IEEE8021-Q-BRIDGE-MIB Table View

A table that contains generic information about every
VLAN Bridge.

ieee8021QBridgeEntry row .1.3.111.2.802.1.1.4.1.1.1.1

A list of objects containing information for each VLAN Bridge.

Indexes

ieee8021QBridgeComponentId

Column	Syntax	OID
ieee8021QBridgeComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.1.1.1.1
ieee8021QBridgeVlanVersionNumber The version number of IEEE 802.1Q that this device supports. Reported as 1 by VLAN Bridges that support only SST operation, and reported as 2 by VLAN Bridges that support MST operation.	Enumeration Enumerated Values: 1 version1 2 version2	.1.3.111.2.802.1.1.4.1.1.1.1.2
ieee8021QBridgeMaxVlanId The maximum IEEE 802.1Q VLAN-ID that this device supports.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.1.1.1.3
ieee8021QBridgeMaxSupportedVlans The maximum number of IEEE 802.1Q VLANs that this device supports.	vlansSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.4.1.1.1.1.4
ieee8021QBridgeNumVlans The current number of IEEE 802.1Q VLANs that are configured in this device.	vlansSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.4.1.1.1.1.5
ieee8021QBridgeMvrpEnabledStatus The administrative status requested by management for MVRP. The value true(1) indicates that MVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When false(2), MVRP is …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.4.1.1.1.1.6

This table provides the capability to create and delete
customer VLAN ports.  Entries in this table must be
persistent over power up restart/reboot.

ieee8021QBridgeCVlanPortEntry row .1.3.111.2.802.1.1.4.1.1.2.1

A list of objects containing information for each VLAN Bridge.

Indexes

ieee8021QBridgeCVlanPortComponentId ieee8021QBridgeCVlanPortNumber

Column	Syntax	OID
ieee8021QBridgeCVlanPortComponentId The componentcontaining the customer VLAN port represented by this row.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.1.2.1.1
ieee8021QBridgeCVlanPortNumber The customer VLAN port number represented by this row.	IEEE8021-TC-MIBIEEE8021BridgePortNumber Type Constraints: range: 1..65535	.1.3.111.2.802.1.1.4.1.1.2.1.2
ieee8021QBridgeCVlanPortRowStatus This indicates the status of the entry, and is used to create and delete entries in this table. Each entry in this table that is valid will have a corresponding entry in the ieee8021BridgeBasePortTable whose value for …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.1.2.1.3

A table that contains configuration and control
information for each Filtering Database currently
operating on this device.  Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
ieee8021QBridgeVlanCurrentTable.

ieee8021QBridgeFdbEntry row .1.3.111.2.802.1.1.4.1.2.1.1

Information about a specific Filtering Database.

Indexes

ieee8021QBridgeFdbComponentId ieee8021QBridgeFdbId

Column	Syntax	OID
ieee8021QBridgeFdbComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.2.1.1.1
ieee8021QBridgeFdbId The identity of this Filtering Database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.111.2.802.1.1.4.1.2.1.1.2
ieee8021QBridgeFdbDynamicCount The current number of dynamic entries in this Filtering Database.	database entriesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.4.1.2.1.1.3
ieee8021QBridgeFdbLearnedEntryDiscards The total number of Filtering Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Filtering Database. If this counter is increasing, it indicates th…	database entriesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.1.1.4.1.2.1.1.4
ieee8021QBridgeFdbAgingTime The timeout period in seconds for aging out dynamically-learned forwarding information. IEEE Std 802.1D-1998 recommends a default of 300 seconds. The value of this object MUST be retained across reinitial…	secondsInteger32r/w Constraints: range: 10-1000000	.1.3.111.2.802.1.1.4.1.2.1.1.5

A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame.

ieee8021QBridgeTpFdbEntry row .1.3.111.2.802.1.1.4.1.2.2.1

Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information.

