port are up to the amount of system entries, and
the limit mode is configured to the 'normal' mode.
…

provLlfGroupIndex provLlfGroupIfIndex

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.27.4.1.5

provLlfGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.28.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provLlfGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provLlfGroupTable'

provLlfGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.5.28.1.1

Indexes

Column	Syntax	OID
provLlfGroupIndex Index of this table.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.5.28.1.1.1`
provLlfGroupIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.28.1.1.2`
provLlfGroupNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.28.1.1.3`
provLlfGroupPortEnable LLF Group Enable FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.28.1.1.4`
provLlfGroupRowStatus RowStatus 1. active 4. createAndGo 6. destroy FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.28.1.1.5`

provLlfPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.28.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provLlfPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provLlfPortTable'

provLlfPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.28.2.1

Indexes

provLlfPortIfIndex

Column	Syntax	OID
provLlfPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.28.2.1.1`
provLlfPortNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.28.2.1.2`
provLlfPortMode LLF Port Mode. 'trunk' means the port is connected to the peer, 'trunk' port only transfers the LLF request messages, the port status will not be changed by LLF. 'edgeShutdown' and 'edegOamSend' means the port will be a…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.28.2.1.3`
provLlfPortInfoForwarding LLF Info Fowarding Enable Default : enable FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.28.2.1.4`

provLlfGroupIgnoreTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.28.3 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provLlfGroupIgnoreTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provLlfGroupIgnoreTable'

provLlfGroupIgnoreEntry row .1.3.6.1.4.1.119.2.3.69.501.5.28.3.1

Indexes

provLlfGroupIgnoreIndex

Column	Syntax	OID
provLlfGroupIgnoreIndex Index of this table.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.5.28.3.1.1`
provLlfGroupIgnoreNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.28.3.1.2`
provLlfGroupIgnoreEnable LLF Info Ignore Enable Default : disable FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.28.3.1.3`

provFilterProfileTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.29.1 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFilterProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFilterProfileTable'

provFilterProfileEntry row .1.3.6.1.4.1.119.2.3.69.501.5.29.1.1

Indexes

provFilterProfileIndex

Column	Syntax	OID
provFilterProfileIndex Index of this table.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.1`
provFilterProfileNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.2`
provFilterEntryIndex1 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.3`
provFilterEntryIndex2 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.4`
provFilterEntryIndex3 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.5`
provFilterEntryIndex4 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.6`
provFilterEntryIndex5 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.7`
provFilterEntryIndex6 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.8`
provFilterEntryIndex7 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.9`
provFilterEntryIndex8 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.10`
provFilterEntryIndex9 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.11`
provFilterEntryIndex10 Filter Entry number which is assigned to this profile. The value 0 means that no Filter entry is assigned. To set the filter entry to the profile, set the filter entry number to this object. To unassign the filter entry…	Integer32r/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.12`
provFilterProfileName Administrative Name for the Filter Profile	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.68`
provFilterRowStatus RowStatus for this table. This object controls create and delete filter profile.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.1.1.69`

provFilterEntryTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.29.2 · 1 row entry · 15 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFilterEntryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFilterEntryTable'

provFilterEntryEntry row .1.3.6.1.4.1.119.2.3.69.501.5.29.2.1

Indexes

provFilterEntryIndex

Column	Syntax	OID
provFilterEntryIndex Index of this table.	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.1`
provFilterEntryNEAddress IP Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.2`
provFilterEntryModeobsolete Filter entry action:deny(1), permit(2) default:deny(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.3`
provFilterEntryTargetobsolete Filter Type:L2(1), L3(2) default:L2(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.4`
provFilterEntryDestMac Destination MAC Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.5`
provFilterEntryDestMacMask Destination MAC Address mask value FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.6`
provFilterEntrySrcMac Source MAC Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.7`
provFilterEntrySrcMacMask Source MAC Address mask value FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.8`
provFilterEntryEthertype EthetType FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	OctetStringr/w Constraints: `range: 2-2`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.9`
provFilterEntryEthertypeMask EthetType mask value FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	OctetStringr/w Constraints: `range: 2-2`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.10`
provFilterEntryCos CoS FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.11`
provFilterEntryCosMask CoS mask value FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.12`
provFilterEntryVlan VLAN-ID FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32r/w Constraints: `range: 1-4095`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.13`
provFilterEntryVlanMask VLAN-ID mask value FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32r/w Constraints: `range: 0-4095`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.14`
provFilterEntryRowStatus RowStatus 1. active 4. createAndGo 6. destroy FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.2.1.53`

provFilterPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.29.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFilterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFilterPortTable'

provFilterPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.29.3.1

Indexes

provFilterPortIndex

Column	Syntax	OID
provFilterPortIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.3.1.1`
provFilterPortNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.3.1.2`
provFilterIngressProfile Ingress Filter Profile Number. To assign the filter profile to this port, set the appropriate filter profile index to this object. To unassign the filter profile from this port, set 0. For iPASOLINK VR series, this obje…	Integer32r/w Constraints: `range: 0-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.3.1.3`
provFilterEgressProfileobsolete Egress Filter Profile Number. To assign the filter profile to this port, set the appropriate filter profile index to this object. To unassign the filter profile from this port, set 0. For iPASOLINK VR series, this objec…	Integer32r/w Constraints: `range: 0-64`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.3.1.4`

provFilterL2ProtoTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.29.4 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provFilterL2ProtoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provFilterL2ProtoTable'

provFilterL2ProtoEntry row .1.3.6.1.4.1.119.2.3.69.501.5.29.4.1

Indexes

provFilterL2ProtoIfIndex

Column	Syntax	OID
provFilterL2ProtoIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.1`
provFilterL2ProtoNEAddress IP Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.2`
provFilterL2ProtoBpduAction L2 Protocol Fream(BPDU) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.3`
provFilterL2ProtoLacpAction L2 Protocol Fream(LACP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.4`
provFilterL2ProtoPortAutheAction L2 Protocol Fream(Port Authe) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.5`
provFilterL2ProtoPBAction L2 Protocol Fream(PB) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.6`
provFilterL2ProtoLldpAction L2 Protocol Fream(LLDP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.7`
provFilterL2ProtoOtherMacAction L2 Protocol Fream(Other Mac) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.8`
provFilterL2ProtoGarpAction L2 Protocol Fream(GARP) Recive Action:discard(1),transparent(2) default:discard(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.29.4.1.9`

provETHPortFwdTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.29.5 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provETHPortFwdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provETHPortFwdTable'

provETHPortFwdEntry row .1.3.6.1.4.1.119.2.3.69.501.5.29.5.1

Indexes

provETHPortFwdIfIndex

Column Syntax OID

provETHPortFwdIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.29.5.1.1

provETHPortFwdNEAddressobsolete

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.29.5.1.2

provETHPortFwdIsolation

Port Isolate

Type Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.501.5.29.5.1.3

provETHPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.30.1 · 1 row entry · 11 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provETHPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provETHPortTable'

provETHPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.30.1.1

Indexes

provETHIfIndex

Column	Syntax	OID
provETHIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.1`
provETHPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.2`
provETHPortInterfaceType SFP type:fiber(1),copper(2) default:fiber(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.3`
provETHPortSpeed Setting this object to autonego will cause the interface which has the auto-negotiation signalling ability to be enabled. The other values represent the administratively-configured speed of the Medium.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.4`
provETHPortDuplex This object represents the administratively-configured operation-mode of the Medium when auto-negotiation is disable.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.5`
provETHPortFlowControl Flowcontrol setting:disable(1),enable(2) default:enable(2) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.6`
provETHPortMDIMDIX MDI setting:mdi(1),mdi-x(2) default:mdi(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.7`
provETHPortPortClose The administrative state of the interface.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.8`
provETHPortMirroring Mirror port type:none(1),mirroring(2),mirror(3) default:none(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.9`
provETHPortDirection Mirror fream direction:ingress(1),egress(2),both(3) default:ingress(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.10`
provETHPortName Port Name(0-32 characters) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.1.1.11`

provETHPortMtuTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.30.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provETHPortMtuTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provETHPortMtuTable'

provETHPortMtuEntry row .1.3.6.1.4.1.119.2.3.69.501.5.30.2.1

Indexes

provETHPortMtuIndex

Column	Syntax	OID
provETHPortMtuIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.2.1.1`
provETHPortMtuNEAddress IP Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.2.1.2`
provETHPortMtuFeMaxFrameSize FE Port MTU size FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32r/w Constraints: `range: 64-2000`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.2.1.3`
provETHPortMtuGbeMaxFrameSize GbE/XGbE Port MTU size FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Integer32r/w Constraints: `range: 64-9600`	`.1.3.6.1.4.1.119.2.3.69.501.5.30.2.1.4`

provSyncETHTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.31.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSyncETHTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSyncETHTable'

provSyncETHEntry row .1.3.6.1.4.1.119.2.3.69.501.5.31.1.1

Indexes

provSyncETHIndex

Column	Syntax	OID
provSyncETHIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.31.1.1.1`
provSyncETHNEAddress IP Address FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.31.1.1.2`
provSyncETHEnable SyncEther setting:disable(1),enable(2) default:disable(1) FLAG=TRAP\|EVLOG LOGITEM='%s' LOGSTATUS='%s'	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.31.1.1.3`

provSyncETHPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.31.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provSyncETHPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provSyncETHPortTable'

provSyncETHPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.31.2.1

Indexes

provSyncETHPortIfIndex

Column	Syntax	OID
provSyncETHPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.5.31.2.1.1`
provSyncETHPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.31.2.1.2`
provSyncETHPortEnable Sync ETHER Enable	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.5.31.2.1.3`

provETHCardSetTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.32.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provETHCardSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provETHCardSetTable'

provETHCardSetEntry row .1.3.6.1.4.1.119.2.3.69.501.5.32.1.1

Indexes

provETHCardSetIndex

Column	Syntax	OID
provETHCardSetIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.32.1.1.1`
provETHCardSetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.32.1.1.2`
ethCardLineClkSelect Clock Select	Integer32r/w Constraints: `range: 1-4`	`.1.3.6.1.4.1.119.2.3.69.501.5.32.1.1.3`

provStm1ApsTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.33.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provStm1ApsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provStm1ApsTable'

provStm1ApsEntry row .1.3.6.1.4.1.119.2.3.69.501.5.33.1.1

Indexes

provStm1ApsIfIndex

Column Syntax OID

provStm1ApsIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.1

provStm1ApsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.2

apsLockinSetting

Lock-in Usage

Type Values:

0	invalid
1	notUsed
2	used

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.3

apsDetectionTime

Detection Time

minutesInteger32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.4

apsDetectionCount

Detection Count

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.5

apsClearLockinTime

Clear Lock-in Timer

10 minutesInteger32r/w

Constraints:
range: 1-288

.1.3.6.1.4.1.119.2.3.69.501.5.33.1.1.6

provCtrlExtTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.34.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provCtrlExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provCtrlExtTable'

provCtrlExtEntry row .1.3.6.1.4.1.119.2.3.69.501.5.34.1.1

Indexes

provCtrlExtIndex

Column	Syntax	OID
provCtrlExtIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.1`
provCtrlExtNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.2`
provCtrlExtOverTempAlarmRaise Upper Limit Over Temperature of Alarm Raise	0.1 degreeSNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.3`
provCtrlExtOverTempAlarmClear Upper Limit Over Temperature of Alarm Clear	0.1 degreeSNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.4`
provCtrlExtUnderTempAlarmRaise Lower Limit Under Temperature of Alarm Raise	0.1 degreeSNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.5`
provCtrlExtUnderTempAlarmClear Lower Limit Under Temperature of Alarm Clear	0.1 degreeSNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.5.34.1.1.6`

provLicenseAlarmTable

table

.1.3.6.1.4.1.119.2.3.69.501.5.45.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk provLicenseAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::provLicenseAlarmTable'

Configure License Alarm Detection Delay.
This table is only for internal use.

