IBM6611-MIB Table View

The cylink Status table.  This table contains
information about the current state of the
Cylink CSUs attached to the system.

cylinkStatusEntry row .1.3.6.1.4.1.2.6.2.3.1.1.1

An entry in the cylink Status table.

Indexes

cylinkIndex

Column	Syntax	OID
cylinkIndexmandatory An index value that uniquely identifies a cylink system interface. The interface identified by a particular value of this index is the same interface as identified by the same value in an ifIndex object instance.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.3.1.1.1.1
cylinkLinkStatemandatory The current state of the link. The meanings of the values are: cylinkNotConnected(1) The link is not physically connected to the CSU. This may be due to loss of input circuit or loss of outp…	Enumeration Enumerated Values: 1 cylinkNotConnected 2 cylinkNoInput 3 cylinkNoOutput 4 cylinkConnected	.1.3.6.1.4.1.2.6.2.3.1.1.1.2
cylinkLoopbackmandatory The loopback mode of the link. The meaning of values are: cylinkNoLoopback(1) The link is not in loopback mode. cylinkNearEndLoopback(2) The link has been placed in loopback mode a…	Enumeration Enumerated Values: 1 cylinkNoLoopback 2 cylinkNearEndLoopback 3 cylinkFarEndLoopback	.1.3.6.1.4.1.2.6.2.3.1.1.1.3
cylinkQRSSmandatory The Quasi-Random Signal Sequence test mode of the CSU. The value of the meanings are: cylinkNoQRSS(1) The CSU is not in QRSS mode. cylinkQRSSMaster(2) The CSU is transmitting a QRS…	Enumeration Enumerated Values: 1 cylinkNoQRSS 2 cylinkQRSSMaster 3 cylinkQRSSSlave	.1.3.6.1.4.1.2.6.2.3.1.1.1.4

The cylink Configuration table.  This table contains
information about the configuration of the Cylink CSUs
attached to the system.

cylinkConfigEntry row .1.3.6.1.4.1.2.6.2.3.1.3.1

An entry in the cylink Configuration table.

Indexes

cylinkConfigIndex

Column	Syntax	OID
cylinkConfigIndexmandatory The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of this index is the same CSU as identified by the same value in a cylinkIndex object instanc…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.3.1.3.1.1
cylinkSerialNumbermandatory The manufacturer's serial number of this CSU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.3.1.3.1.2
cylinkSoftwareVersionmandatory The version number of the microcode running in the CSU.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.2.6.2.3.1.3.1.3
cylinkDTEFramingmandatory The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.	Enumeration Enumerated Values: 0 cylinkDTEFramingD4 1 cylinkDTEFramingESF	.1.3.6.1.4.1.2.6.2.3.1.3.1.4
cylinkNetworkFramingmandatory The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.	Enumeration Enumerated Values: 0 cylinkNetworkFramingD4 1 cylinkNetworkFramingESF	.1.3.6.1.4.1.2.6.2.3.1.3.1.5
cylinkDTEDS1Modemandatory The DTE DS-1 mode selected (B8ZS, or AMI).	Enumeration Enumerated Values: 0 cylinkDTEDS1ModeB8ZS 1 cylinkDTEDS1ModeAMI	.1.3.6.1.4.1.2.6.2.3.1.3.1.6
cylinkNetworkDS1Modemandatory The network DS-1 mode selected (B8ZS, or AMI).	Enumeration Enumerated Values: 0 cylinkNetworkDS1ModeB8ZS 1 cylinkNetworkDS1ModeAMI	.1.3.6.1.4.1.2.6.2.3.1.3.1.7
cylinkOnesResponsibilitymandatory The component selected for Ones Density Responsibility (DTE, or CSU.	Enumeration Enumerated Values: 0 cylinkOnesResponsibilityDTE 1 cylinkOnesResponsibilityACSU	.1.3.6.1.4.1.2.6.2.3.1.3.1.8
cylinkOnesControlmandatory The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL).	Enumeration Enumerated Values: 0 cylinkOnesControlLSB24 1 cylinkOnesControlD4FRM 2 cylinkOnesControlESFDL	.1.3.6.1.4.1.2.6.2.3.1.3.1.9
cylinkZeroProtectionmandatory The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the data stream before a one is forced.	Enumeration Enumerated Values: 0 cylinkZeroProtection80 1 cylinkZeroProtection15	.1.3.6.1.4.1.2.6.2.3.1.3.1.10
cylinkClockSourcemandatory The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).	Enumeration Enumerated Values: 0 cylinkClockSourceNetwork 1 cylinkClockSourceDTE 2 cylinkClockSourceExternal 3 cylinkClockSourceInternal	.1.3.6.1.4.1.2.6.2.3.1.3.1.11
cylinkClockFrequencymandatory The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz).	Enumeration Enumerated Values: 0 cylinkClockFreq-56kHz 1 cylinkClockFreq-256kHz 2 cylinkClockFreq-1-344MHz 3 cylinkClockFreq-1-544MHz	.1.3.6.1.4.1.2.6.2.3.1.3.1.12
cylinkClockBackupmandatory The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).	Enumeration Enumerated Values: 0 cylinkClockBackupNetwork 1 cylinkClockBackupDTE 2 cylinkClockBackupExternal 3 cylinkClockBackupInternal	.1.3.6.1.4.1.2.6.2.3.1.3.1.13
cylinkDIUFrequencymandatory The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps).	Enumeration Enumerated Values: 0 cylinkDIUFreq-768kbps 1 cylinkDIUFreq-1-344Mbps 2 cylinkDIUFreq-1-528Mbps 3 cylinkDIUFreq-1-536Mbps	.1.3.6.1.4.1.2.6.2.3.1.3.1.14
cylinkDIUTimingmandatory The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing).	Enumeration Enumerated Values: 0 cylinkDIUTimingTT 1 cylinkDIUTimingST	.1.3.6.1.4.1.2.6.2.3.1.3.1.15
cylinkDialoutCapabilitymandatory The DIU dial-out capability selected (polled, tone, or pulse).	Enumeration Enumerated Values: 0 cylinkDialoutCapabilityPolled 1 cylinkDialoutCapabilityTone 2 cylinkDialoutCapabilityPulse	.1.3.6.1.4.1.2.6.2.3.1.3.1.16
cylinkDialoutHoldoffmandatory The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions.	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.2.6.2.3.1.3.1.17
cylinkPrimaryPhonemandatory The primary telephone number used by by the CSU to contact the NMS.	OctetString Constraints: range: 0-19	.1.3.6.1.4.1.2.6.2.3.1.3.1.18
cylinkSecondaryPhonemandatory The secondary telephone number used by by the CSU to contact the NMS.	OctetString Constraints: range: 0-19	.1.3.6.1.4.1.2.6.2.3.1.3.1.19
cylinkAlarmRepeatTimemandatory The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions.	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.2.6.2.3.1.3.1.20
cylinkESThresholdmandatory The threshold, in seconds, for the errored second value in the current 15-minute interval.	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.2.6.2.3.1.3.1.21
cylinkSecondaryContactmandatory The state of the CSU secondary contact (open or closed).	Enumeration Enumerated Values: 0 cylinkSecondaryContactOpen 1 cylinkSecondaryContactClosed	.1.3.6.1.4.1.2.6.2.3.1.3.1.22