Indexes

ieee8021QBridgeFdbComponentId ieee8021QBridgeFdbId ieee8021QBridgeTpFdbAddress

Column	Syntax	OID
ieee8021QBridgeTpFdbAddress A unicast MAC address for which the device has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.111.2.802.1.1.4.1.2.2.1.1
ieee8021QBridgeTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress has been seen. A value of '0' indicates that…	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.4.1.2.2.1.2
ieee8021QBridgeTpFdbStatus The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of ieee8021QBridgeT…	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.111.2.802.1.1.4.1.2.2.1.3

A table containing filtering information for VLANs
configured into the Bridge by (local or network)
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.

ieee8021QBridgeTpGroupEntry row .1.3.111.2.802.1.1.4.1.2.3.1

Filtering information configured into the Bridge by
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address are allowed to b…

Indexes

ieee8021QBridgeVlanCurrentComponentId ieee8021QBridgeVlanIndex ieee8021QBridgeTpGroupAddress

Column	Syntax	OID
ieee8021QBridgeTpGroupAddress The destination Group MAC address in a frame to which this entry's filtering information applies.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.111.2.802.1.1.4.1.2.3.1.1
ieee8021QBridgeTpGroupEgressPorts The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in…	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.2.3.1.2
ieee8021QBridgeTpGroupLearnt The subset of ports in ieee8021QBridgeTpGroupEgressPorts that were learned by MMRP or some other dynamic mechanism, in this Filtering database.	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.2.3.1.3

A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by MMRP.  An entry appears in
this table for all VLANs that are currently
instantiated.

ieee8021QBridgeForwardAllEntry row .1.3.111.2.802.1.1.4.1.2.4.1

Forwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
MMRP.

Indexes

ieee8021QBridgeVlanCurrentComponentId ieee8021QBridgeForwardAllVlanIndex

Column	Syntax	OID
ieee8021QBridgeForwardAllVlanIndex The VLAN-ID or other identifier referring to this VLAN.	IEEE8021-TC-MIBIEEE8021VlanIndexOrWildcard Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.2.4.1.1
ieee8021QBridgeForwardAllPorts The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by MMRP, or configured statically by mana…	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.2.4.1.2
ieee8021QBridgeForwardAllStaticPorts The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardA…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.2.4.1.3
ieee8021QBridgeForwardAllForbiddenPorts The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the device is…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.2.4.1.4

A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which no
more specific forwarding information applies.  This is
configured statically by management and determined
dynamically by MMRP.  An entry appears in this table for
all VLANs that are currently instantiated.

ieee8021QBridgeForwardUnregisteredEntry row .1.3.111.2.802.1.1.4.1.2.5.1

Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynami…

Indexes

ieee8021QBridgeVlanCurrentComponentId ieee8021QBridgeForwardUnregisteredVlanIndex

Column	Syntax	OID
ieee8021QBridgeForwardUnregisteredVlanIndex The VLAN-ID or other identifier referring to this VLAN.	IEEE8021-TC-MIBIEEE8021VlanIndexOrWildcard Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.2.5.1.1
ieee8021QBridgeForwardUnregisteredPorts The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined …	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.2.5.1.2
ieee8021QBridgeForwardUnregisteredStaticPorts The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also ap…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.2.5.1.3
ieee8021QBridgeForwardUnregisteredForbiddenPorts The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the …	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.2.5.1.4

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  
Entries are valid for unicast addresses only.
          
Two modes of operation are supported by this table. When
the receive port index is non-zero, this table is
supporting an IEEE 802.1D filtering database as specified in
14.7.6.1 of IEEE Std 802.1D.  If the receive port is zero,
the table is operating as specified in IEEE Std 802.1Q 
8.8.1 and 12.7.7.  An agent must at least 
support the IEEE Std 802.1Q mode of operation.

ieee8021QBridgeStaticUnicastEntry row .1.3.111.2.802.1.1.4.1.3.1.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

ieee8021QBridgeStaticUnicastComponentId ieee8021QBridgeStaticUnicastVlanIndex ieee8021QBridgeStaticUnicastAddress ieee8021QBridgeStaticUnicastReceivePort

