IDS-MIB Table View

Table containing the parameters that are needed to detect intrusions

rsIDStrackingEntry row .1.3.6.1.4.1.89.35.1.65.1.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSFilterGroupName The Name for the filter/group must be unique. that name should be the same as the name of the appropriate filter/group	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.1.1.1
rsIDSTrackingTime This variable indicates the time interval, in miliseconds, to track a detection	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.1.1.2
rsIDSThreshold This variable indicates the threshold	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.1.1.3
rsIDSFilterGroupType This variable indicates the object type- whether it is a filter or group	Enumerationr/w Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.1.1.4
rsIDSTrackingType This variable indicates how to count	Enumerationr/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.1.1.5
rsIDSStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.1.1.6
rsIDSReportMode This variable indicates the attack report mode	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.1.1.7
rsIDSPacketReport This variable indicates the per-attack packet report	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.1.1.8
rsIDSRisk This variable indicates the risk of the attack	Enumerationr/w Constraints: range: 1-64	.1.3.6.1.4.1.89.35.1.65.1.1.9

Table containing the intrusion detection statistics

rsIDSStatsEntry row .1.3.6.1.4.1.89.35.1.65.29.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSAttackIndex The index of the attack that was detected	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.89.35.1.65.29.1.1
rsIDSAttackName The Name for the attack	OctetString Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.29.1.2
rsIDSAttackSrcAddr The src address of the attack	RFC1155-SMIIpAddress Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.29.1.3
rsIDSAttackDstAddr The dest address of the attack	RFC1155-SMIIpAddress Enumerated Values: 1 active 2 inactive Type Constraints: range: 4	.1.3.6.1.4.1.89.35.1.65.29.1.4
rsIDSAttackStatus The status of the attack(started/terminated/occured...)	Enumeration	.1.3.6.1.4.1.89.35.1.65.29.1.5
rsIDSAttacktime The time of the attack	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.29.1.6
rsIDSStatsStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 0 report 1 block	.1.3.6.1.4.1.89.35.1.65.29.1.7
rsIDSStatsContext The context of the attack	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.29.1.8
rsIDSStatsSrcPort The src address of the attack	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.9
rsIDSStatsDstPort The dst address of the attack	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.10
rsIDSStatsProtocol The protocol of the attack	Enumeration Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.11
rsIDSStatsPhyPort The phy address of the attack	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.12
rsIDSStatsRID The Radware ID of the attack	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.13
rsIDSStatsService The Service/Category related to the event	Enumeration Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.14
rsIDSPolicyName The Name for the policy	OctetString Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.15
rsIDSStatsPktCount The # of packets that match the attack filter	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.16
rsIDSStatsByteCount The # of packets that match the attack filter	Integer32 Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.29.1.17
rsIDSStatsReportMode This variable indicates the action performed on the attack	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.29.1.18
rsIDSStatsRisk This variable indicates the risk of the attack	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.29.1.19

TempTable containing the temp parameters that are needed to detect
intrusions

rsIDSSLTtrackingEntry row .1.3.6.1.4.1.89.35.1.65.38.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSSLTFilterGroupName The Name for the filter/group must be unique. that name should be the same as the name of the appropriate filter/group	OctetString Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.38.1.1
rsIDSSLTAlertThreshold This variable indicates the attack alerting threshold	Integer32r/w Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.38.1.2
rsIDSSLTActiveThreshold This variable indicates the activating threshold	Integer32r/w Enumerated Values: 0 instance0 1 instance1 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.38.1.3
rsIDSSLTDropThreshold This variable indicates the dropping threshold	Integer32r/w Constraints: range: 0-64000	.1.3.6.1.4.1.89.35.1.65.38.1.4
rsIDSSLTTermAlertThreshold This variable indicates the termination alert threshold	Integer32r/w Constraints: range: 0-29	.1.3.6.1.4.1.89.35.1.65.38.1.5
rsIDSSLTTermThreshold This variable indicates the termination threshold	Integer32r/w Enumerated Values: 0 disabled 1 http200ok 2 http200ok-rst-dst 3 http403 4 http403-rst-dst Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.38.1.6
rsIDSSLTAgingPeriod This variable indicates the the number of periods before an attack is removed	Integer32r/w Enumerated Values: 1 enable 2 disable Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.38.1.7
rsIDSSLTObjectID This variable indicates the the index of the object in the temp tracking table	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.38.1.8
rsIDSSLTAttackState This variable indicates the attack state	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.38.1.9
rsIDSSLTMsg The alert that pops up in the terminal when there is an attack	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.38.1.10
rsIDSSLTStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.38.1.11
rsIDSSLTReportMode This variable indicates the dos attack report mode	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.38.1.12
rsIDSSLTRisk This variable indicates the risk of the dos attack	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.38.1.13