A table containing the	average	main processor
load over each minute for the last 60 minutes.

ibmMainProcessorLoadEntry row .1.3.6.1.4.1.2.6.2.4.1.1

An entry in the main processor load table.

Indexes

ibmMainProcessorLoadIndex

Column	Syntax	OID
ibmMainProcessorLoadIndexmandatory Indicates the number of minutes ago that this entry contains main processor load information for.	Integer32 Constraints: range: 1-60	.1.3.6.1.4.1.2.6.2.4.1.1.1
ibmMainProcessorLoadmandatory The main processor load averaged over one minute. The load is given as a percentage. For example, 25% is 25.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.4.1.1.2

A table containing software vital product data	information.

swVpdEntry row .1.3.6.1.4.1.2.6.2.4.2.1.1

An entry for a piece of software installed on this router.

Indexes

swvpdIndex

Column	Syntax	OID
swvpdIndexmandatory A unique value for each entry in this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.4.2.1.1.1
swvpdNamemandatory The name of this software product.		.1.3.6.1.4.1.2.6.2.4.2.1.1.2
swvpdPtfNamemandatory If this entry represents a PTF, this object contains the name of the PTF. Otherwise this object contains a string of zero length.		.1.3.6.1.4.1.2.6.2.4.2.1.1.3
swvpdVerIdmandatory The version identifier for this piece of software.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.4.2.1.1.4
swvpdRelIdmandatory The release identifier for this piece of software.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.4.2.1.1.5
swvpdModIdmandatory The modification level identifier for this piece of software.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.4.2.1.1.6
swvpdFixIdmandatory The fix level identifier for this piece of software.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.4.2.1.1.7
swvpdStatemandatory The state of the action in swvpdAction being performed on this software.	Enumeration Enumerated Values: 1 complete 2 pending 3 broken 4 cancelled 5 unknown	.1.3.6.1.4.1.2.6.2.4.2.1.1.8
swvpdActionmandatory The action being performed on this software.	Enumeration Enumerated Values: 1 apply 2 commit 3 reject 4 decommit 5 cleanup 6 unknown	.1.3.6.1.4.1.2.6.2.4.2.1.1.9
swvpdPathmandatory An indication of which part of the system this software is installed on. The values correspond to the following paths: root(1) /etc/objrepos usr(2) /usr/lib/objrepos share(3) /usr/share/lib/ob…	Enumeration Enumerated Values: 1 root 2 usr 3 share	.1.3.6.1.4.1.2.6.2.4.2.1.1.10
swvpdDateTimemandatory A string indicating the date and time that the action in swvpdAction was performed on this software.		.1.3.6.1.4.1.2.6.2.4.2.1.1.11

Table of MAC address filtering information.

ibmmacAddrFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.1.1.1

MAC address filtering information for a single interface.

Indexes

ibmmacAddrFilterType ibmmacAddrFilterIfIndex

Column	Syntax	OID
ibmmacAddrFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.1.1.1.1
ibmmacAddrFilterInBcastTypemandatory For the incoming MAC address filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.1.1.1.2
ibmmacAddrFilterOutBcastTypemandatory For the outgoing MAC address filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.1.1.1.3
ibmmacAddrFilterInFilterTypemandatory For the incoming filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.1.1.1.4
ibmmacAddrFilterOutFilterTypemandatory For the outgoing filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.1.1.1.5
ibmmacAddrFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.1.1.1.6
ibmmacAddrFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.1.1.1.7
ibmmacAddrFilterTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.1.1.1.8

Table of MAC address filtering information
for incoming frames.

ibmmacAddrFilterInEntry row .1.3.6.1.4.1.2.6.2.7.1.2.1

Filtering information for incoming frames.