Column	Syntax	OID
ieee8021QBridgeStaticUnicastComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.3.1.1.1
ieee8021QBridgeStaticUnicastVlanIndex The Vlan to which this entry applies.	IEEE8021-TC-MIBIEEE8021VlanIndexOrWildcard Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.3.1.1.2
ieee8021QBridgeStaticUnicastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.111.2.802.1.1.4.1.3.1.1.3
ieee8021QBridgeStaticUnicastReceivePort Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the de…	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.4.1.3.1.1.4
ieee8021QBridgeStaticUnicastStaticEgressPorts The set of ports to which frames received from a specific port and destined for a specific unicast address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set …	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.3.1.1.5
ieee8021QBridgeStaticUnicastForbiddenEgressPorts The set of ports to which frames received from a specific port and destined for a specific unicast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in t…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.3.1.1.6
ieee8021QBridgeStaticUnicastStorageType The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.4.1.3.1.1.7
ieee8021QBridgeStaticUnicastRowStatus This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.3.1.1.8

A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded.  A value of zero in this table (as the port
number from which frames with a specific destination
address are received) is used to specify all ports for
which there is no specific entry in this table for that
particular destination address.  Entries are valid for
Multicast and Broadcast addresses only.

ieee8021QBridgeStaticMulticastEntry row .1.3.111.2.802.1.1.4.1.3.2.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
des…

Indexes

ieee8021QBridgeVlanCurrentComponentId ieee8021QBridgeVlanIndex ieee8021QBridgeStaticMulticastAddress ieee8021QBridgeStaticMulticastReceivePort

Column	Syntax	OID
ieee8021QBridgeStaticMulticastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.111.2.802.1.1.4.1.3.2.1.1
ieee8021QBridgeStaticMulticastReceivePort Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the de…	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.4.1.3.2.1.2
ieee8021QBridgeStaticMulticastStaticEgressPorts The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.3.2.1.3
ieee8021QBridgeStaticMulticastForbiddenEgressPorts The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may no…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.3.2.1.4
ieee8021QBridgeStaticMulticastStorageType The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.4.1.3.2.1.5
ieee8021QBridgeStaticMulticastRowStatus This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.3.2.1.6

A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received.

ieee8021QBridgeVlanCurrentEntry row .1.3.111.2.802.1.1.4.1.4.2.1

Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received.

Indexes

ieee8021QBridgeVlanTimeMark ieee8021QBridgeVlanCurrentComponentId ieee8021QBridgeVlanIndex

Column	Syntax	OID
ieee8021QBridgeVlanTimeMark A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.	RMON2-MIBTimeFilter	.1.3.111.2.802.1.1.4.1.4.2.1.1
ieee8021QBridgeVlanCurrentComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.4.2.1.2
ieee8021QBridgeVlanIndex The VLAN-ID or other identifier referring to this VLAN.	IEEE8021-TC-MIBIEEE8021VlanIndex Type Constraints: range: 1..4094 range: 4096..4294967295	.1.3.111.2.802.1.1.4.1.4.2.1.3
ieee8021QBridgeVlanFdbId The Filtering Database used by this VLAN. This is one of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamica…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.4.1.4.2.1.4
ieee8021QBridgeVlanCurrentEgressPorts The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.4.2.1.5
ieee8021QBridgeVlanCurrentUntaggedPorts The set of ports that are transmitting traffic for this VLAN as untagged frames.	Q-BRIDGE-MIBPortList	.1.3.111.2.802.1.1.4.1.4.2.1.6
ieee8021QBridgeVlanStatus This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, correspond…	Enumeration Enumerated Values: 1 other 2 permanent 3 dynamicMvrp	.1.3.111.2.802.1.1.4.1.4.2.1.7
ieee8021QBridgeVlanCreationTime The value of sysUpTime when this VLAN was created.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.4.1.4.2.1.8

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are persistent and will
be restored after the device is reset.