The table containing the actual parameters that are needed to detect
intrusions

rsIDSSLTACTtrackingEntry row .1.3.6.1.4.1.89.35.1.65.39.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSSLTACTFilterGroupName The Name for the filter/group must be unique. that name should be the same as the name of the appropriate filter/group	OctetString	.1.3.6.1.4.1.89.35.1.65.39.1.1
rsIDSSLTACTAlertThreshold This variable indicates the attack alerting threshold	Integer32 Enumerated Values: 1 started 2 terminated 3 occur 6 sampled 11 occured 16 ongoing Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.2
rsIDSSLTACTActiveThreshold This variable indicates the activating threshold	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.89.35.1.65.39.1.3
rsIDSSLTACTDropThreshold This variable indicates the dropping threshold	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.4
rsIDSSLTACTTermAlertThreshold This variable indicates the termination alert threshold	Integer32 Enumerated Values: 1 regular 2 ssl 3 passive-ssl Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.5
rsIDSSLTACTTermThreshold This variable indicates the termination threshold	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.6
rsIDSSLTACTAgingPeriod This variable indicates the the number of periods before an attack is removed	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.7
rsIDSSLTACTObjectID This variable indicates the the index of the object in the act tracking table	Integer32 Enumerated Values: 1 ip 2 tcp 3 udp 4 icmp 5 nonip 6 sctp 7 icmpv6 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.39.1.8
rsIDSSLTACTAttackState This variable indicates the attack state	Enumeration	.1.3.6.1.4.1.89.35.1.65.39.1.9
rsIDSSLTACTMsg The alert that pops up in the terminal when there is an attack	OctetString	.1.3.6.1.4.1.89.35.1.65.39.1.10
rsIDSSLTACTStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 1 unassigned 2 intrusion 3 dos 4 anomalies 5 scanning 6 behavioral-doS 7 syn-flood 8 access 9 http-flood 10 server-protection 11 acl 12 session-table-protection 13 bwm 14 dns-protection 15 traffic-filters	.1.3.6.1.4.1.89.35.1.65.39.1.11
rsIDSSLTACTReportMode This variable indicates the dos act attack report mode	Enumerationr/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.39.1.12
rsIDSSLTACTRisk This variable indicates the risk of the dos act attack	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.39.1.13

The table containing the SLT params

rsIDSSLTNCPFEntry row .1.3.6.1.4.1.89.35.1.65.40.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSSLTNCPFObjectID This variable indicates attack's object id	Integer32 Enumerated Values: 1 info 2 low 3 medium 4 high Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.40.1.1
rsIDSSLTNCPFRuleName The name of the policy which caught the attack	OctetString	.1.3.6.1.4.1.89.35.1.65.40.1.2
rsIDSSLTNCPFSamplingCNT This variable indicates the sampling counter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.40.1.3
rsIDSSLTNCPFActiveCNT This variable indicates the active counter	Integer32 Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.40.1.4
rsIDSSLTNCPFAlertState This variable indicates the attack alerting state	Enumeration	.1.3.6.1.4.1.89.35.1.65.40.1.5
rsIDSSLTNCPFAttackState This variable indicates the attack state	Enumeration	.1.3.6.1.4.1.89.35.1.65.40.1.6
rsIDSSLTNCPFTermAlertCNT This variable indicates the attack termination alert counter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.40.1.7
rsIDSSLTNCPFTermCNT This variable indicates the attack termination counter	Integer32 Enumerated Values: 1 unassigned 2 intrusions 3 dos 4 anomalies 5 anti-scanning Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.40.1.8
rsIDSSLTAttackTime The last time the attack took place	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.40.1.9
rsIDSSLTAttackDate The last date the attack took place	OctetString	.1.3.6.1.4.1.89.35.1.65.40.1.10
rsIDSSLTAttackTermTime The last time the attack terminated	OctetString	.1.3.6.1.4.1.89.35.1.65.40.1.11
rsIDSSLTAttackTermDate The last date the attack terminated	OctetString Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.40.1.12
rsIDSSLTNCPFStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Constraints: range: 1-29 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.40.1.13
rsIDSSLTAttackMsg The attack message	OctetString Enumerated Values: 2 intrusions 3 dos 4 anomalies 5 anti-scanning	.1.3.6.1.4.1.89.35.1.65.40.1.14
rsIDSSLTNCPFPeakCNT This variable indicates the peak counter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.40.1.15

Table containing the list of rules params for the ids

rsIDSRulesEntry row .1.3.6.1.4.1.89.35.1.65.47.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSRulesIndex This variable indicates the administrative index of a line it determines the order of the rules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.47.1.1
rsIDSRulesName The Name for the Rule.	OctetString	.1.3.6.1.4.1.89.35.1.65.47.1.2
rsIDSRulesSource The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.47.1.3
rsIDSRulesDestination The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.47.1.4
rsIDSRulesDirection This variable indicates the direction of the incoming packet.	Enumerationr/w Enumerated Values: 3 dos	.1.3.6.1.4.1.89.35.1.65.47.1.5
rsIDSRulesPortmask The mask of the ports, should be in the format of 1,2,3,2	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.47.1.6
rsIDSRulesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.47.1.7

