IEEE8023-MAU-MIB Table View

Table of descriptive and status information
about the MAU(s) attached to the ports of a
repeater.

rpMauEntry row .1.3.111.2.802.3.1.13.1.1.1.1

An entry in the table, containing information
about a single MAU.

Indexes

rpMauGroupIndex rpMauPortIndex rpMauIndex

Column	Syntax	OID
rpMauGroupIndex This variable uniquely identifies the group containing the port to which the MAU described by this entry is connected. Note: In practice, a group will generally be a field-replaceable unit (i.e., module,…	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.1.1.1.1
rpMauPortIndex This variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is connected.	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.1.1.1.2
rpMauIndex This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same port (rpMauPortIndex).	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.1.1.1.3
rpMauType This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifie…	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.111.2.802.3.1.13.1.1.1.1.4
rpMauStatus The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this …	Enumerationr/w Enumerated Values: 1 other 2 unknown 3 operational 4 standby 5 shutdown 6 reset	.1.3.111.2.802.3.1.13.1.1.1.1.5
rpMauMediaAvailable This object identifies Media Available state of the MAU, complementary to the rpMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMe…	IANA-MAU-MIBIANAifMauMediaAvailable Type Values: 1 other 2 unknown 3 available 4 notAvailable 5 remoteFault 6 invalidSignal 7 remoteJabber 8 remoteLinkLoss 9 remoteTest 10 offline 11 autoNegError 12 pmdLinkFault 13 wisFrameLoss 14 wisSignalLoss 15 pcsLinkFault 16 excessiveBER 17 dxsLinkFault 18 pxsLinkFault 19 availableReduced 20 ready	.1.3.111.2.802.3.1.13.1.1.1.1.6
rpMauMediaAvailableStateExits A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.1.1.1.7
rpMauJabberState The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent shall return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; fo…	Enumeration Enumerated Values: 1 other 2 unknown 3 noJabber 4 jabbering	.1.3.111.2.802.3.1.13.1.1.1.1.8
rpMauJabberingStateEnters A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). For MAUs of type dot3MauTypeAUI, dot3MauType100BaseT4, dot3MauType100BaseTX, dot3MauType100BaseFX, and all 1000 Mb/…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.1.1.1.9
rpMauFalseCarriers A count of the number of false carrier events during IDLE in 100BASE-X links. This counter does not increment at the symbol rate. It can increment after a valid carrier completion at a maximum rate of once per 100 ms un…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.1.1.1.10

Information about the external jacks attached
to MAUs attached to the ports of a repeater.

rpJackEntry row .1.3.111.2.802.3.1.13.1.1.2.1

An entry in the table, containing information
about a particular jack.

Indexes

rpMauGroupIndex rpMauPortIndex rpMauIndex rpJackIndex

Column	Syntax	OID
rpJackIndex This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU (rpMauIndex).	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.1.2.1.1
rpJackType The jack connector type, as it appears on the outside of the system.	IANA-MAU-MIBIANAifJackType Type Values: 1 other 2 rj45 3 rj45S 4 db9 5 bnc 6 fAUI 7 mAUI 8 fiberSC 9 fiberMIC 10 fiberST 11 telco 12 mtrj 13 hssdc 14 fiberLC 15 cx4 16 sfpPlusDA	.1.3.111.2.802.3.1.13.1.1.2.1.2

Table of descriptive and status information
about MAU(s) attached to an interface.

ifMauEntry row .1.3.111.2.802.3.1.13.1.2.1.1

An entry in the table, containing information
about a single MAU.