ieee8021QBridgeVlanStaticEntry row .1.3.111.2.802.1.1.4.1.4.3.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

ieee8021QBridgeVlanStaticComponentId ieee8021QBridgeVlanStaticVlanIndex

Column	Syntax	OID
ieee8021QBridgeVlanStaticComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.4.3.1.1
ieee8021QBridgeVlanStaticVlanIndex The VLAN-ID or other identifier referring to this VLAN.	IEEE8021-TC-MIBIEEE8021VlanIndex Type Constraints: range: 1..4094 range: 4096..4294967295	.1.3.111.2.802.1.1.4.1.4.3.1.2
ieee8021QBridgeVlanStaticName An administratively assigned string, which may be used to identify the VLAN.	OctetStringr/w Constraints: range: 0-32	.1.3.111.2.802.1.1.4.1.4.3.1.3
ieee8021QBridgeVlanStaticEgressPorts The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant MVR…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.4.3.1.4
ieee8021QBridgeVlanForbiddenEgressPorts The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar contro…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.4.3.1.5
ieee8021QBridgeVlanStaticUntaggedPorts The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (ieee8021QBridgeVlanIndex = 1) is a string of appropriate length including all ports…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.4.1.4.3.1.6
ieee8021QBridgeVlanStaticRowStatus This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.4.3.1.7

A table that contains information about the next free VLAN
value for a statically configured VLAN Bridge.

ieee8021QBridgeNextFreeLocalVlanEntry row .1.3.111.2.802.1.1.4.1.4.4.1

The next free VLAN value for a statically configured VLAN Bridge

Indexes

ieee8021QBridgeNextFreeLocalVlanComponentId

Column	Syntax	OID
ieee8021QBridgeNextFreeLocalVlanComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.4.4.1.1
ieee8021QBridgeNextFreeLocalVlanIndex The next available value for ieee8021QBridgeVlanIndex of a local VLAN entry in ieee8021QBridgeVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possib…	Unsigned32 Constraints: range: 0-0 range: 4096-4294967295	.1.3.111.2.802.1.1.4.1.4.4.1.2

A table containing per-port control and status
information for VLAN configuration in the device.

ieee8021QBridgePortVlanEntry row .1.3.111.2.802.1.1.4.1.4.5.1

Information controlling VLAN configuration for a port
on the device. This is indexed by ieee8021BridgeBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
ieee8021QBridgePvid The PVID, the VLAN-ID assigned to untagged frames or Priority-tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.	IEEE8021-TC-MIBIEEE8021VlanIndexr/w Type Constraints: range: 1..4094 range: 4096..4294967295	.1.3.111.2.802.1.1.4.1.4.5.1.1
ieee8021QBridgePortAcceptableFrameTypes When this is admitTagged(3), the device will discard untagged frames or Priority-tagged frames received on this port. When admitAll(1), untagged frames or Priority-tagged frames received on this port will be accepted a…	IEEE8021-TC-MIBIEEE8021PortAcceptableFrameTypesr/w Type Values: 1 admitAll 2 admitUntaggedAndPriority 3 admitTagged	.1.3.111.2.802.1.1.4.1.4.5.1.2
ieee8021QBridgePortIngressFiltering When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not aff…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.4.1.4.5.1.3
ieee8021QBridgePortMvrpEnabledStatus The state of MVRP operation on this port. The value true(1) indicates that MVRP is enabled on this port, as long as ieee8021QBridgeMvrpEnabledStatus is also enabled for this device. When false(2) but ieee8021QBridgeMv…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.4.1.4.5.1.4
ieee8021QBridgePortMvrpFailedRegistrations The total number of failed MVRP registrations, for any reason, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indi…	failed MVRP registrationsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.1.1.4.1.4.5.1.5
ieee8021QBridgePortMvrpLastPduOrigin The Source MAC Address of the last MVRP message received on this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.111.2.802.1.1.4.1.4.5.1.6
ieee8021QBridgePortRestrictedVlanRegistration The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN conc…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.4.1.4.5.1.7

A table containing per-port, per-VLAN statistics for
traffic received.

ieee8021QBridgePortVlanStatisticsEntry row .1.3.111.2.802.1.1.4.1.4.6.1

Traffic statistics for a VLAN on an interface.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021QBridgeVlanIndex

Column	Syntax	OID
ieee8021QBridgeTpVlanPortInFrames The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol be…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.1.1.4.1.4.6.1.1
ieee8021QBridgeTpVlanPortOutFrames The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes Bridge management frames originated by this device that are classified as belonging to t…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.1.1.4.1.4.6.1.2
ieee8021QBridgeTpVlanPortInDiscards The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard In…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.111.2.802.1.1.4.1.4.6.1.3

A table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification.
          