Table containing the list of rules params for the ids

rsIDSNewRulesEntry row .1.3.6.1.4.1.89.35.1.65.52.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSNewRulesName The Name for the Rule.	OctetString	.1.3.6.1.4.1.89.35.1.65.52.1.1
rsIDSServiceName The Name for the Service.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.89.35.1.65.52.1.2
rsIDSNewRulesSource The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.52.1.3
rsIDSNewRulesDestination The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.52.1.4
rsIDSNewRulesDirection This variable indicates the direction of the incoming packet.	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.52.1.5
rsIDSNewRulesPortmask The Port Group	OctetStringr/w Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.52.1.6
rsIDSNewRulesState This variable indicates the state of the rule.	Enumerationr/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.52.1.7
rsIDSNewRulesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.52.1.8
rsIDSNewRulesVlanTagGroup The VLAN tag Group	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.52.1.9
rsIDSNewRulesAction This variable indicates the policy action	Enumerationr/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.52.1.10
rsIDSNewRulesPacketReportingStatus This variable indicates the packet reporting status for the policy rule	Enumerationr/w Enumerated Values: 0 report 1 block	.1.3.6.1.4.1.89.35.1.65.52.1.11
rsIDSNewRulesProfileAppsec Name for the signatures profile.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.52.1.12
rsIDSNewRulesProfileConlmt Name for the connection limiting profile.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.52.1.13
rsIDSNewRulesProfileStateful Name for the stateful inspection profile.	OctetStringr/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.52.1.14
rsIDSNewRulesProfileScanning Name for the anti scanning profile.	OctetStringr/w Enumerated Values: 1 ip 2 tcp 3 udp 4 icmp 5 nonIp 6 icmpv6	.1.3.6.1.4.1.89.35.1.65.52.1.15
rsIDSNewRulesProfileNetflood Name for the behavioral dos profile.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.52.1.16
rsIDSNewRulesProfileSynprotection Name for the syn protection profile.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.89.35.1.65.52.1.17
rsIDSNewRulesProfileServprotection Name for the server protection profile.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.89.35.1.65.52.1.18
rsIDSNewRulesProfilePPS Name for the PPS limiting profile.	OctetStringr/w Enumerated Values: 1 notApplicable 2 equal 3 notEqual 4 greaterThan 5 lessThan	.1.3.6.1.4.1.89.35.1.65.52.1.19
rsIDSNewRulesMPLSRDGroup Name for the MPLS RD group.	OctetStringr/w Enumerated Values: 1 oneByte 2 twoBytes 3 threeBytes 4 fourBytes 5 notApplicable	.1.3.6.1.4.1.89.35.1.65.52.1.20
rsIDSNewRulesPacketTraceStatus This variable indicates the packet trace status for the policy rule	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.52.1.21
rsIDSNewRulesPacketTraceEnforcement This variable indicates the packet trace enforcement status for the policy rule	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.89.35.1.65.52.1.22
rsIDSNewRulesPacketReportingEnforcement This variable indicates the packet reporting enforcement status for the policy rule	Enumerationr/w Enumerated Values: 1 notApplicable 3 text	.1.3.6.1.4.1.89.35.1.65.52.1.23
rsIDSNewRulesProfileDNS Name for the DNS protection profile.	OctetStringr/w Enumerated Values: 3 user 4 static	.1.3.6.1.4.1.89.35.1.65.52.1.24
rsIDSQuarantineStatusInPolicy Quarantine Configuration	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.52.1.25
rsIDSNewRulesProfileServiceDiscovery Name for the Service Discovery protection profile.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.52.1.26
rsIDSNewRulesInstanceId This variable indicates the Instance ID ascription for the policy	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.89.35.1.65.52.1.27
rsIDSNewRulesPriority This variable indicates the Policy Priority.	Integer32r/w Enumerated Values: 1 notApplicable 2 caseInsensitive 3 caseSensitive 4 hex	.1.3.6.1.4.1.89.35.1.65.52.1.28
rsIDSNewRulesProfileTrafficFilters Name for the Traffic Filters profile.	OctetStringr/w Enumerated Values: 1 notApplicable 2 caseInsensitive 3 caseSensitive 4 hex 5 international	.1.3.6.1.4.1.89.35.1.65.52.1.29
rsIDSNewRulesCdnAction This variable indicates the policy CDN action	Enumerationr/w Enumerated Values: 0 none 1 ipHeader 2 ipData 3 tcpData 5 ethernet 6 l4Header 7 ipv6Header	.1.3.6.1.4.1.89.35.1.65.52.1.30
rsIDSNewRulesCdnHandling This variable indicates the policy CDN handling status	Enumerationr/w Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.52.1.31

Table containing the parameters that are needed to detect intrusions

rsIDSStaticGroupEntry row .1.3.6.1.4.1.89.35.1.65.54.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSStaticGroupName The Name for the filter/group must be unique. that name should be the same as the name of the appropriate filter/group	OctetString Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.89.35.1.65.54.1.1

A table-like display containing security logfile entries

rsIDSLogEntry row .1.3.6.1.4.1.89.35.1.65.61.1

The row definition for the Security logfile.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSLogIndex The index of the attack that was detected	Integer32 Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.61.1.1
rsIDSLogAttackName The Name for the attack	OctetString	.1.3.6.1.4.1.89.35.1.65.61.1.2
rsIDSLogSrcAddr The src address of the attack	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.89.35.1.65.61.1.3
rsIDSLogDstAddr The dest address of the attack	IPV6-TCIpv6Address Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.4
rsIDSLogAttackStatus The status of the attack(started/terminated/occured...)	Enumeration Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.5
rsIDSLogtime The time of the attack	OctetString Enumerated Values: 3 user 4 static	.1.3.6.1.4.1.89.35.1.65.61.1.6
rsIDSLogStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.61.1.7
rsIDSLogContext The context of the attack	Enumeration	.1.3.6.1.4.1.89.35.1.65.61.1.8
rsIDSLogSrcPort The src address of the attack	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.9
rsIDSLogDstPort The dst address of the attack	Integer32 Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.10
rsIDSLogProtocol The protocol of the attack	Enumeration	.1.3.6.1.4.1.89.35.1.65.61.1.11
rsIDSLogPhyPort The phy address of the attack	Integer32 Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.12
rsIDSLogRID The Radware ID of the attack	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.13
rsIDSLogCategory The category related to the event	Enumeration Enumerated Values: 3 user 4 static	.1.3.6.1.4.1.89.35.1.65.61.1.14
rsIDSLogPolicyName The Name for the policy	OctetString	.1.3.6.1.4.1.89.35.1.65.61.1.15
rsIDSLogPktCount The # of packets that match the attack filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.16
rsIDSLogByteCount The # of packets that match the attack filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.17
rsIDSLogReportMode This variable indicates the action performed on the attack	Enumeration	.1.3.6.1.4.1.89.35.1.65.61.1.18
rsIDSLogRisk This variable indicates the risk of the attack	Enumeration Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.19
rsIDSLogVlanTag The vlan tag in the packet of the attack	Integer32 Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.61.1.20
rsIDSLogMPLSTag The MPLS tag in the packet of the attack	Integer32 Enumerated Values: 1 filter 2 advanced-filter Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.21
rsIDSLogMPLSRD The Name for the policy	OctetString	.1.3.6.1.4.1.89.35.1.65.61.1.22
rsIDSLogInstance The active Instance in the packet of the attack	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.61.1.24

