INFINERA-TP-OTUKICTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
27

otukiCtpTable

table
.1.3.6.1.4.1.21296.2.2.2.2.31.1 · 1 row entry · 27 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk otukiCtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-OTUKICTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-OTUKICTP-MIB::otukiCtpTable' 
A list of OtuKiClientCtp entries. Each entry is uniquely identified by the value of ifIndex.
otukiCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.31.1.1
A OtuKiClientCtp entry containing information pertaining to Infinera OtuKiClientCtp interfaces.
Entries will exist in this table for interfaces of type otuKiclientCtp.
Indexes
Column Syntax OID
otukiCtpServiceMode
'None? is the default value indicated for the OTU client CTP when it is initially created.
OTUk alarms, loopbacks/diagnostics, PMs, etc. are intended to be supported in alignment with pre-R6 support for
similar SONET/…
INFINERA-TC-MIBInfnServiceMode
Type Values:
1none
2adaptation
3networkWrapper
4muxed
5transport
6switching
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.1
otukiCtpServiceModeQualifier
The Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which
this ODU client CTP is being used,). None? is the default value indicated for the OTU client CTP when it is initially crea…
INFINERA-TC-MIBInfnSMQ
Type Values:
1none
2smqWithoutFecErrFwd
3smqWithFecErrFwd
4smqMuxDemux
5smqOC192
6smqSTM64
7smq10GBE
8smqOC48
9smqSTM16
10smqGFP
11smqODU4i
12smqODU4
13smqODU3iPlus
14smqODU3i
15smqODU3
16smqODU2e
17smqODU2
18smqODU1e
19smqODU1
20smqODU0
21smqODU3e2
22smqODU3e1
23smqWithFecOam
24smqOc768
25smqStm256
26smqOduAdapti
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.2
otukiCtpFecCorrection
This atTermute is used to enable or disable the FEC correction at the ingress of the OTU client facility.
When Disabled, the FEC statistics are still provided. Applicable to:All OtuKiClientCtp.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.3
otukiCtpFecEnabled
This atTermute is used to enable or disable the G.709 Fec Generation
and handling on the OTU Term interface. If the FECEnabled is FALSE, all zeroes are inserted on the FEC overhead signal.
Similarly, a OTU Term interf…
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.4
otukiFecDecoderIterationCount
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.5
otukpropagationDelay
 INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.6
otukiBitRateK
 INFINERA-TC-MIBInfnOtuBitRateK
Type Values:
1otu3i
2otu4i
3otu3iplus
4otuAdapti25g
5otuAdapti37g5
6otuAdapti50g
7otuAdapti75g
8otuAdapti100g
9otuAdapti112g5
10otuAdapti125g
11otuAdapti150g
12otuAdapti175g
13otuAdapti187g5
14otuAdapti200g
15otuAdapti225g
16otuAdapti250g
17otuAdapti262g5
18otuAdapti300g
19otuAdapti337g5
20otuAdapti350g
21otuAdapti375g
22otuAdapti400g
23otuAdapti450g
24otuAdapti500g
25otuAdapti600g
26otuAdapti750g
27otuAdapti800g
28otuAdapti900g
29otuAdapti1000g
30otuAdapti1200g
31otuAdapti1500g
32otuAdapti1800g
33otuAdapti2000g
34otuAdapti2400g
35otuAdapti275g
36otuAdapti525g
37otuAdapti550g
38otuAdapti675g
39otuAdapti700g
40otuAdapti825g
41otuAdapti1050g
42otuAdapti1100g
43otuAdapti1350g
44otuAdapti1400g
45otuAdapti1600g
46otuAdapti1650g
47otuAdapti2200g
48na
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.7
otukiCtpFacTxTTI
The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.8
otukiCtpFacExpectedSAPI
The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction).
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.9
otukiCtpFacExpectedDAPI
The Destination Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction)
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.10
otukiCtpFacRxTTI
The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.11
otukiCtpFacPmHistStatsEnable
Flag to enable or disable the collection of PMs on the Terminal side of OTU Clients.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.12
otukiCtpFacMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
INFINERA-TC-MIBInfnMonitoringMode
Type Values:
1unused
2nim
3lim
4im
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.13
otukiCtpFacDSThreshold
This attribute indicates the Facility-side (e.g., Trib-side) threshold level for declaring a
performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks
in tha…
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.14
otukiCtpFacSDThreshold
This attribute indicates the Facility-side (e.g.,Trib-side) threshold level for declaring a
Degraded Signal defect. A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are
detected. Th…
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.15
otukiCtpFacTimDetMode
This atTermute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected
and Received TTI message. The following are the values and their meaning:
OFF: TIM-S is not reported.
DAPI: TIM-S is repo…
Enumerationr/w
Enumerated Values:
1off
2sapi
3dapi
4sapidapi
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.16
otukiCtpSupportingOchList
The Supporting OCH List that is this client is using.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.17
otukiCtpRxEb15MinutesTce
Number of ErrorBlock in receive direction during 15 minutes interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.18
otukiCtpRxEbDayTce
Number of ErrorBlock in receive direction during 24 hours interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.19
otukiCtpRxDs15MinutesTce
Number of Defect Seconds in receive direction during 15 minutes interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.20
otukiCtpRxDsDayTce
Number of Defect Seconds in receive direction during 24 hours interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.21
otukiCtpRxEbDayTceReporting
Flag that enables/disables the reporting of RxEbDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.22
otukiCtpRxEb15MinutesTceReporting
Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.23
otukiCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.24
otukiCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.25
otukiCtpAlarmReportControl
The Alarm Reporting Control Flag for the OTU Clients. .
INFINERA-TC-MIBInfnArcr/w
Type Values:
1allowed
2inhibited
Description:
This textual convention represents the alarm reporting control state of the manged objects.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.26
otukiCtpConfiguredServiceType
 INFINERA-TC-MIBInfnServiceType
Type Values:
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
117bw10gbe
118bw100gbe
119bwOtuAdapti
120bwOduAdapti
Description:
The infinera supported payloads.
 .1.3.6.1.4.1.21296.2.2.2.2.31.1.1.27