IP-MAC-BIND-MIB Table View

The table specifies the IP-MAC binding function of a specified port.

swIpMacBindingPortEntry row .1.3.6.1.4.1.171.12.23.3.2.1

A list containing information about the IP-MAC binding function of a port.

Indexes

swIpMacBindingPortIndex

Column	Syntax	OID
swIpMacBindingPortIndex This object indicates the module's port number. (1..Max port number in the module).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.23.3.2.1.1
swIpMacBindingPortState This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the…	Enumerationr/w Enumerated Values: 1 other 2 enable-strict 3 disable 4 enable-loose	.1.3.6.1.4.1.171.12.23.3.2.1.2
swIpMacBindingPortZeroIPState Specifies whether to allow ARP packets with the SIP address 0.0.0.0, regardless of whether the IP address 0.0.0.0 is set in the binding list or not. When set to enable, the ARP packets with the SIP address 0.0.0.0 will …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.23.3.2.1.3
swIpMacBindingPortForwardDhcpPkt This object can be set to forward DHCP packets or not forward DHCP packets on the specified port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.23.3.2.1.4
swIpMacBindingPortDHCPSnoopMaxEntry This object indicates the max entry created by DHCP packets on the specified port. Note: The max entry range is (0..N), the N value indicates the maximum number, which is determined by the project itself. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.3.2.1.5
swIpMacBindingPortDHCPSnoopEntryClearAction When set to start (2), the address binding entries learned for the specified ports will be cleared. When get, it always returns other (1).	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.23.3.2.1.6
swIpMacBindingPortMode The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified, the mode defaults to ARP mode. If the system is in ARP m…	Enumerationr/w Enumerated Values: 1 arp 2 acl	.1.3.6.1.4.1.171.12.23.3.2.1.7
swIpMacBindingPortStopLearningThreshold This object indicates the threshold to stop learning new MAC addresses on the specified port. When the number of blocked entries exceeds the threshold, the port will stop learning new addresses. The packet with new add…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.3.2.1.8
swIpMacBindingPortRecoverLearning When set to start (2), it will change from the stop_learning state to the normal state on the specified port. When get, it always returns other (1).	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.23.3.2.1.9
swIpMacBindingPortLearningStatus This object indicates the learning status of a port. When the status is stop (2), the port will stop learning new addresses and the packets with new addresses will be dropped.	Enumeration Enumerated Values: 1 normal 2 stop	.1.3.6.1.4.1.171.12.23.3.2.1.10
swIpMacBindingPortIPv6State This object enables/disables IPv6 IP-MAC binding on the specified port.	Enumerationr/w Enumerated Values: 1 other 2 enabled 3 disabled	.1.3.6.1.4.1.171.12.23.3.2.1.11
swIpMacBindingPortIPv6DHCPSnoopMaxEntry This object indicates the maximum number of entries that can be learned by IPv6 DHCP snooping on the specified port. Note: The maximum entry range is (0..N), the N value indicates the maximum number, which is determine…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.3.2.1.12
swIpMacBindingPortNDSnoopMaxEntry This object indicates the maximum number of entries that can be learned by ND snooping on the specified port. Note: The maximum entry range is (0..N), the N value indicates the maximum number, which is determined by th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.3.2.1.13
swIpMacBindingPortIPv6DHCPSnoopEntryClearAction When set to start (2), the address binding entries learned by IPv6 DHCP snooping on the specified ports will be cleared. When get, it always returns other (1).	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.23.3.2.1.14
swIpMacBindingPortNDSnoopEntryClearAction When set to start (2), the address binding entries learnt by ND snooping on the specified ports will be cleared. When get, it always returns other (1).	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.23.3.2.1.15
swIpMacBindingPortARPInspection This object used to set ARP inspection state on the specified port. When ARP inspection is enabled on the port, the legal ARP packets will be forward, while the illegal packets will be dropped. strict : I…	Enumerationr/w Enumerated Values: 1 disabled 2 strict 3 loose	.1.3.6.1.4.1.171.12.23.3.2.1.16
swIpMacBindingPortIPInspection This object used to set the IP inspection state on the specified port. When IP inspection is enabled on the port, the legal IP packets will be forwarded, while the illegal IP packets will be dropped.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.23.3.2.1.17
swIpMacBindingPortIPProtocol This object is used to set which kind of IP packets need to be checked by IP-MAC-PORT binding on the specified port. ipv4: Only IPv4 packets will be checked. ipv6: Only IPv6 packets will be checked. all: Both IPv4 and I…	Enumerationr/w Enumerated Values: 1 all 2 ipv4 3 ipv6	.1.3.6.1.4.1.171.12.23.3.2.1.18
swIpMacBindingPortNDInspection This object used to set ND inspection state on the specified port. When ND inspection is enabled on the port, the legal ND packets will be forward, while the illegal packets will be dropped.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.23.3.2.1.19
swIpMacBindingPortLimitRateValue This object is the threshold at which the specified limit rate will turn on. Note: The max entry range is (1..2048)pps. The value -1 means not limit the dhcp packet to cpu.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.3.2.1.20
swIpMacBindingPortLimitRateAction There are two actions to take for limit rate, drop and shutdown drop:discards dhcp packets that exceed the limit rate value shutdown:shutdown the port when the dhcp packet rate value specified for limit rate is reached.	Enumerationr/w Enumerated Values: 1 drop 2 shutdown	.1.3.6.1.4.1.171.12.23.3.2.1.21