Indexes

ibmmacAddrFilterInType ibmmacAddrFilterInIfIndex ibmmacAddrFilterInSrcAddress ibmmacAddrFilterInDestAddress

Column	Syntax	OID
ibmmacAddrFilterInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.1.2.1.1
ibmmacAddrFilterInSrcAddressmandatory MAC source address to be filtered.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.2.1.2
ibmmacAddrFilterInSrcMaskmandatory Mask to allow ibmmacAddrFilterInSrcAddress to be used as a range of values.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.2.1.3
ibmmacAddrFilterInDestAddressmandatory MAC destination address to be filtered.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.2.1.4
ibmmacAddrFilterInDestMaskmandatory Mask to allow ibmmacAddrFilterInDestAddress to be used as a range of values.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.2.1.5
ibmmacAddrFilterInTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.1.2.1.6

Table of MAC address filtering information
for outgoing frames.

ibmmacAddrFilterOutEntry row .1.3.6.1.4.1.2.6.2.7.1.3.1

Filtering information for outgoing frames.

Indexes

ibmmacAddrFilterOutType ibmmacAddrFilterOutIfIndex ibmmacAddrFilterOutSrcAddress ibmmacAddrFilterOutDestAddress

Column	Syntax	OID
ibmmacAddrFilterOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.1.3.1.1
ibmmacAddrFilterOutSrcAddressmandatory MAC source address to be filtered.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.3.1.2
ibmmacAddrFilterOutSrcMaskmandatory Mask to allow ibmmacAddrFilterOutSrcAddress to be used as a range of values.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.3.1.3
ibmmacAddrFilterOutDestAddressmandatory MAC destination address to be filtered.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.3.1.4
ibmmacAddrFilterOutDestMaskmandatory Mask to allow ibmmacAddrFilterOutDestAddress to be used as a range of values.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.7.1.3.1.5
ibmmacAddrFilterOutTypemandatory Type type of entry either sr or tb	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.1.3.1.6

Table of SAP filtering information.

ibmsapFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.2.1.1

SAP filtering information for a single interface.

Indexes

ibmsapFilterType ibmsapFilterIfIndex

Column	Syntax	OID
ibmsapFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.2.1.1.1
ibmsapFilterInBcastTypemandatory For the incoming SAP filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.2.1.1.2
ibmsapFilterOutBcastTypemandatory For the outgoing SAP filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.2.1.1.3
ibmsapFilterInmandatory A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2.6.2.7.2.1.1.4
ibmsapFilterOutmandatory A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2.6.2.7.2.1.1.5
ibmsapFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.2.1.1.6
ibmsapFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.2.1.1.7
ibmsapFilterTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.2.1.1.8

Table of SNAP filtering information.   Note that
SNAP filtering only comes into play if packets with
source SAP 0xAA are being forwarded.

ibmsnapFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.3.1.1

SNAP filtering information for a single interface.

Indexes

ibmsnapFilterType ibmsnapFilterIfIndex

Column	Syntax	OID
ibmsnapFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.1.1.1
ibmsnapFilterInFilterTypemandatory For the incoming SNAP filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.3.1.1.2
ibmsnapFilterOutFilterTypemandatory For the outgoing SNAP filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.3.1.1.3
ibmsnapFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.3.1.1.4
ibmsnapFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.3.1.1.5
ibmsnapFilterTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.3.1.1.6

Table of SNAP type filtering information
for incoming frames.  Note that the entries in
this table only come into play if packets with
source SAP 0xAA are being forwarded.

ibmsnapFilterInEntry row .1.3.6.1.4.1.2.6.2.7.3.2.1

Filtering information for a single SNAP value on a
single interface.

Indexes

ibmsnapFilterInType ibmsnapFilterInIfIndex ibmsnapFilterInValue

Column	Syntax	OID
ibmsnapFilterInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.2.1.1
ibmsnapFilterInValuemandatory Indicates which SNAP value to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.2.1.2
ibmsnapFilterInMaskmandatory Mask to allow ibmsnapFilterInValue to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.2.1.3
ibmsnapFilterInTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.3.2.1.4

Table of SNAP filtering information
for outgoing frames.  Note that the entries in
this table only come into play if packets with
source SAP 0xAA are being forwarded.

ibmsnapFilterOutEntry row .1.3.6.1.4.1.2.6.2.7.3.3.1

Filtering information for a single SNAP value on a
single interface.

Indexes

ibmsnapFilterOutType ibmsnapFilterOutIfIndex ibmsnapFilterOutValue

Column	Syntax	OID
ibmsnapFilterOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.3.1.1
ibmsnapFilterOutValuemandatory Indicates which SNAP values to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.3.1.2
ibmsnapFilterOutMaskmandatory Mask to allow ibmsnapFilterOutValue to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.3.3.1.3
ibmsnapFilterOutTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.3.3.1.4

Table of ring filtering information.

ibmringFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.4.1.1

Ring filtering information for a single interface.

Indexes

ibmringFilterIfIndex

Column	Syntax	OID
ibmringFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.1.1.1
ibmringFilterInBcastTypemandatory For the incoming ring filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.4.1.1.2
ibmringFilterOutBcastTypemandatory For the outgoing ring filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.4.1.1.3
ibmringFilterInFilterTypemandatory For the incoming ring filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.4.1.1.4
ibmringFilterOutFilterTypemandatory For the outgoing ring filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.4.1.1.5
ibmringFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.4.1.1.6
ibmringFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.4.1.1.7

Table of ring number filtering information
for incoming frames.

ibmringFilterInEntry row .1.3.6.1.4.1.2.6.2.7.4.2.1

Filtering information for a single ring number
on a single interface.

Indexes

ibmringFilterInIfIndex ibmringFilterInNumber

Column	Syntax	OID
ibmringFilterInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.2.1.1
ibmringFilterInNumbermandatory Indicates which ring number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.2.1.2
ibmringFilterInMaskmandatory Mask to allow ibmringFilterInNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.2.1.3

Table of ring number filtering information
for outgoing frames.

ibmringFilterOutEntry row .1.3.6.1.4.1.2.6.2.7.4.3.1

Filtering information for a single ring number
on a single interface.