Table group list and categories.

rsIDSGroupCategoryEntry row .1.3.6.1.4.1.89.35.1.65.63.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSGroupCategory The group category.	Enumeration	.1.3.6.1.4.1.89.35.1.65.63.1.1
rsIDSGroupCatName The name of the group.	OctetStringr/w Enumerated Values: 0 report-only 10 drop 12 rst-dst 18 http200ok 19 http200ok-rst-dst 20 http403 21 http403-rst-dst	.1.3.6.1.4.1.89.35.1.65.63.1.2

Table containing the list of rules params for the ids

rsIDSProfilesEntry row .1.3.6.1.4.1.89.35.1.65.66.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSProfilesName The Name for the Profile.	OctetString Enumerated Values: 1 info 2 low 3 medium 4 high	.1.3.6.1.4.1.89.35.1.65.66.1.1
rsIDSProfileServiceName The Name for the Service.	OctetString Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.66.1.2
rsIDSProfileCategory The profile category.	Enumerationr/w Enumerated Values: 0 inoutbound 1 inbound 2 outbound	.1.3.6.1.4.1.89.35.1.65.66.1.3
rsIDSProfilesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 0 none 1 sip 2 sipdip 3 sipdprt 4 sipdipdprt 5 sipdipsprtdprt	.1.3.6.1.4.1.89.35.1.65.66.1.4
rsIDSProfileServiceId The profile service ID. this field should not be visible to the user.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.66.1.5
rsIDSProfileType Denotes the type of the filter policy.	Enumeration	.1.3.6.1.4.1.89.35.1.65.66.1.6

Table containing the list of SLT rules params for the ids

rsIDSSLTProfilesEntry row .1.3.6.1.4.1.89.35.1.65.68.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSSLTProfilesName The Name for the Profile.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.68.1.1
rsIDSSLTProfileServiceName The Name for the Service.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.68.1.2
rsIDSSLTProfileCategory The profile category.	Enumerationr/w Enumerated Values: 1 appsec 2 doss	.1.3.6.1.4.1.89.35.1.65.68.1.3
rsIDSSLTProfilesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.68.1.4
rsIDSSLTProfileServiceId The profile service ID. this field should not be visible to the user.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.68.1.5
rsIDSSLTProfileType Denotes the type of the filter policy.	Enumeration	.1.3.6.1.4.1.89.35.1.65.68.1.6

Table containing the list of rules params for the ids

rsIDSSLTNewRulesEntry row .1.3.6.1.4.1.89.35.1.65.69.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSSLTNewRulesName The Name for the Rule.	OctetStringr/w Enumerated Values: 1 filter 2 advanced-filter	.1.3.6.1.4.1.89.35.1.65.69.1.1
rsIDSSLTServiceName The Name for the Service.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.69.1.2
rsIDSSLTNewRulesSource The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.69.1.3
rsIDSSLTNewRulesDestination The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.69.1.4
rsIDSSLTNewRulesDirection This variable indicates the direction of the incoming packet.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.69.1.5
rsIDSSLTNewRulesPortmask The Port Group	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.69.1.6
rsIDSSLTNewRulesState This variable indicates the state of the rule.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.69.1.7
rsIDSSLTNewRulesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Constraints: range: 0-30 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.69.1.8
rsIDSSLTNewRulesVlanTagGroup The VLAN tag Group	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.69.1.9
rsIDSSLTNewRulesAction This variable indicates the policy action	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.69.1.10

Table containing the filters.

rsIDSFilterEntry row .1.3.6.1.4.1.89.35.1.65.75.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSFilterName The name of the filter object.	OctetString Enumerated Values: 2 low 3 medium 4 high	.1.3.6.1.4.1.89.35.1.65.75.1.1
rsIDSFilterProtocol The protocol for the filter.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.75.1.2
rsIDSFilterOMPCOffset The offset of the OMPC data.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.75.1.3
rsIDSFilterOMPCMask The mask for the OMPC object.	OctetStringr/w Enumerated Values: 1 filter 2 advanced 3 group 4 dos-attack 5 as-attack	.1.3.6.1.4.1.89.35.1.65.75.1.4
rsIDSFilterOMPCPattern The pattern for the OMPC data.	OctetStringr/w Enumerated Values: 3 user 4 static 65536 all	.1.3.6.1.4.1.89.35.1.65.75.1.5
rsIDSFilterOMPCCondition The condition for the OMPC data check.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.75.1.6
rsIDSFilterOMPCLength The length of the OMPC.	Enumerationr/w Constraints: range: 0-30	.1.3.6.1.4.1.89.35.1.65.75.1.7
rsIDSFilterContentOffset The offset for the content.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.75.1.8
rsIDSFilterContent The content to be checked.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.75.1.9
rsIDSFilterContentType The type of content. In the case of URL only the url is checked. (No offset is used). In the case of text then the entire packet is checked. (will make use of the offset).	Enumerationr/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.75.1.10
rsIDSFilterType The type of object. This can be regular (user defined), static (defined by the application), ids (defined by the user for ids) or idsStatic (defined by the application for the ids).	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.75.1.11
rsIDSFilterStatus The status of the object.	RowStatusr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.75.1.12
rsIDSFilterContentEnd End of search data.	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.75.1.13
rsIDSFilterContentData The content data to be checked.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.75.1.14
rsIDSFilterContentCoding The type of content coding that is used.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.75.1.15
rsIDSFilterContentDataCoding The type of content coding that is used.	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high 4 veryhigh	.1.3.6.1.4.1.89.35.1.65.75.1.16
rsIDSFilterOMPCOffsetBase The base of filter OMPC offset.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.75.1.17
rsIDSFilterSourceAppPortGroup Source port group name.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.75.1.18
rsIDSFilterDestinationAppPortGroup Destination port group name.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.75.1.19
rsIDSFilterDistanceRange Distance.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.75.1.20
rsIDSFilterRegExpContent Flag that shows whether content is a regular expression	Enumerationr/w Enumerated Values: 0 report 1 block	.1.3.6.1.4.1.89.35.1.65.75.1.21
rsIDSFilterRegExpContentData Flag that shows whether content data is a regular expression	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.75.1.22
rsIDSFilterPacketSizeType The packet size type.	Enumerationr/w Enumerated Values: 1 any 2 disable 3 tcp 4 udp	.1.3.6.1.4.1.89.35.1.65.75.1.23
rsIDSFilterPacketSizeRange Packet Size Range.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.75.1.24

