The trap signifies one dsl port is linked down.

The trap signifies XTU-R Loss of Framing is cleared.

The trap signifies XTU-R Loss of Signal is cleared.

The trap signifies XTU-R Loss of Power is cleared.

The trap signifies DSL modem code download failed.

The trap signifies DSL modem code download fail is cleared.

ignifies a DSL chip failure due to
modem code download faied for 10 times.

The trap signifies one dsl port is linked up.

The trap signifies XTU-C Loss of Framing.

The trap signifies XTU-C Loss of Signal.

The trap signifies XTU-R Loss of Framing.

The trap signifies XTU-R Loss of Signal.

The trap signifies XTU-R Loss of Power.

The trap signifies XTU-C Loss of Framing is cleared.

The trap signifies XTU-C Loss of Signal is cleared.

Hardware monitor itself diagnosis is failed.

ignifies that the external alarm input 1 of MSC card
is released.

ignifies that the external alarm input 2 of MSC card
is triggered.

ignifies that the external alarm input 2 of MSC card
is released.

ignifies that the external alarm input 3 of MSC card
is triggered.

ignifies that the external alarm input 3 of MSC card
is released.

ignifies that the external alarm input 4 of MSC card
is triggered.

ignifies that the external alarm input 4 of MSC card
is released.

ignifies that the external alarm input 5 of MSC card
is triggered.

ignifies that the external alarm input 5 of MSC card
is released.

ignifies that the external alarm input 6 of MSC card
is triggered.

sage to notify the manager that the voltage of the system is out of range.
The variable in the binding list is the current voltage in volt of the system.

ignifies that the external alarm input 6 of MSC card
is released.

ignifies that the external alarm input 7 of MSC card
is triggered.

ignifies that the external alarm input 7 of MSC card
is released.

ignifies that the external alarm input 8 of MSC card
is triggered.

ignifies that the external alarm input 8 of MSC card
is released.

The trap signifies power 1 not detected.

sage to notify the manager that the low-voltage condition is over.
The variable in the binding list is the current voltage in volt
of the system.

The trap signifies power 1 detected.

The trap signifies power 2 not detected.

The trap signifies power 2 detected.

The trap signifies power 1 voltage fail.

The trap signifies power 1 voltage is cleared.

The trap signifies power 2 voltage fail.

The trap signifies power 2 voltage is cleared.

ugIn trap signifies that the sending
protocol entity recognizes that one module is
plugged into the device.

llOut trap signifies that the sending
protocol entity recognizes one module is pulled out
from the device.

 trap signifies that the sending
protocol entity recognizes that one of the
modules represented in the agent's
configuration has come up.

sage to notify the manager that the temperature of the system is out of range.
The variable in the binding list is the current temperature in Celsius
of the system.

wn trap signifies that the sending
protocol entity recognizes a failure in one of
the modules represented in the agent's
configuration.

The trap signifies user disables one module.

The trap signifies invalid modlue detected.

The trap signifies invalid modlue is cleared.

 receive timing reference signal correctly.
The varable in the binding list is current reference.

 receive timing reference signal incorrectly.
The varable in the binding list is last reference.

The system received timing reference signal.

The system does not receive timing reference signal.

The system receives ToD sentence correctly.

sage to notify the manager that temperature is back to normal (temperature_out_of_range condition disappeared).
The variable in the binding list is the current temperature in Celsius
of the system.

The system does not receive ToD sentence correctly.

The system can not access clock synchronize chip correctly.

rddn-msc wrong fwVersion,skip provision

rddn-msc switch over

Signifies equipment cpu is overload.

Signifies equipment cpu overload is cleared.

The trap signifies AC power is down.

The trap signifies AC down alarm is cleared.

The trap signifies battery temperature is out of range.

The trap signifies battery temperature out of range alarm is cleared.

sage to notify the manager that the rpm of the fan is out of range.
The variable in the binding list is the current rpm of the fan.

The trap signifies battery voltage is under the threshold.

The trap signifies battery voltage low alarm is cleared.