Indexes

ibmringFilterOutIfIndex ibmringFilterOutNumber

Column	Syntax	OID
ibmringFilterOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.3.1.1
ibmringFilterOutNumbermandatory Indicates which ring number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.3.1.2
ibmringFilterOutMaskmandatory Mask to allow ibmringFilterOutNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.4.3.1.3

Table of hop count filtering information.

ibmhopCountFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.5.1.1

Hop count filtering information for a single interface.

Indexes

ibmhopCountFilterIfIndex

Column	Syntax	OID
ibmhopCountFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.5.1.1.1
ibmhopCountFilterBcastTypemandatory Determines what type of incoming frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.5.1.1.2
ibmhopCountFilterCountmandatory The number of hops allowed for incoming frames.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.5.1.1.3

Table of Window filtering information.

ibmwindowFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.6.1.1

Window filtering information for a single interface.

Indexes

ibmwindowFilterType ibmwindowFilterIfIndex

Column	Syntax	OID
ibmwindowFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.6.1.1.1
ibmwindowFilterInBcastTypemandatory For the incoming Window filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.6.1.1.2
ibmwindowFilterOutBcastTypemandatory For the outgoing Window filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.6.1.1.3
ibmwindowFilterInFilterTypemandatory For the incoming filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.6.1.1.4
ibmwindowFilterOutFilterTypemandatory For the outgoing filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.6.1.1.5
ibmwindowFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.6.1.1.6
ibmwindowFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.6.1.1.7
ibmwindowFilterTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.6.1.1.8

Table of Window filtering information
for incoming frames.

ibmwindowFilterInEntry row .1.3.6.1.4.1.2.6.2.7.6.2.1

Filtering information for incoming frames.

Indexes

ibmwindowFilterInType ibmwindowFilterInIfIndex ibmwindowFilterInId ibmwindowFilterInContents

Column	Syntax	OID
ibmwindowFilterInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.6.2.1.1
ibmwindowFilterInContentsmandatory String of bytes that will be compared with bytes in the frame.	OctetString	.1.3.6.1.4.1.2.6.2.7.6.2.1.2
ibmwindowFilterInMaskStringmandatory String of bytes that will be masked with bytes in the contents field.	OctetString	.1.3.6.1.4.1.2.6.2.7.6.2.1.3
ibmwindowFilterInOffsetStartmandatory Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the be…		.1.3.6.1.4.1.2.6.2.7.6.2.1.4
ibmwindowFilterInNumBytesmandatory Number of bytes in the contents field that are used for filtering.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.2.6.2.7.6.2.1.5
ibmwindowFilterInOffsetmandatory Number of bytes offset into the frame from the offset start point to begin the compare.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.2.6.2.7.6.2.1.6
ibmwindowFilterInIdmandatory A unique identifier associated with this window filter entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.6.2.1.7
ibmwindowFilterInTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.6.2.1.8

Table of Window filtering information
for outgoing frames.

ibmwindowFilterOutEntry row .1.3.6.1.4.1.2.6.2.7.6.3.1

Filtering information for outgoing frames.

Indexes

ibmwindowFilterOutType ibmwindowFilterOutIfIndex ibmwindowFilterOutId ibmwindowFilterOutContents

Column	Syntax	OID
ibmwindowFilterOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.6.3.1.1
ibmwindowFilterOutContentsmandatory String of bytes that will be compared with bytes in the frame.	OctetString	.1.3.6.1.4.1.2.6.2.7.6.3.1.2
ibmwindowFilterOutMaskStringmandatory String of bytes that will be masked with bytes in the contents field.	OctetString	.1.3.6.1.4.1.2.6.2.7.6.3.1.3
ibmwindowFilterOutOffsetStartmandatory Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the be…		.1.3.6.1.4.1.2.6.2.7.6.3.1.4
ibmwindowFilterOutNumBytesmandatory Number of bytes in the contents field that are used for filtering.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.2.6.2.7.6.3.1.5
ibmwindowFilterOutOffsetmandatory Number of bytes offset into the frame from the offset start point to begin the compare.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.2.6.2.7.6.3.1.6
ibmwindowFilterOutIdmandatory A unique identifier associated with this window filter entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.6.3.1.7
ibmwindowFilterOutTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.6.3.1.8

Table of information describing which order
the filters are applied for incoming frames.

ibmFiltOrderInEntry row .1.3.6.1.4.1.2.6.2.7.7.1.1

Filter order information for incoming frames.

Indexes

ibmFiltOrderInType ibmFiltrOrderInIfIndex ibmFiltOrderInPriority

Column	Syntax	OID
ibmFiltOrderInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.7.1.1.1
ibmFiltOrderInPrioritymandatory The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.7.1.1.2
ibmFiltOrderInNamemandatory The name of the filter applied to incoming frames that is associated with the priority, ibmFiltOrderInPriority.		.1.3.6.1.4.1.2.6.2.7.7.1.1.3
ibmFiltOrderInTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.7.1.1.4

Table of information describing which order
the filters are applied for outgoing frames.

ibmFiltOrderOutEntry row .1.3.6.1.4.1.2.6.2.7.7.2.1

Filter order information for outgoing frames.

Indexes

ibmFiltOrderOutType ibmFiltOrderOutIfIndex ibmFiltOrderOutPriority

Column	Syntax	OID
ibmFiltOrderOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.7.2.1.1
ibmFiltOrderOutPrioritymandatory The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.7.2.1.2
ibmFiltOrderOutNamemandatory The name of the filter applied to outgoing frames that is associated with the priority, ibmFiltOrderOutPriority.		.1.3.6.1.4.1.2.6.2.7.7.2.1.3
ibmFiltOrderOutTypemandatory The type of entry, either sr or tb.	Enumeration Enumerated Values: 1 sr 2 tb	.1.3.6.1.4.1.2.6.2.7.7.2.1.4

Table of routing information field filtering information.

ibmRIFFilterInfoEntry row .1.3.6.1.4.1.2.6.2.7.8.1.1

Routing information field filtering information for a single interface.

