IEEE8023-EtherLike-MIB

        The MIB module to describe generic objects for
Ethernet-like network interfaces.
    
Source file
IEEE8023-EtherLike-MIB
Last revised
Identity
ieee8023etherMIB
Base OID
1.3.111.2.802.3.1.10
Imported Objects
IF-MIB ifIndex InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) org Unsigned32
SNMPv2-TC TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8023-EtherLike-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8023-EtherLike-MIB::ieee8023etherMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8023-EtherLike-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8023-EtherLike-MIB::ieee8023etherMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (66)
.1.3.111.2.802.3.1.10
.1.3.111.2.802.3.1.10.1
.1.3.111.2.802.3.1.10.1.10
.1.3.111.2.802.3.1.10.1.10.1
Enumeration
.1.3.111.2.802.3.1.10.1.10.1.1
Enumeration
.1.3.111.2.802.3.1.10.1.10.1.2
.1.3.111.2.802.3.1.10.1.10.1.3
.1.3.111.2.802.3.1.10.1.10.1.4
.1.3.111.2.802.3.1.10.1.10.1.5
.1.3.111.2.802.3.1.10.1.10.1.6
.1.3.111.2.802.3.1.10.1.11
.1.3.111.2.802.3.1.10.1.11.1
.1.3.111.2.802.3.1.10.1.11.1.1
.1.3.111.2.802.3.1.10.1.11.1.10
.1.3.111.2.802.3.1.10.1.11.1.2
.1.3.111.2.802.3.1.10.1.11.1.3
.1.3.111.2.802.3.1.10.1.11.1.4
.1.3.111.2.802.3.1.10.1.11.1.5
.1.3.111.2.802.3.1.10.1.11.1.6
.1.3.111.2.802.3.1.10.1.11.1.7
.1.3.111.2.802.3.1.10.1.11.1.8
.1.3.111.2.802.3.1.10.1.11.1.9
.1.3.111.2.802.3.1.10.1.12
.1.3.111.2.802.3.1.10.1.13
.1.3.111.2.802.3.1.10.1.13.1
.1.3.111.2.802.3.1.10.1.13.1.1
.1.3.111.2.802.3.1.10.1.13.1.2
.1.3.111.2.802.3.1.10.1.13.1.3
.1.3.111.2.802.3.1.10.1.14
.1.3.111.2.802.3.1.10.1.14.1
Enumeration
.1.3.111.2.802.3.1.10.1.14.1.1
Enumeration
.1.3.111.2.802.3.1.10.1.14.1.2
.1.3.111.2.802.3.1.10.1.14.1.3
.1.3.111.2.802.3.1.10.1.14.1.4
.1.3.111.2.802.3.1.10.1.2
.1.3.111.2.802.3.1.10.1.2.1
.1.3.111.2.802.3.1.10.1.2.1.1
.1.3.111.2.802.3.1.10.1.2.1.10
.1.3.111.2.802.3.1.10.1.2.1.11
.1.3.111.2.802.3.1.10.1.2.1.13
.1.3.111.2.802.3.1.10.1.2.1.16
.1.3.111.2.802.3.1.10.1.2.1.17
Enumeration
.1.3.111.2.802.3.1.10.1.2.1.18
.1.3.111.2.802.3.1.10.1.2.1.19
.1.3.111.2.802.3.1.10.1.2.1.2
Enumeration
.1.3.111.2.802.3.1.10.1.2.1.20
Enumeration
.1.3.111.2.802.3.1.10.1.2.1.21
.1.3.111.2.802.3.1.10.1.2.1.3
.1.3.111.2.802.3.1.10.1.2.1.4
.1.3.111.2.802.3.1.10.1.2.1.5
.1.3.111.2.802.3.1.10.1.2.1.6
.1.3.111.2.802.3.1.10.1.2.1.7
.1.3.111.2.802.3.1.10.1.2.1.8
.1.3.111.2.802.3.1.10.1.2.1.9
.1.3.111.2.802.3.1.10.1.5
.1.3.111.2.802.3.1.10.1.5.1
Integer32
.1.3.111.2.802.3.1.10.1.5.1.2
.1.3.111.2.802.3.1.10.1.5.1.3
.1.3.111.2.802.3.1.10.1.9
.1.3.111.2.802.3.1.10.1.9.1
Bits
.1.3.111.2.802.3.1.10.1.9.1.1
.1.3.111.2.802.3.1.10.1.9.1.2
.1.3.111.2.802.3.1.10.1.9.1.3
.1.3.111.2.802.3.1.10.2
.1.3.111.2.802.3.1.10.2.1
.1.3.111.2.802.3.1.10.2.2
Dependencies (6) 4 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. IEEE8023-EtherLike-MIBrfcselected
Conformance Groups (16)
A collection of objects providing a histogram
of packets successfully transmitted after
experiencing exactly N collisions.
.1.3.111.2.802.3.1.10.2.1.1
A collection of objects providing information
applicable to Ethernet-like network interfaces
capable of operating at 10 Mb/s or slower in
half-duplex mode.
.1.3.111.2.802.3.1.10.2.1.2
A collection of objects providing information
applicable to Ethernet-like network interfaces
capable of operating at 100 Mb/s or faster.
.1.3.111.2.802.3.1.10.2.1.3
A collection of objects providing information
about the duplex mode of an Ethernet-like
network interface.
.1.3.111.2.802.3.1.10.2.1.4
A collection of objects providing information
about the MAC Control sublayer on Ethernet-like
network interfaces.
.1.3.111.2.802.3.1.10.2.1.5
A collection of objects providing information
about and control of the MAC Control PAUSE
function on Ethernet-like network interfaces.
.1.3.111.2.802.3.1.10.2.1.6
A collection of objects providing information
applicable to all Ethernet-like network
interfaces.
.1.3.111.2.802.3.1.10.2.1.7
A collection of objects providing information
applicable only to half-duplex Ethernet-like
network interfaces.
.1.3.111.2.802.3.1.10.2.1.8
A collection of objects providing high-capacity
statistics applicable to higher-speed
Ethernet-like network interfaces.
.1.3.111.2.802.3.1.10.2.1.9
A collection of objects providing high-capacity
statistics for the MAC Control sublayer on
higher-speed Ethernet-like network interfaces.
.1.3.111.2.802.3.1.10.2.1.10
A collection of objects providing high-capacity
statistics for the MAC Control PAUSE function on
higher-speed Ethernet-like network interfaces.
.1.3.111.2.802.3.1.10.2.1.11
A collection of objects providing information
about the Rate Control function on Ethernet-like
interfaces.
.1.3.111.2.802.3.1.10.2.1.12
A collection of objects providing information
about the Low Power Idle function on Ethernet-like
interfaces.
.1.3.111.2.802.3.1.10.2.1.13
An object providing control and information
about the frame transmission rate limit for
Slow Protocols on Ethernet-like interfaces.
.1.3.111.2.802.3.1.10.2.1.14
A collection of objects providing information
about the Extension MAC Control function on
Ethernet-like interfaces.
.1.3.111.2.802.3.1.10.2.1.15
A collection of objects providing information
about the Priority Flow Control function on
Ethernet-like interfaces.
.1.3.111.2.802.3.1.10.2.1.16
Compliance Statements (1)