Indexes

ifMauIfIndex ifMauIndex

Column	Syntax	OID
ifMauIfIndex This variable uniquely identifies the interface to which the MAU described by this entry is connected.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.111.2.802.3.1.13.1.2.1.1.1
ifMauIndex This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (ifMauIfIndex).	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.2.1.1.2
ifMauType This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifie…	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.111.2.802.3.1.13.1.2.1.1.3
ifMauStatus The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this …	Enumerationr/w Enumerated Values: 1 other 2 unknown 3 operational 4 standby 5 shutdown 6 reset	.1.3.111.2.802.3.1.13.1.2.1.1.4
ifMauMediaAvailable This object identifies Media Available state of the MAU, complementary to the ifMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMe…	IANA-MAU-MIBIANAifMauMediaAvailable Type Values: 1 other 2 unknown 3 available 4 notAvailable 5 remoteFault 6 invalidSignal 7 remoteJabber 8 remoteLinkLoss 9 remoteTest 10 offline 11 autoNegError 12 pmdLinkFault 13 wisFrameLoss 14 wisSignalLoss 15 pcsLinkFault 16 excessiveBER 17 dxsLinkFault 18 pxsLinkFault 19 availableReduced 20 ready	.1.3.111.2.802.3.1.13.1.2.1.1.5
ifMauMediaAvailableStateExits A count of the number of times that ifMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.1.1.6
ifMauJabberState The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent shall return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; fo…	Enumeration Enumerated Values: 1 other 2 unknown 3 noJabber 4 jabbering	.1.3.111.2.802.3.1.13.1.2.1.1.7
ifMauJabberingStateEnters A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). This counter will indicate zero for MAUs of type dot3MauTypeAUI and those of speeds above 10 Mb/s. D…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.1.1.8
ifMauFalseCarriers A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will indicate zero. This counter does not increment at the symbol rate. …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.1.1.9
ifMauDefaultType This object identifies the default administrative baseband MAU type to be used in conjunction with the operational MAU type denoted by ifMauType. The set of possible values for this object is the same as …	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.111.2.802.3.1.13.1.2.1.1.10
ifMauAutoNegSupported This object indicates whether or not Auto-Negotiation is supported on this MAU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.13.1.2.1.1.11
ifMauTypeListBits A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. If Auto-Negotiation is present on this MAU, this object will map to ifMauAutoNegCapabilityBits. Note that this …	IANA-MAU-MIBIANAifMauTypeListBits Type Values: 0 bOther 1 bAUI 2 b10base5 3 bFoirl 4 b10base2 5 b10baseT 6 b10baseFP 7 b10baseFB 8 b10baseFL 9 b10broad36 10 b10baseTHD 11 b10baseTFD 12 b10baseFLHD 13 b10baseFLFD 14 b100baseT4 15 b100baseTXHD 16 b100baseTXFD 17 b100baseFXHD 18 b100baseFXFD 19 b100baseT2HD 20 b100baseT2FD 21 b1000baseXHD 22 b1000baseXFD 23 b1000baseLXHD 24 b1000baseLXFD 25 b1000baseSXHD 26 b1000baseSXFD 27 b1000baseCXHD 28 b1000baseCXFD 29 b1000baseTHD 30 b1000baseTFD 31 b10GbaseX 32 b10GbaseLX4 33 b10GbaseR 34 b10GbaseER 35 b10GbaseLR 36 b10GbaseSR 37 b10GbaseW 38 b10GbaseEW 39 b10GbaseLW 40 b10GbaseSW 41 b10GbaseCX4 42 b2BaseTL 43 b10PassTS 44 b100BaseBX10D 45 b100BaseBX10U 46 b100BaseLX10 47 b1000BaseBX10D 48 b1000BaseBX10U 49 b1000BaseLX10 50 b1000BasePX10D 51 b1000BasePX10U 52 b1000BasePX20D 53 b1000BasePX20U 54 b10GbaseT 55 b10GbaseLRM 56 b1000baseKX 57 b10GbaseKX4 58 b10GbaseKR 59 b10G1GbasePRXD1 60 b10G1GbasePRXD2 61 