This table specifies the IP-MAC binding information.

swIpMacBindingEntry row .1.3.6.1.4.1.171.12.23.4.1.1

The IP-MAC binding entry used to add/delete/configure the address
pair of the switch's authorized user database.

Indexes

swIpMacBindingIpIndex

Column	Syntax	OID
swIpMacBindingIpIndex The IP address of the IP-MAC binding entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.23.4.1.1.1
swIpMacBindingMac The MAC address of the IP-MAC binding entry.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.1.1.2
swIpMacBindingStatus The status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.23.4.1.1.3
swIpMacBindingPorts The port members of this entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.23.4.1.1.4
swIpMacBindingAction The action of this entry. Note: Supported in IP-MAC binding v3.5 and the earlier versions.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.1.1.5
swIpMacBindingMode The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified, the mode defaults to ARP mode. I…	Enumerationr/w Enumerated Values: 1 arp 2 acl 3 dhcp-snooping 4 static	.1.3.6.1.4.1.171.12.23.4.1.1.6
swIpMacBindingAclStatus This object indicates the ACL status of this entry.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.1.1.7

This table displays information regarding the blocked MAC addresses.

swIpMacBindingBlockedEntry row .1.3.6.1.4.1.171.12.23.4.2.1

The entry cannot be created or configured. It can only be deleted.

Indexes

swIpMacBindingBlockedVID swIpMacBindingBlockedMac

Column	Syntax	OID
swIpMacBindingBlockedVID This object specifies the VLAN ID.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.23.4.2.1.1
swIpMacBindingBlockedMac The MAC address that was blocked.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.2.1.2
swIpMacBindingBlockedVlanName This object specifies the VLAN name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.171.12.23.4.2.1.3
swIpMacBindingBlockedPort The port that the MAC is associated with.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.23.4.2.1.4
swIpMacBindingBlockedTypeobsolete The value is always blockByAddrBind. This entry will be deleted when the value is set to 'delete'.	Enumerationr/w Enumerated Values: 1 other 2 blockByAddrBind 3 delete	.1.3.6.1.4.1.171.12.23.4.2.1.5
swIpMacBindingBlockedTime This object specifies the last time that this entry was generated.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.171.12.23.4.2.1.6
swIpMacBindingBlockedStatus The status of this entry. Currently only the destroy (6) option can be used to delete this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.23.4.2.1.7

The table specifies information regarding the IP-MAC binding entries that were learned by the DHCP snooping 
function.

swIpMacBindingDHCPSnoopEntry row .1.3.6.1.4.1.171.12.23.4.3.1

A list containing information about the DHCP snooping learning
IP-MAC binding entry.

Indexes

swIpMacBindingDHCPSnoopIpIndex

Column	Syntax	OID
swIpMacBindingDHCPSnoopIpIndex The IP address of this entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.23.4.3.1.1
swIpMacBindingDHCPSnoopMac The MAC address of this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.3.1.2
swIpMacBindingDHCPSnoopLeaseTime Specifies the lease time of this entry. When the lease time expires, this entry will be removed from this port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.3.1.3
swIpMacBindingDHCPSnoopPort Specifies the port of this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.3.1.4
swIpMacBindingDHCPSnoopStatus Specifies the status (inactive or active) of this entry.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.3.1.5

This table specifies the IPv6 IP-MAC binding information.

swIpMacBindingIPv6Entry row .1.3.6.1.4.1.171.12.23.4.4.1

The IPv6 IP-MAC binding entry is used to add/delete/configure an
IPv6 address and MAC address pair in the switch's authorized user
database.