provLicenseAlarmEntry row .1.3.6.1.4.1.119.2.3.69.501.5.45.1.1

Indexes

provLicenseAlarmIndex

Column	Syntax	OID
provLicenseAlarmIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.5.45.1.1.1`
provLicenseAlarmNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.5.45.1.1.2`
provLicenseAlarmDetectionDelay License Alarm Detection Delay.	minutesInteger32r/w Constraints: `range: 0-5`	`.1.3.6.1.4.1.119.2.3.69.501.5.45.1.1.3`

maintCommonTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintCommonTable'

maintCommonEntry row .1.3.6.1.4.1.119.2.3.69.501.6.1.1.1

Indexes

maintCommonIndex

Column Syntax OID

maintCommonIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.6.1.1.1.1

maintCommonNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.1.1.1.2

maintMode

FLAG=TRAP|EVLOG
LOGITEM='MAINTENANCE'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.1.1.1.3

maintLANDeviceReset

FLAG=TRAP|EVLOG
LOGITEM='LAN DEVICE RESET'
LOGSTATUS='NOT SELECTED(1),RESET(2)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.1.1.1.4

maintShipment

This object provides function for restoring factory defaults.
This object behaves as 'writeOnly', and the returned value is not
guaranteed.
'provisioningClear' will clear provisioning data without softkey,
user/network …

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.1.1.1.5

maintCardTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintCardTable'

maintCardEntry row .1.3.6.1.4.1.119.2.3.69.501.6.1.2.1

Indexes

maintCardIndex

Column	Syntax	OID
maintCardIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.1.2.1.1`
maintCardNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.1.2.1.2`
maintCardReset Card Reset Control. When set 'reset' to this object, the card will reset itself. if the card has firmware, the card can accept the 'revert' request, and if set, the card will restart with the firmware installed in other…	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.1.2.1.3`

maintOduResetTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintOduResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintOduResetTable'

maintOduResetEntry row .1.3.6.1.4.1.119.2.3.69.501.6.1.3.1

Indexes

maintOduResetIfIndex

Column	Syntax	OID
maintOduResetIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.1.3.1.1`
maintOduResetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.1.3.1.2`
maintOduReset FLAG=TRAP\|EVLOG LOGITEM='MAINTENANCE' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.1.3.1.3`

maintIduResetTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintIduResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintIduResetTable'

maintIduResetEntry row .1.3.6.1.4.1.119.2.3.69.501.6.1.4.1

Indexes

maintIduResetIndex

Column	Syntax	OID
maintIduResetIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.1.4.1.1`
maintIduResetNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.1.4.1.2`
maintIduReset FLAG=TRAP\|EVLOG LOGITEM='MAINTENANCE' LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.1.4.1.3`

maintModemTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.2 · 1 row entry · 19 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintModemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintModemTable'

maintModemEntry row .1.3.6.1.4.1.119.2.3.69.501.6.2.1

Indexes

maintModemIfIndex

Column Syntax OID

maintModemIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.1

maintModemNEAddress

reserved.

maintModemATPCManualControl

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.2

FLAG=TRAP|EVLOG
LOGITEM='ATPC MANUAL CONTROL'
LOGSTATUS='AUTO(1),MANUAL(2)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.3

maintModemATPCManualContPower

FLAG=TRAP|EVLOG
LOGITEM='ATPC MANUAL POWER[dB]'
LOGSTATUS='%d'
TRAP=controlEvent

Integer32r/w

Constraints:
range: -380-400

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.4

maintModemTxMuteControl

FLAG=TRAP|EVLOG
LOGITEM='TX MUTE CONTROL'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

maintModemTxMuteContReleaseTime

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.5

FLAG=TRAP|EVLOG
LOGITEM='TX MUTE OFF TIMER'
LOGSTATUS='%d'
TRAP=controlEvent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.6

maintModemCW

FLAG=TRAP|EVLOG
LOGITEM='CW CONTROL'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.7

maintModemCWReleaseTime

FLAG=TRAP|EVLOG
LOGITEM='TX MUTE OFF TIMER'
LOGSTATUS='%d'
TRAP=controlEvent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.8

maintModemIFLoopback

FLAG=TRAP|EVLOG
LOGITEM='IF LOOPBACK'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

maintModemIFLoopbackReleaseTime

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.9

FLAG=TRAP|EVLOG
LOGITEM='TX MUTE OFF TIMER'
LOGSTATUS='%d'
TRAP=controlEvent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.10

maintModemRFLoopback

FLAG=TRAP|EVLOG
LOGITEM='RF LOOPBACK'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

maintModemRFLoopbackReleaseTime

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.11

FLAG=TRAP|EVLOG
LOGITEM='TX MUTE OFF TIMER'
LOGSTATUS='%d'
TRAP=controlEvent

maintModemTxModulationManualControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.12

maintModemForcedXPICCont

FLAG=TRAP|EVLOG
LOGITEM='XPIC CONTROL'
LOGSTATUS='AUTO(1),FORCED RESET(2)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.13

This object controls Tx Modulation.
The value 'psk8' is available only for the iPASOLINK EX. This
value is valid only when esModemChSpacing is 'cs500m'.

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.14

maintModemRFSubBandSelect

FLAG=TRAP|EVLOG
LOGITEM='RF SUB BAND SELECT'
LOGSTATUS='A(65),B(66),C(67),D(68),E(69),F(70),G(71),H(72),J(74),K(75),L(76),M(77),N(78),P(80),R(82),X(88)'
TRAP=controlEvent

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.15

maintModemL2Loopback1

This object controls Loopback function for L2 frames.
When the object is set to 'On', the L2 frames received from the
Radio Link are loopbacked.

maintModemL2Loopback1ReleaseTime

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.16

This object controls Release Time for L2 loopback1 function.
L2 loopback function will be released automatically when the
timer which is configured by this object is expired.

secondsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.17

maintModemL2Loopback2

This object controls Loopback function for L2 frames.
When the object is set to 'On', the L2 frames transmitted to the
Radio Link are loopbacked.

maintModemL2Loopback2ReleaseTime

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.18

This object controls Release Time for L2 loopback2 function.
L2 loopback function will be released automatically when the
timer which is configured by this object is expired.

secondsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.6.2.1.19

maintSwGroupTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.3 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintSwGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintSwGroupTable'

maintSwGroupEntry row .1.3.6.1.4.1.119.2.3.69.501.6.3.1

Indexes

maintSwGroupIfIndex

Column Syntax OID

maintSwGroupIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.1

maintSwGroupNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.2

maintTxSWControl

TX SW Manual Control

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.3

maintTxSWMode

TX SW Manual Control Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.4

maintRxSWControl

RX SW Manual Control

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.5

maintRxSWMode

RX SW Manual Control Status

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.6

maintDADEAdjust

FLAG=TRAP|EVLOG
LOGITEM='DADE ADJUST'
LOGSTATUS='DADE(1),OFFSET DADE(2),DADE OFF(3)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.7

maintDADEAdjustEnable

FLAG=TRAP|EVLOG
LOGITEM='DADE ADJUST ENABLE'
LOGSTATUS='OFF(1),ON(EXECUTING)(2)'
TRAP=statusChange

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.3.1.8

maintE1SystemTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.4 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintE1SystemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintE1SystemTable'

maintE1SystemEntry row .1.3.6.1.4.1.119.2.3.69.501.6.4.1

Indexes

maintE1SystemIfIndex

Column Syntax OID

maintE1SystemIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.6.4.1.1

maintE1SystemNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.4.1.2

maintE1ChLoopback1

FLAG=TRAP|EVLOG
LOGITEM='E1 CH LOOPBACK1'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.4.1.3

maintE1ChLoopback2

FLAG=TRAP|EVLOG
LOGITEM='E1 CH LOOPBACK2'
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.4.1.4

maintStm1PortTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.5.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintStm1PortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintStm1PortTable'

maintStm1PortEntry row .1.3.6.1.4.1.119.2.3.69.501.6.5.1.1

Indexes

maintStm1PortIfIndex

Column Syntax OID

maintStm1PortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.1

maintStm1PortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.2

maintStm1ChLoopback1

FLAG=TRAP|EVLOG
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.3

maintStm1ChLoopback2

FLAG=TRAP|EVLOG
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.4

maintStm1ForcedLSCont

FLAG=TRAP|EVLOG
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

maintStm1ALSMuanualRestart

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.5

FLAG=TRAP|EVLOG
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.5.1.1.6

maintTimingSourceTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.6 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintTimingSourceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintTimingSourceTable'

maintTimingSourceEntry row .1.3.6.1.4.1.119.2.3.69.501.6.6.1

Indexes

maintTimingSourceIndex

Column Syntax OID

maintTimingSourceIndex

Index of this table.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.6.6.1.1

maintTimingSourceNEAddress

reserved.

maintTimingSourceSwControl

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.6.1.2

FLAG=TRAP|EVLOG
LOGITEM='TIMING SOURCE SW CONTROL'
LOGSTATUS='NORMAL(1),MANUAL SW(2),FORCED SW(3)'
TRAP=controlEvent

Enumerationr/w

.1.3.6.1.4.1.119.2.3.69.501.6.6.1.3

maintTimingSourceLockOut

FLAG=TRAP|EVLOG
LOGSTATUS='OFF(1),ON(2)'
TRAP=controlEvent

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.6.1.4

maintSncpSwTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.8 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintSncpSwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintSncpSwTable'

maintSncpSwEntry row .1.3.6.1.4.1.119.2.3.69.501.6.8.1

Indexes

maintSncpSwIndex

Column	Syntax	OID
maintSncpSwIndex Index of this table.	Integer32 Constraints: `range: 1-2352`	`.1.3.6.1.4.1.119.2.3.69.501.6.8.1.1`
maintSncpSwNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.8.1.2`
maintSncpSwControl SNCP Manual SW Control	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.8.1.3`
maintSncpSwMode SNCP Manual SW Control Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.8.1.4`

maintFdbTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintFdbTable'

This table contains the maintenance functions for FDB entries.

maintFdbEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1

Indexes

maintFdbIndex

Column Syntax OID

maintFdbIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.1

maintFdbNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.2

maintFdbTableClearAll

FDB clear request.
When the object is set to 'on', the all forwarding database
entries will be cleared.

maintFdbGetLearningInfoExecute

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.3

maintFdbTableClearPort

FDB clear request per port.
Setting to interface index of target port, the forwarding
database entries for the specified port will be cleared.