b10G1GbasePRXD3 62 b10G1GbasePRXU1 63 b10G1GbasePRXU2 64 b10G1GbasePRXU3 65 b10GbasePRD1 66 b10GbasePRD2 67 b10GbasePRD3 68 b10GbasePRU1 69 b10GbasePRU3 70 b40GbaseKR4 71 b40GbaseCR4 72 b40GbaseSR4 73 b40GbaseFR 74 b40GbaseLR4 75 b100GbaseCR10 76 b100GbaseSR10 77 b100GbaseLR4 78 b100GbaseER4 79 b1000baseT1 80 b1000basePX30D 81 b1000basePX30U 82 b1000basePX40D 83 b1000basePX40U 84 b10G1GbasePRXD4 85 b10G1GbasePRXU4 86 b10GbasePRD4 87 b10GbasePRU4 88 b25GbaseCR 89 b25GbaseCRS 90 b25GbaseKR 91 b25GbaseKRS 92 b25GbaseR 93 b25GbaseSR 94 b25GbaseT 95 b40GbaseER4 96 b40GbaseR 97 b40GbaseT 98 b100GbaseCR4 99 b100GbaseKR4 100 b100GbaseKP4 101 b100GbaseR 102 b100GbaseSR4 103 b2p5GbaseT 104 b5GbaseT	.1.3.111.2.802.3.1.13.1.2.1.1.12
ifMauHCFalseCarriers A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will indicate zero. This counter does not increment at the symbol rate. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.1.1.13
ifMauPCSCodingViolations Generalized nonresettable counter. This counter has a maximum increment rate of 25 000 000 counts per second for 100 Mb/s implementations and 125 000 000 counts per second for 1000 Mb/s implementations. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.1.1.14
ifMauFECAbility A read-only value that indicates if the PHY supports an optional FEC sublayer for forward error correction (see IEEE Std 802.3, 65.2 and IEEE Std 802.3, Clause 74). If an IEEE Std 802.3 Clause 45 MDIO …	Enumeration Enumerated Values: 1 unknown 2 supported 3 notsupported	.1.3.111.2.802.3.1.13.1.2.1.1.15
ifMauFECMode A read-write value that indicates the mode of operation of the optional FEC sublayer for forward error correction (see IEEE Std 802.3, 65.2 and IEEE Std 802.3, Clause 74). A GET operation returns the cu…	Enumerationr/w Enumerated Values: 1 unknown 2 disabled 3 enabled	.1.3.111.2.802.3.1.13.1.2.1.1.16
ifMauFECCorrectedBlocksdeprecated ********** THIS OBJECT IS DEPRECATED ********** Generalized nonresettable counter. This counter has a maximum increment rate of 1 200 000 counts per second for 1000 Mb/s implementations, and 5 000 000 c…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.1.1.17
ifMauFECUnCorrectableBlocksdeprecated ********** THIS OBJECT IS DEPRECATED ********** Generalized nonresettable counter. This counter has a maximum increment rate of 1 200 000 counts per second for 1000 Mb/s implementations, and 5 000 000 c…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.1.1.18
ifMauSNROpMarginChnlA The current SNR operating margin measured at the slicer input for channel A for the 10GBASE-T PMA. It is reported in units of 0.1 dB to an accuracy of 0.5 dB within the range of -12.7 dB to 12.7 dB. If an IEEE Std 8…	Integer32 Constraints: range: -127-127	.1.3.111.2.802.3.1.13.1.2.1.1.19
ifMauSNROpMarginChnlB The current SNR operating margin measured at the slicer input for channel B for the 10GBASE-T PMA. It is reported in units of 0.1 dB to an accuracy of 0.5 dB within the range of -12.7 dB to 12.7 dB. If an IEEE Std 8…	Integer32 Constraints: range: -127-127	.1.3.111.2.802.3.1.13.1.2.1.1.20
ifMauSNROpMarginChnlC The current SNR operating margin measured at the slicer input for channel C for the 10GBASE-T PMA. It is reported in units of 0.1 dB to an accuracy of 0.5 dB within the range of -12.7 dB to 12.7 dB. If an IEEE Std 8…	Integer32 Constraints: range: -127-127	.1.3.111.2.802.3.1.13.1.2.1.1.21
ifMauSNROpMarginChnlD The current SNR operating margin measured at the slicer input for channel D for the 10GBASE-T PMA. It is reported in units of 0.1 dB to an accuracy of 0.5 dB within the range of -12.7 dB to 12.7 dB. If an IEEE Std 8…	Integer32 Constraints: range: -127-127	.1.3.111.2.802.3.1.13.1.2.1.1.22