Indexes

ibmRIFFilterIfIndex

Column	Syntax	OID
ibmRIFFilterIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.1.1.1
ibmRIFFilterInBcastTypemandatory For the incoming routing information field filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.8.1.1.2
ibmRIFFilterOutBcastTypemandatory For the outgoing routing information field filter table, determines what type of frames will be filtered.	Enumeration Enumerated Values: 1 filterARB 2 filterSRB 3 filterBoth	.1.3.6.1.4.1.2.6.2.7.8.1.1.3
ibmRIFFilterInFilterTypemandatory For the incoming routing information filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.8.1.1.4
ibmRIFFilterOutFilterTypemandatory For the outgoing routing information field filter table, determines whether the entries are permit or deny entries.	Enumeration Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2.6.2.7.8.1.1.5
ibmRIFFilterInNotForwardedmandatory Number of packets not forwarded, in the incoming direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.8.1.1.6
ibmRIFFilterOutNotForwardedmandatory Number of packets not forwarded, in the outgoing direction, because they were filtered out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.7.8.1.1.7

Table of routing information field filtering information
for incoming frames.

ibmRIFFilterInEntry row .1.3.6.1.4.1.2.6.2.7.8.2.1

Filtering information for a single routing information
field on a single interface.

Indexes

ibmRIFFilterInIfIndex xibmRIFFilterInRingNumber ibmRIFFilterInBridgeNumber

Column	Syntax	OID
ibmRIFFilterInIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.2.1.1
ibmRIFFilterInRingNumbermandatory Indicates which ring number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.2.1.2
ibmRIFFilterInRingMaskmandatory Mask to allow ibmRIFFilterInRingNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.2.1.3
ibmRIFFilterInBridgeNumbermandatory Indicates which bridge number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.2.1.4
ibmRIFFilterInBridgeMaskmandatory Mask to allow ibmRIFFilterInBridgeNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.2.1.5
ibmRIFFilterInRouteDesignatormandatory Indicates which route designators in the routing information field are to be used for filtering.	Enumeration Enumerated Values: 1 firstroutedesignator 2 nexttolastroutedesignator 3 allroutedesignators	.1.3.6.1.4.1.2.6.2.7.8.2.1.6

Table of routing information field filtering information
for outgoing frames.

ibmRIFFilterOutEntry row .1.3.6.1.4.1.2.6.2.7.8.3.1

Filtering information for a single routing information
field on a single interface.

Indexes

ibmRIFFilterOutIfIndex ibmRIFFilterOutRingNumber ibmRIFFilterOutBridgeNumber

Column	Syntax	OID
ibmRIFFilterOutIfIndexmandatory The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interfac…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.3.1.1
ibmRIFFilterOutRingNumbermandatory Indicates which ring number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.3.1.2
ibmRIFFilterOutRingMaskmandatory Mask to allow ibmRIFFilterOutRingNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.3.1.3
ibmRIFFilterOutBridgeNumbermandatory Indicates which bridge number to filter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.3.1.4
ibmRIFFilterOutBridgeMaskmandatory Mask to allow ibmRIFFilterOutBridgeNumber to be used as a range of values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.7.8.3.1.5
ibmRIFFilterOutRouteDesignatormandatory Indicates which route designators in the routing information field are to be used for filtering.	Enumeration Enumerated Values: 1 firstroutedesignator 2 nexttolastroutedesignator 3 allroutedesignators	.1.3.6.1.4.1.2.6.2.7.8.3.1.6

The Parameters for the Data Link Connection Management
Interface corresponding to any given ifEntry.

ibmfrDlcmiEntry row .1.3.6.1.4.1.2.6.2.8.1.1

The Parameters for the Data Link Connection
Management Interface.

Indexes

ibmfrDlcmiIfIndex

Column	Syntax	OID
ibmfrDlcmiIfIndexmandatory The ifIndex value of the corresponding ifEn- try.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.1.1.1
ibmfrDlcmiStatemandatory This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface.	Enumeration Enumerated Values: 1 noLmiConfigured 2 lmiRev1 3 ansiT1-617-D 4 ansiT1-617-B	.1.3.6.1.4.1.2.6.2.8.1.1.2
ibmfrDlcmiAddressmandatory This variable states which address format is in use on the Frame Relay interface.	Enumeration Enumerated Values: 1 q921 2 q922March90 3 q922November90 4 q922	.1.3.6.1.4.1.2.6.2.8.1.1.3
ibmfrDlcmiAddressLenmandatory This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion.	Enumeration Enumerated Values: 2 two-octets 3 three-octets 4 four-octets	.1.3.6.1.4.1.2.6.2.8.1.1.4
ibmfrDlcmiPollingIntervalmandatory This is the number of seconds between succes- sive status enquiry messages.	Integer32 Constraints: range: 5-30	.1.3.6.1.4.1.2.6.2.8.1.1.5
ibmfrDlcmiFullEnquiryIntervalmandatory Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2.6.2.8.1.1.6
ibmfrDlcmiErrorThresholdmandatory This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2.6.2.8.1.1.7
ibmfrDlcmiMonitoredEventsmandatory This is the maximum number of responses to FULL STATUS or LINK INTEGERITY VERIFICATION messages missed before the device will mark the interface down.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2.6.2.8.1.1.8
ibmfrDlcmiMaxSupportedVCsmandatory The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal cap…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.1.1.9
ibmfrDlcmiMulticastmandatory This indicates whether the Frame Relay provid- er offers a Multicast Service.	Enumeration Enumerated Values: 1 nonBroadcast 2 broadcast	.1.3.6.1.4.1.2.6.2.8.1.1.10

A table containing information about specific Data
Link Connection Identifiers and corresponding virtual
circuits.

ibmfrCircuitEntry row .1.3.6.1.4.1.2.6.2.8.2.1

The information regarding a single Data Link
Connection Identifier.