IF-MIBInterfaceIndexr/w

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.4

maintFdbTableClearVlan

FDB clear request per VLAN.
Setting to VLAN ID of target VLAN, the forwarding database
entries for the specified VLAN will be cleared.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.5

Request to export dynamic FDB entries.
The system provides the file interface for dynamic FDB entries.
The agent start to export dynamic FDB entries to file, when the
object is set to 'on'. After completing to export, t…

maintFdbClearLearningInfoExecute

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.6

Request to delete the exported FDB file.
The exported FDB file is created on the internal file system, the
manager should delete that file using this object.

maintEthOamLbResultMepIndex

Type Values:

0	invalid
1	off
2	on

.1.3.6.1.4.1.119.2.3.69.501.6.9.1.1.1.7

maintEthOamLbTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLbTable'

ETH-LB Execution Management Table

maintEthOamLbEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1

Indexes

maintEthOamLbMepIndex

Column	Syntax	OID
maintEthOamLbMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.1`
maintEthOamLbNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.2`
maintEthOamLbExecute ETH-LB Execution	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.3`
maintEthOamLbDesAddress Destination MAC Address	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.4`
maintEthOamLbCount Transmit Count(1-127)	Integer32r/w Constraints: `range: 1-127`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.5`
maintEthOamLbPeriod Transmit Period(1-10)	Integer32r/w Constraints: `range: 1-10`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.6`
maintEthOamLbSize PDU Size(64-9600)	Integer32r/w Constraints: `range: 64-9600`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.7`
maintEthOamLbPriority Priority(0-7)	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.1.1.8`

maintEthOamLbResultTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2 · 1 row entry · 17 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLbResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLbResultTable'

ETH-LB Result Table

maintEthOamLbResultEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1

Indexes

Column	Syntax	OID
maintEthOamLbResultMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.1`
maintEthOamLbResultNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.2`
maintEthOamLbResultIfIndex Ifindex	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.3`
maintEthOamLbResultMacAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.4`
maintEthOamLbResultVid Mep's Vlan Id	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.5`
maintEthOamLbResultMegId Mep's MEG ID	OctetString Constraints: `range: 1-43`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.6`
maintEthOamLbResultMepId Mep Id	Integer32 Constraints: `range: 1-8191`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.7`
maintEthOamLbResultMegLevel Mep's Meg Level	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.8`
maintEthOamLbResultDaType MAC Address Type(Multicast or Unicast)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.9`
maintEthOamLbResultSuccess ETH-LB Success Count	Integer32 Constraints: `range: 0-127`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.10`
maintEthOamLbResultFail ETH-LB Fail Count(for UnicastLB only)	Integer32 Constraints: `range: 0-127`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.11`
maintEthOamLbResultMinTime Minimum Round Trip Time(for UnicastLB only)	Integer32 Constraints: `range: 0-5000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.12`
maintEthOamLbResultMaxTime Maximum Round Trip Time(for UnicastLB only)	Integer32 Constraints: `range: 0-5000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.13`
maintEthOamLbResultAveTime Average Round Trip Time(for UnicastLB only)	Integer32 Constraints: `range: 0-5000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.14`
maintEthOamLbResultDevTime Deflection Round Trip Time(for UnicastLB only)	Integer32 Constraints: `range: 0-5000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.15`
maintEthOamLbResultLastUpTime ETH-LB Start Time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.16`
maintEthOamLbResultExecStatus ETH-LB Execution Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.2.1.17`

maintEthOamLbResultMacTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLbResultMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLbResultMacTable'

ETH-LB Result MAC Address Table

maintEthOamLbResultMacEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1

Indexes

maintEthOamLbResultMacMepIndex maintEthOamLbResultMacNumber

Column	Syntax	OID
maintEthOamLbResultMacMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.1`
maintEthOamLbResultMacNumber ETH-LBR Receive Number	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.2`
maintEthOamLbResultMacNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.3`
maintEthOamLbResultMac ETH-LB Result(for UnicastLB only)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.4`
maintEthOamLbResultMacSrcAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.5`
maintEthOamLbResultMacTime Round Trip Time	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.3.1.6`

maintEthOamLtTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLtTable'

ETH-LT Execution Management Table

maintEthOamLtEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1

Indexes

maintEthOamLtMepIndex

Column	Syntax	OID
maintEthOamLtMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.1`
maintEthOamLtNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.2`
maintEthOamLtExecute ETH-LT Execution	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.3`
maintEthOamLtTargetAddress Target MAC Address	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.4`
maintEthOamLtTtl Time To Live(1-255)	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.5`
maintEthOamLtPriority Priority(0-7)	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.4.1.6`

maintEthOamLtResultTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5 · 1 row entry · 12 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLtResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLtResultTable'

ETH-LT Result Table

maintEthOamLtResultEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1

Indexes

maintEthOamLtResultMepIndex

Column	Syntax	OID
maintEthOamLtResultMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.1`
maintEthOamLtResultNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.2`
maintEthOamLtResultIfIndex Ifindex	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.3`
maintEthOamLtResultMacAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.4`
maintEthOamLtResultVid Mep's Vlan Id	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.5`
maintEthOamLtResultMegId Mep's MEG ID	OctetString Constraints: `range: 1-43`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.6`
maintEthOamLtResultMepId Mep Id	Integer32 Constraints: `range: 1-8191`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.7`
maintEthOamLtResultMegLevel Mep's Meg Level	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.8`
maintEthOamLtResultTtl TTL	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.9`
maintEthOamLtResultReceive ETH-LTR Receive Count	Integer32 Constraints: `range: 0-16`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.10`
maintEthOamLtResultLastUpTime ETH-LT Start Time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.11`
maintEthOamLtResultExecStatus ETH-LT Execution Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.5.1.12`

maintEthOamLtResultMacTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLtResultMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLtResultMacTable'

ETH-LT Result MAC Address Table

maintEthOamLtResultMacEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1

Indexes

maintEthOamLtResultMacMepIndex maintEthOamLtResultMacNumber

Column	Syntax	OID
maintEthOamLtResultMacMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.1`
maintEthOamLtResultMacNumber ETH-LTR Receive Number	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.2`
maintEthOamLtResultMacNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.3`
maintEthOamLtResultMacTtl Time To Live	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.4`
maintEthOamLtResultMacSrcAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.5`
maintEthOamLtResultMacRlyAct RelayAction	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.6.1.6`

maintEthOamDmTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamDmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamDmTable'

ETH-DM Execution Management Table

maintEthOamDmEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1

Indexes

maintEthOamDmMepIndex

Column	Syntax	OID
maintEthOamDmMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.1`
maintEthOamDmNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.2`
maintEthOamDmExecute ETH-DM Execution	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.3`
maintEthOamDmDesAddress Destination MAC Address	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.4`
maintEthOamDmCount ETH-DM Transmit Count(1-500)	Integer32r/w Constraints: `range: 1-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.5`
maintEthOamDmPeriodS ETH-DM Transmit Period Second	secondsInteger32r/w Constraints: `range: 1-10`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.6`
maintEthOamDmPriority Priority(0-7)	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.7.1.7`

maintEthOamDmResultTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8 · 1 row entry · 18 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamDmResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamDmResultTable'

ETH-DM Result Table

maintEthOamDmResultEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1

Indexes

maintEthOamDmResultMepIndex

Column	Syntax	OID
maintEthOamDmResultMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.1`
maintEthOamDmResultNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.2`
maintEthOamDmResultIfIndex Ifindex	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.3`
maintEthOamDmResultSrcMacAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.4`
maintEthOamDmResultVid Mep's Vlan Id	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.5`
maintEthOamDmResultMegId Mep's MEG ID	OctetString Constraints: `range: 0-43`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.6`
maintEthOamDmResultMepId MEP ID	Integer32 Constraints: `range: 1-8191`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.7`
maintEthOamDmResultMegLevel Mep's Meg Level	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.8`
maintEthOamDmResultDesMacAddress Destination MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.9`
maintEthOamDmResultRequest ETH-DMM Transmit Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.10`
maintEthOamDmResultReceive ETH-DMR Receive Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.11`
maintEthOamDmResultMinTime Minimum Round Trip Time	microsecondsInteger32 Constraints: `range: 0-8388608`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.12`
maintEthOamDmResultMaxTime Maximum Round Trip Time	microsecondsInteger32 Constraints: `range: 0-8388608`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.13`
maintEthOamDmResultAveTime Average Round Trip Time	microsecondsInteger32 Constraints: `range: 0-8388608`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.14`
maintEthOamDmResultDevTime Deflection Round Trip Time	microsecondsInteger32 Constraints: `range: 0-8388608`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.15`
maintEthOamDmResultErrCount Error Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.16`
maintEthOamDmResultLastUpTime ETH-DM Start Time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.17`
maintEthOamDmResultExecStatus ETH-DM Execution Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.8.1.18`

maintEthOamLmTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLmTable'

ETH-LM Execution Management Table

maintEthOamLmEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1

Indexes

maintEthOamLmMepIndex

Column	Syntax	OID
maintEthOamLmMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.1`
maintEthOamLmNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.2`
maintEthOamLmExecute ETH-DM Execution	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.3`
maintEthOamLmDesAddress Destination MAC Address	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.4`
maintEthOamLmCount ETH-LM Transmit Count(1-500)	Integer32r/w Constraints: `range: 1-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.5`
maintEthOamLmPeriodS ETH-LM Transmit Period Second	Integer32r/w Constraints: `range: 1-10`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.6`
maintEthOamLmPriority Priority(0-7)	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.7`
maintEthOamLmTargetFrmPriority Target Frame Priority	Integer32r/w Constraints: `range: -1-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.9.1.8`

maintEthOamLmResultTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10 · 1 row entry · 22 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamLmResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamLmResultTable'

ETH-LM Result Table

maintEthOamLmResultEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1

Indexes

maintEthOamLmResultMepIndex

Column	Syntax	OID
maintEthOamLmResultMepIndex Index of this table.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.1`
maintEthOamLmResultNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.2`
maintEthOamLmResultIfIndex Ifindex	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.3`
maintEthOamLmResultSrcMacAddress MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.4`
maintEthOamLmResultVid Mep's Vlan Id	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.5`
maintEthOamLmResultMegId Mep's MEG ID	OctetString Constraints: `range: 0-43`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.6`
maintEthOamLmResultMepId MEP ID	Integer32 Constraints: `range: 1-8191`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.7`
maintEthOamLmResultMegLevel Mep's Meg Level	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.8`
maintEthOamLmResultDesMacAddress Destination MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.9`
maintEthOamLmResultRequest ETH-LMM Transmit Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.10`
maintEthOamLmResultReceive ETH-LMR Receive Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.11`
maintEthOamLmResultTxFramesNearEnd Transmit Frame Near Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.12`
maintEthOamLmResultRxFramesFarEnd Receive Frame Far Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.13`
maintEthOamLmResultTxFramesFarEnd Transmit Frame Far Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.14`
maintEthOamLmResultRxFramesNearEnd Receive Frame Near Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.15`
maintEthOamLmResultTxFrameLoss Transmit Frame Loss Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.16`
maintEthOamLmResultTxFLR Transmit Frame Loss Rate	0.1 percentInteger32 Constraints: `range: 0-1000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.17`
maintEthOamLmResultRxFrameLoss Receive Frame Loss Count	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.18`
maintEthOamLmResultRxFLR Receive Frame Loss Rate	0.1 percentInteger32 Constraints: `range: 0-1000`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.19`
maintEthOamLmResultErrCount Error Count	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.20`
maintEthOamLmResultLastUpTime ETH-LM Start Time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.21`
maintEthOamLmResultExecStatus ETH-LM Execution Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.10.1.22`

maintEthOamExecutionHistoryTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11 · 1 row entry · 11 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEthOamExecutionHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEthOamExecutionHistoryTable'

Execution History Table

maintEthOamExecutionHistoryEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1

Indexes

maintEthOamExecutionHistoryIndex

Column	Syntax	OID
maintEthOamExecutionHistoryIndex Index of this table.	Integer32 Constraints: `range: 1-15`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.1`
maintEthOamExecutionHistoryNEAddress IP Address	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.2`
maintEthOamExecutionMepIndex Mep Index(1-128) 0 is Non use.	IpeMepId Type Constraints: `range: 1..128`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.3`
maintEthOamExecutionType Execution Type(1:LB, 2:LT, 3:DM, 4:LM)	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.4`
maintEthOamExecutionDesAddress Destination MAC Address	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.5`
maintEthOamExecutionCount Transmit Count(LB:1-127, LT:Not Use, DM:1-500, LM:1-500)	Integer32 Constraints: `range: 0-500`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.6`
maintEthOamExecutionPduSize PDU Size(LB:60-9600, LT/DM/LM:Not Use)	Integer32 Constraints: `range: 0-9600`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.7`
maintEthOamExecutionTtl Time To live(LT:1-255, LB/DM/LM:Not Use)	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.8`
maintEthOamExecutionPeriodS Transmit Period Second(LB/DM/LM:1-10, LT:Not Use)	Integer32 Constraints: `range: 0-10`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.9`
maintEthOamExecutionPriority Priority(0-7)	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.10`
maintEthOamExecutionTime Execution Start Time	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.119.2.3.69.501.6.9.2.11.1.11`

maintRstpTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.9.3.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintRstpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintRstpTable'

maintRstpEntry row .1.3.6.1.4.1.119.2.3.69.501.6.9.3.1.1

Indexes

maintRstpBridgeIndex

Column	Syntax	OID
maintRstpBridgeIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.3.1.1.1`
maintRstpNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.3.1.1.2`
maintRstpModeClearStatus mode clear	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.9.3.1.1.3`

maintClearLogTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.10.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintClearLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintClearLogTable'

maintClearLogEntry row .1.3.6.1.4.1.119.2.3.69.501.6.10.1.1

Indexes

maintClearLogIndex

Column	Syntax	OID
maintClearLogIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.6.10.1.1.1`
maintLogGroupNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.10.1.1.2`
localLogClear FLAG=TRAP\|EVLOG LOGSTATUS='OFF(1),ON(2)' TRAP=controlEvent	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.10.1.1.3`

maintModemCardTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.12.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintModemCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintModemCardTable'

maintModemCardEntry row .1.3.6.1.4.1.119.2.3.69.501.6.12.1.1

Indexes

maintModemCardIndex

Column	Syntax	OID
maintModemCardIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.12.1.1.1`
maintModemCardNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.12.1.1.2`
maintModemCardLockinRequest Lock-in Control	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.12.1.1.3`

maintEOWTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.16.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEOWTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEOWTable'