OID .1.3.111.2.802.3.1.10.2.2.1
The compliance statement for managed network
entities which have Ethernet-like network
interfaces.

Note that compliance with this MIB module
requires compliance with the ifCompliance3
MODULE-COMPLIANCE statement of the IF-MIB
(IETF RFC 2863). In addition, compliance with this
MIB module requires compliance with the
mauModIfCompl3 MODULE-COMPLIANCE statement of
the MAU-MIB module defined in Clause 13.
Required groups
mandatory etherStatsBaseGroup2
optional etherDuplexGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating in full-duplex mode.
It is highly recommended for all
Ethernet-like network interfaces.
optional etherRateControlGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating at speeds faster than
1000 Mb/s. It is highly recommended for all
Ethernet-like network interfaces.
optional etherStatsLowSpeedGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating at 10 Mb/s or slower in
half-duplex mode.
optional etherStatsHighSpeedGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating at 100 Mb/s or faster.
optional etherStatsHalfDuplexGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating in half-duplex mode.
optional etherHCStatsGroup This group is mandatory for all
Ethernet-like network interfaces which are
capable of operating at 10 Gb/s or faster.
It is recommended for all Ethernet-like
network interfaces which are capable of
operating at 1000 Mb/s or faster.
optional etherControlGroup This group is mandatory for all
Ethernet-like network interfaces that
support the MAC Control sublayer.
optional etherHCControlGroup This group is mandatory for all
Ethernet-like network interfaces that
support the MAC Control sublayer and are
capable of operating at 10 Gb/s or faster.
optional etherControlPauseGroup This group is mandatory for all
Ethernet-like network interfaces that
support the MAC Control PAUSE function.
optional etherHCControlPauseGroup This group is mandatory for all
Ethernet-like network interfaces that
support the MAC Control PAUSE function and
are capable of operating at 10 Gb/s or
faster.
optional etherCollisionTableGroup This group is optional. It is appropriate
for all Ethernet-like network interfaces
which are capable of operating in
half-duplex mode and have the necessary
metering. Implementation in systems with
such interfaces is highly recommended.
optional etherHCStatsLpiGroup This group is mandatory for all
Ethernet-like network interfaces that
support the Low Power Idle function.
optional etherSlowProtocolsGroup This group is optional. It is appropriate for
Ethernet-like network interfaces that implement OAM
as defined in Clause 57 of IEEE Std 802.3.
optional etherExtensionMacCtrlGroup This group is mandatory for all
Ethernet-like network interfaces that implement
Extension MAC Control.
optional etherPfcGroup This group is mandatory for all
Ethernet-like network interfaces that implement
Priority Flow Control.