Table containing groups of filters.

rsIDSAdvancedFilterEntry row .1.3.6.1.4.1.89.35.1.65.76.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSAdvancedFilterEntryName The name of the group entry.	OctetString Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.76.1.1
rsIDSAdvancedFilterEntryBasicName The name of the filter entry in the group.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.76.1.2
rsIDSAdvancedFilterEntryType The type of object. This can be regular (user defined), static (defined by the application), ids (defined by the user for ids) or idsStatic (defined by the application for the ids).	Enumeration Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.76.1.3
rsIDSAdvancedFilterEntryStatus The status of the object.	RowStatusr/w Constraints: range: 0-80 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.76.1.4

Table containing the set of filters and group filters - used by
rule.

rsIDSGroupEntry row .1.3.6.1.4.1.89.35.1.65.77.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSGroupName The name of the filter policy.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.77.1.1
rsIDSGroupEntryID This variable indicates Attack entry id	Integer32 Enumerated Values: 0 report 1 block Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.77.1.2
rsIDSGroupEntryName The name of the filter entry. This can either be a group or a filter. The device will resolve the type - i.e. filter or group.	OctetStringr/w Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.77.1.3
rsIDSGroupID This variable indicates Group id	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.77.1.4
rsIDSGroupType Denotes the type of the filter polciy.	Enumeration	.1.3.6.1.4.1.89.35.1.65.77.1.5
rsIDSGroupStatus The status of the object.	RowStatusr/w Constraints: range: 1-29 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.77.1.6

Table containing the parameters that are needed to detect intrusions

rsIDSAsAttackEntry row .1.3.6.1.4.1.89.35.1.65.78.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSAsAttackId This variable indicates the object type- whether it is a filter or group	Integer32 Enumerated Values: 1 destination 2 source 3 any Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.78.1.1
rsIDSAsAttackName The Name for the attack must be unique.	OctetStringr/w Enumerated Values: 1 tcp 2 udp 3 any	.1.3.6.1.4.1.89.35.1.65.78.1.2
rsIDSAsAttackServiceName The Name for the filter must be unique.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.78.1.3
rsIDSAsAttackServiceType This variable indicates the object type- whether it is a filter or group	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.78.1.4
rsIDSAsAttackTrackingTime This variable indicates the time interval, in miliseconds, to track a detection	Integer32r/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.78.1.5
rsIDSAsAttackThreshold This variable indicates the threshold	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.78.1.6
rsIDSAsAttackTrackingType This variable indicates how to count	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.78.1.7
rsIDSAsAttackMsg The Name for the filter must be unique.	OctetString	.1.3.6.1.4.1.89.35.1.65.78.1.8
rsIDSAsAttackStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.78.1.9
rsIDSAsAttackReportMode This variable indicates the attack report mode	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.10
rsIDSAsAttackSourceType Denotes the type of the filter polciy.	Enumeration Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.11
rsIDSAsAttackPacketReport This variable indicates the per-attack packet report	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.12
rsIDSAsAttackRisk This variable indicates the risk of the attack	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.13
rsIDSAsAttackState This variable indicates whether the attack should be classified or not	Enumerationr/w Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.78.1.14
rsIDSAsAttackDirection This variable indicates the direction of the attack	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.15
rsIDSAsAttackSuspendAction This variable indicates the suspend action type of the attack	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.78.1.16
rsIDSAsAttackDropThreshold This variable indicates the drop threshold	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.78.1.17
rsIDSAsAttackTermThreshold This variable indicates the term threshold	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.78.1.18
rsIDSAsAttackExcludeSrcAddr The exclude src addr.	OctetStringr/w Enumerated Values: 0 report 1 block	.1.3.6.1.4.1.89.35.1.65.78.1.19
rsIDSAsAttackExcludeDestAddr The exclude dest addr.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.78.1.20
rsIDSAsAttackPacketTrace This variable indicates the per-attack packet trace	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.78.1.21
rsIDSAsAttackQuarantine This variable indicates if quarantine is relevant for the attack	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.78.1.22
rsIDSAsAttackAppType This variable indicates the application type of the attack	Enumerationr/w Constraints: range: 0-19	.1.3.6.1.4.1.89.35.1.65.78.1.23