This table contains EOW Call SW Control.

maintEOWEntry row .1.3.6.1.4.1.119.2.3.69.501.6.16.1.1

Indexes

maintEOWIndex

Column	Syntax	OID
maintEOWIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.6.16.1.1.1`
maintEOWNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.16.1.1.2`
maintCallSwControl Call SW Control.	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.16.1.1.3`

maintEOWIfTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.16.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintEOWIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintEOWIfTable'

This table contains EOW Buzzer Contorl.

maintEOWIfEntry row .1.3.6.1.4.1.119.2.3.69.501.6.16.2.1

Indexes

maintEOWIfIndex

Column	Syntax	OID
maintEOWIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.16.2.1.1`
maintEOWIfNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.16.2.1.2`
maintEOWIfSwControl EOW Buzzer Contorl	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.16.2.1.3`

maintStm1ApsTable

table

.1.3.6.1.4.1.119.2.3.69.501.6.33.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk maintStm1ApsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::maintStm1ApsTable'

maintStm1ApsEntry row .1.3.6.1.4.1.119.2.3.69.501.6.33.1.1

Indexes

maintStm1ApsIfIndex

Column	Syntax	OID
maintStm1ApsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.6.33.1.1.1`
maintStm1ApsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.6.33.1.1.2`
maintApsSwControl APS Manual SW Control	Enumerationr/w	`.1.3.6.1.4.1.119.2.3.69.501.6.33.1.1.3`
maintApsSwMode APS Manual SW Control Status	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.6.33.1.1.4`

invMainInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.1.1 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invMainInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invMainInfoTable'

Equipment Inventory Information (IDU) - Main Board / Ctrl Card

invMainInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.1.1.1

Indexes

invMainInfoIndex

Column	Syntax	OID
invMainInfoIndex Index of this table.	Integer32 Constraints: `range: 1-1` `range: 17-18`	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.1`
invMainInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.2`
invMainName Main Board / Ctrl Card Name.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.3`
invMainCodeNo Main Board / Ctrl Card Code No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.4`
invMainSerialNo Main Board / Ctrl Card Serial No.	OctetStringr/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.5`
invMainManufacturedDate Main Board / Ctrl Card Manufactured Date	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.6`
invMainFirmVersion Main Board / Ctrl Card Firmware Version.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.7`
invMainFirmVersionUncurrent Main Board / Ctrl Card Firmware Version (Uncurrent).	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.8`
invMainCardHardVersion Main Board / Ctrl Card Hardware Version.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.1.1.9`

invCardInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.1.2 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invCardInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invCardInfoTable'

Equipment Inventory Information (IDU) - Option / Universal Card

invCardInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.1.2.1

Indexes

invCardInfoIndex

Column	Syntax	OID
invCardInfoIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.1`
invCardInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.2`
invCardName Card Name. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.3`
invCardCodeNo Card Code No. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.4`
invCardSerialNo Card Serial No. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.5`
invCardManufacturedDate Card Manufactured Date. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.6`
invCardFirmVersion Card Firmware Version. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.7`
invCardHardVersion Card Hardware Version. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.1.2.1.8`

invFPGAInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invFPGAInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invFPGAInfoTable'

Equipment Inventory Information (IDU) - FPGA

invFPGAInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.2.1

Indexes

invFPGAInfoIndex

Column	Syntax	OID
invFPGAInfoIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.2.1.1`
invFPGAInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.2.1.2`
invFPGAName FPGA Name. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.2.1.3`
invFPGACodeNo FPGA Code No. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.2.1.4`
invFPGAHardVersion FPGA Version. when the card is removed, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.2.1.5`

invModuleInfoOduTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.3 · 1 row entry · 40 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invModuleInfoOduTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invModuleInfoOduTable'

Equipment Inventory Information (ODU)

invModuleInfoOduEntry row .1.3.6.1.4.1.119.2.3.69.501.7.3.1

Indexes

invModuleInfoOduIfIndex

Column	Syntax	OID
invModuleInfoOduIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.1`
invModuleInfoOduNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.2`
invOduCardName ODU Name. when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.3`
invOduCardCodeNo ODU Code Name. when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.4`
invOduCardHardVersion ODU Hardware version. when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.5`
invOduCardSerialNo ODU Serial No. when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.6`
invOduCardManufacturedDate ODU Manufactured Date. when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.7`
invOduCardFirmCurrentVersion ODU Firmware information (current). when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.8`
invOduCardFirmUncurrentVersion ODU Firmware information (uncurrent). when the ODU is removed or disconnected, the value will be changed to '**'.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.9`
invOduProvRangeATPCMax ODU Frequency Information - Range ATPC MAX (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.10`
invOduProvRangeATPCMin ODU Frequency Information - Range ATPC MIN (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.11`
invOduProvRangeMTPCMax ODU Frequency Information - Range MTPC MAX (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.12`
invOduProvRangeMTPCMin ODU Frequency Information - Range MTPC MIN (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.13`
invOduProvRangeRxThresholdMax ODU Frequency Information - Range RX Threshold MAX (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.14`
invOduProvRangeRxThresholdMin ODU Frequency Information - Range RX Threshold MIN (dbm)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.15`
invOduProvRangeHysteresisPermit ODU Frequency Information - Range Hysteresis Permit	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.16`
invOduProvRangeHysteresisMax ODU Range Hysteresis MAX (dB)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.17`
invOduProvRangeHysteresisMin ODU Range Hysteresis MIN (dB)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.18`
invOduFreqInfoTxStartFrequency ODU Frequency Information - TX Start Frequency (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.19`
invOduFreqInfoTxStopFrequency ODU Frequency Information - TX Stop Frequency (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.20`
invOduFreqInfoRxStartFrequency ODU Frequency Information - RX Start Frequency (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.21`
invOduFreqInfoRxStopFrequency ODU Frequency Information - RX Stop Frequency (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.22`
invOduFreqInfoFrequencyStep ODU Frequency Information - Frequency Step (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.23`
invOduFreqInfoShiftFrequency ODU Frequency Information - Shift Frequency (MHz)	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.24`
invOduFreqInfoUpperLower ODU Frequency Information - Upper / Lower	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.25`
invOduFreqInfoTxPhase ODU Frequency Information - TX Phase	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.26`
invOduFreqInfoRxPhase ODU Frequency Information - RX Phase	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.27`
invOduFreqInfoSubBand ODU Frequency Information - Sub Band	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.28`
invOduFreqInfoTxRxIndependence ODU Frequency Information - TX / RX Independence	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.29`
invOduFreqInfoSupportedIpe ODU Frequency Information - Supported iPASOLINK	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.30`
invOduFreqInfoSubBand1 ODU Frequency Information - Sub Band 01	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.31`
invOduFreqInfoSubBand2 ODU Frequency Information - Sub Band 02	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.32`
invOduFreqInfoSubBand3 ODU Frequency Information - Sub Band 03	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.33`
invOduFreqInfoSubBand4 ODU Frequency Information - Sub Band 04	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.34`
invOduFreqInfoSubBand5 ODU Frequency Information - Sub Band 05	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.35`
invOduFreqInfoSubBand6 ODU Frequency Information - Sub Band 06	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.36`
invOduFreqInfoSubBand7 ODU Frequency Information - Sub Band 07	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.37`
invOduFreqInfoSubBand8 ODU Frequency Information - Sub Band 08	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.38`
invOduFreqInfoSubBand9 ODU Frequency Information - Sub Band 09	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.39`
invOduFreqInfoSubBand10 ODU Frequency Information - Sub Band 10	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.3.1.40`

invUpdateInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.4 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invUpdateInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invUpdateInfoTable'

Inventory Update Information

invUpdateInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.4.1

Indexes

invUpdateInfoIndex

Column	Syntax	OID
invUpdateInfoIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.7.4.1.1`
invUpdateInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.4.1.2`
invUpdateInfoSummary Inventory Update Information Summary	OctetString Constraints: `range: 12-12` `range: 20-20`	`.1.3.6.1.4.1.119.2.3.69.501.7.4.1.3`

invSfpInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.5 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invSfpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invSfpInfoTable'

SFP / XFP Information

invSfpInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.5.1

Indexes

invSfpInfoIfIndex

Column	Syntax	OID
invSfpInfoIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.1`
invSfpInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.2`
invSfpVendorName Vendor Name	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.3`
invSfpVendorPn Part Number	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.4`
invSfpVendorVer Vendor Revision Number	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.5`
invSfpVendorSn Vendor Serial Number	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.6`
invSfpType SFP Type	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.7`
invSfpManufacturedDate SFP Manufactured Date	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.8`
invSfpSupportedWavelength Wavelength supported by SFP/XFP/SFP+. If the SFP media type is not optical, this object will show the value '0'.	nmSNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.9`
invSfpSupportedLinkLength Link length supported by SFP/XFP/SFP+.	kmSNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.5.1.10`

invSoftkeyInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.6 · 1 row entry · 15 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invSoftkeyInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invSoftkeyInfoTable'

Software Key Information.

invSoftkeyInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.6.1

Indexes

invSoftkeyInfoIndex

Column	Syntax	OID
invSoftkeyInfoIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.1`
invSoftkeyInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.2`
invSoftkeySerialNo Software Key Serial No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.3`
invSupportabilityInfoFw Supportability (Firmware)	OctetString Constraints: `range: 32-32` `range: 40-40` `range: 52-52` `range: 68-68`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.4`
invSupportabilityInfoKey Supportability (Software Key)	OctetString Constraints: `range: 32-32` `range: 40-40` `range: 52-52` `range: 68-68`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.5`
invSupportabilityInfoValid Supportability (Current)	OctetString Constraints: `range: 32-32` `range: 40-40` `range: 52-52` `range: 68-68`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.6`
invCapa10MaxE1Rst Maximum Available E1/RST Connections for 10M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.7`
invCapa20MaxE1Rst Maximum Available E1/RST Connections for 20M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.8`
invCapa50MaxE1Rst Maximum Available E1/RST Connections for 50M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.9`
invCapa100MaxE1Rst Maximum Available E1/RST Connections for 100M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.10`
invCapa150MaxE1Rst Maximum Available E1/RST Connections for 150M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.11`
invCapa200MaxE1Rst Maximum Available E1/RST Connections for 200M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.12`
invCapa300MaxE1Rst Maximum Available E1/RST Connections for 300M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.13`
invCapa400MaxE1Rst Maximum Available E1/RST Connections for 400M Capacity.	OctetString Constraints: `range: 160-160` `range: 192-192`	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.14`
invSoftkeyEquipmentSerialNo Equipment Serial Number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.6.1.15`

invClk2mInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.7 · 1 row entry · 10 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invClk2mInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invClk2mInfoTable'