Indexes

ibmfrCircuitIfIndex ibmfrCircuitDlci

Column	Syntax	OID
ibmfrCircuitIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.2.1.1
ibmfrCircuitDlcimandatory The Data Link Connection Identifier for this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.2.1.2
ibmfrCircuitStatemandatory Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state t…	Enumeration Enumerated Values: 1 invalid 2 active 3 inactive	.1.3.6.1.4.1.2.6.2.8.2.1.3
ibmfrCircuitReceivedFECNsmandatory Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.4
ibmfrCircuitReceivedBECNsmandatory Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.5
ibmfrCircuitSentFramesmandatory The number of frames sent from this virtual circuit since it was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.6
ibmfrCircuitSentOctetsmandatory The number of octets sent from this virtual circuit since it was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.7
ibmfrCircuitReceivedFramesmandatory Number of frames received over this virtual circuit since it was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.8
ibmfrCircuitReceivedOctetsmandatory Number of octets received over this virtual circuit since it was created.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.9
ibmfrCircuitCreationTimemandatory The time when this virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. The time value is relative to other times on this interface only.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.10
ibmfrCircuitLastTimeChangemandatory The time when last there was a change in the virtual circuit state. The time value is relative to other times on this interface only.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.2.1.11
ibmfrCircuitCommittedBurstmandatory This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.2.1.12
ibmfrCircuitExcessBurstmandatory This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Ex…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.2.1.13
ibmfrCircuitThroughputmandatory Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.2.1.14

A table containing information about Errors on the
Frame Relay interface.

ibmfrErrEntry row .1.3.6.1.4.1.2.6.2.8.3.1

The error information for a single frame relay
interface.

Indexes

ibmfrErrIfIndex

Column	Syntax	OID
ibmfrErrIfIndexmandatory The ifIndex Value of the corresponding ifEn- try.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.8.3.1.1
ibmfrErrTypemandatory The type of error that was last seen on this interface.	Enumeration Enumerated Values: 1 unknownError 2 receiveShort 3 receiveLong 4 illegalDLCI 5 unknownDLCI 6 dlcmiProtoErr 7 dlcmiUnknownIE 8 dlcmiSequenceErr 9 dlcmiUnknownRpt	.1.3.6.1.4.1.2.6.2.8.3.1.2
ibmfrErrDatamandatory An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU.	OctetString	.1.3.6.1.4.1.2.6.2.8.3.1.3
ibmfrErrTimemandatory The time at which the error was detected. The time value is relative to other times on this interface only.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.8.3.1.4

A table of information regarding all routers
participating in Data Link Switching.

ibmdlsRouterEntry row .1.3.6.1.4.1.2.6.2.9.4.1

Information for a single participating router.

Indexes

ibmdlsRouterAddress

Column	Syntax	OID
ibmdlsRouterAddressmandatory The IP address of the router participating in Data Link Switching.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.9.4.1.1
ibmdlsRouterStatusmandatory The current state of the remote connection	Enumeration Enumerated Values: 1 notActive 2 active	.1.3.6.1.4.1.2.6.2.9.4.1.2
ibmdlsRouterDefinedBymandatory The origin of this entry. user(1) indicates that this router is defined via the Configuration Program. system(2) indicates that this router was defined automatically as a result of a connection request from another rout…	Enumeration Enumerated Values: 1 user 2 system	.1.3.6.1.4.1.2.6.2.9.4.1.3
ibmdlsRouterInFramesmandatory Number of frames received from the partner router.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.4.1.4
ibmdlsRouterOutFramesmandatory Number of frames sent to the partner router.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.4.1.5

The SNA local frame filter table.  This table contains
information regarding the filtering of SNA frames received
from local LAN segments.

ibmdlsLocalFrameFilterEntry row .1.3.6.1.4.1.2.6.2.9.5.1

Filter information for a MAC address source-destination pair.

Indexes

ibmdlsLocalFrameFilterID

Column	Syntax	OID
ibmdlsLocalFrameFilterIDmandatory A unique identifier for this filter.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.5.1.1
ibmdlsLocalFrameFilterSrcAddressmandatory The source MAC address that this filter is applied to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.5.1.2
ibmdlsLocalFrameFilterSrcMaskmandatory A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.5.1.3
ibmdlsLocalFrameFilterDestAddressmandatory The destination MAC address that this filter is applied to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.5.1.4
ibmdlsLocalFrameFilterDestMaskmandatory A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.5.1.5

The SNA remote frame filter table.  This table contains
information regarding the filtering of SNA frames received
from other participating DLS routers.

ibmdlsRemoteFrameFilterEntry row .1.3.6.1.4.1.2.6.2.9.6.1

Filter information for a MAC address source-destination pair.

Indexes

ibmdlsRemoteFrameFilterID

Column	Syntax	OID
ibmdlsRemoteFrameFilterIDmandatory A unique identifier for this filter.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.6.1.1
ibmdlsRemoteFrameFilterSrcAddressmandatory The source MAC address that this filter is applied to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.6.1.2
ibmdlsRemoteFrameFilterSrcMaskmandatory A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.6.1.3
ibmdlsRemoteFrameFilterDestAddressmandatory The destination MAC address that this filter is applied to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.6.1.4
ibmdlsRemoteFrameFilterDestMaskmandatory A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.6.1.5

The NetBIOS local name filter table.  This table contains
information regarding the filtering of NetBIOS frames
received from local LAN segments.

ibmdlsLocalNameFilterEntry row .1.3.6.1.4.1.2.6.2.9.7.1

Filter information for a NetBIOS source-destination
name pair.