ifMauEEESupportList A read-only list of the possible PHY types for which the underlying system supports Energy-Efficient Ethernet (EEE) as defined in IEEE Std 802.3 Clause 78.	IANA-MAU-MIBIANAifMauTypeListBits Type Values: 0 bOther 1 bAUI 2 b10base5 3 bFoirl 4 b10base2 5 b10baseT 6 b10baseFP 7 b10baseFB 8 b10baseFL 9 b10broad36 10 b10baseTHD 11 b10baseTFD 12 b10baseFLHD 13 b10baseFLFD 14 b100baseT4 15 b100baseTXHD 16 b100baseTXFD 17 b100baseFXHD 18 b100baseFXFD 19 b100baseT2HD 20 b100baseT2FD 21 b1000baseXHD 22 b1000baseXFD 23 b1000baseLXHD 24 b1000baseLXFD 25 b1000baseSXHD 26 b1000baseSXFD 27 b1000baseCXHD 28 b1000baseCXFD 29 b1000baseTHD 30 b1000baseTFD 31 b10GbaseX 32 b10GbaseLX4 33 b10GbaseR 34 b10GbaseER 35 b10GbaseLR 36 b10GbaseSR 37 b10GbaseW 38 b10GbaseEW 39 b10GbaseLW 40 b10GbaseSW 41 b10GbaseCX4 42 b2BaseTL 43 b10PassTS 44 b100BaseBX10D 45 b100BaseBX10U 46 b100BaseLX10 47 b1000BaseBX10D 48 b1000BaseBX10U 49 b1000BaseLX10 50 b1000BasePX10D 51 b1000BasePX10U 52 b1000BasePX20D 53 b1000BasePX20U 54 b10GbaseT 55 b10GbaseLRM 56 b1000baseKX 57 b10GbaseKX4 58 b10GbaseKR 59 b10G1GbasePRXD1 60 b10G1GbasePRXD2 61 b10G1GbasePRXD3 62 b10G1GbasePRXU1 63 b10G1GbasePRXU2 64 b10G1GbasePRXU3 65 b10GbasePRD1 66 b10GbasePRD2 67 b10GbasePRD3 68 b10GbasePRU1 69 b10GbasePRU3 70 b40GbaseKR4 71 b40GbaseCR4 72 b40GbaseSR4 73 b40GbaseFR 74 b40GbaseLR4 75 b100GbaseCR10 76 b100GbaseSR10 77 b100GbaseLR4 78 b100GbaseER4 79 b1000baseT1 80 b1000basePX30D 81 b1000basePX30U 82 b1000basePX40D 83 b1000basePX40U 84 b10G1GbasePRXD4 85 b10G1GbasePRXU4 86 b10GbasePRD4 87 b10GbasePRU4 88 b25GbaseCR 89 b25GbaseCRS 90 b25GbaseKR 91 b25GbaseKRS 92 b25GbaseR 93 b25GbaseSR 94 b25GbaseT 95 b40GbaseER4 96 b40GbaseR 97 b40GbaseT 98 b100GbaseCR4 99 b100GbaseKR4 100 b100GbaseKP4 101 b100GbaseR 102 b100GbaseSR4 103 b2p5GbaseT 104 b5GbaseT	.1.3.111.2.802.3.1.13.1.2.1.1.23
ifMauEEELDFastRetrainCount A count of the number of 10GBASE-T fast retrains initiated by the local device. The indication reflects the state of the PHY event counter (see IEEE Std 802.3, 45.2.1.78.2 and 55.4.5.1.)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.1.1.24
ifMauEEELPFastRetrainCount A count of the number of 10GBASE-T fast retrains initiated by the link partner. The indication reflects the state of the PHY event counter (see IEEE Std 802.3, 45.2.1.78.1 and 55.4.5.1.)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.1.1.25
ifMauTimeSyncCapabilityTX This object indicates whether or not transmit Time Sync is supported on this MAU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.13.1.2.1.1.26
ifMauTimeSyncCapabilityRX This object indicates whether or not receive Time Sync is supported on this MAU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.13.1.2.1.1.27
ifMauTimeSyncDelayTXmax The maximum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Interface to PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is present, then the va…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.13.1.2.1.1.28
ifMauTimeSyncDelayTXmin The minimum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Interface to PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is present, then the va…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.13.1.2.1.1.29
ifMauTimeSyncDelayRXmax The maximum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Interface to PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is present, then the va…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.13.1.2.1.1.30
ifMauTimeSyncDelayRXmin The minimum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Interface to PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is present, then the va…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.13.1.2.1.1.31