Table containing the parameters that are needed to detect intrusions

rsIDSDosAttackEntry row .1.3.6.1.4.1.89.35.1.65.79.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSDosAttackId This variable indicates the object type- whether it is a filter or group	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.1
rsIDSDosAttackName The Name for the attack must be unique.	OctetStringr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.79.1.2
rsIDSDosAttackServiceName The Name for the filter must be unique.	OctetStringr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.79.1.3
rsIDSDosAttackServiceType This variable indicates the object type- whether it is a filter or group	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.79.1.4
rsIDSDosAttackAlertThreshold This variable indicates the attack alerting threshold	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.5
rsIDSDosAttackActiveThreshold This variable indicates the activating threshold	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.6
rsIDSDosAttackDropThreshold This variable indicates the dropping threshold	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.7
rsIDSDosAttackTermAlertThreshold This variable indicates the termination alert threshold	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.8
rsIDSDosAttackTermThreshold This variable indicates the termination threshold	Integer32r/w Enumerated Values: 1 active 2 inactive Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.79.1.9
rsIDSDosAttackAgingPeriod This variable indicates the the number of periods before an attack is removed	Integer32r/w Constraints: range: 1-1342177280	.1.3.6.1.4.1.89.35.1.65.79.1.10
rsIDSDosAttackMsg The Name for the filter must be unique.	OctetStringr/w Constraints: range: 1-1342177280	.1.3.6.1.4.1.89.35.1.65.79.1.11
rsIDSDosAttackPacketReport This variable indicates the per-attack packet report	Enumerationr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.79.1.12
rsIDSDosAttackStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Constraints: range: 0-100 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.79.1.13
rsIDSDosAttackReportMode This variable indicates the attack report mode	Enumerationr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.79.1.14
rsIDSDosAttackSourceType Denotes the type of the filter polciy.	Enumeration Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.79.1.15
rsIDSDosAttackRisk This variable indicates the risk of the attack	Enumerationr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.79.1.16

Table containing the available services.

rsIDSServiceEntry row .1.3.6.1.4.1.89.35.1.65.80.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSServiceTableType The specific table to access.	Enumeration Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.80.1.1
rsIDSServiceType The type of entry.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.89.35.1.65.80.1.2
rsIDSServiceID Attack ID.	Integer32 Enumerated Values: 1 notApplied 2 weak 3 middle 4 strong Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.35.1.65.80.1.3
rsIDSServiceEntName The filter or advanced or group or attack name (of type rsIDSServiceType).	OctetString Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.80.1.4

Table containing the list of scanning profiles

rsIDSScanningProfilesEntry row .1.3.6.1.4.1.89.35.1.65.100.2.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSScanningProfilesName The Name for the Profile.	OctetString Constraints: range: 1-60	.1.3.6.1.4.1.89.35.1.65.100.2.1.1
rsIDSScanningProfilesTCPState Scanning profile TCP state.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.89.35.1.65.100.2.1.2
rsIDSScanningProfilesUDPState Scanning profile UDP state.	Enumerationr/w Constraints: range: 5-60	.1.3.6.1.4.1.89.35.1.65.100.2.1.3
rsIDSScanningProfilesICMPState Scanning profile ICMP state.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.89.35.1.65.100.2.1.4
rsIDSScanningProfilesStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.100.2.1.5
rsIDSScanningProfilesTypedeprecated Scanning profile type.	RowStatus Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.100.2.1.6
rsIDSScanningProfilesSensitivity Scanning profile sensitivity.	Enumerationr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.35.1.65.100.2.1.7
rsIDSScanningProfilesAccuracyLevel Scanning profile accuracy level.	RowStatusr/w Constraints: range: 0-100 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.100.2.1.8
rsIDSScanningProfilesSinglePort Scanning profile single probed port test.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.100.2.1.9
rsIDSScanningProfilesPacketTraceStatus Scanning profile packet report status	Enumerationr/w Constraints: range: 10-10080	.1.3.6.1.4.1.89.35.1.65.100.2.1.10
rsIDSScanningProfilesHighPortsResp Scanning profile high port response	Enumerationr/w Constraints: range: 2-50	.1.3.6.1.4.1.89.35.1.65.100.2.1.11
rsIDSScanningProfilesAction Scanning profile action	Enumerationr/w Constraints: range: 1-336	.1.3.6.1.4.1.89.35.1.65.100.2.1.12
rsIDSScanningProfilesFootprintStrictness Scanning profile footprint strictness	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.35.1.65.100.2.1.13
rsIDSScanningProfilesLowToHighBypass Bypass connections originating from System Ports to Non-System Ports	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.2.1.14

Table containing the list of scanning policies

rsIDSScanningPolicyEntry row .1.3.6.1.4.1.89.35.1.65.100.3.1

The row definition for this table.

Indexes

rsNetFloodQuotaWay

Column	Syntax	OID
rsIDSScanningPolicyName The Name for the Rule.	OctetString Enumerated Values: 0 inbound 1 outbound	.1.3.6.1.4.1.89.35.1.65.100.3.1.1
rsIDSScanningPolicyServiceName The Name for the Service.	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.3.1.2
rsIDSScanningPolicyInternal The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.3.1.3
rsIDSScanningPolicyExternal The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.3.1.4
rsIDSScanningPolicyPortmask The Port Group	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.3.1.5
rsIDSScanningPolicyState This variable indicates the state of the rule.	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.89.35.1.65.100.3.1.6
rsIDSScanningPolicyStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.100.3.1.7
rsIDSScanningPolicyVlanTagGroup The VLAN tag Group	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.100.3.1.8
rsIDSScanningPolicyAction This variable indicates the policy action	Enumerationr/w Enumerated Values: 1 sequence-num 2 id-num 7 source-port 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 13 destination-port 14 destination-ip 15 fragment 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.100.3.1.9
rsIDSScanningPolicyDirection This variable indicates the direction of the incoming packet.	Enumerationr/w Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.100.3.1.10