Indexes

ibmdlsLocalNameFilterID

Column	Syntax	OID
ibmdlsLocalNameFilterIDmandatory A unique identifier for this filter.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.7.1.1
ibmdlsLocalNameFilterSrcAddressmandatory The source NetBIOS name that this filter is applied to.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2.6.2.9.7.1.2
ibmdlsLocalNameFilterDestAddressmandatory The destination NetBIOS name that this filter is applied to.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2.6.2.9.7.1.3

The NetBIOS name filter table.   This table contains
information regarding the filtering of NetBIOS frames
received from other participating DLS routers.

ibmdlsRemoteNameFilterEntry row .1.3.6.1.4.1.2.6.2.9.8.1

Filter information for a NetBIOS source-destination
name pair.

Indexes

ibmdlsRemoteNameFilterID

Column	Syntax	OID
ibmdlsRemoteNameFilterIDmandatory A unique identifier for this filter.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.8.1.1
ibmdlsRemoteNameFilterSrcAddressmandatory The source NetBIOS name that this filter is applied to.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2.6.2.9.8.1.2
ibmdlsRemoteNameFilterDestAddressmandatory The destination NetBIOS name that this filter is applied to.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2.6.2.9.8.1.3

Table of default routers for MAC addresses.

ibmdlsDefaultDestEntry row .1.3.6.1.4.1.2.6.2.9.9.1

Mapping of a MAC address to a default router.

Indexes

ibmdlsDefaultDestAddress

Column	Syntax	OID
ibmdlsDefaultDestAddressmandatory The destination address that this table entry applies to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.9.1.1
ibmdlsDefaultRouterAddressmandatory The default router used for reaching the destination address in ibmdlsDefaultDestAddress.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.9.9.1.2

Table of default routers for NetBIOS names.

ibmdlsDefaultNBDestEntry row .1.3.6.1.4.1.2.6.2.9.10.1

Mapping of a NetBIOS name to a default router.

Indexes

ibmdlsDefaultNBDestName

Column	Syntax	OID
ibmdlsDefaultNBDestNamemandatory The destination NetBIOS name that this table entry applies to.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2.6.2.9.10.1.1
ibmdlsDefaultNBRouterAddressmandatory The default router used for reaching the destination name in ibmdlsDefaultNBDestName.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.9.10.1.2

Table of configuration information on SNA stations
attached to this router.

ibmdlsStationEntry row .1.3.6.1.4.1.2.6.2.9.11.1

Information on a single SNA station attached to this router.

Indexes

ibmdlsStationIfIndex ibmdlsStationAddress

Column	Syntax	OID
ibmdlsStationIfIndexmandatory The value of IfIndex for the port to which this station is attached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.9.11.1.1
ibmdlsStationAddressmandatory The SDLC address of this station.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2.6.2.9.11.1.2
ibmdlsStationTransmitWindowCountmandatory The number of SDLC information frames to send to this station before turning the line around to get a response.	Integer32 Constraints: range: 1-7	.1.3.6.1.4.1.2.6.2.9.11.1.3
ibmdlsStationRetransmitCountmandatory The number of contiguous information frame bursts that will be transmitted to this station before declaring a permanent transmission error.	Integer32 Constraints: range: 1-50	.1.3.6.1.4.1.2.6.2.9.11.1.4
ibmdlsStationRetransmitThresholdmandatory The number of information frame transmissions allowed as a percentage of total information frame transmissions. The specified rate is the maximum rate of retransmissions allowed above which an error log entry will be ma…	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.11.1.5
ibmdlsStationForceDisconnectTimeoutmandatory The number of seconds that the IBM 6611 will wait after requesting a disconnect from the link (DISC) before forcing a disconnect.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.2.6.2.9.11.1.6
ibmdlsStationMaxIfieldSizemandatory The value in bytes of the maximum I-field size (a multiple of 256 plus 9).	Integer32 Constraints: range: 265-30729	.1.3.6.1.4.1.2.6.2.9.11.1.7
ibmdlsStationPrimaryRepollTimeoutmandatory The length of time (in tenths of seconds) that the primary station will wait for a response from the secondary station.	Integer32 Constraints: range: 1-250	.1.3.6.1.4.1.2.6.2.9.11.1.8
ibmdlsStationPrimaryRepollCountmandatory The number of times that the primary station will poll the secondary station unsuccessfully before marking the station as not working.	Integer32 Constraints: range: 3-50	.1.3.6.1.4.1.2.6.2.9.11.1.9
ibmdlsStationPrimaryRepollThresholdmandatory The number of repolls as a percentage of the total polls sent to the secondary station. The specified percentage equals the maximum rate of repolls allowed, above which the IBM 6611 declares that a temporary error has …	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2.6.2.9.11.1.10
ibmdlsStationPrimarySlowListTimeoutmandatory The number of seconds that the primary station will wait between polls to stations on the slow list.	Integer32 Constraints: range: 1-60	.1.3.6.1.4.1.2.6.2.9.11.1.11
ibmdlsStationSrcAddressmandatory The token ring physical address used for this station.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.11.1.12
ibmdlsStationDestAddressmandatory The token ring physical address to which this station should be connected. If this information is not available the IBM 6611 Network Processor will return a length of zero for this object.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.11.1.13

Table of information on DLS circuits active on this router.

ibmdlsCirEntry row .1.3.6.1.4.1.2.6.2.9.12.1

Information on a DLS circuit.