Equipment Inventory Information (IDU) - Main Board / Ctrl Card
(EXT CLK)

invClk2mInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.7.1

Indexes

invClk2mInfoIndex

Column	Syntax	OID
invClk2mInfoIndex Index of this table.	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.1`
invClk2mInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.2`
invClk2mCardName Name	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.3`
invClk2mCardCodeNo Code No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.4`
invClk2mCardSerialNo Serial No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.5`
invClk2mCardManufacturedDate Manufactured Date	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.6`
invClk2mFPGAName FPGA Name	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.7`
invClk2mFPGACodeNo FPGA Code No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.8`
invClk2mFPGAHardVersion FPGA Version.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.9`
invClk2mCardHardVersion Hardware Version.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.7.1.10`

invMacAddressInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.8 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invMacAddressInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invMacAddressInfoTable'

Equipment Inventory Information - Mac Address Information

invMacAddressInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.8.1

Indexes

invMacAddressInfoIfIndex

Column	Syntax	OID
invMacAddressInfoIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.7.8.1.1`
invMacAddressInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.8.1.2`
invMacAddress Mac Address which assigned to that port.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.501.7.8.1.3`

invModemParamInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.9 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invModemParamInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invModemParamInfoTable'

Equipment Inventory Information (IDU) - MODEM Parameter

invModemParamInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.9.1

Indexes

invModemParamInfoIfIndex

Column	Syntax	OID
invModemParamInfoIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.7.9.1.1`
invModemParamInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.9.1.2`
invModemParamVersion Parameter Information MIB format of invModemParamVersion is xx.yy.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.9.1.3`

invChassisInfoTable

table

.1.3.6.1.4.1.119.2.3.69.501.7.10 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk invChassisInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::invChassisInfoTable'

Equipment Inventory Information (IDU) - Chassis

invChassisInfoEntry row .1.3.6.1.4.1.119.2.3.69.501.7.10.1

Indexes

invChassisInfoIndex

Column	Syntax	OID
invChassisInfoIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.1`
invChassisInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.2`
invChassisName Name	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.3`
invChassisCodeNo Code No.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.4`
invChassisSerialNo Serial No. Note: For VR 2, this object cannot be modified, acting as read-only object.	OctetStringr/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.5`
invChassisManufacturedDate Manufactured Date Note: For VR 2, this object cannot be modified, acting as read-only object.	OctetStringr/w Constraints: `range: 1-7`	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.6`
invChassisFirmVersion Firmware Version	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.7`
invChassisHardVersion Hardware Version	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.501.7.10.1.8`

meteringTable

table

.1.3.6.1.4.1.119.2.3.69.501.8.1 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk meteringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::meteringTable'

MODEM TX / RX Metering Table.

meteringEntry row .1.3.6.1.4.1.119.2.3.69.501.8.1.1

Indexes

meteringIfIndex

Column Syntax OID

meteringIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.1

meteringNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.2

metSysTxPowerStatus

MODEM TX Power Status.

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.3

metSysTxPowerValue

MODEM TX Power

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.4

metSysRxLevelStatus

MODEM RX Power Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.5

metSysRxLevelValue

MODEM RX Power

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.6

metSysPSVoltageStatus

MODEM ODU Power Supply Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.7

metSysPSVoltageValue

MODEM ODU Power Supply

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.8

metSysTempODUStatus

MODEM ODU Temperature Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.9

metSysTempODUValue

MODEM ODU Temperature

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.10

metSysTempIDUStatus

IDU Temperature Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.11

metSysTempIDUValue

IDU Temperature

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.12

metSysBitErrorRateStatus

MODEM BER Status

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.13

metSysBitErrorRateValue

MODEM BER

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.1.1.14

meteringFanTable

table

.1.3.6.1.4.1.119.2.3.69.501.8.3 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk meteringFanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::meteringFanTable'

FAN Metering Table.

meteringFanEntry row .1.3.6.1.4.1.119.2.3.69.501.8.3.1

Indexes

meteringFanSlotIndex

Column Syntax OID

meteringFanSlotIndex

Index of this table.

Integer32

Constraints:
range: 8-8
range: 22-23

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.1

meteringFanNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.2

meteringFanSpeed1

FAN1 Rotation Speed

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.3

meteringFanSpeed1Status

FAN1 Rotation Speed Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.4

meteringFanSpeed2

FAN2 Rotation Speed

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.5

meteringFanSpeed2Status

FAN2 Rotation Speed Status

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.6

meteringFanSpeed3

FAN3 Rotation Speed

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.7

meteringFanSpeed3Status

FAN3 Rotation Speed Status

pmon15minDataModemIfIndex pmon15minDataModemMonitorName

Type Values:

0	invalid
1	valid

.1.3.6.1.4.1.119.2.3.69.501.8.3.1.8

pmon15minDataRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minDataRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minDataRadioTable'

PMON MODEM 15min RF Monitoring Table

pmon15minDataRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.9.1.1.1

Indexes

Column Syntax OID

pmon15minDataModemIfIndex

Index of this table.

pmon15minDataModemMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.1.1.1.1

Index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.1.1.1.2

pmon15minDataRadioNEAddress

reserved.

pmon15minDataModemStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.1.1.1.3

PMON MODEM 15min RF Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.1.1.1.4

pmon15minDataRfValue

PMON MODEM 15min RF Monitoring Value

pmon15minDataTmRsIfIndex pmon15minDataTmRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.1.1.1.5

pmon15minDataTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minDataTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minDataTmRsTable'

PMON STM-1 15min (Through Mode) RS Monitoring Table

pmon15minDataTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1

Indexes

Column Syntax OID

pmon15minDataTmRsIfIndex

Index of this table.

pmon15minDataTmRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1.1

index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1.2

pmon15minDataTmRsNEAddress

reserved.

pmon15minDataTmRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1.3

PMON STM-1 15min (Through Mode) RS Monitoring Status.

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1.4

pmon15minDataTmRsValue

PMON STM-1 15min (Through Mode) RS Monitoring Status

pmon15minDataTmDMRRsIfIndex pmon15minDataTmDMRRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.1.1.5

pmon15minDataTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minDataTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minDataTmDMRRsTable'

PMON STM-1 15min (Through Mode) DMR RS Monitoring Table

pmon15minDataTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1

Indexes

Column Syntax OID

pmon15minDataTmDMRRsIfIndex

Index of this table.

pmon15minDataTmDMRRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1.1

Index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1.2

pmon15minDataTmDMRRsNEAddress

reserved.

pmon15minDataTmDMRRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1.3

PMON STM-1 15min (Through Mode) DMR RS Monitoring Status

pmon15minDataTmDMRRsValue

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1.4

PMON STM-1 15min (Through Mode) DMR RS Monitoring Value

pmon15minDataChRsIfIndex pmon15minDataChRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.2.1.2.1.5

pmon15minDataChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minDataChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minDataChRsTable'

PMON STM-1 15min (Channelized Mode) RS Monitoring Table

pmon15minDataChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1

Indexes

Column Syntax OID

pmon15minDataChRsIfIndex

Index of this table.

pmon15minDataChRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1.1

Index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1.2

pmon15minDataChRsNEAddress

reserved.

pmon15minDataChRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1.3

PMON STM-1 15min (Channelized Mode) RS Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1.4

pmon15minDataChRsValue

PMON STM-1 15min (Channelized Mode) RS Monitoring Value

pmon15minDataChMsIfIndex pmon15minDataChMsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.1.1.5

pmon15minDataChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minDataChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minDataChMsTable'

PMON STM-1 15min (Channelized Mode) MS Monitoring Table.

pmon15minDataChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1

Indexes

Column Syntax OID

pmon15minDataChMsIfIndex

Index of this table.

pmon15minDataChMsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1.2

pmon15minDataChMsNEAddress

reserved.

pmon15minDataChMsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1.3

PMON STM-1 15min (Channelized Mode) MS Monitoring Status.

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1.4

pmon15minDataChMsValue

PMON STM-1 15min (Channelized Mode) MS Monitoring Value

pmon15minData16E1PdhIfIndex pmon15minData16E1PdhMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.2.2.2.1.5

pmon15minData16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon15minData16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon15minData16E1PdhTable'

PMON E1 15min Monitoring Table

pmon15minData16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1

Indexes

Column Syntax OID

pmon15minData16E1PdhIfIndex

Index of this table.

pmon15minData16E1PdhMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1.2

pmon15minData16E1PdhNEAddress

reserved.

pmon15minData16E1PdhStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1.3

PMON E1 15min Monitoring Status

pmon15minData16E1PdhValue

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1.4

PMON E1 15min Monitoring Value

pmon1dayDataModemIfIndex pmon1dayDataModemMonitorName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.9.2.3.1.1.5

pmon1dayDataRadioTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayDataRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayDataRadioTable'

PMON MODEM 1 day RF Monitoring Table

pmon1dayDataRadioEntry row .1.3.6.1.4.1.119.2.3.69.501.9.3.1.1

Indexes

Column Syntax OID

pmon1dayDataModemIfIndex

Index of this table.

pmon1dayDataModemMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.3.1.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.3.1.1.2

pmon1dayDataRadioNEAddress

reserved.

pmon1dayDataModemStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.3.1.1.3

PMON MODEM 1 day RF Monitoring Status.

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.3.1.1.4

pmon1dayDataRfValue

PMON MODEM 1 day RF Monitoring Value

pmon1dayDataTmRsIfIndex pmon1dayDataTmRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.3.1.1.5

pmon1dayDataTmRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayDataTmRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayDataTmRsTable'

PMON STM-1 1day (Through Mode) RS Monitoring Table

pmon1dayDataTmRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1

Indexes

Column Syntax OID

pmon1dayDataTmRsIfIndex

Index of this table.

pmon1dayDataTmRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1.2

pmon1dayDataTmRsNEAddress

reserved.

pmon1dayDataTmRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1.3

PMON STM-1 1day (Through Mode) RS Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1.4

pmon1dayDataTmRsValue

PMON STM-1 1day (Through Mode) RS Monitoring Value

pmon1dayDataTmDMRRsIfIndex pmon1dayDataTmDMRRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.1.1.5

pmon1dayDataTmDMRRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayDataTmDMRRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayDataTmDMRRsTable'

PMON STM-1 1day (Through Mode) DMR RS Monitoring Table

pmon1dayDataTmDMRRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1

Indexes

Column Syntax OID

pmon1dayDataTmDMRRsIfIndex

Index of this table.

pmon1dayDataTmDMRRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1.1

Index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1.2

pmon1dayDataTmDMRRsNEAddress

reserved.

pmon1dayDataTmDMRRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1.3

PMON STM-1 1day (Through Mode) DMR RS Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1.4

pmon1dayDataTmDMRRsValue

PMON STM-1 1day (Through Mode) DMR RS Monitoring Value

pmon1dayDataChRsIfIndex pmon1dayDataChRsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.4.1.2.1.5

pmon1dayDataChRsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayDataChRsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayDataChRsTable'

PMON STM-1 1day (Channelized Mode) RS Monitoring Table

pmon1dayDataChRsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1

Indexes

Column Syntax OID

pmon1dayDataChRsIfIndex

Index of this table.

pmon1dayDataChRsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1.2

pmon1dayDataChRsNEAddress

reserved.

pmon1dayDataChRsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1.3

PMON STM-1 1day (Channelized Mode) RS Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1.4

pmon1dayDataChRsValue

PMON STM-1 1day (Channelized Mode) RS Monitoring Value

pmon1dayDataChMsIfIndex pmon1dayDataChMsMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.1.1.5

pmon1dayDataChMsTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayDataChMsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayDataChMsTable'

PMON STM-1 1day (Channelized Mode) MS Monitoring Table

pmon1dayDataChMsEntry row .1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1

Indexes

Column Syntax OID

pmon1dayDataChMsIfIndex

Index of this table.

pmon1dayDataChMsMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1.1

Index of this table. The value represents the monitoring item

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1.2

pmon1dayDataChMsNEAddress

reserved.

pmon1dayDataChMsStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1.3

PMON STM-1 1day (Channelized Mode) MS Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1.4

pmon1dayDataChMsValue

PMON STM-1 1day (Channelized Mode) MS Monitoring Value

pmon1dayData16E1PdhIfIndex pmon1dayData16E1PdhMonitorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.501.9.4.2.2.1.5

pmon1dayData16E1PdhTable

table

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmon1dayData16E1PdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmon1dayData16E1PdhTable'

PMON E1 1day Monitoring Table

pmon1dayData16E1PdhEntry row .1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1

Indexes

Column Syntax OID

pmon1dayData16E1PdhIfIndex

Index of this table.

pmon1dayData16E1PdhMonitorName

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1.1

Index of this table. The value represents the monitoring item.