The trap signifies battery voltage is under the threshold.

The trap signifies battery voltage critical alarm is cleared.

The trap signifies the battery voltage is too low to be charged.

The trap signifies battery voltage error alarm is cleared.

The trap signifies no battery is detected.

The trap signifies battery absent alarm is cleared.

The trap signifies charge current exceed the threshold.

The trap signifies charge current fault alarm is cleared.

sage to notify the manager that the out-of-range condition of the fan is over.
The variable in the binding list is the current rpm of the fan.

The trap signifies charge overtime.

The trap signifies charge overtime is cleared.

The trap signifies battery capacity invalid.

The trap signifies battery capacity invalid is cleared.

The trap signifies no thermal sensor connected.

The trap signifies no thermal sensor connected is cleared.

The trap signifies power 1 overheat.

The trap signifies power 1 overheat is cleared.

The trap signifies power 2 overheat.

The trap signifies power 2 overheat is cleared.

Send a message to notify the manager that the hardware RTC is failed.

The trap signifies power 1 LM5064 senseor fault.

The trap signifies power 1 LM5064 senseor fault is cleared.

The trap signifies power 2 LM5064 senseor fault.

The trap signifies power 2 LM5064 senseor fault is cleared.

The trap signifies DC power is down.

The trap signifies DC down alarm is cleared.

ignifies that the external alarm input 1 of MSC card
is triggered.

MAC anti-spoofing happened.

Signifies invalid manufacturing data.

Signifies SW image downloading/installing/restoring/reverting status.

Signifies configuration change from CLI command.

Alarm clear is activated.

e the system complete DHCP lease process.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused).
2) the IP address of DHCP server.
3) the IP address leased from DHCP server.

trap to unify system restart trap definition.
The standard ones ('warm start' and 'cold start') are no longer supported.
1) sysBootupFwVersion: the system happened restart with booting up firmware version.
2) sysRestartCause: what reason caused system restart.
3) sysRestartErrorCode: if this is a restart caused by software problem then error code is specified.
   '0': is specified is not related to software.

e the system failed to complete DHCP lease process on management interface.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused).

LeasedFailNotification.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused).

ignifies loop is detected by ifIndex.
The detected loop is between ifIndex and loopguardSenderIfIndex.

The trap signifies loop in ifIndex is cleared.

The trap signifies host termination attack is detected in ifIndex.

Alarm cutoff is activated.

Signifies memory is overload.

Signifies memory overload is cleared.

User login is failed.

Signifies MAC forwarding table full.

Signifies MAC forwarding table full is cleared.

t trap indicates that the sending agent has become the new root of the Spanning Tree;
the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the
Topology Change Timer, immediately subsequent to its election.  Implementation of this trap is optional.

A topologyChange is sent if the topology changed of MSTP has detected.

A fw_change is sent if the firmware changed of system has detected.

Signifies configuration reload from CLI command.

User login is OK.

Protect switch success.

Protect switch failed.

sage to the manager that the system is going to shutdown.
The variable is the reason that causes the system to shutdown.
Note: this notification should be sent before rebooting.

Signifies cpu is overload.

Signifies cpu overload is cleared.

Signifies configuration file uploading to EMS failed.

Signifies configuration file reload from FLASH failed.

Signifies writing to flash failed.

The trap signifies one ethernet port is linked down.

The trap signifies SFP module is over voltage threshold cleared.

The trap signifies SFP module is over temperature threshold cleared.

The trap signifies SFP module is over TX power threshold cleared.

The trap signifies SFP module is over RX power threshold cleared.

The trap signifies one ethernet port is linked up.

The trap signifies SFP module is over current threshold.

The trap signifies SFP module is over voltage threshold.

The trap signifies SFP module is over temperature threshold.

The trap signifies SFP module is over TX power threshold.

The trap signifies SFP module is over RX power threshold.

The trap signifies SFP module is over current threshold cleared.

ignifies one gbond interface port link down.
The 'ifIndex' is bonding interface index.

ignifies one gbond interface port linked up.
The 'ifIndex' is bonding interface index.

