IEEE8021-Preemption-MIB

        The Bridge MIB module for managing devices that support
the frame preemption enhancements
for IEEE 802.1Q Bridges.
        
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
        
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
    
Source file
IEEE8021-Preemption-MIB
Last revised
Identity
ieee8021PreemptionMib
Base OID
1.3.111.2.802.1.1.29
Imported Objects
IEEE8021-BRIDGE-MIB ieee8021BridgeBaseComponentId ieee8021BridgeBasePort
IEEE8021-TC-MIB IEEE8021PriorityValue ieee802dot1mibs
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-Preemption-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-Preemption-MIB::ieee8021PreemptionMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-Preemption-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-Preemption-MIB::ieee8021PreemptionMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (17)
.1.3.111.2.802.1.1.29
.1.3.111.2.802.1.1.29.0
.1.3.111.2.802.1.1.29.1
.1.3.111.2.802.1.1.29.1.1
.1.3.111.2.802.1.1.29.1.1.1
.1.3.111.2.802.1.1.29.1.1.1.1
.1.3.111.2.802.1.1.29.1.1.1.1.1
Enumeration
.1.3.111.2.802.1.1.29.1.1.1.1.2
.1.3.111.2.802.1.1.29.1.1.2
.1.3.111.2.802.1.1.29.1.1.2.1
.1.3.111.2.802.1.1.29.1.1.2.1.1
.1.3.111.2.802.1.1.29.1.1.2.1.2
Enumeration
.1.3.111.2.802.1.1.29.1.1.2.1.3
Enumeration
.1.3.111.2.802.1.1.29.1.1.2.1.4
.1.3.111.2.802.1.1.29.2
.1.3.111.2.802.1.1.29.2.1
.1.3.111.2.802.1.1.29.2.2
Dependencies (9) 4 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.111.2.802.1.1.29.2.1.1
The compliance statement for devices supporting
frame preemption.

Support of the objects defined in this MIB module
also requires support of the IEEE8021-BRIDGE-MIB; the
provisions of 17.3.2 apply to implementations claiming
support of this MIB.
Required groups