Enumeration

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1.2

pmon1dayData16E1PdhNEAddress

reserved.

pmon1dayData16E1PdhStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1.3

PMON E1 1day Monitoring Status

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1.4

pmon1dayData16E1PdhValue

PMON E1 1day Monitoring Value

pmonTxRxLev15minCurrentDataIfIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.9.4.3.1.1.5

pmonTxRxLev15minCurrentDataTable

table

.1.3.6.1.4.1.119.2.3.69.501.10.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmonTxRxLev15minCurrentDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmonTxRxLev15minCurrentDataTable'

PMON ODU 15min Tx/RX Level Monitoring Table

pmonTxRxLev15minCurrentDataEntry row .1.3.6.1.4.1.119.2.3.69.501.10.1.1

Indexes

Column Syntax OID

pmonTxRxLev15minCurrentDataIfIndex

Index of this table.

pmonTxRxLev15minCurrentDataNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.10.1.1.1

reserved.

pmonTxRxLev15minCurrentDataStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.10.1.1.2

PMON ODU 15min RX Level Status

pmonTxRxLev15minRxLevelMaxCurrentData

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.10.1.1.3

PMON ODU 15min RX Level (MAX)

pmonTxRxLev15minRxLevelMinCurrentData

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.10.1.1.4

PMON ODU 15min RX Level (MIN)

pmonTxRxLev1dayCurrentDataIfIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.10.1.1.5

pmonTxRxLev1dayCurrentDataTable

table

.1.3.6.1.4.1.119.2.3.69.501.10.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk pmonTxRxLev1dayCurrentDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::pmonTxRxLev1dayCurrentDataTable'

PMON ODU 1day Tx/RX Level Monitoring Table

pmonTxRxLev1dayCurrentDataEntry row .1.3.6.1.4.1.119.2.3.69.501.10.2.1

Indexes

Column Syntax OID

pmonTxRxLev1dayCurrentDataIfIndex

Index of this table.

pmonTxRxLev1dayCurrentDataNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.10.2.1.1

reserved.

pmonTxRxLev1dayCurrentDataStatusInfo

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.10.2.1.2

PMON ODU 1day RX Level Status

pmonTxRxLev1dayRxLevelMaxCurrentData

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.10.2.1.3

PMON ODU 1day RX Level (MAX)

pmonTxRxLev1dayRxLevelMinCurrentData

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.10.2.1.4

PMON ODU 1day RX Level (MIN)

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.501.10.2.1.5

rmon15minPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1 · 1 row entry · 84 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk rmon15minPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::rmon15minPortTable'

RMON 15min Port Monitoring Table.

rmon15minPortEntry row .1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1

Indexes

rmon15minIfIndex

Column	Syntax	OID
rmon15minIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.1`
rmon15minNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.2`
rmon15minHCRxEthStatsOctets RMON 15min RX Octs	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.3`
rmon15minHCRxEthStatsOctetsStatusInfo RMON 15min RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interv…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.4`
rmon15minHCTxEthStatsOctets RMON 15min TX Octs	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.5`
rmon15minHCTxEthStatsOctetsStatusInfo RMON 15min TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interv…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.6`
rmon15minRxEthStatsPkts RMON 15min RX Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.7`
rmon15minRxEthStatsPktsStatusInfo RMON 15min RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interv…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.8`
rmon15minTxEthStatsPkts RMON 15min TX Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.9`
rmon15minTxEthStatsPktsStatusInfo RMON 15min TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interv…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.10`
rmon15minRxEthStatsDropEvents RMON 15min RX Drop Events	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.11`
rmon15minRxEthStatsDropEventsStatusInfo RMON 15min RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.12`
rmon15minRxEthStatsUndersizePkts RMON 15min RX Undersize Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.13`
rmon15minRxEthStatsUndersizePktsStatusInfo RMON 15min RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.14`
rmon15minRxEthStatsFragments RMON 15min RX Fragments	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.15`
rmon15minRxEthStatsFragmentsStatusInfo RMON 15min RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current i…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.16`
rmon15minRxEthStatsPkts64Octets RMON 15min RX 64 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.17`
rmon15minRxEthStatsPkts64OctetsStatusInfo RMON 15min RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current int…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.18`
rmon15minTxEthStatsPkts64Octets RMON 15min TX 64 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.19`
rmon15minTxEthStatsPkts64OctetsStatusInfo RMON 15min TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current int…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.20`
rmon15minRxEthStatsPkts65to127Octets RMON 15min RX 65 to 127 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.21`
rmon15minRxEthStatsPkts65to127OctetsStatusInfo RMON 15min RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.22`
rmon15minTxEthStatsPkts65to127Octets RMON 15min TX 65 to 127 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.23`
rmon15minTxEthStatsPkts65to127OctetsStatusInfo RMON 15min TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.24`
rmon15minRxEthStatsPkts128to255Octets RMON 15min RX 128 to 255 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.25`
rmon15minRxEthStatsPkts128to255OctetsStatusInfo RMON 15min RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.26`
rmon15minTxEthStatsPkts128to255Octets RMON 15min TX 128 to 255 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.27`
rmon15minTxEthStatsPkts128to255OctetsStatusInfo RMON 15min TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.28`
rmon15minRxEthStatsPkts256to511Octets RMON 15min RX 256 to 511 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.29`
rmon15minRxEthStatsPkts256to511OctetsStatusInfo RMON 15min RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.30`
rmon15minTxEthStatsPkts256to511Octets RMON 15min TX 256 to 511 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.31`
rmon15minTxEthStatsPkts256to511OctetsStatusInfo RMON 15min TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.32`
rmon15minRxEthStatsPkts512to1023Octets RMON 15min RX 512 to 1023 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.33`
rmon15minRxEthStatsPkts512to1023OctetsStatusInfo RMON 15min RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cu…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.34`
rmon15minTxEthStatsPkts512to1023Octets RMON 15min TX 512 to 1023 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.35`
rmon15minTxEthStatsPkts512to1023OctetsStatusInfo RMON 15min TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cu…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.36`
rmon15minRxEthStatsPkts1024to1518Octets RMON 15min RX 1024 to 1518 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.37`
rmon15minRxEthStatsPkts1024to1518OctetsStatusInfo RMON 15min RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the c…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.38`
rmon15minTxEthStatsPkts1024to1518Octets RMON 15min TX 1024 to 1518 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.39`
rmon15minTxEthStatsPkts1024to1518OctetsStatusInfo RMON 15min TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the c…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.40`
rmon15minRxEthStatsCRCAlignErrors RMON 15min RX CRC Alignment Errors	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.41`
rmon15minRxEthStatsCRCAlignErrorsStatusInfo RMON 15min RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on th…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.42`
rmon15minRxEthStatsOversizePkts RMON 15min RX Oversize Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.43`
rmon15minRxEthStatsOversizePktsStatusInfo RMON 15min RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.44`
rmon15minRxEthStatsJabbers RMON 15min RX Jabbers	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.45`
rmon15minRxEthStatsJabbersStatusInfo RMON 15min RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current int…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.46`
rmon15minRxEthStatsMulticastPkts RMON 15min RX Multicast Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.47`
rmon15minRxEthStatsMulticastPktsStatusInfo RMON 15min RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.48`
rmon15minTxEthStatsMulticastPkts RMON 15min TX Multicast Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.49`
rmon15minTxEthStatsMulticastPktsStatusInfo RMON 15min TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.50`
rmon15minRxEthStatsBroadcastPkts RMON 15min RX Broadcast Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.51`
rmon15minRxEthStatsBroadcastPktsStatusInfo RMON 15min RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.52`
rmon15minTxEthStatsBroadcastPkts RMON 15min TX Broadcast Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.53`
rmon15minTxEthStatsBroadcastPktsStatusInfo RMON 15min TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.54`
rmon15minTxEthStatsCollisions RMON 15min TX Collisions	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.55`
rmon15minTxEthStatsCollisionsStatusInfo RMON 15min TX Collisions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current …	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.56`
rmon15minHCRxUnknownTPID RMON 15min Unknown TPID	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.57`
rmon15minHCRxUnknownTPIDStatusInfo RMON 15min Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current i…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.58`
rmon15minHCRxUnknownVID RMON 15min Unknown VID	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.59`
rmon15minHCRxUnknownVIDStatusInfo RMON 15min Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current in…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.60`
rmon15minHCRxMAClimit RMON 15min RX MAC Limit	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.61`
rmon15minHCRxMAClimitStatusInfo RMON 15min RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current i…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.62`
rmon15minHCRxFilterDiscard RMON 15min RX Filter Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.63`
rmon15minHCRxFilterDiscardStatusInfo RMON 15min RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.64`
rmon15minHCRxQoSDiscard RMON 15min RX QoS Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.65`
rmon15minHCRxQoSDiscardStatusInfo RMON 15min RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.66`
rmon15minHCTxQueue0Discard RMON 15min TX Queue0 Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.67`
rmon15minHCTxQueue0DiscardStatusInfo RMON 15min TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.68`
rmon15minHCTxQueue1Discard RMON 15min TX Queue1 Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.69`
rmon15minHCTxQueue1DiscardStatusInfo RMON 15min TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.70`
rmon15minHCTxQueue2Discard RMON 15min TX Queue2 Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.71`
rmon15minHCTxQueue2DiscardStatusInfo RMON 15min TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.72`
rmon15minHCTxQueue3Discard RMON 15min TX Queue3 Discard	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.73`
rmon15minHCTxQueue3DiscardStatusInfo RMON 15min TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.74`
rmon15minHCTxQueue4Discard RMON 15min TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.75`
rmon15minHCTxQueue4DiscardStatusInfo RMON 15min TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.76`
rmon15minHCTxQueue5Discard RMON 15min TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.77`
rmon15minHCTxQueue5DiscardStatusInfo RMON 15min TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.78`
rmon15minHCTxQueue6Discard RMON 15min TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.79`
rmon15minHCTxQueue6DiscardStatusInfo RMON 15min TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.80`
rmon15minHCTxQueue7Discard RMON 15min TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.81`
rmon15minHCTxQueue7DiscardStatusInfo RMON 15min TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.82`
rmon15minTxEthStatsOversizePkts RMON 15min TX Oversize Pkts.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.83`
rmon15minTxEthStatsOversizePktsStatusInfo RMON 15min TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.1.1.1.84`

rmon15minPort2Table

table

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2 · 1 row entry · 84 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk rmon15minPort2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::rmon15minPort2Table'

RMON 15min Port Monitoring Table.

rmon15minPort2Entry row .1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1

Indexes

rmon15minPort2IfIndex

Column Syntax OID

rmon15minPort2IfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.1

rmon15minPort2NEAddress

reserved.

rmon15minHCRxEthStatsOctets2

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.2

RMON 15min RX Octs

rmon15minHCRxEthStatsOctets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.3

RMON 15min RX Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interv…

rmon15minHCTxEthStatsOctets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.4

RMON 15min TX Octs

rmon15minHCTxEthStatsOctets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.5

RMON 15min TX Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interv…

rmon15minHCRxEthStatsPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.6

RMON 15min RX Pkts

rmon15minHCRxEthStatsPkts2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.7

RMON 15min RX Pkts Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interv…

rmon15minHCTxEthStatsPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.8

RMON 15min TX Pkts

rmon15minHCTxEthStatsPkts2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.9

RMON 15min TX Pkts Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interv…

rmon15minRxEthStatsDropEvents2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.10

RMON 15min RX Drop Events

rmon15minRxEthStatsDropEvents2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.11

RMON 15min RX Drop Events Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current…

rmon15minRxEthStatsUndersizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.12