Information about the external jacks attached
to MAUs attached to an interface.

ifJackEntry row .1.3.111.2.802.3.1.13.1.2.2.1

An entry in the table, containing information
about a particular jack.

Indexes

ifMauIfIndex ifMauIndex ifJackIndex

Column	Syntax	OID
ifJackIndex This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU.	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.3.1.13.1.2.2.1.1
ifJackType The jack connector type, as it appears on the outside of the system.	IANA-MAU-MIBIANAifJackType Type Values: 1 other 2 rj45 3 rj45S 4 db9 5 bnc 6 fAUI 7 mAUI 8 fiberSC 9 fiberMIC 10 fiberST 11 telco 12 mtrj 13 hssdc 14 fiberLC 15 cx4 16 sfpPlusDA	.1.3.111.2.802.3.1.13.1.2.2.1.2

Table of Per-PCS lane status information
about MAUs attached to an interface.

ifMauPerPCSLaneStatsEntry row .1.3.111.2.802.3.1.13.1.2.3.1

An entry in the table, containing information
about a single PCS lane.

Indexes

ifMauIfIndex ifMauIndex ifPCSLaneIndex

Column	Syntax	OID
ifPCSLaneIndex This object provides the identification of the PCS lane for which this ifMauPerPCSLaneStatsEntry is applicable. This object can hold an integer value from 0 to N-1, where N is the total number of PCS lanes supported …	Unsigned32 Constraints: range: 0-255	.1.3.111.2.802.3.1.13.1.2.3.1.1
ifMauPPLFECCorrectedBlocks Generalized nonresettable counter. This counter has a maximum increment rate of 1 200 000 counts per second for 1000 Mb/s implementations, 5 000 000 counts per second for 10 Gb/s and 40 Gb/s implementations, and 2 5…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.3.1.2
ifMauPPLFECUncorrectableBlocks Generalized nonresettable counter. This counter has a maximum increment rate of 1 200 000 counts per second for 1000 Mb/s implementations, 5 000 000 counts per second for 10 Gb/s and 40 Gb/s implementations, and 2 5…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.3.1.13.1.2.3.1.3
ifMauBIPErrorCount Generalized nonresettable counter. This counter has a maximum increment rate of 10 000 counts per second for 40 Gb/s implementations and 5 000 counts per second for 100 Gb/ s implementations. For 40/10…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.3.1.4
ifMauPCStoPHYLaneMapping For 40/100GBASE-R PHYs, an array of PCS lane identifiers. The indices of this array (0 to n?1) denote the service interface lane number where n is the number of PCS lanes in use. Each element of this array contains …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.3.1.13.1.2.3.1.5

Configuration and status objects for the
Auto-Negotiation function of MAUs attached to
interfaces.
          
The ifMauAutoNegTable applies to systems in
which Auto-Negotiation is supported on one or
more MAUs attached to interfaces. Note that if
Auto-Negotiation is present and enabled, the
ifMauType object reflects the result of the
Auto-Negotiation function.

ifMauAutoNegEntry row .1.3.111.2.802.3.1.13.1.5.1.1

An entry in the table, containing configuration
and status information for the Auto-Negotiation
function of a particular MAU.