The trap signifies ont is loss of signal.

The trap signifies ont is remote defect indication cleared.

Loss of continuity can be detected when the GEM port network CTP supports a GEM interworking termination point cleared.

A failure on an internal interface or failed self-test.

A failure on an internal interface or failed self-test cleared.

Far-end loss of frame.

Far-end loss of frame cleared.

Far-end loss of link.

Far-end loss of link cleared.

Far-end loss of power.

Far-end loss of power cleared.

Far-end loss of signal.

The trap signifies ont is startup failure.

Far-end loss of signal cleared.

GEM frame starvation alarm.

GEM frame starvation alarm cleared.

Received downstream optical power above threshold.

Received downstream optical power above threshold cleared.

Transmit optical power above upper threshold.

Transmit optical power above upper threshold cleared.

Card has been removed without being deprovisioned.

The trap signifies ont is startup failure cleared.

Card has been removed without being deprovisioned cleared.

No carrier at the Ethernet UNI.

No carrier at the Ethernet UNI cleared.

Laser bias current above threshold determined by vendor; laser end of life pending.

Laser bias current above threshold determined by vendor; laser end of life pending cleared.

Failure of transmit laser imminent.

Failure of transmit laser imminent cleared.

Line configuration failure.

The trap signifies ont is loss of acknowledge.

Line configuration failure cleared.

Line initialization failure.

Line initialization failure cleared.

ONU has detected that the laser bias current is less than the configured threshold.

The trap signifies ont is loss of acknowledge cleared.

ONU has detected that the laser bias current is less than the configured threshold cleared.

ONU has detected that the power feed voltage is less than the configured threshold.

ONU has detected that the power feed voltage is less than the configured threshold cleared.

Received downstream optical power below threshold.

Received downstream optical power below threshold cleared.

ONU has detected that the temperature is under the configured threshold.

ONU has detected that the temperature is under the configured threshold cleared.

Transmit optical power below lower threshold.

Transmit optical power below lower threshold cleared.

Near-end loss of frame.

The trap signifies ont receives dying-gasp.

Near-end loss of frame cleared.

Near-end loss of link.

Near-end loss of link cleared.

Near-end loss of power.

Near-end loss of power cleared.

Near-end loss of signal.

Near-end loss of signal cleared.

Some services have been shut down to avoid equipment damage.

Some services have been shut down to avoid equipment damage cleared.

No service shutdown at present, but the circuit pack is operating beyond its recommended range.

The trap signifies ont receives dying-gasp cleared.

No service shutdown at present, but the circuit pack is operating beyond its recommended range cleared.

ONU has failed autonomous self-test.

ONU has failed autonomous self-test cleared.

The ONU is shutting down because the subscriber has turned off its power switch.

The ONU is shutting down because the subscriber has turned off its power switch cleared.

Applies if the ONU supports detection such as door or box open .

Applies if the ONU supports detection such as door or box open  cleared.

Applies if the ONU supports detection such as door or box open .

The trap signifies ont deactivates failure.

Applies if the ONU supports detection such as door or box open cleared.

Configured Plug-in LIM is not present.

Configured Plug-in LIM is not present cleared.

Inserted Plug-in LIM is wrong type.

Inserted Plug-in LIM is wrong type cleared.

Fuse failure or failure of DC/DC converter.

Fuse failure or failure of DC/DC converter cleared.

An autonomous equipment protection switch has occurred.

An autonomous equipment protection switch has occurred cleared.

The trap signifies ont deactivates failure cleared.

Bit error-based signal degrade.

Bit error-based signal degrade cleared.

Failure of circuit pack autonomous self-test.

Failure of circuit pack autonomous self-test cleared.

Bit error-based signal fail.

The trap signifies ont is drift of window.

Bit error-based signal fail cleared.

The trap signifies ont is loss of signal cleared.

The trap signifies ont is drift of window cleared.

Cannot authenticate a registration session.

Cannot authenticate a registration session cleared.