RMON 15min RX Undersize Pkts

rmon15minRxEthStatsUndersizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.13

RMON 15min RX Undersize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minRxEthStatsFragments2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.14

RMON 15min RX Fragments

rmon15minRxEthStatsFragments2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.15

RMON 15min RX Fragments Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current i…

rmon15minHCRxEthStatsPkts64Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.16

RMON 15min RX 64 Octs

rmon15minHCRxEthStatsPkts64Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.17

RMON 15min RX 64 Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current int…

rmon15minHCTxEthStatsPkts64Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.18

RMON 15min TX 64 Octs

rmon15minHCTxEthStatsPkts64Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.19

RMON 15min TX 64 Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current int…

rmon15minHCRxEthStatsPkts65to127Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.20

RMON 15min RX 65 to 127 Octs

rmon15minHCRxEthStatsPkts65to127Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.21

RMON 15min RX 65 to 127 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxEthStatsPkts65to127Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.22

RMON 15min TX 65 to 127 Octs

rmon15minHCTxEthStatsPkts65to127Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.23

RMON 15min TX 65 to 127 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCRxEthStatsPkts128to255Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.24

RMON 15min RX 128 to 255 Octs

rmon15minHCRxEthStatsPkts128to255Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.25

RMON 15min RX 128 to 255 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon15minHCTxEthStatsPkts128to255Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.26

RMON 15min TX 128 to 255 Octs

rmon15minHCTxEthStatsPkts128to255Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.27

RMON 15min TX 128 to 255 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon15minHCRxEthStatsPkts256to511Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.28

RMON 15min RX 256 to 511 Octs

rmon15minHCRxEthStatsPkts256to511Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.29

RMON 15min RX 256 to 511 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon15minHCTxEthStatsPkts256to511Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.30

RMON 15min TX 256 to 511 Octs

rmon15minHCTxEthStatsPkts256to511Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.31

RMON 15min TX 256 to 511 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon15minHCRxEthStatsPkts512to1023Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.32

RMON 15min RX 512 to 1023 Octs

rmon15minHCRxEthStatsPkts512to1023Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.33

RMON 15min RX 512 to 1023 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cu…

rmon15minHCTxEthStatsPkts512to1023Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.34

RMON 15min TX 512 to 1023 Octs

rmon15minHCTxEthStatsPkts512to1023Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.35

RMON 15min TX 512 to 1023 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cu…

rmon15minHCRxEthStatsPkts1024to1518Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.36

RMON 15min RX 1024 to 1518 Octs

rmon15minHCRxEthStatsPkts1024to1518Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.37

RMON 15min RX 1024 to 1518 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the c…

rmon15minHCTxEthStatsPkts1024to1518Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.38

RMON 15min TX 1024 to 1518 Octs

rmon15minHCTxEthStatsPkts1024to1518Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.39

RMON 15min TX 1024 to 1518 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the c…

rmon15minRxEthStatsCRCAlignErrors2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.40

RMON 15min RX CRC Alignment Errors

rmon15minRxEthStatsCRCAlignErrors2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.41

RMON 15min RX CRC Alignment Errors Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on th…

rmon15minRxEthStatsOversizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.42

RMON 15min RX Oversize Pkts

rmon15minRxEthStatsOversizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.43

RMON 15min RX Oversize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon15minRxEthStatsJabbers2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.44

RMON 15min RX Jabbers

rmon15minRxEthStatsJabbers2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.45

RMON 15min RX Jabbers Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current int…

rmon15minRxEthStatsMulticastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.46

RMON 15min RX Multicast Pkts

rmon15minRxEthStatsMulticastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.47

RMON 15min RX Multicast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minTxEthStatsMulticastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.48

RMON 15min TX Multicast Pkts

rmon15minTxEthStatsMulticastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.49

RMON 15min TX Multicast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minRxEthStatsBroadcastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.50

RMON 15min RX Broadcast Pkts

rmon15minRxEthStatsBroadcastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.51

RMON 15min RX Broadcast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minTxEthStatsBroadcastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.52

RMON 15min TX Broadcast Pkts

rmon15minTxEthStatsBroadcastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.53

RMON 15min TX Broadcast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minTxEthStatsCollisions2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.54

RMON 15min TX Collisions

rmon15minTxEthStatsCollisions2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.55

RMON 15min TX Collisions Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current …

rmon15minHCRxUnknownTPID2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.56

RMON 15min Unknown TPID

rmon15minHCRxUnknownTPID2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.57

RMON 15min Unknown TPID Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current i…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.58

rmon15minHCRxUnknownVID2

RMON 15min Unknown VID

rmon15minHCRxUnknownVID2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.59

RMON 15min Unknown VID Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current in…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.60

rmon15minHCRxMAClimit2

RMON 15min RX MAC Limit

rmon15minHCRxMAClimit2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.61

RMON 15min RX MAC Limit Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current i…

rmon15minHCRxFilterDiscard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.62

RMON 15min RX Filter Discard

rmon15minHCRxFilterDiscard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.63

RMON 15min RX Filter Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.64

rmon15minHCRxQoSDiscard2

RMON 15min RX QoS Discard

rmon15minHCRxQoSDiscard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.65

RMON 15min RX QoS Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current…

rmon15minHCTxQueue0Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.66

RMON 15min TX Queue0 Discard

rmon15minHCTxQueue0Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.67

RMON 15min TX Queue0 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue1Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.68

RMON 15min TX Queue1 Discard

rmon15minHCTxQueue1Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.69

RMON 15min TX Queue1 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue2Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.70

RMON 15min TX Queue2 Discard

rmon15minHCTxQueue2Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.71

RMON 15min TX Queue2 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue3Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.72

RMON 15min TX Queue3 Discard

rmon15minHCTxQueue3Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.73

RMON 15min TX Queue3 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue4Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.74

RMON 15min TX Queue4 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon15minHCTxQueue4Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.75

RMON 15min TX Queue4 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue5Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.76

RMON 15min TX Queue5 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon15minHCTxQueue5Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.77

RMON 15min TX Queue5 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue6Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.78

RMON 15min TX Queue6 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon15minHCTxQueue6Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.79

RMON 15min TX Queue6 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minHCTxQueue7Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.80

RMON 15min TX Queue7 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon15minHCTxQueue7Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.81

RMON 15min TX Queue7 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon15minTxEthStatsOversizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.82

RMON 15min TX Oversize Pkts.

rmon15minTxEthStatsOversizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.83

RMON 15min TX Oversize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.1.2.1.84

rmon1dayPortTable

table

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1 · 1 row entry · 84 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk rmon1dayPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::rmon1dayPortTable'

RMON 1day Port Monitoring Table.

rmon1dayPortEntry row .1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1

Indexes

rmon1dayIfIndex

Column	Syntax	OID
rmon1dayIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.1`
rmon1dayNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.2`
rmon1dayHCRxEthStatsOctets RMON 1day RX Octs	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.3`
rmon1dayHCRxEthStatsOctetsStatusInfo RMON 1day RX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interva…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.4`
rmon1dayHCTxEthStatsOctets RMON 1day TX Octs	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.5`
rmon1dayHCTxEthStatsOctetsStatusInfo RMON 1day TX Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interva…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.6`
rmon1dayRxEthStatsPkts RMON 1day RX Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.7`
rmon1dayRxEthStatsPktsStatusInfo RMON 1day RX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interva…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.8`
rmon1dayTxEthStatsPkts RMON 1day TX Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.9`
rmon1dayTxEthStatsPktsStatusInfo RMON 1day TX Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current interva…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.10`
rmon1dayRxEthStatsDropEvents RMON 1day RX Drop Events	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.11`
rmon1dayRxEthStatsDropEventsStatusInfo RMON 1day RX Drop Events Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current …	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.12`
rmon1dayRxEthStatsUndersizePkts RMON 1day RX Undersize Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.13`
rmon1dayRxEthStatsUndersizePktsStatusInfo RMON 1day RX Undersize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.14`
rmon1dayRxEthStatsFragments RMON 1day RX Fragments	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.15`
rmon1dayRxEthStatsFragmentsStatusInfo RMON 1day RX Fragments Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current in…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.16`
rmon1dayRxEthStatsPkts64Octets RMON 1day RX 64 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.17`
rmon1dayRxEthStatsPkts64OctetsStatusInfo RMON 1day RX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current inte…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.18`
rmon1dayTxEthStatsPkts64Octets RMON 1day TX 64 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.19`
rmon1dayTxEthStatsPkts64OctetsStatusInfo RMON 1day TX 64 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current inte…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.20`
rmon1dayRxEthStatsPkts65to127Octets RMON 1day RX 65 to 127 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.21`
rmon1dayRxEthStatsPkts65to127OctetsStatusInfo RMON 1day RX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.22`
rmon1dayTxEthStatsPkts65to127Octets RMON 1day TX 65 to 127 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.23`
rmon1dayTxEthStatsPkts65to127OctetsStatusInfo RMON 1day TX 65 to 127 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.24`
rmon1dayRxEthStatsPkts128to255Octets RMON 1day RX 128 to 255 Octs.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.25`
rmon1dayRxEthStatsPkts128to255OctetsStatusInfo RMON 1day RX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.26`
rmon1dayTxEthStatsPkts128to255Octets RMON 1day TX 128 to 255 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.27`
rmon1dayTxEthStatsPkts128to255OctetsStatusInfo RMON 1day TX 128 to 255 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.28`
rmon1dayRxEthStatsPkts256to511Octets RMON 1day RX 256 to 511 Octs.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.29`
rmon1dayRxEthStatsPkts256to511OctetsStatusInfo RMON 1day RX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.30`
rmon1dayTxEthStatsPkts256to511Octets RMON 1day TX 256 to 511 Octs.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.31`
rmon1dayTxEthStatsPkts256to511OctetsStatusInfo RMON 1day TX 256 to 511 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curr…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.32`
rmon1dayRxEthStatsPkts512to1023Octets RMON 1day RX 512 to 1023 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.33`
rmon1dayRxEthStatsPkts512to1023OctetsStatusInfo RMON 1day RX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.34`
rmon1dayTxEthStatsPkts512to1023Octets RMON 1day TX 512 to 1023 Octs	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.35`
rmon1dayTxEthStatsPkts512to1023OctetsStatusInfo RMON 1day TX 512 to 1023 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cur…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.36`
rmon1dayRxEthStatsPkts1024to1518Octets RMON 1day RX 1024 to 1518 Octs.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.37`
rmon1dayRxEthStatsPkts1024to1518OctetsStatusInfo RMON 1day RX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cu…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.38`
rmon1dayTxEthStatsPkts1024to1518Octets RMON 1day TX 1024 to 1518 Octs.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.39`
rmon1dayTxEthStatsPkts1024to1518OctetsStatusInfo RMON 1day TX 1024 to 1518 Octs Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the cu…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.40`
rmon1dayRxEthStatsCRCAlignErrors RMON 1day RX CRC Alignment Errors	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.41`
rmon1dayRxEthStatsCRCAlignErrorsStatusInfo RMON 1day RX CRC Alignment Errors Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.42`
rmon1dayRxEthStatsOversizePkts RMON 1day RX Oversize Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.43`
rmon1dayRxEthStatsOversizePktsStatusInfo RMON 1day RX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curren…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.44`
rmon1dayRxEthStatsJabbers RMON 1day RX Jabbers	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.45`
rmon1dayRxEthStatsJabbersStatusInfo RMON 1day RX Jabbers Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current inte…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.46`
rmon1dayRxEthStatsMulticastPkts RMON 1day RX Multicast Pkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.47`
rmon1dayRxEthStatsMulticastPktsStatusInfo RMON 1day RX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.48`
rmon1dayTxEthStatsMulticastPkts RMON 1day TX Multicast Pkts.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.49`
rmon1dayTxEthStatsMulticastPktsStatusInfo RMON 1day TX Multicast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.50`
rmon1dayRxEthStatsBroadcastPkts RMON 1day RX Broadcast Pkts.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.51`
rmon1dayRxEthStatsBroadcastPktsStatusInfo RMON 1day RX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.52`
rmon1dayTxEthStatsBroadcastPkts RMON 1day TX Broadcast Pkts.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.53`
rmon1dayTxEthStatsBroadcastPktsStatusInfo RMON 1day TX Broadcast Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.54`
rmon1dayTxEthStatsCollisions RMON 1day TX Collisions.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.55`
rmon1dayTxEthStatsCollisionsStatusInfo RMON 1day TX Collistions Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current …	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.56`
rmon1dayHCRxUnknownTPID RMON 1day RX Unknown TPID.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.57`
rmon1dayHCRxUnknownTPIDStatusInfo RMON 1day RX Unknown TPID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.58`
rmon1dayHCRxUnknownVID RMON 1day RX Unknown VID.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.59`
rmon1dayHCRxUnknownVIDStatusInfo RMON 1day RX Unknown VID Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current …	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.60`
rmon1dayHCRxMAClimit RMON 1day RX MAC Limit.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.61`
rmon1dayHCRxMAClimitStatusInfo RMON 1day RX MAC Limit Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current in…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.62`
rmon1dayHCRxFilterDiscard RMON 1day RX Filter Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.63`
rmon1dayHCRxFilterDiscardStatusInfo RMON 1day RX Filter Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.64`
rmon1dayHCRxQoSDiscard RMON 1day RX QoS Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.65`
rmon1dayHCRxQoSDiscardStatusInfo RMON 1day RX QoS Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the current …	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.66`
rmon1dayHCTxQueue0Discard RMON 1day TX Queue0 Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.67`
rmon1dayHCTxQueue0DiscardStatusInfo RMON 1day TX Queue0 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.68`
rmon1dayHCTxQueue1Discard RMON 1day TX Queue1 Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.69`
rmon1dayHCTxQueue1DiscardStatusInfo RMON 1day TX Queue1 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.70`
rmon1dayHCTxQueue2Discard RMON 1day TX Queue2 Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.71`
rmon1dayHCTxQueue2DiscardStatusInfo RMON 1day TX Queue2 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.72`
rmon1dayHCTxQueue3Discard RMON 1day TX Queue3 Discard.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.73`
rmon1dayHCTxQueue3DiscardStatusInfo RMON 1day TX Queue3 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.74`
rmon1dayHCTxQueue4Discard RMON 1day TX Queue4 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.75`
rmon1dayHCTxQueue4DiscardStatusInfo RMON 1day TX Queue4 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.76`
rmon1dayHCTxQueue5Discard RMON 1day TX Queue5 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.77`
rmon1dayHCTxQueue5DiscardStatusInfo RMON 1day TX Queue5 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.78`
rmon1dayHCTxQueue6Discard RMON 1day TX Queue6 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.79`
rmon1dayHCTxQueue6DiscardStatusInfo RMON 1day TX Queue6 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.80`
rmon1dayHCTxQueue7Discard RMON 1day TX Queue7 Discard. If the equipment is running on 4 class QoS mode. The value of this object is always 0.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.81`
rmon1dayHCTxQueue7DiscardStatusInfo RMON 1day TX Queue7 Discard Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curre…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.82`
rmon1dayTxEthStatsOversizePkts RMON 1day TX Oversize Pkts.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.83`
rmon1dayTxEthStatsOversizePktsStatusInfo RMON 1day TX Oversize Pkts Status. 'invalid' means the corresponding monitoring value is not reliable because of the alarm or other reasons. 'maintenance' means that some maintenance functions are executed on the curren…	Enumeration	`.1.3.6.1.4.1.119.2.3.69.501.11.1.2.1.1.84`