Indexes

ifMauIfIndex ifMauIndex

Column	Syntax	OID
ifMauAutoNegAdminStatus Setting this object to enabled(1) will cause the interface that has the Auto-Negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.111.2.802.3.1.13.1.5.1.1.1
ifMauAutoNegRemoteSignaling A value indicating whether the remote end of the link is using Auto-Negotiation signaling. It takes the value detected(1) if and only if, during the previous link negotiation, FLP Bursts were received.	Enumeration Enumerated Values: 1 detected 2 notdetected	.1.3.111.2.802.3.1.13.1.5.1.1.2
ifMauAutoNegConfig A value indicating the current status of the Auto-Negotiation process. The enumeration parallelDetectFail(5) maps to a failure in parallel detection as defined in 28.2.3.1 of IEEE Std 802.3.	Enumeration Enumerated Values: 1 other 2 configuring 3 complete 4 disabled 5 parallelDetectFail	.1.3.111.2.802.3.1.13.1.5.1.1.4
ifMauAutoNegRestart If the value of this object is set to restart(1) then this will force Auto-Negotiation to begin link renegotiation. If Auto-Negotiation signaling is disabled, a write to this object has no effect. Setting the value of t…	Enumerationr/w Enumerated Values: 1 restart 2 norestart	.1.3.111.2.802.3.1.13.1.5.1.1.5
ifMauAutoNegCapabilityBits A value that uniquely identifies the set of capabilities of the local Auto-Negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. No…	IANA-MAU-MIBIANAifMauAutoNegCapBits Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD 16 b10GbaseT 17 b1000baseKX 18 b10GbaseKX4 19 b10GbaseKR 20 b40GbaseKR4 21 b40GbaseCR4 22 b100GbaseCR10 23 b1000baseT1 24 b25GbaseRS 25 b25GbaseR 26 bRSFEC25Greq 27 bBaseFEC25Greq 28 b25GbaseT 29 b40GbaseT 30 b100GbaseCR4 31 b100GbaseKR4 32 b100GbaseKP4 33 bForceMS	.1.3.111.2.802.3.1.13.1.5.1.1.6
ifMauAutoNegCapAdvertisedBits A value that uniquely identifies the set of capabilities advertised by the local Auto-Negotiation entity. Capabilities in this object that are not available in ifMauAutoNegCapabilityBits cannot be enabled…	IANA-MAU-MIBIANAifMauAutoNegCapBitsr/w Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD 16 b10GbaseT 17 b1000baseKX 18 b10GbaseKX4 19 b10GbaseKR 20 b40GbaseKR4 21 b40GbaseCR4 22 b100GbaseCR10 23 b1000baseT1 24 b25GbaseRS 25 b25GbaseR 26 bRSFEC25Greq 27 bBaseFEC25Greq 28 b25GbaseT 29 b40GbaseT 30 b100GbaseCR4 31 b100GbaseKR4 32 b100GbaseKP4 33 bForceMS	.1.3.111.2.802.3.1.13.1.5.1.1.7
ifMauAutoNegCapReceivedBits A value that uniquely identifies the set of capabilities received from the remote Auto-Negotiation entity. Note that interfaces that support this MIB may be attached to remote Auto-Negotiation entities that have capabil…	IANA-MAU-MIBIANAifMauAutoNegCapBits Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD 16 b10GbaseT 17 b1000baseKX 18 b10GbaseKX4 19 b10GbaseKR 20 b40GbaseKR4 21 b40GbaseCR4 22 b100GbaseCR10 23 b1000baseT1 24 b25GbaseRS 25 b25GbaseR 26 bRSFEC25Greq 27 bBaseFEC25Greq 28 b25GbaseT 29 b40GbaseT 30 b100GbaseCR4 31 b100GbaseKR4 32 b100GbaseKP4 33 bForceMS	.1.3.111.2.802.3.1.13.1.5.1.1.8
ifMauAutoNegRemoteFaultAdvertised A value that identifies any local fault indications that this MAU has detected and will advertise at the next Auto-Negotiation interaction for 1000 Mb/s MAUs.	Enumerationr/w Enumerated Values: 1 noError 2 offline 3 linkFailure 4 autoNegError	.1.3.111.2.802.3.1.13.1.5.1.1.9
ifMauAutoNegRemoteFaultReceived A value that identifies any fault indications received from the far end of a link by the local Auto-Negotiation entity for 1000 Mb/s MAUs.	Enumeration Enumerated Values: 1 noError 2 offline 3 linkFailure 4 autoNegError	.1.3.111.2.802.3.1.13.1.5.1.1.10