Indexes

ibmdlsCirIfIndex ibmdlsCirSrcAddress ibmdlsCirSrcSap ibmdlsCirDestAddress ibmdlsCirDestSap

Column	Syntax	OID
ibmdlsCirIfIndexmandatory The value of IfIndex for the interface supporting this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.9.12.1.1
ibmdlsCirSrcAddressmandatory The MAC address of the source of this circuit.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.12.1.2
ibmdlsCirSrcSapmandatory The SAP identifier of the source of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.9.12.1.3
ibmdlsCirDestAddressmandatory The MAC address of the destination of this circuit.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2.6.2.9.12.1.4
ibmdlsCirDestSapmandatory The SAP identifier of the destination of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.9.12.1.5
ibmdlsCirPartnerRouterAddressmandatory The IP address of the partner router used by this circuit.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.9.12.1.6
ibmdlsCirLocalLinkStatemandatory The state of the local link station used by this circuit.	Enumeration Enumerated Values: 1 opening 2 opened 3 closing 4 inactive	.1.3.6.1.4.1.2.6.2.9.12.1.7
ibmdlsCirLocalLinkSubStatemandatory The sub-state of the local link station used by this circuit.	Enumeration Enumerated Values: 1 calling 2 listening 3 contacted 4 localBusy 5 remoteBusy	.1.3.6.1.4.1.2.6.2.9.12.1.8
ibmdlsCirLocalLinkRoutingmandatory The routing information field used by the local link portion of this circuit. The routing information field consists of a 2-byte routing control field and up to eight 2-byte route designators.	OctetString Constraints: range: 4-18	.1.3.6.1.4.1.2.6.2.9.12.1.9
ibmdlsCirLocalLinkTestCmdsSentmandatory The number of test commands sent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.10
ibmdlsCirLocalLinkTestCmdsFailmandatory The number of test commands failed by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.11
ibmdlsCirLocalLinkTestCmdsRcvmandatory The number of test commands received by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.12
ibmdlsCirLocalLinkDataPktSentmandatory The number of sequenced data packets sent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.13
ibmdlsCirLocalLinkDataPktResentmandatory The number of sequenced data packets resent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.14
ibmdlsCirLocalLinkMaxContResentmandatory The maximum number of contiguous resendings by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.15
ibmdlsCirLocalLinkDataPktRcvmandatory The number of sequenced data packets received by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.16
ibmdlsCirLocalLinkInvalidPktRcvmandatory The number of invalid packets received by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.17
ibmdlsCirLocalLinkAdpRcvErrmandatory The number of data-detected receive errors by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.18
ibmdlsCirLocalLinkAdpSendErrmandatory The number of data-detected transmit errors by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.19
ibmdlsCirLocalLinkRcvInactiveTimeoutsmandatory The number of inactivity timeouts received by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.20
ibmdlsCirLocalLinkCmdPollsSentmandatory The number of command polls sent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.21
ibmdlsCirLocalLinkCmdRepollsSentmandatory The number of command repolls sent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.22
ibmdlsCirLocalLinkCmdContRepollsmandatory The number of continuous repolls sent by the local link station used by this circuit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.9.12.1.23
ibmdlsCirLocalAddressmandatory The address (ibmdlsCirSrcAddress or ibmdlsCirDestAddress) that is local on this circuit.	Enumeration Enumerated Values: 1 sourceIsLocal 2 destinationIsLocal	.1.3.6.1.4.1.2.6.2.9.12.1.24

A table containing PPP-link specific control variables
for this managed object.  An entry in this table is
uniquely identified by the ibmpppLinkControlIndex value
comprised by said entry.

ibmpppLinkControlEntry row .1.3.6.1.4.1.2.6.2.10.1.1

Management control information about a particular PPP
Link.

Indexes

ibmpppLinkControlIndex

Column	Syntax	OID
ibmpppLinkControlIndexmandatory A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. Th…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.1
ibmpppLinkCRCSizemandatory Number of bits used in the CRC on this link. See section 3.1, 'Frame Check Sequence (FCS) Field' on page 5 of RFC 1171. Setting this object to a new value will have effect when this link is next restarted.	Enumeration Enumerated Values: 16 ppp-crc-16 32 ppp-crc-32	.1.3.6.1.4.1.2.6.2.10.1.1.2
ibmpppLinkRestartTimerValuemandatory The value used for the Restart Timer. It is in units of hundredths of a second. See section 4.3, 'Timers and Counters' on page 20 of RFC 1171.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.3
ibmpppLinkMaxRestartsmandatory The Max-Restarts parameter described in section 4.3, 'Timers and Counters' on page 20 of RFC 1171.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.4
ibmpppLinkLocalMRUmandatory The MRU (Maximum Receive Unit) of this node on the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will have effect when the link is next restarted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.5
ibmpppLinkRemoteMRUmandatory What this node believes is the MRU for the node on the other end of the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will immediately cause the local node to use the new MRU w…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.6
ibmpppLinkLocalACCMapmandatory The (ACC) Asynchronous-Control-Character-Map for this node. This is the ACC Map that the node on the other end of the link will use when building a packet to send to this node. See section 2.2, page 3, 'Async-Control-…	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.2.6.2.10.1.1.7
ibmpppLinkRemoteACCMapmandatory The (ACC) Asynchronous-Control-Character-Map that this node uses when building a packet to send to the node on the other end of the link. See section 2.2, page 3, 'Async-Control-Character-Map' of RFC 1172. …	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.2.6.2.10.1.1.8
ibmpppLinkMagicLoopCountmandatory The number of times that this node will do a Magic Number Configuration before deciding that the link is looped back. 0 indicates that the node does not do Magic Number Configuration. -1 indicates that it tries forever…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.10.1.1.9
ibmpppLinkCommandmandatory See section 4.14 on page 13 of RFC 1171. Reading from this variable will return no-op(1). The IBM 6611 Network Processor always provides a value of no-op(1) for this object.	Enumeration Enumerated Values: 1 no-op 2 close	.1.3.6.1.4.1.2.6.2.10.1.1.10