rmon1dayPort2Table

table

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2 · 1 row entry · 84 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk rmon1dayPort2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-COMMON-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-COMMON-MIB::rmon1dayPort2Table'

RMON 1day Port Monitoring Table.

rmon1dayPort2Entry row .1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1

Indexes

rmon1dayPort2IfIndex

Column Syntax OID

rmon1dayPort2IfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.1

rmon1dayPort2NEAddress

reserved.

rmon1dayHCRxEthStatsOctets2

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.2

RMON 1day RX Octs

rmon1dayHCRxEthStatsOctets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.3

RMON 1day RX Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interva…

rmon1dayHCTxEthStatsOctets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.4

RMON 1day TX Octs

rmon1dayHCTxEthStatsOctets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.5

RMON 1day TX Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interva…

rmon1dayHCRxEthStatsPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.6

RMON 1day RX Pkts

rmon1dayHCRxEthStatsPkts2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.7

RMON 1day RX Pkts Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interva…

rmon1dayHCTxEthStatsPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.8

RMON 1day TX Pkts

rmon1dayHCTxEthStatsPkts2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.9

RMON 1day TX Pkts Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current interva…

rmon1dayRxEthStatsDropEvents2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.10

RMON 1day RX Drop Events

rmon1dayRxEthStatsDropEvents2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.11

RMON 1day RX Drop Events Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current …

rmon1dayRxEthStatsUndersizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.12

RMON 1day RX Undersize Pkts

rmon1dayRxEthStatsUndersizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.13

RMON 1day RX Undersize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayRxEthStatsFragments2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.14

RMON 1day RX Fragments

rmon1dayRxEthStatsFragments2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.15

RMON 1day RX Fragments Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current in…

rmon1dayHCRxEthStatsPkts64Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.16

RMON 1day RX 64 Octs

rmon1dayHCRxEthStatsPkts64Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.17

RMON 1day RX 64 Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current inte…

rmon1dayHCTxEthStatsPkts64Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.18

RMON 1day TX 64 Octs

rmon1dayHCTxEthStatsPkts64Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.19

RMON 1day TX 64 Octs Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current inte…

rmon1dayHCRxEthStatsPkts65to127Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.20

RMON 1day RX 65 to 127 Octs

rmon1dayHCRxEthStatsPkts65to127Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.21

RMON 1day RX 65 to 127 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxEthStatsPkts65to127Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.22

RMON 1day TX 65 to 127 Octs

rmon1dayHCTxEthStatsPkts65to127Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.23

RMON 1day TX 65 to 127 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCRxEthStatsPkts128to255Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.24

RMON 1day RX 128 to 255 Octs.

rmon1dayHCRxEthStatsPkts128to255Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.25

RMON 1day RX 128 to 255 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon1dayHCTxEthStatsPkts128to255Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.26

RMON 1day TX 128 to 255 Octs

rmon1dayHCTxEthStatsPkts128to255Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.27

RMON 1day TX 128 to 255 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon1dayHCRxEthStatsPkts256to511Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.28

RMON 1day RX 256 to 511 Octs.

rmon1dayHCRxEthStatsPkts256to511Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.29

RMON 1day RX 256 to 511 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon1dayHCTxEthStatsPkts256to511Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.30

RMON 1day TX 256 to 511 Octs.

rmon1dayHCTxEthStatsPkts256to511Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.31

RMON 1day TX 256 to 511 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curr…

rmon1dayHCRxEthStatsPkts512to1023Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.32

RMON 1day RX 512 to 1023 Octs

rmon1dayHCRxEthStatsPkts512to1023Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.33

RMON 1day RX 512 to 1023 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon1dayHCTxEthStatsPkts512to1023Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.34

RMON 1day TX 512 to 1023 Octs

rmon1dayHCTxEthStatsPkts512to1023Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.35

RMON 1day TX 512 to 1023 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cur…

rmon1dayHCRxEthStatsPkts1024to1518Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.36

RMON 1day RX 1024 to 1518 Octs.

rmon1dayHCRxEthStatsPkts1024to1518Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.37

RMON 1day RX 1024 to 1518 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cu…

rmon1dayHCTxEthStatsPkts1024to1518Octets2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.38

RMON 1day TX 1024 to 1518 Octs.

rmon1dayHCTxEthStatsPkts1024to1518Octets2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.39

RMON 1day TX 1024 to 1518 Octs Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the cu…

rmon1dayRxEthStatsCRCAlignErrors2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.40

RMON 1day RX CRC Alignment Errors

rmon1dayRxEthStatsCRCAlignErrors2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.41

RMON 1day RX CRC Alignment Errors Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the…

rmon1dayRxEthStatsOversizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.42

RMON 1day RX Oversize Pkts

rmon1dayRxEthStatsOversizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.43

RMON 1day RX Oversize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curren…

rmon1dayRxEthStatsJabbers2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.44

RMON 1day RX Jabbers

rmon1dayRxEthStatsJabbers2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.45

RMON 1day RX Jabbers Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current inte…

rmon1dayRxEthStatsMulticastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.46

RMON 1day RX Multicast Pkts

rmon1dayRxEthStatsMulticastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.47

RMON 1day RX Multicast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayTxEthStatsMulticastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.48

RMON 1day TX Multicast Pkts.

rmon1dayTxEthStatsMulticastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.49

RMON 1day TX Multicast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayRxEthStatsBroadcastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.50

RMON 1day RX Broadcast Pkts.

rmon1dayRxEthStatsBroadcastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.51

RMON 1day RX Broadcast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayTxEthStatsBroadcastPkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.52

RMON 1day TX Broadcast Pkts.

rmon1dayTxEthStatsBroadcastPkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.53

RMON 1day TX Broadcast Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayTxEthStatsCollisions2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.54

RMON 1day TX Collisions.

rmon1dayTxEthStatsCollisions2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.55

RMON 1day TX Collistions Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current …

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.56

rmon1dayHCRxUnknownTPID2

RMON 1day RX Unknown TPID.

rmon1dayHCRxUnknownTPID2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.57

RMON 1day RX Unknown TPID Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.58

rmon1dayHCRxUnknownVID2

RMON 1day RX Unknown VID.

rmon1dayHCRxUnknownVID2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.59

RMON 1day RX Unknown VID Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current …

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.60

rmon1dayHCRxMAClimit2

RMON 1day RX MAC Limit.

rmon1dayHCRxMAClimit2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.61

RMON 1day RX MAC Limit Status. 'invalid' means the corresponding
monitoring value is not reliable because of the alarm or other
reasons. 'maintenance' means that some maintenance functions are
executed on the current in…

rmon1dayHCRxFilterDiscard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.62

RMON 1day RX Filter Discard.

rmon1dayHCRxFilterDiscard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.63

RMON 1day RX Filter Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.64

rmon1dayHCRxQoSDiscard2

RMON 1day RX QoS Discard.

rmon1dayHCRxQoSDiscard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.65

RMON 1day RX QoS Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the current …

rmon1dayHCTxQueue0Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.66

RMON 1day TX Queue0 Discard.

rmon1dayHCTxQueue0Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.67

RMON 1day TX Queue0 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue1Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.68

RMON 1day TX Queue1 Discard.

rmon1dayHCTxQueue1Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.69

RMON 1day TX Queue1 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue2Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.70

RMON 1day TX Queue2 Discard.

rmon1dayHCTxQueue2Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.71

RMON 1day TX Queue2 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue3Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.72

RMON 1day TX Queue3 Discard.

rmon1dayHCTxQueue3Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.73

RMON 1day TX Queue3 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue4Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.74

RMON 1day TX Queue4 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon1dayHCTxQueue4Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.75

RMON 1day TX Queue4 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue5Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.76

RMON 1day TX Queue5 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon1dayHCTxQueue5Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.77

RMON 1day TX Queue5 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue6Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.78

RMON 1day TX Queue6 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon1dayHCTxQueue6Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.79

RMON 1day TX Queue6 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayHCTxQueue7Discard2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.80

RMON 1day TX Queue7 Discard. If the equipment is running on 4
class QoS mode. The value of this object is always 0.

rmon1dayHCTxQueue7Discard2Status

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.81

RMON 1day TX Queue7 Discard Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curre…

rmon1dayTxEthStatsOversizePkts2

Type Values:

0	invalid
1	validNoMaint
2	validMaint
3	invalidNoMaint
4	invalidMaint

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.82

RMON 1day TX Oversize Pkts.

rmon1dayTxEthStatsOversizePkts2Status

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.119.2.3.69.501.11.1.2.2.1.83

RMON 1day TX Oversize Pkts Status. 'invalid' means the
corresponding monitoring value is not reliable because of the
alarm or other reasons. 'maintenance' means that some maintenance
functions are executed on the curren…