Entries in this table must be persistent over power
up restart/reboot.

ieee8021QBridgeProtocolGroupEntry row .1.3.111.2.802.1.1.4.1.5.1.1

A mapping from a Protocol Template to a Protocol
Group Identifier.

Indexes

ieee8021QBridgeProtocolGroupComponentId ieee8021QBridgeProtocolTemplateFrameType ieee8021QBridgeProtocolTemplateProtocolValue

Column	Syntax	OID
ieee8021QBridgeProtocolGroupComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.4.1.5.1.1.1
ieee8021QBridgeProtocolTemplateFrameType The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.	Enumeration Enumerated Values: 1 ethernet 2 rfc1042 3 snap8021H 4 snapOther 5 llcOther	.1.3.111.2.802.1.1.4.1.5.1.1.2
ieee8021QBridgeProtocolTemplateProtocolValue The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'sn…	OctetString Constraints: range: 2-2 range: 5-5	.1.3.111.2.802.1.1.4.1.5.1.1.3
ieee8021QBridgeProtocolGroupId Represents a group of protocols that are associated together when assigning a VID to a frame.	Integer32r/w Constraints: range: 0-2147483647	.1.3.111.2.802.1.1.4.1.5.1.1.4
ieee8021QBridgeProtocolGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.5.1.1.5

A table that contains VID sets used for
Port-and-Protocol-based VLAN Classification.

ieee8021QBridgeProtocolPortEntry row .1.3.111.2.802.1.1.4.1.5.2.1

A VID set for a port.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021QBridgeProtocolPortGroupId

Column	Syntax	OID
ieee8021QBridgeProtocolPortGroupId Designates a group of protocols in the Protocol Group Database.	Integer32 Constraints: range: 1-2147483647	.1.3.111.2.802.1.1.4.1.5.2.1.1
ieee8021QBridgeProtocolPortGroupVid The VID associated with a group of protocols for each port.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.5.2.1.2
ieee8021QBridgeProtocolPortRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.5.2.1.3

This table is used to configure the VID Translation
Table defined in 12.10.1.8 and 6.9.  The Bridge VID
Translation Table is used to implement a mapping between a
local VID, and a relay VID, used by the filtering and
forwarding process.  Each row in this table is indexed by
component, port, and local VID value and a value to be used
for the specified VID as specified in (6.9).  Entries in
this table must be persistent over power up restart/reboot.

ieee8021QBridgeVIDXEntry row .1.3.111.2.802.1.1.4.1.6.1.1

An entry for the S-VID translation table which includes
both the Local and Relay S-VIDs.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021QBridgeVIDXLocalVid

Column	Syntax	OID
ieee8021QBridgeVIDXLocalVid The Local VID after translation received at the ISS or EISS.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.6.1.1.1
ieee8021QBridgeVIDXRelayVid The Relay VID received before translation received at ISS or EISS.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.6.1.1.2
ieee8021QBridgeVIDXRowStatus This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.6.1.1.3

This table is used to configure the VID Translation
Table defined in 12.10.1.9 and 6.9.  The Bridge VID
Egress Translation Table is used to implement a mapping between a
relay VID, and a local VID, used by the filtering and
forwarding process.  Each row in this table is indexed by
component, port, and relay VID value and a value to be used
for the specified local VID as specified in (6.9).  Entries in
this table must be persistent over power up restart/reboot.

ieee8021QBridgeEgressVidXV2Entry row .1.3.111.2.802.1.1.4.1.6.3.1

An entry for the Egress VID translation table which includes
both the relay and local IDs between which the PNP or CNP
translates.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021QBridgeEgressVidXV2RelayVid

Column	Syntax	OID
ieee8021QBridgeEgressVidXV2RelayVid The Relay VID after translation transmitted to the ISS or EISS.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.6.3.1.1
ieee8021QBridgeEgressVidXV2LocalVid The Local VID before translation transmitted to the ISS or EISS.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.4.1.6.3.1.2
ieee8021QBridgeEgressVidXV2RowStatus This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.4.1.6.3.1.3