Failure response received from a registration server.

Failure response received from a registration server cleared.

Timeout waiting for response from a registration server.

The trap signifies ont is transmission interference warning.

Timeout waiting for response from a registration server cleared.

Received frames that were not an integral number of octets in length and did not pass the FCS check.

Received frames that were not an integral number of octets in length and did not pass the FCS check cleared.

Forwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table.

Forwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table cleared.

The trap signifies ont is transmission interference warning cleared.

The number of times that the receive buffer overflowed.

The number of times that the receive buffer overflowed cleared.

The number of times that the transmit buffer overflowed.

The number of times that the transmit buffer overflowed cleared.

The number of times that carrier sense was lost or never asserted when attempting to transmit a frame.

The number of times that carrier sense was lost or never asserted when attempting to transmit a frame cleared.

The trap signifies ont is signal fail.

First transmission attempt was delayed because the medium was busy.

The trap signifies ont is signal fail cleared.

First transmission attempt was delayed because the medium was busy cleared.

Frames discarded on this port because transmission was delayed.

Frames discarded on this port because transmission was delayed cleared.

The total number of events in which packets were dropped due to a lack of resources.

The total number of events in which packets were dropped due to a lack of resources cleared.

GEM frames with erroneous encryption key indexes.

The trap signifies ont is signal degraded.

GEM frames with erroneous encryption key indexes cleared.

The total number of error packets received on downstream.

The total number of error packets received on downstream cleared.

The total number of events in which frames were dropped due to a lack of resources on downstream.

The total number of events in which frames were dropped due to a lack of resources on downstream cleared.

The total number of packets received that were longer than 1518 octets on downstream.

The trap signifies ont is signal degraded cleared.

The total number of packets received that were longer than 1518 octets on downstream cleared.

The total number of packets received that were less than 64 octets long on downstream.

The total number of packets received that were less than 64 octets long on downstream cleared.

The total number of error packets received on upstream.

The total number of error packets received on upstream cleared.

The total number of events in which frames were dropped due to a lack of resources on upstream.

The total number of events in which frames were dropped due to a lack of resources on upstream cleared.

The total number of packets received that were longer than 1518 octets long on upstream.

The total number of packets received that were longer than 1518 octets long on upstream cleared.

The total number of packets received that were less than 64 octets long on upstream.

The trap signifies ont is loss of key synch.

The total number of packets received that were less than 64 octets long on upstream cleared.

Transmission failed due to excessive collisions.

Transmission failed due to excessive collisions cleared.

Counts frames received on a particular interface that were an integral number of octets in length.

Counts frames received on a particular interface that were an integral number of octets in length cleared.

The total number of packets received that were less than 64 octets long.

The total number of packets received that were less than 64 octets long cleared.

Counts received frames that exceeded the maximum permitted frame size.

The trap signifies ont is loss of key synch cleared.

Counts received frames that exceeded the maximum permitted frame size cleared.

Counts frames whose reception failed due to an internal MAC sublayer receive error.

Counts frames whose reception failed due to an internal MAC sublayer receive error cleared.

Counts frames whose transmission failed due to an internal MAC sublayer transmit error.

Counts frames whose transmission failed due to an internal MAC sublayer transmit error cleared.

Counts DNS errors received.

Counts DNS errors received cleared.

Counts ICMP errors received.

The trap signifies ont is FEC corrected byte.

Counts ICMP errors received cleared.

The total number of packets received that were longer than 1518 octets.

The total number of packets received that were longer than 1518 octets cleared.

A collision was detected later than 512 bit times into the transmission of a packet.

A collision was detected later than 512 bit times into the transmission of a packet cleared.

Counts frames discarded on this port because the MTU was exceeded.

Counts frames discarded on this port because the MTU was exceeded cleared.

Counts successfully transmitted frames whose transmission was delayed by more than one collision.

The trap signifies ont is loss of frame.

The trap signifies ont is FEC corrected byte cleared.

Counts successfully transmitted frames whose transmission was delayed by more than one collision cleared.