Indexes

swIpMacBindingIPv6Addr

Column	Syntax	OID
swIpMacBindingIPv6Addr The IPv6 address of the IPv6 IP-MAC binding entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.23.4.4.1.1
swIpMacBindingIPv6MacAddr The MAC address of the IPv6 IP-MAC binding entry.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.4.1.2
swIpMacBindingIPv6Portlist The port members of the IPv6 IP-MAC binding entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.23.4.4.1.3
swIpMacBindingIPv6Mode The mode of the IPv6 IP-MAC binding entry. static(1): When the Static mode is employed, it means this entry is manually configured. dhcp-snooping(2): This mode cannot be configured, and wh…	Enumeration Enumerated Values: 1 static 2 dhcp-snooping 3 nd-snooping	.1.3.6.1.4.1.171.12.23.4.4.1.4
swIpMacBindingIPv6ACLStatus The ACL Status of the IPv6 IP-MAC binding entry.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.4.1.5
swIpMacBindingIPv6RowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.23.4.4.1.6

The table specifies information regarding the IPv6 DHCP
snooping function learning IPv6 IP-MAC binding entries.

swIpMacBindingIPv6DHCPSnoopEntry row .1.3.6.1.4.1.171.12.23.4.5.1

A list containing information about the IPv6 DHCP snooping learning
IPv6 IP-MAC binding entry.

Indexes

swIpMacBindingIPv6DHCPSnoopAddr

Column	Syntax	OID
swIpMacBindingIPv6DHCPSnoopAddr The IPv6 address of this entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.23.4.5.1.1
swIpMacBindingIPv6DHCPSnoopMac The MAC address of this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.5.1.2
swIpMacBindingIPv6DHCPSnoopLeaseTime Specifies the lease time of this entry. When the lease time expires, this entry will be removed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.5.1.3
swIpMacBindingIPv6DHCPSnoopPort Specifies the port of this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.5.1.4
swIpMacBindingIPv6DHCPSnoopStatus Specifies the status (inactive or active) of this entry.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.5.1.5

The table specifies information regarding the ND
snooping function of learning IPv6 IP-MAC binding entries.

swIpMacBindingNDSnoopEntry row .1.3.6.1.4.1.171.12.23.4.6.1

A list of information about the ND snooping learning
IPv6 IP-MAC binding entry.

Indexes

swIpMacBindingNDSnoopAddr

Column	Syntax	OID
swIpMacBindingNDSnoopAddr The IPv6 address of this entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.23.4.6.1.1
swIpMacBindingNDSnoopMac The MAC address of this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.23.4.6.1.2
swIpMacBindingNDSnoopLeaseTime Specifies the lease time of this entry. When the lease time expires, this entry will be removed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.6.1.3
swIpMacBindingNDSnoopPort Specifies the port of this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.23.4.6.1.4
swIpMacBindingNDSnoopStatus Specifies the status (inactive or active) of this entry.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.171.12.23.4.6.1.5

This table indicates information about the DHCPv4 snooping binding entry upload or download parameters.

swIpMacBindingUploadDownloadEntry row .1.3.6.1.4.1.171.12.23.4.7.1

A list with the DHCPv4 snooping binding entry upload or download parameters.It's contains the Protocol type,
IP address type, IP address, Username, Password, TCP port number, Filename, and action of this entry

Indexes

swIpMacBindingUploadDownloadProtocol

Column	Syntax	OID
swIpMacBindingUploadDownloadProtocol This object provides the user with a choice of uploading or downloading the selected protocol type. tftp(1) selecting the TFTP protocol to upload or download the DHCPv4 snooping database. ftp(2) select…	Enumeration Enumerated Values: 1 tftp 2 ftp	.1.3.6.1.4.1.171.12.23.4.7.1.1
swIpMacBindingUploadDownloadServerIPAddressType A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also b…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.23.4.7.1.2
swIpMacBindingUploadDownloadServerIPAddress Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.23.4.7.1.3
swIpMacBindingUploadDownloadUsername The username and password to be authenticated by the FTP server. This value MUST be corresponding with Password object, and only use to FTP protocol.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.171.12.23.4.7.1.4
swIpMacBindingUploadDownloadPassword The username and password to be authenticated by the FTP server. This value MUST be corresponding with Username object, and only use to FTP protocol.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.171.12.23.4.7.1.5
swIpMacBindingUploadDownloadTcpPort This object indicates the FTP connecting port number.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.23.4.7.1.6
swIpMacBindingUploadDownloadFileName The name of the file to be downloaded from or uploaded to the TFTP or FTP server.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.171.12.23.4.7.1.7
swIpMacBindingUploadDownloadAction This object provides the user with a choice of uploading or downloading the selected file.	Enumerationr/w Enumerated Values: 1 upload 2 download	.1.3.6.1.4.1.171.12.23.4.7.1.10