Table containing the trusted ports for scanning profiles

rsIDSScanningTrustedPorts row .1.3.6.1.4.1.89.35.1.65.100.11.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSScanningTrustedPortsProfileName Profile To be bypassed in the Scanning module	OctetString	.1.3.6.1.4.1.89.35.1.65.100.11.1.1
rsIDSScanningTrustedPortsPort Port To be bypassed for the scanning profile	Integer32 Enumerated Values: 1 sequence-num 2 id-num 7 source-port 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 13 destination-port 14 destination-ip 15 fragment 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.100.11.1.2
rsIDSScanningTrustedPortsStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.100.11.1.3
rsIDSScanningTrustedPortsDirection L4 port type - Source or Destination	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.100.11.1.4
rsIDSScanningTrustedPortsProtocol L4 protocol	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.100.11.1.5

Table containing the trusted Source IPs for scanning profiles

rsIDSScanningTrustedSourceIPs row .1.3.6.1.4.1.89.35.1.65.100.12.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsIDSScanningTrustedSourceIPsProfileName Profile To be bypassed in the Scanning module	OctetString Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.100.12.1.1
rsIDSScanningTrustedSourceIPsIP Source IP To be bypassed for the scanning profile	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.89.35.1.65.100.12.1.2
rsIDSScanningTrustedSourceIPsStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.100.12.1.3

Table containing the list of policies params for the NetFlood inspection

rsNetFloodPolicyEntry row .1.3.6.1.4.1.89.35.1.65.101.1.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsNetFloodPolicyName The Name for the NetFlood inspection Policy.	OctetString Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.101.1.1.1
rsNetFloodPolicyProfileName The Name of the NetFlood inspection Profile.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.101.1.1.2
rsNetFloodPolicySourceNet The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.101.1.1.3
rsNetFloodPolicyDestinationNet The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address.	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.101.1.1.4
rsNetFloodPolicyDirection This variable indicates the direction of the incoming packet.	Enumerationr/w Enumerated Values: 0 checksum 2 id-num 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 14 destination-ip 15 fragment 19 igmp-message-type 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.101.1.1.5
rsNetFloodPolicyPhysicalPortGroup The Port Group	OctetStringr/w Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.101.1.1.6
rsNetFloodPolicyOperationalStatus This variable indicates the operational status of the policy.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.1.1.7
rsNetFloodPolicyStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.101.1.1.8
rsNetFloodPolicyVlanTagGroup The Port Group	OctetStringr/w	.1.3.6.1.4.1.89.35.1.65.101.1.1.9
rsNetFloodPolicyAction This variable indicates the policy action	Enumerationr/w Enumerated Values: 1 sequence-num 2 id-num 7 source-port 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 13 destination-port 14 destination-ip 15 fragment 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.101.1.1.10
rsNetFloodPolicyPacketReportingStatus This variable indicates the packet reporting status for the policy rule	Enumerationr/w Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.101.1.1.11

Table containing the list of profiles params for the NetFlood inspection

rsNetFloodProfileEntry row .1.3.6.1.4.1.89.35.1.65.101.2.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rsNetFloodProfileName The Name for the Profile.	OctetString	.1.3.6.1.4.1.89.35.1.65.101.2.1.1
rsNetFloodProfileTcpStatus This variable indicates whether to check tcp protocol in this policy.	Enumerationr/w Enumerated Values: 0 udp-in 2 icmp-in 4 igmp-in 6 tcp-syn-in 8 tcp-rst-in 10 tcp-ack-in 12 tcp-ack-psh-in 14 tcp-ack-fin-in 16 tcp-syn-ack-in 18 tcp-frag-in 20 udp-frag-in	.1.3.6.1.4.1.89.35.1.65.101.2.1.2
rsNetFloodProfileTcpSynStatus This variable indicates whether to check tcp protocol in this policy.	Enumerationr/w Enumerated Values: 0 checksum 1 sequence-num 2 id-num 3 dns-id-num 4 dns-qname 6 dns-qcount 7 source-port 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 13 destination-port 14 destination-ip 15 fragment 19 icmp-igmp-message-type 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 27 icmp-message-type-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.101.2.1.3
rsNetFloodProfileUdpStatus This variable indicates whether to check udp protocol in this policy.	Enumerationr/w Enumerated Values: 0 accept 1 bypass	.1.3.6.1.4.1.89.35.1.65.101.2.1.4
rsNetFloodProfileIgmpStatus This variable indicates whether to check igmp protocol in this policy.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.5
rsNetFloodProfileIcmpStatus This variable indicates whether to check icmp protocol in this policy.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.6
rsNetFloodProfileStatus This variable indicates the administrative status of this entry. Used to delete an entry of this table.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.89.35.1.65.101.2.1.7
rsNetFloodProfileTcpFinAckStatus This variable indicates whether to check tcp fin + ack in this policy.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.8
rsNetFloodProfileTcpRstStatus This variable indicates whether to check tcp reset in this policy.	Enumerationr/w Enumerated Values: 0 udp-in 2 icmp-in 4 igmp-in 6 tcp-syn-in 8 tcp-rst-in 14 tcp-ack-fin-in 16 tcp-syn-ack-in 18 tcp-frag-in	.1.3.6.1.4.1.89.35.1.65.101.2.1.9
rsNetFloodProfileTcpPshAckStatus This variable indicates whether to check tcp push + ack in this policy.	Enumerationr/w Enumerated Values: 0 checksum 1 sequence-num 2 id-num 3 dns-id-num 4 dns-qname 5 dns-subdomain 6 dns-qcount 7 source-port 8 source-ip 9 frag-offset 10 flow-label 11 tos 12 packet-size 13 destination-port 14 destination-ip 15 fragment 19 icmp-igmp-message-type 20 ttl 21 id-num-ipv6 22 frag-offset-ipv6 24 packet-size-ipv6 25 source-ip-ipv6 26 destination-ip-ipv6 27 icmp-message-type-ipv6 28 context-tag	.1.3.6.1.4.1.89.35.1.65.101.2.1.10
rsNetFloodProfileTcpSynAckStatus This variable indicates whether to check tcp syn + ack in this policy.	Enumerationr/w Enumerated Values: 0 no 1 yes	.1.3.6.1.4.1.89.35.1.65.101.2.1.11
rsNetFloodProfileTcpFragStatus This variable indicates whether to check tcp fragment in this policy.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.12
rsNetFloodProfileBandwidthIn network flood bandwidth inbound initial value (in Mgbit) for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.13
rsNetFloodProfileBandwidthOut network flood bandwidth outbound initial value (in Mgbit) for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.14
rsNetFloodProfileTcpInQuota Tcp quota inbound value for this policy.	Integer32r/w Enumerated Values: 0 udp-in 2 icmp-in 4 igmp-in 6 tcp-syn-in 8 tcp-rst-in 14 tcp-ack-fin-in 16 tcp-syn-ack-in 18 tcp-frag-in	.1.3.6.1.4.1.89.35.1.65.101.2.1.15
rsNetFloodProfileUdpInQuota Udp quota inbound value for this policy.	Integer32r/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.89.35.1.65.101.2.1.16
rsNetFloodProfileIcmpInQuota Icmp quota inbound value for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.17
rsNetFloodProfileIgmpInQuota Igmp quota inbound value for this policy.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.89.35.1.65.101.2.1.18
rsNetFloodProfileTcpOutQuota Tcp quota outbound value for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.19
rsNetFloodProfileUdpOutQuota Udp quota outbound value for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.20
rsNetFloodProfileIcmpOutQuota Icmp quota outbound value for this policy.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.21
rsNetFloodProfileIgmpOutQuota Igmp quota outbound value for this policy.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.89.35.1.65.101.2.1.22
rsNetFloodProfileTransparentOptimization Transparent Optimization process (Don't Blcok during closed feedback iteration)	Enumerationr/w Constraints: range: 1-15	.1.3.6.1.4.1.89.35.1.65.101.2.1.23
rsNetFloodProfileLevelOfReuglarzation Level Of Reuglarization	Enumerationr/w Constraints: range: 1-5	.1.3.6.1.4.1.89.35.1.65.101.2.1.24
rsNetFloodProfilePacketReportStatus packet report status	Enumerationr/w Constraints: range: 1-4	.1.3.6.1.4.1.89.35.1.65.101.2.1.25
rsNetFloodProfilePacketTraceStatus packet trace status	Enumerationr/w Constraints: range: 1-7	.1.3.6.1.4.1.89.35.1.65.101.2.1.26
rsNetFloodProfileAction The action of this profile	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.27
rsNetFloodProfileSimulationDuration The pre-defined duration of this simulation (minutes)	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.28
rsNetFloodProfileSimulationStopAtAttackEnd A flag indicating if the simulation will stop at the end of the attack or continue the pre-define duration	Enumerationr/w Constraints: range: 1-19	.1.3.6.1.4.1.89.35.1.65.101.2.1.29
rsNetFloodProfileSimulationStabilizationDuration The number of seconds after the signature is stable, before starting the simulation.	Integer32r/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.101.2.1.30
rsNetFloodProfileSimulationStartWhenSigChange A flag indicating if the simulation will restart if the signature changed (For BDoS only)	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.101.2.1.31
rsNetFloodProfileJointDistributionStatus A flag indicating if the joint distribution statistics will be reported (For BDoS only)	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.89.35.1.65.101.2.1.32
rsNetFloodProfileUdpFragStatus This variable indicates whether to check udp fragment in this policy.	Enumerationr/w Enumerated Values: 1 oneway 2 twoway	.1.3.6.1.4.1.89.35.1.65.101.2.1.33
rsNetFloodProfileUdpFragInQuota Inbound UDP Fragmentation Quota for this policy.	Integer32r/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.101.2.1.34
rsNetFloodProfileUdpFragOutQuota Outbound UDP Fragmentation Quota for this policy.	Integer32r/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.35.1.65.101.2.1.35
rsNetFloodProfileBurstEnabled Burst attack treatment status.	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.36
rsNetFloodProfileNoBurstTimeout The maximal interval, in minutes, between two consecutive traffic bursts, that is required in order to identify the attack as a burst-attack.	Integer32r/w Constraints: range: 0-80	.1.3.6.1.4.1.89.35.1.65.101.2.1.37
rsNetFloodProfileBurstAttackThreshold The number of consecutive bursts that causes DefensePro to identify the attack as a burst attack.	Integer32r/w Enumerated Values: 0 report 1 block	.1.3.6.1.4.1.89.35.1.65.101.2.1.38
rsNetFloodProfileBurstAttackPeriod Maximal lifespan of a burst attack after which DefensePro declares an end of the burst attack.	Integer32r/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.39
rsNetFloodProfileOverMitigationStatus This variable indicates whether to check for over blocking	Enumerationr/w	.1.3.6.1.4.1.89.35.1.65.101.2.1.40
rsNetFloodProfileOverMitigationThreshold This variable indicates over mitigation threshold	Integer32r/w Constraints: range: 1-29	.1.3.6.1.4.1.89.35.1.65.101.2.1.41